diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-28 09:13:47 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-28 09:13:47 +0000 |
commit | 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 (patch) | |
tree | bcf648efac40ca6139842707f0eba5a4496a6dd2 /plat/arm/board/fvp/sp_min | |
parent | Initial commit. (diff) | |
download | arm-trusted-firmware-102b0d2daa97dae68d3eed54d8fe37a9cc38a892.tar.xz arm-trusted-firmware-102b0d2daa97dae68d3eed54d8fe37a9cc38a892.zip |
Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'plat/arm/board/fvp/sp_min')
-rw-r--r-- | plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c | 121 | ||||
-rw-r--r-- | plat/arm/board/fvp/sp_min/sp_min-fvp.mk | 39 |
2 files changed, 160 insertions, 0 deletions
diff --git a/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c b/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c new file mode 100644 index 0000000..9ab36a6 --- /dev/null +++ b/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c @@ -0,0 +1,121 @@ +/* + * Copyright (c) 2016-2022, Arm Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <assert.h> + +#include <bl32/sp_min/platform_sp_min.h> +#include <common/debug.h> +#include <lib/fconf/fconf.h> +#include <lib/fconf/fconf_dyn_cfg_getter.h> +#include <plat/arm/common/plat_arm.h> + +#include "../fvp_private.h" + +void plat_arm_sp_min_early_platform_setup(u_register_t arg0, u_register_t arg1, + u_register_t arg2, u_register_t arg3) +{ + const struct dyn_cfg_dtb_info_t *tos_fw_config_info __unused; + + /* Initialize the console to provide early debug support */ + arm_console_boot_init(); + +#if !RESET_TO_SP_MIN && !BL2_AT_EL3 + + INFO("SP_MIN FCONF: FW_CONFIG address = %lx\n", (uintptr_t)arg1); + /* Fill the properties struct with the info from the config dtb */ + fconf_populate("FW_CONFIG", arg1); + + tos_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TOS_FW_CONFIG_ID); + if (tos_fw_config_info != NULL) { + arg1 = tos_fw_config_info->config_addr; + } +#endif /* !RESET_TO_SP_MIN && !BL2_AT_EL3 */ + + arm_sp_min_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3); + + /* Initialize the platform config for future decision making */ + fvp_config_setup(); + + /* + * Initialize the correct interconnect for this cluster during cold + * boot. No need for locks as no other CPU is active. + */ + fvp_interconnect_init(); + + /* + * Enable coherency in interconnect for the primary CPU's cluster. + * Earlier bootloader stages might already do this (e.g. Trusted + * Firmware's BL1 does it) but we can't assume so. There is no harm in + * executing this code twice anyway. + * FVP PSCI code will enable coherency for other clusters. + */ + fvp_interconnect_enable(); +} + +void sp_min_plat_arch_setup(void) +{ + int rc __unused; + const struct dyn_cfg_dtb_info_t *hw_config_info __unused; + uintptr_t hw_config_base_align __unused; + size_t mapped_size_align __unused; + + arm_sp_min_plat_arch_setup(); + + /* + * For RESET_TO_SP_MIN systems, SP_MIN(BL32) is the first bootloader + * to run. So there is no BL2 to load the HW_CONFIG dtb into memory + * before control is passed to SP_MIN. + * Also, BL2 skips loading HW_CONFIG dtb for BL2_AT_EL3 builds. + * The code below relies on dynamic mapping capability, which is not + * supported by xlat tables lib V1. + * TODO: remove the ARM_XLAT_TABLES_LIB_V1 check when its support + * gets deprecated. + */ +#if !RESET_TO_SP_MIN && !BL2_AT_EL3 && !ARM_XLAT_TABLES_LIB_V1 + hw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, HW_CONFIG_ID); + assert(hw_config_info != NULL); + assert(hw_config_info->config_addr != 0UL); + + INFO("SP_MIN FCONF: HW_CONFIG address = %p\n", + (void *)hw_config_info->config_addr); + + /* + * Preferrably we expect this address and size are page aligned, + * but if they are not then align it. + */ + hw_config_base_align = page_align(hw_config_info->config_addr, DOWN); + mapped_size_align = page_align(hw_config_info->config_max_size, UP); + + if ((hw_config_info->config_addr != hw_config_base_align) && + (hw_config_info->config_max_size == mapped_size_align)) { + mapped_size_align += PAGE_SIZE; + } + + /* + * map dynamically HW config region with its aligned base address and + * size + */ + rc = mmap_add_dynamic_region((unsigned long long)hw_config_base_align, + hw_config_base_align, + mapped_size_align, + MT_RO_DATA); + if (rc != 0) { + ERROR("Error while mapping HW_CONFIG device tree (%d).\n", rc); + panic(); + } + + /* Populate HW_CONFIG device tree with the mapped address */ + fconf_populate("HW_CONFIG", hw_config_info->config_addr); + + /* unmap the HW_CONFIG memory region */ + rc = mmap_remove_dynamic_region(hw_config_base_align, mapped_size_align); + if (rc != 0) { + ERROR("Error while unmapping HW_CONFIG device tree (%d).\n", + rc); + panic(); + } +#endif /* !RESET_TO_SP_MIN && !BL2_AT_EL3 && !ARM_XLAT_TABLES_LIB_V1 */ +} diff --git a/plat/arm/board/fvp/sp_min/sp_min-fvp.mk b/plat/arm/board/fvp/sp_min/sp_min-fvp.mk new file mode 100644 index 0000000..183d802 --- /dev/null +++ b/plat/arm/board/fvp/sp_min/sp_min-fvp.mk @@ -0,0 +1,39 @@ +# +# Copyright (c) 2016-2022, Arm Limited and Contributors. All rights reserved. +# +# SPDX-License-Identifier: BSD-3-Clause +# + +include common/fdt_wrappers.mk + +# SP_MIN source files specific to FVP platform +BL32_SOURCES += drivers/arm/fvp/fvp_pwrc.c \ + drivers/cfi/v2m/v2m_flash.c \ + lib/utils/mem_region.c \ + plat/arm/board/fvp/aarch32/fvp_helpers.S \ + plat/arm/board/fvp/fvp_pm.c \ + plat/arm/board/fvp/fvp_console.c \ + plat/arm/board/fvp/fvp_topology.c \ + plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c \ + plat/arm/common/arm_nor_psci_mem_protect.c \ + ${FVP_CPU_LIBS} \ + ${FVP_GIC_SOURCES} \ + ${FVP_INTERCONNECT_SOURCES} \ + ${FVP_SECURITY_SOURCES} + +# Support for fconf in SP_MIN(BL32) +# Added separately from the above list for better readability +ifeq ($(filter 1,${BL2_AT_EL3} ${RESET_TO_SP_MIN}),) +BL32_SOURCES += lib/fconf/fconf.c \ + lib/fconf/fconf_dyn_cfg_getter.c \ + plat/arm/board/fvp/fconf/fconf_hw_config_getter.c \ + +BL32_SOURCES += ${FDT_WRAPPERS_SOURCES} + +ifeq (${SEC_INT_DESC_IN_FCONF},1) +BL32_SOURCES += plat/arm/common/fconf/fconf_sec_intr_config.c +endif + +endif + +include plat/arm/common/sp_min/arm_sp_min.mk |