Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 202 insertions, 0 deletions

diff --git a/plat/brcm/common/brcm_bl2_setup.c b/plat/brcm/common/brcm_bl2_setup.c
new file mode 100644
index 0000000..9a7153b
--- /dev/null
+++ b/plat/brcm/common/brcm_bl2_setup.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <drivers/arm/sp804_delay_timer.h>
+#include <lib/mmio.h>
+
+#include <bcm_console.h>
+#include <platform_def.h>
+#include <plat/brcm/common/plat_brcm.h>
+
+/* Data structure which holds the extents of the trusted SRAM for BL2 */
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+/* Weak definitions may be overridden in specific BRCM platform */
+#pragma weak plat_bcm_bl2_platform_setup
+#pragma weak plat_bcm_bl2_plat_arch_setup
+#pragma weak plat_bcm_security_setup
+#pragma weak plat_bcm_bl2_plat_handle_scp_bl2
+#pragma weak plat_bcm_bl2_early_platform_setup
+
+void plat_bcm_bl2_early_platform_setup(void)
+{
+}
+
+void plat_bcm_bl2_platform_setup(void)
+{
+}
+
+void plat_bcm_bl2_plat_arch_setup(void)
+{
+}
+
+void plat_bcm_security_setup(void)
+{
+}
+
+void bcm_bl2_early_platform_setup(uintptr_t tb_fw_config,
+				  meminfo_t *mem_layout)
+{
+	/* Initialize the console to provide early debug support */
+	bcm_console_boot_init();
+
+	/* Setup the BL2 memory layout */
+	bl2_tzram_layout = *mem_layout;
+
+	/* Initialise the IO layer and register platform IO devices */
+	plat_brcm_io_setup();
+
+	/* Log HW reset event */
+	INFO("RESET: 0x%x\n",
+		mmio_read_32(CRMU_RESET_EVENT_LOG));
+}
+
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			       u_register_t arg2, u_register_t arg3)
+{
+	/* SoC specific setup */
+	plat_bcm_bl2_early_platform_setup();
+
+	/* Initialize delay timer driver using SP804 dual timer 0 */
+	sp804_timer_init(SP804_TIMER0_BASE,
+			 SP804_TIMER0_CLKMULT, SP804_TIMER0_CLKDIV);
+
+	/* BRCM platforms generic setup */
+	bcm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
+}
+
+/*
+ * Perform Broadcom platform setup.
+ */
+void bcm_bl2_platform_setup(void)
+{
+	/* Initialize the secure environment */
+	plat_bcm_security_setup();
+}
+
+void bl2_platform_setup(void)
+{
+	bcm_bl2_platform_setup();
+	plat_bcm_bl2_platform_setup();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only initializes the mmu in a quick and dirty way.
+ ******************************************************************************/
+void bcm_bl2_plat_arch_setup(void)
+{
+#ifndef MMU_DISABLED
+	if (!(read_sctlr_el1() & SCTLR_M_BIT)) {
+		const mmap_region_t bl_regions[] = {
+			MAP_REGION_FLAT(bl2_tzram_layout.total_base,
+					bl2_tzram_layout.total_size,
+					MT_MEMORY | MT_RW | MT_SECURE),
+			MAP_REGION_FLAT(BL_CODE_BASE,
+					BL_CODE_END - BL_CODE_BASE,
+					MT_CODE | MT_SECURE),
+			MAP_REGION_FLAT(BL_RO_DATA_BASE,
+					BL_RO_DATA_END - BL_RO_DATA_BASE,
+					MT_RO_DATA | MT_SECURE),
+#if USE_COHERENT_MEM
+			MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
+					BL_COHERENT_RAM_END -
+					BL_COHERENT_RAM_BASE,
+					MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+			{0}
+		};
+
+		setup_page_tables(bl_regions, plat_brcm_get_mmap());
+		enable_mmu_el1(0);
+	}
+#endif
+}
+
+void bl2_plat_arch_setup(void)
+{
+#ifdef ENA_MMU_BEFORE_DDR_INIT
+	/*
+	 * Once MMU is enabled before DDR, MEMORY TESTS
+	 * get affected as read/write transaction might occures from
+	 * caches. So For running memory test, one should not set this
+	 * flag.
+	 */
+	bcm_bl2_plat_arch_setup();
+	plat_bcm_bl2_plat_arch_setup();
+#else
+	plat_bcm_bl2_plat_arch_setup();
+	bcm_bl2_plat_arch_setup();
+#endif
+}
+
+int bcm_bl2_handle_post_image_load(unsigned int image_id)
+{
+	int err = 0;
+
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+
+	assert(bl_mem_params);
+
+	switch (image_id) {
+	case BL32_IMAGE_ID:
+		bl_mem_params->ep_info.spsr = brcm_get_spsr_for_bl32_entry();
+		break;
+
+	case BL33_IMAGE_ID:
+		/* BL33 expects to receive the primary CPU MPID (through r0) */
+		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+		bl_mem_params->ep_info.spsr = brcm_get_spsr_for_bl33_entry();
+		break;
+
+#ifdef SCP_BL2_BASE
+	case SCP_BL2_IMAGE_ID:
+		/* The subsequent handling of SCP_BL2 is platform specific */
+		err = bcm_bl2_handle_scp_bl2(&bl_mem_params->image_info);
+		if (err)
+			WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
+		break;
+#endif
+	default:
+		/* Do nothing in default case */
+		break;
+	}
+
+	return err;
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bcm_bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return bcm_bl2_handle_post_image_load(image_id);
+}
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return bcm_bl2_plat_handle_post_image_load(image_id);
+}
+
+#ifdef SCP_BL2_BASE
+int plat_bcm_bl2_plat_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+	return 0;
+}
+
+int bcm_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+	return plat_bcm_bl2_plat_handle_scp_bl2(scp_bl2_image_info);
+}
+#endif