Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 370 insertions, 0 deletions

diff --git a/plat/common/plat_gicv3.c b/plat/common/plat_gicv3.c
new file mode 100644
index 0000000..e1420bb
--- /dev/null
+++ b/plat/common/plat_gicv3.c
@@ -0,0 +1,370 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Portions copyright (c) 2021-2022, ProvenRun S.A.S. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdbool.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <bl31/interrupt_mgmt.h>
+#include <drivers/arm/gic_common.h>
+#include <drivers/arm/gicv3.h>
+#include <lib/cassert.h>
+#include <plat/common/platform.h>
+
+#ifdef IMAGE_BL31
+
+/*
+ * The following platform GIC functions are weakly defined. They
+ * provide typical implementations that may be re-used by multiple
+ * platforms but may also be overridden by a platform if required.
+ */
+#pragma weak plat_ic_get_pending_interrupt_id
+#pragma weak plat_ic_get_pending_interrupt_type
+#pragma weak plat_ic_acknowledge_interrupt
+#pragma weak plat_ic_get_interrupt_type
+#pragma weak plat_ic_end_of_interrupt
+#pragma weak plat_interrupt_type_to_line
+
+#pragma weak plat_ic_get_running_priority
+#pragma weak plat_ic_is_spi
+#pragma weak plat_ic_is_ppi
+#pragma weak plat_ic_is_sgi
+#pragma weak plat_ic_get_interrupt_active
+#pragma weak plat_ic_enable_interrupt
+#pragma weak plat_ic_disable_interrupt
+#pragma weak plat_ic_set_interrupt_priority
+#pragma weak plat_ic_set_interrupt_type
+#pragma weak plat_ic_raise_el3_sgi
+#pragma weak plat_ic_raise_ns_sgi
+#pragma weak plat_ic_raise_s_el1_sgi
+#pragma weak plat_ic_set_spi_routing
+#pragma weak plat_ic_set_interrupt_pending
+#pragma weak plat_ic_clear_interrupt_pending
+
+CASSERT((INTR_TYPE_S_EL1 == INTR_GROUP1S) &&
+	(INTR_TYPE_NS == INTR_GROUP1NS) &&
+	(INTR_TYPE_EL3 == INTR_GROUP0), assert_interrupt_type_mismatch);
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller
+ */
+uint32_t plat_ic_get_pending_interrupt_id(void)
+{
+	unsigned int irqnr;
+
+	assert(IS_IN_EL3());
+	irqnr = gicv3_get_pending_interrupt_id();
+	return gicv3_is_intr_id_special_identifier(irqnr) ?
+				INTR_ID_UNAVAILABLE : irqnr;
+}
+
+/*
+ * This function returns the type of the highest priority pending interrupt
+ * at the Interrupt controller. In the case of GICv3, the Highest Priority
+ * Pending interrupt system register (`ICC_HPPIR0_EL1`) is read to determine
+ * the id of the pending interrupt. The type of interrupt depends upon the
+ * id value as follows.
+ *   1. id = PENDING_G1S_INTID (1020) is reported as a S-EL1 interrupt
+ *   2. id = PENDING_G1NS_INTID (1021) is reported as a Non-secure interrupt.
+ *   3. id = GIC_SPURIOUS_INTERRUPT (1023) is reported as an invalid interrupt
+ *           type.
+ *   4. All other interrupt id's are reported as EL3 interrupt.
+ */
+uint32_t plat_ic_get_pending_interrupt_type(void)
+{
+	unsigned int irqnr;
+	uint32_t type;
+
+	assert(IS_IN_EL3());
+	irqnr = gicv3_get_pending_interrupt_type();
+
+	switch (irqnr) {
+	case PENDING_G1S_INTID:
+		type = INTR_TYPE_S_EL1;
+		break;
+	case PENDING_G1NS_INTID:
+		type = INTR_TYPE_NS;
+		break;
+	case GIC_SPURIOUS_INTERRUPT:
+		type = INTR_TYPE_INVAL;
+		break;
+	default:
+		type = INTR_TYPE_EL3;
+		break;
+	}
+
+	return type;
+}
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller and indicates to the Interrupt controller
+ * that the interrupt processing has started.
+ */
+uint32_t plat_ic_acknowledge_interrupt(void)
+{
+	assert(IS_IN_EL3());
+	return gicv3_acknowledge_interrupt();
+}
+
+/*
+ * This function returns the type of the interrupt `id`, depending on how
+ * the interrupt has been configured in the interrupt controller
+ */
+uint32_t plat_ic_get_interrupt_type(uint32_t id)
+{
+	assert(IS_IN_EL3());
+	return gicv3_get_interrupt_type(id, plat_my_core_pos());
+}
+
+/*
+ * This functions is used to indicate to the interrupt controller that
+ * the processing of the interrupt corresponding to the `id` has
+ * finished.
+ */
+void plat_ic_end_of_interrupt(uint32_t id)
+{
+	assert(IS_IN_EL3());
+	gicv3_end_of_interrupt(id);
+}
+
+/*
+ * An ARM processor signals interrupt exceptions through the IRQ and FIQ pins.
+ * The interrupt controller knows which pin/line it uses to signal a type of
+ * interrupt. It lets the interrupt management framework determine for a type of
+ * interrupt and security state, which line should be used in the SCR_EL3 to
+ * control its routing to EL3. The interrupt line is represented as the bit
+ * position of the IRQ or FIQ bit in the SCR_EL3.
+ */
+uint32_t plat_interrupt_type_to_line(uint32_t type,
+				uint32_t security_state)
+{
+	assert((type == INTR_TYPE_S_EL1) ||
+	       (type == INTR_TYPE_EL3) ||
+	       (type == INTR_TYPE_NS));
+
+	assert(sec_state_is_valid(security_state));
+	assert(IS_IN_EL3());
+
+	switch (type) {
+	case INTR_TYPE_S_EL1:
+		/*
+		 * The S-EL1 interrupts are signaled as IRQ in S-EL0/1 contexts
+		 * and as FIQ in the NS-EL0/1/2 contexts
+		 */
+		if (security_state == SECURE)
+			return __builtin_ctz(SCR_IRQ_BIT);
+		else
+			return __builtin_ctz(SCR_FIQ_BIT);
+		assert(0); /* Unreachable */
+	case INTR_TYPE_NS:
+		/*
+		 * The Non secure interrupts will be signaled as FIQ in S-EL0/1
+		 * contexts and as IRQ in the NS-EL0/1/2 contexts.
+		 */
+		if (security_state == SECURE)
+			return __builtin_ctz(SCR_FIQ_BIT);
+		else
+			return __builtin_ctz(SCR_IRQ_BIT);
+		assert(0); /* Unreachable */
+	case INTR_TYPE_EL3:
+		/*
+		 * The EL3 interrupts are signaled as FIQ in both S-EL0/1 and
+		 * NS-EL0/1/2 contexts
+		 */
+		return __builtin_ctz(SCR_FIQ_BIT);
+	default:
+		panic();
+	}
+}
+
+unsigned int plat_ic_get_running_priority(void)
+{
+	return gicv3_get_running_priority();
+}
+
+int plat_ic_is_spi(unsigned int id)
+{
+	return (id >= MIN_SPI_ID) && (id <= MAX_SPI_ID);
+}
+
+int plat_ic_is_ppi(unsigned int id)
+{
+	return (id >= MIN_PPI_ID) && (id < MIN_SPI_ID);
+}
+
+int plat_ic_is_sgi(unsigned int id)
+{
+	return (id >= MIN_SGI_ID) && (id < MIN_PPI_ID);
+}
+
+unsigned int plat_ic_get_interrupt_active(unsigned int id)
+{
+	return gicv3_get_interrupt_active(id, plat_my_core_pos());
+}
+
+void plat_ic_enable_interrupt(unsigned int id)
+{
+	gicv3_enable_interrupt(id, plat_my_core_pos());
+}
+
+void plat_ic_disable_interrupt(unsigned int id)
+{
+	gicv3_disable_interrupt(id, plat_my_core_pos());
+}
+
+void plat_ic_set_interrupt_priority(unsigned int id, unsigned int priority)
+{
+	gicv3_set_interrupt_priority(id, plat_my_core_pos(), priority);
+}
+
+int plat_ic_has_interrupt_type(unsigned int type)
+{
+	assert((type == INTR_TYPE_EL3) || (type == INTR_TYPE_S_EL1) ||
+			(type == INTR_TYPE_NS));
+	return 1;
+}
+
+void plat_ic_set_interrupt_type(unsigned int id, unsigned int type)
+{
+	gicv3_set_interrupt_type(id, plat_my_core_pos(), type);
+}
+
+void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target)
+{
+	/* Target must be a valid MPIDR in the system */
+	assert(plat_core_pos_by_mpidr(target) >= 0);
+
+	/* Verify that this is a secure EL3 SGI */
+	assert(plat_ic_get_interrupt_type((unsigned int)sgi_num) ==
+					  INTR_TYPE_EL3);
+
+	gicv3_raise_sgi((unsigned int)sgi_num, GICV3_G0, target);
+}
+
+void plat_ic_raise_ns_sgi(int sgi_num, u_register_t target)
+{
+	/* Target must be a valid MPIDR in the system */
+	assert(plat_core_pos_by_mpidr(target) >= 0);
+
+	/* Verify that this is a non-secure SGI */
+	assert(plat_ic_get_interrupt_type((unsigned int)sgi_num) ==
+					  INTR_TYPE_NS);
+
+	gicv3_raise_sgi((unsigned int)sgi_num, GICV3_G1NS, target);
+}
+
+void plat_ic_raise_s_el1_sgi(int sgi_num, u_register_t target)
+{
+	/* Target must be a valid MPIDR in the system */
+	assert(plat_core_pos_by_mpidr(target) >= 0);
+
+	/* Verify that this is a secure EL1 SGI */
+	assert(plat_ic_get_interrupt_type((unsigned int)sgi_num) ==
+					  INTR_TYPE_S_EL1);
+
+	gicv3_raise_sgi((unsigned int)sgi_num, GICV3_G1S, target);
+}
+
+void plat_ic_set_spi_routing(unsigned int id, unsigned int routing_mode,
+		u_register_t mpidr)
+{
+	unsigned int irm = 0;
+
+	switch (routing_mode) {
+	case INTR_ROUTING_MODE_PE:
+		assert(plat_core_pos_by_mpidr(mpidr) >= 0);
+		irm = GICV3_IRM_PE;
+		break;
+	case INTR_ROUTING_MODE_ANY:
+		irm = GICV3_IRM_ANY;
+		break;
+	default:
+		assert(0); /* Unreachable */
+		break;
+	}
+
+	gicv3_set_spi_routing(id, irm, mpidr);
+}
+
+void plat_ic_set_interrupt_pending(unsigned int id)
+{
+	/* Disallow setting SGIs pending */
+	assert(id >= MIN_PPI_ID);
+	gicv3_set_interrupt_pending(id, plat_my_core_pos());
+}
+
+void plat_ic_clear_interrupt_pending(unsigned int id)
+{
+	/* Disallow setting SGIs pending */
+	assert(id >= MIN_PPI_ID);
+	gicv3_clear_interrupt_pending(id, plat_my_core_pos());
+}
+
+unsigned int plat_ic_set_priority_mask(unsigned int mask)
+{
+	return gicv3_set_pmr(mask);
+}
+
+unsigned int plat_ic_get_interrupt_id(unsigned int raw)
+{
+	unsigned int id = raw & INT_ID_MASK;
+
+	return gicv3_is_intr_id_special_identifier(id) ?
+			INTR_ID_UNAVAILABLE : id;
+}
+#endif
+#ifdef IMAGE_BL32
+
+#pragma weak plat_ic_get_pending_interrupt_id
+#pragma weak plat_ic_acknowledge_interrupt
+#pragma weak plat_ic_end_of_interrupt
+
+/* In AArch32, the secure group1 interrupts are targeted to Secure PL1 */
+#ifndef __aarch64__
+#define IS_IN_EL1()	IS_IN_SECURE()
+#endif
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller
+ */
+uint32_t plat_ic_get_pending_interrupt_id(void)
+{
+	unsigned int irqnr;
+
+	assert(IS_IN_EL1());
+	irqnr = gicv3_get_pending_interrupt_id_sel1();
+	return (irqnr == GIC_SPURIOUS_INTERRUPT) ?
+				INTR_ID_UNAVAILABLE : irqnr;
+}
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller and indicates to the Interrupt controller
+ * that the interrupt processing has started.
+ */
+uint32_t plat_ic_acknowledge_interrupt(void)
+{
+	assert(IS_IN_EL1());
+	return gicv3_acknowledge_interrupt_sel1();
+}
+
+/*
+ * This functions is used to indicate to the interrupt controller that
+ * the processing of the interrupt corresponding to the `id` has
+ * finished.
+ */
+void plat_ic_end_of_interrupt(uint32_t id)
+{
+	assert(IS_IN_EL1());
+	gicv3_end_of_interrupt_sel1(id);
+}
+#endif