Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 455 insertions, 0 deletions

diff --git a/plat/hisilicon/poplar/include/hi3798cv200.h b/plat/hisilicon/poplar/include/hi3798cv200.h
new file mode 100644
index 0000000..e31f4b3
--- /dev/null
+++ b/plat/hisilicon/poplar/include/hi3798cv200.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef HI3798CV200_H
+#define HI3798CV200_H
+
+#include <lib/utils_def.h>
+
+/* PL011 */
+#define PL011_UART0_BASE		(0xF8B00000)
+#define PL011_BAUDRATE			(115200)
+#define PL011_UART0_CLK_IN_HZ		(75000000)
+
+/* Sys Counter */
+#define SYS_COUNTER_FREQ_IN_TICKS	(24000000)
+#define SYS_COUNTER_FREQ_IN_MHZ		(24)
+
+/* Timer */
+#define SEC_TIMER0_BASE			(0xF8008000)
+#define TIMER00_LOAD			(SEC_TIMER0_BASE + 0x000)
+#define TIMER00_VALUE			(SEC_TIMER0_BASE + 0x004)
+#define TIMER00_CONTROL			(SEC_TIMER0_BASE + 0x008)
+#define TIMER00_BGLOAD			(SEC_TIMER0_BASE + 0x018)
+
+#define SEC_TIMER2_BASE			(0xF8009000)
+#define TIMER20_LOAD			(SEC_TIMER2_BASE + 0x000)
+#define TIMER20_VALUE			(SEC_TIMER2_BASE + 0x004)
+#define TIMER20_CONTROL			(SEC_TIMER2_BASE + 0x008)
+#define TIMER20_BGLOAD			(SEC_TIMER2_BASE + 0x018)
+
+/* GPIO */
+#define	GPIO_MAX			(13)
+#define	GPIO_BASE(x)			(x != 5 ?			\
+					0xf820000 + x * 0x1000 : 0xf8004000)
+
+/* SCTL */
+#define REG_BASE_SCTL			(0xF8000000)
+#define REG_SC_GEN12			(0x00B0)
+
+/* CRG */
+#define REG_BASE_CRG			(0xF8A22000)
+#define REG_CPU_LP			(0x48)
+#define REG_CPU_RST			(0x50)
+#define REG_PERI_CRG39			(0x9C)
+#define REG_PERI_CRG40			(0xA0)
+
+/* MCI */
+#define REG_BASE_MCI			(0xF9830000)
+#define MCI_CDETECT			(0x50)
+#define MCI_VERID			(0x6C)
+#define MCI_VERID_VALUE			(0x5342250A)
+#define MCI_VERID_VALUE2		(0x5342270A)
+
+/* EMMC */
+#define REG_EMMC_PERI_CRG		REG_PERI_CRG40
+#define REG_SDCARD_PERI_CRG		REG_PERI_CRG39
+#define EMMC_CLK_MASK			(0x7 << 8)
+#define EMMC_SRST_REQ			(0x1 << 4)
+#define EMMC_CKEN			(0x1 << 1)
+#define EMMC_BUS_CKEN			(0x1 << 0)
+#define EMMC_CLK_100M			(0 << 8)
+#define EMMC_CLK_50M			(1 << 8)
+#define EMMC_CLK_25M			(2 << 8)
+
+#define EMMC_DESC_SIZE			U(0x00100000) /* 1MB */
+#define EMMC_INIT_PARAMS(base)				\
+	{	.bus_width = MMC_BUS_WIDTH_8,		\
+		.clk_rate = 25 * 1000 * 1000,		\
+		.desc_base = (base),	\
+		.desc_size = EMMC_DESC_SIZE,		\
+		.flags =  MMC_FLAG_CMD23,		\
+		.reg_base = REG_BASE_MCI,		\
+	}
+
+/* GIC-400 */
+#define GICD_BASE			(0xF1001000)
+#define GICC_BASE			(0xF1002000)
+#define GICR_BASE			(0xF1000000)
+
+/* FIQ platform related define */
+#define HISI_IRQ_SEC_SGI_0		8
+#define HISI_IRQ_SEC_SGI_1		9
+#define HISI_IRQ_SEC_SGI_2		10
+#define HISI_IRQ_SEC_SGI_3		11
+#define HISI_IRQ_SEC_SGI_4		12
+#define HISI_IRQ_SEC_SGI_5		13
+#define HISI_IRQ_SEC_SGI_6		14
+#define HISI_IRQ_SEC_SGI_7		15
+#define HISI_IRQ_SEC_PPI_0		29
+#define HISI_IRQ_SEC_TIMER0		60
+#define HISI_IRQ_SEC_TIMER1		50
+#define HISI_IRQ_SEC_TIMER2		52
+#define HISI_IRQ_SEC_TIMER3		88
+#define HISI_IRQ_SEC_AXI		110
+
+/* Watchdog */
+#define HISI_WDG0_BASE			(0xF8A2C000)
+
+#define HISI_TZPC_BASE			(0xF8A80000)
+#define HISI_TZPC_SEC_ATTR_CTRL		(HISI_TZPC_BASE + 0x10)
+
+#endif /* HI3798CV200_H */
diff --git a/plat/hisilicon/poplar/include/plat_macros.S b/plat/hisilicon/poplar/include/plat_macros.S
new file mode 100644
index 0000000..82d10c1
--- /dev/null
+++ b/plat/hisilicon/poplar/include/plat_macros.S
@@ -0,0 +1,10 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+.section .rodata.gic_reg_name, "aS"
+	.macro plat_crash_print_regs
+	nop
+	.endm
diff --git a/plat/hisilicon/poplar/include/plat_private.h b/plat/hisilicon/poplar/include/plat_private.h
new file mode 100644
index 0000000..a34f138
--- /dev/null
+++ b/plat/hisilicon/poplar/include/plat_private.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_PRIVATE_H
+#define PLAT_PRIVATE_H
+
+#include <common/bl_common.h>
+
+#include "hi3798cv200.h"
+
+void plat_configure_mmu_el3(unsigned long total_base,
+			    unsigned long total_size,
+			    unsigned long ro_start,
+			    unsigned long ro_limit,
+			    unsigned long coh_start,
+			    unsigned long coh_limit);
+
+void plat_configure_mmu_el1(unsigned long total_base,
+			    unsigned long total_size,
+			    unsigned long ro_start,
+			    unsigned long ro_limit,
+			    unsigned long coh_start,
+			    unsigned long coh_limit);
+
+void plat_io_setup(void);
+
+unsigned int poplar_calc_core_pos(u_register_t mpidr);
+
+void poplar_gic_driver_init(void);
+void poplar_gic_init(void);
+void poplar_gic_cpuif_enable(void);
+void poplar_gic_pcpu_init(void);
+
+#endif /* PLAT_PRIVATE_H */
diff --git a/plat/hisilicon/poplar/include/platform_def.h b/plat/hisilicon/poplar/include/platform_def.h
new file mode 100644
index 0000000..ce0fbbc
--- /dev/null
+++ b/plat/hisilicon/poplar/include/platform_def.h
@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <arch.h>
+#include <common/interrupt_props.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <drivers/arm/gic_common.h>
+#include <lib/utils_def.h>
+#include <plat/common/common_def.h>
+
+#include "hi3798cv200.h"
+#include "poplar_layout.h"		/* BL memory region sizes, etc */
+
+/* Special value used to verify platform parameters from BL2 to BL3-1 */
+#define POPLAR_BL31_PLAT_PARAM_VAL	0x0f1e2d3c4b5a6978ULL
+
+#define PLATFORM_LINKER_FORMAT		"elf64-littleaarch64"
+#define PLATFORM_LINKER_ARCH		aarch64
+
+#define POPLAR_CRASH_UART_BASE		PL011_UART0_BASE
+#define POPLAR_CRASH_UART_CLK_IN_HZ	PL011_UART0_CLK_IN_HZ
+#define POPLAR_CONSOLE_BAUDRATE		PL011_BAUDRATE
+
+/* Generic platform constants */
+#define PLATFORM_STACK_SIZE		(0x800)
+
+#define FIRMWARE_WELCOME_STR		"Booting Trusted Firmware\n"
+#define BOOT_EMMC_NAME			"l-loader.bin"
+
+#define PLATFORM_CACHE_LINE_SIZE	(64)
+#define PLATFORM_CLUSTER_COUNT		U(1)
+#define PLATFORM_CORE_COUNT		U(4)
+#define PLATFORM_MAX_CPUS_PER_CLUSTER	U(4)
+
+/* IO framework user */
+#define MAX_IO_DEVICES			(4)
+#define MAX_IO_HANDLES			(4)
+#define MAX_IO_BLOCK_DEVICES		U(2)
+
+/* Memory size options */
+#define POPLAR_DRAM_SIZE_1G	0
+#define POPLAR_DRAM_SIZE_2G	1
+
+/* Memory map related constants */
+#define DDR_BASE			(0x00000000)
+
+#if (POPLAR_DRAM_SIZE_ID == POPLAR_DRAM_SIZE_2G)
+#define DDR_SIZE			(0x80000000)
+#elif (POPLAR_DRAM_SIZE_ID == POPLAR_DRAM_SIZE_1G)
+#define DDR_SIZE			(0x40000000)
+#else
+#error "Currently unsupported POPLAR_DRAM_SIZE_ID value"
+#endif
+
+#define DEVICE_BASE			(0xF0000000)
+#define DEVICE_SIZE			(0x0F000000)
+
+#define TEE_SEC_MEM_BASE		(0x70000000)
+#define TEE_SEC_MEM_SIZE		(0x10000000)
+
+/* Memory location options for TSP */
+#define POPLAR_SRAM_ID	0
+#define POPLAR_DRAM_ID	1
+
+/*
+ * DDR for OP-TEE (26MB from 0x02400000 -0x04000000) is divided in several
+ * regions:
+ *   - Secure DDR (default is the top 16MB) used by OP-TEE
+ *   - Non-secure DDR (4MB) reserved for OP-TEE's future use
+ *   - Secure DDR (4MB aligned on 4MB) for OP-TEE's "Secure Data Path" feature
+ *   - Non-secure DDR used by OP-TEE (shared memory and padding) (4MB)
+ */
+#define DDR_SEC_SIZE			0x01000000
+#define DDR_SEC_BASE			0x03000000
+
+/*
+ * BL3-2 specific defines.
+ */
+
+/*
+ * The TSP currently executes from TZC secured area of DRAM.
+ */
+#define BL32_DRAM_BASE			0x03000000
+#define BL32_DRAM_LIMIT			0x04000000
+
+#ifdef SPD_opteed
+/* Load pageable part of OP-TEE at end of allocated DRAM space for BL32 */
+#define POPLAR_OPTEE_PAGEABLE_LOAD_SIZE	0x400000 /* 4MB */
+#define POPLAR_OPTEE_PAGEABLE_LOAD_BASE	(BL32_DRAM_LIMIT - POPLAR_OPTEE_PAGEABLE_LOAD_SIZE) /* 0x03C0_0000 */
+#endif
+
+#if (POPLAR_TSP_RAM_LOCATION_ID == POPLAR_DRAM_ID)
+#define TSP_SEC_MEM_BASE		BL32_DRAM_BASE
+#define TSP_SEC_MEM_SIZE		(BL32_DRAM_LIMIT - BL32_DRAM_BASE)
+#define BL32_BASE			BL32_DRAM_BASE
+#define BL32_LIMIT			BL32_DRAM_LIMIT
+#elif (POPLAR_TSP_RAM_LOCATION_ID == POPLAR_SRAM_ID)
+#error "SRAM storage of TSP payload is currently unsupported"
+#else
+#error "Currently unsupported POPLAR_TSP_LOCATION_ID value"
+#endif
+
+/* BL32 is mandatory in AArch32 */
+#ifdef __aarch64__
+#ifdef SPD_none
+#undef BL32_BASE
+#endif /* SPD_none */
+#endif
+
+#define POPLAR_EMMC_DATA_BASE U(0x02200000)
+#define POPLAR_EMMC_DATA_SIZE EMMC_DESC_SIZE
+#define POPLAR_EMMC_DESC_BASE (POPLAR_EMMC_DATA_BASE + POPLAR_EMMC_DATA_SIZE)
+#define POPLAR_EMMC_DESC_SIZE EMMC_DESC_SIZE
+
+#define PLAT_POPLAR_NS_IMAGE_OFFSET	0x37000000
+
+/* Page table and MMU setup constants */
+#define PLAT_VIRT_ADDR_SPACE_SIZE   (1ULL << 32)
+#define PLAT_PHY_ADDR_SPACE_SIZE    (1ULL << 32)
+#define MAX_XLAT_TABLES			(4)
+#define MAX_MMAP_REGIONS		(16)
+
+#define CACHE_WRITEBACK_SHIFT		(6)
+#define CACHE_WRITEBACK_GRANULE		(1 << CACHE_WRITEBACK_SHIFT)
+
+/* Power states */
+#define PLAT_MAX_PWR_LVL		(MPIDR_AFFLVL1)
+#define PLAT_MAX_OFF_STATE		U(2)
+#define PLAT_MAX_RET_STATE		U(1)
+
+/* Interrupt controller */
+#define POPLAR_GICD_BASE	GICD_BASE
+#define POPLAR_GICC_BASE	GICC_BASE
+
+#define POPLAR_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(HISI_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_TIMER0, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_TIMER1, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_TIMER2, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_TIMER3, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(HISI_IRQ_SEC_AXI, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
+
+#define POPLAR_G0_IRQ_PROPS(grp)
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/hisilicon/poplar/include/poplar_layout.h b/plat/hisilicon/poplar/include/poplar_layout.h
new file mode 100644
index 0000000..03047f9
--- /dev/null
+++ b/plat/hisilicon/poplar/include/poplar_layout.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef POPLAR_LAYOUT_H
+#define POPLAR_LAYOUT_H
+
+/*
+ * Boot memory layout definitions for the HiSilicon Poplar board
+ */
+
+/*
+ * When Poplar is powered on, boot ROM verifies the initial content of
+ * boot media, loads it into low memory, and begins executing it
+ * in 32-bit mode.  The image loaded is "l-loader.bin", which contains
+ * a small amount code along with an embedded ARM Trusted Firmware
+ * BL1 image.  The main purpose of "l-loader" is to prepare the
+ * processor to execute the BL1 image in 64-bit mode, and to trigger
+ * that execution.
+ *
+ * Also embedded in "l-loader.bin" is a FIP image that contains
+ * other ARM Trusted Firmware images:  BL2; BL31; and for BL33,
+ * U-Boot.  When BL1 executes, it unpacks the BL2 image from the FIP
+ * image into a region of memory set aside to hold it.  Similarly,
+ * BL2 unpacks BL31 into memory reserved for it, and unpacks U-Boot
+ * into high memory.
+ *
+ * Because the BL1 code is embedded in "l-loader", its base address
+ * in memory is derived from the base address of the "l-loader"
+ * text section, together with an offset.  Memory space for BL2 is
+ * reserved immediately following BL1, and memory space is reserved
+ * for BL31 after that.  ARM Trusted Firmware requires each of these
+ * memory regions to be aligned on page boundaries, so the size of
+ * each region is a multiple of a page size (ending in 000).  Note
+ * that ARM Trusted Firmware requires the read-only and read-write
+ * regions of memory used for BL1 to be defined separately.
+ *
+ *    ---------------------
+ *    |  (unused memory)  |
+ *    +-------------------+	- - - - -
+ *    |  (l-loader text)  |               \
+ *    +-------------------+                \
+ *    |  BL1 (read-only)  | \               \
+ *    |- - - - - - - - - -| |               |
+ *    |  BL1 (read-write) | |               |
+ *    +-------------------+  >  BL Memory   |
+ *    |  Reserved for BL2 | |                > "l-loader.bin" image
+ *    +-------------------+ |               |
+ *    | Reserved for BL31 | /               |
+ *    +-------------------+                 |
+ *           . . .                          /
+ *    +-------------------+                /
+ *    |        FIP        |               /
+ *    +-------------------+	- - - - -
+ *           . . .
+ *    |  (unused memory)  |
+ *           . . .
+ *    +-------------------+
+ *    |Reserved for U-Boot|
+ *    +-------------------+
+ *           . . .
+ *    |  (unused memory)  |
+ *    ---------------------
+ *
+ * The size of each of these regions is defined below.  The base
+ * address of the "l-loader" TEXT section and the offset of the BL1
+ * image within that serve as anchors for defining the positions of
+ * all other regions.  The FIP is placed in a section of its own.
+ *
+ * A "BASE" is the memory address of the start of a region; a "LIMIT"
+ * marks its end.  A "SIZE" is the size of a region (in bytes).  An
+ * "OFFSET" is an offset to the start of a region relative to the
+ * base of the "l-loader" TEXT section (also a multiple of page size).
+ */
+#define LLOADER_TEXT_BASE		0x02001000	/* page aligned */
+#define BL1_OFFSET			0x0000D000	/* page multiple */
+#define FIP_BASE			0x02040000
+
+/*
+ * FIP_BASE_EMMC = 0x40000 - 0x1000
+ * = fip.bin offset - l-loader text offset
+ * in l-loader.bin
+ */
+#define FIP_BASE_EMMC			0x0003f000
+
+#define BL1_RO_SIZE			0x00008000	/* page multiple */
+#define BL1_RW_SIZE			0x00008000	/* page multiple */
+#define BL1_SIZE			(BL1_RO_SIZE + BL1_RW_SIZE)
+#define BL2_SIZE			0x0000d000	/* page multiple */
+#define BL31_SIZE			0x00014000
+#if !POPLAR_RECOVERY
+/*
+ * emmc partition1 4096KB
+ * - l-loader.bin 1984KB
+ * |- l-loader + bl1.bin 256KB
+ * |- fip.bin 1728KB (0x001b0000)
+ * - u-boot persistent data 64KB
+ * - uefi persistent data 2048KB
+ */
+#define FIP_SIZE			0x001b0000  /* absolute max */
+#else
+/*
+ * same as above, but bootrom can only load an image (l-loader.bin) of
+ * 1024KB max, so after deducting the size of l-loader + bl1.bin (256KB),
+ * that leaves 768KB (0x000c0000) for fip.bin
+ */
+#define FIP_SIZE			0x000c0000  /* absolute max */
+#endif
+
+     /* BL1_OFFSET */			/* (Defined above) */
+#define BL1_BASE			(LLOADER_TEXT_BASE + BL1_OFFSET)
+#define BL1_LIMIT			(BL1_BASE + BL1_SIZE)
+
+#define BL1_RO_OFFSET			(BL1_OFFSET)
+#define BL1_RO_BASE			(LLOADER_TEXT_BASE + BL1_RO_OFFSET)
+#define BL1_RO_LIMIT			(BL1_RO_BASE + BL1_RO_SIZE)
+
+#define BL1_RW_OFFSET			(BL1_RO_OFFSET + BL1_RO_SIZE)
+#define BL1_RW_BASE			(LLOADER_TEXT_BASE + BL1_RW_OFFSET)
+#define BL1_RW_LIMIT			(BL1_RW_BASE + BL1_RW_SIZE)
+
+#define BL2_OFFSET			(BL1_OFFSET + BL1_SIZE)
+#define BL2_BASE			(LLOADER_TEXT_BASE + BL2_OFFSET)
+#define BL2_LIMIT			(BL2_BASE + BL2_SIZE)
+
+#define BL31_OFFSET			(BL2_OFFSET + BL2_SIZE)
+#define BL31_BASE			(LLOADER_TEXT_BASE + BL31_OFFSET)
+#define BL31_LIMIT			(BL31_BASE + BL31_SIZE)
+
+#endif /* POPLAR_LAYOUT_H */