diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-28 09:13:47 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-28 09:13:47 +0000 |
commit | 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 (patch) | |
tree | bcf648efac40ca6139842707f0eba5a4496a6dd2 /plat/imx/common/include/sci/svc/pad | |
parent | Initial commit. (diff) | |
download | arm-trusted-firmware-upstream/2.8.0+dfsg.tar.xz arm-trusted-firmware-upstream/2.8.0+dfsg.zip |
Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'plat/imx/common/include/sci/svc/pad')
-rw-r--r-- | plat/imx/common/include/sci/svc/pad/sci_pad_api.h | 572 |
1 files changed, 572 insertions, 0 deletions
diff --git a/plat/imx/common/include/sci/svc/pad/sci_pad_api.h b/plat/imx/common/include/sci/svc/pad/sci_pad_api.h new file mode 100644 index 0000000..dc23eed --- /dev/null +++ b/plat/imx/common/include/sci/svc/pad/sci_pad_api.h @@ -0,0 +1,572 @@ +/* + * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*! + * Header file containing the public API for the System Controller (SC) + * Pad Control (PAD) function. + * + * @addtogroup PAD_SVC (SVC) Pad Service + * + * Module for the Pad Control (PAD) service. + * + * @details + * + * Pad configuration is managed by SC firmware. The pad configuration + * features supported by the SC firmware include: + * + * - Configuring the mux, input/output connection, and low-power isolation + mode. + * - Configuring the technology-specific pad setting such as drive strength, + * pullup/pulldown, etc. + * - Configuring compensation for pad groups with dual voltage capability. + * + * Pad functions fall into one of three categories. Generic functions are + * common to all SoCs and all process technologies. SoC functions are raw + * low-level functions. Technology-specific functions are specific to the + * process technology. + * + * The list of pads is SoC specific. Refer to the SoC [Pad List](@ref PADS) + * for valid pad values. Note that all pads exist on a die but may or + * may not be brought out by the specific package. Mapping of pads to + * package pins/balls is documented in the associated Data Sheet. Some pads + * may not be brought out because the part (die+package) is defeatured and + * some pads may connect to the substrate in the package. + * + * Some pads (SC_P_COMP_*) that can be specified are not individual pads + * but are in fact pad groups. These groups have additional configuration + * that can be done using the sc_pad_set_gp_28fdsoi_comp() function. More + * info on these can be found in the associated Reference Manual. + * + * Pads are managed as a resource by the Resource Manager (RM). They have + * assigned owners and only the owners can configure the pads. Some of the + * pads are reserved for use by the SCFW itself and this can be overriden + * with the implementation of board_config_sc(). Additionally, pads may + * be assigned to various other partitions via the implementation of + * board_system_config(). + * + * Note muxing two input pads to the same IP functional signal will + * result in undefined behavior. + * @{ + */ + +#ifndef SCI_PAD_API_H +#define SCI_PAD_API_H + +/* Includes */ + +#include <sci/sci_types.h> +#include <sci/svc/rm/sci_rm_api.h> + +/* Defines */ + +/*! + * @name Defines for type widths + */ +/*@{*/ +#define SC_PAD_MUX_W 3 /* Width of mux parameter */ +/*@}*/ + +/*! + * @name Defines for sc_pad_config_t + */ +/*@{*/ +#define SC_PAD_CONFIG_NORMAL 0U /* Normal */ +#define SC_PAD_CONFIG_OD 1U /* Open Drain */ +#define SC_PAD_CONFIG_OD_IN 2U /* Open Drain and input */ +#define SC_PAD_CONFIG_OUT_IN 3U /* Output and input */ +/*@}*/ + +/*! + * @name Defines for sc_pad_iso_t + */ +/*@{*/ +#define SC_PAD_ISO_OFF 0U /* ISO latch is transparent */ +#define SC_PAD_ISO_EARLY 1U /* Follow EARLY_ISO */ +#define SC_PAD_ISO_LATE 2U /* Follow LATE_ISO */ +#define SC_PAD_ISO_ON 3U /* ISO latched data is held */ +/*@}*/ + +/*! + * @name Defines for sc_pad_28fdsoi_dse_t + */ +/*@{*/ +#define SC_PAD_28FDSOI_DSE_18V_1MA 0U /* Drive strength of 1mA for 1.8v */ +#define SC_PAD_28FDSOI_DSE_18V_2MA 1U /* Drive strength of 2mA for 1.8v */ +#define SC_PAD_28FDSOI_DSE_18V_4MA 2U /* Drive strength of 4mA for 1.8v */ +#define SC_PAD_28FDSOI_DSE_18V_6MA 3U /* Drive strength of 6mA for 1.8v */ +#define SC_PAD_28FDSOI_DSE_18V_8MA 4U /* Drive strength of 8mA for 1.8v */ +#define SC_PAD_28FDSOI_DSE_18V_10MA 5U /* Drive strength of 10mA for 1.8v */ +#define SC_PAD_28FDSOI_DSE_18V_12MA 6U /* Drive strength of 12mA for 1.8v */ +#define SC_PAD_28FDSOI_DSE_18V_HS 7U /* High-speed drive strength for 1.8v */ +#define SC_PAD_28FDSOI_DSE_33V_2MA 0U /* Drive strength of 2mA for 3.3v */ +#define SC_PAD_28FDSOI_DSE_33V_4MA 1U /* Drive strength of 4mA for 3.3v */ +#define SC_PAD_28FDSOI_DSE_33V_8MA 2U /* Drive strength of 8mA for 3.3v */ +#define SC_PAD_28FDSOI_DSE_33V_12MA 3U /* Drive strength of 12mA for 3.3v */ +#define SC_PAD_28FDSOI_DSE_DV_HIGH 0U /* High drive strength for dual volt */ +#define SC_PAD_28FDSOI_DSE_DV_LOW 1U /* Low drive strength for dual volt */ +/*@}*/ + +/*! + * @name Defines for sc_pad_28fdsoi_ps_t + */ +/*@{*/ +#define SC_PAD_28FDSOI_PS_KEEPER 0U /* Bus-keeper (only valid for 1.8v) */ +#define SC_PAD_28FDSOI_PS_PU 1U /* Pull-up */ +#define SC_PAD_28FDSOI_PS_PD 2U /* Pull-down */ +#define SC_PAD_28FDSOI_PS_NONE 3U /* No pull (disabled) */ +/*@}*/ + +/*! + * @name Defines for sc_pad_28fdsoi_pus_t + */ +/*@{*/ +#define SC_PAD_28FDSOI_PUS_30K_PD 0U /* 30K pull-down */ +#define SC_PAD_28FDSOI_PUS_100K_PU 1U /* 100K pull-up */ +#define SC_PAD_28FDSOI_PUS_3K_PU 2U /* 3K pull-up */ +#define SC_PAD_28FDSOI_PUS_30K_PU 3U /* 30K pull-up */ +/*@}*/ + +/*! + * @name Defines for sc_pad_wakeup_t + */ +/*@{*/ +#define SC_PAD_WAKEUP_OFF 0U /* Off */ +#define SC_PAD_WAKEUP_CLEAR 1U /* Clears pending flag */ +#define SC_PAD_WAKEUP_LOW_LVL 4U /* Low level */ +#define SC_PAD_WAKEUP_FALL_EDGE 5U /* Falling edge */ +#define SC_PAD_WAKEUP_RISE_EDGE 6U /* Rising edge */ +#define SC_PAD_WAKEUP_HIGH_LVL 7U /* High-level */ +/*@}*/ + +/* Types */ + +/*! + * This type is used to declare a pad config. It determines how the + * output data is driven, pull-up is controlled, and input signal is + * connected. Normal and OD are typical and only connect the input + * when the output is not driven. The IN options are less common and + * force an input connection even when driving the output. + */ +typedef uint8_t sc_pad_config_t; + +/*! + * This type is used to declare a pad low-power isolation config. + * ISO_LATE is the most common setting. ISO_EARLY is only used when + * an output pad is directly determined by another input pad. The + * other two are only used when SW wants to directly contol isolation. + */ +typedef uint8_t sc_pad_iso_t; + +/*! + * This type is used to declare a drive strength. Note it is specific + * to 28FDSOI. Also note that valid values depend on the pad type. + */ +typedef uint8_t sc_pad_28fdsoi_dse_t; + +/*! + * This type is used to declare a pull select. Note it is specific + * to 28FDSOI. + */ +typedef uint8_t sc_pad_28fdsoi_ps_t; + +/*! + * This type is used to declare a pull-up select. Note it is specific + * to 28FDSOI HSIC pads. + */ +typedef uint8_t sc_pad_28fdsoi_pus_t; + +/*! + * This type is used to declare a wakeup mode of a pad. + */ +typedef uint8_t sc_pad_wakeup_t; + +/* Functions */ + +/*! + * @name Generic Functions + * @{ + */ + +/*! + * This function configures the mux settings for a pad. This includes + * the signal mux, pad config, and low-power isolation mode. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to configure + * @param[in] mux mux setting + * @param[in] config pad config + * @param[in] iso low-power isolation mode + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner + * + * Note muxing two input pads to the same IP functional signal will + * result in undefined behavior. + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_set_mux(sc_ipc_t ipc, sc_pad_t pad, + uint8_t mux, sc_pad_config_t config, sc_pad_iso_t iso); + +/*! + * This function gets the mux settings for a pad. This includes + * the signal mux, pad config, and low-power isolation mode. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to query + * @param[out] mux pointer to return mux setting + * @param[out] config pointer to return pad config + * @param[out] iso pointer to return low-power isolation mode + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_get_mux(sc_ipc_t ipc, sc_pad_t pad, + uint8_t *mux, sc_pad_config_t *config, + sc_pad_iso_t *iso); + +/*! + * This function configures the general purpose pad control. This + * is technology dependent and includes things like drive strength, + * slew rate, pull up/down, etc. Refer to the SoC Reference Manual + * for bit field details. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to configure + * @param[in] ctrl control value to set + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_set_gp(sc_ipc_t ipc, sc_pad_t pad, uint32_t ctrl); + +/*! + * This function gets the general purpose pad control. This + * is technology dependent and includes things like drive strength, + * slew rate, pull up/down, etc. Refer to the SoC Reference Manual + * for bit field details. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to query + * @param[out] ctrl pointer to return control value + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_get_gp(sc_ipc_t ipc, sc_pad_t pad, uint32_t *ctrl); + +/*! + * This function configures the wakeup mode of the pad. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to configure + * @param[in] wakeup wakeup to set + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_set_wakeup(sc_ipc_t ipc, sc_pad_t pad, sc_pad_wakeup_t wakeup); + +/*! + * This function gets the wakeup mode of a pad. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to query + * @param[out] wakeup pointer to return wakeup + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_get_wakeup(sc_ipc_t ipc, sc_pad_t pad, sc_pad_wakeup_t *wakeup); + +/*! + * This function configures a pad. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to configure + * @param[in] mux mux setting + * @param[in] config pad config + * @param[in] iso low-power isolation mode + * @param[in] ctrl control value + * @param[in] wakeup wakeup to set + * + * @see sc_pad_set_mux(). + * @see sc_pad_set_gp(). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Note muxing two input pads to the same IP functional signal will + * result in undefined behavior. + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_set_all(sc_ipc_t ipc, sc_pad_t pad, uint8_t mux, + sc_pad_config_t config, sc_pad_iso_t iso, uint32_t ctrl, + sc_pad_wakeup_t wakeup); + +/*! + * This function gets a pad's config. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to query + * @param[out] mux pointer to return mux setting + * @param[out] config pointer to return pad config + * @param[out] iso pointer to return low-power isolation mode + * @param[out] ctrl pointer to return control value + * @param[out] wakeup pointer to return wakeup to set + * + * @see sc_pad_set_mux(). + * @see sc_pad_set_gp(). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_get_all(sc_ipc_t ipc, sc_pad_t pad, uint8_t *mux, + sc_pad_config_t *config, sc_pad_iso_t *iso, + uint32_t *ctrl, sc_pad_wakeup_t *wakeup); + +/* @} */ + +/*! + * @name SoC Specific Functions + * @{ + */ + +/*! + * This function configures the settings for a pad. This setting is SoC + * specific. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to configure + * @param[in] val value to set + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, uint32_t val); + +/*! + * This function gets the settings for a pad. This setting is SoC + * specific. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to query + * @param[out] val pointer to return setting + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_get(sc_ipc_t ipc, sc_pad_t pad, uint32_t *val); + +/* @} */ + +/*! + * @name Technology Specific Functions + * @{ + */ + +/*! + * This function configures the pad control specific to 28FDSOI. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to configure + * @param[in] dse drive strength + * @param[in] ps pull select + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner, + * - SC_ERR_UNAVAILABLE if process not applicable + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_set_gp_28fdsoi(sc_ipc_t ipc, sc_pad_t pad, + sc_pad_28fdsoi_dse_t dse, + sc_pad_28fdsoi_ps_t ps); + +/*! + * This function gets the pad control specific to 28FDSOI. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to query + * @param[out] dse pointer to return drive strength + * @param[out] ps pointer to return pull select + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner, + * - SC_ERR_UNAVAILABLE if process not applicable + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_get_gp_28fdsoi(sc_ipc_t ipc, sc_pad_t pad, + sc_pad_28fdsoi_dse_t *dse, + sc_pad_28fdsoi_ps_t *ps); + +/*! + * This function configures the pad control specific to 28FDSOI. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to configure + * @param[in] dse drive strength + * @param[in] hys hysteresis + * @param[in] pus pull-up select + * @param[in] pke pull keeper enable + * @param[in] pue pull-up enable + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner, + * - SC_ERR_UNAVAILABLE if process not applicable + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_set_gp_28fdsoi_hsic(sc_ipc_t ipc, sc_pad_t pad, + sc_pad_28fdsoi_dse_t dse, sc_bool_t hys, + sc_pad_28fdsoi_pus_t pus, sc_bool_t pke, + sc_bool_t pue); + +/*! + * This function gets the pad control specific to 28FDSOI. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to query + * @param[out] dse pointer to return drive strength + * @param[out] hys pointer to return hysteresis + * @param[out] pus pointer to return pull-up select + * @param[out] pke pointer to return pull keeper enable + * @param[out] pue pointer to return pull-up enable + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner, + * - SC_ERR_UNAVAILABLE if process not applicable + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_get_gp_28fdsoi_hsic(sc_ipc_t ipc, sc_pad_t pad, + sc_pad_28fdsoi_dse_t *dse, sc_bool_t *hys, + sc_pad_28fdsoi_pus_t *pus, sc_bool_t *pke, + sc_bool_t *pue); + +/*! + * This function configures the compensation control specific to 28FDSOI. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to configure + * @param[in] compen compensation/freeze mode + * @param[in] fastfrz fast freeze + * @param[in] rasrcp compensation code for PMOS + * @param[in] rasrcn compensation code for NMOS + * @param[in] nasrc_sel NASRC read select + * @param[in] psw_ovr 2.5v override + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner, + * - SC_ERR_UNAVAILABLE if process not applicable + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + * + * Note \a psw_ovr is only applicable to pads supporting 2.5 volt + * operation (e.g. some Ethernet pads). + */ +sc_err_t sc_pad_set_gp_28fdsoi_comp(sc_ipc_t ipc, sc_pad_t pad, + uint8_t compen, sc_bool_t fastfrz, + uint8_t rasrcp, uint8_t rasrcn, + sc_bool_t nasrc_sel, sc_bool_t psw_ovr); + +/*! + * This function gets the compensation control specific to 28FDSOI. + * + * @param[in] ipc IPC handle + * @param[in] pad pad to query + * @param[out] compen pointer to return compensation/freeze mode + * @param[out] fastfrz pointer to return fast freeze + * @param[out] rasrcp pointer to return compensation code for PMOS + * @param[out] rasrcn pointer to return compensation code for NMOS + * @param[out] nasrc_sel pointer to return NASRC read select + * @param[out] compok pointer to return compensation status + * @param[out] nasrc pointer to return NASRCP/NASRCN + * @param[out] psw_ovr pointer to return the 2.5v override + * + * @return Returns an error code (SC_ERR_NONE = success). + * + * Return errors: + * - SC_PARM if arguments out of range or invalid, + * - SC_ERR_NOACCESS if caller's partition is not the pad owner, + * - SC_ERR_UNAVAILABLE if process not applicable + * + * Refer to the SoC [Pad List](@ref PADS) for valid pad values. + */ +sc_err_t sc_pad_get_gp_28fdsoi_comp(sc_ipc_t ipc, sc_pad_t pad, + uint8_t *compen, sc_bool_t *fastfrz, + uint8_t *rasrcp, uint8_t *rasrcn, + sc_bool_t *nasrc_sel, sc_bool_t *compok, + uint8_t *nasrc, sc_bool_t *psw_ovr); + +/* @} */ + +#endif /* SCI_PAD_API_H */ + +/**@}*/ |