Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 189 insertions, 0 deletions

diff --git a/plat/intel/soc/agilex/bl2_plat_setup.c b/plat/intel/soc/agilex/bl2_plat_setup.c
new file mode 100644
index 0000000..211a7b7
--- /dev/null
+++ b/plat/intel/soc/agilex/bl2_plat_setup.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright (c) 2019-2022, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2019-2022, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <drivers/generic_delay_timer.h>
+#include <drivers/synopsys/dw_mmc.h>
+#include <drivers/ti/uart/uart_16550.h>
+#include <lib/xlat_tables/xlat_tables.h>
+
+#include "agilex_mmc.h"
+#include "agilex_clock_manager.h"
+#include "agilex_memory_controller.h"
+#include "agilex_pinmux.h"
+#include "ccu/ncore_ccu.h"
+#include "qspi/cadence_qspi.h"
+#include "socfpga_emac.h"
+#include "socfpga_f2sdram_manager.h"
+#include "socfpga_handoff.h"
+#include "socfpga_mailbox.h"
+#include "socfpga_private.h"
+#include "socfpga_reset_manager.h"
+#include "socfpga_system_manager.h"
+#include "wdt/watchdog.h"
+
+static struct mmc_device_info mmc_info;
+
+const mmap_region_t agilex_plat_mmap[] = {
+	MAP_REGION_FLAT(DRAM_BASE, DRAM_SIZE,
+		MT_MEMORY | MT_RW | MT_NS),
+	MAP_REGION_FLAT(DEVICE1_BASE, DEVICE1_SIZE,
+		MT_DEVICE | MT_RW | MT_NS),
+	MAP_REGION_FLAT(DEVICE2_BASE, DEVICE2_SIZE,
+		MT_DEVICE | MT_RW | MT_SECURE),
+	MAP_REGION_FLAT(OCRAM_BASE, OCRAM_SIZE,
+		MT_NON_CACHEABLE | MT_RW | MT_SECURE),
+	MAP_REGION_FLAT(DEVICE3_BASE, DEVICE3_SIZE,
+		MT_DEVICE | MT_RW | MT_SECURE),
+	MAP_REGION_FLAT(MEM64_BASE, MEM64_SIZE,
+		MT_DEVICE | MT_RW | MT_NS),
+	MAP_REGION_FLAT(DEVICE4_BASE, DEVICE4_SIZE,
+		MT_DEVICE | MT_RW | MT_NS),
+	{0},
+};
+
+boot_source_type boot_source = BOOT_SOURCE;
+
+void bl2_el3_early_platform_setup(u_register_t x0, u_register_t x1,
+				u_register_t x2, u_register_t x4)
+{
+	static console_t console;
+	handoff reverse_handoff_ptr;
+
+	generic_delay_timer_init();
+
+	if (socfpga_get_handoff(&reverse_handoff_ptr))
+		return;
+	config_pinmux(&reverse_handoff_ptr);
+	config_clkmgr_handoff(&reverse_handoff_ptr);
+
+	enable_nonsecure_access();
+	deassert_peripheral_reset();
+	config_hps_hs_before_warm_reset();
+
+	watchdog_init(get_wdt_clk());
+
+	console_16550_register(PLAT_INTEL_UART_BASE, get_uart_clk(),
+		PLAT_BAUDRATE, &console);
+
+	socfpga_delay_timer_init();
+	init_ncore_ccu();
+	socfpga_emac_init();
+	init_hard_memory_controller();
+	mailbox_init();
+	agx_mmc_init();
+
+	if (!intel_mailbox_is_fpga_not_ready()) {
+		socfpga_bridges_enable(SOC2FPGA_MASK | LWHPS2FPGA_MASK |
+					FPGA2SOC_MASK);
+	}
+}
+
+
+void bl2_el3_plat_arch_setup(void)
+{
+
+	const mmap_region_t bl_regions[] = {
+		MAP_REGION_FLAT(BL2_BASE, BL2_END - BL2_BASE,
+			MT_MEMORY | MT_RW | MT_SECURE),
+		MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE,
+			MT_CODE | MT_SECURE),
+		MAP_REGION_FLAT(BL_RO_DATA_BASE,
+			BL_RO_DATA_END - BL_RO_DATA_BASE,
+			MT_RO_DATA | MT_SECURE),
+#if USE_COHERENT_MEM_BAR
+		MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
+			BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
+			MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+		{0},
+	};
+
+	setup_page_tables(bl_regions, agilex_plat_mmap);
+
+	enable_mmu_el3(0);
+
+	dw_mmc_params_t params = EMMC_INIT_PARAMS(0x100000, get_mmc_clk());
+
+	mmc_info.mmc_dev_type = MMC_IS_SD;
+	mmc_info.ocr_voltage = OCR_3_3_3_4 | OCR_3_2_3_3;
+
+	/* Request ownership and direct access to QSPI */
+	mailbox_hps_qspi_enable();
+
+	switch (boot_source) {
+	case BOOT_SOURCE_SDMMC:
+		dw_mmc_init(&params, &mmc_info);
+		socfpga_io_setup(boot_source);
+		break;
+
+	case BOOT_SOURCE_QSPI:
+		cad_qspi_init(0, QSPI_CONFIG_CPHA, QSPI_CONFIG_CPOL,
+			QSPI_CONFIG_CSDA, QSPI_CONFIG_CSDADS,
+			QSPI_CONFIG_CSEOT, QSPI_CONFIG_CSSOT, 0);
+		socfpga_io_setup(boot_source);
+		break;
+
+	default:
+		ERROR("Unsupported boot source\n");
+		panic();
+		break;
+	}
+}
+
+uint32_t get_spsr_for_bl33_entry(void)
+{
+	unsigned long el_status;
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+	el_status &= ID_AA64PFR0_ELX_MASK;
+
+	mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+
+	assert(bl_mem_params);
+
+	switch (image_id) {
+	case BL33_IMAGE_ID:
+		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+		bl_mem_params->ep_info.spsr = get_spsr_for_bl33_entry();
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/*******************************************************************************
+ * Perform any BL3-1 platform setup code
+ ******************************************************************************/
+void bl2_platform_setup(void)
+{
+}
+