Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 277 insertions, 0 deletions

diff --git a/plat/marvell/armada/a8k/common/aarch64/a8k_common.c b/plat/marvell/armada/a8k/common/aarch64/a8k_common.c
new file mode 100644
index 0000000..4332a76
--- /dev/null
+++ b/plat/marvell/armada/a8k/common/aarch64/a8k_common.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <plat_marvell.h>
+
+
+/* MMU entry for internal (register) space access */
+#define MAP_DEVICE0	MAP_REGION_FLAT(DEVICE0_BASE,			\
+					DEVICE0_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+/*
+ * Table of regions for various BL stages to map using the MMU.
+ */
+#if IMAGE_BL1
+const mmap_region_t plat_marvell_mmap[] = {
+	MARVELL_MAP_SECURE_RAM,
+	MAP_DEVICE0,
+	{0}
+};
+#endif
+#if IMAGE_BL2
+const mmap_region_t plat_marvell_mmap[] = {
+	MARVELL_MAP_SECURE_RAM,
+	MAP_DEVICE0,
+	MARVELL_MAP_DRAM,
+#ifdef SPD_opteed
+	MARVELL_MAP_OPTEE_CORE_MEM,
+	MARVELL_OPTEE_PAGEABLE_LOAD_MEM,
+#endif
+	{0}
+};
+#endif
+
+#if IMAGE_BL2U
+const mmap_region_t plat_marvell_mmap[] = {
+	MARVELL_MAP_SECURE_RAM,
+	MAP_DEVICE0,
+	{0}
+};
+#endif
+
+#if IMAGE_BLE
+const mmap_region_t plat_marvell_mmap[] = {
+	MAP_DEVICE0,
+	{0}
+};
+#endif
+
+#if IMAGE_BL31
+const mmap_region_t plat_marvell_mmap[] = {
+	MARVELL_MAP_SECURE_RAM,
+	MAP_DEVICE0,
+	MARVELL_MAP_DRAM,
+	{0}
+};
+#endif
+#if IMAGE_BL32
+const mmap_region_t plat_marvell_mmap[] = {
+	MARVELL_MAP_SECURE_RAM,
+	MAP_DEVICE0,
+	{0}
+};
+#endif
+
+MARVELL_CASSERT_MMAP;
diff --git a/plat/marvell/armada/a8k/common/aarch64/plat_arch_config.c b/plat/marvell/armada/a8k/common/aarch64/plat_arch_config.c
new file mode 100644
index 0000000..d576514
--- /dev/null
+++ b/plat/marvell/armada/a8k/common/aarch64/plat_arch_config.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/marvell/cache_llc.h>
+#include <lib/mmio.h>
+#include <plat/common/platform.h>
+
+#define CCU_HTC_ASET			(MVEBU_CCU_BASE(MVEBU_AP0) + 0x264)
+#define MVEBU_IO_AFFINITY		(0xF00)
+#define MVEBU_SF_REG			(MVEBU_REGS_BASE + 0x40)
+#define MVEBU_SF_EN			BIT(8)
+#define MVEBU_DFX_REG(cluster_id)	(MVEBU_REGS_BASE + 0x6F82A0 + \
+					(cluster_id) * 0x4)
+#define MVEBU_DFX_CLK_EN_POS		0x3
+#define MVEBU_DFX_CL0_CLK_OFFS		16
+#define MVEBU_DFX_CL0_CLK_MASK		(0xF << MVEBU_DFX_CL0_CLK_OFFS)
+#define MVEBU_DFX_CL1_CLK_OFFS		8
+#define MVEBU_DFX_CL1_CLK_MASK		(0xF << MVEBU_DFX_CL1_CLK_OFFS)
+
+#ifdef MVEBU_SOC_AP807
+static void plat_enable_snoop_filter(void)
+{
+	int cpu_id = plat_my_core_pos();
+
+	/* Snoop filter needs to be enabled once per cluster */
+	if (cpu_id % 2)
+		return;
+
+	mmio_setbits_32(MVEBU_SF_REG, MVEBU_SF_EN);
+}
+#endif
+
+#ifndef MVEBU_SOC_AP807
+static void plat_config_dfx_clock(void)
+{
+	int cluster_id = plat_my_core_pos();
+	uint32_t val;
+
+	/* DFX clock needs to be configured once per cluster */
+	if ((cluster_id % PLAT_MAX_CPUS_PER_CLUSTER) != 0) {
+		return;
+	}
+
+	val = mmio_read_32(MVEBU_DFX_REG(cluster_id / PLAT_MAX_CPUS_PER_CLUSTER));
+	if (cluster_id == 0) {
+		val &= ~MVEBU_DFX_CL0_CLK_MASK;
+		val |= (MVEBU_DFX_CLK_EN_POS << MVEBU_DFX_CL0_CLK_OFFS);
+	} else {
+		val &= ~MVEBU_DFX_CL1_CLK_MASK;
+		val |= (MVEBU_DFX_CLK_EN_POS << MVEBU_DFX_CL1_CLK_OFFS);
+	}
+	mmio_write_32(MVEBU_DFX_REG(cluster_id / PLAT_MAX_CPUS_PER_CLUSTER), val);
+}
+#endif
+
+static void plat_enable_affinity(void)
+{
+	int cluster_id;
+	int affinity;
+
+	/* set CPU Affinity */
+	cluster_id = plat_my_core_pos() / PLAT_MARVELL_CLUSTER_CORE_COUNT;
+	affinity = (MVEBU_IO_AFFINITY | (1 << cluster_id));
+	mmio_write_32(CCU_HTC_ASET, affinity);
+
+	/* set barier */
+	isb();
+}
+
+void marvell_psci_arch_init(int die_index)
+{
+#if LLC_ENABLE
+	/* check if LLC is in exclusive mode
+	 * as L2 is configured to UniqueClean eviction
+	 * (in a8k reset handler)
+	 */
+	if (llc_is_exclusive(0) == 0)
+		ERROR("LLC should be configured to exclusice mode\n");
+#endif
+
+	/* Enable Affinity */
+	plat_enable_affinity();
+
+#ifdef MVEBU_SOC_AP807
+	plat_enable_snoop_filter();
+#else
+	plat_config_dfx_clock();
+#endif
+}
diff --git a/plat/marvell/armada/a8k/common/aarch64/plat_helpers.S b/plat/marvell/armada/a8k/common/aarch64/plat_helpers.S
new file mode 100644
index 0000000..fadc4c2
--- /dev/null
+++ b/plat/marvell/armada/a8k/common/aarch64/plat_helpers.S
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <asm_macros.S>
+#include <platform_def.h>
+#include <marvell_pm.h>
+
+	.globl	plat_secondary_cold_boot_setup
+	.globl	plat_get_my_entrypoint
+	.globl	plat_is_my_cpu_primary
+	.globl  plat_reset_handler
+
+	/* -----------------------------------------------------
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * This function performs any platform specific actions
+	 * needed for a secondary cpu after a cold reset. Right
+	 * now this is a stub function.
+	 * -----------------------------------------------------
+	 */
+func plat_secondary_cold_boot_setup
+	mov	x0, #0
+	ret
+endfunc plat_secondary_cold_boot_setup
+
+	/* ---------------------------------------------------------------------
+	 * unsigned long plat_get_my_entrypoint (void);
+	 *
+	 * Main job of this routine is to distinguish
+	 * between a cold and warm boot
+	 * For a cold boot, return 0.
+	 * For a warm boot, read the mailbox and return the address it contains.
+	 *
+	 * ---------------------------------------------------------------------
+	 */
+func plat_get_my_entrypoint
+	/* Read first word and compare it with magic num */
+	mov_imm x0, PLAT_MARVELL_MAILBOX_BASE
+	ldr     x1, [x0]
+	mov_imm x2, MVEBU_MAILBOX_MAGIC_NUM
+	cmp     x1, x2
+	beq     warm_boot  /* If compare failed, return 0, i.e. cold boot */
+	mov     x0, #0
+	ret
+warm_boot:
+	mov_imm x1, MBOX_IDX_SEC_ADDR		/* Get the jump address */
+	subs	x1, x1, #1
+	mov	x2, #(MBOX_IDX_SEC_ADDR * 8)
+	lsl	x3, x2, x1
+	add     x0, x0, x3
+	ldr     x0, [x0]
+	ret
+endfunc plat_get_my_entrypoint
+
+	/* -----------------------------------------------------
+	 * unsigned int plat_is_my_cpu_primary (void);
+	 *
+	 * Find out whether the current cpu is the primary
+	 * cpu.
+	 * -----------------------------------------------------
+	 */
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	and	x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+	cmp	x0, #MVEBU_PRIMARY_CPU
+	cset	w0, eq
+	ret
+endfunc plat_is_my_cpu_primary
+
+        /* -----------------------------------------------------
+	 * void plat_reset_handler (void);
+         *
+	 * Platform specific configuration right after cpu is
+	 * is our of reset.
+	 *
+         * The plat_reset_handler can clobber x0 - x18, x30.
+         * -----------------------------------------------------
+         */
+func plat_reset_handler
+	/*
+	 * Note: the configurations below  should be done before MMU,
+	 *	  I Cache and L2are enabled.
+	 *	  The reset handler is executed right after reset
+	 * 	  and before Caches are enabled.
+	 */
+
+	/* Enable L1/L2 ECC and Parity */
+	mrs x5, s3_1_c11_c0_2  /* L2 Ctrl */
+	orr x5, x5, #(1 << 21) /* Enable L1/L2 cache ECC & Parity */
+	msr s3_1_c11_c0_2, x5  /* L2 Ctrl */
+
+#if LLC_ENABLE
+	/*
+	 * Enable L2 UniqueClean evictions
+	 *  Note: this configuration assumes that LLC is configured
+	 *	  in exclusive mode.
+	 *	  Later on in the code this assumption will be validated
+	 */
+	mrs x5, s3_1_c15_c0_0  /* L2 Ctrl */
+	orr x5, x5, #(1 << 14) /* Enable UniqueClean evictions with data */
+	msr s3_1_c15_c0_0, x5  /* L2 Ctrl */
+#endif
+
+	/* Instruction Barrier to allow msr command completion */
+	isb
+
+        ret
+endfunc plat_reset_handler