Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 413 insertions, 0 deletions

diff --git a/plat/mediatek/drivers/uart/8250_console.S b/plat/mediatek/drivers/uart/8250_console.S
new file mode 100644
index 0000000..66f998d
--- /dev/null
+++ b/plat/mediatek/drivers/uart/8250_console.S
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <asm_macros.S>
+#include <uart8250.h>
+
+	.globl	console_core_init
+	.globl	console_core_putc
+	.globl	console_core_getc
+	.globl	console_core_flush
+
+	/* -----------------------------------------------
+	 * int console_core_init(unsigned long base_addr,
+	 * unsigned int uart_clk, unsigned int baud_rate)
+	 * Function to initialize the console without a
+	 * C Runtime to print debug information. This
+	 * function will be accessed by console_init and
+	 * crash reporting.
+	 * In: x0 - console base address
+	 *     w1 - Uart clock in Hz
+	 *     w2 - Baud rate
+	 * Out: return 1 on success else 0 on error
+	 * Clobber list : x1, x2, x3
+	 * -----------------------------------------------
+	 */
+func console_core_init
+	/* Check the input base address */
+	cbz	x0, core_init_fail
+	/* Check baud rate and uart clock for sanity */
+	cbz	w1, core_init_fail
+	cbz	w2, core_init_fail
+
+	/* Disable interrupt */
+	str	wzr, [x0, #UART_IER]
+
+	/* Force DTR and RTS to high */
+	mov	w3, #(UART_MCR_DTR | UART_MCR_RTS)
+	str	w3, [x0, #UART_MCR]
+
+	/* Check high speed */
+	movz	w3, #:abs_g1:115200
+	movk	w3, #:abs_g0_nc:115200
+	cmp	w2, w3
+	b.hi	1f
+
+	/* Non high speed */
+	lsl	w2, w2, #4
+	mov	w3, wzr
+	b	2f
+
+	/* High speed */
+1:	lsl	w2, w2, #2
+	mov	w3, #2
+
+	/* Set high speed UART register */
+2:	str	w3, [x0, #UART_HIGHSPEED]
+
+	/* Calculate divisor */
+	udiv	w3, w1, w2	/* divisor = uartclk / (quot * baudrate) */
+	msub	w1, w3, w2, w1	/* remainder = uartclk % (quot * baudrate) */
+	lsr	w2, w2, #1
+	cmp	w1, w2
+	cinc	w3, w3, hs
+
+	/* Set line configuration, access divisor latches */
+	mov	w1, #(UART_LCR_DLAB | UART_LCR_WLS_8)
+	str	w1, [x0, #UART_LCR]
+
+	/* Set the divisor */
+	and	w1, w3, #0xff
+	str	w1, [x0, #UART_DLL]
+	lsr	w1, w3, #8
+	and	w1, w1, #0xff
+	str	w1, [x0, #UART_DLH]
+
+	/* Hide the divisor latches */
+	mov	w1, #UART_LCR_WLS_8
+	str	w1, [x0, #UART_LCR]
+
+	/* Enable FIFOs, and clear receive and transmit */
+	mov	w1, #(UART_FCR_FIFO_EN | UART_FCR_CLEAR_RCVR |	\
+			UART_FCR_CLEAR_XMIT)
+	str	w1, [x0, #UART_FCR]
+
+	mov	w0, #1
+	ret
+core_init_fail:
+	mov	w0, wzr
+	ret
+endfunc console_core_init
+
+	/* --------------------------------------------------------
+	 * int console_core_putc(int c, unsigned long base_addr)
+	 * Function to output a character over the console. It
+	 * returns the character printed on success or -1 on error.
+	 * In : w0 - character to be printed
+	 *      x1 - console base address
+	 * Out : return -1 on error else return character.
+	 * Clobber list : x2
+	 * --------------------------------------------------------
+	 */
+func console_core_putc
+	/* Check the input parameter */
+	cbz	x1, putc_error
+	/* Prepend '\r' to '\n' */
+	cmp	w0, #0xA
+	b.ne	2f
+
+	/* Check if the transmit FIFO is full */
+1:	ldr	w2, [x1, #UART_LSR]
+	and	w2, w2, #UART_LSR_THRE
+	cbz	w2, 1b
+	mov	w2, #0xD
+	str	w2, [x1, #UART_THR]
+
+	/* Check if the transmit FIFO is full */
+2:	ldr	w2, [x1, #UART_LSR]
+	and	w2, w2, #UART_LSR_THRE
+	cbz	w2, 2b
+	str	w0, [x1, #UART_THR]
+	ret
+putc_error:
+	mov	w0, #-1
+	ret
+endfunc console_core_putc
+
+	/* ---------------------------------------------
+	 * int console_core_getc(unsigned long base_addr)
+	 * Function to get a character from the console.
+	 * It returns the character grabbed on success
+	 * or -1 on error.
+	 * In : x0 - console base address
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_core_getc
+	cbz	x0, getc_error
+
+	/* Check if the receive FIFO is empty */
+1:	ldr	w1, [x0, #UART_LSR]
+	tbz	w1, #UART_LSR_DR, 1b
+	ldr	w0, [x0, #UART_RBR]
+	ret
+getc_error:
+	mov	w0, #-1
+	ret
+endfunc console_core_getc
+
+	/* ---------------------------------------------
+	 * void console_core_flush(uintptr_t base_addr)
+	 * Function to force a write of all buffered
+	 * data that hasn't been output.
+	 * In : x0 - console base address
+	 * Out : void.
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_core_flush
+	/* Placeholder */
+	ret
+endfunc console_core_flush
diff --git a/plat/mediatek/drivers/uart/uart.c b/plat/mediatek/drivers/uart/uart.c
new file mode 100644
index 0000000..fdaa793
--- /dev/null
+++ b/plat/mediatek/drivers/uart/uart.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <lib/mmio.h>
+#include <uart.h>
+
+static struct mt_uart uart_save_addr[DRV_SUPPORT_UART_PORTS];
+
+static const uint32_t uart_base_addr[DRV_SUPPORT_UART_PORTS] = {
+	UART0_BASE,
+	UART1_BASE
+};
+
+void mt_uart_restore(void)
+{
+	int uart_idx = UART_PORT0;
+	struct mt_uart *uart;
+	unsigned long base;
+
+	/* Must NOT print any debug log before UART restore */
+	for (uart_idx = UART_PORT0; uart_idx < HW_SUPPORT_UART_PORTS;
+	     uart_idx++) {
+
+		uart = &uart_save_addr[uart_idx];
+		base = uart->base;
+
+		mmio_write_32(UART_LCR(base), UART_LCR_MODE_B);
+		mmio_write_32(UART_EFR(base), uart->registers.efr);
+		mmio_write_32(UART_LCR(base), uart->registers.lcr);
+		mmio_write_32(UART_FCR(base), uart->registers.fcr);
+
+		/* baudrate */
+		mmio_write_32(UART_HIGHSPEED(base), uart->registers.highspeed);
+		mmio_write_32(UART_FRACDIV_L(base), uart->registers.fracdiv_l);
+		mmio_write_32(UART_FRACDIV_M(base), uart->registers.fracdiv_m);
+		mmio_write_32(UART_LCR(base),
+			      uart->registers.lcr | UART_LCR_DLAB);
+		mmio_write_32(UART_DLL(base), uart->registers.dll);
+		mmio_write_32(UART_DLH(base), uart->registers.dlh);
+		mmio_write_32(UART_LCR(base), uart->registers.lcr);
+		mmio_write_32(UART_SAMPLE_COUNT(base),
+			      uart->registers.sample_count);
+		mmio_write_32(UART_SAMPLE_POINT(base),
+			      uart->registers.sample_point);
+		mmio_write_32(UART_GUARD(base), uart->registers.guard);
+
+		/* flow control */
+		mmio_write_32(UART_ESCAPE_EN(base), uart->registers.escape_en);
+		mmio_write_32(UART_MCR(base), uart->registers.mcr);
+		mmio_write_32(UART_IER(base), uart->registers.ier);
+		mmio_write_32(UART_SCR(base), uart->registers.scr);
+	}
+}
+
+void mt_uart_save(void)
+{
+	int uart_idx = UART_PORT0;
+	struct mt_uart *uart;
+	unsigned long base;
+
+	for (uart_idx = UART_PORT0; uart_idx < HW_SUPPORT_UART_PORTS;
+	     uart_idx++) {
+
+		uart_save_addr[uart_idx].base = uart_base_addr[uart_idx];
+		base = uart_base_addr[uart_idx];
+		uart = &uart_save_addr[uart_idx];
+		uart->registers.lcr = mmio_read_32(UART_LCR(base));
+
+		mmio_write_32(UART_LCR(base), UART_LCR_MODE_B);
+		uart->registers.efr = mmio_read_32(UART_EFR(base));
+		mmio_write_32(UART_LCR(base), uart->registers.lcr);
+		uart->registers.fcr = mmio_read_32(UART_FCR_RD(base));
+
+		/* baudrate */
+		uart->registers.highspeed = mmio_read_32(UART_HIGHSPEED(base));
+		uart->registers.fracdiv_l = mmio_read_32(UART_FRACDIV_L(base));
+		uart->registers.fracdiv_m = mmio_read_32(UART_FRACDIV_M(base));
+		mmio_write_32(UART_LCR(base),
+			      uart->registers.lcr | UART_LCR_DLAB);
+		uart->registers.dll = mmio_read_32(UART_DLL(base));
+		uart->registers.dlh = mmio_read_32(UART_DLH(base));
+		mmio_write_32(UART_LCR(base), uart->registers.lcr);
+		uart->registers.sample_count = mmio_read_32(
+						UART_SAMPLE_COUNT(base));
+		uart->registers.sample_point = mmio_read_32(
+						UART_SAMPLE_POINT(base));
+		uart->registers.guard = mmio_read_32(UART_GUARD(base));
+
+		/* flow control */
+		uart->registers.escape_en = mmio_read_32(UART_ESCAPE_EN(base));
+		uart->registers.mcr = mmio_read_32(UART_MCR(base));
+		uart->registers.ier = mmio_read_32(UART_IER(base));
+		uart->registers.scr = mmio_read_32(UART_SCR(base));
+	}
+}
+
+void mt_console_uart_cg(int on)
+{
+	if (on == 1) {
+		mmio_write_32(UART_CLOCK_GATE_CLR, UART0_CLOCK_GATE_BIT);
+	} else {
+		mmio_write_32(UART_CLOCK_GATE_SET, UART0_CLOCK_GATE_BIT);
+	}
+}
+
+uint32_t mt_console_uart_cg_status(void)
+{
+	return mmio_read_32(UART_CLOCK_GATE_STA) & UART0_CLOCK_GATE_BIT;
+}
diff --git a/plat/mediatek/drivers/uart/uart.h b/plat/mediatek/drivers/uart/uart.h
new file mode 100644
index 0000000..2ca74fa
--- /dev/null
+++ b/plat/mediatek/drivers/uart/uart.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef UART_H
+#define UART_H
+
+#include <platform_def.h>
+
+/* UART HW information */
+#define HW_SUPPORT_UART_PORTS	2
+#define DRV_SUPPORT_UART_PORTS	2
+
+/* console UART clock cg */
+#define UART_CLOCK_GATE_SET		(INFRACFG_AO_BASE + 0x80)
+#define UART_CLOCK_GATE_CLR		(INFRACFG_AO_BASE + 0x84)
+#define UART_CLOCK_GATE_STA		(INFRACFG_AO_BASE + 0x90)
+#define UART0_CLOCK_GATE_BIT		(1U<<22)
+#define UART1_CLOCK_GATE_BIT		(1U<<23)
+
+/* UART registers */
+#define UART_RBR(_baseaddr)			(_baseaddr + 0x0)
+#define UART_THR(_baseaddr)			(_baseaddr + 0x0)
+#define UART_IER(_baseaddr)			(_baseaddr + 0x4)
+#define UART_IIR(_baseaddr)			(_baseaddr + 0x8)
+#define UART_FCR(_baseaddr)			(_baseaddr + 0x8)
+#define UART_LCR(_baseaddr)			(_baseaddr + 0xc)
+#define UART_MCR(_baseaddr)			(_baseaddr + 0x10)
+#define UART_LSR(_baseaddr)			(_baseaddr + 0x14)
+#define UART_MSR(_baseaddr)			(_baseaddr + 0x18)
+#define UART_SCR(_baseaddr)			(_baseaddr + 0x1c)
+#define UART_DLL(_baseaddr)			(_baseaddr + 0x0)
+#define UART_DLH(_baseaddr)			(_baseaddr + 0x4)
+#define UART_EFR(_baseaddr)			(_baseaddr + 0x8)
+#define UART_XON1(_baseaddr)			(_baseaddr + 0x10)
+#define UART_XON2(_baseaddr)			(_baseaddr + 0x14)
+#define UART_XOFF1(_baseaddr)			(_baseaddr + 0x18)
+#define UART_XOFF2(_baseaddr)			(_baseaddr + 0x1c)
+#define UART_AUTOBAUD(_baseaddr)		(_baseaddr + 0x20)
+#define UART_HIGHSPEED(_baseaddr)		(_baseaddr + 0x24)
+#define UART_SAMPLE_COUNT(_baseaddr)		(_baseaddr + 0x28)
+#define UART_SAMPLE_POINT(_baseaddr)		(_baseaddr + 0x2c)
+#define UART_AUTOBAUD_REG(_baseaddr)		(_baseaddr + 0x30)
+#define UART_RATE_FIX_REG(_baseaddr)		(_baseaddr + 0x34)
+#define UART_AUTO_BAUDSAMPLE(_baseaddr)		(_baseaddr + 0x38)
+#define UART_GUARD(_baseaddr)			(_baseaddr + 0x3c)
+#define UART_ESCAPE_DAT(_baseaddr)		(_baseaddr + 0x40)
+#define UART_ESCAPE_EN(_baseaddr)		(_baseaddr + 0x44)
+#define UART_SLEEP_EN(_baseaddr)		(_baseaddr + 0x48)
+#define UART_DMA_EN(_baseaddr)			(_baseaddr + 0x4c)
+#define UART_RXTRI_AD(_baseaddr)		(_baseaddr + 0x50)
+#define UART_FRACDIV_L(_baseaddr)		(_baseaddr + 0x54)
+#define UART_FRACDIV_M(_baseaddr)		(_baseaddr + 0x58)
+#define UART_FCR_RD(_baseaddr)			(_baseaddr + 0x5C)
+#define UART_USB_RX_SEL(_baseaddr)		(_baseaddr + 0xB0)
+#define UART_SLEEP_REQ(_baseaddr)		(_baseaddr + 0xB4)
+#define UART_SLEEP_ACK(_baseaddr)		(_baseaddr + 0xB8)
+#define UART_SPM_SEL(_baseaddr)			(_baseaddr + 0xBC)
+#define UART_LCR_DLAB				0x0080
+#define UART_LCR_MODE_B				0x00bf
+
+enum uart_port_ID {
+	UART_PORT0 = 0,
+	UART_PORT1
+};
+
+struct mt_uart_register {
+	uint32_t dll;
+	uint32_t dlh;
+	uint32_t ier;
+	uint32_t lcr;
+	uint32_t mcr;
+	uint32_t fcr;
+	uint32_t lsr;
+	uint32_t scr;
+	uint32_t efr;
+	uint32_t highspeed;
+	uint32_t sample_count;
+	uint32_t sample_point;
+	uint32_t fracdiv_l;
+	uint32_t fracdiv_m;
+	uint32_t escape_en;
+	uint32_t guard;
+	uint32_t rx_sel;
+};
+
+struct mt_uart {
+	unsigned long base;
+	struct mt_uart_register registers;
+};
+
+/* external API */
+void mt_uart_save(void);
+void mt_uart_restore(void);
+void mt_console_uart_cg(int on);
+uint32_t mt_console_uart_cg_status(void);
+
+#endif /* __UART_H__ */
diff --git a/plat/mediatek/drivers/uart/uart8250.h b/plat/mediatek/drivers/uart/uart8250.h
new file mode 100644
index 0000000..f0541d6
--- /dev/null
+++ b/plat/mediatek/drivers/uart/uart8250.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef UART8250_H
+#define UART8250_H
+
+/* UART register */
+#define UART_RBR		0x00	/* Receive buffer register */
+#define UART_DLL		0x00	/* Divisor latch lsb */
+#define UART_THR		0x00	/* Transmit holding register */
+#define UART_DLH		0x04	/* Divisor latch msb */
+#define UART_IER		0x04	/* Interrupt enable register */
+#define UART_FCR		0x08	/* FIFO control register */
+#define UART_LCR		0x0c	/* Line control register */
+#define UART_MCR		0x10	/* Modem control register */
+#define UART_LSR		0x14	/* Line status register */
+#define UART_HIGHSPEED		0x24	/* High speed UART */
+
+/* FCR */
+#define UART_FCR_FIFO_EN	0x01	/* enable FIFO */
+#define UART_FCR_CLEAR_RCVR	0x02	/* clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04	/* clear the XMIT FIFO */
+
+/* LCR */
+#define UART_LCR_WLS_8		0x03	/* 8 bit character length */
+#define UART_LCR_DLAB		0x80	/* divisor latch access bit */
+
+/* MCR */
+#define UART_MCR_DTR		0x01
+#define UART_MCR_RTS		0x02
+
+/* LSR */
+#define UART_LSR_DR		0x01	/* Data ready */
+#define UART_LSR_THRE		0x20	/* Xmit holding register empty */
+
+#endif /* UART8250_H */