summaryrefslogtreecommitdiffstats
path: root/plat/socionext/synquacer/drivers
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-28 09:13:47 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-28 09:13:47 +0000
commit102b0d2daa97dae68d3eed54d8fe37a9cc38a892 (patch)
treebcf648efac40ca6139842707f0eba5a4496a6dd2 /plat/socionext/synquacer/drivers
parentInitial commit. (diff)
downloadarm-trusted-firmware-102b0d2daa97dae68d3eed54d8fe37a9cc38a892.tar.xz
arm-trusted-firmware-102b0d2daa97dae68d3eed54d8fe37a9cc38a892.zip
Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'plat/socionext/synquacer/drivers')
-rw-r--r--plat/socionext/synquacer/drivers/mhu/sq_mhu.c98
-rw-r--r--plat/socionext/synquacer/drivers/mhu/sq_mhu.h19
-rw-r--r--plat/socionext/synquacer/drivers/scp/sq_scmi.c244
-rw-r--r--plat/socionext/synquacer/drivers/scp/sq_scp.c21
-rw-r--r--plat/socionext/synquacer/drivers/scpi/sq_scpi.c219
-rw-r--r--plat/socionext/synquacer/drivers/scpi/sq_scpi.h83
6 files changed, 684 insertions, 0 deletions
diff --git a/plat/socionext/synquacer/drivers/mhu/sq_mhu.c b/plat/socionext/synquacer/drivers/mhu/sq_mhu.c
new file mode 100644
index 0000000..925ed97
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/mhu/sq_mhu.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <lib/bakery_lock.h>
+#include <lib/mmio.h>
+
+#include <sq_common.h>
+#include "sq_mhu.h"
+
+/* SCP MHU secure channel registers */
+#define SCP_INTR_S_STAT 0x200
+#define SCP_INTR_S_SET 0x208
+#define SCP_INTR_S_CLEAR 0x210
+
+/* CPU MHU secure channel registers */
+#define CPU_INTR_S_STAT 0x300
+#define CPU_INTR_S_SET 0x308
+#define CPU_INTR_S_CLEAR 0x310
+
+DEFINE_BAKERY_LOCK(sq_lock);
+
+/*
+ * Slot 31 is reserved because the MHU hardware uses this register bit to
+ * indicate a non-secure access attempt. The total number of available slots is
+ * therefore 31 [30:0].
+ */
+#define MHU_MAX_SLOT_ID 30
+
+void mhu_secure_message_start(unsigned int slot_id)
+{
+ assert(slot_id <= MHU_MAX_SLOT_ID);
+
+ bakery_lock_get(&sq_lock);
+
+ /* Make sure any previous command has finished */
+ while (mmio_read_32(PLAT_SQ_MHU_BASE + CPU_INTR_S_STAT) &
+ (1 << slot_id))
+ ;
+}
+
+void mhu_secure_message_send(unsigned int slot_id)
+{
+ assert(slot_id <= MHU_MAX_SLOT_ID);
+ assert(!(mmio_read_32(PLAT_SQ_MHU_BASE + CPU_INTR_S_STAT) &
+ (1 << slot_id)));
+
+ /* Send command to SCP */
+ mmio_write_32(PLAT_SQ_MHU_BASE + CPU_INTR_S_SET, 1 << slot_id);
+}
+
+uint32_t mhu_secure_message_wait(void)
+{
+ uint32_t response;
+
+ /* Wait for response from SCP */
+ while (!(response = mmio_read_32(PLAT_SQ_MHU_BASE + SCP_INTR_S_STAT)))
+ ;
+
+ return response;
+}
+
+void mhu_secure_message_end(unsigned int slot_id)
+{
+ assert(slot_id <= MHU_MAX_SLOT_ID);
+
+ /*
+ * Clear any response we got by writing one in the relevant slot bit to
+ * the CLEAR register
+ */
+ mmio_write_32(PLAT_SQ_MHU_BASE + SCP_INTR_S_CLEAR, 1 << slot_id);
+
+ bakery_lock_release(&sq_lock);
+}
+
+void mhu_secure_init(void)
+{
+ bakery_lock_init(&sq_lock);
+
+ /*
+ * The STAT register resets to zero. Ensure it is in the expected state,
+ * as a stale or garbage value would make us think it's a message we've
+ * already sent.
+ */
+ assert(mmio_read_32(PLAT_SQ_MHU_BASE + CPU_INTR_S_STAT) == 0);
+}
+
+void plat_sq_pwrc_setup(void)
+{
+ mhu_secure_init();
+}
diff --git a/plat/socionext/synquacer/drivers/mhu/sq_mhu.h b/plat/socionext/synquacer/drivers/mhu/sq_mhu.h
new file mode 100644
index 0000000..f6b5cc3
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/mhu/sq_mhu.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SQ_MHU_H
+#define SQ_MHU_H
+
+#include <stdint.h>
+
+void mhu_secure_message_start(unsigned int slot_id);
+void mhu_secure_message_send(unsigned int slot_id);
+uint32_t mhu_secure_message_wait(void);
+void mhu_secure_message_end(unsigned int slot_id);
+
+void mhu_secure_init(void);
+
+#endif /* SQ_MHU_H */
diff --git a/plat/socionext/synquacer/drivers/scp/sq_scmi.c b/plat/socionext/synquacer/drivers/scp/sq_scmi.c
new file mode 100644
index 0000000..0e99256
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/scp/sq_scmi.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/arm/css/css_mhu_doorbell.h>
+#include <drivers/arm/css/css_scp.h>
+#include <drivers/arm/css/scmi.h>
+#include <plat/arm/css/common/css_pm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+#include <scmi_sq.h>
+#include <sq_common.h>
+
+/*
+ * This file implements the SCP helper functions using SCMI protocol.
+ */
+
+DEFINE_BAKERY_LOCK(sq_scmi_lock);
+#define SQ_SCMI_LOCK_GET_INSTANCE (&sq_scmi_lock)
+
+#define SQ_SCMI_PAYLOAD_BASE PLAT_SQ_SCP_COM_SHARED_MEM_BASE
+#define MHU_CPU_INTR_S_SET_OFFSET 0x308
+
+const uint32_t sq_core_pos_to_scmi_dmn_id_map[PLATFORM_CORE_COUNT] = {
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
+ 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23
+};
+
+static scmi_channel_plat_info_t sq_scmi_plat_info = {
+ .scmi_mbx_mem = SQ_SCMI_PAYLOAD_BASE,
+ .db_reg_addr = PLAT_SQ_MHU_BASE + MHU_CPU_INTR_S_SET_OFFSET,
+ .db_preserve_mask = 0xfffffffe,
+ .db_modify_mask = 0x1,
+ .ring_doorbell = &mhu_ring_doorbell,
+};
+
+/*
+ * SCMI power state parameter bit field encoding for SynQuacer platform.
+ *
+ * 31 20 19 16 15 12 11 8 7 4 3 0
+ * +-------------------------------------------------------------+
+ * | SBZ | Max level | Level 3 | Level 2 | Level 1 | Level 0 |
+ * | | | state | state | state | state |
+ * +-------------------------------------------------------------+
+ *
+ * `Max level` encodes the highest level that has a valid power state
+ * encoded in the power state.
+ */
+#define SCMI_PWR_STATE_MAX_PWR_LVL_SHIFT 16
+#define SCMI_PWR_STATE_MAX_PWR_LVL_WIDTH 4
+#define SCMI_PWR_STATE_MAX_PWR_LVL_MASK \
+ ((1 << SCMI_PWR_STATE_MAX_PWR_LVL_WIDTH) - 1)
+#define SCMI_SET_PWR_STATE_MAX_PWR_LVL(_power_state, _max_level) \
+ (_power_state) |= ((_max_level) & SCMI_PWR_STATE_MAX_PWR_LVL_MASK)\
+ << SCMI_PWR_STATE_MAX_PWR_LVL_SHIFT
+#define SCMI_GET_PWR_STATE_MAX_PWR_LVL(_power_state) \
+ (((_power_state) >> SCMI_PWR_STATE_MAX_PWR_LVL_SHIFT) \
+ & SCMI_PWR_STATE_MAX_PWR_LVL_MASK)
+
+#define SCMI_PWR_STATE_LVL_WIDTH 4
+#define SCMI_PWR_STATE_LVL_MASK \
+ ((1 << SCMI_PWR_STATE_LVL_WIDTH) - 1)
+#define SCMI_SET_PWR_STATE_LVL(_power_state, _level, _level_state) \
+ (_power_state) |= ((_level_state) & SCMI_PWR_STATE_LVL_MASK) \
+ << (SCMI_PWR_STATE_LVL_WIDTH * (_level))
+#define SCMI_GET_PWR_STATE_LVL(_power_state, _level) \
+ (((_power_state) >> (SCMI_PWR_STATE_LVL_WIDTH * (_level))) & \
+ SCMI_PWR_STATE_LVL_MASK)
+
+/*
+ * The SCMI power state enumeration for a power domain level
+ */
+typedef enum {
+ scmi_power_state_off = 0,
+ scmi_power_state_on = 1,
+ scmi_power_state_sleep = 2,
+} scmi_power_state_t;
+
+/*
+ * The global handle for invoking the SCMI driver APIs after the driver
+ * has been initialized.
+ */
+static void *sq_scmi_handle;
+
+/* The SCMI channel global object */
+static scmi_channel_t channel;
+
+/*
+ * Helper function to turn off a CPU power domain and
+ * its parent power domains if applicable.
+ */
+void sq_scmi_off(const struct psci_power_state *target_state)
+{
+ int lvl = 0, ret;
+ uint32_t scmi_pwr_state = 0;
+
+ /* At-least the CPU level should be specified to be OFF */
+ assert(target_state->pwr_domain_state[SQ_PWR_LVL0] ==
+ SQ_LOCAL_STATE_OFF);
+
+ for (; lvl <= PLAT_MAX_PWR_LVL; lvl++) {
+ if (target_state->pwr_domain_state[lvl] == SQ_LOCAL_STATE_RUN)
+ break;
+
+ assert(target_state->pwr_domain_state[lvl] ==
+ SQ_LOCAL_STATE_OFF);
+ SCMI_SET_PWR_STATE_LVL(scmi_pwr_state, lvl,
+ scmi_power_state_off);
+ }
+
+ SCMI_SET_PWR_STATE_MAX_PWR_LVL(scmi_pwr_state, lvl - 1);
+
+ ret = scmi_pwr_state_set(sq_scmi_handle,
+ sq_core_pos_to_scmi_dmn_id_map[plat_my_core_pos()],
+ scmi_pwr_state);
+
+ if (ret != SCMI_E_QUEUED && ret != SCMI_E_SUCCESS) {
+ ERROR("SCMI set power state command return 0x%x unexpected\n",
+ ret);
+ panic();
+ }
+}
+
+/*
+ * Helper function to turn ON a CPU power domain and
+ *its parent power domains if applicable.
+ */
+void sq_scmi_on(u_register_t mpidr)
+{
+ int lvl = 0, ret, core_pos;
+ uint32_t scmi_pwr_state = 0;
+
+ for (; lvl <= PLAT_MAX_PWR_LVL; lvl++)
+ SCMI_SET_PWR_STATE_LVL(scmi_pwr_state, lvl,
+ scmi_power_state_on);
+
+ SCMI_SET_PWR_STATE_MAX_PWR_LVL(scmi_pwr_state, lvl - 1);
+
+ core_pos = plat_core_pos_by_mpidr(mpidr);
+ assert(core_pos >= 0 && core_pos < PLATFORM_CORE_COUNT);
+
+ ret = scmi_pwr_state_set(sq_scmi_handle,
+ sq_core_pos_to_scmi_dmn_id_map[core_pos],
+ scmi_pwr_state);
+
+ if (ret != SCMI_E_QUEUED && ret != SCMI_E_SUCCESS) {
+ ERROR("SCMI set power state command return 0x%x unexpected\n",
+ ret);
+ panic();
+ }
+}
+
+void __dead2 sq_scmi_system_off(int state)
+{
+ int ret;
+
+ /*
+ * Disable GIC CPU interface to prevent pending interrupt from waking
+ * up the AP from WFI.
+ */
+ sq_gic_cpuif_disable();
+
+ /*
+ * Issue SCMI command. First issue a graceful
+ * request and if that fails force the request.
+ */
+ ret = scmi_sys_pwr_state_set(sq_scmi_handle,
+ SCMI_SYS_PWR_FORCEFUL_REQ,
+ state);
+
+ if (ret != SCMI_E_SUCCESS) {
+ ERROR("SCMI system power state set 0x%x returns unexpected 0x%x\n",
+ state, ret);
+ panic();
+ }
+ wfi();
+ ERROR("SCMI set power state: operation not handled.\n");
+ panic();
+}
+
+/*
+ * Helper function to reset the system via SCMI.
+ */
+void __dead2 sq_scmi_sys_shutdown(void)
+{
+ sq_scmi_system_off(SCMI_SYS_PWR_SHUTDOWN);
+}
+
+void __dead2 sq_scmi_sys_reboot(void)
+{
+ sq_scmi_system_off(SCMI_SYS_PWR_COLD_RESET);
+}
+
+static int scmi_ap_core_init(scmi_channel_t *ch)
+{
+#if PROGRAMMABLE_RESET_ADDRESS
+ uint32_t version;
+ int ret;
+
+ ret = scmi_proto_version(ch, SCMI_AP_CORE_PROTO_ID, &version);
+ if (ret != SCMI_E_SUCCESS) {
+ WARN("SCMI AP core protocol version message failed\n");
+ return -1;
+ }
+
+ if (!is_scmi_version_compatible(SCMI_AP_CORE_PROTO_VER, version)) {
+ WARN("SCMI AP core protocol version 0x%x incompatible with driver version 0x%x\n",
+ version, SCMI_AP_CORE_PROTO_VER);
+ return -1;
+ }
+ INFO("SCMI AP core protocol version 0x%x detected\n", version);
+#endif
+ return 0;
+}
+
+void __init plat_sq_pwrc_setup(void)
+{
+ channel.info = &sq_scmi_plat_info;
+ channel.lock = SQ_SCMI_LOCK_GET_INSTANCE;
+ sq_scmi_handle = scmi_init(&channel);
+ if (sq_scmi_handle == NULL) {
+ ERROR("SCMI Initialization failed\n");
+ panic();
+ }
+ if (scmi_ap_core_init(&channel) < 0) {
+ ERROR("SCMI AP core protocol initialization failed\n");
+ panic();
+ }
+}
+
+uint32_t sq_scmi_get_draminfo(struct draminfo *info)
+{
+ scmi_get_draminfo(sq_scmi_handle, info);
+
+ return 0;
+}
diff --git a/plat/socionext/synquacer/drivers/scp/sq_scp.c b/plat/socionext/synquacer/drivers/scp/sq_scp.c
new file mode 100644
index 0000000..e494022
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/scp/sq_scp.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <sq_common.h>
+#include "sq_scpi.h"
+
+/*
+ * Helper function to get dram information from SCP.
+ */
+uint32_t sq_scp_get_draminfo(struct draminfo *info)
+{
+#if SQ_USE_SCMI_DRIVER
+ sq_scmi_get_draminfo(info);
+#else
+ scpi_get_draminfo(info);
+#endif
+ return 0;
+}
diff --git a/plat/socionext/synquacer/drivers/scpi/sq_scpi.c b/plat/socionext/synquacer/drivers/scpi/sq_scpi.c
new file mode 100644
index 0000000..0cb75a0
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/scpi/sq_scpi.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <sq_common.h>
+
+#include "sq_mhu.h"
+#include "sq_scpi.h"
+
+#define SCPI_SHARED_MEM_SCP_TO_AP PLAT_SQ_SCP_COM_SHARED_MEM_BASE
+#define SCPI_SHARED_MEM_AP_TO_SCP (PLAT_SQ_SCP_COM_SHARED_MEM_BASE \
+ + 0x100)
+
+#define SCPI_CMD_HEADER_AP_TO_SCP \
+ ((scpi_cmd_t *) SCPI_SHARED_MEM_AP_TO_SCP)
+#define SCPI_CMD_PAYLOAD_AP_TO_SCP \
+ ((void *) (SCPI_SHARED_MEM_AP_TO_SCP + sizeof(scpi_cmd_t)))
+
+/* ID of the MHU slot used for the SCPI protocol */
+#define SCPI_MHU_SLOT_ID 0
+
+static void scpi_secure_message_start(void)
+{
+ mhu_secure_message_start(SCPI_MHU_SLOT_ID);
+}
+
+static void scpi_secure_message_send(size_t payload_size)
+{
+ /*
+ * Ensure that any write to the SCPI payload area is seen by SCP before
+ * we write to the MHU register. If these 2 writes were reordered by
+ * the CPU then SCP would read stale payload data
+ */
+ dmbst();
+
+ mhu_secure_message_send(SCPI_MHU_SLOT_ID);
+}
+
+static void scpi_secure_message_receive(scpi_cmd_t *cmd)
+{
+ uint32_t mhu_status;
+
+ assert(cmd != NULL);
+
+ mhu_status = mhu_secure_message_wait();
+
+ /* Expect an SCPI message, reject any other protocol */
+ if (mhu_status != (1 << SCPI_MHU_SLOT_ID)) {
+ ERROR("MHU: Unexpected protocol (MHU status: 0x%x)\n",
+ mhu_status);
+ panic();
+ }
+
+ /*
+ * Ensure that any read to the SCPI payload area is done after reading
+ * the MHU register. If these 2 reads were reordered then the CPU would
+ * read invalid payload data
+ */
+ dmbld();
+
+ memcpy(cmd, (void *) SCPI_SHARED_MEM_SCP_TO_AP, sizeof(*cmd));
+}
+
+static void scpi_secure_message_end(void)
+{
+ mhu_secure_message_end(SCPI_MHU_SLOT_ID);
+}
+
+int scpi_wait_ready(void)
+{
+ scpi_cmd_t scpi_cmd;
+ scpi_status_t status = SCP_OK;
+
+ VERBOSE("Waiting for SCP_READY command...\n");
+
+ /* Get a message from the SCP */
+ scpi_secure_message_start();
+ scpi_secure_message_receive(&scpi_cmd);
+ scpi_secure_message_end();
+
+ /* We are expecting 'SCP Ready', produce correct error if it's not */
+ if (scpi_cmd.id != SCPI_CMD_SCP_READY) {
+ ERROR("Unexpected SCP command: expected command #%u,"
+ "got command #%u\n", SCPI_CMD_SCP_READY, scpi_cmd.id);
+ status = SCP_E_SUPPORT;
+ } else if (scpi_cmd.size != 0) {
+ ERROR("SCP_READY command has incorrect size: expected 0,"
+ "got %u\n", scpi_cmd.size);
+ status = SCP_E_SIZE;
+ }
+
+ VERBOSE("Sending response for SCP_READY command\n");
+
+ /*
+ * Send our response back to SCP.
+ * We are using the same SCPI header, just update the status field.
+ */
+ scpi_cmd.status = status;
+ scpi_secure_message_start();
+ memcpy((void *) SCPI_SHARED_MEM_AP_TO_SCP, &scpi_cmd, sizeof(scpi_cmd));
+ scpi_secure_message_send(0);
+ scpi_secure_message_end();
+
+ return status == SCP_OK ? 0 : -1;
+}
+
+void scpi_set_sq_power_state(unsigned int mpidr, scpi_power_state_t cpu_state,
+ scpi_power_state_t cluster_state, scpi_power_state_t sq_state)
+{
+ scpi_cmd_t *cmd;
+ uint32_t state = 0;
+ uint32_t *payload_addr;
+
+ state |= mpidr & 0x0f; /* CPU ID */
+ state |= (mpidr & 0xf00) >> 4; /* Cluster ID */
+ state |= cpu_state << 8;
+ state |= cluster_state << 12;
+ state |= sq_state << 16;
+
+ scpi_secure_message_start();
+
+ /* Populate the command header */
+ cmd = SCPI_CMD_HEADER_AP_TO_SCP;
+ cmd->id = SCPI_CMD_SET_POWER_STATE;
+ cmd->set = SCPI_SET_NORMAL;
+ cmd->sender = 0;
+ cmd->size = sizeof(state);
+ /* Populate the command payload */
+ payload_addr = SCPI_CMD_PAYLOAD_AP_TO_SCP;
+ *payload_addr = state;
+ scpi_secure_message_send(sizeof(state));
+
+ /*
+ * SCP does not reply to this command in order to avoid MHU interrupts
+ * from the sender, which could interfere with its power state request.
+ */
+ scpi_secure_message_end();
+}
+
+uint32_t scpi_sys_power_state(scpi_system_state_t system_state)
+{
+ scpi_cmd_t *cmd;
+ uint8_t *payload_addr;
+ scpi_cmd_t response;
+
+ scpi_secure_message_start();
+
+ /* Populate the command header */
+ cmd = SCPI_CMD_HEADER_AP_TO_SCP;
+ cmd->id = SCPI_CMD_SYS_POWER_STATE;
+ cmd->set = 0;
+ cmd->sender = 0;
+ cmd->size = sizeof(*payload_addr);
+ /* Populate the command payload */
+ payload_addr = SCPI_CMD_PAYLOAD_AP_TO_SCP;
+ *payload_addr = system_state & 0xff;
+ scpi_secure_message_send(sizeof(*payload_addr));
+
+ scpi_secure_message_receive(&response);
+
+ scpi_secure_message_end();
+
+ return response.status;
+}
+
+uint32_t scpi_get_draminfo(struct draminfo *info)
+{
+ scpi_cmd_t *cmd;
+ struct {
+ scpi_cmd_t cmd;
+ struct draminfo info;
+ } response;
+ uint32_t mhu_status;
+
+ scpi_secure_message_start();
+
+ /* Populate the command header */
+ cmd = SCPI_CMD_HEADER_AP_TO_SCP;
+ cmd->id = SCPI_CMD_GET_DRAMINFO;
+ cmd->set = SCPI_SET_EXTENDED;
+ cmd->sender = 0;
+ cmd->size = 0;
+
+ scpi_secure_message_send(0);
+
+ mhu_status = mhu_secure_message_wait();
+
+ /* Expect an SCPI message, reject any other protocol */
+ if (mhu_status != (1 << SCPI_MHU_SLOT_ID)) {
+ ERROR("MHU: Unexpected protocol (MHU status: 0x%x)\n",
+ mhu_status);
+ panic();
+ }
+
+ /*
+ * Ensure that any read to the SCPI payload area is done after reading
+ * the MHU register. If these 2 reads were reordered then the CPU would
+ * read invalid payload data
+ */
+ dmbld();
+
+ memcpy(&response, (void *)SCPI_SHARED_MEM_SCP_TO_AP, sizeof(response));
+
+ scpi_secure_message_end();
+
+ if (response.cmd.status == SCP_OK)
+ *info = response.info;
+
+ return response.cmd.status;
+}
diff --git a/plat/socionext/synquacer/drivers/scpi/sq_scpi.h b/plat/socionext/synquacer/drivers/scpi/sq_scpi.h
new file mode 100644
index 0000000..eb6ce5c
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/scpi/sq_scpi.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SQ_SCPI_H
+#define SQ_SCPI_H
+
+#include <stddef.h>
+#include <stdint.h>
+
+/*
+ * An SCPI command consists of a header and a payload.
+ * The following structure describes the header. It is 64-bit long.
+ */
+typedef struct {
+ /* Command ID */
+ uint32_t id : 7;
+ /* Set ID. Identifies whether this is a standard or extended command. */
+ uint32_t set : 1;
+ /* Sender ID to match a reply. The value is sender specific. */
+ uint32_t sender : 8;
+ /* Size of the payload in bytes (0 - 511) */
+ uint32_t size : 9;
+ uint32_t reserved : 7;
+ /*
+ * Status indicating the success of a command.
+ * See the enum below.
+ */
+ uint32_t status;
+} scpi_cmd_t;
+
+typedef enum {
+ SCPI_SET_NORMAL = 0, /* Normal SCPI commands */
+ SCPI_SET_EXTENDED /* Extended SCPI commands */
+} scpi_set_t;
+
+enum {
+ SCP_OK = 0, /* Success */
+ SCP_E_PARAM, /* Invalid parameter(s) */
+ SCP_E_ALIGN, /* Invalid alignment */
+ SCP_E_SIZE, /* Invalid size */
+ SCP_E_HANDLER, /* Invalid handler or callback */
+ SCP_E_ACCESS, /* Invalid access or permission denied */
+ SCP_E_RANGE, /* Value out of range */
+ SCP_E_TIMEOUT, /* Time out has ocurred */
+ SCP_E_NOMEM, /* Invalid memory area or pointer */
+ SCP_E_PWRSTATE, /* Invalid power state */
+ SCP_E_SUPPORT, /* Feature not supported or disabled */
+ SCPI_E_DEVICE, /* Device error */
+ SCPI_E_BUSY, /* Device is busy */
+};
+
+typedef uint32_t scpi_status_t;
+
+typedef enum {
+ SCPI_CMD_SCP_READY = 0x01,
+ SCPI_CMD_SET_POWER_STATE = 0x03,
+ SCPI_CMD_SYS_POWER_STATE = 0x05
+} scpi_command_t;
+
+typedef enum {
+ scpi_power_on = 0,
+ scpi_power_retention = 1,
+ scpi_power_off = 3,
+} scpi_power_state_t;
+
+typedef enum {
+ scpi_system_shutdown = 0,
+ scpi_system_reboot = 1,
+ scpi_system_reset = 2
+} scpi_system_state_t;
+
+extern int scpi_wait_ready(void);
+extern void scpi_set_sq_power_state(unsigned int mpidr,
+ scpi_power_state_t cpu_state,
+ scpi_power_state_t cluster_state,
+ scpi_power_state_t css_state);
+uint32_t scpi_sys_power_state(scpi_system_state_t system_state);
+uint32_t scpi_get_draminfo(struct draminfo *info);
+
+#endif /* SQ_SCPI_H */