Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

24 files changed, 2460 insertions, 0 deletions

diff --git a/plat/socionext/synquacer/drivers/mhu/sq_mhu.c b/plat/socionext/synquacer/drivers/mhu/sq_mhu.c
new file mode 100644
index 0000000..925ed97
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/mhu/sq_mhu.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <lib/bakery_lock.h>
+#include <lib/mmio.h>
+
+#include <sq_common.h>
+#include "sq_mhu.h"
+
+/* SCP MHU secure channel registers */
+#define SCP_INTR_S_STAT		0x200
+#define SCP_INTR_S_SET		0x208
+#define SCP_INTR_S_CLEAR	0x210
+
+/* CPU MHU secure channel registers */
+#define CPU_INTR_S_STAT		0x300
+#define CPU_INTR_S_SET		0x308
+#define CPU_INTR_S_CLEAR	0x310
+
+DEFINE_BAKERY_LOCK(sq_lock);
+
+/*
+ * Slot 31 is reserved because the MHU hardware uses this register bit to
+ * indicate a non-secure access attempt. The total number of available slots is
+ * therefore 31 [30:0].
+ */
+#define MHU_MAX_SLOT_ID		30
+
+void mhu_secure_message_start(unsigned int slot_id)
+{
+	assert(slot_id <= MHU_MAX_SLOT_ID);
+
+	bakery_lock_get(&sq_lock);
+
+	/* Make sure any previous command has finished */
+	while (mmio_read_32(PLAT_SQ_MHU_BASE + CPU_INTR_S_STAT) &
+							(1 << slot_id))
+		;
+}
+
+void mhu_secure_message_send(unsigned int slot_id)
+{
+	assert(slot_id <= MHU_MAX_SLOT_ID);
+	assert(!(mmio_read_32(PLAT_SQ_MHU_BASE + CPU_INTR_S_STAT) &
+							(1 << slot_id)));
+
+	/* Send command to SCP */
+	mmio_write_32(PLAT_SQ_MHU_BASE + CPU_INTR_S_SET, 1 << slot_id);
+}
+
+uint32_t mhu_secure_message_wait(void)
+{
+	uint32_t response;
+
+	/* Wait for response from SCP */
+	while (!(response = mmio_read_32(PLAT_SQ_MHU_BASE + SCP_INTR_S_STAT)))
+		;
+
+	return response;
+}
+
+void mhu_secure_message_end(unsigned int slot_id)
+{
+	assert(slot_id <= MHU_MAX_SLOT_ID);
+
+	/*
+	 * Clear any response we got by writing one in the relevant slot bit to
+	 * the CLEAR register
+	 */
+	mmio_write_32(PLAT_SQ_MHU_BASE + SCP_INTR_S_CLEAR, 1 << slot_id);
+
+	bakery_lock_release(&sq_lock);
+}
+
+void mhu_secure_init(void)
+{
+	bakery_lock_init(&sq_lock);
+
+	/*
+	 * The STAT register resets to zero. Ensure it is in the expected state,
+	 * as a stale or garbage value would make us think it's a message we've
+	 * already sent.
+	 */
+	assert(mmio_read_32(PLAT_SQ_MHU_BASE + CPU_INTR_S_STAT) == 0);
+}
+
+void plat_sq_pwrc_setup(void)
+{
+	mhu_secure_init();
+}
diff --git a/plat/socionext/synquacer/drivers/mhu/sq_mhu.h b/plat/socionext/synquacer/drivers/mhu/sq_mhu.h
new file mode 100644
index 0000000..f6b5cc3
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/mhu/sq_mhu.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SQ_MHU_H
+#define SQ_MHU_H
+
+#include <stdint.h>
+
+void mhu_secure_message_start(unsigned int slot_id);
+void mhu_secure_message_send(unsigned int slot_id);
+uint32_t mhu_secure_message_wait(void);
+void mhu_secure_message_end(unsigned int slot_id);
+
+void mhu_secure_init(void);
+
+#endif /* SQ_MHU_H */
diff --git a/plat/socionext/synquacer/drivers/scp/sq_scmi.c b/plat/socionext/synquacer/drivers/scp/sq_scmi.c
new file mode 100644
index 0000000..0e99256
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/scp/sq_scmi.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/arm/css/css_mhu_doorbell.h>
+#include <drivers/arm/css/css_scp.h>
+#include <drivers/arm/css/scmi.h>
+#include <plat/arm/css/common/css_pm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+#include <scmi_sq.h>
+#include <sq_common.h>
+
+/*
+ * This file implements the SCP helper functions using SCMI protocol.
+ */
+
+DEFINE_BAKERY_LOCK(sq_scmi_lock);
+#define SQ_SCMI_LOCK_GET_INSTANCE	(&sq_scmi_lock)
+
+#define SQ_SCMI_PAYLOAD_BASE		PLAT_SQ_SCP_COM_SHARED_MEM_BASE
+#define MHU_CPU_INTR_S_SET_OFFSET	0x308
+
+const uint32_t sq_core_pos_to_scmi_dmn_id_map[PLATFORM_CORE_COUNT] = {
+	0,   1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11,
+	12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23
+};
+
+static scmi_channel_plat_info_t sq_scmi_plat_info = {
+		.scmi_mbx_mem = SQ_SCMI_PAYLOAD_BASE,
+		.db_reg_addr = PLAT_SQ_MHU_BASE + MHU_CPU_INTR_S_SET_OFFSET,
+		.db_preserve_mask = 0xfffffffe,
+		.db_modify_mask = 0x1,
+		.ring_doorbell = &mhu_ring_doorbell,
+};
+
+/*
+ * SCMI power state parameter bit field encoding for SynQuacer platform.
+ *
+ * 31  20 19       16 15      12 11       8 7        4 3         0
+ * +-------------------------------------------------------------+
+ * | SBZ | Max level |  Level 3 |  Level 2 |  Level 1 |  Level 0 |
+ * |     |           |   state  |   state  |   state  |   state  |
+ * +-------------------------------------------------------------+
+ *
+ * `Max level` encodes the highest level that has a valid power state
+ * encoded in the power state.
+ */
+#define SCMI_PWR_STATE_MAX_PWR_LVL_SHIFT	16
+#define SCMI_PWR_STATE_MAX_PWR_LVL_WIDTH	4
+#define SCMI_PWR_STATE_MAX_PWR_LVL_MASK		\
+				((1 << SCMI_PWR_STATE_MAX_PWR_LVL_WIDTH) - 1)
+#define SCMI_SET_PWR_STATE_MAX_PWR_LVL(_power_state, _max_level)		\
+		(_power_state) |= ((_max_level) & SCMI_PWR_STATE_MAX_PWR_LVL_MASK)\
+				<< SCMI_PWR_STATE_MAX_PWR_LVL_SHIFT
+#define SCMI_GET_PWR_STATE_MAX_PWR_LVL(_power_state)		\
+		(((_power_state) >> SCMI_PWR_STATE_MAX_PWR_LVL_SHIFT)	\
+				& SCMI_PWR_STATE_MAX_PWR_LVL_MASK)
+
+#define SCMI_PWR_STATE_LVL_WIDTH		4
+#define SCMI_PWR_STATE_LVL_MASK			\
+				((1 << SCMI_PWR_STATE_LVL_WIDTH) - 1)
+#define SCMI_SET_PWR_STATE_LVL(_power_state, _level, _level_state)		\
+		(_power_state) |= ((_level_state) & SCMI_PWR_STATE_LVL_MASK)	\
+				<< (SCMI_PWR_STATE_LVL_WIDTH * (_level))
+#define SCMI_GET_PWR_STATE_LVL(_power_state, _level)		\
+		(((_power_state) >> (SCMI_PWR_STATE_LVL_WIDTH * (_level))) &	\
+				SCMI_PWR_STATE_LVL_MASK)
+
+/*
+ * The SCMI power state enumeration for a power domain level
+ */
+typedef enum {
+	scmi_power_state_off = 0,
+	scmi_power_state_on = 1,
+	scmi_power_state_sleep = 2,
+} scmi_power_state_t;
+
+/*
+ * The global handle for invoking the SCMI driver APIs after the driver
+ * has been initialized.
+ */
+static void *sq_scmi_handle;
+
+/* The SCMI channel global object */
+static scmi_channel_t channel;
+
+/*
+ * Helper function to turn off a CPU power domain and
+ * its parent power domains if applicable.
+ */
+void sq_scmi_off(const struct psci_power_state *target_state)
+{
+	int lvl = 0, ret;
+	uint32_t scmi_pwr_state = 0;
+
+	/* At-least the CPU level should be specified to be OFF */
+	assert(target_state->pwr_domain_state[SQ_PWR_LVL0] ==
+							SQ_LOCAL_STATE_OFF);
+
+	for (; lvl <= PLAT_MAX_PWR_LVL; lvl++) {
+		if (target_state->pwr_domain_state[lvl] == SQ_LOCAL_STATE_RUN)
+			break;
+
+		assert(target_state->pwr_domain_state[lvl] ==
+							SQ_LOCAL_STATE_OFF);
+		SCMI_SET_PWR_STATE_LVL(scmi_pwr_state, lvl,
+				scmi_power_state_off);
+	}
+
+	SCMI_SET_PWR_STATE_MAX_PWR_LVL(scmi_pwr_state, lvl - 1);
+
+	ret = scmi_pwr_state_set(sq_scmi_handle,
+		sq_core_pos_to_scmi_dmn_id_map[plat_my_core_pos()],
+		scmi_pwr_state);
+
+	if (ret != SCMI_E_QUEUED && ret != SCMI_E_SUCCESS) {
+		ERROR("SCMI set power state command return 0x%x unexpected\n",
+				ret);
+		panic();
+	}
+}
+
+/*
+ * Helper function to turn ON a CPU power domain and
+ *its parent power domains if applicable.
+ */
+void sq_scmi_on(u_register_t mpidr)
+{
+	int lvl = 0, ret, core_pos;
+	uint32_t scmi_pwr_state = 0;
+
+	for (; lvl <= PLAT_MAX_PWR_LVL; lvl++)
+		SCMI_SET_PWR_STATE_LVL(scmi_pwr_state, lvl,
+				scmi_power_state_on);
+
+	SCMI_SET_PWR_STATE_MAX_PWR_LVL(scmi_pwr_state, lvl - 1);
+
+	core_pos = plat_core_pos_by_mpidr(mpidr);
+	assert(core_pos >= 0 && core_pos < PLATFORM_CORE_COUNT);
+
+	ret = scmi_pwr_state_set(sq_scmi_handle,
+		sq_core_pos_to_scmi_dmn_id_map[core_pos],
+		scmi_pwr_state);
+
+	if (ret != SCMI_E_QUEUED && ret != SCMI_E_SUCCESS) {
+		ERROR("SCMI set power state command return 0x%x unexpected\n",
+				ret);
+		panic();
+	}
+}
+
+void __dead2 sq_scmi_system_off(int state)
+{
+	int ret;
+
+	/*
+	 * Disable GIC CPU interface to prevent pending interrupt from waking
+	 * up the AP from WFI.
+	 */
+	sq_gic_cpuif_disable();
+
+	/*
+	 * Issue SCMI command. First issue a graceful
+	 * request and if that fails force the request.
+	 */
+	ret = scmi_sys_pwr_state_set(sq_scmi_handle,
+			SCMI_SYS_PWR_FORCEFUL_REQ,
+			state);
+
+	if (ret != SCMI_E_SUCCESS) {
+		ERROR("SCMI system power state set 0x%x returns unexpected 0x%x\n",
+			state, ret);
+		panic();
+	}
+	wfi();
+	ERROR("SCMI set power state: operation not handled.\n");
+	panic();
+}
+
+/*
+ * Helper function to reset the system via SCMI.
+ */
+void __dead2 sq_scmi_sys_shutdown(void)
+{
+	sq_scmi_system_off(SCMI_SYS_PWR_SHUTDOWN);
+}
+
+void __dead2 sq_scmi_sys_reboot(void)
+{
+	sq_scmi_system_off(SCMI_SYS_PWR_COLD_RESET);
+}
+
+static int scmi_ap_core_init(scmi_channel_t *ch)
+{
+#if PROGRAMMABLE_RESET_ADDRESS
+	uint32_t version;
+	int ret;
+
+	ret = scmi_proto_version(ch, SCMI_AP_CORE_PROTO_ID, &version);
+	if (ret != SCMI_E_SUCCESS) {
+		WARN("SCMI AP core protocol version message failed\n");
+		return -1;
+	}
+
+	if (!is_scmi_version_compatible(SCMI_AP_CORE_PROTO_VER, version)) {
+		WARN("SCMI AP core protocol version 0x%x incompatible with driver version 0x%x\n",
+						version, SCMI_AP_CORE_PROTO_VER);
+		return -1;
+	}
+	INFO("SCMI AP core protocol version 0x%x detected\n", version);
+#endif
+	return 0;
+}
+
+void __init plat_sq_pwrc_setup(void)
+{
+	channel.info = &sq_scmi_plat_info;
+	channel.lock = SQ_SCMI_LOCK_GET_INSTANCE;
+	sq_scmi_handle = scmi_init(&channel);
+	if (sq_scmi_handle == NULL) {
+		ERROR("SCMI Initialization failed\n");
+		panic();
+	}
+	if (scmi_ap_core_init(&channel) < 0) {
+		ERROR("SCMI AP core protocol initialization failed\n");
+		panic();
+	}
+}
+
+uint32_t sq_scmi_get_draminfo(struct draminfo *info)
+{
+	scmi_get_draminfo(sq_scmi_handle, info);
+
+	return 0;
+}
diff --git a/plat/socionext/synquacer/drivers/scp/sq_scp.c b/plat/socionext/synquacer/drivers/scp/sq_scp.c
new file mode 100644
index 0000000..e494022
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/scp/sq_scp.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <sq_common.h>
+#include "sq_scpi.h"
+
+/*
+ * Helper function to get dram information from SCP.
+ */
+uint32_t sq_scp_get_draminfo(struct draminfo *info)
+{
+#if SQ_USE_SCMI_DRIVER
+	sq_scmi_get_draminfo(info);
+#else
+	scpi_get_draminfo(info);
+#endif
+	return 0;
+}
diff --git a/plat/socionext/synquacer/drivers/scpi/sq_scpi.c b/plat/socionext/synquacer/drivers/scpi/sq_scpi.c
new file mode 100644
index 0000000..0cb75a0
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/scpi/sq_scpi.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <sq_common.h>
+
+#include "sq_mhu.h"
+#include "sq_scpi.h"
+
+#define SCPI_SHARED_MEM_SCP_TO_AP	PLAT_SQ_SCP_COM_SHARED_MEM_BASE
+#define SCPI_SHARED_MEM_AP_TO_SCP	(PLAT_SQ_SCP_COM_SHARED_MEM_BASE \
+								 + 0x100)
+
+#define SCPI_CMD_HEADER_AP_TO_SCP		\
+	((scpi_cmd_t *) SCPI_SHARED_MEM_AP_TO_SCP)
+#define SCPI_CMD_PAYLOAD_AP_TO_SCP		\
+	((void *) (SCPI_SHARED_MEM_AP_TO_SCP + sizeof(scpi_cmd_t)))
+
+/* ID of the MHU slot used for the SCPI protocol */
+#define SCPI_MHU_SLOT_ID		0
+
+static void scpi_secure_message_start(void)
+{
+	mhu_secure_message_start(SCPI_MHU_SLOT_ID);
+}
+
+static void scpi_secure_message_send(size_t payload_size)
+{
+	/*
+	 * Ensure that any write to the SCPI payload area is seen by SCP before
+	 * we write to the MHU register. If these 2 writes were reordered by
+	 * the CPU then SCP would read stale payload data
+	 */
+	dmbst();
+
+	mhu_secure_message_send(SCPI_MHU_SLOT_ID);
+}
+
+static void scpi_secure_message_receive(scpi_cmd_t *cmd)
+{
+	uint32_t mhu_status;
+
+	assert(cmd != NULL);
+
+	mhu_status = mhu_secure_message_wait();
+
+	/* Expect an SCPI message, reject any other protocol */
+	if (mhu_status != (1 << SCPI_MHU_SLOT_ID)) {
+		ERROR("MHU: Unexpected protocol (MHU status: 0x%x)\n",
+			mhu_status);
+		panic();
+	}
+
+	/*
+	 * Ensure that any read to the SCPI payload area is done after reading
+	 * the MHU register. If these 2 reads were reordered then the CPU would
+	 * read invalid payload data
+	 */
+	dmbld();
+
+	memcpy(cmd, (void *) SCPI_SHARED_MEM_SCP_TO_AP, sizeof(*cmd));
+}
+
+static void scpi_secure_message_end(void)
+{
+	mhu_secure_message_end(SCPI_MHU_SLOT_ID);
+}
+
+int scpi_wait_ready(void)
+{
+	scpi_cmd_t scpi_cmd;
+	scpi_status_t status = SCP_OK;
+
+	VERBOSE("Waiting for SCP_READY command...\n");
+
+	/* Get a message from the SCP */
+	scpi_secure_message_start();
+	scpi_secure_message_receive(&scpi_cmd);
+	scpi_secure_message_end();
+
+	/* We are expecting 'SCP Ready', produce correct error if it's not */
+	if (scpi_cmd.id != SCPI_CMD_SCP_READY) {
+		ERROR("Unexpected SCP command: expected command #%u,"
+		      "got command #%u\n", SCPI_CMD_SCP_READY, scpi_cmd.id);
+		status = SCP_E_SUPPORT;
+	} else if (scpi_cmd.size != 0) {
+		ERROR("SCP_READY command has incorrect size: expected 0,"
+		      "got %u\n", scpi_cmd.size);
+		status = SCP_E_SIZE;
+	}
+
+	VERBOSE("Sending response for SCP_READY command\n");
+
+	/*
+	 * Send our response back to SCP.
+	 * We are using the same SCPI header, just update the status field.
+	 */
+	scpi_cmd.status = status;
+	scpi_secure_message_start();
+	memcpy((void *) SCPI_SHARED_MEM_AP_TO_SCP, &scpi_cmd, sizeof(scpi_cmd));
+	scpi_secure_message_send(0);
+	scpi_secure_message_end();
+
+	return status == SCP_OK ? 0 : -1;
+}
+
+void scpi_set_sq_power_state(unsigned int mpidr, scpi_power_state_t cpu_state,
+		scpi_power_state_t cluster_state, scpi_power_state_t sq_state)
+{
+	scpi_cmd_t *cmd;
+	uint32_t state = 0;
+	uint32_t *payload_addr;
+
+	state |= mpidr & 0x0f;	/* CPU ID */
+	state |= (mpidr & 0xf00) >> 4;	/* Cluster ID */
+	state |= cpu_state << 8;
+	state |= cluster_state << 12;
+	state |= sq_state << 16;
+
+	scpi_secure_message_start();
+
+	/* Populate the command header */
+	cmd = SCPI_CMD_HEADER_AP_TO_SCP;
+	cmd->id = SCPI_CMD_SET_POWER_STATE;
+	cmd->set = SCPI_SET_NORMAL;
+	cmd->sender = 0;
+	cmd->size = sizeof(state);
+	/* Populate the command payload */
+	payload_addr = SCPI_CMD_PAYLOAD_AP_TO_SCP;
+	*payload_addr = state;
+	scpi_secure_message_send(sizeof(state));
+
+	/*
+	 * SCP does not reply to this command in order to avoid MHU interrupts
+	 * from the sender, which could interfere with its power state request.
+	 */
+	scpi_secure_message_end();
+}
+
+uint32_t scpi_sys_power_state(scpi_system_state_t system_state)
+{
+	scpi_cmd_t *cmd;
+	uint8_t *payload_addr;
+	scpi_cmd_t response;
+
+	scpi_secure_message_start();
+
+	/* Populate the command header */
+	cmd = SCPI_CMD_HEADER_AP_TO_SCP;
+	cmd->id = SCPI_CMD_SYS_POWER_STATE;
+	cmd->set = 0;
+	cmd->sender = 0;
+	cmd->size = sizeof(*payload_addr);
+	/* Populate the command payload */
+	payload_addr = SCPI_CMD_PAYLOAD_AP_TO_SCP;
+	*payload_addr = system_state & 0xff;
+	scpi_secure_message_send(sizeof(*payload_addr));
+
+	scpi_secure_message_receive(&response);
+
+	scpi_secure_message_end();
+
+	return response.status;
+}
+
+uint32_t scpi_get_draminfo(struct draminfo *info)
+{
+	scpi_cmd_t *cmd;
+	struct {
+		scpi_cmd_t	cmd;
+		struct draminfo	info;
+	} response;
+	uint32_t mhu_status;
+
+	scpi_secure_message_start();
+
+	/* Populate the command header */
+	cmd		= SCPI_CMD_HEADER_AP_TO_SCP;
+	cmd->id		= SCPI_CMD_GET_DRAMINFO;
+	cmd->set	= SCPI_SET_EXTENDED;
+	cmd->sender	= 0;
+	cmd->size	= 0;
+
+	scpi_secure_message_send(0);
+
+	mhu_status = mhu_secure_message_wait();
+
+	/* Expect an SCPI message, reject any other protocol */
+	if (mhu_status != (1 << SCPI_MHU_SLOT_ID)) {
+		ERROR("MHU: Unexpected protocol (MHU status: 0x%x)\n",
+			mhu_status);
+		panic();
+	}
+
+	/*
+	 * Ensure that any read to the SCPI payload area is done after reading
+	 * the MHU register. If these 2 reads were reordered then the CPU would
+	 * read invalid payload data
+	 */
+	dmbld();
+
+	memcpy(&response, (void *)SCPI_SHARED_MEM_SCP_TO_AP, sizeof(response));
+
+	scpi_secure_message_end();
+
+	if (response.cmd.status == SCP_OK)
+		*info = response.info;
+
+	return response.cmd.status;
+}
diff --git a/plat/socionext/synquacer/drivers/scpi/sq_scpi.h b/plat/socionext/synquacer/drivers/scpi/sq_scpi.h
new file mode 100644
index 0000000..eb6ce5c
--- /dev/null
+++ b/plat/socionext/synquacer/drivers/scpi/sq_scpi.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SQ_SCPI_H
+#define SQ_SCPI_H
+
+#include <stddef.h>
+#include <stdint.h>
+
+/*
+ * An SCPI command consists of a header and a payload.
+ * The following structure describes the header. It is 64-bit long.
+ */
+typedef struct {
+	/* Command ID */
+	uint32_t id		: 7;
+	/* Set ID. Identifies whether this is a standard or extended command. */
+	uint32_t set		: 1;
+	/* Sender ID to match a reply. The value is sender specific. */
+	uint32_t sender		: 8;
+	/* Size of the payload in bytes (0 - 511) */
+	uint32_t size		: 9;
+	uint32_t reserved	: 7;
+	/*
+	 * Status indicating the success of a command.
+	 * See the enum below.
+	 */
+	uint32_t status;
+} scpi_cmd_t;
+
+typedef enum {
+	SCPI_SET_NORMAL = 0,	/* Normal SCPI commands */
+	SCPI_SET_EXTENDED	/* Extended SCPI commands */
+} scpi_set_t;
+
+enum {
+	SCP_OK = 0,	/* Success */
+	SCP_E_PARAM,	/* Invalid parameter(s) */
+	SCP_E_ALIGN,	/* Invalid alignment */
+	SCP_E_SIZE,	/* Invalid size */
+	SCP_E_HANDLER,	/* Invalid handler or callback */
+	SCP_E_ACCESS,	/* Invalid access or permission denied */
+	SCP_E_RANGE,	/* Value out of range */
+	SCP_E_TIMEOUT,	/* Time out has ocurred */
+	SCP_E_NOMEM,	/* Invalid memory area or pointer */
+	SCP_E_PWRSTATE,	/* Invalid power state */
+	SCP_E_SUPPORT,	/* Feature not supported or disabled */
+	SCPI_E_DEVICE,	/* Device error */
+	SCPI_E_BUSY,	/* Device is busy */
+};
+
+typedef uint32_t scpi_status_t;
+
+typedef enum {
+	SCPI_CMD_SCP_READY = 0x01,
+	SCPI_CMD_SET_POWER_STATE = 0x03,
+	SCPI_CMD_SYS_POWER_STATE = 0x05
+} scpi_command_t;
+
+typedef enum {
+	scpi_power_on = 0,
+	scpi_power_retention = 1,
+	scpi_power_off = 3,
+} scpi_power_state_t;
+
+typedef enum {
+	scpi_system_shutdown = 0,
+	scpi_system_reboot = 1,
+	scpi_system_reset = 2
+} scpi_system_state_t;
+
+extern int scpi_wait_ready(void);
+extern void scpi_set_sq_power_state(unsigned int mpidr,
+					scpi_power_state_t cpu_state,
+					scpi_power_state_t cluster_state,
+					scpi_power_state_t css_state);
+uint32_t scpi_sys_power_state(scpi_system_state_t system_state);
+uint32_t scpi_get_draminfo(struct draminfo *info);
+
+#endif /* SQ_SCPI_H */
diff --git a/plat/socionext/synquacer/include/plat.ld.S b/plat/socionext/synquacer/include/plat.ld.S
new file mode 100644
index 0000000..af7a172
--- /dev/null
+++ b/plat/socionext/synquacer/include/plat.ld.S
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SYNQUACER_PLAT_LD_S__
+#define SYNQUACER_PLAT_LD_S__
+
+#include <lib/xlat_tables/xlat_tables_defs.h>
+
+#define SPM_SHIM_EXCEPTIONS_VMA		SP_DRAM
+
+MEMORY {
+	SP_DRAM (rw): ORIGIN = PLAT_SQ_SP_PRIV_BASE, LENGTH = PLAT_SQ_SP_PRIV_SIZE
+}
+
+SECTIONS
+{
+	/*
+	 * Put the page tables in secure DRAM so that the PTW can make cacheable
+	 * accesses, as the core SPM code expects. (The SRAM on SynQuacer does
+	 * not support inner shareable WBWA mappings so it is mapped normal
+	 * non-cacheable)
+	 */
+	sp_xlat_table (NOLOAD) : ALIGN(PAGE_SIZE) {
+		*(sp_xlat_table)
+	} >SP_DRAM
+}
+
+#endif /* SYNQUACER_PLAT_LD_S__ */
diff --git a/plat/socionext/synquacer/include/plat_macros.S b/plat/socionext/synquacer/include/plat_macros.S
new file mode 100644
index 0000000..932b21d
--- /dev/null
+++ b/plat/socionext/synquacer/include/plat_macros.S
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_MACROS_S
+#define PLAT_MACROS_S
+
+/*
+ * Print CCN registers
+ */
+	.macro plat_crash_print_regs
+	.endm
+
+#endif /* PLAT_MACROS_S */
diff --git a/plat/socionext/synquacer/include/platform_def.h b/plat/socionext/synquacer/include/platform_def.h
new file mode 100644
index 0000000..d6bfe42
--- /dev/null
+++ b/plat/socionext/synquacer/include/platform_def.h
@@ -0,0 +1,207 @@
+/*
+ * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <lib/utils_def.h>
+#include <plat/common/common_def.h>
+
+/* CPU topology */
+#define PLAT_MAX_CORES_PER_CLUSTER	U(2)
+#define PLAT_CLUSTER_COUNT		U(12)
+#define PLATFORM_CORE_COUNT		(PLAT_CLUSTER_COUNT *	\
+					 PLAT_MAX_CORES_PER_CLUSTER)
+
+/* Macros to read the SQ power domain state */
+#define SQ_PWR_LVL0		MPIDR_AFFLVL0
+#define SQ_PWR_LVL1		MPIDR_AFFLVL1
+#define SQ_PWR_LVL2		MPIDR_AFFLVL2
+
+#define SQ_CORE_PWR_STATE(state)	(state)->pwr_domain_state[SQ_PWR_LVL0]
+#define SQ_CLUSTER_PWR_STATE(state)	(state)->pwr_domain_state[SQ_PWR_LVL1]
+#define SQ_SYSTEM_PWR_STATE(state)	((PLAT_MAX_PWR_LVL > SQ_PWR_LVL1) ?\
+				(state)->pwr_domain_state[SQ_PWR_LVL2] : 0)
+
+#define PLAT_MAX_PWR_LVL		U(1)
+#define PLAT_MAX_RET_STATE		U(1)
+#define PLAT_MAX_OFF_STATE		U(2)
+
+#define SQ_LOCAL_STATE_RUN		0
+#define SQ_LOCAL_STATE_RET		1
+#define SQ_LOCAL_STATE_OFF		2
+
+#define CACHE_WRITEBACK_SHIFT		6
+#define CACHE_WRITEBACK_GRANULE		(1 << CACHE_WRITEBACK_SHIFT)
+
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
+#define MAX_XLAT_TABLES			8
+#define MAX_MMAP_REGIONS		8
+
+#if TRUSTED_BOARD_BOOT
+#define PLATFORM_STACK_SIZE		0x1000
+#else
+#define PLATFORM_STACK_SIZE		0x400
+#endif
+
+#if !RESET_TO_BL31
+
+/* A mailbox page will be mapped from BL2 and BL31 */
+#define BL2_MAILBOX_BASE		0x0403f000
+#define BL2_MAILBOX_SIZE		0x1000
+
+#define PLAT_SQ_BOOTIDX_BASE		0x08510000
+#define PLAT_SQ_MAX_BOOT_INDEX		2
+
+#define MAX_IO_HANDLES			2
+#define MAX_IO_DEVICES			2
+#define MAX_IO_BLOCK_DEVICES	U(1)
+
+#define BL2_BASE			0x04000000
+#define BL2_SIZE			(256 * 1024)
+#define BL2_LIMIT			(BL2_BASE + BL2_SIZE)
+
+/* If BL2 is enabled, the BL31 is loaded on secure DRAM */
+#define BL31_BASE			0xfbe00000
+#define BL31_SIZE			0x00100000
+#else
+
+#define BL31_BASE			0x04000000
+#define BL31_SIZE			0x00080000
+#endif
+
+#define BL31_LIMIT			(BL31_BASE + BL31_SIZE)
+
+#define BL32_BASE			0xfc000000
+#define BL32_SIZE			0x03c00000
+#define BL32_LIMIT			(BL32_BASE + BL32_SIZE)
+
+/* Alternative BL33 */
+#define PLAT_SQ_BL33_BASE		0xe0000000
+#define PLAT_SQ_BL33_SIZE		0x00200000
+
+/* FWU FIP IO base */
+#define PLAT_SQ_FIP_IOBASE		0x08600000
+#define PLAT_SQ_FIP_MAXSIZE		0x00400000
+
+#define PLAT_SQ_CCN_BASE		0x32000000
+#define PLAT_SQ_CLUSTER_TO_CCN_ID_MAP					\
+					0,	/* Cluster 0 */		\
+					18,	/* Cluster 1 */		\
+					11,	/* Cluster 2 */		\
+					29,	/* Cluster 3 */		\
+					35,	/* Cluster 4 */		\
+					17,	/* Cluster 5 */		\
+					12,	/* Cluster 6 */		\
+					30,	/* Cluster 7 */		\
+					14,	/* Cluster 8 */		\
+					32,	/* Cluster 9 */		\
+					15,	/* Cluster 10 */	\
+					33	/* Cluster 11 */
+
+/* UART related constants */
+#define PLAT_SQ_BOOT_UART_BASE		0x2A400000
+#define PLAT_SQ_BOOT_UART_CLK_IN_HZ	62500000
+#define SQ_CONSOLE_BAUDRATE		115200
+
+#define SQ_SYS_CNTCTL_BASE		0x2a430000
+
+#define SQ_SYS_TIMCTL_BASE		0x2a810000
+#define PLAT_SQ_NSTIMER_FRAME_ID	0
+#define SQ_SYS_CNT_BASE_NS		0x2a830000
+
+#define DRAMINFO_BASE			0x2E00FFC0
+
+#define PLAT_SQ_MHU_BASE		0x45000000
+
+#define PLAT_SQ_SCP_COM_SHARED_MEM_BASE		0x45400000
+#define SCPI_CMD_GET_DRAMINFO			0x1
+
+#define SQ_BOOT_CFG_ADDR			0x45410000
+#define PLAT_SQ_PRIMARY_CPU_SHIFT		8
+#define PLAT_SQ_PRIMARY_CPU_BIT_WIDTH		6
+
+#define PLAT_SQ_GICD_BASE		0x30000000
+#define PLAT_SQ_GICR_BASE		0x30400000
+
+#define PLAT_SQ_GPIO_BASE		0x51000000
+
+#define PLAT_SPM_BUF_BASE		(BL32_LIMIT - 32 * PLAT_SPM_BUF_SIZE)
+#define PLAT_SPM_BUF_SIZE		ULL(0x10000)
+#define PLAT_SPM_SPM_BUF_EL0_MMAP	MAP_REGION2(PLAT_SPM_BUF_BASE, \
+						    PLAT_SPM_BUF_BASE, \
+						    PLAT_SPM_BUF_SIZE, \
+						    MT_RO_DATA | MT_SECURE | \
+						    MT_USER, PAGE_SIZE)
+
+#define PLAT_SP_IMAGE_NS_BUF_BASE	BL32_LIMIT
+#define PLAT_SP_IMAGE_NS_BUF_SIZE	ULL(0x200000)
+#define PLAT_SP_IMAGE_NS_BUF_MMAP	MAP_REGION2(PLAT_SP_IMAGE_NS_BUF_BASE, \
+						    PLAT_SP_IMAGE_NS_BUF_BASE, \
+						    PLAT_SP_IMAGE_NS_BUF_SIZE, \
+						    MT_RW_DATA | MT_NS | \
+						    MT_USER, PAGE_SIZE)
+
+#define PLAT_SP_IMAGE_STACK_PCPU_SIZE	ULL(0x10000)
+#define PLAT_SP_IMAGE_STACK_SIZE	(32 * PLAT_SP_IMAGE_STACK_PCPU_SIZE)
+#define PLAT_SP_IMAGE_STACK_BASE	(PLAT_SQ_SP_HEAP_BASE + PLAT_SQ_SP_HEAP_SIZE)
+
+#define PLAT_SQ_SP_IMAGE_SIZE		ULL(0x200000)
+#define PLAT_SQ_SP_IMAGE_MMAP		MAP_REGION2(BL32_BASE, BL32_BASE, \
+						    PLAT_SQ_SP_IMAGE_SIZE, \
+						    MT_CODE | MT_SECURE | \
+						    MT_USER, PAGE_SIZE)
+
+#define PLAT_SQ_SP_HEAP_BASE		(BL32_BASE + PLAT_SQ_SP_IMAGE_SIZE)
+#define PLAT_SQ_SP_HEAP_SIZE		ULL(0x800000)
+
+#define PLAT_SQ_SP_IMAGE_RW_MMAP	MAP_REGION2(PLAT_SQ_SP_HEAP_BASE, \
+						    PLAT_SQ_SP_HEAP_BASE, \
+						    (PLAT_SQ_SP_HEAP_SIZE + \
+						     PLAT_SP_IMAGE_STACK_SIZE), \
+						    MT_RW_DATA | MT_SECURE | \
+						    MT_USER, PAGE_SIZE)
+
+#define PLAT_SQ_SP_PRIV_BASE		(PLAT_SP_IMAGE_STACK_BASE + \
+					 PLAT_SP_IMAGE_STACK_SIZE)
+#define PLAT_SQ_SP_PRIV_SIZE		ULL(0x40000)
+
+#define PLAT_SP_PRI			0x20
+#define PLAT_PRI_BITS			2
+#define PLAT_SPM_COOKIE_0		ULL(0)
+#define PLAT_SPM_COOKIE_1		ULL(0)
+
+/* Total number of memory regions with distinct properties */
+#define PLAT_SP_IMAGE_NUM_MEM_REGIONS	6
+
+#define PLAT_SP_IMAGE_MMAP_REGIONS	30
+#define PLAT_SP_IMAGE_MAX_XLAT_TABLES	20
+#define PLAT_SP_IMAGE_XLAT_SECTION_NAME	"sp_xlat_table"
+#define PLAT_SP_IMAGE_BASE_XLAT_SECTION_NAME	"sp_xlat_table"
+
+#define PLAT_SQ_UART1_BASE		PLAT_SQ_BOOT_UART_BASE
+#define PLAT_SQ_UART1_SIZE		ULL(0x1000)
+#define PLAT_SQ_UART1_MMAP		MAP_REGION_FLAT(PLAT_SQ_UART1_BASE, \
+							PLAT_SQ_UART1_SIZE, \
+							MT_DEVICE | MT_RW | \
+							MT_NS | MT_PRIVILEGED)
+
+#define PLAT_SQ_PERIPH_BASE		0x50000000
+#define PLAT_SQ_PERIPH_SIZE		ULL(0x8000000)
+#define PLAT_SQ_PERIPH_MMAP		MAP_REGION_FLAT(PLAT_SQ_PERIPH_BASE, \
+							PLAT_SQ_PERIPH_SIZE, \
+							MT_DEVICE | MT_RW | \
+							MT_NS | MT_USER)
+
+#define PLAT_SQ_FLASH_BASE		0x08000000
+#define PLAT_SQ_FLASH_SIZE		ULL(0x8000000)
+#define PLAT_SQ_FLASH_MMAP		MAP_REGION_FLAT(PLAT_SQ_FLASH_BASE, \
+							PLAT_SQ_FLASH_SIZE, \
+							MT_DEVICE | MT_RW | \
+							MT_NS | MT_USER)
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/socionext/synquacer/include/sq_common.h b/plat/socionext/synquacer/include/sq_common.h
new file mode 100644
index 0000000..eef0e1f
--- /dev/null
+++ b/plat/socionext/synquacer/include/sq_common.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SQ_COMMON_H
+#define SQ_COMMON_H
+
+#include <stdint.h>
+
+#include <lib/psci/psci.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+
+struct draminfo {
+	uint32_t	num_regions;
+	uint32_t	reserved;
+	uint64_t	base1;
+	uint64_t	size1;
+	uint64_t	base2;
+	uint64_t	size2;
+	uint64_t	base3;
+	uint64_t	size3;
+};
+
+uint32_t sq_scp_get_draminfo(struct draminfo *info);
+
+void plat_sq_pwrc_setup(void);
+
+void plat_sq_interconnect_init(void);
+void plat_sq_interconnect_enter_coherency(void);
+void plat_sq_interconnect_exit_coherency(void);
+
+unsigned int sq_calc_core_pos(u_register_t mpidr);
+
+void sq_gic_driver_init(void);
+void sq_gic_init(void);
+void sq_gic_cpuif_enable(void);
+void sq_gic_cpuif_disable(void);
+void sq_gic_pcpu_init(void);
+
+int sq_io_setup(void);
+struct image_info *sq_get_image_info(unsigned int image_id);
+void sq_mmap_setup(uintptr_t total_base, size_t total_size,
+		   const struct mmap_region *mmap);
+
+/* SCMI API for power management by SCP */
+void sq_scmi_off(const struct psci_power_state *target_state);
+void sq_scmi_on(u_register_t mpidr);
+void __dead2 sq_scmi_sys_shutdown(void);
+void __dead2 sq_scmi_sys_reboot(void);
+void __dead2 sq_scmi_system_off(int state);
+/* SCMI API for vendor specific protocol */
+uint32_t sq_scmi_get_draminfo(struct draminfo *info);
+
+#endif /* SQ_COMMON_H */
diff --git a/plat/socionext/synquacer/platform.mk b/plat/socionext/synquacer/platform.mk
new file mode 100644
index 0000000..b76ae88
--- /dev/null
+++ b/plat/socionext/synquacer/platform.mk
@@ -0,0 +1,117 @@
+#
+# Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+override PROGRAMMABLE_RESET_ADDRESS	:= 1
+override USE_COHERENT_MEM		:= 1
+override SEPARATE_CODE_AND_RODATA	:= 1
+override ENABLE_SVE_FOR_NS		:= 0
+# Enable workarounds for selected Cortex-A53 erratas.
+ERRATA_A53_855873		:= 1
+
+ifeq (${RESET_TO_BL31}, 1)
+override RESET_TO_BL31          := 1
+override TRUSTED_BOARD_BOOT     := 0
+SQ_USE_SCMI_DRIVER              ?= 0
+else
+override RESET_TO_BL31          := 0
+override BL2_AT_EL3             := 1
+SQ_USE_SCMI_DRIVER              := 1
+BL2_CPPFLAGS                    += -DPLAT_XLAT_TABLES_DYNAMIC
+endif
+
+# Libraries
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_PATH		:=	plat/socionext/synquacer
+PLAT_INCLUDES		:=	-I$(PLAT_PATH)/include		\
+				-I$(PLAT_PATH)/drivers/scpi	\
+				-I$(PLAT_PATH)/drivers/mhu \
+				-Idrivers/arm/css/scmi \
+				-Idrivers/arm/css/scmi/vendor
+
+PLAT_BL_COMMON_SOURCES	+=	$(PLAT_PATH)/sq_helpers.S		\
+				drivers/arm/pl011/aarch64/pl011_console.S \
+				drivers/delay_timer/delay_timer.c	\
+				drivers/delay_timer/generic_delay_timer.c \
+				lib/cpus/aarch64/cortex_a53.S		\
+				$(PLAT_PATH)/sq_xlat_setup.c	\
+				${XLAT_TABLES_LIB_SRCS}
+
+# Include GICv3 driver files
+include drivers/arm/gic/v3/gicv3.mk
+
+ifneq (${RESET_TO_BL31}, 1)
+BL2_SOURCES		+=	common/desc_image_load.c		\
+				drivers/io/io_fip.c			\
+				drivers/io/io_memmap.c			\
+				drivers/io/io_storage.c			\
+				$(PLAT_PATH)/sq_bl2_setup.c		\
+				$(PLAT_PATH)/sq_image_desc.c	\
+				$(PLAT_PATH)/sq_io_storage.c
+
+ifeq (${TRUSTED_BOARD_BOOT},1)
+include drivers/auth/mbedtls/mbedtls_crypto.mk
+include drivers/auth/mbedtls/mbedtls_x509.mk
+BL2_SOURCES		+=	drivers/auth/auth_mod.c			\
+				drivers/auth/crypto_mod.c		\
+				drivers/auth/img_parser_mod.c		\
+				drivers/auth/tbbr/tbbr_cot_common.c	\
+				drivers/auth/tbbr/tbbr_cot_bl2.c	\
+				plat/common/tbbr/plat_tbbr.c		\
+				$(PLAT_PATH)/sq_rotpk.S		\
+				$(PLAT_PATH)/sq_tbbr.c
+
+ROT_KEY			= $(BUILD_PLAT)/rot_key.pem
+ROTPK_HASH		= $(BUILD_PLAT)/rotpk_sha256.bin
+
+$(eval $(call add_define_val,ROTPK_HASH,'"$(ROTPK_HASH)"'))
+$(BUILD_PLAT)/bl2/sq_rotpk.o: $(ROTPK_HASH)
+
+certificates: $(ROT_KEY)
+$(ROT_KEY): | $(BUILD_PLAT)
+	@echo "  OPENSSL $@"
+	$(Q)${OPENSSL_BIN_PATH}/openssl genrsa 2048 > $@ 2>/dev/null
+
+$(ROTPK_HASH): $(ROT_KEY)
+	@echo "  OPENSSL $@"
+	$(Q)${OPENSSL_BIN_PATH}/openssl rsa -in $< -pubout -outform DER 2>/dev/null |\
+	${OPENSSL_BIN_PATH}/openssl dgst -sha256 -binary > $@ 2>/dev/null
+
+endif	# TRUSTED_BOARD_BOOT
+endif
+
+BL31_SOURCES		+=	drivers/arm/ccn/ccn.c			\
+				${GICV3_SOURCES}			\
+				plat/common/plat_gicv3.c		\
+				plat/common/plat_psci_common.c		\
+				$(PLAT_PATH)/sq_bl31_setup.c		\
+				$(PLAT_PATH)/sq_ccn.c			\
+				$(PLAT_PATH)/sq_topology.c		\
+				$(PLAT_PATH)/sq_psci.c			\
+				$(PLAT_PATH)/sq_gicv3.c			\
+				$(PLAT_PATH)/drivers/scp/sq_scp.c
+
+ifeq (${SQ_USE_SCMI_DRIVER},0)
+BL31_SOURCES		+=	$(PLAT_PATH)/drivers/scpi/sq_scpi.c	\
+				$(PLAT_PATH)/drivers/mhu/sq_mhu.c
+else
+BL31_SOURCES		+=	$(PLAT_PATH)/drivers/scp/sq_scmi.c		\
+				drivers/arm/css/scmi/scmi_common.c		\
+				drivers/arm/css/scmi/scmi_pwr_dmn_proto.c	\
+				drivers/arm/css/scmi/scmi_sys_pwr_proto.c	\
+				drivers/arm/css/scmi/vendor/scmi_sq.c	\
+				drivers/arm/css/mhu/css_mhu_doorbell.c
+endif
+
+ifeq (${SPM_MM},1)
+$(eval $(call add_define,PLAT_EXTRA_LD_SCRIPT))
+
+BL31_SOURCES		+=	$(PLAT_PATH)/sq_spm.c
+endif
+
+ifeq (${SQ_USE_SCMI_DRIVER},1)
+$(eval $(call add_define,SQ_USE_SCMI_DRIVER))
+endif
diff --git a/plat/socionext/synquacer/sq_bl2_setup.c b/plat/socionext/synquacer/sq_bl2_setup.c
new file mode 100644
index 0000000..a98d912
--- /dev/null
+++ b/plat/socionext/synquacer/sq_bl2_setup.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (c) 2022, Socionext Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <common/image_decompress.h>
+#include <drivers/arm/pl011.h>
+#include <drivers/io/io_storage.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+#include <sq_common.h>
+
+static console_t console;
+
+void bl2_el3_early_platform_setup(u_register_t x0, u_register_t x1,
+				  u_register_t x2, u_register_t x3)
+{
+	/* Initialize the console to provide early debug support */
+	(void)console_pl011_register(PLAT_SQ_BOOT_UART_BASE,
+			       PLAT_SQ_BOOT_UART_CLK_IN_HZ,
+			       SQ_CONSOLE_BAUDRATE, &console);
+	console_set_scope(&console, CONSOLE_FLAG_BOOT);
+}
+
+void bl2_el3_plat_arch_setup(void)
+{
+	int ret;
+
+	sq_mmap_setup(BL2_BASE, BL2_SIZE, NULL);
+
+	ret = sq_io_setup();
+	if (ret) {
+		ERROR("failed to setup io devices\n");
+		plat_error_handler(ret);
+	}
+}
+
+void bl2_platform_setup(void)
+{
+}
+
+void plat_flush_next_bl_params(void)
+{
+	flush_bl_params_desc();
+}
+
+bl_load_info_t *plat_get_bl_image_load_info(void)
+{
+	return get_bl_load_info_from_mem_params_desc();
+}
+
+bl_params_t *plat_get_next_bl_params(void)
+{
+	return get_next_bl_params_from_mem_params_desc();
+}
+
+void bl2_plat_preload_setup(void)
+{
+}
+
+int bl2_plat_handle_pre_image_load(unsigned int image_id)
+{
+	struct image_info *image_info;
+
+	image_info = sq_get_image_info(image_id);
+
+	return mmap_add_dynamic_region(image_info->image_base,
+				      image_info->image_base,
+				      image_info->image_max_size,
+				      MT_MEMORY | MT_RW | MT_NS);
+}
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return 0;
+}
diff --git a/plat/socionext/synquacer/sq_bl31_setup.c b/plat/socionext/synquacer/sq_bl31_setup.c
new file mode 100644
index 0000000..967437b
--- /dev/null
+++ b/plat/socionext/synquacer/sq_bl31_setup.c
@@ -0,0 +1,247 @@
+/*
+ * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/arm/pl011.h>
+#include <lib/mmio.h>
+#include <sq_common.h>
+
+static console_t console;
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+IMPORT_SYM(uintptr_t, __SPM_SHIM_EXCEPTIONS_START__, SPM_SHIM_EXCEPTIONS_START);
+IMPORT_SYM(uintptr_t, __SPM_SHIM_EXCEPTIONS_END__,   SPM_SHIM_EXCEPTIONS_END);
+IMPORT_SYM(uintptr_t, __SPM_SHIM_EXCEPTIONS_LMA__,   SPM_SHIM_EXCEPTIONS_LMA);
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	unsigned int counter_base_frequency;
+
+	/* Read the frequency from Frequency modes table */
+	counter_base_frequency = mmio_read_32(SQ_SYS_CNTCTL_BASE + CNTFID_OFF);
+
+	/* The first entry of the frequency modes table must not be 0 */
+	if (counter_base_frequency == 0)
+		panic();
+
+	return counter_base_frequency;
+}
+
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+	assert(sec_state_is_valid(type));
+	return type == NON_SECURE ? &bl33_image_ep_info : &bl32_image_ep_info;
+}
+
+#if !RESET_TO_BL31
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+				u_register_t arg2, u_register_t arg3)
+{
+	void *from_bl2 = (void *) arg0;
+	bl_params_node_t *bl_params = ((bl_params_t *) from_bl2)->head;
+
+	/* Initialize the console to provide early debug support */
+	(void)console_pl011_register(PLAT_SQ_BOOT_UART_BASE,
+			       PLAT_SQ_BOOT_UART_CLK_IN_HZ,
+			       SQ_CONSOLE_BAUDRATE, &console);
+
+	console_set_scope(&console, CONSOLE_FLAG_BOOT | CONSOLE_FLAG_RUNTIME);
+
+	/* Initialize power controller before setting up topology */
+	plat_sq_pwrc_setup();
+
+	while (bl_params) {
+		if (bl_params->image_id == BL32_IMAGE_ID)
+			bl32_image_ep_info = *bl_params->ep_info;
+
+		if (bl_params->image_id == BL33_IMAGE_ID)
+			bl33_image_ep_info = *bl_params->ep_info;
+
+		bl_params = bl_params->next_params_info;
+	}
+}
+
+#else
+/*******************************************************************************
+ * Gets SPSR for BL32 entry
+ ******************************************************************************/
+uint32_t sq_get_spsr_for_bl32_entry(void)
+{
+	/*
+	 * The Secure Payload Dispatcher service is responsible for
+	 * setting the SPSR prior to entry into the BL32 image.
+	 */
+	return 0;
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+uint32_t sq_get_spsr_for_bl33_entry(void)
+{
+	unsigned long el_status;
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+	el_status &= ID_AA64PFR0_ELX_MASK;
+
+	mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+				u_register_t arg2, u_register_t arg3)
+{
+	/* Initialize the console to provide early debug support */
+	(void)console_pl011_register(PLAT_SQ_BOOT_UART_BASE,
+			       PLAT_SQ_BOOT_UART_CLK_IN_HZ,
+			       SQ_CONSOLE_BAUDRATE, &console);
+
+	console_set_scope(&console, CONSOLE_FLAG_BOOT | CONSOLE_FLAG_RUNTIME);
+
+	/* There are no parameters from BL2 if BL31 is a reset vector */
+	assert(arg0 == 0U);
+	assert(arg1 == 0U);
+
+	/* Initialize power controller before setting up topology */
+	plat_sq_pwrc_setup();
+
+#ifdef SPD_opteed
+	struct draminfo di = {0};
+
+	sq_scp_get_draminfo(&di);
+
+	/*
+	 * Check if OP-TEE has been loaded in Secure RAM allocated
+	 * from DRAM1 region
+	 */
+	if ((di.base1 + di.size1) <= BL32_BASE) {
+		NOTICE("OP-TEE has been loaded by SCP firmware\n");
+		/* Populate entry point information for BL32 */
+		SET_PARAM_HEAD(&bl32_image_ep_info,
+					PARAM_EP,
+					VERSION_1,
+					0);
+		SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+		bl32_image_ep_info.pc = BL32_BASE;
+		bl32_image_ep_info.spsr = sq_get_spsr_for_bl32_entry();
+	} else {
+		NOTICE("OP-TEE has not been loaded by SCP firmware\n");
+	}
+#endif /* SPD_opteed */
+
+	/* Populate entry point information for BL33 */
+	SET_PARAM_HEAD(&bl33_image_ep_info,
+				PARAM_EP,
+				VERSION_1,
+				0);
+	/*
+	 * Tell BL31 where the non-trusted software image
+	 * is located and the entry state information
+	 */
+	bl33_image_ep_info.pc = PRELOADED_BL33_BASE;
+	bl33_image_ep_info.spsr = sq_get_spsr_for_bl33_entry();
+	SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+}
+#endif
+
+static void sq_configure_sys_timer(void)
+{
+	unsigned int reg_val;
+	unsigned int freq_val = plat_get_syscnt_freq2();
+
+	reg_val = (1 << CNTACR_RPCT_SHIFT) | (1 << CNTACR_RVCT_SHIFT);
+	reg_val |= (1 << CNTACR_RFRQ_SHIFT) | (1 << CNTACR_RVOFF_SHIFT);
+	reg_val |= (1 << CNTACR_RWVT_SHIFT) | (1 << CNTACR_RWPT_SHIFT);
+	mmio_write_32(SQ_SYS_TIMCTL_BASE +
+		      CNTACR_BASE(PLAT_SQ_NSTIMER_FRAME_ID), reg_val);
+
+	reg_val = (1 << CNTNSAR_NS_SHIFT(PLAT_SQ_NSTIMER_FRAME_ID));
+	mmio_write_32(SQ_SYS_TIMCTL_BASE + CNTNSAR, reg_val);
+
+	/* Initialize CNTFRQ register in CNTCTLBase frame */
+	mmio_write_32(SQ_SYS_TIMCTL_BASE + CNTCTLBASE_CNTFRQ, freq_val);
+
+	/*
+	 * Initialize CNTFRQ register in Non-secure CNTBase frame.
+	 * This is required for SynQuacer, because it does not
+	 * follow ARM ARM in that the value updated in CNTFRQ is not
+	 * reflected in CNTBASEN_CNTFRQ. Hence update the value manually.
+	 */
+	mmio_write_32(SQ_SYS_CNT_BASE_NS + CNTBASEN_CNTFRQ, freq_val);
+}
+
+void bl31_platform_setup(void)
+{
+	/* Initialize the CCN interconnect */
+	plat_sq_interconnect_init();
+	plat_sq_interconnect_enter_coherency();
+
+	/* Initialize the GIC driver, cpu and distributor interfaces */
+	sq_gic_driver_init();
+	sq_gic_init();
+
+	/* Enable and initialize the System level generic timer */
+	mmio_write_32(SQ_SYS_CNTCTL_BASE + CNTCR_OFF,
+			CNTCR_FCREQ(0U) | CNTCR_EN);
+
+	/* Allow access to the System counter timer module */
+	sq_configure_sys_timer();
+}
+
+void bl31_plat_runtime_setup(void)
+{
+	struct draminfo *di = (struct draminfo *)(unsigned long)DRAMINFO_BASE;
+
+	sq_scp_get_draminfo(di);
+}
+
+void bl31_plat_arch_setup(void)
+{
+	static const mmap_region_t secure_partition_mmap[] = {
+#if SPM_MM
+		MAP_REGION_FLAT(PLAT_SPM_BUF_BASE,
+				PLAT_SPM_BUF_SIZE,
+				MT_RW_DATA | MT_SECURE),
+		MAP_REGION_FLAT(PLAT_SQ_SP_PRIV_BASE,
+				PLAT_SQ_SP_PRIV_SIZE,
+				MT_RW_DATA | MT_SECURE),
+#endif
+#if !RESET_TO_BL31
+		MAP_REGION_FLAT(BL2_MAILBOX_BASE,
+				BL2_MAILBOX_SIZE,
+				MT_RW | MT_SECURE),
+#endif
+		{0},
+	};
+
+	sq_mmap_setup(BL31_BASE, BL31_SIZE, secure_partition_mmap);
+	enable_mmu_el3(XLAT_TABLE_NC);
+
+#if SPM_MM
+	memcpy((void *)SPM_SHIM_EXCEPTIONS_START,
+	       (void *)SPM_SHIM_EXCEPTIONS_LMA,
+	       (uintptr_t)SPM_SHIM_EXCEPTIONS_END -
+	       (uintptr_t)SPM_SHIM_EXCEPTIONS_START);
+#endif
+}
+
+void bl31_plat_enable_mmu(uint32_t flags)
+{
+	enable_mmu_el3(flags | XLAT_TABLE_NC);
+}
diff --git a/plat/socionext/synquacer/sq_ccn.c b/plat/socionext/synquacer/sq_ccn.c
new file mode 100644
index 0000000..fa6ea87
--- /dev/null
+++ b/plat/socionext/synquacer/sq_ccn.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <drivers/arm/ccn.h>
+
+static const unsigned char master_to_rn_id_map[] = {
+	PLAT_SQ_CLUSTER_TO_CCN_ID_MAP
+};
+
+static const ccn_desc_t sq_ccn_desc = {
+	.periphbase = PLAT_SQ_CCN_BASE,
+	.num_masters = ARRAY_SIZE(master_to_rn_id_map),
+	.master_to_rn_id_map = master_to_rn_id_map
+};
+
+/******************************************************************************
+ * Helper function to initialize SQ CCN driver.
+ *****************************************************************************/
+void plat_sq_interconnect_init(void)
+{
+	ccn_init(&sq_ccn_desc);
+}
+
+/******************************************************************************
+ * Helper function to place current master into coherency
+ *****************************************************************************/
+void plat_sq_interconnect_enter_coherency(void)
+{
+	ccn_enter_snoop_dvm_domain(1 << MPIDR_AFFLVL1_VAL(read_mpidr_el1()));
+}
+
+/******************************************************************************
+ * Helper function to remove current master from coherency
+ *****************************************************************************/
+void plat_sq_interconnect_exit_coherency(void)
+{
+	ccn_exit_snoop_dvm_domain(1 << MPIDR_AFFLVL1_VAL(read_mpidr_el1()));
+}
diff --git a/plat/socionext/synquacer/sq_gicv3.c b/plat/socionext/synquacer/sq_gicv3.c
new file mode 100644
index 0000000..05318e3
--- /dev/null
+++ b/plat/socionext/synquacer/sq_gicv3.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <common/interrupt_props.h>
+#include <drivers/arm/gicv3.h>
+#include <plat/common/platform.h>
+
+#include "sq_common.h"
+
+static uintptr_t sq_rdistif_base_addrs[PLATFORM_CORE_COUNT];
+
+static const interrupt_prop_t sq_interrupt_props[] = {
+	/* G0 interrupts */
+
+	/* SGI0 */
+	INTR_PROP_DESC(8, GIC_HIGHEST_SEC_PRIORITY, INTR_GROUP0,
+			GIC_INTR_CFG_EDGE),
+	/* SGI6 */
+	INTR_PROP_DESC(14, GIC_HIGHEST_SEC_PRIORITY, INTR_GROUP0,
+			GIC_INTR_CFG_EDGE),
+
+	/* G1S interrupts */
+
+	/* Timer */
+	INTR_PROP_DESC(29, GIC_HIGHEST_SEC_PRIORITY, INTR_GROUP1S,
+			GIC_INTR_CFG_LEVEL),
+	/* SGI1 */
+	INTR_PROP_DESC(9, GIC_HIGHEST_SEC_PRIORITY, INTR_GROUP1S,
+			GIC_INTR_CFG_EDGE),
+	/* SGI2 */
+	INTR_PROP_DESC(10, GIC_HIGHEST_SEC_PRIORITY, INTR_GROUP1S,
+			GIC_INTR_CFG_EDGE),
+	/* SGI3 */
+	INTR_PROP_DESC(11, GIC_HIGHEST_SEC_PRIORITY, INTR_GROUP1S,
+			GIC_INTR_CFG_EDGE),
+	/* SGI4 */
+	INTR_PROP_DESC(12, GIC_HIGHEST_SEC_PRIORITY, INTR_GROUP1S,
+			GIC_INTR_CFG_EDGE),
+	/* SGI5 */
+	INTR_PROP_DESC(13, GIC_HIGHEST_SEC_PRIORITY, INTR_GROUP1S,
+			GIC_INTR_CFG_EDGE),
+	/* SGI7 */
+	INTR_PROP_DESC(15, GIC_HIGHEST_SEC_PRIORITY, INTR_GROUP1S,
+			GIC_INTR_CFG_EDGE)
+};
+
+static unsigned int sq_mpidr_to_core_pos(u_register_t mpidr)
+{
+	return plat_core_pos_by_mpidr(mpidr);
+}
+
+static const struct gicv3_driver_data sq_gic_driver_data = {
+		.gicd_base = PLAT_SQ_GICD_BASE,
+		.gicr_base = PLAT_SQ_GICR_BASE,
+		.interrupt_props = sq_interrupt_props,
+		.interrupt_props_num = ARRAY_SIZE(sq_interrupt_props),
+		.rdistif_num = PLATFORM_CORE_COUNT,
+		.rdistif_base_addrs = sq_rdistif_base_addrs,
+		.mpidr_to_core_pos = sq_mpidr_to_core_pos,
+};
+
+void sq_gic_driver_init(void)
+{
+	gicv3_driver_init(&sq_gic_driver_data);
+}
+
+void sq_gic_init(void)
+{
+	gicv3_distif_init();
+	gicv3_rdistif_init(plat_my_core_pos());
+	gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+void sq_gic_cpuif_enable(void)
+{
+	gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+void sq_gic_cpuif_disable(void)
+{
+	gicv3_cpuif_disable(plat_my_core_pos());
+}
+
+void sq_gic_pcpu_init(void)
+{
+	gicv3_rdistif_init(plat_my_core_pos());
+}
diff --git a/plat/socionext/synquacer/sq_helpers.S b/plat/socionext/synquacer/sq_helpers.S
new file mode 100644
index 0000000..5f9eab4
--- /dev/null
+++ b/plat/socionext/synquacer/sq_helpers.S
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <assert_macros.S>
+#include <platform_def.h>
+
+	.global	sq_calc_core_pos
+	.global	plat_my_core_pos
+	.global	platform_mem_init
+	.global	plat_is_my_cpu_primary
+	.global plat_secondary_cold_boot_setup
+	.global	plat_crash_console_init
+	.global	plat_crash_console_putc
+	.global	plat_crash_console_flush
+
+/*
+ * unsigned int sq_calc_core_pos(u_register_t mpidr)
+ * core_pos = (cluster_id * max_cpus_per_cluster) + core_id
+ */
+func sq_calc_core_pos
+	and	x1, x0, #MPIDR_CPU_MASK
+	and	x0, x0, #MPIDR_CLUSTER_MASK
+	add	x0, x1, x0, lsr #7
+	ret
+endfunc sq_calc_core_pos
+
+func plat_my_core_pos
+	mrs	x0, mpidr_el1
+	b	sq_calc_core_pos
+endfunc plat_my_core_pos
+
+func platform_mem_init
+	ret
+endfunc platform_mem_init
+
+/*
+ * Secondary CPUs are placed in a holding pen, waiting for their mailbox
+ * to be populated. Note that all CPUs share the same mailbox ; therefore,
+ * populating it will release all CPUs from their holding pen. If
+ * finer-grained control is needed then this should be handled in the
+ * code that secondary CPUs jump to.
+ */
+func plat_secondary_cold_boot_setup
+#if !RESET_TO_BL31
+	mov_imm	x0, BL2_MAILBOX_BASE
+	ldr	x0, [x0]
+#else
+	ldr	x0, sq_sec_entrypoint
+#endif
+
+	/* Wait until the mailbox gets populated */
+poll_mailbox:
+	cbz	x0, 1f
+	br	x0
+1:
+	wfe
+	b	poll_mailbox
+endfunc plat_secondary_cold_boot_setup
+
+/*
+ * Find out whether the current cpu is the primary
+ * cpu (applicable only after a cold boot)
+ */
+func plat_is_my_cpu_primary
+	mov	x9, x30
+	bl	plat_my_core_pos
+	ldr	x1, =SQ_BOOT_CFG_ADDR
+	ldr	x1, [x1]
+	ubfx	x1, x1, #PLAT_SQ_PRIMARY_CPU_SHIFT, \
+			#PLAT_SQ_PRIMARY_CPU_BIT_WIDTH
+	cmp	x0, x1
+	cset	w0, eq
+	ret	x9
+endfunc plat_is_my_cpu_primary
+
+/*
+ * int plat_crash_console_init(void)
+ * Function to initialize the crash console
+ * without a C Runtime to print crash report.
+ * Clobber list : x0, x1, x2
+ */
+func plat_crash_console_init
+	mov_imm x0, PLAT_SQ_BOOT_UART_BASE
+	mov_imm x1, PLAT_SQ_BOOT_UART_CLK_IN_HZ
+	mov_imm x2, SQ_CONSOLE_BAUDRATE
+	b	console_pl011_core_init
+endfunc plat_crash_console_init
+
+/*
+ * int plat_crash_console_putc(int c)
+ * Function to print a character on the crash
+ * console without a C Runtime.
+ * Clobber list : x1, x2
+ */
+func plat_crash_console_putc
+	mov_imm	x1, PLAT_SQ_BOOT_UART_BASE
+	b	console_pl011_core_putc
+endfunc plat_crash_console_putc
+
+/*
+ * void plat_crash_console_flush(int c)
+ * Function to force a write of all buffered
+ * data that hasn't been output.
+ * Out : void.
+ * Clobber list : x0, x1
+ */
+func plat_crash_console_flush
+	mov_imm	x0, PLAT_SQ_BOOT_UART_BASE
+	b	console_pl011_core_flush
+endfunc plat_crash_console_flush
diff --git a/plat/socionext/synquacer/sq_image_desc.c b/plat/socionext/synquacer/sq_image_desc.c
new file mode 100644
index 0000000..5fe125b
--- /dev/null
+++ b/plat/socionext/synquacer/sq_image_desc.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2022, Socionext Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <common/desc_image_load.h>
+
+#include <platform_def.h>
+
+static struct bl_mem_params_node sq_image_descs[] = {
+	{
+		.image_id = BL31_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				      VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = BL31_SIZE,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				      VERSION_2, entry_point_info_t,
+				      SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+					DISABLE_ALL_EXCEPTIONS),
+
+		.next_handoff_image_id = BL32_IMAGE_ID,
+	},
+	{
+		.image_id = BL32_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				      VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_SIZE,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				      VERSION_2, entry_point_info_t,
+				      SECURE | EXECUTABLE),
+		.ep_info.pc = BL32_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+					DISABLE_ALL_EXCEPTIONS),
+
+		.next_handoff_image_id = BL33_IMAGE_ID,
+	},
+	{
+		.image_id = BL33_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				      VERSION_2, image_info_t, 0),
+		.image_info.image_base = PLAT_SQ_BL33_BASE,
+		.image_info.image_max_size = PLAT_SQ_BL33_SIZE,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				      VERSION_2, entry_point_info_t,
+				      NON_SECURE | EXECUTABLE),
+		.ep_info.pc = PLAT_SQ_BL33_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL2, MODE_SP_ELX,
+					DISABLE_ALL_EXCEPTIONS),
+
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+};
+REGISTER_BL_IMAGE_DESCS(sq_image_descs)
+
+struct image_info *sq_get_image_info(unsigned int image_id)
+{
+	struct bl_mem_params_node *desc;
+
+	desc = get_bl_mem_params_node(image_id);
+	assert(desc);
+	return &desc->image_info;
+}
diff --git a/plat/socionext/synquacer/sq_io_storage.c b/plat/socionext/synquacer/sq_io_storage.c
new file mode 100644
index 0000000..ea83dad
--- /dev/null
+++ b/plat/socionext/synquacer/sq_io_storage.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright (c) 2022, Socionext Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stdint.h>
+
+#include <drivers/io/io_block.h>
+#include <drivers/io/io_driver.h>
+#include <drivers/io/io_fip.h>
+#include <drivers/io/io_memmap.h>
+#include <lib/mmio.h>
+#include <lib/utils_def.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <tools_share/firmware_image_package.h>
+
+#include <platform_def.h>
+#include <sq_common.h>
+
+static const io_dev_connector_t *sq_fip_dev_con;
+static uintptr_t sq_fip_dev_handle;
+
+static const io_dev_connector_t *sq_backend_dev_con;
+static uintptr_t sq_backend_dev_handle;
+
+static io_block_spec_t sq_fip_spec = {
+	.offset = PLAT_SQ_FIP_IOBASE,	/* FIP Image is at 5MB offset on memory-mapped NOR flash */
+	.length = PLAT_SQ_FIP_MAXSIZE,	/* Expected maximum FIP image size */
+};
+
+static const io_uuid_spec_t sq_bl2_spec = {
+	.uuid = UUID_TRUSTED_BOOT_FIRMWARE_BL2,
+};
+
+static const io_uuid_spec_t sq_bl31_spec = {
+	.uuid = UUID_EL3_RUNTIME_FIRMWARE_BL31,
+};
+
+static const io_uuid_spec_t sq_bl32_spec = {
+	.uuid = UUID_SECURE_PAYLOAD_BL32,
+};
+
+static const io_uuid_spec_t sq_bl33_spec = {
+	.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
+};
+
+#if TRUSTED_BOARD_BOOT
+static const io_uuid_spec_t sq_tb_fw_cert_spec = {
+	.uuid = UUID_TRUSTED_BOOT_FW_CERT,
+};
+
+static const io_uuid_spec_t sq_trusted_key_cert_spec = {
+	.uuid = UUID_TRUSTED_KEY_CERT,
+};
+
+static const io_uuid_spec_t sq_soc_fw_key_cert_spec = {
+	.uuid = UUID_SOC_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t sq_tos_fw_key_cert_spec = {
+	.uuid = UUID_TRUSTED_OS_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t sq_nt_fw_key_cert_spec = {
+	.uuid = UUID_NON_TRUSTED_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t sq_soc_fw_cert_spec = {
+	.uuid = UUID_SOC_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t sq_tos_fw_cert_spec = {
+	.uuid = UUID_TRUSTED_OS_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t sq_nt_fw_cert_spec = {
+	.uuid = UUID_NON_TRUSTED_FW_CONTENT_CERT,
+};
+#endif /* TRUSTED_BOARD_BOOT */
+
+struct sq_io_policy {
+	uintptr_t *dev_handle;
+	uintptr_t image_spec;
+	uintptr_t init_params;
+};
+
+static const struct sq_io_policy sq_io_policies[] = {
+	[FIP_IMAGE_ID] = {
+		.dev_handle = &sq_backend_dev_handle,
+		.image_spec = (uintptr_t)&sq_fip_spec,
+	},
+	[BL2_IMAGE_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_bl2_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+	[BL31_IMAGE_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_bl31_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+	[BL32_IMAGE_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_bl32_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+	[BL33_IMAGE_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_bl33_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+#if TRUSTED_BOARD_BOOT
+	[TRUSTED_BOOT_FW_CERT_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_tb_fw_cert_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+	[TRUSTED_KEY_CERT_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_trusted_key_cert_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+	[SOC_FW_KEY_CERT_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_soc_fw_key_cert_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+	[TRUSTED_OS_FW_KEY_CERT_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_tos_fw_key_cert_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+	[NON_TRUSTED_FW_KEY_CERT_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_nt_fw_key_cert_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+	[SOC_FW_CONTENT_CERT_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_soc_fw_cert_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+	[TRUSTED_OS_FW_CONTENT_CERT_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_tos_fw_cert_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+	[NON_TRUSTED_FW_CONTENT_CERT_ID] = {
+		.dev_handle = &sq_fip_dev_handle,
+		.image_spec = (uintptr_t)&sq_nt_fw_cert_spec,
+		.init_params = FIP_IMAGE_ID,
+	},
+#endif
+};
+
+static int sq_update_fip_spec(void)
+{
+	uint32_t boot_index;
+	int ret;
+
+	ret = mmap_add_dynamic_region(PLAT_SQ_BOOTIDX_BASE, PLAT_SQ_BOOTIDX_BASE,
+				      PAGE_SIZE, MT_RO_DATA | MT_SECURE);
+	if (ret) {
+		return ret;
+	}
+
+	boot_index = mmio_read_32(PLAT_SQ_BOOTIDX_BASE);
+	if (boot_index < PLAT_SQ_MAX_BOOT_INDEX) {
+		sq_fip_spec.offset += PLAT_SQ_FIP_MAXSIZE * boot_index;
+		INFO("FWU Enabled: boot_index %d\n", boot_index);
+	} else {
+		WARN("FWU Disabled: wrong boot_index value. Fallback to index 0.\n");
+	}
+
+	mmap_remove_dynamic_region(PLAT_SQ_BOOTIDX_BASE, PAGE_SIZE);
+	return 0;
+}
+
+static int sq_io_memmap_setup(void)
+{
+	int ret;
+
+	ret = sq_update_fip_spec();
+	if (ret) {
+		return ret;
+	}
+
+	ret = mmap_add_dynamic_region(sq_fip_spec.offset, sq_fip_spec.offset,
+				      sq_fip_spec.length, MT_RO_DATA | MT_SECURE);
+	if (ret) {
+		return ret;
+	}
+
+	ret = register_io_dev_memmap(&sq_backend_dev_con);
+	if (ret) {
+		return ret;
+	}
+
+	return io_dev_open(sq_backend_dev_con, 0, &sq_backend_dev_handle);
+}
+
+static int sq_io_fip_setup(void)
+{
+	int ret;
+
+	ret = register_io_dev_fip(&sq_fip_dev_con);
+	if (ret) {
+		return ret;
+	}
+
+	return io_dev_open(sq_fip_dev_con, 0, &sq_fip_dev_handle);
+}
+
+int sq_io_setup(void)
+{
+	int ret;
+
+	ret = sq_io_memmap_setup();
+	if (ret) {
+		return ret;
+	}
+
+	ret = sq_io_fip_setup();
+	if (ret) {
+		return ret;
+	}
+
+	return 0;
+}
+
+int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
+			  uintptr_t *image_spec)
+{
+	uintptr_t init_params;
+
+	assert(image_id < ARRAY_SIZE(sq_io_policies));
+
+	*dev_handle = *sq_io_policies[image_id].dev_handle;
+	*image_spec = sq_io_policies[image_id].image_spec;
+	init_params = sq_io_policies[image_id].init_params;
+
+	return io_dev_init(*dev_handle, init_params);
+}
diff --git a/plat/socionext/synquacer/sq_psci.c b/plat/socionext/synquacer/sq_psci.c
new file mode 100644
index 0000000..017516f
--- /dev/null
+++ b/plat/socionext/synquacer/sq_psci.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <drivers/generic_delay_timer.h>
+#include <lib/cassert.h>
+#include <lib/psci/psci.h>
+
+#include <sq_common.h>
+#include "sq_scpi.h"
+
+uintptr_t sq_sec_entrypoint;
+
+int sq_pwr_domain_on(u_register_t mpidr)
+{
+#if SQ_USE_SCMI_DRIVER
+	sq_scmi_on(mpidr);
+#else
+	/*
+	 * SCP takes care of powering up parent power domains so we
+	 * only need to care about level 0
+	 */
+	scpi_set_sq_power_state(mpidr, scpi_power_on, scpi_power_on,
+				 scpi_power_on);
+#endif
+
+	return PSCI_E_SUCCESS;
+}
+
+static void sq_pwr_domain_on_finisher_common(
+		const psci_power_state_t *target_state)
+{
+	assert(SQ_CORE_PWR_STATE(target_state) == SQ_LOCAL_STATE_OFF);
+
+	/*
+	 * Perform the common cluster specific operations i.e enable coherency
+	 * if this cluster was off.
+	 */
+	if (SQ_CLUSTER_PWR_STATE(target_state) == SQ_LOCAL_STATE_OFF)
+		plat_sq_interconnect_enter_coherency();
+}
+
+void sq_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	/* Assert that the system power domain need not be initialized */
+	assert(SQ_SYSTEM_PWR_STATE(target_state) == SQ_LOCAL_STATE_RUN);
+
+	sq_pwr_domain_on_finisher_common(target_state);
+
+	/* Program the gic per-cpu distributor or re-distributor interface */
+	sq_gic_pcpu_init();
+
+	/* Enable the gic cpu interface */
+	sq_gic_cpuif_enable();
+}
+
+#if !SQ_USE_SCMI_DRIVER
+static void sq_power_down_common(const psci_power_state_t *target_state)
+{
+	uint32_t cluster_state = scpi_power_on;
+	uint32_t system_state = scpi_power_on;
+
+	/* Prevent interrupts from spuriously waking up this cpu */
+	sq_gic_cpuif_disable();
+
+	/* Check if power down at system power domain level is requested */
+	if (SQ_SYSTEM_PWR_STATE(target_state) == SQ_LOCAL_STATE_OFF)
+		system_state = scpi_power_retention;
+
+	/* Cluster is to be turned off, so disable coherency */
+	if (SQ_CLUSTER_PWR_STATE(target_state) == SQ_LOCAL_STATE_OFF) {
+		plat_sq_interconnect_exit_coherency();
+		cluster_state = scpi_power_off;
+	}
+
+	/*
+	 * Ask the SCP to power down the appropriate components depending upon
+	 * their state.
+	 */
+	scpi_set_sq_power_state(read_mpidr_el1(),
+				 scpi_power_off,
+				 cluster_state,
+				 system_state);
+}
+#endif
+
+void sq_pwr_domain_off(const psci_power_state_t *target_state)
+{
+#if SQ_USE_SCMI_DRIVER
+	/* Prevent interrupts from spuriously waking up this cpu */
+	sq_gic_cpuif_disable();
+
+	/* Cluster is to be turned off, so disable coherency */
+	if (SQ_CLUSTER_PWR_STATE(target_state) == SQ_LOCAL_STATE_OFF) {
+		plat_sq_interconnect_exit_coherency();
+	}
+
+	sq_scmi_off(target_state);
+#else
+	sq_power_down_common(target_state);
+#endif
+}
+
+void __dead2 sq_system_off(void)
+{
+#if SQ_USE_SCMI_DRIVER
+	sq_scmi_sys_shutdown();
+#else
+	volatile uint32_t *gpio = (uint32_t *)PLAT_SQ_GPIO_BASE;
+
+	/* set PD[9] high to power off the system */
+	gpio[5] |= 0x2;		/* set output */
+	gpio[1] |= 0x2;		/* set high */
+	dmbst();
+
+	generic_delay_timer_init();
+
+	mdelay(1);
+
+	while (1) {
+		gpio[1] &= ~0x2;	/* set low */
+		dmbst();
+
+		mdelay(1);
+
+		gpio[1] |= 0x2;		/* set high */
+		dmbst();
+
+		mdelay(100);
+	}
+
+	wfi();
+	ERROR("SQ System Off: operation not handled.\n");
+	panic();
+#endif
+}
+
+void __dead2 sq_system_reset(void)
+{
+#if SQ_USE_SCMI_DRIVER
+	sq_scmi_sys_reboot();
+#else
+	uint32_t response;
+
+	/* Send the system reset request to the SCP */
+	response = scpi_sys_power_state(scpi_system_reboot);
+
+	if (response != SCP_OK) {
+		ERROR("SQ System Reset: SCP error %u.\n", response);
+		panic();
+	}
+	wfi();
+	ERROR("SQ System Reset: operation not handled.\n");
+	panic();
+#endif
+}
+
+void sq_cpu_standby(plat_local_state_t cpu_state)
+{
+	u_register_t scr;
+
+	assert(cpu_state == SQ_LOCAL_STATE_RET);
+
+	scr = read_scr_el3();
+	/* Enable PhysicalIRQ bit for NS world to wake the CPU */
+	write_scr_el3(scr | SCR_IRQ_BIT);
+	isb();
+	dsb();
+	wfi();
+
+	/*
+	 * Restore SCR to the original value, synchronisation of scr_el3 is
+	 * done by eret while el3_exit to save some execution cycles.
+	 */
+	write_scr_el3(scr);
+}
+
+const plat_psci_ops_t sq_psci_ops = {
+	.pwr_domain_on		= sq_pwr_domain_on,
+	.pwr_domain_off		= sq_pwr_domain_off,
+	.pwr_domain_on_finish	= sq_pwr_domain_on_finish,
+	.cpu_standby		= sq_cpu_standby,
+	.system_off		= sq_system_off,
+	.system_reset		= sq_system_reset,
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const struct plat_psci_ops **psci_ops)
+{
+#if !RESET_TO_BL31
+	uintptr_t *sq_sec_ep = (uintptr_t *)BL2_MAILBOX_BASE;
+
+	*sq_sec_ep = sec_entrypoint;
+	flush_dcache_range((uint64_t)sq_sec_ep,
+			   sizeof(*sq_sec_ep));
+#else
+	sq_sec_entrypoint = sec_entrypoint;
+	flush_dcache_range((uint64_t)&sq_sec_entrypoint,
+			   sizeof(sq_sec_entrypoint));
+#endif
+
+	*psci_ops = &sq_psci_ops;
+
+	return 0;
+}
diff --git a/plat/socionext/synquacer/sq_rotpk.S b/plat/socionext/synquacer/sq_rotpk.S
new file mode 100644
index 0000000..61227ed
--- /dev/null
+++ b/plat/socionext/synquacer/sq_rotpk.S
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2022, Socionext Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+	.global sq_rotpk_hash
+	.global sq_rotpk_hash_end
+	.section .rodata.sq_rotpk_hash, "a"
+sq_rotpk_hash:
+	/* DER header */
+	.byte 0x30, 0x31, 0x30, 0x0D, 0x06, 0x09, 0x60, 0x86, 0x48
+	.byte 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00, 0x04, 0x20
+	/* SHA256 */
+	.incbin ROTPK_HASH
+sq_rotpk_hash_end:
diff --git a/plat/socionext/synquacer/sq_spm.c b/plat/socionext/synquacer/sq_spm.c
new file mode 100644
index 0000000..7bea111
--- /dev/null
+++ b/plat/socionext/synquacer/sq_spm.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <bl31/ehf.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <services/spm_mm_partition.h>
+
+static const mmap_region_t plat_arm_secure_partition_mmap[] = {
+	PLAT_SQ_FLASH_MMAP,
+	PLAT_SQ_UART1_MMAP,
+	PLAT_SQ_PERIPH_MMAP,
+	PLAT_SQ_SP_IMAGE_MMAP,
+	PLAT_SP_IMAGE_NS_BUF_MMAP,
+	PLAT_SQ_SP_IMAGE_RW_MMAP,
+	PLAT_SPM_SPM_BUF_EL0_MMAP,
+	{0}
+};
+
+/*
+ * Boot information passed to a secure partition during initialisation. Linear
+ * indices in MP information will be filled at runtime.
+ */
+static spm_mm_mp_info_t sp_mp_info[] = {
+	{0x80000000, 0}, {0x80000001, 0}, {0x80000100, 0}, {0x80000101, 0},
+	{0x80000200, 0}, {0x80000201, 0}, {0x80000300, 0}, {0x80000301, 0},
+	{0x80000400, 0}, {0x80000401, 0}, {0x80000500, 0}, {0x80000501, 0},
+	{0x80000600, 0}, {0x80000601, 0}, {0x80000700, 0}, {0x80000701, 0},
+	{0x80000800, 0}, {0x80000801, 0}, {0x80000900, 0}, {0x80000901, 0},
+	{0x80000a00, 0}, {0x80000a01, 0}, {0x80000b00, 0}, {0x80000b01, 0},
+};
+
+const spm_mm_boot_info_t plat_arm_secure_partition_boot_info = {
+	.h.type			= PARAM_SP_IMAGE_BOOT_INFO,
+	.h.version		= VERSION_1,
+	.h.size			= sizeof(spm_mm_boot_info_t),
+	.h.attr			= 0,
+	.sp_mem_base		= BL32_BASE,
+	.sp_mem_limit		= BL32_LIMIT,
+	.sp_image_base		= BL32_BASE,
+	.sp_stack_base		= PLAT_SP_IMAGE_STACK_BASE,
+	.sp_heap_base		= PLAT_SQ_SP_HEAP_BASE,
+	.sp_ns_comm_buf_base	= PLAT_SP_IMAGE_NS_BUF_BASE,
+	.sp_shared_buf_base	= PLAT_SPM_BUF_BASE,
+	.sp_image_size		= PLAT_SQ_SP_IMAGE_SIZE,
+	.sp_pcpu_stack_size	= PLAT_SP_IMAGE_STACK_PCPU_SIZE,
+	.sp_heap_size		= PLAT_SQ_SP_HEAP_SIZE,
+	.sp_ns_comm_buf_size	= PLAT_SP_IMAGE_NS_BUF_SIZE,
+	.sp_shared_buf_size	= PLAT_SPM_BUF_SIZE,
+	.num_sp_mem_regions	= PLAT_SP_IMAGE_NUM_MEM_REGIONS,
+	.num_cpus		= PLATFORM_CORE_COUNT,
+	.mp_info		= sp_mp_info,
+};
+
+const struct mmap_region *plat_get_secure_partition_mmap(void *cookie)
+{
+	return plat_arm_secure_partition_mmap;
+}
+
+const struct spm_mm_boot_info *plat_get_secure_partition_boot_info(
+		void *cookie)
+{
+	return &plat_arm_secure_partition_boot_info;
+}
+
+static ehf_pri_desc_t sq_exceptions[] = {
+	EHF_PRI_DESC(PLAT_PRI_BITS, PLAT_SP_PRI),
+};
+EHF_REGISTER_PRIORITIES(sq_exceptions, ARRAY_SIZE(sq_exceptions), PLAT_PRI_BITS);
diff --git a/plat/socionext/synquacer/sq_tbbr.c b/plat/socionext/synquacer/sq_tbbr.c
new file mode 100644
index 0000000..e9fa18c
--- /dev/null
+++ b/plat/socionext/synquacer/sq_tbbr.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2022, Socionext Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat/common/platform.h>
+
+extern char sq_rotpk_hash[], sq_rotpk_hash_end[];
+
+int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
+			unsigned int *flags)
+{
+	*key_ptr = sq_rotpk_hash;
+	*key_len = sq_rotpk_hash_end - sq_rotpk_hash;
+	*flags = ROTPK_IS_HASH;
+
+	return 0;
+}
+
+int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr)
+{
+	/*
+	 * No support for non-volatile counter.  Update the ROT key to protect
+	 * the system against rollback.
+	 */
+	*nv_ctr = 0;
+
+	return 0;
+}
+
+int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr)
+{
+	return 0;
+}
+
+int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
+{
+	return get_mbedtls_heap_helper(heap_addr, heap_size);
+}
diff --git a/plat/socionext/synquacer/sq_topology.c b/plat/socionext/synquacer/sq_topology.c
new file mode 100644
index 0000000..359997a
--- /dev/null
+++ b/plat/socionext/synquacer/sq_topology.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <arch.h>
+
+#include <sq_common.h>
+
+unsigned char sq_pd_tree_desc[PLAT_CLUSTER_COUNT + 1];
+
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+	unsigned int cluster_id, cpu_id;
+
+	cluster_id = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
+	if (cluster_id >= PLAT_CLUSTER_COUNT)
+		return -1;
+
+	cpu_id = (mpidr >> MPIDR_AFF0_SHIFT) & MPIDR_AFFLVL_MASK;
+	if (cpu_id >= PLAT_MAX_CORES_PER_CLUSTER)
+		return -1;
+
+	return sq_calc_core_pos(mpidr);
+}
+
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	int i;
+
+	sq_pd_tree_desc[0] = PLAT_CLUSTER_COUNT;
+
+	for (i = 0; i < PLAT_CLUSTER_COUNT; i++)
+		sq_pd_tree_desc[i + 1] = PLAT_MAX_CORES_PER_CLUSTER;
+
+	return sq_pd_tree_desc;
+}
diff --git a/plat/socionext/synquacer/sq_xlat_setup.c b/plat/socionext/synquacer/sq_xlat_setup.c
new file mode 100644
index 0000000..5d1669d
--- /dev/null
+++ b/plat/socionext/synquacer/sq_xlat_setup.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <common/debug.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+
+#define SQ_REG_REGION_BASE	0x20000000ULL
+#define SQ_REG_REGION_SIZE	0x60000000ULL
+
+void sq_mmap_setup(uintptr_t total_base, size_t total_size,
+			 const struct mmap_region *mmap)
+{
+	VERBOSE("Trusted RAM seen by this BL image: %p - %p\n",
+		(void *)total_base, (void *)(total_base + total_size));
+	mmap_add_region(total_base, total_base,
+			total_size,
+			MT_NON_CACHEABLE | MT_RW | MT_SECURE);
+
+	/* remap the code section */
+	VERBOSE("Code region: %p - %p\n",
+		(void *)BL_CODE_BASE, (void *)BL_CODE_END);
+	mmap_add_region(BL_CODE_BASE, BL_CODE_BASE,
+			round_up(BL_CODE_END, PAGE_SIZE) - BL_CODE_BASE,
+			MT_NON_CACHEABLE | MT_RO | MT_SECURE);
+
+	/* Re-map the read-only data section */
+	VERBOSE("Read-only data region: %p - %p\n",
+		(void *)BL_RO_DATA_BASE, (void *)BL_RO_DATA_END);
+	mmap_add_region(BL_RO_DATA_BASE, BL_RO_DATA_BASE,
+			round_up(BL_RO_DATA_END, PAGE_SIZE) - BL_RO_DATA_BASE,
+			(MT_NON_CACHEABLE | MT_RO | MT_EXECUTE_NEVER |
+			 MT_SECURE));
+
+	/* remap the coherent memory region */
+	VERBOSE("Coherent region: %p - %p\n",
+		(void *)BL_COHERENT_RAM_BASE, (void *)BL_COHERENT_RAM_END);
+	mmap_add_region(BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_BASE,
+			BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
+			MT_DEVICE | MT_RW | MT_SECURE);
+
+	/* register region */
+	mmap_add_region(SQ_REG_REGION_BASE, SQ_REG_REGION_BASE,
+			SQ_REG_REGION_SIZE,
+			MT_DEVICE | MT_RW | MT_SECURE);
+
+	/* additional regions if needed */
+	if (mmap)
+		mmap_add(mmap);
+
+	init_xlat_tables();
+}