Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

16 files changed, 1826 insertions, 0 deletions

diff --git a/tools/nxp/cert_create_helper/cert_create_tbbr.mk b/tools/nxp/cert_create_helper/cert_create_tbbr.mk
new file mode 100644
index 0000000..e3b2e91
--- /dev/null
+++ b/tools/nxp/cert_create_helper/cert_create_tbbr.mk
@@ -0,0 +1,31 @@
+#
+# Copyright 2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Compile time defines used by NXP platforms
+
+PLAT_DEF_OID := yes
+
+ifeq (${PLAT_DEF_OID},yes)
+
+$(eval $(call add_define, PLAT_DEF_OID))
+$(eval $(call add_define, PDEF_KEYS))
+$(eval $(call add_define, PDEF_CERTS))
+$(eval $(call add_define, PDEF_EXTS))
+
+
+INC_DIR += -I../../plat/nxp/common/fip_handler/common/
+
+PDEF_CERT_TOOL_PATH		:=	../nxp/cert_create_helper
+PLAT_INCLUDE			+=	-I${PDEF_CERT_TOOL_PATH}/include
+
+PLAT_OBJECTS			+=	${PDEF_CERT_TOOL_PATH}/src/pdef_tbb_cert.o \
+					${PDEF_CERT_TOOL_PATH}/src/pdef_tbb_ext.o \
+					${PDEF_CERT_TOOL_PATH}/src/pdef_tbb_key.o
+
+$(shell rm ${PLAT_OBJECTS})
+
+OBJECTS				+= ${PLAT_OBJECTS}
+endif
diff --git a/tools/nxp/cert_create_helper/include/pdef_tbb_cert.h b/tools/nxp/cert_create_helper/include/pdef_tbb_cert.h
new file mode 100644
index 0000000..f185619
--- /dev/null
+++ b/tools/nxp/cert_create_helper/include/pdef_tbb_cert.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PDEF_TBB_CERT_H
+#define PDEF_TBB_CERT_H
+
+#include <tbbr/tbb_cert.h>
+
+/*
+ * Enumerate the certificates that are used to establish the chain of trust
+ */
+enum {
+	DDR_FW_KEY_CERT = FWU_CERT + 1,
+	DDR_UDIMM_FW_CONTENT_CERT,
+	DDR_RDIMM_FW_CONTENT_CERT
+};
+
+#endif /* PDEF_TBB_CERT_H */
diff --git a/tools/nxp/cert_create_helper/include/pdef_tbb_ext.h b/tools/nxp/cert_create_helper/include/pdef_tbb_ext.h
new file mode 100644
index 0000000..5fb349c
--- /dev/null
+++ b/tools/nxp/cert_create_helper/include/pdef_tbb_ext.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PDEF_TBB_EXT_H
+#define PDEF_TBB_EXT_H
+
+#include <tbbr/tbb_ext.h>
+
+/* Plat Defined TBBR extensions */
+enum {
+	DDR_FW_CONTENT_CERT_PK_EXT = FWU_HASH_EXT + 1,
+	DDR_IMEM_UDIMM_1D_HASH_EXT,
+	DDR_IMEM_UDIMM_2D_HASH_EXT,
+	DDR_DMEM_UDIMM_1D_HASH_EXT,
+	DDR_DMEM_UDIMM_2D_HASH_EXT,
+	DDR_IMEM_RDIMM_1D_HASH_EXT,
+	DDR_IMEM_RDIMM_2D_HASH_EXT,
+	DDR_DMEM_RDIMM_1D_HASH_EXT,
+	DDR_DMEM_RDIMM_2D_HASH_EXT
+};
+
+#endif /* PDEF_TBB_EXT_H */
diff --git a/tools/nxp/cert_create_helper/include/pdef_tbb_key.h b/tools/nxp/cert_create_helper/include/pdef_tbb_key.h
new file mode 100644
index 0000000..b26b651
--- /dev/null
+++ b/tools/nxp/cert_create_helper/include/pdef_tbb_key.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PDEF_TBB_KEY_H
+#define PDEF_TBB_KEY_H
+
+#include <tbbr/tbb_key.h>
+
+/*
+ * Enumerate the pltform defined keys that are used to establish the chain of trust
+ */
+enum {
+	DDR_FW_CONTENT_KEY = NON_TRUSTED_FW_CONTENT_CERT_KEY + 1,
+};
+#endif /* PDEF_TBB_KEY_H */
diff --git a/tools/nxp/cert_create_helper/src/pdef_tbb_cert.c b/tools/nxp/cert_create_helper/src/pdef_tbb_cert.c
new file mode 100644
index 0000000..40bd928
--- /dev/null
+++ b/tools/nxp/cert_create_helper/src/pdef_tbb_cert.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <pdef_tbb_cert.h>
+#include <pdef_tbb_ext.h>
+#include <pdef_tbb_key.h>
+
+static cert_t pdef_tbb_certs[] = {
+	[DDR_FW_KEY_CERT - DDR_FW_KEY_CERT] = {
+		.id = DDR_FW_KEY_CERT,
+		.opt = "ddr-fw-key-cert",
+		.help_msg = "DDR Firmware Key Certificate (output file)",
+		.fn = NULL,
+		.cn = "DDR Firmware Key Certificate",
+		.key = TRUSTED_WORLD_KEY,
+		.issuer = DDR_FW_KEY_CERT,
+		.ext = {
+			TRUSTED_FW_NVCOUNTER_EXT,
+			DDR_FW_CONTENT_CERT_PK_EXT,
+		},
+		.num_ext = 2
+	},
+	[DDR_UDIMM_FW_CONTENT_CERT - DDR_FW_KEY_CERT] = {
+		.id = DDR_UDIMM_FW_CONTENT_CERT,
+		.opt = "ddr-udimm-fw-cert",
+		.help_msg = "DDR UDIMM Firmware Content Certificate (output file)",
+		.fn = NULL,
+		.cn = "DDR UDIMM Firmware Content Certificate",
+		.key = DDR_FW_CONTENT_KEY,
+		.issuer = DDR_UDIMM_FW_CONTENT_CERT,
+		.ext = {
+			TRUSTED_FW_NVCOUNTER_EXT,
+			DDR_IMEM_UDIMM_1D_HASH_EXT,
+			DDR_IMEM_UDIMM_2D_HASH_EXT,
+			DDR_DMEM_UDIMM_1D_HASH_EXT,
+			DDR_DMEM_UDIMM_2D_HASH_EXT,
+		},
+		.num_ext = 5
+	},
+	[DDR_RDIMM_FW_CONTENT_CERT - DDR_FW_KEY_CERT] = {
+		.id = DDR_RDIMM_FW_CONTENT_CERT,
+		.opt = "ddr-rdimm-fw-cert",
+		.help_msg = "DDR RDIMM Firmware Content Certificate (output file)",
+		.fn = NULL,
+		.cn = "DDR RDIMM Firmware Content Certificate",
+		.key = DDR_FW_CONTENT_KEY,
+		.issuer = DDR_RDIMM_FW_CONTENT_CERT,
+		.ext = {
+			TRUSTED_FW_NVCOUNTER_EXT,
+			DDR_IMEM_RDIMM_1D_HASH_EXT,
+			DDR_IMEM_RDIMM_2D_HASH_EXT,
+			DDR_DMEM_RDIMM_1D_HASH_EXT,
+			DDR_DMEM_RDIMM_2D_HASH_EXT,
+		},
+		.num_ext = 5
+	}
+};
+
+PLAT_REGISTER_COT(pdef_tbb_certs);
diff --git a/tools/nxp/cert_create_helper/src/pdef_tbb_ext.c b/tools/nxp/cert_create_helper/src/pdef_tbb_ext.c
new file mode 100644
index 0000000..f6da6dd
--- /dev/null
+++ b/tools/nxp/cert_create_helper/src/pdef_tbb_ext.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <openssl/err.h>
+#include <openssl/x509v3.h>
+
+#if USE_TBBR_DEFS
+#include <tbbr_oid.h>
+#else
+#include <platform_oid.h>
+#endif
+
+#include "ext.h"
+#include "tbbr/tbb_ext.h"
+#include "tbbr/tbb_key.h"
+
+#include <pdef_tbb_ext.h>
+#include <pdef_tbb_key.h>
+
+static ext_t pdef_tbb_ext[] = {
+	[DDR_FW_CONTENT_CERT_PK_EXT - DDR_FW_CONTENT_CERT_PK_EXT] = {
+		.oid = DDR_FW_CONTENT_CERT_PK_OID,
+		.sn = "DDR FirmwareContentCertPK",
+		.ln = "DDR Firmware content certificate public key",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_PKEY,
+		.attr.key = DDR_FW_CONTENT_KEY
+	},
+	[DDR_IMEM_UDIMM_1D_HASH_EXT - DDR_FW_CONTENT_CERT_PK_EXT] = {
+		.oid = DDR_IMEM_UDIMM_1D_HASH_OID,
+		.opt = "ddr-immem-udimm-1d",
+		.help_msg = "DDR Firmware IMEM UDIMM 1D image file",
+		.sn = "DDR UDIMM IMEM 1D FirmwareHash",
+		.ln = "DDR UDIMM IMEM 1D Firmware hash (SHA256)",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_HASH
+	},
+	[DDR_IMEM_UDIMM_2D_HASH_EXT - DDR_FW_CONTENT_CERT_PK_EXT] = {
+		.oid = DDR_IMEM_UDIMM_2D_HASH_OID,
+		.opt = "ddr-immem-udimm-2d",
+		.help_msg = "DDR Firmware IMEM UDIMM 2D image file",
+		.sn = "DDR UDIMM IMEM 2D FirmwareHash",
+		.ln = "DDR UDIMM IMEM 2D Firmware hash (SHA256)",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_HASH
+	},
+	[DDR_DMEM_UDIMM_1D_HASH_EXT - DDR_FW_CONTENT_CERT_PK_EXT] = {
+		.oid = DDR_DMEM_UDIMM_1D_HASH_OID,
+		.opt = "ddr-dmmem-udimm-1d",
+		.help_msg = "DDR Firmware DMEM UDIMM 1D image file",
+		.sn = "DDR UDIMM DMEM 1D FirmwareHash",
+		.ln = "DDR UDIMM DMEM 1D Firmware hash (SHA256)",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_HASH
+	},
+	[DDR_DMEM_UDIMM_2D_HASH_EXT - DDR_FW_CONTENT_CERT_PK_EXT] = {
+		.oid = DDR_DMEM_UDIMM_2D_HASH_OID,
+		.opt = "ddr-dmmem-udimm-2d",
+		.help_msg = "DDR Firmware DMEM UDIMM 2D image file",
+		.sn = "DDR UDIMM DMEM 2D FirmwareHash",
+		.ln = "DDR UDIMM DMEM 2D Firmware hash (SHA256)",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_HASH
+	},
+	[DDR_IMEM_RDIMM_1D_HASH_EXT - DDR_FW_CONTENT_CERT_PK_EXT] = {
+		.oid = DDR_IMEM_RDIMM_1D_HASH_OID,
+		.opt = "ddr-immem-rdimm-1d",
+		.help_msg = "DDR Firmware IMEM RDIMM 1D image file",
+		.sn = "DDR RDIMM IMEM 1D FirmwareHash",
+		.ln = "DDR RDIMM IMEM 1D Firmware hash (SHA256)",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_HASH
+	},
+	[DDR_IMEM_RDIMM_2D_HASH_EXT - DDR_FW_CONTENT_CERT_PK_EXT] = {
+		.oid = DDR_IMEM_RDIMM_2D_HASH_OID,
+		.opt = "ddr-immem-rdimm-2d",
+		.help_msg = "DDR Firmware IMEM RDIMM 2D image file",
+		.sn = "DDR RDIMM IMEM 2D FirmwareHash",
+		.ln = "DDR RDIMM IMEM 2D Firmware hash (SHA256)",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_HASH
+	},
+	[DDR_DMEM_RDIMM_1D_HASH_EXT - DDR_FW_CONTENT_CERT_PK_EXT] = {
+		.oid = DDR_DMEM_RDIMM_1D_HASH_OID,
+		.opt = "ddr-dmmem-rdimm-1d",
+		.help_msg = "DDR Firmware DMEM RDIMM 1D image file",
+		.sn = "DDR RDIMM DMEM 1D FirmwareHash",
+		.ln = "DDR RDIMM DMEM 1D Firmware hash (SHA256)",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_HASH
+	},
+	[DDR_DMEM_RDIMM_2D_HASH_EXT - DDR_FW_CONTENT_CERT_PK_EXT] = {
+		.oid = DDR_DMEM_RDIMM_2D_HASH_OID,
+		.opt = "ddr-dmmem-rdimm-2d",
+		.help_msg = "DDR Firmware DMEM RDIMM 2D image file",
+		.sn = "DDR RDIMM DMEM 2D FirmwareHash",
+		.ln = "DDR RDIMM DMEM 2D Firmware hash (SHA256)",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_HASH
+	}
+};
+
+PLAT_REGISTER_EXTENSIONS(pdef_tbb_ext);
diff --git a/tools/nxp/cert_create_helper/src/pdef_tbb_key.c b/tools/nxp/cert_create_helper/src/pdef_tbb_key.c
new file mode 100644
index 0000000..cf2ebda
--- /dev/null
+++ b/tools/nxp/cert_create_helper/src/pdef_tbb_key.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <pdef_tbb_key.h>
+
+static key_t pdef_tbb_keys[] = {
+	[DDR_FW_CONTENT_KEY - DDR_FW_CONTENT_KEY] = {
+		.id = DDR_FW_CONTENT_KEY,
+		.opt = "ddr-fw-key",
+		.help_msg = "DDR Firmware Content Certificate key (input/output file)",
+		.desc = "DDR Firmware Content Certificate key"
+	}
+};
+
+PLAT_REGISTER_KEYS(pdef_tbb_keys);
diff --git a/tools/nxp/create_pbl/Makefile b/tools/nxp/create_pbl/Makefile
new file mode 100644
index 0000000..f971a74
--- /dev/null
+++ b/tools/nxp/create_pbl/Makefile
@@ -0,0 +1,61 @@
+#
+# Copyright 2018-2020 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+MAKE_HELPERS_DIRECTORY := ../../../make_helpers/
+include ${MAKE_HELPERS_DIRECTORY}build_macros.mk
+include ${MAKE_HELPERS_DIRECTORY}build_env.mk
+
+PROJECT_1 := create_pbl${BIN_EXT}
+OBJECTS_1 := create_pbl.o
+PROJECT_2 := byte_swap${BIN_EXT}
+OBJECTS_2 := byte_swap.o
+V ?= 0
+
+override CPPFLAGS += -D_GNU_SOURCE -D_XOPEN_SOURCE=700
+CFLAGS := -Wall -Werror -pedantic -std=c99
+ifeq (${DEBUG},1)
+  CFLAGS += -g -O0 -DDEBUG
+else
+  CFLAGS += -O2
+endif
+LDLIBS :=
+
+ifeq (${V},0)
+  Q := @
+else
+  Q :=
+endif
+
+INCLUDE_PATHS :=
+
+HOSTCC ?= gcc
+CC = gcc
+
+.PHONY: all clean distclean
+
+all: create_pbl byte_swap
+
+${PROJECT_1}: ${OBJECTS_1} Makefile
+	@echo "  LD      $@"
+	${Q}${HOSTCC} ${OBJECTS_1} -o $@ ${LDLIBS}
+	@${ECHO_BLANK_LINE}
+	@echo "Built $@ successfully"
+	@${ECHO_BLANK_LINE}
+
+${PROJECT_2}: ${OBJECTS_2} Makefile
+	@echo "  LD      $@"
+	${Q}${HOSTCC} ${OBJECTS_2} -o $@ ${LDLIBS}
+	@${ECHO_BLANK_LINE}
+	@echo "Built $@ successfully"
+	@${ECHO_BLANK_LINE}
+
+%.o: %.c %.h Makefile
+	@echo "  CC      $<"
+	${Q}${HOSTCC} -c ${CPPFLAGS} ${CFLAGS} ${INCLUDE_PATHS} $< -o $@
+
+clean:
+	$(call SHELL_DELETE_ALL, ${PROJECT_1} ${OBJECTS_1})
+	$(call SHELL_DELETE_ALL, ${PROJECT_2} ${OBJECTS_2})
diff --git a/tools/nxp/create_pbl/README b/tools/nxp/create_pbl/README
new file mode 100644
index 0000000..3b6f854
--- /dev/null
+++ b/tools/nxp/create_pbl/README
@@ -0,0 +1,65 @@
+Description:
+------------
+Tool 'create_pbl' is a standalone tool to create the PBL images.
+	 where,
+	     On the basis of Chassis,
+	     RCW image is placed first followed by the,
+	     PBI commands to copy the,
+	     Input BL2 image stored on the,
+	     Specified boot source (QSPI or SD or NOR) to the,
+             Specified destination address.
+
+
+Usage in standalone way:
+-----------------------
+
+./create_pbl [options] (mentioned below):
+
+	-r  <RCW file-name>         - name of RCW binary file.
+	-i  <BL2 Bin file-name>     - file to be added to rcw file.
+	-c  <SoC Number>            - SoC numeric identifier, may be one of
+                                  1012,1023,1026.1028,
+                                  1043,1046,1088,2080,
+                                  2088,2160
+	-b  <boot source id>        - Boot source id string, may be one of
+                                  "qspi", "nor", "nand", "sd", "emmc"
+	-d  <Address>               - Destination address where BL2
+	                              image is to be copied
+	-o  <output filename>	    - Name of PBL image generated
+	                              as an output of the tool.
+	-e  <Address>               - [Optional] Entry Point Address
+	                              of the BL2.bin
+	-f  <Address>               - BL2 image offset
+	                              on Boot Source for block copy.
+	                              command for chassis >=3.)
+				      (Must for Ch3, Ignored for Ch2)
+	-h  Help.
+	-s  Secure boot.
+
+		-s 	secure boot
+		-c	SoC Number (see description above)
+		-b	Boot source.
+		-r	RCW binary file.
+		-i	Input file that is to be added to rcw file.
+		-o	Name of output file
+		-f	Source Offset (Block Copy)
+		-d	Destination address to which file has to be copied
+		-h	Help.
+
+Example:
+	./create_pbl -r <RCW file> -i <bl2.bin> -c <chassis_no> -b <boot_source = sd/qspi/nor> -d <Destination_Addr> -o <pbl_image_name>
+
+
+
+Usage at compilation time:
+--------------------------------
+
+	make <compilation command......> pbl RCW=<Path_to_RCW_File>/<rcw_file_name.bin>
+
+Example: QSPI Boot For LS1046ARDB-
+
+	make PLAT=ls1046rdb all fip BOOT_MODE=qspi SPD=opteed BL32=tee.bin BL33=u-boot-ls1046.bin pbl RCW=/home/pankaj/flexbuild/packages/firmware/dash-rcw/ls1046ardb/RR_FFSSPPPN_1133_5506/rcw_1600_qspiboot.bin
+
+Example: QSPI Boot For LX2160ARDB-
+
+	make PLAT=lx2160ardb all fip BOOT_MODE=flexspi_nor SPD=opteed BL32=tee_lx2.bin BL33=u-boot_lx2160.bin pbl RCW=plat/nxp/soc-lx2160/lx2160ardb/rcw_1900_600_1600_19_5_2.bin
diff --git a/tools/nxp/create_pbl/byte_swap.c b/tools/nxp/create_pbl/byte_swap.c
new file mode 100644
index 0000000..1d0bfce
--- /dev/null
+++ b/tools/nxp/create_pbl/byte_swap.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <getopt.h>
+#include <unistd.h>
+
+#define NUM_MEM_BLOCK		1
+#define FOUR_BYTE_ALIGN		4
+#define EIGHT_BYTE_ALIGN	8
+#define SIZE_TWO_PBL_CMD	24
+
+#define SUCCESS			 0
+#define FAILURE			-1
+#define BYTE_SWAP_32(word)	((((word) & 0xff000000) >> 24)|	\
+				(((word) & 0x00ff0000) >>  8) |	\
+				(((word) & 0x0000ff00) <<  8) |	\
+				(((word) & 0x000000ff) << 24))
+
+
+/*
+ * Returns:
+ *     SUCCESS, on successful byte swapping.
+ *     FAILURE, on failure.
+ */
+int do_byteswap(FILE *fp)
+{
+	int bytes = 0;
+	uint32_t  upper_byte;
+	uint32_t  lower_byte;
+	uint32_t  pad = 0U;
+	/* Carries number of Padding bytes to be appended to
+	 * make file size 8 byte aligned.
+	 */
+	int append_bytes;
+	int ret = FAILURE;
+
+	fseek(fp, 0L, SEEK_END);
+	bytes = ftell(fp);
+
+	append_bytes = EIGHT_BYTE_ALIGN - (bytes % EIGHT_BYTE_ALIGN);
+	if (append_bytes != 0) {
+		if (fwrite(&pad, append_bytes, NUM_MEM_BLOCK, fp)
+			!= NUM_MEM_BLOCK) {
+			printf("%s: Error in appending padding bytes.\n",
+				__func__);
+			goto byteswap_err;
+		}
+		bytes += append_bytes;
+	}
+
+	rewind(fp);
+	while (bytes > 0) {
+		if ((fread(&upper_byte, sizeof(upper_byte), NUM_MEM_BLOCK, fp)
+			!= NUM_MEM_BLOCK) && (feof(fp) == 0)) {
+			printf("%s: Error reading upper bytes.\n", __func__);
+			goto byteswap_err;
+		}
+		if ((fread(&lower_byte, sizeof(lower_byte), NUM_MEM_BLOCK, fp)
+			!= NUM_MEM_BLOCK) && (feof(fp) == 0)) {
+			printf("%s: Error reading lower bytes.\n", __func__);
+			goto byteswap_err;
+		}
+		fseek(fp, -8L, SEEK_CUR);
+		upper_byte = BYTE_SWAP_32(upper_byte);
+		lower_byte = BYTE_SWAP_32(lower_byte);
+		if (fwrite(&lower_byte, sizeof(lower_byte), NUM_MEM_BLOCK, fp)
+			!= NUM_MEM_BLOCK) {
+			printf("%s: Error writing lower bytes.\n", __func__);
+			goto byteswap_err;
+		}
+		if (fwrite(&upper_byte, sizeof(upper_byte), NUM_MEM_BLOCK, fp)
+			!= NUM_MEM_BLOCK) {
+			printf("%s: Error writing upper bytes.\n", __func__);
+			goto byteswap_err;
+		}
+		bytes -= EIGHT_BYTE_ALIGN;
+	}
+	ret = SUCCESS;
+
+byteswap_err:
+	return ret;
+}
+
+int main(int argc, char **argv)
+{
+	FILE *fp = NULL;
+	int ret = 0;
+
+	if (argc > 2) {
+		printf("Usage format is byteswap <filename>");
+		return -1;
+	}
+
+	fp = fopen(argv[1], "rb+");
+	if (fp == NULL) {
+		printf("%s: Error opening the input file: %s\n",
+			__func__, argv[1]);
+		return -1;
+	}
+
+	ret = do_byteswap(fp);
+	fclose(fp);
+	return ret;
+}
diff --git a/tools/nxp/create_pbl/create_pbl.c b/tools/nxp/create_pbl/create_pbl.c
new file mode 100644
index 0000000..9457a00
--- /dev/null
+++ b/tools/nxp/create_pbl/create_pbl.c
@@ -0,0 +1,998 @@
+/*
+ * Copyright 2021-2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <getopt.h>
+#include <unistd.h>
+
+#define NUM_MEM_BLOCK		1
+#define FOUR_BYTE_ALIGN		4
+#define EIGHT_BYTE_ALIGN	8
+#define SIZE_TWO_PBL_CMD	24
+
+/* Define for add_boot_ptr_cmd() */
+#define BOOTPTR_ADDR 0x09570604
+#define CSF_ADDR_SB 0x09ee0200
+/* CCSR write command to address 0x1e00400 i.e BOOTLOCPTR */
+#define BOOTPTR_ADDR_CH3 0x31e00400
+/* Load CSF header command */
+#define CSF_ADDR_SB_CH3 0x80220000
+
+#define	MAND_ARG_MASK				0xFFF3
+#define	ARG_INIT_MASK				0xFF00
+#define RCW_FILE_NAME_ARG_MASK			0x0080
+#define IN_FILE_NAME_ARG_MASK			0x0040
+#define CHASSIS_ARG_MASK			0x0020
+#define BOOT_SRC_ARG_MASK			0x0010
+#define ENTRY_POINT_ADDR_ARG_MASK		0x0008
+#define BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK	0x0004
+#define BL2_BIN_CPY_DEST_ADDR_ARG_MASK		0x0002
+#define OP_FILE_NAME_ARG_MASK			0x0001
+
+/* Define for add_cpy_cmd() */
+#define OFFSET_MASK		        0x00ffffff
+#define WRITE_CMD_BASE		    0x81000000
+#define MAX_PBI_DATA_LEN_BYTE	64
+
+/* 140 Bytes = Preamble + LOAD RCW command + RCW (128 bytes) + Checksum */
+#define CHS3_CRC_PAYLOAD_START_OFFSET 140
+
+#define PBI_CRC_POLYNOMIAL	0x04c11db7
+
+typedef enum {
+	CHASSIS_UNKNOWN,
+	CHASSIS_2,
+	CHASSIS_3,
+	CHASSIS_3_2,
+	CHASSIS_MAX    /* must be last item in list */
+} chassis_t;
+
+typedef enum {
+	UNKNOWN_BOOT = 0,
+	IFC_NOR_BOOT,
+	IFC_NAND_BOOT,
+	QSPI_BOOT,
+	SD_BOOT,
+	EMMC_BOOT,
+	FLXSPI_NOR_BOOT,
+	FLXSPI_NAND_BOOT,
+	FLXSPI_NAND4K_BOOT,
+	MAX_BOOT    /* must be last item in list */
+} boot_src_t;
+
+/* Base Addresses where PBL image is copied depending on the boot source.
+ * Boot address map varies as per Chassis architecture.
+ */
+#define BASE_ADDR_UNDEFINED  0xFFFFFFFF
+#define BASE_ADDR_QSPI       0x20000000
+#define BASE_ADDR_SD         0x00001000
+#define BASE_ADDR_IFC_NOR    0x30000000
+#define BASE_ADDR_EMMC       0x00001000
+#define BASE_ADDR_FLX_NOR    0x20000000
+#define BASE_ADDR_NAND       0x20000000
+
+uint32_t base_addr_ch3[MAX_BOOT] = {
+	BASE_ADDR_UNDEFINED,
+	BASE_ADDR_IFC_NOR,
+	BASE_ADDR_UNDEFINED,	/*IFC NAND */
+	BASE_ADDR_QSPI,
+	BASE_ADDR_SD,
+	BASE_ADDR_EMMC,
+	BASE_ADDR_UNDEFINED,	/*FLXSPI NOR */
+	BASE_ADDR_UNDEFINED,	/*FLXSPI NAND 2K */
+	BASE_ADDR_UNDEFINED	/*FLXSPI NAND 4K */
+};
+
+uint32_t base_addr_ch32[MAX_BOOT] = {
+	BASE_ADDR_UNDEFINED,
+	BASE_ADDR_UNDEFINED,	/* IFC NOR */
+	BASE_ADDR_UNDEFINED,	/* IFC NAND */
+	BASE_ADDR_UNDEFINED,	/* QSPI */
+	BASE_ADDR_SD,
+	BASE_ADDR_EMMC,
+	BASE_ADDR_FLX_NOR,
+	BASE_ADDR_UNDEFINED,	/*FLXSPI NAND 2K */
+	BASE_ADDR_UNDEFINED	/*FLXSPI NAND 4K */
+};
+
+/* for Chassis 3 */
+uint32_t blk_cpy_hdr_map_ch3[] = {
+
+	0,		    /* Unknown Boot Source */
+	0x80000020,	/* NOR_BOOT */
+	0x0,		/* NAND_BOOT */
+	0x80000062,	/* QSPI_BOOT */
+	0x80000040,	/* SD_BOOT */
+	0x80000041,	/* EMMC_BOOT */
+	0x0,		/* FLEXSPI NOR_BOOT */
+	0x0,	/* FLEX SPI NAND2K BOOT */
+	0x0,	/* CHASIS3_2_NAND4K_BOOT */
+};
+
+uint32_t blk_cpy_hdr_map_ch32[] = {
+	0,		    /* Unknown Boot Source */
+	0x0,		/* NOR_BOOT */
+	0x0,		/* NAND_BOOT */
+	0x0,		/* QSPI_BOOT */
+	0x80000008,	/* SD_BOOT */
+	0x80000009,	/* EMMC_BOOT */
+	0x8000000F,	/* FLEXSPI NOR_BOOT */
+	0x8000000C,	/* FLEX SPI NAND2K BOOT */
+	0x8000000D,	/* CHASIS3_2_NAND4K_BOOT */
+};
+
+char *boot_src_string[] = {
+	"UNKNOWN_BOOT",
+	"IFC_NOR_BOOT",
+	"IFC_NAND_BOOT",
+	"QSPI_BOOT",
+	"SD_BOOT",
+	"EMMC_BOOT",
+	"FLXSPI_NOR_BOOT",
+	"FLXSPI_NAND_BOOT",
+	"FLXSPI_NAND4K_BOOT",
+};
+
+enum stop_command {
+	STOP_COMMAND = 0,
+	CRC_STOP_COMMAND
+};
+
+/* Structure will get populated in the main function
+ * as part of parsing the command line arguments.
+ * All member parameters are mandatory except:
+ *	-ep
+ *	-src_addr
+ */
+struct pbl_image {
+	char *rcw_nm;		/* Input RCW File */
+	char *sec_imgnm;	/* Input BL2 binary */
+	char *imagefile;	/* Generated output file */
+	boot_src_t boot_src;	/* Boot Source - QSPI, SD, NOR, NAND etc */
+	uint32_t src_addr;	/* Source Address */
+	uint32_t addr;		/* Load address */
+	uint32_t ep;		/* Entry point <opt> default is load address */
+	chassis_t chassis;	/* Chassis type */
+} pblimg;
+
+#define SUCCESS			 0
+#define FAILURE			-1
+#define CRC_STOP_CMD_ARM	0x08610040
+#define CRC_STOP_CMD_ARM_CH3	0x808f0000
+#define STOP_CMD_ARM_CH3	0x80ff0000
+#define BYTE_SWAP_32(word)	((((word) & 0xff000000) >> 24)|	\
+				(((word) & 0x00ff0000) >>  8) |	\
+				(((word) & 0x0000ff00) <<  8) |	\
+				(((word) & 0x000000ff) << 24))
+
+#define PBI_LEN_MASK	0xFFF00000
+#define PBI_LEN_SHIFT	20
+#define NUM_RCW_WORD	35
+#define PBI_LEN_ADD		6
+
+#define MAX_CRC_ENTRIES 256
+
+/* SoC numeric identifier */
+#define SOC_LS1012 1012
+#define SOC_LS1023 1023
+#define SOC_LS1026 1026
+#define SOC_LS1028 1028
+#define SOC_LS1043 1043
+#define SOC_LS1046 1046
+#define SOC_LS1088 1088
+#define SOC_LS2080 2080
+#define SOC_LS2088 2088
+#define SOC_LX2160 2160
+
+static uint32_t pbl_size;
+bool sb_flag;
+
+/***************************************************************************
+ * Description	:	CRC32 Lookup Table
+ ***************************************************************************/
+static uint32_t crc32_lookup[] = {
+	 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
+	 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
+	 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
+	 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
+	 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
+	 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
+	 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
+	 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
+	 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
+	 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
+	 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
+	 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
+	 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
+	 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
+	 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
+	 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
+	 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
+	 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
+	 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
+	 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
+	 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
+	 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
+	 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
+	 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
+	 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
+	 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
+	 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
+	 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
+	 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
+	 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
+	 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
+	 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
+	 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
+	 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
+	 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
+	 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
+	 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
+	 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
+	 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
+	 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
+	 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
+	 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
+	 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
+	 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
+	 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
+	 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
+	 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
+	 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
+	 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
+	 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
+	 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
+	 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
+	 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
+	 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
+	 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
+	 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
+	 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
+	 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
+	 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
+	 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
+	 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
+	 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
+	 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
+	 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
+	};
+
+
+static void print_usage(void)
+{
+	printf("\nCorrect Usage of Tool is:\n");
+	printf("\n ./create_pbl [options] (mentioned below):\n\n");
+	printf("\t-r  <RCW file-name>     - name of RCW binary file.\n");
+	printf("\t-i  <BL2 Bin file-name> - file to be added to rcw file.\n");
+	printf("\t-c  <Number>            - Chassis Architecture (=2 or =3\n");
+	printf("\t                          or =4 for 3.2).\n");
+	printf("\t-b  <qspi/nor/nand/sd>  - Boot source.\n");
+	printf("\t-d  <Address>           - Destination address where BL2\n");
+	printf("\t                          image is to be copied\n");
+	printf("\t-o  <output filename>	  - Name of PBL image generated\n");
+	printf("\t                          as an output of the tool.\n");
+	printf("\t-f  <Address>           - BL2 image Src Offset\n");
+	printf("\t                          on Boot Source for block copy.\n");
+	printf("\t                          command for chassis >=3.)\n");
+	printf("\t-e  <Address>           - [Optional] Entry Point Address\n");
+	printf("\t                          of the BL2.bin\n");
+	printf("\t-s  Secure Boot.\n");
+	printf("\t-h  Help.\n");
+	printf("\n\n");
+	exit(0);
+
+}
+
+/***************************************************************************
+ * Function	:	crypto_calculate_checksum()
+ * Arguments	:	data - Pointer to FILE
+ *			num - Number of 32 bit words for checksum
+ * Return	:	Checksum Value
+ * Description	:	Calculate Checksum over the data
+ ***************************************************************************/
+uint32_t crypto_calculate_checksum(FILE *fp_rcw_pbi_op, uint32_t num)
+{
+	uint32_t i;
+	uint64_t sum = 0;
+	uint32_t word;
+
+	fseek(fp_rcw_pbi_op, 0L, SEEK_SET);
+	for (i = 0; i < num ; i++) {
+		if ((fread(&word, sizeof(word), NUM_MEM_BLOCK, fp_rcw_pbi_op))
+			< NUM_MEM_BLOCK) {
+			printf("%s: Error reading word.\n", __func__);
+			return FAILURE;
+		}
+		sum = sum + word;
+		sum = sum & 0xFFFFFFFF;
+	}
+	return (uint32_t)sum;
+}
+
+/***************************************************************************
+ * Function	:	add_pbi_stop_cmd
+ * Arguments	:	fp_rcw_pbi_op - output rcw_pbi file pointer
+ * Return	:	SUCCESS or FAILURE
+ * Description	:	This function insert pbi stop command.
+ ***************************************************************************/
+int add_pbi_stop_cmd(FILE *fp_rcw_pbi_op, enum stop_command flag)
+{
+	int ret = FAILURE;
+	int32_t pbi_stop_cmd;
+	uint32_t pbi_crc = 0xffffffff, i, j, c;
+	uint32_t crc_table[MAX_CRC_ENTRIES];
+	uint8_t data;
+
+	switch (pblimg.chassis) {
+	case CHASSIS_2:
+		pbi_stop_cmd = BYTE_SWAP_32(CRC_STOP_CMD_ARM);
+		break;
+	case CHASSIS_3:
+	case CHASSIS_3_2:
+		/* Based on flag add the corresponsding cmd
+		 * -- stop cmd or stop with CRC cmd
+		 */
+		if (flag == CRC_STOP_COMMAND) {
+			pbi_stop_cmd = CRC_STOP_CMD_ARM_CH3;
+		} else {
+			pbi_stop_cmd = STOP_CMD_ARM_CH3;
+		}
+		break;
+	case CHASSIS_UNKNOWN:
+	case CHASSIS_MAX:
+	default:
+		printf("Internal Error: Invalid Chassis val = %d.\n",
+			pblimg.chassis);
+		goto pbi_stop_err;
+	}
+
+	if (fwrite(&pbi_stop_cmd, sizeof(pbi_stop_cmd), NUM_MEM_BLOCK,
+			fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+		printf("%s: Error in Writing PBI STOP CMD\n", __func__);
+		goto pbi_stop_err;
+	}
+
+	if (flag == CRC_STOP_COMMAND) {
+		for (i = 0; i < MAX_CRC_ENTRIES; i++) {
+			c = i << 24;
+			for (j = 0; j < 8; j++) {
+				c = (c & 0x80000000) ?
+					PBI_CRC_POLYNOMIAL ^ (c << 1) : c << 1;
+			}
+
+			crc_table[i] = c;
+		}
+	}
+
+	switch (pblimg.chassis) {
+	case CHASSIS_2:
+		/* Chassis 2: CRC is calculated on  RCW + PBL cmd.*/
+		fseek(fp_rcw_pbi_op, 0L, SEEK_SET);
+		break;
+	case CHASSIS_3:
+	case CHASSIS_3_2:
+		/* Chassis 3: CRC is calculated on  PBL cmd only. */
+		fseek(fp_rcw_pbi_op, CHS3_CRC_PAYLOAD_START_OFFSET, SEEK_SET);
+		break;
+	case CHASSIS_UNKNOWN:
+	case CHASSIS_MAX:
+		printf("%s: Unknown Chassis.\n", __func__);
+		goto pbi_stop_err;
+	}
+
+	while ((fread(&data, sizeof(data), NUM_MEM_BLOCK, fp_rcw_pbi_op))
+		== NUM_MEM_BLOCK) {
+		if (flag == CRC_STOP_COMMAND) {
+			if (pblimg.chassis == CHASSIS_2) {
+				pbi_crc = crc_table
+					  [((pbi_crc >> 24) ^ (data)) & 0xff] ^
+					  (pbi_crc << 8);
+			} else {
+				pbi_crc =  (pbi_crc >> 8) ^
+					   crc32_lookup[((pbi_crc) ^
+							   (data)) & 0xff];
+			}
+		}
+	}
+
+	switch (pblimg.chassis) {
+	case CHASSIS_2:
+		pbi_crc = BYTE_SWAP_32(pbi_crc);
+		break;
+	case CHASSIS_3:
+	case CHASSIS_3_2:
+		if (flag == CRC_STOP_COMMAND) {
+			pbi_crc = pbi_crc ^ 0xFFFFFFFF;
+		} else {
+			pbi_crc = 0x00000000;
+		}
+		break;
+	case CHASSIS_UNKNOWN:
+	case CHASSIS_MAX:
+		printf("%s: Unknown Chassis.\n", __func__);
+		goto pbi_stop_err;
+	}
+
+	if (fwrite(&pbi_crc, sizeof(pbi_crc), NUM_MEM_BLOCK, fp_rcw_pbi_op)
+		!= NUM_MEM_BLOCK) {
+		printf("%s: Error in Writing PBI PBI CRC\n", __func__);
+		goto pbi_stop_err;
+	}
+	ret = SUCCESS;
+
+pbi_stop_err:
+	return ret;
+}
+
+/*
+ * Returns:
+ *     File size in bytes, on Success.
+ *     FAILURE, on failure.
+ */
+int get_filesize(const char *c)
+{
+	FILE *fp;
+	int ret = FAILURE;
+
+	fp = fopen(c, "rb");
+	if (fp == NULL) {
+		fprintf(stderr, "%s: Error in opening the file: %s\n",
+			__func__, c);
+		goto filesize_err;
+	}
+
+	fseek(fp, 0L, SEEK_END);
+	ret = ftell(fp);
+	fclose(fp);
+
+filesize_err:
+	return ret;
+}
+
+/***************************************************************************
+ * Function	:	get_bootptr
+ * Arguments	:	fp_rcw_pbi_op - Pointer to output file
+ * Return	:	SUCCESS or FAILURE
+ * Description	:	Add bootptr pbi command to output file
+ ***************************************************************************/
+int add_boot_ptr_cmd(FILE *fp_rcw_pbi_op)
+{
+	uint32_t bootptr_addr;
+	int ret = FAILURE;
+
+	switch (pblimg.chassis) {
+	case CHASSIS_2:
+		if (sb_flag == true)
+			bootptr_addr = BYTE_SWAP_32(CSF_ADDR_SB);
+		else
+			bootptr_addr = BYTE_SWAP_32(BOOTPTR_ADDR);
+		pblimg.ep    = BYTE_SWAP_32(pblimg.ep);
+		break;
+	case CHASSIS_3:
+	case CHASSIS_3_2:
+		if (sb_flag == true)
+			bootptr_addr = CSF_ADDR_SB_CH3;
+		else
+			bootptr_addr = BOOTPTR_ADDR_CH3;
+		break;
+	case CHASSIS_UNKNOWN:
+	case CHASSIS_MAX:
+	default:
+		printf("Internal Error: Invalid Chassis val = %d.\n",
+			pblimg.chassis);
+		goto bootptr_err;
+	}
+
+	if (fwrite(&bootptr_addr, sizeof(bootptr_addr), NUM_MEM_BLOCK,
+		fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+		printf("%s: Error in Writing PBI Words:[%d].\n",
+			 __func__, ret);
+		goto bootptr_err;
+	}
+
+	if (pblimg.ep != 0) {
+		if (fwrite(&pblimg.ep, sizeof(pblimg.ep), NUM_MEM_BLOCK,
+			fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+			printf("%s: Error in Writing PBI Words\n", __func__);
+			goto bootptr_err;
+		}
+	}
+
+	printf("\nBoot Location Pointer= 0x%x\n",
+	       pblimg.chassis == CHASSIS_2 ? BYTE_SWAP_32(pblimg.ep) :
+	       pblimg.ep);
+	ret = SUCCESS;
+
+bootptr_err:
+	return ret;
+}
+
+/***************************************************************************
+ * Function	:	add_blk_cpy_cmd
+ * Arguments	:	pbi_word - pointer to pbi commands
+ *			args - Command  line args flag.
+ * Return	:	SUCCESS or FAILURE
+ * Description	:	Add pbi commands for block copy cmd in pbi_words
+ ***************************************************************************/
+int add_blk_cpy_cmd(FILE *fp_rcw_pbi_op, uint16_t args)
+{
+	uint32_t blk_cpy_hdr;
+	uint32_t file_size, new_file_size;
+	uint32_t align = 4;
+	int ret = FAILURE;
+	int num_pad_bytes = 0;
+
+	if ((args & BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK) == 0) {
+		printf("ERROR: Offset not specified for Block Copy Cmd.\n");
+		printf("\tSee Usage and use -f option\n");
+		goto blk_copy_err;
+	}
+
+	switch (pblimg.chassis) {
+	case CHASSIS_3:
+		/* Block copy command */
+		blk_cpy_hdr = blk_cpy_hdr_map_ch3[pblimg.boot_src];
+		pblimg.src_addr += base_addr_ch3[pblimg.boot_src];
+		break;
+	case CHASSIS_3_2:
+		/* Block copy command */
+		blk_cpy_hdr = blk_cpy_hdr_map_ch32[pblimg.boot_src];
+		pblimg.src_addr += base_addr_ch32[pblimg.boot_src];
+		break;
+	default:
+		printf("%s: Error invalid chassis type for this command.\n",
+				__func__);
+		goto blk_copy_err;
+	}
+
+	file_size = get_filesize(pblimg.sec_imgnm);
+	if (file_size > 0) {
+		new_file_size = (file_size + (file_size % align));
+
+		/* Add Block copy command */
+		if (fwrite(&blk_cpy_hdr, sizeof(blk_cpy_hdr), NUM_MEM_BLOCK,
+			fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+			printf("%s: Error writing blk_cpy_hdr to the file.\n",
+				 __func__);
+			goto blk_copy_err;
+		}
+
+		if ((args & BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK) == 0)
+			num_pad_bytes = pblimg.src_addr % 4;
+
+		/* Add Src address word */
+		if (fwrite(&pblimg.src_addr + num_pad_bytes,
+			   sizeof(pblimg.src_addr), NUM_MEM_BLOCK,
+			   fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+			printf("%s: Error writing BLK SRC Addr to the file.\n",
+				 __func__);
+			goto blk_copy_err;
+		}
+
+		/* Add Dest address word */
+		if (fwrite(&pblimg.addr, sizeof(pblimg.addr),
+			NUM_MEM_BLOCK, fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+			printf("%s: Error writing DST Addr to the file.\n",
+			__func__);
+			goto blk_copy_err;
+		}
+
+		/* Add size */
+		if (fwrite(&new_file_size, sizeof(new_file_size),
+			NUM_MEM_BLOCK, fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+			printf("%s: Error writing size to the file.\n",
+				__func__);
+			goto blk_copy_err;
+		}
+	}
+
+	ret = SUCCESS;
+
+blk_copy_err:
+	return ret;
+}
+
+/***************************************************************************
+ * Function	:	add_cpy_cmd
+ * Arguments	:	pbi_word - pointer to pbi commands
+ * Return	:	SUCCESS or FAILURE
+ * Description	:	Append pbi commands for copying BL2 image to the
+ *			load address stored in pbl_image.addr
+ ***************************************************************************/
+int add_cpy_cmd(FILE *fp_rcw_pbi_op)
+{
+	uint32_t ALTCBAR_ADDRESS = BYTE_SWAP_32(0x09570158);
+	uint32_t WAIT_CMD_WRITE_ADDRESS = BYTE_SWAP_32(0x096100c0);
+	uint32_t WAIT_CMD = BYTE_SWAP_32(0x000FFFFF);
+	int file_size;
+	uint32_t pbi_cmd, altcbar;
+	uint8_t pbi_data[MAX_PBI_DATA_LEN_BYTE];
+	uint32_t dst_offset;
+	FILE *fp_img = NULL;
+	int ret = FAILURE;
+
+	altcbar = pblimg.addr;
+	dst_offset = pblimg.addr;
+	fp_img = fopen(pblimg.sec_imgnm, "rb");
+	if (fp_img == NULL) {
+		printf("%s: Error in opening the file: %s\n", __func__,
+		      pblimg.sec_imgnm);
+		goto add_cpy_err;
+	}
+	file_size = get_filesize(pblimg.sec_imgnm);
+	altcbar = 0xfff00000 & altcbar;
+	altcbar = BYTE_SWAP_32(altcbar >> 16);
+	if (fwrite(&ALTCBAR_ADDRESS, sizeof(ALTCBAR_ADDRESS), NUM_MEM_BLOCK,
+		fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+		printf("%s: Error in writing address of ALTCFG CMD.\n",
+			 __func__);
+		goto add_cpy_err;
+	}
+	if (fwrite(&altcbar, sizeof(altcbar), NUM_MEM_BLOCK, fp_rcw_pbi_op)
+		!= NUM_MEM_BLOCK) {
+		printf("%s: Error in writing ALTCFG CMD.\n", __func__);
+		goto add_cpy_err;
+	}
+	if (fwrite(&WAIT_CMD_WRITE_ADDRESS, sizeof(WAIT_CMD_WRITE_ADDRESS),
+		NUM_MEM_BLOCK, fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+		printf("%s: Error in writing address of WAIT_CMD.\n",
+			__func__);
+		goto add_cpy_err;
+	}
+	if (fwrite(&WAIT_CMD, sizeof(WAIT_CMD), NUM_MEM_BLOCK, fp_rcw_pbi_op)
+		!= NUM_MEM_BLOCK) {
+		printf("%s: Error in writing WAIT_CMD.\n", __func__);
+		goto add_cpy_err;
+	}
+	do {
+		memset(pbi_data, 0, MAX_PBI_DATA_LEN_BYTE);
+
+		ret = fread(&pbi_data, MAX_PBI_DATA_LEN_BYTE,
+				NUM_MEM_BLOCK, fp_img);
+		if ((ret != NUM_MEM_BLOCK) && (!feof(fp_img))) {
+			printf("%s: Error writing ALTCFG Word: [%d].\n",
+				__func__, ret);
+			goto add_cpy_err;
+		}
+
+		dst_offset &= OFFSET_MASK;
+		pbi_cmd = WRITE_CMD_BASE | dst_offset;
+		pbi_cmd = BYTE_SWAP_32(pbi_cmd);
+		if (fwrite(&pbi_cmd, sizeof(pbi_cmd), NUM_MEM_BLOCK,
+			fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+			printf("%s: Error writing ALTCFG Word write cmd.\n",
+				 __func__);
+			goto add_cpy_err;
+		}
+		if (fwrite(&pbi_data,  MAX_PBI_DATA_LEN_BYTE, NUM_MEM_BLOCK,
+			fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+			printf("%s: Error writing ALTCFG_Word.\n", __func__);
+			goto add_cpy_err;
+		}
+		dst_offset += MAX_PBI_DATA_LEN_BYTE;
+		file_size -= MAX_PBI_DATA_LEN_BYTE;
+	} while (!feof(fp_img));
+
+	ret = SUCCESS;
+
+add_cpy_err:
+	if (fp_img != NULL) {
+		fclose(fp_img);
+	}
+	return ret;
+}
+
+int main(int argc, char **argv)
+{
+	FILE *file = NULL;
+	char *ptr;
+	int opt;
+	int tmp;
+	uint16_t args = ARG_INIT_MASK;
+	FILE *fp_rcw_pbi_ip = NULL, *fp_rcw_pbi_op = NULL;
+	uint32_t word, word_1;
+	int ret = FAILURE;
+	bool bootptr_flag = false;
+	enum stop_command flag_stop_cmd = CRC_STOP_COMMAND;
+
+	/* Initializing the global structure to zero. */
+	memset(&pblimg, 0x0, sizeof(struct pbl_image));
+
+	while ((opt = getopt(argc, argv,
+			     ":b:f:r:i:e:d:c:o:h:s")) != -1) {
+		switch (opt) {
+		case 'd':
+			pblimg.addr = strtoull(optarg, &ptr, 16);
+			if (*ptr != 0) {
+				fprintf(stderr, "CMD Error: invalid load or destination address %s\n", optarg);
+				goto exit_main;
+			}
+			args |= BL2_BIN_CPY_DEST_ADDR_ARG_MASK;
+			break;
+		case 'r':
+			pblimg.rcw_nm = optarg;
+			file = fopen(pblimg.rcw_nm, "r");
+			if (file == NULL) {
+				printf("CMD Error: Opening the RCW File.\n");
+				goto exit_main;
+			} else {
+				args |= RCW_FILE_NAME_ARG_MASK;
+				fclose(file);
+			}
+			break;
+		case 'e':
+			bootptr_flag = true;
+			pblimg.ep = strtoull(optarg, &ptr, 16);
+			if (*ptr != 0) {
+				fprintf(stderr,
+				"CMD Error: Invalid entry point %s\n", optarg);
+				goto exit_main;
+			}
+			break;
+		case 'h':
+			print_usage();
+			break;
+		case 'i':
+			pblimg.sec_imgnm = optarg;
+			file = fopen(pblimg.sec_imgnm, "r");
+			if (file == NULL) {
+				printf("CMD Error: Opening Input file.\n");
+				goto exit_main;
+			} else {
+				args |= IN_FILE_NAME_ARG_MASK;
+				fclose(file);
+			}
+			break;
+		case 'c':
+			tmp = atoi(optarg);
+			switch (tmp) {
+			case SOC_LS1012:
+			case SOC_LS1023:
+			case SOC_LS1026:
+			case SOC_LS1043:
+			case SOC_LS1046:
+				pblimg.chassis = CHASSIS_2;
+				break;
+			case SOC_LS1088:
+			case SOC_LS2080:
+			case SOC_LS2088:
+				pblimg.chassis = CHASSIS_3;
+				break;
+			case SOC_LS1028:
+			case SOC_LX2160:
+				pblimg.chassis = CHASSIS_3_2;
+				break;
+			default:
+			printf("CMD Error: Invalid SoC Val = %d.\n", tmp);
+				goto exit_main;
+			}
+
+			args |= CHASSIS_ARG_MASK;
+			break;
+		case 'o':
+			pblimg.imagefile = optarg;
+			args |= OP_FILE_NAME_ARG_MASK;
+			break;
+		case 's':
+			sb_flag = true;
+			break;
+		case 'b':
+			if (strcmp(optarg, "qspi") == 0) {
+				pblimg.boot_src = QSPI_BOOT;
+			} else if (strcmp(optarg, "nor") == 0) {
+				pblimg.boot_src = IFC_NOR_BOOT;
+			} else if (strcmp(optarg, "nand") == 0) {
+				pblimg.boot_src = IFC_NAND_BOOT;
+			} else if (strcmp(optarg, "sd") == 0) {
+				pblimg.boot_src = SD_BOOT;
+			} else if (strcmp(optarg, "emmc") == 0) {
+				pblimg.boot_src = EMMC_BOOT;
+			} else if (strcmp(optarg, "flexspi_nor") == 0) {
+				pblimg.boot_src = FLXSPI_NOR_BOOT;
+			} else if (strcmp(optarg, "flexspi_nand") == 0) {
+				pblimg.boot_src = FLXSPI_NAND_BOOT;
+			} else if (strcmp(optarg, "flexspi_nand2k") == 0) {
+				pblimg.boot_src = FLXSPI_NAND4K_BOOT;
+			} else {
+				printf("CMD Error: Invalid boot source.\n");
+				goto exit_main;
+			}
+			args |= BOOT_SRC_ARG_MASK;
+			break;
+		case 'f':
+			pblimg.src_addr = strtoull(optarg, &ptr, 16);
+			if (*ptr != 0) {
+				fprintf(stderr,
+				"CMD Error: Invalid src offset %s\n", optarg);
+				goto exit_main;
+			}
+			args |= BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK;
+			break;
+		default:
+			/* issue a warning and skip the unknown arg */
+			printf("Cmd Warning: Invalid Arg = %c.\n", opt);
+		}
+	}
+
+	if ((args & MAND_ARG_MASK) != MAND_ARG_MASK) {
+		print_usage();
+	}
+
+	fp_rcw_pbi_ip = fopen(pblimg.rcw_nm, "rb");
+	if (fp_rcw_pbi_ip == NULL) {
+		printf("%s: Error in opening the rcw file: %s\n",
+			__func__, pblimg.rcw_nm);
+		goto exit_main;
+	}
+
+	fp_rcw_pbi_op = fopen(pblimg.imagefile, "wb+");
+	if (fp_rcw_pbi_op == NULL) {
+		printf("%s: Error opening the input file: %s\n",
+			__func__, pblimg.imagefile);
+		goto exit_main;
+	}
+
+	printf("\nInput Boot Source: %s\n", boot_src_string[pblimg.boot_src]);
+	printf("Input RCW File: %s\n", pblimg.rcw_nm);
+	printf("Input BL2 Binary File: %s\n", pblimg.sec_imgnm);
+	printf("Input load address for BL2 Binary File: 0x%x\n", pblimg.addr);
+
+	printf("Chassis Type: %d\n", pblimg.chassis);
+	switch (pblimg.chassis) {
+	case CHASSIS_2:
+		if (fread(&word, sizeof(word), NUM_MEM_BLOCK, fp_rcw_pbi_ip)
+			!= NUM_MEM_BLOCK) {
+			printf("%s: Error in reading word from the rcw file.\n",
+				__func__);
+			goto exit_main;
+		}
+		while (BYTE_SWAP_32(word) != 0x08610040) {
+			if (BYTE_SWAP_32(word) == 0x09550000
+				|| BYTE_SWAP_32(word) == 0x000f400c) {
+				break;
+			}
+			if (fwrite(&word, sizeof(word), NUM_MEM_BLOCK,
+				fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+				printf("%s: [CH2] Error in Writing PBI Words\n",
+				__func__);
+				goto exit_main;
+			}
+			if (fread(&word, sizeof(word), NUM_MEM_BLOCK,
+				fp_rcw_pbi_ip) != NUM_MEM_BLOCK) {
+				printf("%s: [CH2] Error in Reading PBI Words\n",
+					__func__);
+				goto exit_main;
+			}
+		}
+
+		if (bootptr_flag == true) {
+			/* Add command to set boot_loc ptr */
+			ret = add_boot_ptr_cmd(fp_rcw_pbi_op);
+			if (ret != SUCCESS) {
+				goto exit_main;
+			}
+		}
+
+		/* Write acs write commands to output file */
+		ret = add_cpy_cmd(fp_rcw_pbi_op);
+		if (ret != SUCCESS) {
+			goto exit_main;
+		}
+
+		/* Add stop command after adding pbi commands
+		 * For Chasis 2.0 platforms it is always CRC &
+		 * Stop command
+		 */
+		flag_stop_cmd = CRC_STOP_COMMAND;
+		ret = add_pbi_stop_cmd(fp_rcw_pbi_op, flag_stop_cmd);
+		if (ret != SUCCESS) {
+			goto exit_main;
+		}
+
+	break;
+
+	case CHASSIS_3:
+	case CHASSIS_3_2:
+		if (fread(&word, sizeof(word), NUM_MEM_BLOCK, fp_rcw_pbi_ip)
+			!= NUM_MEM_BLOCK) {
+			printf("%s: Error reading PBI Cmd.\n", __func__);
+			goto exit_main;
+		}
+		while (word != 0x808f0000 && word != 0x80ff0000) {
+			pbl_size++;
+			/* 11th words in RCW has PBL length. Update it
+			 * with new length. 2 comamnds get added
+			 * Block copy + CCSR Write/CSF header write
+			 */
+			if (pbl_size == 11) {
+				word_1 = (word & PBI_LEN_MASK)
+					+ (PBI_LEN_ADD << 20);
+				word = word & ~PBI_LEN_MASK;
+				word = word | word_1;
+			}
+			/* Update the CRC command */
+			/* Check load command..
+			 * add a check if command is Stop with CRC
+			 * or stop without checksum
+			 */
+			if (pbl_size == 35) {
+				word = crypto_calculate_checksum(fp_rcw_pbi_op,
+						NUM_RCW_WORD - 1);
+				if (word == FAILURE) {
+					goto exit_main;
+				}
+			}
+			if (fwrite(&word, sizeof(word),	NUM_MEM_BLOCK,
+				fp_rcw_pbi_op) != NUM_MEM_BLOCK) {
+				printf("%s: [CH3] Error in Writing PBI Words\n",
+					__func__);
+				goto exit_main;
+			}
+			if (fread(&word, sizeof(word), NUM_MEM_BLOCK,
+				fp_rcw_pbi_ip) != NUM_MEM_BLOCK) {
+				printf("%s: [CH3] Error in Reading PBI Words\n",
+					 __func__);
+				goto exit_main;
+			}
+
+			if (word == CRC_STOP_CMD_ARM_CH3) {
+				flag_stop_cmd = CRC_STOP_COMMAND;
+			} else if (word == STOP_CMD_ARM_CH3) {
+				flag_stop_cmd = STOP_COMMAND;
+			}
+		}
+		if (bootptr_flag == true) {
+			/* Add command to set boot_loc ptr */
+			ret = add_boot_ptr_cmd(fp_rcw_pbi_op);
+			if (ret != SUCCESS) {
+				printf("%s: add_boot_ptr_cmd return failure.\n",
+					__func__);
+				goto exit_main;
+			}
+		}
+
+		/* Write acs write commands to output file */
+		ret = add_blk_cpy_cmd(fp_rcw_pbi_op, args);
+		if (ret != SUCCESS) {
+			printf("%s: Function add_blk_cpy_cmd return failure.\n",
+				 __func__);
+			goto exit_main;
+		}
+
+		/* Add stop command after adding pbi commands */
+		ret = add_pbi_stop_cmd(fp_rcw_pbi_op, flag_stop_cmd);
+		if (ret != SUCCESS) {
+			goto exit_main;
+		}
+
+	break;
+
+	default:
+		printf("%s: Unknown chassis type.\n",
+				__func__);
+	}
+
+	if (ret == SUCCESS) {
+		printf("Output file successfully created with name: %s\n\n",
+			   pblimg.imagefile);
+	}
+
+exit_main:
+	if (fp_rcw_pbi_op != NULL) {
+		fclose(fp_rcw_pbi_op);
+	}
+	if (fp_rcw_pbi_ip != NULL) {
+		fclose(fp_rcw_pbi_ip);
+	}
+
+	return ret;
+}
diff --git a/tools/nxp/create_pbl/create_pbl.mk b/tools/nxp/create_pbl/create_pbl.mk
new file mode 100644
index 0000000..305c049
--- /dev/null
+++ b/tools/nxp/create_pbl/create_pbl.mk
@@ -0,0 +1,52 @@
+#
+# Copyright 2018-2020 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+
+CREATE_PBL	?=	${CREATE_PBL_TOOL_PATH}/create_pbl${BIN_EXT}
+BYTE_SWAP	?=	${CREATE_PBL_TOOL_PATH}/byte_swap${BIN_EXT}
+
+HOST_GCC	:= gcc
+
+#SWAP is required for Chassis 2 platforms - LS102, ls1043 and ls1046 for QSPI
+ifeq (${SOC},ls1046a)
+SOC_NUM :=	1046a
+SWAP	= 	1
+CH	=	2
+else ifeq (${SOC},ls1043a)
+SOC_NUM :=	1043a
+SWAP	= 	1
+CH	=	2
+else ifeq (${SOC},ls1012a)
+SOC_NUM :=	1012a
+SWAP	= 	1
+CH	=	2
+else ifeq (${SOC},ls1088a)
+SOC_NUM :=	1088a
+CH	=	3
+else ifeq (${SOC},ls2088a)
+SOC_NUM :=	2088a
+CH	=	3
+else ifeq (${SOC},lx2160a)
+SOC_NUM :=	2160a
+CH	=	3
+else ifeq (${SOC},ls1028a)
+SOC_NUM :=	1028a
+CH	=	3
+else
+$(error "Check SOC Not defined in create_pbl.mk.")
+endif
+
+ifeq (${CH},2)
+
+include ${CREATE_PBL_TOOL_PATH}/pbl_ch2.mk
+
+endif #CH2
+
+ifeq (${CH},3)
+
+include ${CREATE_PBL_TOOL_PATH}/pbl_ch3.mk
+
+endif #CH3
diff --git a/tools/nxp/create_pbl/pbl_ch2.mk b/tools/nxp/create_pbl/pbl_ch2.mk
new file mode 100644
index 0000000..e6f1d8b
--- /dev/null
+++ b/tools/nxp/create_pbl/pbl_ch2.mk
@@ -0,0 +1,60 @@
+#
+# Copyright 2020 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+
+CREATE_PBL	?=	${CREATE_PBL_TOOL_PATH}/create_pbl${BIN_EXT}
+BYTE_SWAP	?=	${CREATE_PBL_TOOL_PATH}/byte_swap${BIN_EXT}
+
+HOST_GCC	:= gcc
+
+.PHONY: pbl
+pbl:	${BUILD_PLAT}/bl2.bin
+ifeq ($(SECURE_BOOT),yes)
+pbl: ${BUILD_PLAT}/bl2.bin
+ifeq ($(RCW),"")
+	${Q}echo "Platform ${PLAT} requires rcw file. Please set RCW to point to the right RCW file for boot mode ${BOOT_MODE}"
+else
+	# Generate header for bl2.bin
+	$(Q)$(CST_DIR)/create_hdr_isbc --in ${BUILD_PLAT}/bl2.bin --out ${BUILD_PLAT}/hdr_bl2 ${BL2_INPUT_FILE}
+	# Compile create_pbl tool
+	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${CREATE_PBL_TOOL_PATH};\
+	# Add bl2.bin to RCW
+	${CREATE_PBL} -r ${RCW} -i ${BUILD_PLAT}/bl2.bin -b ${BOOT_MODE} -c ${SOC_NUM} -d ${BL2_BASE} -e ${BL2_BASE}\
+			-o ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl ;\
+	# Add header to RCW
+	${CREATE_PBL} -r ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl -i ${BUILD_PLAT}/hdr_bl2 -b ${BOOT_MODE} -c ${SOC_NUM} \
+			-d ${BL2_HDR_LOC} -e ${BL2_HDR_LOC} -o ${BUILD_PLAT}/bl2_${BOOT_MODE}_sec.pbl -s;\
+	rm ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl
+# Swapping of RCW is required for QSPi Chassis 2 devices
+ifeq (${BOOT_MODE}, qspi)
+ifeq ($(SWAP),1)
+	${Q}echo "Byteswapping RCW for QSPI"
+	${BYTE_SWAP} ${BUILD_PLAT}/bl2_${BOOT_MODE}_sec.pbl;
+endif # SWAP
+endif # BOOT_MODE
+	cd ${CREATE_PBL_TOOL_PATH}; ${MAKE} clean ; cd -;
+endif
+else  # NON SECURE_BOOT
+ifeq ($(RCW),"")
+	${Q}echo "Platform ${PLAT} requires rcw file. Please set RCW to point to the right RCW file for boot mode ${BOOT_MODE}"
+else
+	# -a option appends the image for Chassis 3 devices in case of non secure boot
+	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${CREATE_PBL_TOOL_PATH};
+	${CREATE_PBL} -r ${RCW} -i ${BUILD_PLAT}/bl2.bin -b ${BOOT_MODE} -c ${SOC_NUM} -d ${BL2_BASE} -e ${BL2_BASE} \
+	-o ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl ;
+# Swapping of RCW is required for QSPi Chassis 2 devices
+ifeq (${BOOT_MODE}, qspi)
+ifeq ($(SWAP),1)
+	${Q}echo "Byteswapping RCW for QSPI"
+	${BYTE_SWAP} ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl;
+endif # SWAP
+endif # BOOT_MODE
+	cd ${CREATE_PBL_TOOL_PATH}; ${MAKE} clean ; cd -;
+endif
+endif # SECURE_BOOT
+
+
+
diff --git a/tools/nxp/create_pbl/pbl_ch3.mk b/tools/nxp/create_pbl/pbl_ch3.mk
new file mode 100644
index 0000000..9283474
--- /dev/null
+++ b/tools/nxp/create_pbl/pbl_ch3.mk
@@ -0,0 +1,71 @@
+#
+# Copyright 2018-2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+SHELL=/bin/bash
+
+CREATE_PBL	?=	${CREATE_PBL_TOOL_PATH}/create_pbl${BIN_EXT}
+BYTE_SWAP	?=	${CREATE_PBL_TOOL_PATH}/byte_swap${BIN_EXT}
+
+HOST_GCC	:= gcc
+
+BL2_SRC_OFFSET ?= 0x9000
+BL2_HDR_SRC_OFFSET ?= 0x5000
+bl2_hdr_loc=$(shell echo $$(( $(BL2_HDR_SRC_OFFSET) / 1024 )))
+bl2_loc=$(shell echo $$(( $(BL2_SRC_OFFSET) / 1024 )))
+
+.PHONY: pbl
+pbl:	${BUILD_PLAT}/bl2.bin
+ifeq ($(SECURE_BOOT),yes)
+pbl: ${BUILD_PLAT}/bl2.bin
+ifeq ($(RCW),"")
+	${Q}echo "Platform ${PLAT} requires rcw file. Please set RCW to point to the right RCW file for boot mode ${BOOT_MODE}"
+else
+	# Generate header for bl2.bin
+	$(Q)$(CST_DIR)/create_hdr_isbc --in ${BUILD_PLAT}/bl2.bin --out ${BUILD_PLAT}/hdr_bl2 ${BL2_INPUT_FILE}
+
+	# Compile create_pbl tool
+	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${CREATE_PBL_TOOL_PATH};\
+
+	# Add Block Copy command for bl2.bin to RCW
+	${CREATE_PBL} -r ${RCW} -i ${BUILD_PLAT}/bl2.bin -b ${BOOT_MODE} -c ${SOC_NUM} -d ${BL2_BASE} -e ${BL2_BASE}\
+			-o ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl -f ${BL2_SRC_OFFSET};\
+
+	# Add Block Copy command and Load CSF header command to RCW
+	${CREATE_PBL} -r ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl -i ${BUILD_PLAT}/hdr_bl2 -b ${BOOT_MODE} -c ${SOC_NUM} \
+			-d ${BL2_HDR_LOC} -e ${BL2_HDR_LOC} -s -f ${BL2_HDR_SRC_OFFSET}	\
+			-o ${BUILD_PLAT}/rcw_sec.pbl
+
+	# Sign and add "Load Security Header command to PBI commands
+	$(Q)$(CST_DIR)/create_hdr_pbi --out ${BUILD_PLAT}/bl2_${BOOT_MODE}_sec.pbl --in ${BUILD_PLAT}/rcw_sec.pbl ${PBI_INPUT_FILE}
+
+	# Append the bl2_hdr to the RCW image
+	@echo "${bl2_hdr_loc}"
+	dd if=${BUILD_PLAT}/hdr_bl2 of=${BUILD_PLAT}/bl2_${BOOT_MODE}_sec.pbl bs=1K seek=${bl2_hdr_loc}
+
+	# Append the bl2.bin to the RCW image
+	@echo "${bl2_loc}"
+	dd if=${BUILD_PLAT}/bl2.bin of=${BUILD_PLAT}/bl2_${BOOT_MODE}_sec.pbl bs=1K seek=${bl2_loc}
+
+	rm ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl
+	cd ${CREATE_PBL_TOOL_PATH}; ${MAKE} clean ; cd -;
+endif
+else  #SECURE_BOOT
+ifeq ($(RCW),"")
+	${Q}echo "Platform ${PLAT} requires rcw file. Please set RCW to point to the right RCW file for boot mode ${BOOT_MODE}"
+else
+	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${CREATE_PBL_TOOL_PATH};
+
+	# Add Block Copy command and populate boot loc ptrfor bl2.bin to RCW
+	${CREATE_PBL} -r ${RCW} -i ${BUILD_PLAT}/bl2.bin -b ${BOOT_MODE} -c ${SOC_NUM} -d ${BL2_BASE} -e ${BL2_BASE} \
+	-o ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl -f ${BL2_SRC_OFFSET};
+
+	# Append the bl2.bin to the RCW image
+	@echo "bl2_loc is ${bl2_loc} KB"
+	dd if=${BUILD_PLAT}/bl2.bin of=${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl bs=1K seek=${bl2_loc}
+
+	cd ${CREATE_PBL_TOOL_PATH}; ${MAKE} clean ; cd -;
+endif
+endif # SECURE_BOOT
diff --git a/tools/nxp/plat_fiptool/plat_def_uuid_config.c b/tools/nxp/plat_fiptool/plat_def_uuid_config.c
new file mode 100644
index 0000000..fdb4b93
--- /dev/null
+++ b/tools/nxp/plat_fiptool/plat_def_uuid_config.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stddef.h>
+
+#include <firmware_image_package.h>
+
+#include "tbbr_config.h"
+
+toc_entry_t plat_def_toc_entries[] = {
+	/* DDR PHY firmwares */
+	{
+		.name = "DDR UDIMM PHY IMEM 1d FW",
+		.uuid = UUID_DDR_IMEM_UDIMM_1D,
+		.cmdline_name = "ddr-immem-udimm-1d"
+	},
+	{
+		.name = "DDR UDIMM PHY IMEM 2d FW",
+		.uuid = UUID_DDR_IMEM_UDIMM_2D,
+		.cmdline_name = "ddr-immem-udimm-2d"
+	},
+	{
+		.name = "DDR UDIMM PHY DMEM 1d FW",
+		.uuid = UUID_DDR_DMEM_UDIMM_1D,
+		.cmdline_name = "ddr-dmmem-udimm-1d"
+	},
+	{
+		.name = "DDR UDIMM PHY DMEM 2d FW",
+		.uuid = UUID_DDR_DMEM_UDIMM_2D,
+		.cmdline_name = "ddr-dmmem-udimm-2d"
+	},
+	{
+		.name = "DDR RDIMM PHY IMEM 1d FW",
+		.uuid = UUID_DDR_IMEM_RDIMM_1D,
+		.cmdline_name = "ddr-immem-rdimm-1d"
+	},
+	{
+		.name = "DDR RDIMM PHY IMEM 2d FW",
+		.uuid = UUID_DDR_IMEM_RDIMM_2D,
+		.cmdline_name = "ddr-immem-rdimm-2d"
+	},
+	{
+		.name = "DDR RDIMM PHY DMEM 1d FW",
+		.uuid = UUID_DDR_DMEM_RDIMM_1D,
+		.cmdline_name = "ddr-dmmem-rdimm-1d"
+	},
+	{
+		.name = "DDR RDIMM PHY DMEM 2d FW",
+		.uuid = UUID_DDR_DMEM_RDIMM_2D,
+		.cmdline_name = "ddr-dmmem-rdimm-2d"
+	},
+	{
+		.name = "FUSE PROV FW",
+		.uuid = UUID_FUSE_PROV,
+		.cmdline_name = "fuse-prov"
+	},
+	{
+		.name = "FUSE UPGRADE FW",
+		.uuid = UUID_FUSE_UP,
+		.cmdline_name = "fuse-upgrade"
+	},
+
+	/* Key Certificates */
+	{
+		.name = "DDR Firmware key certificate",
+		.uuid = UUID_DDR_FW_KEY_CERT,
+		.cmdline_name = "ddr-fw-key-cert"
+	},
+
+	/* Content certificates */
+	{
+		.name = "DDR UDIMM Firmware content certificate",
+		.uuid = UUID_DDR_UDIMM_FW_CONTENT_CERT,
+		.cmdline_name = "ddr-udimm-fw-cert"
+	},
+	{
+		.name = "DDR RDIMM Firmware content certificate",
+		.uuid = UUID_DDR_RDIMM_FW_CONTENT_CERT,
+		.cmdline_name = "ddr-rdimm-fw-cert"
+	},
+
+	{
+		.name = NULL,
+		.uuid = { {0} },
+		.cmdline_name = NULL,
+	}
+};
diff --git a/tools/nxp/plat_fiptool/plat_fiptool.mk b/tools/nxp/plat_fiptool/plat_fiptool.mk
new file mode 100644
index 0000000..ca2962a
--- /dev/null
+++ b/tools/nxp/plat_fiptool/plat_fiptool.mk
@@ -0,0 +1,33 @@
+#
+# Copyright (c) 2021, NXP. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Name of the platform defined source file name,
+# which contains platform defined UUID entries populated
+# in the plat_def_toc_entries[].
+PLAT_DEF_UUID_CONFIG_FILE_NAME	:= plat_def_uuid_config
+
+PLAT_DEF_UUID_CONFIG_FILE_PATH := ../nxp/plat_fiptool
+
+PLAT_DEF_OID := yes
+PLAT_DEF_UUID := yes
+PLAT_DEF_UUID_OID_CONFIG_PATH := ../../plat/nxp/common/fip_handler/common
+
+
+INCLUDE_PATHS += -I${PLAT_DEF_UUID_OID_CONFIG_PATH} \
+		 -I./
+# Clean the stale object file.
+$(shell rm ${PLAT_DEF_UUID_CONFIG_FILE_PATH}/${PLAT_DEF_UUID_CONFIG_FILE_NAME}.o)
+
+ifeq (${PLAT_DEF_OID},yes)
+HOSTCCFLAGS += -DPLAT_DEF_OID
+endif
+
+ifeq (${PLAT_DEF_UUID},yes)
+HOSTCCFLAGS += -DPLAT_DEF_FIP_UUID
+PLAT_OBJECTS += ${PLAT_DEF_UUID_CONFIG_FILE_PATH}/${PLAT_DEF_UUID_CONFIG_FILE_NAME}.o
+endif
+
+OBJECTS += ${PLAT_OBJECTS}