summaryrefslogtreecommitdiffstats
path: root/docs/design/psci-pd-tree.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/design/psci-pd-tree.rst')
-rw-r--r--docs/design/psci-pd-tree.rst304
1 files changed, 304 insertions, 0 deletions
diff --git a/docs/design/psci-pd-tree.rst b/docs/design/psci-pd-tree.rst
new file mode 100644
index 0000000..56a6d6f
--- /dev/null
+++ b/docs/design/psci-pd-tree.rst
@@ -0,0 +1,304 @@
+PSCI Power Domain Tree Structure
+================================
+
+Requirements
+------------
+
+#. A platform must export the ``plat_get_aff_count()`` and
+ ``plat_get_aff_state()`` APIs to enable the generic PSCI code to
+ populate a tree that describes the hierarchy of power domains in the
+ system. This approach is inflexible because a change to the topology
+ requires a change in the code.
+
+ It would be much simpler for the platform to describe its power domain tree
+ in a data structure.
+
+#. The generic PSCI code generates MPIDRs in order to populate the power domain
+ tree. It also uses an MPIDR to find a node in the tree. The assumption that
+ a platform will use exactly the same MPIDRs as generated by the generic PSCI
+ code is not scalable. The use of an MPIDR also restricts the number of
+ levels in the power domain tree to four.
+
+ Therefore, there is a need to decouple allocation of MPIDRs from the
+ mechanism used to populate the power domain topology tree.
+
+#. The current arrangement of the power domain tree requires a binary search
+ over the sibling nodes at a particular level to find a specified power
+ domain node. During a power management operation, the tree is traversed from
+ a 'start' to an 'end' power level. The binary search is required to find the
+ node at each level. The natural way to perform this traversal is to
+ start from a leaf node and follow the parent node pointer to reach the end
+ level.
+
+ Therefore, there is a need to define data structures that implement the tree in
+ a way which facilitates such a traversal.
+
+#. The attributes of a core power domain differ from the attributes of power
+ domains at higher levels. For example, only a core power domain can be identified
+ using an MPIDR. There is no requirement to perform state coordination while
+ performing a power management operation on the core power domain.
+
+ Therefore, there is a need to implement the tree in a way which facilitates this
+ distinction between a leaf and non-leaf node and any associated
+ optimizations.
+
+--------------
+
+Design
+------
+
+Describing a power domain tree
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To fulfill requirement 1., the existing platform APIs
+``plat_get_aff_count()`` and ``plat_get_aff_state()`` have been
+removed. A platform must define an array of unsigned chars such that:
+
+#. The first entry in the array specifies the number of power domains at the
+ highest power level implemented in the platform. This caters for platforms
+ where the power domain tree does not have a single root node, for example,
+ the FVP has two cluster power domains at the highest level (1).
+
+#. Each subsequent entry corresponds to a power domain and contains the number
+ of power domains that are its direct children.
+
+#. The size of the array minus the first entry will be equal to the number of
+ non-leaf power domains.
+
+#. The value in each entry in the array is used to find the number of entries
+ to consider at the next level. The sum of the values (number of children) of
+ all the entries at a level specifies the number of entries in the array for
+ the next level.
+
+The following example power domain topology tree will be used to describe the
+above text further. The leaf and non-leaf nodes in this tree have been numbered
+separately.
+
+::
+
+ +-+
+ |0|
+ +-+
+ / \
+ / \
+ / \
+ / \
+ / \
+ / \
+ / \
+ / \
+ / \
+ / \
+ +-+ +-+
+ |1| |2|
+ +-+ +-+
+ / \ / \
+ / \ / \
+ / \ / \
+ / \ / \
+ +-+ +-+ +-+ +-+
+ |3| |4| |5| |6|
+ +-+ +-+ +-+ +-+
+ +---+-----+ +----+----| +----+----+ +----+-----+-----+
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ v v v v v v v v v v v v v
+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +--+ +--+ +--+
+ |0| |1| |2| |3| |4| |5| |6| |7| |8| |9| |10| |11| |12|
+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +--+ +--+ +--+
+
+This tree is defined by the platform as the array described above as follows:
+
+.. code:: c
+
+ #define PLAT_NUM_POWER_DOMAINS 20
+ #define PLATFORM_CORE_COUNT 13
+ #define PSCI_NUM_NON_CPU_PWR_DOMAINS \
+ (PLAT_NUM_POWER_DOMAINS - PLATFORM_CORE_COUNT)
+
+ unsigned char plat_power_domain_tree_desc[] = { 1, 2, 2, 2, 3, 3, 3, 4};
+
+Removing assumptions about MPIDRs used in a platform
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To fulfill requirement 2., it is assumed that the platform assigns a
+unique number (core index) between ``0`` and ``PLAT_CORE_COUNT - 1`` to each core
+power domain. MPIDRs could be allocated in any manner and will not be used to
+populate the tree.
+
+``plat_core_pos_by_mpidr(mpidr)`` will return the core index for the core
+corresponding to the MPIDR. It will return an error (-1) if an MPIDR is passed
+which is not allocated or corresponds to an absent core. The semantics of this
+platform API have changed since it is required to validate the passed MPIDR. It
+has been made a mandatory API as a result.
+
+Another mandatory API, ``plat_my_core_pos()`` has been added to return the core
+index for the calling core. This API provides a more lightweight mechanism to get
+the index since there is no need to validate the MPIDR of the calling core.
+
+The platform should assign the core indices (as illustrated in the diagram above)
+such that, if the core nodes are numbered from left to right, then the index
+for a core domain will be the same as the index returned by
+``plat_core_pos_by_mpidr()`` or ``plat_my_core_pos()`` for that core. This
+relationship allows the core nodes to be allocated in a separate array
+(requirement 4.) during ``psci_setup()`` in such an order that the index of the
+core in the array is the same as the return value from these APIs.
+
+Dealing with holes in MPIDR allocation
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+For platforms where the number of allocated MPIDRs is equal to the number of
+core power domains, for example, Juno and FVPs, the logic to convert an MPIDR to
+a core index should remain unchanged. Both Juno and FVP use a simple collision
+proof hash function to do this.
+
+It is possible that on some platforms, the allocation of MPIDRs is not
+contiguous or certain cores have been disabled. This essentially means that the
+MPIDRs have been sparsely allocated, that is, the size of the range of MPIDRs
+used by the platform is not equal to the number of core power domains.
+
+The platform could adopt one of the following approaches to deal with this
+scenario:
+
+#. Implement more complex logic to convert a valid MPIDR to a core index while
+ maintaining the relationship described earlier. This means that the power
+ domain tree descriptor will not describe any core power domains which are
+ disabled or absent. Entries will not be allocated in the tree for these
+ domains.
+
+#. Treat unallocated MPIDRs and disabled cores as absent but still describe them
+ in the power domain descriptor, that is, the number of core nodes described
+ is equal to the size of the range of MPIDRs allocated. This approach will
+ lead to memory wastage since entries will be allocated in the tree but will
+ allow use of a simpler logic to convert an MPIDR to a core index.
+
+Traversing through and distinguishing between core and non-core power domains
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To fulfill requirement 3 and 4, separate data structures have been defined
+to represent leaf and non-leaf power domain nodes in the tree.
+
+.. code:: c
+
+ /*******************************************************************************
+ * The following two data structures implement the power domain tree. The tree
+ * is used to track the state of all the nodes i.e. power domain instances
+ * described by the platform. The tree consists of nodes that describe CPU power
+ * domains i.e. leaf nodes and all other power domains which are parents of a
+ * CPU power domain i.e. non-leaf nodes.
+ ******************************************************************************/
+ typedef struct non_cpu_pwr_domain_node {
+ /*
+ * Index of the first CPU power domain node level 0 which has this node
+ * as its parent.
+ */
+ unsigned int cpu_start_idx;
+
+ /*
+ * Number of CPU power domains which are siblings of the domain indexed
+ * by 'cpu_start_idx' i.e. all the domains in the range 'cpu_start_idx
+ * -> cpu_start_idx + ncpus' have this node as their parent.
+ */
+ unsigned int ncpus;
+
+ /* Index of the parent power domain node */
+ unsigned int parent_node;
+
+ -----
+ } non_cpu_pd_node_t;
+
+ typedef struct cpu_pwr_domain_node {
+ u_register_t mpidr;
+
+ /* Index of the parent power domain node */
+ unsigned int parent_node;
+
+ -----
+ } cpu_pd_node_t;
+
+The power domain tree is implemented as a combination of the following data
+structures.
+
+.. code:: c
+
+ non_cpu_pd_node_t psci_non_cpu_pd_nodes[PSCI_NUM_NON_CPU_PWR_DOMAINS];
+ cpu_pd_node_t psci_cpu_pd_nodes[PLATFORM_CORE_COUNT];
+
+Populating the power domain tree
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The ``populate_power_domain_tree()`` function in ``psci_setup.c`` implements the
+algorithm to parse the power domain descriptor exported by the platform to
+populate the two arrays. It is essentially a breadth-first-search. The nodes for
+each level starting from the root are laid out one after another in the
+``psci_non_cpu_pd_nodes`` and ``psci_cpu_pd_nodes`` arrays as follows:
+
+::
+
+ psci_non_cpu_pd_nodes -> [[Level 3 nodes][Level 2 nodes][Level 1 nodes]]
+ psci_cpu_pd_nodes -> [Level 0 nodes]
+
+For the example power domain tree illustrated above, the ``psci_cpu_pd_nodes``
+will be populated as follows. The value in each entry is the index of the parent
+node. Other fields have been ignored for simplicity.
+
+::
+
+ +-------------+ ^
+ CPU0 | 3 | |
+ +-------------+ |
+ CPU1 | 3 | |
+ +-------------+ |
+ CPU2 | 3 | |
+ +-------------+ |
+ CPU3 | 4 | |
+ +-------------+ |
+ CPU4 | 4 | |
+ +-------------+ |
+ CPU5 | 4 | | PLATFORM_CORE_COUNT
+ +-------------+ |
+ CPU6 | 5 | |
+ +-------------+ |
+ CPU7 | 5 | |
+ +-------------+ |
+ CPU8 | 5 | |
+ +-------------+ |
+ CPU9 | 6 | |
+ +-------------+ |
+ CPU10 | 6 | |
+ +-------------+ |
+ CPU11 | 6 | |
+ +-------------+ |
+ CPU12 | 6 | v
+ +-------------+
+
+The ``psci_non_cpu_pd_nodes`` array will be populated as follows. The value in
+each entry is the index of the parent node.
+
+::
+
+ +-------------+ ^
+ PD0 | -1 | |
+ +-------------+ |
+ PD1 | 0 | |
+ +-------------+ |
+ PD2 | 0 | |
+ +-------------+ |
+ PD3 | 1 | | PLAT_NUM_POWER_DOMAINS -
+ +-------------+ | PLATFORM_CORE_COUNT
+ PD4 | 1 | |
+ +-------------+ |
+ PD5 | 2 | |
+ +-------------+ |
+ PD6 | 2 | |
+ +-------------+ v
+
+Each core can find its node in the ``psci_cpu_pd_nodes`` array using the
+``plat_my_core_pos()`` function. When a core is turned on, the normal world
+provides an MPIDR. The ``plat_core_pos_by_mpidr()`` function is used to validate
+the MPIDR before using it to find the corresponding core node. The non-core power
+domain nodes do not need to be identified.
+
+--------------
+
+*Copyright (c) 2017-2018, Arm Limited and Contributors. All rights reserved.*