diff options
Diffstat (limited to '')
| -rw-r--r-- | docs/plat/hikey.rst | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/docs/plat/hikey.rst b/docs/plat/hikey.rst new file mode 100644 index 0000000..6c488b8 --- /dev/null +++ b/docs/plat/hikey.rst @@ -0,0 +1,155 @@ +HiKey +===== + +HiKey is one of 96boards. Hisilicon Kirin6220 processor is installed on HiKey. + +More information are listed in `link`_. + +How to build +------------ + +Code Locations +~~~~~~~~~~~~~~ + +- Trusted Firmware-A: + `link <https://github.com/ARM-software/arm-trusted-firmware>`__ + +- OP-TEE + `link <https://github.com/OP-TEE/optee_os>`__ + +- edk2: + `link <https://github.com/96boards-hikey/edk2/tree/testing/hikey960_v2.5>`__ + +- OpenPlatformPkg: + `link <https://github.com/96boards-hikey/OpenPlatformPkg/tree/testing/hikey960_v1.3.4>`__ + +- l-loader: + `link <https://github.com/96boards-hikey/l-loader/tree/testing/hikey960_v1.2>`__ + +- atf-fastboot: + `link <https://github.com/96boards-hikey/atf-fastboot/tree/master>`__ + +Build Procedure +~~~~~~~~~~~~~~~ + +- Fetch all the above repositories into local host. + Make all the repositories in the same ${BUILD\_PATH}. + + .. code:: shell + + git clone https://github.com/ARM-software/arm-trusted-firmware -b integration + git clone https://github.com/OP-TEE/optee_os + git clone https://github.com/96boards-hikey/edk2 -b testing/hikey960_v2.5 + git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4 + git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2 + git clone https://github.com/96boards-hikey/atf-fastboot + +- Create the symbol link to OpenPlatformPkg in edk2. + + .. code:: shell + + $cd ${BUILD_PATH}/edk2 + $ln -sf ../OpenPlatformPkg + +- Prepare AARCH64 && AARCH32 toolchain. Prepare python. + +- If your hikey hardware is built by CircuitCo, update *OpenPlatformPkg/Platforms/Hisilicon/HiKey/HiKey.dsc* first. *(optional)* + console on hikey.** + + .. code:: shell + + DEFINE SERIAL_BASE=0xF8015000 + + If your hikey hardware is built by LeMaker, nothing to do. + +- Build it as debug mode. Create your own build script file or you could refer to **build\_uefi.sh** in l-loader git repository. + + .. code:: shell + + cd {BUILD_PATH}/arm-trusted-firmware + sh ../l-loader/build_uefi.sh hikey + +- Generate l-loader.bin and partition table for aosp. The eMMC capacity is either 8GB or 4GB. Just change "aosp-8g" to "linux-8g" for debian. + + .. code:: shell + + cd ${BUILD_PATH}/l-loader + ln -sf ${EDK2_OUTPUT_DIR}/FV/bl1.bin + ln -sf ${EDK2_OUTPUT_DIR}/FV/bl2.bin + ln -sf ${BUILD_PATH}/atf-fastboot/build/hikey/${FASTBOOT_BUILD_OPTION}/bl1.bin fastboot.bin + make hikey PTABLE_LST=aosp-8g + +Setup Console +------------- + +- Install ser2net. Use telnet as the console since UEFI fails to display Boot Manager GUI in minicom. **If you don't need Boot Manager GUI, just ignore this section.** + + .. code:: shell + + $sudo apt-get install ser2net + +- Configure ser2net. + + .. code:: shell + + $sudo vi /etc/ser2net.conf + + Append one line for serial-over-USB in below. + *#ser2net.conf* + + .. code:: shell + + 2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner + +- Start ser2net + + .. code:: shell + + $sudo killall ser2net + $sudo ser2net -u + +- Open the console. + + .. code:: shell + + $telnet localhost 2004 + + And you could open the console remotely, too. + +Flash images in recovery mode +----------------------------- + +- Make sure Pin3-Pin4 on J15 are connected for recovery mode. Then power on HiKey. + +- Remove the modemmanager package. This package may cause the idt tool failure. + + .. code:: shell + + $sudo apt-get purge modemmanager + +- Run the command to download recovery.bin into HiKey. + + .. code:: shell + + $sudo python hisi-idt.py -d /dev/ttyUSB1 --img1 recovery.bin + +- Update images. All aosp or debian images could be fetched from `link <http://releases.linaro.org/96boards/>`__. + + .. code:: shell + + $sudo fastboot flash ptable prm_ptable.img + $sudo fastboot flash loader l-loader.bin + $sudo fastboot flash fastboot fip.bin + $sudo fastboot flash boot boot.img + $sudo fastboot flash cache cache.img + $sudo fastboot flash system system.img + $sudo fastboot flash userdata userdata.img + +Boot UEFI in normal mode +------------------------ + +- Make sure Pin3-Pin4 on J15 are open for normal boot mode. Then power on HiKey. + +- Reference `link <https://github.com/96boards-hikey/tools-images-hikey960/blob/master/build-from-source/README-ATF-UEFI-build-from-source.md>`__ + +.. _link: https://www.96boards.org/documentation/consumer/hikey/ |