summaryrefslogtreecommitdiffstats
path: root/docs/plat/intel-agilex.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/plat/intel-agilex.rst')
-rw-r--r--docs/plat/intel-agilex.rst86
1 files changed, 86 insertions, 0 deletions
diff --git a/docs/plat/intel-agilex.rst b/docs/plat/intel-agilex.rst
new file mode 100644
index 0000000..ff27b6b
--- /dev/null
+++ b/docs/plat/intel-agilex.rst
@@ -0,0 +1,86 @@
+Intel Agilex SoCFPGA
+========================
+
+Agilex SoCFPGA is a FPGA with integrated quad-core 64-bit Arm Cortex A53 processor.
+
+Upon boot, Boot ROM loads bl2 into OCRAM. Bl2 subsequently initializes
+the hardware, then loads bl31 and bl33 (UEFI) into DDR and boots to bl33.
+
+::
+
+ Boot ROM --> Trusted Firmware-A --> UEFI
+
+How to build
+------------
+
+Code Locations
+~~~~~~~~~~~~~~
+
+- Trusted Firmware-A:
+ `link <https://github.com/ARM-software/arm-trusted-firmware>`__
+
+- UEFI (to be updated with new upstreamed UEFI):
+ `link <https://github.com/altera-opensource/uefi-socfpga>`__
+
+Build Procedure
+~~~~~~~~~~~~~~~
+
+- Fetch all the above 2 repositories into local host.
+ Make all the repositories in the same ${BUILD\_PATH}.
+
+- Prepare the AARCH64 toolchain.
+
+- Build UEFI using Agilex platform as configuration
+ This will be updated to use an updated UEFI using the latest EDK2 source
+
+.. code:: bash
+
+ make CROSS_COMPILE=aarch64-linux-gnu- device=agx
+
+- Build atf providing the previously generated UEFI as the BL33 image
+
+.. code:: bash
+
+ make CROSS_COMPILE=aarch64-linux-gnu- bl2 fip PLAT=agilex
+ BL33=PEI.ROM
+
+Install Procedure
+~~~~~~~~~~~~~~~~~
+
+- dd fip.bin to a A2 partition on the MMC drive to be booted in Agilex
+ board.
+
+- Generate a SOF containing bl2
+
+.. code:: bash
+
+ aarch64-linux-gnu-objcopy -I binary -O ihex --change-addresses 0xffe00000 bl2.bin bl2.hex
+ quartus_cpf --bootloader bl2.hex <quartus_generated_sof> <output_sof_with_bl2>
+
+- Configure SOF to board
+
+.. code:: bash
+
+ nios2-configure-sof <output_sof_with_bl2>
+
+Boot trace
+----------
+
+::
+
+ INFO: DDR: DRAM calibration success.
+ INFO: ECC is disabled.
+ NOTICE: BL2: v2.1(debug)
+ NOTICE: BL2: Built
+ INFO: BL2: Doing platform setup
+ NOTICE: BL2: Booting BL31
+ INFO: Entry point address = 0xffe1c000
+ INFO: SPSR = 0x3cd
+ NOTICE: BL31: v2.1(debug)
+ NOTICE: BL31: Built
+ INFO: ARM GICv2 driver initialized
+ INFO: BL31: Initializing runtime services
+ WARNING: BL31: cortex_a53
+ INFO: BL31: Preparing for EL3 exit to normal world
+ INFO: Entry point address = 0x50000
+ INFO: SPSR = 0x3c9