summaryrefslogtreecommitdiffstats
path: root/docs/plat/socionext-uniphier.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/plat/socionext-uniphier.rst')
-rw-r--r--docs/plat/socionext-uniphier.rst116
1 files changed, 116 insertions, 0 deletions
diff --git a/docs/plat/socionext-uniphier.rst b/docs/plat/socionext-uniphier.rst
new file mode 100644
index 0000000..9288193
--- /dev/null
+++ b/docs/plat/socionext-uniphier.rst
@@ -0,0 +1,116 @@
+Socionext UniPhier
+==================
+
+Socionext UniPhier Armv8-A SoCs use Trusted Firmware-A (TF-A) as the secure
+world firmware, supporting BL2 and BL31.
+
+UniPhier SoC family implements its internal boot ROM, which loads 64KB [1]_
+image from a non-volatile storage to the on-chip SRAM, and jumps over to it.
+TF-A provides a special mode, BL2-AT-EL3, which enables BL2 to execute at EL3.
+It is useful for platforms with non-TF-A boot ROM, like UniPhier. Here, a
+problem is BL2 does not fit in the 64KB limit if
+:ref:`Trusted Board Boot (TBB) <Trusted Board Boot>` is enabled.
+To solve this issue, Socionext provides a first stage loader called
+`UniPhier BL`_. This loader runs in the on-chip SRAM, initializes the DRAM,
+expands BL2 there, and hands the control over to it. Therefore, all images
+of TF-A run in DRAM.
+
+The UniPhier platform works with/without TBB. See below for the build process
+of each case. The image authentication for the UniPhier platform fully
+complies with the Trusted Board Boot Requirements (TBBR) specification.
+
+The UniPhier BL does not implement the authentication functionality, that is,
+it can not verify the BL2 image by itself. Instead, the UniPhier BL assures
+the BL2 validity in a different way; BL2 is GZIP-compressed and appended to
+the UniPhier BL. The concatenation of the UniPhier BL and the compressed BL2
+fits in the 64KB limit. The concatenated image is loaded by the internal boot
+ROM (and verified if the chip fuses are blown).
+
+
+Boot Flow
+---------
+
+1. The Boot ROM
+
+ This is hard-wired ROM, so never corrupted. It loads the UniPhier BL (with
+ compressed-BL2 appended) into the on-chip SRAM. If the SoC fuses are blown,
+ the image is verified by the SoC's own method.
+
+2. UniPhier BL
+
+ This runs in the on-chip SRAM. After the minimum SoC initialization and DRAM
+ setup, it decompresses the appended BL2 image into the DRAM, then jumps to
+ the BL2 entry.
+
+3. BL2 (at EL3)
+
+ This runs in the DRAM. It extracts more images such as BL31, BL33 (optionally
+ SCP_BL2, BL32 as well) from Firmware Image Package (FIP). If TBB is enabled,
+ they are all authenticated by the standard mechanism of TF-A.
+ After loading all the images, it jumps to the BL31 entry.
+
+4. BL31, BL32, and BL33
+
+ They all run in the DRAM. See :ref:`Firmware Design` for details.
+
+
+Basic Build
+-----------
+
+BL2 must be compressed for the reason above. The UniPhier's platform makefile
+provides a build target ``bl2_gzip`` for this.
+
+For a non-secure boot loader (aka BL33), U-Boot is well supported for UniPhier
+SoCs. The U-Boot image (``u-boot.bin``) must be built in advance. For the build
+procedure of U-Boot, refer to the document in the `U-Boot`_ project.
+
+To build minimum functionality for UniPhier (without TBB)::
+
+ make CROSS_COMPILE=<gcc-prefix> PLAT=uniphier BL33=<path-to-BL33> bl2_gzip fip
+
+Output images:
+
+- ``bl2.bin.gz``
+- ``fip.bin``
+
+
+Optional features
+-----------------
+
+- Trusted Board Boot
+
+ `mbed TLS`_ is needed as the cryptographic and image parser modules.
+ Refer to the :ref:`Prerequisites` document for the appropriate version of
+ mbed TLS.
+
+ To enable TBB, add the following options to the build command::
+
+ TRUSTED_BOARD_BOOT=1 GENERATE_COT=1 MBEDTLS_DIR=<path-to-mbedtls>
+
+- System Control Processor (SCP)
+
+ If desired, FIP can include an SCP BL2 image. If BL2 finds an SCP BL2 image
+ in FIP, BL2 loads it into DRAM and kicks the SCP. Most of UniPhier boards
+ still work without SCP, but SCP provides better power management support.
+
+ To include SCP BL2, add the following option to the build command::
+
+ SCP_BL2=<path-to-SCP>
+
+- BL32 (Secure Payload)
+
+ To enable BL32, add the following options to the build command::
+
+ SPD=<spd> BL32=<path-to-BL32>
+
+ If you use TSP for BL32, ``BL32=<path-to-BL32>`` is not required. Just add the
+ following::
+
+ SPD=tspd
+
+
+.. [1] Some SoCs can load 80KB, but the software implementation must be aligned
+ to the lowest common denominator.
+.. _UniPhier BL: https://github.com/uniphier/uniphier-bl
+.. _U-Boot: https://www.denx.de/wiki/U-Boot
+.. _mbed TLS: https://tls.mbed.org/