summaryrefslogtreecommitdiffstats
path: root/drivers/arm/ccn/ccn_private.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/arm/ccn/ccn_private.h233
1 files changed, 233 insertions, 0 deletions
diff --git a/drivers/arm/ccn/ccn_private.h b/drivers/arm/ccn/ccn_private.h
new file mode 100644
index 0000000..8a936d9
--- /dev/null
+++ b/drivers/arm/ccn/ccn_private.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CCN_PRIVATE_H
+#define CCN_PRIVATE_H
+
+/*
+ * A CCN implementation can have a maximum of 64 Request nodes with node IDs
+ * from 0-63. These IDs are split across the three types of Request nodes
+ * i.e. RN-F, RN-D and RN-I.
+ */
+#define MAX_RN_NODES 64
+
+/* Enum used to loop through the 3 types of Request nodes */
+typedef enum rn_types {
+ RN_TYPE_RNF = 0,
+ RN_TYPE_RNI,
+ RN_TYPE_RND,
+ NUM_RN_TYPES
+} rn_types_t;
+
+/* Macro to convert a region id to its base address */
+#define region_id_to_base(id) ((id) << 16)
+
+/*
+ * Macro to calculate the number of master interfaces resident on a RN-I/RN-D.
+ * Value of first two bits of the RN-I/D node type + 1 == Maximum number of
+ * ACE-Lite or ACE-Lite+DVM interfaces supported on this node. E.g.
+ *
+ * 0x14 : RN-I with 1 ACE-Lite interface
+ * 0x15 : RN-I with 2 ACE-Lite interfaces
+ * 0x16 : RN-I with 3 ACE-Lite interfaces
+ */
+#define rn_type_id_to_master_cnt(id) (((id) & 0x3) + 1)
+
+/*
+ * Constants used to identify a region in the programmer's view. These are
+ * common for all regions.
+ */
+#define REGION_ID_LIMIT 256
+#define REGION_ID_OFFSET 0xFF00
+
+#define REGION_NODE_ID_SHIFT 8
+#define REGION_NODE_ID_MASK 0x7f
+#define get_node_id(id_reg) (((id_reg) >> REGION_NODE_ID_SHIFT) \
+ & REGION_NODE_ID_MASK)
+
+#define REGION_NODE_TYPE_SHIFT 0
+#define REGION_NODE_TYPE_MASK 0x1f
+#define get_node_type(id_reg) (((id_reg) >> REGION_NODE_TYPE_SHIFT) \
+ & REGION_NODE_TYPE_MASK)
+
+/* Common offsets of registers to enter or exit a snoop/dvm domain */
+#define DOMAIN_CTRL_STAT_OFFSET 0x0200
+#define DOMAIN_CTRL_SET_OFFSET 0x0210
+#define DOMAIN_CTRL_CLR_OFFSET 0x0220
+
+/*
+ * Thess macros are used to determine if an operation to add or remove a Request
+ * node from the snoop/dvm domain has completed. 'rn_id_map' is a bit map of
+ * nodes. It was used to program the SET or CLEAR control register. The type of
+ * register is specified by 'op_reg_offset'. 'status_reg' is the bit map of
+ * nodes currently present in the snoop/dvm domain. 'rn_id_map' and 'status_reg'
+ * are logically ANDed and the result it stored back in the 'status_reg'. There
+ * are two outcomes of this operation:
+ *
+ * 1. If the DOMAIN_CTRL_SET_OFFSET register was programmed, then the set bits in
+ * 'rn_id_map' should appear in 'status_reg' when the operation completes. So
+ * after the AND operation, at some point of time 'status_reg' should equal
+ * 'rn_id_map'.
+ *
+ * 2. If the DOMAIN_CTRL_CLR_OFFSET register was programmed, then the set bits in
+ * 'rn_id_map' should disappear in 'status_reg' when the operation
+ * completes. So after the AND operation, at some point of time 'status_reg'
+ * should equal 0.
+ */
+#define WAIT_FOR_DOMAIN_CTRL_OP_COMPLETION(region_id, stat_reg_offset, \
+ op_reg_offset, rn_id_map) \
+ { \
+ unsigned long long status_reg; \
+ do { \
+ status_reg = ccn_reg_read((ccn_plat_desc->periphbase), \
+ (region_id), \
+ (stat_reg_offset)); \
+ status_reg &= (rn_id_map); \
+ } while ((op_reg_offset) == DOMAIN_CTRL_SET_OFFSET ? \
+ (rn_id_map) != status_reg : status_reg); \
+ }
+
+/*
+ * Region ID of the Miscellaneous Node is always 0 as its located at the base of
+ * the programmer's view.
+ */
+#define MN_REGION_ID 0
+
+#define MN_REGION_ID_START 0
+#define DEBUG_REGION_ID_START 1
+#define HNI_REGION_ID_START 8
+#define SBSX_REGION_ID_START 16
+#define HNF_REGION_ID_START 32
+#define XP_REGION_ID_START 64
+#define RNI_REGION_ID_START 128
+
+/* Selected register offsets from the base of a HNF region */
+#define HNF_CFG_CTRL_OFFSET 0x0000
+#define HNF_SAM_CTRL_OFFSET 0x0008
+#define HNF_PSTATE_REQ_OFFSET 0x0010
+#define HNF_PSTATE_STAT_OFFSET 0x0018
+#define HNF_SDC_STAT_OFFSET DOMAIN_CTRL_STAT_OFFSET
+#define HNF_SDC_SET_OFFSET DOMAIN_CTRL_SET_OFFSET
+#define HNF_SDC_CLR_OFFSET DOMAIN_CTRL_CLR_OFFSET
+#define HNF_AUX_CTRL_OFFSET 0x0500
+
+/* Selected register offsets from the base of a MN region */
+#define MN_SAR_OFFSET 0x0000
+#define MN_RNF_NODEID_OFFSET 0x0180
+#define MN_RNI_NODEID_OFFSET 0x0190
+#define MN_RND_NODEID_OFFSET 0x01A0
+#define MN_HNF_NODEID_OFFSET 0x01B0
+#define MN_HNI_NODEID_OFFSET 0x01C0
+#define MN_SN_NODEID_OFFSET 0x01D0
+#define MN_DDC_STAT_OFFSET DOMAIN_CTRL_STAT_OFFSET
+#define MN_DDC_SET_OFFSET DOMAIN_CTRL_SET_OFFSET
+#define MN_DDC_CLR_OFFSET DOMAIN_CTRL_CLR_OFFSET
+#define MN_PERIPH_ID_0_1_OFFSET 0xFE0
+#define MN_ID_OFFSET REGION_ID_OFFSET
+
+/* HNF System Address Map register bit masks and shifts */
+#define HNF_SAM_CTRL_SN_ID_MASK 0x7f
+#define HNF_SAM_CTRL_SN0_ID_SHIFT 0
+#define HNF_SAM_CTRL_SN1_ID_SHIFT 8
+#define HNF_SAM_CTRL_SN2_ID_SHIFT 16
+
+#define HNF_SAM_CTRL_TAB0_MASK ULL(0x3f)
+#define HNF_SAM_CTRL_TAB0_SHIFT 48
+#define HNF_SAM_CTRL_TAB1_MASK ULL(0x3f)
+#define HNF_SAM_CTRL_TAB1_SHIFT 56
+
+#define HNF_SAM_CTRL_3SN_ENB_SHIFT 32
+#define HNF_SAM_CTRL_3SN_ENB_MASK ULL(0x01)
+
+/*
+ * Macro to create a value suitable for programming into a HNF SAM Control
+ * register for enabling 3SN striping.
+ */
+#define MAKE_HNF_SAM_CTRL_VALUE(sn0, sn1, sn2, tab0, tab1, three_sn_en) \
+ ((((sn0) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN0_ID_SHIFT) | \
+ (((sn1) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN1_ID_SHIFT) | \
+ (((sn2) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN2_ID_SHIFT) | \
+ (((tab0) & HNF_SAM_CTRL_TAB0_MASK) << HNF_SAM_CTRL_TAB0_SHIFT) | \
+ (((tab1) & HNF_SAM_CTRL_TAB1_MASK) << HNF_SAM_CTRL_TAB1_SHIFT) | \
+ (((three_sn_en) & HNF_SAM_CTRL_3SN_ENB_MASK) << HNF_SAM_CTRL_3SN_ENB_SHIFT))
+
+/* Mask to read the power state value from an HN-F P-state register */
+#define HNF_PSTATE_MASK 0xf
+
+/* Macro to extract the run mode from a p-state value */
+#define PSTATE_TO_RUN_MODE(pstate) (((pstate) & HNF_PSTATE_MASK) >> 2)
+
+/*
+ * Helper macro that iterates through a given bit map. In each iteration,
+ * it returns the position of the set bit.
+ * It can be used by other utility macros to iterates through all nodes
+ * or masters given a bit map of them.
+ */
+#define FOR_EACH_BIT(bit_pos, bit_map) \
+ for (bit_pos = __builtin_ctzll(bit_map); \
+ bit_map; \
+ bit_map &= ~(1ULL << (bit_pos)), \
+ bit_pos = __builtin_ctzll(bit_map))
+
+/*
+ * Utility macro that iterates through a bit map of node IDs. In each
+ * iteration, it returns the ID of the next present node in the bit map. Node
+ * ID of a present node == Position of set bit == Number of zeroes trailing the
+ * bit.
+ */
+#define FOR_EACH_PRESENT_NODE_ID(node_id, bit_map) \
+ FOR_EACH_BIT(node_id, bit_map)
+
+/*
+ * Helper function to return number of set bits in bitmap
+ */
+static inline unsigned int count_set_bits(unsigned long long bitmap)
+{
+ unsigned int count = 0;
+
+ for (; bitmap; bitmap &= bitmap - 1)
+ ++count;
+
+ return count;
+}
+
+/*
+ * Utility macro that iterates through a bit map of node IDs. In each iteration,
+ * it returns the ID of the next present region corresponding to a node present
+ * in the bit map. Region ID of a present node is in between passed region id
+ * and region id + number of set bits in the bitmap i.e. the number of present
+ * nodes.
+ */
+#define FOR_EACH_PRESENT_REGION_ID(region_id, bit_map) \
+ for (unsigned long long region_id_limit = count_set_bits(bit_map) \
+ + region_id; \
+ region_id < region_id_limit; \
+ region_id++)
+
+/*
+ * Same macro as FOR_EACH_PRESENT_NODE, but renamed to indicate it traverses
+ * through a bit map of master interfaces.
+ */
+#define FOR_EACH_PRESENT_MASTER_INTERFACE(iface_id, bit_map) \
+ FOR_EACH_BIT(iface_id, bit_map)
+
+/*
+ * Macro that returns the node id bit map for the Miscellaneous Node
+ */
+#define CCN_GET_MN_NODEID_MAP(periphbase) \
+ (1 << get_node_id(ccn_reg_read(periphbase, MN_REGION_ID, \
+ REGION_ID_OFFSET)))
+
+/*
+ * This macro returns the bitmap of Home nodes on the basis of the
+ * 'mn_hn_id_reg_offset' parameter from the Miscellaneous node's (MN)
+ * programmer's view. The MN has a register which carries the bitmap of present
+ * Home nodes of each type i.e. HN-Fs, HN-Is & HN-Ds.
+ */
+#define CCN_GET_HN_NODEID_MAP(periphbase, mn_hn_id_reg_offset) \
+ ccn_reg_read(periphbase, MN_REGION_ID, mn_hn_id_reg_offset)
+
+#endif /* CCN_PRIVATE_H */