diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/brcm/sotp.c | 323 |
1 files changed, 323 insertions, 0 deletions
diff --git a/drivers/brcm/sotp.c b/drivers/brcm/sotp.c new file mode 100644 index 0000000..63c4820 --- /dev/null +++ b/drivers/brcm/sotp.c @@ -0,0 +1,323 @@ +/* + * Copyright (c) 2016-2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <string.h> + +#include <common/debug.h> +#include <lib/mmio.h> +#include <sotp.h> + +#include <platform_def.h> +#include <platform_sotp.h> + +#ifdef USE_SOFT_SOTP +extern uint64_t soft_sotp[]; +#endif + +#define SOTP_PROG_CONTROL (SOTP_REGS_OTP_BASE + 0x0000) +#define SOTP_PROG_CONTROL__OTP_CPU_MODE_EN 15 +#define SOTP_PROG_CONTROL__OTP_DISABLE_ECC 9 +#define SOTP_PROG_CONTROL__OTP_ECC_WREN 8 + +#define SOTP_WRDATA_0 (SOTP_REGS_OTP_BASE + 0x0004) +#define SOTP_WRDATA_1 (SOTP_REGS_OTP_BASE + 0x0008) + +#define SOTP_ADDR (SOTP_REGS_OTP_BASE + 0x000c) +#define SOTP_ADDR__OTP_ROW_ADDR_R 6 +#define SOTP_ADDR_MASK 0x3FF + +#define SOTP_CTRL_0 (SOTP_REGS_OTP_BASE + 0x0010) +#define SOTP_CTRL_0__START 0 +#define SOTP_CTRL_0__OTP_CMD 1 + +#define SOTP_STATUS_0 (SOTP_REGS_OTP_BASE + 0x0018) +#define SOTP_STATUS__FDONE 3 + +#define SOTP_STATUS_1 (SOTP_REGS_OTP_BASE + 0x001c) +#define SOTP_STATUS_1__CMD_DONE 1 +#define SOTP_STATUS_1__ECC_DET 17 + +#define SOTP_RDDATA_0 (SOTP_REGS_OTP_BASE + 0x0020) +#define SOTP_RDDATA_1 (SOTP_REGS_OTP_BASE + 0x0024) + +#define SOTP_READ 0 + +#define SOTP_PROG_WORD 10 +#define SOTP_STATUS__PROGOK 2 +#define SOTP_PROG_ENABLE 2 + +#define SOTP_ROW_DATA_MASK 0xffffffff +#define SOTP_ECC_ERR_BITS_MASK 0x1ff00000000 + +#define SOTP_CHIP_CTRL_SW_OVERRIDE_CHIP_STATES 4 +#define SOTP_CHIP_CTRL_SW_MANU_PROG 5 +#define SOTP_CHIP_CTRL_SW_CID_PROG 6 +#define SOTP_CHIP_CTRL_SW_AB_DEVICE 8 +#define SOTP_CHIP_CTRL_SW_AB_DEV_MODE 9 +#define CHIP_STATE_UNPROGRAMMED 0x1 +#define CHIP_STATE_UNASSIGNED 0x2 + +uint64_t sotp_mem_read(uint32_t offset, uint32_t sotp_add_ecc) +{ +#ifdef USE_SOFT_SOTP + (void)sotp_add_ecc; + + return soft_sotp[offset]; +#else + uint64_t read_data = 0; + uint64_t read_data1 = 0; + uint64_t read_data2 = 0; + + /* Check for FDONE status */ + while ((mmio_read_32(SOTP_STATUS_0) & BIT(SOTP_STATUS__FDONE)) != + BIT(SOTP_STATUS__FDONE)) + ; + + /* Enable OTP access by CPU */ + mmio_setbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN)); + + if (sotp_add_ecc == 1) { + mmio_clrbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_DISABLE_ECC)); + } + + if (sotp_add_ecc == 0) { + mmio_setbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_DISABLE_ECC)); + } + + mmio_write_32(SOTP_ADDR, + ((offset & SOTP_ADDR_MASK) << SOTP_ADDR__OTP_ROW_ADDR_R)); + mmio_write_32(SOTP_CTRL_0, (SOTP_READ << SOTP_CTRL_0__OTP_CMD)); + + /* Start bit to tell SOTP to send command to the OTP controller */ + mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + + /* Wait for SOTP command done to be set */ + while ((mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__CMD_DONE)) != + BIT(SOTP_STATUS_1__CMD_DONE)) + ; + + /* Clr Start bit after command done */ + mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + + if ((offset > SOTP_DEVICE_SECURE_CFG3_ROW) && + (mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__ECC_DET))) { + ERROR("SOTP ECC ERROR Detected row offset %d\n", offset); + read_data = SOTP_ECC_ERR_DETECT; + } else { + read_data1 = (uint64_t)mmio_read_32(SOTP_RDDATA_0); + read_data1 = read_data1 & 0xFFFFFFFF; + read_data2 = (uint64_t)mmio_read_32(SOTP_RDDATA_1); + read_data2 = (read_data2 & 0x1ff) << 32; + read_data = read_data1 | read_data2; + } + + /* Command done is cleared */ + mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE)); + + /* disable OTP access by CPU */ + mmio_clrbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN)); + + return read_data; +#endif +} + +void sotp_mem_write(uint32_t addr, uint32_t sotp_add_ecc, uint64_t wdata) +{ +#ifdef USE_SOFT_SOTP + (void)sotp_add_ecc; + + soft_sotp[addr] = wdata; +#else + uint32_t loop; + uint8_t prog_array[4] = { 0x0F, 0x04, 0x08, 0x0D }; + + uint32_t chip_state_default = + (CHIP_STATE_UNASSIGNED|CHIP_STATE_UNPROGRAMMED); + uint32_t chip_state = mmio_read_32(SOTP_REGS_SOTP_CHIP_STATES); + uint32_t chip_ctrl_default = 0; + + /* + * The override settings is required to allow the customer to program + * the application specific keys into SOTP, before the conversion to + * one of the AB modes. + * At the end of write operation, the chip ctrl settings will restored + * to the state prior to write call + */ + if (chip_state & chip_state_default) { + uint32_t chip_ctrl; + + chip_ctrl_default = mmio_read_32(SOTP_CHIP_CTRL); + INFO("SOTP: enable special prog mode\n"); + + chip_ctrl = BIT(SOTP_CHIP_CTRL_SW_OVERRIDE_CHIP_STATES) | + BIT(SOTP_CHIP_CTRL_SW_MANU_PROG) | + BIT(SOTP_CHIP_CTRL_SW_CID_PROG) | + BIT(SOTP_CHIP_CTRL_SW_AB_DEVICE); + mmio_write_32(SOTP_CHIP_CTRL, chip_ctrl); + } + + /* Check for FDONE status */ + while ((mmio_read_32(SOTP_STATUS_0) & BIT(SOTP_STATUS__FDONE)) != + BIT(SOTP_STATUS__FDONE)) + ; + + /* Enable OTP acces by CPU */ + mmio_setbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN)); + + if (addr > SOTP_DEVICE_SECURE_CFG3_ROW) { + if (sotp_add_ecc == 0) { + mmio_clrbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN)); + } + if (sotp_add_ecc == 1) { + mmio_setbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN)); + } + } else { + mmio_clrbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN)); + } + + mmio_write_32(SOTP_CTRL_0, (SOTP_PROG_ENABLE << 1)); + + /* + * In order to avoid unintentional writes / programming of the OTP + * array, the OTP Controller must be put into programming mode before + * it will accept program commands. This is done by writing 0xF, 0x4, + * 0x8, 0xD with program commands prior to starting the actual + * programming sequence + */ + for (loop = 0; loop < 4; loop++) { + mmio_write_32(SOTP_WRDATA_0, prog_array[loop]); + + /* + * Start bit to tell SOTP to send command to the OTP controller + */ + mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + + /* Wait for SOTP command done to <-- be set */ + while ((mmio_read_32(SOTP_STATUS_1) & + BIT(SOTP_STATUS_1__CMD_DONE)) != + BIT(SOTP_STATUS_1__CMD_DONE)) + ; + + /* Command done is cleared w1c */ + mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE)); + + /* Clr Start bit after command done */ + mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + } + + /* Check for PROGOK */ + while ((mmio_read_32(SOTP_STATUS_0) & 0x4) != BIT(SOTP_STATUS__PROGOK)) + ; + + /* Set 10 bit row address */ + mmio_write_32(SOTP_ADDR, + ((addr & SOTP_ADDR_MASK) << SOTP_ADDR__OTP_ROW_ADDR_R)); + + /* Set SOTP Row data */ + mmio_write_32(SOTP_WRDATA_0, (wdata & SOTP_ROW_DATA_MASK)); + + /* Set SOTP ECC and error bits */ + mmio_write_32(SOTP_WRDATA_1, ((wdata & SOTP_ECC_ERR_BITS_MASK) >> 32)); + + /* Set prog_word command */ + mmio_write_32(SOTP_CTRL_0, (SOTP_PROG_WORD << 1)); + + /* Start bit to tell SOTP to send command to the OTP controller */ + mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + + /* Wait for SOTP command done to be set */ + while ((mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__CMD_DONE)) != + BIT(SOTP_STATUS_1__CMD_DONE)) + ; + + /* Command done is cleared w1c */ + mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE)); + + /* disable OTP acces by CPU */ + mmio_clrbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN)); + + /* Clr Start bit after command done */ + mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + + if (chip_state & chip_state_default) + mmio_write_32(SOTP_CHIP_CTRL, chip_ctrl_default); + +#endif +} + +int sotp_read_key(uint8_t *key, size_t keysize, int start_row, int end_row) +{ + int row; + uint32_t status = 0; + uint32_t status2 = 0xFFFFFFFF; + uint64_t row_data; + uint32_t data; + uint32_t *temp_key = (uint32_t *)key; + + row = start_row; + while ((keysize > 0) && (row <= end_row)) { + row_data = sotp_mem_read(row, SOTP_ROW_ECC); + if (!(row_data & (SOTP_ECC_ERR_DETECT | SOTP_FAIL_BITS))) { + memcpy(temp_key++, &row_data, sizeof(uint32_t)); + keysize -= sizeof(uint32_t); + data = (uint32_t)(row_data & SOTP_ROW_DATA_MASK); + status |= data; + status2 &= data; + } + row++; + } + + if ((status2 == 0xFFFFFFFF) || (status == 0) || (row > end_row)) + return -1; + + return 0; +} + +int sotp_key_erased(void) +{ + uint64_t row_data; + int status = 0; + + row_data = sotp_mem_read(SOTP_DEVICE_SECURE_CFG0_ROW, 0); + if (row_data & SOTP_DEVICE_SECURE_CFG0_OTP_ERASED_MASK) + status = 1; + + else if (mmio_read_32(SOTP_REGS_SOTP_CHIP_STATES) & + SOTP_REGS_SOTP_CHIP_STATES_OTP_ERASED_MASK) + status = 1; + + return status; +} + +/* + * This function optimise the SOTP redundancy + * by considering the 00- zero and 01,10,11 - one + */ +uint32_t sotp_redundancy_reduction(uint32_t sotp_row_data) +{ + uint32_t opt_data; + uint32_t opt_loop; + uint32_t temp_data; + + opt_data = 0; + + for (opt_loop = 0; opt_loop < 16; opt_loop = opt_loop + 1) { + temp_data = ((sotp_row_data >> (opt_loop * 2)) & 0x3); + + if (temp_data != 0x0) + opt_data = (opt_data | (1 << opt_loop)); + } + return opt_data; +} |