summaryrefslogtreecommitdiffstats
path: root/drivers/brcm/sotp.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/brcm/sotp.c323
1 files changed, 323 insertions, 0 deletions
diff --git a/drivers/brcm/sotp.c b/drivers/brcm/sotp.c
new file mode 100644
index 0000000..63c4820
--- /dev/null
+++ b/drivers/brcm/sotp.c
@@ -0,0 +1,323 @@
+/*
+ * Copyright (c) 2016-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <string.h>
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <sotp.h>
+
+#include <platform_def.h>
+#include <platform_sotp.h>
+
+#ifdef USE_SOFT_SOTP
+extern uint64_t soft_sotp[];
+#endif
+
+#define SOTP_PROG_CONTROL (SOTP_REGS_OTP_BASE + 0x0000)
+#define SOTP_PROG_CONTROL__OTP_CPU_MODE_EN 15
+#define SOTP_PROG_CONTROL__OTP_DISABLE_ECC 9
+#define SOTP_PROG_CONTROL__OTP_ECC_WREN 8
+
+#define SOTP_WRDATA_0 (SOTP_REGS_OTP_BASE + 0x0004)
+#define SOTP_WRDATA_1 (SOTP_REGS_OTP_BASE + 0x0008)
+
+#define SOTP_ADDR (SOTP_REGS_OTP_BASE + 0x000c)
+#define SOTP_ADDR__OTP_ROW_ADDR_R 6
+#define SOTP_ADDR_MASK 0x3FF
+
+#define SOTP_CTRL_0 (SOTP_REGS_OTP_BASE + 0x0010)
+#define SOTP_CTRL_0__START 0
+#define SOTP_CTRL_0__OTP_CMD 1
+
+#define SOTP_STATUS_0 (SOTP_REGS_OTP_BASE + 0x0018)
+#define SOTP_STATUS__FDONE 3
+
+#define SOTP_STATUS_1 (SOTP_REGS_OTP_BASE + 0x001c)
+#define SOTP_STATUS_1__CMD_DONE 1
+#define SOTP_STATUS_1__ECC_DET 17
+
+#define SOTP_RDDATA_0 (SOTP_REGS_OTP_BASE + 0x0020)
+#define SOTP_RDDATA_1 (SOTP_REGS_OTP_BASE + 0x0024)
+
+#define SOTP_READ 0
+
+#define SOTP_PROG_WORD 10
+#define SOTP_STATUS__PROGOK 2
+#define SOTP_PROG_ENABLE 2
+
+#define SOTP_ROW_DATA_MASK 0xffffffff
+#define SOTP_ECC_ERR_BITS_MASK 0x1ff00000000
+
+#define SOTP_CHIP_CTRL_SW_OVERRIDE_CHIP_STATES 4
+#define SOTP_CHIP_CTRL_SW_MANU_PROG 5
+#define SOTP_CHIP_CTRL_SW_CID_PROG 6
+#define SOTP_CHIP_CTRL_SW_AB_DEVICE 8
+#define SOTP_CHIP_CTRL_SW_AB_DEV_MODE 9
+#define CHIP_STATE_UNPROGRAMMED 0x1
+#define CHIP_STATE_UNASSIGNED 0x2
+
+uint64_t sotp_mem_read(uint32_t offset, uint32_t sotp_add_ecc)
+{
+#ifdef USE_SOFT_SOTP
+ (void)sotp_add_ecc;
+
+ return soft_sotp[offset];
+#else
+ uint64_t read_data = 0;
+ uint64_t read_data1 = 0;
+ uint64_t read_data2 = 0;
+
+ /* Check for FDONE status */
+ while ((mmio_read_32(SOTP_STATUS_0) & BIT(SOTP_STATUS__FDONE)) !=
+ BIT(SOTP_STATUS__FDONE))
+ ;
+
+ /* Enable OTP access by CPU */
+ mmio_setbits_32(SOTP_PROG_CONTROL,
+ BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN));
+
+ if (sotp_add_ecc == 1) {
+ mmio_clrbits_32(SOTP_PROG_CONTROL,
+ BIT(SOTP_PROG_CONTROL__OTP_DISABLE_ECC));
+ }
+
+ if (sotp_add_ecc == 0) {
+ mmio_setbits_32(SOTP_PROG_CONTROL,
+ BIT(SOTP_PROG_CONTROL__OTP_DISABLE_ECC));
+ }
+
+ mmio_write_32(SOTP_ADDR,
+ ((offset & SOTP_ADDR_MASK) << SOTP_ADDR__OTP_ROW_ADDR_R));
+ mmio_write_32(SOTP_CTRL_0, (SOTP_READ << SOTP_CTRL_0__OTP_CMD));
+
+ /* Start bit to tell SOTP to send command to the OTP controller */
+ mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+
+ /* Wait for SOTP command done to be set */
+ while ((mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__CMD_DONE)) !=
+ BIT(SOTP_STATUS_1__CMD_DONE))
+ ;
+
+ /* Clr Start bit after command done */
+ mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+
+ if ((offset > SOTP_DEVICE_SECURE_CFG3_ROW) &&
+ (mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__ECC_DET))) {
+ ERROR("SOTP ECC ERROR Detected row offset %d\n", offset);
+ read_data = SOTP_ECC_ERR_DETECT;
+ } else {
+ read_data1 = (uint64_t)mmio_read_32(SOTP_RDDATA_0);
+ read_data1 = read_data1 & 0xFFFFFFFF;
+ read_data2 = (uint64_t)mmio_read_32(SOTP_RDDATA_1);
+ read_data2 = (read_data2 & 0x1ff) << 32;
+ read_data = read_data1 | read_data2;
+ }
+
+ /* Command done is cleared */
+ mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE));
+
+ /* disable OTP access by CPU */
+ mmio_clrbits_32(SOTP_PROG_CONTROL,
+ BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN));
+
+ return read_data;
+#endif
+}
+
+void sotp_mem_write(uint32_t addr, uint32_t sotp_add_ecc, uint64_t wdata)
+{
+#ifdef USE_SOFT_SOTP
+ (void)sotp_add_ecc;
+
+ soft_sotp[addr] = wdata;
+#else
+ uint32_t loop;
+ uint8_t prog_array[4] = { 0x0F, 0x04, 0x08, 0x0D };
+
+ uint32_t chip_state_default =
+ (CHIP_STATE_UNASSIGNED|CHIP_STATE_UNPROGRAMMED);
+ uint32_t chip_state = mmio_read_32(SOTP_REGS_SOTP_CHIP_STATES);
+ uint32_t chip_ctrl_default = 0;
+
+ /*
+ * The override settings is required to allow the customer to program
+ * the application specific keys into SOTP, before the conversion to
+ * one of the AB modes.
+ * At the end of write operation, the chip ctrl settings will restored
+ * to the state prior to write call
+ */
+ if (chip_state & chip_state_default) {
+ uint32_t chip_ctrl;
+
+ chip_ctrl_default = mmio_read_32(SOTP_CHIP_CTRL);
+ INFO("SOTP: enable special prog mode\n");
+
+ chip_ctrl = BIT(SOTP_CHIP_CTRL_SW_OVERRIDE_CHIP_STATES) |
+ BIT(SOTP_CHIP_CTRL_SW_MANU_PROG) |
+ BIT(SOTP_CHIP_CTRL_SW_CID_PROG) |
+ BIT(SOTP_CHIP_CTRL_SW_AB_DEVICE);
+ mmio_write_32(SOTP_CHIP_CTRL, chip_ctrl);
+ }
+
+ /* Check for FDONE status */
+ while ((mmio_read_32(SOTP_STATUS_0) & BIT(SOTP_STATUS__FDONE)) !=
+ BIT(SOTP_STATUS__FDONE))
+ ;
+
+ /* Enable OTP acces by CPU */
+ mmio_setbits_32(SOTP_PROG_CONTROL,
+ BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN));
+
+ if (addr > SOTP_DEVICE_SECURE_CFG3_ROW) {
+ if (sotp_add_ecc == 0) {
+ mmio_clrbits_32(SOTP_PROG_CONTROL,
+ BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN));
+ }
+ if (sotp_add_ecc == 1) {
+ mmio_setbits_32(SOTP_PROG_CONTROL,
+ BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN));
+ }
+ } else {
+ mmio_clrbits_32(SOTP_PROG_CONTROL,
+ BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN));
+ }
+
+ mmio_write_32(SOTP_CTRL_0, (SOTP_PROG_ENABLE << 1));
+
+ /*
+ * In order to avoid unintentional writes / programming of the OTP
+ * array, the OTP Controller must be put into programming mode before
+ * it will accept program commands. This is done by writing 0xF, 0x4,
+ * 0x8, 0xD with program commands prior to starting the actual
+ * programming sequence
+ */
+ for (loop = 0; loop < 4; loop++) {
+ mmio_write_32(SOTP_WRDATA_0, prog_array[loop]);
+
+ /*
+ * Start bit to tell SOTP to send command to the OTP controller
+ */
+ mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+
+ /* Wait for SOTP command done to <-- be set */
+ while ((mmio_read_32(SOTP_STATUS_1) &
+ BIT(SOTP_STATUS_1__CMD_DONE)) !=
+ BIT(SOTP_STATUS_1__CMD_DONE))
+ ;
+
+ /* Command done is cleared w1c */
+ mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE));
+
+ /* Clr Start bit after command done */
+ mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+ }
+
+ /* Check for PROGOK */
+ while ((mmio_read_32(SOTP_STATUS_0) & 0x4) != BIT(SOTP_STATUS__PROGOK))
+ ;
+
+ /* Set 10 bit row address */
+ mmio_write_32(SOTP_ADDR,
+ ((addr & SOTP_ADDR_MASK) << SOTP_ADDR__OTP_ROW_ADDR_R));
+
+ /* Set SOTP Row data */
+ mmio_write_32(SOTP_WRDATA_0, (wdata & SOTP_ROW_DATA_MASK));
+
+ /* Set SOTP ECC and error bits */
+ mmio_write_32(SOTP_WRDATA_1, ((wdata & SOTP_ECC_ERR_BITS_MASK) >> 32));
+
+ /* Set prog_word command */
+ mmio_write_32(SOTP_CTRL_0, (SOTP_PROG_WORD << 1));
+
+ /* Start bit to tell SOTP to send command to the OTP controller */
+ mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+
+ /* Wait for SOTP command done to be set */
+ while ((mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__CMD_DONE)) !=
+ BIT(SOTP_STATUS_1__CMD_DONE))
+ ;
+
+ /* Command done is cleared w1c */
+ mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE));
+
+ /* disable OTP acces by CPU */
+ mmio_clrbits_32(SOTP_PROG_CONTROL,
+ BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN));
+
+ /* Clr Start bit after command done */
+ mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+
+ if (chip_state & chip_state_default)
+ mmio_write_32(SOTP_CHIP_CTRL, chip_ctrl_default);
+
+#endif
+}
+
+int sotp_read_key(uint8_t *key, size_t keysize, int start_row, int end_row)
+{
+ int row;
+ uint32_t status = 0;
+ uint32_t status2 = 0xFFFFFFFF;
+ uint64_t row_data;
+ uint32_t data;
+ uint32_t *temp_key = (uint32_t *)key;
+
+ row = start_row;
+ while ((keysize > 0) && (row <= end_row)) {
+ row_data = sotp_mem_read(row, SOTP_ROW_ECC);
+ if (!(row_data & (SOTP_ECC_ERR_DETECT | SOTP_FAIL_BITS))) {
+ memcpy(temp_key++, &row_data, sizeof(uint32_t));
+ keysize -= sizeof(uint32_t);
+ data = (uint32_t)(row_data & SOTP_ROW_DATA_MASK);
+ status |= data;
+ status2 &= data;
+ }
+ row++;
+ }
+
+ if ((status2 == 0xFFFFFFFF) || (status == 0) || (row > end_row))
+ return -1;
+
+ return 0;
+}
+
+int sotp_key_erased(void)
+{
+ uint64_t row_data;
+ int status = 0;
+
+ row_data = sotp_mem_read(SOTP_DEVICE_SECURE_CFG0_ROW, 0);
+ if (row_data & SOTP_DEVICE_SECURE_CFG0_OTP_ERASED_MASK)
+ status = 1;
+
+ else if (mmio_read_32(SOTP_REGS_SOTP_CHIP_STATES) &
+ SOTP_REGS_SOTP_CHIP_STATES_OTP_ERASED_MASK)
+ status = 1;
+
+ return status;
+}
+
+/*
+ * This function optimise the SOTP redundancy
+ * by considering the 00- zero and 01,10,11 - one
+ */
+uint32_t sotp_redundancy_reduction(uint32_t sotp_row_data)
+{
+ uint32_t opt_data;
+ uint32_t opt_loop;
+ uint32_t temp_data;
+
+ opt_data = 0;
+
+ for (opt_loop = 0; opt_loop < 16; opt_loop = opt_loop + 1) {
+ temp_data = ((sotp_row_data >> (opt_loop * 2)) & 0x3);
+
+ if (temp_data != 0x0)
+ opt_data = (opt_data | (1 << opt_loop));
+ }
+ return opt_data;
+}