summaryrefslogtreecommitdiffstats
path: root/drivers/brcm/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/brcm/spi')
-rw-r--r--drivers/brcm/spi/iproc_qspi.c317
-rw-r--r--drivers/brcm/spi/iproc_qspi.h107
-rw-r--r--drivers/brcm/spi/iproc_spi.c31
3 files changed, 455 insertions, 0 deletions
diff --git a/drivers/brcm/spi/iproc_qspi.c b/drivers/brcm/spi/iproc_qspi.c
new file mode 100644
index 0000000..4c533d5
--- /dev/null
+++ b/drivers/brcm/spi/iproc_qspi.c
@@ -0,0 +1,317 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <string.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <endian.h>
+#include <lib/mmio.h>
+
+#include <platform_def.h>
+#include <spi.h>
+
+#include "iproc_qspi.h"
+
+struct bcmspi_priv spi_cfg;
+
+/* Redefined by platform to force appropriate information */
+#pragma weak plat_spi_init
+int plat_spi_init(uint32_t *max_hz)
+{
+ return 0;
+}
+
+/* Initialize & setup iproc qspi controller */
+int iproc_qspi_setup(uint32_t bus, uint32_t cs, uint32_t max_hz, uint32_t mode)
+{
+ struct bcmspi_priv *priv = NULL;
+ uint32_t spbr;
+
+ priv = &spi_cfg;
+ priv->spi_mode = mode;
+ priv->state = QSPI_STATE_DISABLED;
+ priv->bspi_hw = QSPI_BSPI_MODE_REG_BASE;
+ priv->mspi_hw = QSPI_MSPI_MODE_REG_BASE;
+
+ /* Initialize clock and platform specific */
+ if (plat_spi_init(&max_hz) != 0)
+ return -1;
+
+ priv->max_hz = max_hz;
+
+ /* MSPI: Basic hardware initialization */
+ mmio_write_32(priv->mspi_hw + MSPI_SPCR1_LSB_REG, 0);
+ mmio_write_32(priv->mspi_hw + MSPI_SPCR1_MSB_REG, 0);
+ mmio_write_32(priv->mspi_hw + MSPI_NEWQP_REG, 0);
+ mmio_write_32(priv->mspi_hw + MSPI_ENDQP_REG, 0);
+ mmio_write_32(priv->mspi_hw + MSPI_SPCR2_REG, 0);
+
+ /* MSPI: SCK configuration */
+ spbr = (QSPI_AXI_CLK - 1) / (2 * priv->max_hz) + 1;
+ spbr = MIN(spbr, SPBR_DIV_MAX);
+ spbr = MAX(spbr, SPBR_DIV_MIN);
+ mmio_write_32(priv->mspi_hw + MSPI_SPCR0_LSB_REG, spbr);
+
+ /* MSPI: Mode configuration (8 bits by default) */
+ priv->mspi_16bit = 0;
+ mmio_write_32(priv->mspi_hw + MSPI_SPCR0_MSB_REG,
+ BIT(MSPI_SPCR0_MSB_REG_MSTR_SHIFT) | /* Master */
+ MSPI_SPCR0_MSB_REG_16_BITS_PER_WD_SHIFT | /* 16 bits per word */
+ (priv->spi_mode & MSPI_SPCR0_MSB_REG_MODE_MASK)); /* mode: CPOL / CPHA */
+
+ /* Display bus info */
+ VERBOSE("SPI: SPCR0_LSB: 0x%x\n",
+ mmio_read_32(priv->mspi_hw + MSPI_SPCR0_LSB_REG));
+ VERBOSE("SPI: SPCR0_MSB: 0x%x\n",
+ mmio_read_32(priv->mspi_hw + MSPI_SPCR0_MSB_REG));
+ VERBOSE("SPI: SPCR1_LSB: 0x%x\n",
+ mmio_read_32(priv->mspi_hw + MSPI_SPCR1_LSB_REG));
+ VERBOSE("SPI: SPCR1_MSB: 0x%x\n",
+ mmio_read_32(priv->mspi_hw + MSPI_SPCR1_MSB_REG));
+ VERBOSE("SPI: SPCR2: 0x%x\n",
+ mmio_read_32(priv->mspi_hw + MSPI_SPCR2_REG));
+ VERBOSE("SPI: CLK: %d\n", priv->max_hz);
+
+ return 0;
+}
+
+void bcmspi_enable_bspi(struct bcmspi_priv *priv)
+{
+ if (priv->state != QSPI_STATE_BSPI) {
+ /* Switch to BSPI */
+ mmio_write_32(priv->bspi_hw + BSPI_MAST_N_BOOT_CTRL_REG, 0);
+
+ priv->state = QSPI_STATE_BSPI;
+ }
+}
+
+static int bcmspi_disable_bspi(struct bcmspi_priv *priv)
+{
+ uint32_t retry;
+
+ if (priv->state == QSPI_STATE_MSPI)
+ return 0;
+
+ /* Switch to MSPI if not yet */
+ if ((mmio_read_32(priv->bspi_hw + BSPI_MAST_N_BOOT_CTRL_REG) &
+ MSPI_CTRL_MASK) == 0) {
+ retry = QSPI_RETRY_COUNT_US_MAX;
+ do {
+ if ((mmio_read_32(
+ priv->bspi_hw + BSPI_BUSY_STATUS_REG) &
+ BSPI_BUSY_MASK) == 0) {
+ mmio_write_32(priv->bspi_hw +
+ BSPI_MAST_N_BOOT_CTRL_REG,
+ MSPI_CTRL_MASK);
+ udelay(1);
+ break;
+ }
+ udelay(1);
+ } while (retry--);
+
+ if ((mmio_read_32(priv->bspi_hw + BSPI_MAST_N_BOOT_CTRL_REG) &
+ MSPI_CTRL_MASK) != MSPI_CTRL_MASK) {
+ ERROR("QSPI: Switching to QSPI error.\n");
+ return -1;
+ }
+ }
+
+ /* Update state */
+ priv->state = QSPI_STATE_MSPI;
+
+ return 0;
+}
+
+int iproc_qspi_claim_bus(void)
+{
+ struct bcmspi_priv *priv = &spi_cfg;
+
+ /* Switch to MSPI by default */
+ if (bcmspi_disable_bspi(priv) != 0)
+ return -1;
+
+ return 0;
+}
+
+void iproc_qspi_release_bus(void)
+{
+ struct bcmspi_priv *priv = &spi_cfg;
+
+ /* Switch to BSPI by default */
+ bcmspi_enable_bspi(priv);
+}
+
+static int mspi_xfer(struct bcmspi_priv *priv, uint32_t bytes,
+ const uint8_t *tx, uint8_t *rx, uint32_t flag)
+{
+ uint32_t retry;
+ uint32_t mode = CDRAM_PCS0;
+
+ if (flag & SPI_XFER_QUAD) {
+ mode |= CDRAM_QUAD_MODE;
+ VERBOSE("SPI: QUAD mode\n");
+
+ if (!tx) {
+ VERBOSE("SPI: 4 lane input\n");
+ mode |= CDRAM_RBIT_INPUT;
+ }
+ }
+
+ /* Use 8-bit queue for odd-bytes transfer */
+ if (bytes & 1)
+ priv->mspi_16bit = 0;
+ else {
+ priv->mspi_16bit = 1;
+ mode |= CDRAM_BITS_EN;
+ }
+
+ while (bytes) {
+ uint32_t chunk;
+ uint32_t queues;
+ uint32_t i;
+
+ /* Separate code for 16bit and 8bit transfers for performance */
+ if (priv->mspi_16bit) {
+ VERBOSE("SPI: 16 bits xfer\n");
+ /* Determine how many bytes to process this time */
+ chunk = MIN(bytes, NUM_CDRAM_BYTES * 2);
+ queues = (chunk - 1) / 2 + 1;
+ bytes -= chunk;
+
+ /* Fill CDRAMs */
+ for (i = 0; i < queues; i++)
+ mmio_write_32(priv->mspi_hw + MSPI_CDRAM_REG +
+ (i << 2), mode | CDRAM_CONT);
+
+ /* Fill TXRAMs */
+ for (i = 0; i < chunk; i++)
+ if (tx)
+ mmio_write_32(priv->mspi_hw +
+ MSPI_TXRAM_REG +
+ (i << 2), tx[i]);
+ } else {
+ VERBOSE("SPI: 8 bits xfer\n");
+ /* Determine how many bytes to process this time */
+ chunk = MIN(bytes, NUM_CDRAM_BYTES);
+ queues = chunk;
+ bytes -= chunk;
+
+ /* Fill CDRAMs and TXRAMS */
+ for (i = 0; i < chunk; i++) {
+ mmio_write_32(priv->mspi_hw + MSPI_CDRAM_REG +
+ (i << 2), mode | CDRAM_CONT);
+ if (tx)
+ mmio_write_32(priv->mspi_hw +
+ MSPI_TXRAM_REG +
+ (i << 3), tx[i]);
+ }
+ }
+
+ /* Advance pointers */
+ if (tx)
+ tx += chunk;
+
+ /* Setup queue pointers */
+ mmio_write_32(priv->mspi_hw + MSPI_NEWQP_REG, 0);
+ mmio_write_32(priv->mspi_hw + MSPI_ENDQP_REG, queues - 1);
+
+ /* Remove CONT on the last byte command */
+ if (bytes == 0 && (flag & SPI_XFER_END))
+ mmio_write_32(priv->mspi_hw + MSPI_CDRAM_REG +
+ ((queues - 1) << 2), mode);
+
+ /* Kick off */
+ mmio_write_32(priv->mspi_hw + MSPI_STATUS_REG, 0);
+ if (bytes == 0 && (flag & SPI_XFER_END))
+ mmio_write_32(priv->mspi_hw + MSPI_SPCR2_REG, MSPI_SPE);
+ else
+ mmio_write_32(priv->mspi_hw + MSPI_SPCR2_REG,
+ MSPI_SPE | MSPI_CONT_AFTER_CMD);
+
+ /* Wait for completion */
+ retry = QSPI_RETRY_COUNT_US_MAX;
+ do {
+ if (mmio_read_32(priv->mspi_hw + MSPI_STATUS_REG) &
+ MSPI_CMD_COMPLETE_MASK)
+ break;
+ udelay(1);
+ } while (retry--);
+
+ if ((mmio_read_32(priv->mspi_hw + MSPI_STATUS_REG) &
+ MSPI_CMD_COMPLETE_MASK) == 0) {
+ ERROR("SPI: Completion timeout.\n");
+ return -1;
+ }
+
+ /* Read data out */
+ if (rx) {
+ if (priv->mspi_16bit) {
+ for (i = 0; i < chunk; i++) {
+ rx[i] = mmio_read_32(priv->mspi_hw +
+ MSPI_RXRAM_REG +
+ (i << 2))
+ & 0xff;
+ }
+ } else {
+ for (i = 0; i < chunk; i++) {
+ rx[i] = mmio_read_32(priv->mspi_hw +
+ MSPI_RXRAM_REG +
+ (((i << 1) + 1) << 2))
+ & 0xff;
+ }
+ }
+ rx += chunk;
+ }
+ }
+
+ return 0;
+}
+
+int iproc_qspi_xfer(uint32_t bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct bcmspi_priv *priv;
+ const uint8_t *tx = dout;
+ uint8_t *rx = din;
+ uint32_t bytes = bitlen / 8;
+ int ret = 0;
+
+ priv = &spi_cfg;
+
+ if (priv->state == QSPI_STATE_DISABLED) {
+ ERROR("QSPI: state disabled\n");
+ return -1;
+ }
+
+ /* we can only do 8 bit transfers */
+ if (bitlen % 8) {
+ ERROR("QSPI: Only support 8 bit transfers (requested %d)\n",
+ bitlen);
+ return -1;
+ }
+
+ /* MSPI: Enable write lock at the beginning */
+ if (flags & SPI_XFER_BEGIN) {
+ /* Switch to MSPI if not yet */
+ if (bcmspi_disable_bspi(priv) != 0) {
+ ERROR("QSPI: Switch to MSPI failed\n");
+ return -1;
+ }
+
+ mmio_write_32(priv->mspi_hw + MSPI_WRITE_LOCK_REG, 1);
+ }
+
+ /* MSPI: Transfer it */
+ if (bytes)
+ ret = mspi_xfer(priv, bytes, tx, rx, flags);
+
+ /* MSPI: Disable write lock if it's done */
+ if (flags & SPI_XFER_END)
+ mmio_write_32(priv->mspi_hw + MSPI_WRITE_LOCK_REG, 0);
+
+ return ret;
+}
diff --git a/drivers/brcm/spi/iproc_qspi.h b/drivers/brcm/spi/iproc_qspi.h
new file mode 100644
index 0000000..7a8bd91
--- /dev/null
+++ b/drivers/brcm/spi/iproc_qspi.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IPROC_QSPI_H
+#define IPROC_QSPI_H
+
+#include <platform_def.h>
+
+/*SPI configuration enable*/
+#define IPROC_QSPI_CLK_SPEED 62500000
+#define SPI_CPHA (1 << 0)
+#define SPI_CPOL (1 << 1)
+#define IPROC_QSPI_MODE0 0
+#define IPROC_QSPI_MODE3 (SPI_CPOL|SPI_CPHA)
+
+#define IPROC_QSPI_BUS 0
+#define IPROC_QSPI_CS 0
+#define IPROC_QSPI_BASE_REG QSPI_CTRL_BASE_ADDR
+#define IPROC_QSPI_CRU_CONTROL_REG QSPI_CLK_CTRL
+
+#define QSPI_AXI_CLK 200000000
+
+#define QSPI_RETRY_COUNT_US_MAX 200000
+
+/* Chip attributes */
+#define QSPI_REG_BASE IPROC_QSPI_BASE_REG
+#define CRU_CONTROL_REG IPROC_QSPI_CRU_CONTROL_REG
+#define SPBR_DIV_MIN 8U
+#define SPBR_DIV_MAX 255U
+#define NUM_CDRAM_BYTES 16U
+
+/* Register fields */
+#define MSPI_SPCR0_MSB_BITS_8 0x00000020
+
+/* Flash opcode and parameters */
+#define CDRAM_PCS0 2
+#define CDRAM_CONT (1 << 7)
+#define CDRAM_BITS_EN (1 << 6)
+#define CDRAM_QUAD_MODE (1 << 8)
+#define CDRAM_RBIT_INPUT (1 << 10)
+
+/* MSPI registers */
+#define QSPI_MSPI_MODE_REG_BASE (QSPI_REG_BASE + 0x200)
+#define MSPI_SPCR0_LSB_REG 0x000
+#define MSPI_SPCR0_MSB_REG 0x004
+#define MSPI_SPCR1_LSB_REG 0x008
+#define MSPI_SPCR1_MSB_REG 0x00c
+#define MSPI_NEWQP_REG 0x010
+#define MSPI_ENDQP_REG 0x014
+#define MSPI_SPCR2_REG 0x018
+#define MSPI_STATUS_REG 0x020
+#define MSPI_CPTQP_REG 0x024
+#define MSPI_TXRAM_REG 0x040
+#define MSPI_RXRAM_REG 0x0c0
+#define MSPI_CDRAM_REG 0x140
+#define MSPI_WRITE_LOCK_REG 0x180
+#define MSPI_DISABLE_FLUSH_GEN_REG 0x184
+
+#define MSPI_SPCR0_MSB_REG_MSTR_SHIFT 7
+#define MSPI_SPCR0_MSB_REG_16_BITS_PER_WD_SHIFT (0 << 2)
+#define MSPI_SPCR0_MSB_REG_MODE_MASK 0x3
+
+/* BSPI registers */
+#define QSPI_BSPI_MODE_REG_BASE QSPI_REG_BASE
+#define BSPI_MAST_N_BOOT_CTRL_REG 0x008
+#define BSPI_BUSY_STATUS_REG 0x00c
+
+#define MSPI_CMD_COMPLETE_MASK 1
+#define BSPI_BUSY_MASK 1
+#define MSPI_CTRL_MASK 1
+
+#define MSPI_SPE (1 << 6)
+#define MSPI_CONT_AFTER_CMD (1 << 7)
+
+/* State */
+enum bcm_qspi_state {
+ QSPI_STATE_DISABLED,
+ QSPI_STATE_MSPI,
+ QSPI_STATE_BSPI
+};
+
+/* QSPI private data */
+struct bcmspi_priv {
+ /* Specified SPI parameters */
+ uint32_t max_hz;
+ uint32_t spi_mode;
+
+ /* State */
+ enum bcm_qspi_state state;
+ int mspi_16bit;
+
+ /* Registers */
+ uintptr_t mspi_hw;
+ uintptr_t bspi_hw;
+};
+
+int iproc_qspi_setup(uint32_t bus, uint32_t cs,
+ uint32_t max_hz, uint32_t mode);
+int iproc_qspi_claim_bus(void);
+void iproc_qspi_release_bus(void);
+int iproc_qspi_xfer(uint32_t bitlen, const void *dout,
+ void *din, unsigned long flags);
+
+#endif /* _IPROC_QSPI_H_ */
diff --git a/drivers/brcm/spi/iproc_spi.c b/drivers/brcm/spi/iproc_spi.c
new file mode 100644
index 0000000..551e587
--- /dev/null
+++ b/drivers/brcm/spi/iproc_spi.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <spi.h>
+
+#include "iproc_qspi.h"
+
+int spi_init(void)
+{
+ return iproc_qspi_setup(IPROC_QSPI_BUS, IPROC_QSPI_CS,
+ IPROC_QSPI_CLK_SPEED, IPROC_QSPI_MODE0);
+}
+
+int spi_claim_bus(void)
+{
+ return iproc_qspi_claim_bus();
+}
+
+void spi_release_bus(void)
+{
+ iproc_qspi_release_bus();
+}
+
+int spi_xfer(uint32_t bitlen, const void *dout,
+ void *din, uint32_t flags)
+{
+ return iproc_qspi_xfer(bitlen, dout, din, flags);
+}