summaryrefslogtreecommitdiffstats
path: root/drivers/marvell/comphy/phy-comphy-3700.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/marvell/comphy/phy-comphy-3700.c1065
1 files changed, 1065 insertions, 0 deletions
diff --git a/drivers/marvell/comphy/phy-comphy-3700.c b/drivers/marvell/comphy/phy-comphy-3700.c
new file mode 100644
index 0000000..1a97753
--- /dev/null
+++ b/drivers/marvell/comphy/phy-comphy-3700.c
@@ -0,0 +1,1065 @@
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+#include <lib/spinlock.h>
+
+#include <mvebu.h>
+#include <mvebu_def.h>
+#include <plat_marvell.h>
+
+#include "phy-comphy-3700.h"
+#include "phy-comphy-common.h"
+
+/*
+ * COMPHY_INDIRECT_REG points to ahci address space but the ahci region used in
+ * Linux is up to 0x178 so none will access it from Linux in runtime
+ * concurrently.
+ */
+#define COMPHY_INDIRECT_REG (MVEBU_REGS_BASE + 0xE0178)
+
+/* The USB3_GBE1_PHY range is above USB3 registers used in dts */
+#define USB3_GBE1_PHY (MVEBU_REGS_BASE + 0x5C000)
+#define COMPHY_SD_ADDR (MVEBU_REGS_BASE + 0x1F000)
+
+struct sgmii_phy_init_data_fix {
+ uint16_t addr;
+ uint16_t value;
+};
+
+/* Changes to 40M1G25 mode data required for running 40M3G125 init mode */
+static struct sgmii_phy_init_data_fix sgmii_phy_init_fix[] = {
+ {0x005, 0x07CC}, {0x015, 0x0000}, {0x01B, 0x0000}, {0x01D, 0x0000},
+ {0x01E, 0x0000}, {0x01F, 0x0000}, {0x020, 0x0000}, {0x021, 0x0030},
+ {0x026, 0x0888}, {0x04D, 0x0152}, {0x04F, 0xA020}, {0x050, 0x07CC},
+ {0x053, 0xE9CA}, {0x055, 0xBD97}, {0x071, 0x3015}, {0x076, 0x03AA},
+ {0x07C, 0x0FDF}, {0x0C2, 0x3030}, {0x0C3, 0x8000}, {0x0E2, 0x5550},
+ {0x0E3, 0x12A4}, {0x0E4, 0x7D00}, {0x0E6, 0x0C83}, {0x101, 0xFCC0},
+ {0x104, 0x0C10}
+};
+
+/* 40M1G25 mode init data */
+static uint16_t sgmii_phy_init[512] = {
+ /* 0 1 2 3 4 5 6 7 */
+ /*-----------------------------------------------------------*/
+ /* 8 9 A B C D E F */
+ 0x3110, 0xFD83, 0x6430, 0x412F, 0x82C0, 0x06FA, 0x4500, 0x6D26, /* 00 */
+ 0xAFC0, 0x8000, 0xC000, 0x0000, 0x2000, 0x49CC, 0x0BC9, 0x2A52, /* 08 */
+ 0x0BD2, 0x0CDE, 0x13D2, 0x0CE8, 0x1149, 0x10E0, 0x0000, 0x0000, /* 10 */
+ 0x0000, 0x0000, 0x0000, 0x0001, 0x0000, 0x4134, 0x0D2D, 0xFFFF, /* 18 */
+ 0xFFE0, 0x4030, 0x1016, 0x0030, 0x0000, 0x0800, 0x0866, 0x0000, /* 20 */
+ 0x0000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, /* 28 */
+ 0xFFFF, 0xFFFF, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */
+ 0x0000, 0x0000, 0x000F, 0x6A62, 0x1988, 0x3100, 0x3100, 0x3100, /* 38 */
+ 0x3100, 0xA708, 0x2430, 0x0830, 0x1030, 0x4610, 0xFF00, 0xFF00, /* 40 */
+ 0x0060, 0x1000, 0x0400, 0x0040, 0x00F0, 0x0155, 0x1100, 0xA02A, /* 48 */
+ 0x06FA, 0x0080, 0xB008, 0xE3ED, 0x5002, 0xB592, 0x7A80, 0x0001, /* 50 */
+ 0x020A, 0x8820, 0x6014, 0x8054, 0xACAA, 0xFC88, 0x2A02, 0x45CF, /* 58 */
+ 0x000F, 0x1817, 0x2860, 0x064F, 0x0000, 0x0204, 0x1800, 0x6000, /* 60 */
+ 0x810F, 0x4F23, 0x4000, 0x4498, 0x0850, 0x0000, 0x000E, 0x1002, /* 68 */
+ 0x9D3A, 0x3009, 0xD066, 0x0491, 0x0001, 0x6AB0, 0x0399, 0x3780, /* 70 */
+ 0x0040, 0x5AC0, 0x4A80, 0x0000, 0x01DF, 0x0000, 0x0007, 0x0000, /* 78 */
+ 0x2D54, 0x00A1, 0x4000, 0x0100, 0xA20A, 0x0000, 0x0000, 0x0000, /* 80 */
+ 0x0000, 0x0000, 0x0000, 0x7400, 0x0E81, 0x1000, 0x1242, 0x0210, /* 88 */
+ 0x80DF, 0x0F1F, 0x2F3F, 0x4F5F, 0x6F7F, 0x0F1F, 0x2F3F, 0x4F5F, /* 90 */
+ 0x6F7F, 0x4BAD, 0x0000, 0x0000, 0x0800, 0x0000, 0x2400, 0xB651, /* 98 */
+ 0xC9E0, 0x4247, 0x0A24, 0x0000, 0xAF19, 0x1004, 0x0000, 0x0000, /* A0 */
+ 0x0000, 0x0013, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* A8 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* B0 */
+ 0x0000, 0x0000, 0x0000, 0x0060, 0x0000, 0x0000, 0x0000, 0x0000, /* B8 */
+ 0x0000, 0x0000, 0x3010, 0xFA00, 0x0000, 0x0000, 0x0000, 0x0003, /* C0 */
+ 0x1618, 0x8200, 0x8000, 0x0400, 0x050F, 0x0000, 0x0000, 0x0000, /* C8 */
+ 0x4C93, 0x0000, 0x1000, 0x1120, 0x0010, 0x1242, 0x1242, 0x1E00, /* D0 */
+ 0x0000, 0x0000, 0x0000, 0x00F8, 0x0000, 0x0041, 0x0800, 0x0000, /* D8 */
+ 0x82A0, 0x572E, 0x2490, 0x14A9, 0x4E00, 0x0000, 0x0803, 0x0541, /* E0 */
+ 0x0C15, 0x0000, 0x0000, 0x0400, 0x2626, 0x0000, 0x0000, 0x4200, /* E8 */
+ 0x0000, 0xAA55, 0x1020, 0x0000, 0x0000, 0x5010, 0x0000, 0x0000, /* F0 */
+ 0x0000, 0x0000, 0x5000, 0x0000, 0x0000, 0x0000, 0x02F2, 0x0000, /* F8 */
+ 0x101F, 0xFDC0, 0x4000, 0x8010, 0x0110, 0x0006, 0x0000, 0x0000, /*100 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*108 */
+ 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04C6, 0x0000, /*110 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*118 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*120 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*128 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*130 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*138 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*140 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*148 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*150 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*158 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*160 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*168 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*170 */
+ 0x0000, 0x0000, 0x0000, 0x00F0, 0x08A2, 0x3112, 0x0A14, 0x0000, /*178 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*180 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*188 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*190 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*198 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A0 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A8 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B0 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B8 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C0 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C8 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D0 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D8 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E0 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E8 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1F0 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 /*1F8 */
+};
+
+/* PHY selector configures with corresponding modes */
+static int mvebu_a3700_comphy_set_phy_selector(uint8_t comphy_index,
+ uint32_t comphy_mode)
+{
+ uint32_t reg;
+ int mode = COMPHY_GET_MODE(comphy_mode);
+
+ reg = mmio_read_32(MVEBU_COMPHY_REG_BASE + COMPHY_SELECTOR_PHY_REG);
+ switch (mode) {
+ case (COMPHY_SATA_MODE):
+ /* SATA must be in Lane2 */
+ if (comphy_index == COMPHY_LANE2)
+ reg &= ~COMPHY_SELECTOR_USB3_PHY_SEL_BIT;
+ else
+ goto error;
+ break;
+
+ case (COMPHY_SGMII_MODE):
+ case (COMPHY_2500BASEX_MODE):
+ if (comphy_index == COMPHY_LANE0)
+ reg &= ~COMPHY_SELECTOR_USB3_GBE1_SEL_BIT;
+ else if (comphy_index == COMPHY_LANE1)
+ reg &= ~COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT;
+ else
+ goto error;
+ break;
+
+ case (COMPHY_USB3H_MODE):
+ case (COMPHY_USB3D_MODE):
+ case (COMPHY_USB3_MODE):
+ if (comphy_index == COMPHY_LANE2)
+ reg |= COMPHY_SELECTOR_USB3_PHY_SEL_BIT;
+ else if (comphy_index == COMPHY_LANE0)
+ reg |= COMPHY_SELECTOR_USB3_GBE1_SEL_BIT;
+ else
+ goto error;
+ break;
+
+ case (COMPHY_PCIE_MODE):
+ /* PCIE must be in Lane1 */
+ if (comphy_index == COMPHY_LANE1)
+ reg |= COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT;
+ else
+ goto error;
+ break;
+
+ default:
+ goto error;
+ }
+
+ mmio_write_32(MVEBU_COMPHY_REG_BASE + COMPHY_SELECTOR_PHY_REG, reg);
+ return 0;
+error:
+ ERROR("COMPHY[%d] mode[%d] is invalid\n", comphy_index, mode);
+ return -EINVAL;
+}
+
+/*
+ * This is something like the inverse of the previous function: for given
+ * lane it returns COMPHY_*_MODE.
+ *
+ * It is useful when powering the phy off.
+ *
+ * This function returns COMPHY_USB3_MODE even if the phy was configured
+ * with COMPHY_USB3D_MODE or COMPHY_USB3H_MODE. (The usb3 phy initialization
+ * code does not differentiate between these modes.)
+ * Also it returns COMPHY_SGMII_MODE even if the phy was configures with
+ * COMPHY_2500BASEX_MODE. (The sgmii phy initialization code does differentiate
+ * between these modes, but it is irrelevant when powering the phy off.)
+ */
+static int mvebu_a3700_comphy_get_mode(uint8_t comphy_index)
+{
+ uint32_t reg;
+
+ reg = mmio_read_32(MVEBU_COMPHY_REG_BASE + COMPHY_SELECTOR_PHY_REG);
+ switch (comphy_index) {
+ case COMPHY_LANE0:
+ if ((reg & COMPHY_SELECTOR_USB3_GBE1_SEL_BIT) != 0)
+ return COMPHY_USB3_MODE;
+ else
+ return COMPHY_SGMII_MODE;
+ case COMPHY_LANE1:
+ if ((reg & COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT) != 0)
+ return COMPHY_PCIE_MODE;
+ else
+ return COMPHY_SGMII_MODE;
+ case COMPHY_LANE2:
+ if ((reg & COMPHY_SELECTOR_USB3_PHY_SEL_BIT) != 0)
+ return COMPHY_USB3_MODE;
+ else
+ return COMPHY_SATA_MODE;
+ }
+
+ return COMPHY_UNUSED;
+}
+
+/* It is only used for SATA and USB3 on comphy lane2. */
+static void comphy_set_indirect(uintptr_t addr, uint32_t offset, uint16_t data,
+ uint16_t mask, bool is_sata)
+{
+ /*
+ * When Lane 2 PHY is for USB3, access the PHY registers
+ * through indirect Address and Data registers:
+ * INDIR_ACC_PHY_ADDR (RD00E0178h [31:0]),
+ * INDIR_ACC_PHY_DATA (RD00E017Ch [31:0]),
+ * within the SATA Host Controller registers, Lane 2 base register
+ * offset is 0x200
+ */
+ if (is_sata) {
+ mmio_write_32(addr + COMPHY_LANE2_INDIR_ADDR_OFFSET, offset);
+ } else {
+ mmio_write_32(addr + COMPHY_LANE2_INDIR_ADDR_OFFSET,
+ offset + USB3PHY_LANE2_REG_BASE_OFFSET);
+ }
+
+ reg_set(addr + COMPHY_LANE2_INDIR_DATA_OFFSET, data, mask);
+}
+
+/* It is only used for SATA on comphy lane2. */
+static void comphy_sata_set_indirect(uintptr_t addr, uint32_t reg_offset,
+ uint16_t data, uint16_t mask)
+{
+ comphy_set_indirect(addr, reg_offset, data, mask, true);
+}
+
+/* It is only used for USB3 indirect access on comphy lane2. */
+static void comphy_usb3_set_indirect(uintptr_t addr, uint32_t reg_offset,
+ uint16_t data, uint16_t mask)
+{
+ comphy_set_indirect(addr, reg_offset, data, mask, false);
+}
+
+/* It is only used for USB3 direct access not on comphy lane2. */
+static void comphy_usb3_set_direct(uintptr_t addr, uint32_t reg_offset,
+ uint16_t data, uint16_t mask)
+{
+ reg_set16((reg_offset * PHY_SHFT(USB3) + addr), data, mask);
+}
+
+static void comphy_sgmii_phy_init(uintptr_t sd_ip_addr, bool is_1gbps)
+{
+ const int fix_arr_sz = ARRAY_SIZE(sgmii_phy_init_fix);
+ int addr, fix_idx;
+ uint16_t val;
+
+ fix_idx = 0;
+ for (addr = 0; addr < 512; addr++) {
+ /*
+ * All PHY register values are defined in full for 3.125Gbps
+ * SERDES speed. The values required for 1.25 Gbps are almost
+ * the same and only few registers should be "fixed" in
+ * comparison to 3.125 Gbps values. These register values are
+ * stored in "sgmii_phy_init_fix" array.
+ */
+ if (!is_1gbps && sgmii_phy_init_fix[fix_idx].addr == addr) {
+ /* Use new value */
+ val = sgmii_phy_init_fix[fix_idx].value;
+ if (fix_idx < fix_arr_sz)
+ fix_idx++;
+ } else {
+ val = sgmii_phy_init[addr];
+ }
+
+ reg_set16(SGMIIPHY_ADDR(addr, sd_ip_addr), val, 0xFFFF);
+ }
+}
+
+static int mvebu_a3700_comphy_sata_power_on(uint8_t comphy_index,
+ uint32_t comphy_mode)
+{
+ int ret;
+ uint32_t offset, data = 0, ref_clk;
+ uintptr_t comphy_indir_regs = COMPHY_INDIRECT_REG;
+ int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
+
+ debug_enter();
+
+ /* Configure phy selector for SATA */
+ ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+ if (ret) {
+ return ret;
+ }
+
+ /* Clear phy isolation mode to make it work in normal mode */
+ offset = COMPHY_ISOLATION_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
+ comphy_sata_set_indirect(comphy_indir_regs, offset, 0, PHY_ISOLATE_MODE);
+
+ /* 0. Check the Polarity invert bits */
+ if (invert & COMPHY_POLARITY_TXD_INVERT)
+ data |= TXD_INVERT_BIT;
+ if (invert & COMPHY_POLARITY_RXD_INVERT)
+ data |= RXD_INVERT_BIT;
+
+ offset = COMPHY_SYNC_PATTERN + SATAPHY_LANE2_REG_BASE_OFFSET;
+ comphy_sata_set_indirect(comphy_indir_regs, offset, data, TXD_INVERT_BIT |
+ RXD_INVERT_BIT);
+
+ /* 1. Select 40-bit data width width */
+ offset = COMPHY_DIG_LOOPBACK_EN + SATAPHY_LANE2_REG_BASE_OFFSET;
+ comphy_sata_set_indirect(comphy_indir_regs, offset, DATA_WIDTH_40BIT,
+ SEL_DATA_WIDTH_MASK);
+
+ /* 2. Select reference clock(25M) and PHY mode (SATA) */
+ offset = COMPHY_POWER_PLL_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
+ if (get_ref_clk() == 40)
+ ref_clk = REF_FREF_SEL_SERDES_40MHZ;
+ else
+ ref_clk = REF_FREF_SEL_SERDES_25MHZ;
+
+ comphy_sata_set_indirect(comphy_indir_regs, offset, ref_clk | PHY_MODE_SATA,
+ REF_FREF_SEL_MASK | PHY_MODE_MASK);
+
+ /* 3. Use maximum PLL rate (no power save) */
+ offset = COMPHY_KVCO_CAL_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
+ comphy_sata_set_indirect(comphy_indir_regs, offset, USE_MAX_PLL_RATE_BIT,
+ USE_MAX_PLL_RATE_BIT);
+
+ /* 4. Reset reserved bit */
+ comphy_sata_set_indirect(comphy_indir_regs, COMPHY_RESERVED_REG, 0,
+ PHYCTRL_FRM_PIN_BIT);
+
+ /* 5. Set vendor-specific configuration (It is done in sata driver) */
+ /* XXX: in U-Boot below sequence was executed in this place, in Linux
+ * not. Now it is done only in U-Boot before this comphy
+ * initialization - tests shows that it works ok, but in case of any
+ * future problem it is left for reference.
+ * reg_set(MVEBU_REGS_BASE + 0xe00a0, 0, 0xffffffff);
+ * reg_set(MVEBU_REGS_BASE + 0xe00a4, BIT(6), BIT(6));
+ */
+
+ /* Wait for > 55 us to allow PLL be enabled */
+ udelay(PLL_SET_DELAY_US);
+
+ /* Polling status */
+ mmio_write_32(comphy_indir_regs + COMPHY_LANE2_INDIR_ADDR_OFFSET,
+ COMPHY_DIG_LOOPBACK_EN + SATAPHY_LANE2_REG_BASE_OFFSET);
+
+ ret = polling_with_timeout(comphy_indir_regs +
+ COMPHY_LANE2_INDIR_DATA_OFFSET,
+ PLL_READY_TX_BIT, PLL_READY_TX_BIT,
+ COMPHY_PLL_TIMEOUT, REG_32BIT);
+ if (ret) {
+ return -ETIMEDOUT;
+ }
+
+ debug_exit();
+
+ return 0;
+}
+
+static int mvebu_a3700_comphy_sgmii_power_on(uint8_t comphy_index,
+ uint32_t comphy_mode)
+{
+ int ret;
+ uint32_t mask, data;
+ uintptr_t offset;
+ uintptr_t sd_ip_addr;
+ int mode = COMPHY_GET_MODE(comphy_mode);
+ int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
+
+ debug_enter();
+
+ /* Set selector */
+ ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+ if (ret) {
+ return ret;
+ }
+
+ /* Serdes IP Base address
+ * COMPHY Lane0 -- USB3/GBE1
+ * COMPHY Lane1 -- PCIe/GBE0
+ */
+ if (comphy_index == COMPHY_LANE0) {
+ /* Get usb3 and gbe */
+ sd_ip_addr = USB3_GBE1_PHY;
+ } else
+ sd_ip_addr = COMPHY_SD_ADDR;
+
+ /*
+ * 1. Reset PHY by setting PHY input port PIN_RESET=1.
+ * 2. Set PHY input port PIN_TX_IDLE=1, PIN_PU_IVREF=1 to keep
+ * PHY TXP/TXN output to idle state during PHY initialization
+ * 3. Set PHY input port PIN_PU_PLL=0, PIN_PU_RX=0, PIN_PU_TX=0.
+ */
+ data = PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT | PIN_RESET_COMPHY_BIT;
+ mask = data | PIN_RESET_CORE_BIT | PIN_PU_PLL_BIT | PIN_PU_RX_BIT |
+ PIN_PU_TX_BIT;
+ offset = MVEBU_COMPHY_REG_BASE + COMPHY_PHY_CFG1_OFFSET(comphy_index);
+ reg_set(offset, data, mask);
+
+ /* 4. Release reset to the PHY by setting PIN_RESET=0. */
+ data = 0;
+ mask = PIN_RESET_COMPHY_BIT;
+ reg_set(offset, data, mask);
+
+ /*
+ * 5. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide COMPHY
+ * bit rate
+ */
+ if (mode == COMPHY_SGMII_MODE) {
+ /* SGMII 1G, SerDes speed 1.25G */
+ data |= SD_SPEED_1_25_G << GEN_RX_SEL_OFFSET;
+ data |= SD_SPEED_1_25_G << GEN_TX_SEL_OFFSET;
+ } else if (mode == COMPHY_2500BASEX_MODE) {
+ /* 2500Base-X, SerDes speed 3.125G */
+ data |= SD_SPEED_3_125_G << GEN_RX_SEL_OFFSET;
+ data |= SD_SPEED_3_125_G << GEN_TX_SEL_OFFSET;
+ } else {
+ /* Other rates are not supported */
+ ERROR("unsupported SGMII speed on comphy lane%d\n",
+ comphy_index);
+ return -EINVAL;
+ }
+ mask = GEN_RX_SEL_MASK | GEN_TX_SEL_MASK;
+ reg_set(offset, data, mask);
+
+ /*
+ * 6. Wait 10mS for bandgap and reference clocks to stabilize; then
+ * start SW programming.
+ */
+ mdelay(10);
+
+ /* 7. Program COMPHY register PHY_MODE */
+ data = PHY_MODE_SGMII;
+ mask = PHY_MODE_MASK;
+ reg_set16(SGMIIPHY_ADDR(COMPHY_POWER_PLL_CTRL, sd_ip_addr), data, mask);
+
+ /*
+ * 8. Set COMPHY register REFCLK_SEL to select the correct REFCLK
+ * source
+ */
+ data = 0;
+ mask = PHY_REF_CLK_SEL;
+ reg_set16(SGMIIPHY_ADDR(COMPHY_MISC_CTRL0, sd_ip_addr), data, mask);
+
+ /*
+ * 9. Set correct reference clock frequency in COMPHY register
+ * REF_FREF_SEL.
+ */
+ if (get_ref_clk() == 40)
+ data = REF_FREF_SEL_SERDES_50MHZ;
+ else
+ data = REF_FREF_SEL_SERDES_25MHZ;
+
+ mask = REF_FREF_SEL_MASK;
+ reg_set16(SGMIIPHY_ADDR(COMPHY_POWER_PLL_CTRL, sd_ip_addr), data, mask);
+
+ /* 10. Program COMPHY register PHY_GEN_MAX[1:0]
+ * This step is mentioned in the flow received from verification team.
+ * However the PHY_GEN_MAX value is only meaningful for other interfaces
+ * (not SGMII). For instance, it selects SATA speed 1.5/3/6 Gbps or PCIe
+ * speed 2.5/5 Gbps
+ */
+
+ /*
+ * 11. Program COMPHY register SEL_BITS to set correct parallel data
+ * bus width
+ */
+ data = DATA_WIDTH_10BIT;
+ mask = SEL_DATA_WIDTH_MASK;
+ reg_set16(SGMIIPHY_ADDR(COMPHY_DIG_LOOPBACK_EN, sd_ip_addr),
+ data, mask);
+
+ /*
+ * 12. As long as DFE function needs to be enabled in any mode,
+ * COMPHY register DFE_UPDATE_EN[5:0] shall be programmed to 0x3F
+ * for real chip during COMPHY power on.
+ * The step 14 exists (and empty) in the original initialization flow
+ * obtained from the verification team. According to the functional
+ * specification DFE_UPDATE_EN already has the default value 0x3F
+ */
+
+ /*
+ * 13. Program COMPHY GEN registers.
+ * These registers should be programmed based on the lab testing result
+ * to achieve optimal performance. Please contact the CEA group to get
+ * the related GEN table during real chip bring-up. We only required to
+ * run though the entire registers programming flow defined by
+ * "comphy_sgmii_phy_init" when the REF clock is 40 MHz. For REF clock
+ * 25 MHz the default values stored in PHY registers are OK.
+ */
+ debug("Running C-DPI phy init %s mode\n",
+ mode == COMPHY_2500BASEX_MODE ? "2G5" : "1G");
+ if (get_ref_clk() == 40)
+ comphy_sgmii_phy_init(sd_ip_addr, mode != COMPHY_2500BASEX_MODE);
+
+ /*
+ * 14. [Simulation Only] should not be used for real chip.
+ * By pass power up calibration by programming EXT_FORCE_CAL_DONE
+ * (R02h[9]) to 1 to shorten COMPHY simulation time.
+ */
+
+ /*
+ * 15. [Simulation Only: should not be used for real chip]
+ * Program COMPHY register FAST_DFE_TIMER_EN=1 to shorten RX training
+ * simulation time.
+ */
+
+ /*
+ * 16. Check the PHY Polarity invert bit
+ */
+ data = 0x0;
+ if (invert & COMPHY_POLARITY_TXD_INVERT)
+ data |= TXD_INVERT_BIT;
+ if (invert & COMPHY_POLARITY_RXD_INVERT)
+ data |= RXD_INVERT_BIT;
+ mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
+ reg_set16(SGMIIPHY_ADDR(COMPHY_SYNC_PATTERN, sd_ip_addr), data, mask);
+
+ /*
+ * 17. Set PHY input ports PIN_PU_PLL, PIN_PU_TX and PIN_PU_RX to 1 to
+ * start PHY power up sequence. All the PHY register programming should
+ * be done before PIN_PU_PLL=1. There should be no register programming
+ * for normal PHY operation from this point.
+ */
+ reg_set(MVEBU_COMPHY_REG_BASE + COMPHY_PHY_CFG1_OFFSET(comphy_index),
+ PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT,
+ PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT);
+
+ /*
+ * 18. Wait for PHY power up sequence to finish by checking output ports
+ * PIN_PLL_READY_TX=1 and PIN_PLL_READY_RX=1.
+ */
+ ret = polling_with_timeout(MVEBU_COMPHY_REG_BASE +
+ COMPHY_PHY_STATUS_OFFSET(comphy_index),
+ PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
+ PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
+ COMPHY_PLL_TIMEOUT, REG_32BIT);
+ if (ret) {
+ ERROR("Failed to lock PLL for SGMII PHY %d\n", comphy_index);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * 19. Set COMPHY input port PIN_TX_IDLE=0
+ */
+ reg_set(MVEBU_COMPHY_REG_BASE + COMPHY_PHY_CFG1_OFFSET(comphy_index),
+ 0x0, PIN_TX_IDLE_BIT);
+
+ /*
+ * 20. After valid data appear on PIN_RXDATA bus, set PIN_RX_INIT=1. To
+ * start RX initialization. PIN_RX_INIT_DONE will be cleared to 0 by the
+ * PHY After RX initialization is done, PIN_RX_INIT_DONE will be set to
+ * 1 by COMPHY Set PIN_RX_INIT=0 after PIN_RX_INIT_DONE= 1. Please
+ * refer to RX initialization part for details.
+ */
+ reg_set(MVEBU_COMPHY_REG_BASE + COMPHY_PHY_CFG1_OFFSET(comphy_index),
+ PHY_RX_INIT_BIT, PHY_RX_INIT_BIT);
+
+ ret = polling_with_timeout(MVEBU_COMPHY_REG_BASE +
+ COMPHY_PHY_STATUS_OFFSET(comphy_index),
+ PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
+ PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
+ COMPHY_PLL_TIMEOUT, REG_32BIT);
+ if (ret) {
+ ERROR("Failed to lock PLL for SGMII PHY %d\n", comphy_index);
+ return -ETIMEDOUT;
+ }
+
+ ret = polling_with_timeout(MVEBU_COMPHY_REG_BASE +
+ COMPHY_PHY_STATUS_OFFSET(comphy_index),
+ PHY_RX_INIT_DONE_BIT, PHY_RX_INIT_DONE_BIT,
+ COMPHY_PLL_TIMEOUT, REG_32BIT);
+ if (ret) {
+ ERROR("Failed to init RX of SGMII PHY %d\n", comphy_index);
+ return -ETIMEDOUT;
+ }
+
+ debug_exit();
+
+ return 0;
+}
+
+static int mvebu_a3700_comphy_sgmii_power_off(uint8_t comphy_index)
+{
+ uintptr_t offset;
+ uint32_t mask, data;
+
+ debug_enter();
+
+ data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT;
+ mask = data;
+ offset = MVEBU_COMPHY_REG_BASE + COMPHY_PHY_CFG1_OFFSET(comphy_index);
+ reg_set(offset, data, mask);
+
+ debug_exit();
+
+ return 0;
+}
+
+static int mvebu_a3700_comphy_usb3_power_on(uint8_t comphy_index,
+ uint32_t comphy_mode)
+{
+ int ret;
+ uintptr_t reg_base = 0;
+ uintptr_t addr;
+ uint32_t mask, data, cfg, ref_clk;
+ void (*usb3_reg_set)(uintptr_t addr, uint32_t reg_offset, uint16_t data,
+ uint16_t mask);
+ int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
+
+ debug_enter();
+
+ /* Set phy seclector */
+ ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+ if (ret) {
+ return ret;
+ }
+
+ /* Set usb3 reg access func, Lane2 is indirect access */
+ if (comphy_index == COMPHY_LANE2) {
+ usb3_reg_set = &comphy_usb3_set_indirect;
+ reg_base = COMPHY_INDIRECT_REG;
+ } else {
+ /* Get the direct access register resource and map */
+ usb3_reg_set = &comphy_usb3_set_direct;
+ reg_base = USB3_GBE1_PHY;
+ }
+
+ /*
+ * 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The
+ * register belong to UTMI module, so it is set in UTMI phy driver.
+ */
+
+ /*
+ * 1. Set PRD_TXDEEMPH (3.5db de-emph)
+ */
+ mask = PRD_TXDEEMPH0_MASK | PRD_TXMARGIN_MASK | PRD_TXSWING_MASK |
+ CFG_TX_ALIGN_POS_MASK;
+ usb3_reg_set(reg_base, COMPHY_LANE_CFG0, PRD_TXDEEMPH0_MASK, mask);
+
+ /*
+ * 2. Set BIT0: enable transmitter in high impedance mode
+ * Set BIT[3:4]: delay 2 clock cycles for HiZ off latency
+ * Set BIT6: Tx detect Rx at HiZ mode
+ * Unset BIT15: set to 0 to set USB3 De-emphasize level to -3.5db
+ * together with bit 0 of COMPHY_LANE_CFG0 register
+ */
+ mask = PRD_TXDEEMPH1_MASK | TX_DET_RX_MODE | GEN2_TX_DATA_DLY_MASK |
+ TX_ELEC_IDLE_MODE_EN;
+ data = TX_DET_RX_MODE | GEN2_TX_DATA_DLY_DEFT | TX_ELEC_IDLE_MODE_EN;
+ usb3_reg_set(reg_base, COMPHY_LANE_CFG1, data, mask);
+
+ /*
+ * 3. Set Spread Spectrum Clock Enabled
+ */
+ usb3_reg_set(reg_base, COMPHY_LANE_CFG4,
+ SPREAD_SPECTRUM_CLK_EN, SPREAD_SPECTRUM_CLK_EN);
+
+ /*
+ * 4. Set Override Margining Controls From the MAC:
+ * Use margining signals from lane configuration
+ */
+ usb3_reg_set(reg_base, COMPHY_TEST_MODE_CTRL,
+ MODE_MARGIN_OVERRIDE, REG_16_BIT_MASK);
+
+ /*
+ * 5. Set Lane-to-Lane Bundle Clock Sampling Period = per PCLK cycles
+ * set Mode Clock Source = PCLK is generated from REFCLK
+ */
+ usb3_reg_set(reg_base, COMPHY_CLK_SRC_LO, 0x0,
+ (MODE_CLK_SRC | BUNDLE_PERIOD_SEL |
+ BUNDLE_PERIOD_SCALE_MASK | BUNDLE_SAMPLE_CTRL |
+ PLL_READY_DLY_MASK));
+
+ /*
+ * 6. Set G2 Spread Spectrum Clock Amplitude at 4K
+ */
+ usb3_reg_set(reg_base, COMPHY_GEN2_SET2,
+ GS2_TX_SSC_AMP_VALUE_20, GS2_TX_SSC_AMP_MASK);
+
+ /*
+ * 7. Unset G3 Spread Spectrum Clock Amplitude
+ * set G3 TX and RX Register Master Current Select
+ */
+ mask = GS2_TX_SSC_AMP_MASK | GS2_VREG_RXTX_MAS_ISET_MASK |
+ GS2_RSVD_6_0_MASK;
+ usb3_reg_set(reg_base, COMPHY_GEN3_SET2,
+ GS2_VREG_RXTX_MAS_ISET_60U, mask);
+
+ /*
+ * 8. Check crystal jumper setting and program the Power and PLL Control
+ * accordingly Change RX wait
+ */
+ if (get_ref_clk() == 40) {
+ ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ;
+ cfg = CFG_PM_RXDLOZ_WAIT_12_UNIT;
+
+ } else {
+ /* 25 MHz */
+ ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ;
+ cfg = CFG_PM_RXDLOZ_WAIT_7_UNIT;
+ }
+
+ mask = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT |
+ PU_TX_INTP_BIT | PU_DFE_BIT | PLL_LOCK_BIT | PHY_MODE_MASK |
+ REF_FREF_SEL_MASK;
+ data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT |
+ PU_TX_INTP_BIT | PU_DFE_BIT | PHY_MODE_USB3 | ref_clk;
+ usb3_reg_set(reg_base, COMPHY_POWER_PLL_CTRL, data, mask);
+
+ mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK |
+ CFG_PM_RXDLOZ_WAIT_MASK;
+ data = CFG_PM_RXDEN_WAIT_1_UNIT | cfg;
+ usb3_reg_set(reg_base, COMPHY_PWR_MGM_TIM1, data, mask);
+
+ /*
+ * 9. Enable idle sync
+ */
+ data = IDLE_SYNC_EN_DEFAULT_VALUE | IDLE_SYNC_EN;
+ usb3_reg_set(reg_base, COMPHY_IDLE_SYNC_EN, data, REG_16_BIT_MASK);
+
+ /*
+ * 10. Enable the output of 500M clock
+ */
+ data = MISC_CTRL0_DEFAULT_VALUE | CLK500M_EN;
+ usb3_reg_set(reg_base, COMPHY_MISC_CTRL0, data, REG_16_BIT_MASK);
+
+ /*
+ * 11. Set 20-bit data width
+ */
+ usb3_reg_set(reg_base, COMPHY_DIG_LOOPBACK_EN, DATA_WIDTH_20BIT,
+ REG_16_BIT_MASK);
+
+ /*
+ * 12. Override Speed_PLL value and use MAC PLL
+ */
+ usb3_reg_set(reg_base, COMPHY_KVCO_CAL_CTRL,
+ (SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT),
+ REG_16_BIT_MASK);
+
+ /*
+ * 13. Check the Polarity invert bit
+ */
+ data = 0U;
+ if (invert & COMPHY_POLARITY_TXD_INVERT) {
+ data |= TXD_INVERT_BIT;
+ }
+ if (invert & COMPHY_POLARITY_RXD_INVERT) {
+ data |= RXD_INVERT_BIT;
+ }
+ mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
+ usb3_reg_set(reg_base, COMPHY_SYNC_PATTERN, data, mask);
+
+ /*
+ * 14. Set max speed generation to USB3.0 5Gbps
+ */
+ usb3_reg_set(reg_base, COMPHY_SYNC_MASK_GEN, PHY_GEN_MAX_USB3_5G,
+ PHY_GEN_MAX_MASK);
+
+ /*
+ * 15. Set capacitor value for FFE gain peaking to 0xF
+ */
+ usb3_reg_set(reg_base, COMPHY_GEN2_SET3,
+ GS3_FFE_CAP_SEL_VALUE, GS3_FFE_CAP_SEL_MASK);
+
+ /*
+ * 16. Release SW reset
+ */
+ data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32 | MODE_REFDIV_BY_4;
+ usb3_reg_set(reg_base, COMPHY_RST_CLK_CTRL, data, REG_16_BIT_MASK);
+
+ /* Wait for > 55 us to allow PCLK be enabled */
+ udelay(PLL_SET_DELAY_US);
+
+ if (comphy_index == COMPHY_LANE2) {
+ data = COMPHY_LANE_STAT1 + USB3PHY_LANE2_REG_BASE_OFFSET;
+ mmio_write_32(reg_base + COMPHY_LANE2_INDIR_ADDR_OFFSET,
+ data);
+
+ addr = reg_base + COMPHY_LANE2_INDIR_DATA_OFFSET;
+ ret = polling_with_timeout(addr, TXDCLK_PCLK_EN, TXDCLK_PCLK_EN,
+ COMPHY_PLL_TIMEOUT, REG_32BIT);
+ } else {
+ ret = polling_with_timeout(LANE_STAT1_ADDR(USB3) + reg_base,
+ TXDCLK_PCLK_EN, TXDCLK_PCLK_EN,
+ COMPHY_PLL_TIMEOUT, REG_16BIT);
+ }
+ if (ret) {
+ ERROR("Failed to lock USB3 PLL\n");
+ return -ETIMEDOUT;
+ }
+
+ debug_exit();
+
+ return 0;
+}
+
+static int mvebu_a3700_comphy_pcie_power_on(uint8_t comphy_index,
+ uint32_t comphy_mode)
+{
+ int ret;
+ uint32_t ref_clk;
+ uint32_t mask, data;
+ int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
+
+ debug_enter();
+
+ /* Configure phy selector for PCIe */
+ ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+ if (ret) {
+ return ret;
+ }
+
+ /* 1. Enable max PLL. */
+ reg_set16(LANE_CFG1_ADDR(PCIE) + COMPHY_SD_ADDR,
+ USE_MAX_PLL_RATE_EN, USE_MAX_PLL_RATE_EN);
+
+ /* 2. Select 20 bit SERDES interface. */
+ reg_set16(CLK_SRC_LO_ADDR(PCIE) + COMPHY_SD_ADDR,
+ CFG_SEL_20B, CFG_SEL_20B);
+
+ /* 3. Force to use reg setting for PCIe mode */
+ reg_set16(MISC_CTRL1_ADDR(PCIE) + COMPHY_SD_ADDR,
+ SEL_BITS_PCIE_FORCE, SEL_BITS_PCIE_FORCE);
+
+ /* 4. Change RX wait */
+ reg_set16(PWR_MGM_TIM1_ADDR(PCIE) + COMPHY_SD_ADDR,
+ CFG_PM_RXDEN_WAIT_1_UNIT | CFG_PM_RXDLOZ_WAIT_12_UNIT,
+ (CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK |
+ CFG_PM_RXDLOZ_WAIT_MASK));
+
+ /* 5. Enable idle sync */
+ reg_set16(IDLE_SYNC_EN_ADDR(PCIE) + COMPHY_SD_ADDR,
+ IDLE_SYNC_EN_DEFAULT_VALUE | IDLE_SYNC_EN, REG_16_BIT_MASK);
+
+ /* 6. Enable the output of 100M/125M/500M clock */
+ reg_set16(MISC_CTRL0_ADDR(PCIE) + COMPHY_SD_ADDR,
+ MISC_CTRL0_DEFAULT_VALUE | CLK500M_EN | TXDCLK_2X_SEL | CLK100M_125M_EN,
+ REG_16_BIT_MASK);
+
+ /*
+ * 7. Enable TX, PCIE global register, 0xd0074814, it is done in
+ * PCI-E driver
+ */
+
+ /*
+ * 8. Check crystal jumper setting and program the Power and PLL
+ * Control accordingly
+ */
+
+ if (get_ref_clk() == 40)
+ ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ;
+ else
+ ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ;
+
+ reg_set16(PWR_PLL_CTRL_ADDR(PCIE) + COMPHY_SD_ADDR,
+ (PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT |
+ PU_TX_INTP_BIT | PU_DFE_BIT | ref_clk | PHY_MODE_PCIE),
+ REG_16_BIT_MASK);
+
+ /* 9. Override Speed_PLL value and use MAC PLL */
+ reg_set16(KVCO_CAL_CTRL_ADDR(PCIE) + COMPHY_SD_ADDR,
+ SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT, REG_16_BIT_MASK);
+
+ /* 10. Check the Polarity invert bit */
+ data = 0U;
+ if (invert & COMPHY_POLARITY_TXD_INVERT) {
+ data |= TXD_INVERT_BIT;
+ }
+ if (invert & COMPHY_POLARITY_RXD_INVERT) {
+ data |= RXD_INVERT_BIT;
+ }
+ mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
+ reg_set16(SYNC_PATTERN_ADDR(PCIE) + COMPHY_SD_ADDR, data, mask);
+
+ /* 11. Release SW reset */
+ data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32;
+ mask = data | SOFT_RESET | MODE_REFDIV_MASK;
+ reg_set16(RST_CLK_CTRL_ADDR(PCIE) + COMPHY_SD_ADDR, data, mask);
+
+ /* Wait for > 55 us to allow PCLK be enabled */
+ udelay(PLL_SET_DELAY_US);
+
+ ret = polling_with_timeout(LANE_STAT1_ADDR(PCIE) + COMPHY_SD_ADDR,
+ TXDCLK_PCLK_EN, TXDCLK_PCLK_EN,
+ COMPHY_PLL_TIMEOUT, REG_16BIT);
+ if (ret) {
+ ERROR("Failed to lock PCIE PLL\n");
+ return -ETIMEDOUT;
+ }
+
+ debug_exit();
+
+ return 0;
+}
+
+int mvebu_3700_comphy_power_on(uint8_t comphy_index, uint32_t comphy_mode)
+{
+ int mode = COMPHY_GET_MODE(comphy_mode);
+ int ret = 0;
+
+ debug_enter();
+
+ switch (mode) {
+ case(COMPHY_SATA_MODE):
+ ret = mvebu_a3700_comphy_sata_power_on(comphy_index,
+ comphy_mode);
+ break;
+ case(COMPHY_SGMII_MODE):
+ case(COMPHY_2500BASEX_MODE):
+ ret = mvebu_a3700_comphy_sgmii_power_on(comphy_index,
+ comphy_mode);
+ break;
+ case (COMPHY_USB3_MODE):
+ case (COMPHY_USB3H_MODE):
+ ret = mvebu_a3700_comphy_usb3_power_on(comphy_index,
+ comphy_mode);
+ break;
+ case (COMPHY_PCIE_MODE):
+ ret = mvebu_a3700_comphy_pcie_power_on(comphy_index,
+ comphy_mode);
+ break;
+ default:
+ ERROR("comphy%d: unsupported comphy mode\n", comphy_index);
+ ret = -EINVAL;
+ break;
+ }
+
+ debug_exit();
+
+ return ret;
+}
+
+static int mvebu_a3700_comphy_usb3_power_off(void)
+{
+ /*
+ * Currently the USB3 MAC will control the USB3 PHY to set it to low
+ * state, thus do not need to power off USB3 PHY again.
+ */
+ debug_enter();
+ debug_exit();
+
+ return 0;
+}
+
+static int mvebu_a3700_comphy_sata_power_off(void)
+{
+ uintptr_t comphy_indir_regs = COMPHY_INDIRECT_REG;
+ uint32_t offset;
+
+ debug_enter();
+
+ /* Set phy isolation mode */
+ offset = COMPHY_ISOLATION_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
+ comphy_sata_set_indirect(comphy_indir_regs, offset, PHY_ISOLATE_MODE,
+ PHY_ISOLATE_MODE);
+
+ /* Power off PLL, Tx, Rx */
+ offset = COMPHY_POWER_PLL_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
+ comphy_sata_set_indirect(comphy_indir_regs, offset, 0,
+ PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT);
+
+ debug_exit();
+
+ return 0;
+}
+
+int mvebu_3700_comphy_power_off(uint8_t comphy_index, uint32_t comphy_mode)
+{
+ int mode = COMPHY_GET_MODE(comphy_mode);
+ int err = 0;
+
+ debug_enter();
+
+ if (!mode) {
+ /*
+ * The user did not specify which mode should be powered off.
+ * In this case we can identify this by reading the phy selector
+ * register.
+ */
+ mode = mvebu_a3700_comphy_get_mode(comphy_index);
+ }
+
+ switch (mode) {
+ case(COMPHY_SGMII_MODE):
+ case(COMPHY_2500BASEX_MODE):
+ err = mvebu_a3700_comphy_sgmii_power_off(comphy_index);
+ break;
+ case (COMPHY_USB3_MODE):
+ case (COMPHY_USB3H_MODE):
+ err = mvebu_a3700_comphy_usb3_power_off();
+ break;
+ case (COMPHY_SATA_MODE):
+ err = mvebu_a3700_comphy_sata_power_off();
+ break;
+
+ default:
+ debug("comphy%d: power off is not implemented for mode %d\n",
+ comphy_index, mode);
+ break;
+ }
+
+ debug_exit();
+
+ return err;
+}
+
+static int mvebu_a3700_comphy_sata_is_pll_locked(void)
+{
+ uint32_t data, addr;
+ uintptr_t comphy_indir_regs = COMPHY_INDIRECT_REG;
+ int ret = 0;
+
+ debug_enter();
+
+ /* Polling status */
+ mmio_write_32(comphy_indir_regs + COMPHY_LANE2_INDIR_ADDR_OFFSET,
+ COMPHY_DIG_LOOPBACK_EN + SATAPHY_LANE2_REG_BASE_OFFSET);
+ addr = comphy_indir_regs + COMPHY_LANE2_INDIR_DATA_OFFSET;
+ data = polling_with_timeout(addr, PLL_READY_TX_BIT, PLL_READY_TX_BIT,
+ COMPHY_PLL_TIMEOUT, REG_32BIT);
+
+ if (data != 0) {
+ ERROR("TX PLL is not locked\n");
+ ret = -ETIMEDOUT;
+ }
+
+ debug_exit();
+
+ return ret;
+}
+
+int mvebu_3700_comphy_is_pll_locked(uint8_t comphy_index, uint32_t comphy_mode)
+{
+ int mode = COMPHY_GET_MODE(comphy_mode);
+ int ret = 0;
+
+ debug_enter();
+
+ switch (mode) {
+ case(COMPHY_SATA_MODE):
+ ret = mvebu_a3700_comphy_sata_is_pll_locked();
+ break;
+
+ default:
+ ERROR("comphy[%d] mode[%d] doesn't support PLL lock check\n",
+ comphy_index, mode);
+ ret = -EINVAL;
+ break;
+ }
+
+ debug_exit();
+
+ return ret;
+}