diff options
Diffstat (limited to 'fdts/stm32mp135f-dk.dts')
| -rw-r--r-- | fdts/stm32mp135f-dk.dts | 331 |
1 files changed, 331 insertions, 0 deletions
diff --git a/fdts/stm32mp135f-dk.dts b/fdts/stm32mp135f-dk.dts new file mode 100644 index 0000000..0f06b67 --- /dev/null +++ b/fdts/stm32mp135f-dk.dts @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include <dt-bindings/clock/stm32mp13-clksrc.h> +#include "stm32mp135.dtsi" +#include "stm32mp13xf.dtsi" +#include "stm32mp13-ddr3-1x4Gb-1066-binF.dtsi" +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP135F-DK Discovery Board"; + compatible = "st,stm32mp135f-dk", "st,stm32mp135"; + + aliases { + serial0 = &uart4; + serial1 = &usart1; + serial2 = &uart8; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + v3v3_ao: v3v3_ao { + compatible = "regulator-fixed"; + regulator-name = "v3v3_ao"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&bsec { + board_id: board_id@f0 { + reg = <0xf0 0x4>; + st,non-secure-otp; + }; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; +}; + +&hash { + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; + status = "disabled"; + secure-status = "okay"; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + + status = "disabled"; + secure-status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + buck1-supply = <&vin>; + buck2-supply = <&vin>; + buck3-supply = <&vin>; + buck4-supply = <&vin>; + ldo1-supply = <&vin>; + ldo4-supply = <&vin>; + ldo5-supply = <&vin>; + ldo6-supply = <&vin>; + vref_ddr-supply = <&vin>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&v3v3_ao>; + + vddcpu: buck1 { + regulator-name = "vddcpu"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-over-current-protection; + }; + + vddcore: buck4 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_adc: ldo1 { + regulator-name = "vdd_adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + v1v8_periph: ldo6 { + regulator-name = "v1v8_periph"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { + regulator-name = "bst_out"; + }; + + v3v3_sw: pwr_sw2 { + regulator-name = "v3v3_sw"; + regulator-active-discharge = <1>; + regulator-always-on; + }; + }; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&pka { + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&rcc { + st,clksrc = < + CLK_MPU_PLL1P + CLK_AXI_PLL2P + CLK_MLAHBS_PLL3 + CLK_CKPER_HSE + CLK_RTC_LSE + CLK_SDMMC1_PLL4P + CLK_SDMMC2_PLL4P + CLK_STGEN_HSE + CLK_USBPHY_HSE + CLK_I2C4_HSI + CLK_USBO_USBPHY + CLK_I2C12_HSI + CLK_UART2_HSI + CLK_UART4_HSI + CLK_SAES_AXI + >; + + st,clkdiv = < + DIV(DIV_AXI, 0) + DIV(DIV_MLAHB, 0) + DIV(DIV_APB1, 1) + DIV(DIV_APB2, 1) + DIV(DIV_APB3, 1) + DIV(DIV_APB4, 1) + DIV(DIV_APB5, 2) + DIV(DIV_APB6, 1) + DIV(DIV_RTC, 0) + >; + + st,pll_vco { + pll1_vco_1300Mhz: pll1-vco-1300Mhz { + src = < CLK_PLL12_HSE >; + divmn = < 2 80 >; + frac = < 0x800 >; + }; + + pll2_vco_1066Mhz: pll2-vco-1066Mhz { + src = < CLK_PLL12_HSE >; + divmn = < 2 65 >; + frac = < 0x1400 >; + }; + + pll3_vco_417_8Mhz: pll3-vco-417_8Mhz { + src = < CLK_PLL3_HSE >; + divmn = < 1 33 >; + frac = < 0x1a04 >; + }; + + pll4_vco_600Mhz: pll4-vco-600Mhz { + src = < CLK_PLL4_HSE >; + divmn = < 1 49 >; + }; + }; + + /* VCO = 1300.0 MHz => P = 650 (CPU) */ + pll1:st,pll@0 { + compatible = "st,stm32mp1-pll"; + reg = <0>; + + st,pll = < &pll1_cfg1 >; + + pll1_cfg1: pll1_cfg1 { + st,pll_vco = < &pll1_vco_1300Mhz >; + st,pll_div_pqr = < 0 1 1 >; + }; + }; + + /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 266, R = 533 (DDR) */ + pll2:st,pll@1 { + compatible = "st,stm32mp1-pll"; + reg = <1>; + + st,pll = < &pll2_cfg1 >; + + pll2_cfg1: pll2_cfg1 { + st,pll_vco = < &pll2_vco_1066Mhz >; + st,pll_div_pqr = < 1 1 0 >; + }; + }; + + /* VCO = 417.8 MHz => P = 209, Q = 24, R = 209 */ + pll3:st,pll@2 { + compatible = "st,stm32mp1-pll"; + reg = <2>; + + st,pll = < &pll3_cfg1 >; + + pll3_cfg1: pll3_cfg1 { + st,pll_vco = < &pll3_vco_417_8Mhz >; + st,pll_div_pqr = < 1 16 1 >; + }; + }; + + /* VCO = 600.0 MHz => P = 50, Q = 10, R = 100 */ + pll4:st,pll@3 { + compatible = "st,stm32mp1-pll"; + reg = <3>; + + st,pll = < &pll4_cfg1 >; + + pll4_cfg1: pll4_cfg1 { + st,pll_vco = < &pll4_vco_600Mhz >; + st,pll_div_pqr = < 11 59 5 >; + }; + }; +}; + +&rng { + status = "okay"; +}; + +&saes { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + status = "disabled"; +}; + +&usart1 { + pinctrl-names = "default"; + pinctrl-0 = <&usart1_pins_a>; + uart-has-rtscts; + status = "disabled"; +}; |