diff options
Diffstat (limited to 'include/drivers/arm/pl011.h')
| -rw-r--r-- | include/drivers/arm/pl011.h | 99 |
1 files changed, 99 insertions, 0 deletions
diff --git a/include/drivers/arm/pl011.h b/include/drivers/arm/pl011.h new file mode 100644 index 0000000..ebc6643 --- /dev/null +++ b/include/drivers/arm/pl011.h @@ -0,0 +1,99 @@ +/* + * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef PL011_H +#define PL011_H + +#include <drivers/console.h> + +/* PL011 Registers */ +#define UARTDR 0x000 +#define UARTRSR 0x004 +#define UARTECR 0x004 +#define UARTFR 0x018 +#define UARTIMSC 0x038 +#define UARTRIS 0x03C +#define UARTICR 0x044 + +/* PL011 registers (out of the SBSA specification) */ +#if !PL011_GENERIC_UART +#define UARTILPR 0x020 +#define UARTIBRD 0x024 +#define UARTFBRD 0x028 +#define UARTLCR_H 0x02C +#define UARTCR 0x030 +#define UARTIFLS 0x034 +#define UARTMIS 0x040 +#define UARTDMACR 0x048 +#endif /* !PL011_GENERIC_UART */ + +/* Data status bits */ +#define UART_DATA_ERROR_MASK 0x0F00 + +/* Status reg bits */ +#define UART_STATUS_ERROR_MASK 0x0F + +/* Flag reg bits */ +#define PL011_UARTFR_RI (1 << 8) /* Ring indicator */ +#define PL011_UARTFR_TXFE (1 << 7) /* Transmit FIFO empty */ +#define PL011_UARTFR_RXFF (1 << 6) /* Receive FIFO full */ +#define PL011_UARTFR_TXFF (1 << 5) /* Transmit FIFO full */ +#define PL011_UARTFR_RXFE (1 << 4) /* Receive FIFO empty */ +#define PL011_UARTFR_BUSY (1 << 3) /* UART busy */ +#define PL011_UARTFR_DCD (1 << 2) /* Data carrier detect */ +#define PL011_UARTFR_DSR (1 << 1) /* Data set ready */ +#define PL011_UARTFR_CTS (1 << 0) /* Clear to send */ + +#define PL011_UARTFR_TXFF_BIT 5 /* Transmit FIFO full bit in UARTFR register */ +#define PL011_UARTFR_RXFE_BIT 4 /* Receive FIFO empty bit in UARTFR register */ +#define PL011_UARTFR_BUSY_BIT 3 /* UART busy bit in UARTFR register */ + +/* Control reg bits */ +#if !PL011_GENERIC_UART +#define PL011_UARTCR_CTSEN (1 << 15) /* CTS hardware flow control enable */ +#define PL011_UARTCR_RTSEN (1 << 14) /* RTS hardware flow control enable */ +#define PL011_UARTCR_RTS (1 << 11) /* Request to send */ +#define PL011_UARTCR_DTR (1 << 10) /* Data transmit ready. */ +#define PL011_UARTCR_RXE (1 << 9) /* Receive enable */ +#define PL011_UARTCR_TXE (1 << 8) /* Transmit enable */ +#define PL011_UARTCR_LBE (1 << 7) /* Loopback enable */ +#define PL011_UARTCR_UARTEN (1 << 0) /* UART Enable */ + +#if !defined(PL011_LINE_CONTROL) +/* FIFO Enabled / No Parity / 8 Data bit / One Stop Bit */ +#define PL011_LINE_CONTROL (PL011_UARTLCR_H_FEN | PL011_UARTLCR_H_WLEN_8) +#endif + +/* Line Control Register Bits */ +#define PL011_UARTLCR_H_SPS (1 << 7) /* Stick parity select */ +#define PL011_UARTLCR_H_WLEN_8 (3 << 5) +#define PL011_UARTLCR_H_WLEN_7 (2 << 5) +#define PL011_UARTLCR_H_WLEN_6 (1 << 5) +#define PL011_UARTLCR_H_WLEN_5 (0 << 5) +#define PL011_UARTLCR_H_FEN (1 << 4) /* FIFOs Enable */ +#define PL011_UARTLCR_H_STP2 (1 << 3) /* Two stop bits select */ +#define PL011_UARTLCR_H_EPS (1 << 2) /* Even parity select */ +#define PL011_UARTLCR_H_PEN (1 << 1) /* Parity Enable */ +#define PL011_UARTLCR_H_BRK (1 << 0) /* Send break */ + +#endif /* !PL011_GENERIC_UART */ + +#ifndef __ASSEMBLER__ + +#include <stdint.h> + +/* + * Initialize a new PL011 console instance and register it with the console + * framework. The |console| pointer must point to storage that will be valid + * for the lifetime of the console, such as a global or static local variable. + * Its contents will be reinitialized from scratch. + */ +int console_pl011_register(uintptr_t baseaddr, uint32_t clock, uint32_t baud, + console_t *console); + +#endif /*__ASSEMBLER__*/ + +#endif /* PL011_H */ |