diff options
Diffstat (limited to '')
| -rw-r--r-- | include/drivers/brcm/emmc/emmc_chal_sd.h | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/include/drivers/brcm/emmc/emmc_chal_sd.h b/include/drivers/brcm/emmc/emmc_chal_sd.h new file mode 100644 index 0000000..8d223f9 --- /dev/null +++ b/include/drivers/brcm/emmc/emmc_chal_sd.h @@ -0,0 +1,202 @@ +/* + * Copyright (c) 2016 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef CHAL_SD_H +#define CHAL_SD_H + +#include <stddef.h> + +#define BASE_CLK_FREQ (200 * 1000 * 1000) +#define INIT_CLK_FREQ (400 * 1000) + +#define SD_ERROR_RECOVERABLE 0 +#define SD_ERROR_NON_RECOVERABLE 1 + +#define SD_OK 0 +#define SD_FAIL (-1) +#define SD_INVALID_HANDLE (-2) +#define SD_CEATA_INIT_ERROR (-3) +#define SD_RESET_ERROR (-4) +#define SD_CARD_INIT_ERROR (-5) +#define SD_INV_DATA_WIDTH (-6) +#define SD_SET_BUS_WIDTH_ERROR (-7) +#define SD_DMA_NOT_SUPPORT (-8) +#define SD_SDIO_READ_ERROR (-9) +#define SD_SDIO_WRITE_ERROR (-10) +#define SD_WRITE_ERROR (-11) +#define SD_READ_ERROR (-12) +#define SD_READ_SIZE_ERROR (-13) +#define SD_RW_ADDRESS_ERROR (-14) +#define SD_XFER_ADDRESS_ERROR (-15) +#define SD_DATA_XFER_ADDR_ERROR (-16) +#define SD_DATA_XFER_ERROR (-17) +#define SD_WRITE_SIZE_ERROR (-18) +#define SD_CMD_STATUS_UPDATE_ERR (-19) +#define SD_CMD12_ERROR (-20) +#define SD_CMD_DATA_ERROR (-21) +#define SD_CMD_TIMEOUT (-22) +#define SD_CMD_NO_RESPONSE (-22) +#define SD_CMD_ABORT_ERROR (-23) +#define SD_CMD_INVALID (-24) +#define SD_CMD_RESUME_ERROR (-25) +#define SD_CMD_ERR_INVALID_RESPONSE (-26) +#define SD_WAIT_TIMEOUT (-27) +#define SD_READ_TIMEOUT (-28) +#define SD_CEATA_REST_ERROR (-29) +#define SD_INIT_CAED_FAILED (-30) +#define SD_ERROR_CLOCK_OFFLIMIT (-31) +#define SD_INV_SLOT (-32) + +#define SD_NOR_INTERRUPTS 0x000000FF +#define SD_ERR_INTERRUPTS 0x03FF0000 +#define SD_CMD_ERROR_INT 0x010F0000 +#define SD_DAT_ERROR_INT 0x02F00000 +#define SD_DAT_TIMEOUT 0x00100000 + +/* Operation modes */ +#define SD_PIO_MODE 0 +#define SD_INT_MODE 1 + +/* Support both ADMA and SDMA (for version 2.0 and above) */ +#define SD_DMA_OFF 0 +#define SD_DMA_SDMA 1 +#define SD_DMA_ADMA 2 + +#define SD_NORMAL_SPEED 0 +#define SD_HIGH_SPEED 1 + +#define SD_XFER_CARD_TO_HOST 3 +#define SD_XFER_HOST_TO_CARD 4 + +#define SD_CARD_DETECT_AUTO 0 +#define SD_CARD_DETECT_SD 1 +#define SD_CARD_DETECT_SDIO 2 +#define SD_CARD_DETECT_MMC 3 +#define SD_CARD_DETECT_CEATA 4 + +#define SD_ABORT_SYNC_MODE 0 +#define SD_ABORT_ASYNC_MODE 1 + +#define SD_CMD_ERROR_FLAGS (0x18F << 16) +#define SD_DATA_ERROR_FLAGS (0x70 << 16) +#define SD_AUTO_CMD12_ERROR_FLAGS (0x9F) + +#define SD_CARD_STATUS_ERROR 0x10000000 +#define SD_CMD_MISSING 0x80000000 +#define SD_ERROR_INT 0x8000 + +#define SD_TRAN_HIGH_SPEED 0x32 +#define SD_CARD_HIGH_CAPACITY 0x40000000 +#define SD_CARD_POWER_UP_STATUS 0x80000000 + +#define SD_HOST_CORE_TIMEOUT 0x0E + +/* SD CARD and Host Controllers bus width */ +#define SD_BUS_DATA_WIDTH_1BIT 0x00 +#define SD_BUS_DATA_WIDTH_4BIT 0x02 +#define SD_BUS_DATA_WIDTH_8BIT 0x20 + +/* dma boundary settings */ +#define SD_DMA_BOUNDARY_4K 0 +#define SD_DMA_BOUNDARY_8K (1 << 12) +#define SD_DMA_BOUNDARY_16K (2 << 12) +#define SD_DMA_BOUNDARY_32K (3 << 12) +#define SD_DMA_BOUNDARY_64K (4 << 12) +#define SD_DMA_BOUNDARY_128K (5 << 12) +#define SD_DMA_BOUNDARY_256K (6 << 12) +#define SD_DMA_BOUNDARY_512K (7 << 12) + +#define SD_CMDR_CMD_NORMAL 0x00000000 +#define SD_CMDR_CMD_SUSPEND 0x00400000 +#define SD_CMDR_CMD_RESUME 0x00800000 +#define SD_CMDR_CMD_ABORT 0x00c00000 + +#define SD_CMDR_RSP_TYPE_NONE 0x0 +#define SD_CMDR_RSP_TYPE_R2 0x1 +#define SD_CMDR_RSP_TYPE_R3_4 0x2 +#define SD_CMDR_RSP_TYPE_R1_5_6 0x2 +#define SD_CMDR_RSP_TYPE_R1b_5b 0x3 +#define SD_CMDR_RSP_TYPE_S 16 + +struct sd_ctrl_info { + uint32_t blkReg; /* current block register cache value */ + uint32_t cmdReg; /* current command register cache value */ + uint32_t argReg; /* current argument register cache value */ + uint32_t cmdIndex; /* current command index */ + uint32_t cmdStatus; /* current command status, cmd/data compelete */ + uint16_t rca; /* relative card address */ + uint32_t ocr; /* operation codition */ + uint32_t eventList; /* events list */ + uint32_t blkGapEnable; + + uint32_t capability; /* controller's capbilities */ + uint32_t maxCurrent; /* maximum current supported */ + uint32_t present; /* if card is inserted or removed */ + uint32_t version; /* SD spec version 1.0 or 2.0 */ + uint32_t vendor; /* vendor number */ + + uintptr_t sdRegBaseAddr; /* sdio control registers */ + uintptr_t hostRegBaseAddr; /* SD Host control registers */ +}; + +struct sd_cfg { + uint32_t mode; /* interrupt or polling */ + uint32_t dma; /* dma enabled or disabled */ + uint32_t retryLimit; /* command retry limit */ + uint32_t speedMode; /* speed mode, 0 standard, 1 high speed */ + uint32_t voltage; /* voltage level */ + uint32_t blockSize; /* access block size (512 for HC card) */ + uint32_t dmaBoundary; /* dma address boundary */ + uint32_t detSignal; /* card det signal src, for test purpose only */ + uint32_t rdWaiting; + uint32_t wakeupOut; + uint32_t wakeupIn; + uint32_t wakeupInt; + uint32_t wfe_retry; + uint32_t gapInt; + uint32_t readWait; + uint32_t led; +}; + +struct sd_dev { + struct sd_cfg cfg; /* SD configuration */ + struct sd_ctrl_info ctrl; /* SD info */ +}; + +int32_t chal_sd_start(CHAL_HANDLE *sdHandle, uint32_t mode, + uint32_t sdBase, uint32_t hostBase); +int32_t chal_sd_config(CHAL_HANDLE *sdHandle, uint32_t speed, + uint32_t retry, uint32_t boundary, + uint32_t blkSize, uint32_t dma); +int32_t chal_sd_stop(void); +int32_t chal_sd_set_dma(CHAL_HANDLE *sdHandle, uint32_t mode); +uintptr_t chal_sd_get_dma_addr(CHAL_HANDLE *handle); +int32_t chal_sd_config_bus_width(CHAL_HANDLE *sdHandle, int32_t width); +int32_t chal_sd_send_cmd(CHAL_HANDLE *sdHandle, uint32_t cmdIndex, + uint32_t arg, uint32_t options); +int32_t chal_sd_set_dma_addr(CHAL_HANDLE *sdHandle, uintptr_t address); +int32_t chal_sd_set_clock(CHAL_HANDLE *sdHandle, + uint32_t div_ctrl_setting, uint32_t on); +uint32_t chal_sd_freq_2_div_ctrl_setting(uint32_t desired_freq); +int32_t chal_sd_setup_xfer(CHAL_HANDLE *sdHandle, uint8_t *data, + uint32_t length, int32_t dir); +int32_t chal_sd_write_buffer(CHAL_HANDLE *sdHandle, uint32_t length, + uint8_t *data); +int32_t chal_sd_read_buffer(CHAL_HANDLE *sdHandle, uint32_t length, + uint8_t *data); +int32_t chal_sd_reset_line(CHAL_HANDLE *sdHandle, uint32_t line); +int32_t chal_sd_get_response(CHAL_HANDLE *sdHandle, uint32_t *resp); +int32_t chal_sd_clear_pending_irq(CHAL_HANDLE *sdHandle); +int32_t chal_sd_get_irq_status(CHAL_HANDLE *sdHandle); +int32_t chal_sd_clear_irq(CHAL_HANDLE *sdHandle, uint32_t mask); +uint32_t chal_sd_get_present_status(CHAL_HANDLE *sdHandle); +int32_t chal_sd_get_atuo12_error(CHAL_HANDLE *sdHandle); +void chal_sd_set_speed(CHAL_HANDLE *sdHandle, uint32_t speed); +int32_t chal_sd_check_cap(CHAL_HANDLE *sdHandle, uint32_t cap); +void chal_sd_set_irq_signal(CHAL_HANDLE *sdHandle, uint32_t mask, + uint32_t state); +void chal_sd_dump_fifo(CHAL_HANDLE *sdHandle); +#endif /* CHAL_SD_H */ |