diff options
Diffstat (limited to '')
| -rw-r--r-- | include/export/lib/bl_aux_params/bl_aux_params_exp.h | 89 | ||||
| -rw-r--r-- | include/export/lib/utils_def_exp.h | 37 |
2 files changed, 126 insertions, 0 deletions
diff --git a/include/export/lib/bl_aux_params/bl_aux_params_exp.h b/include/export/lib/bl_aux_params/bl_aux_params_exp.h new file mode 100644 index 0000000..7391dec --- /dev/null +++ b/include/export/lib/bl_aux_params/bl_aux_params_exp.h @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_LIB_BL_AUX_PARAMS_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_LIB_BL_AUX_PARAMS_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +#include "../../drivers/gpio_exp.h" + +/* + * This API implements a lightweight parameter passing mechanism that can be + * used to pass SoC Firmware configuration data from BL2 to BL31 by platforms or + * configurations that do not want to depend on libfdt. It is structured as a + * singly-linked list of parameter structures that all share the same common + * header but may have different (and differently-sized) structure bodies after + * that. The header contains a type field to indicate the parameter type (which + * is used to infer the structure length and how to interpret its contents) and + * a next pointer which contains the absolute physical address of the next + * parameter structure. The next pointer in the last structure block is set to + * NULL. The picture below shows how the parameters are kept in memory. + * + * head of list ---> +----------------+ --+ + * | type | | + * +----------------+ |--> struct bl_aux_param + * +----| next | | + * | +----------------+ --+ + * | | parameter data | + * | +----------------+ + * | + * +--> +----------------+ --+ + * | type | | + * +----------------+ |--> struct bl_aux_param + * NULL <---| next | | + * +----------------+ --+ + * | parameter data | + * +----------------+ + * + * Note: The SCTLR_EL3.A bit (Alignment fault check enable) is set in TF-A, so + * BL2 must ensure that each parameter struct starts on a 64-bit aligned address + * to avoid alignment faults. Parameters may be allocated in any address range + * accessible at the time of BL31 handoff (e.g. SRAM, DRAM, SoC-internal scratch + * registers, etc.), in particular address ranges that may not be mapped in + * BL31's page tables, so the parameter list must be parsed before the MMU is + * enabled and any information that is required at a later point should be + * deep-copied out into BL31-internal data structures. + */ + +enum bl_aux_param_type { + BL_AUX_PARAM_NONE = 0, + BL_AUX_PARAM_VENDOR_SPECIFIC_FIRST = 0x1, + /* 0x1 - 0x7fffffff can be used by vendor-specific handlers. */ + BL_AUX_PARAM_VENDOR_SPECIFIC_LAST = 0x7fffffff, + BL_AUX_PARAM_GENERIC_FIRST = 0x80000001, + BL_AUX_PARAM_COREBOOT_TABLE = BL_AUX_PARAM_GENERIC_FIRST, + /* 0x80000001 - 0xffffffff are reserved for the generic handler. */ + BL_AUX_PARAM_GENERIC_LAST = 0xffffffff, + /* Top 32 bits of the type field are reserved for future use. */ +}; + +/* common header for all BL aux parameters */ +struct bl_aux_param_header { + uint64_t type; + uint64_t next; +}; + +/* commonly useful parameter structures that can be shared by multiple types */ +struct bl_aux_param_uint64 { + struct bl_aux_param_header h; + uint64_t value; +}; + +struct bl_aux_gpio_info { + uint8_t polarity; + uint8_t direction; + uint8_t pull_mode; + uint8_t reserved; + uint32_t index; +}; + +struct bl_aux_param_gpio { + struct bl_aux_param_header h; + struct bl_aux_gpio_info gpio; +}; + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_LIB_BL_AUX_PARAMS_EXP_H */ diff --git a/include/export/lib/utils_def_exp.h b/include/export/lib/utils_def_exp.h new file mode 100644 index 0000000..d4a4a85 --- /dev/null +++ b/include/export/lib/utils_def_exp.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_LIB_UTILS_DEF_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_LIB_UTILS_DEF_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +/* + * For those constants to be shared between C and other sources, apply a 'U', + * 'UL', 'ULL', 'L' or 'LL' suffix to the argument only in C, to avoid + * undefined or unintended behaviour. + * + * The GNU assembler and linker do not support these suffixes (it causes the + * build process to fail) therefore the suffix is omitted when used in linker + * scripts and assembler files. +*/ +#if defined(__ASSEMBLER__) +# define U(_x) (_x) +# define UL(_x) (_x) +# define ULL(_x) (_x) +# define L(_x) (_x) +# define LL(_x) (_x) +#else +# define U_(_x) (_x##U) +# define U(_x) U_(_x) +# define UL(_x) (_x##UL) +# define ULL(_x) (_x##ULL) +# define L(_x) (_x##L) +# define LL(_x) (_x##LL) + +#endif + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_LIB_UTILS_DEF_EXP_H */ |