diff options
Diffstat (limited to 'include/export')
| -rw-r--r-- | include/export/README | 33 | ||||
| -rw-r--r-- | include/export/common/bl_common_exp.h | 95 | ||||
| -rw-r--r-- | include/export/common/ep_info_exp.h | 119 | ||||
| -rw-r--r-- | include/export/common/param_header_exp.h | 42 | ||||
| -rw-r--r-- | include/export/common/tbbr/tbbr_img_def_exp.h | 119 | ||||
| -rw-r--r-- | include/export/drivers/gpio_exp.h | 23 | ||||
| -rw-r--r-- | include/export/lib/bl_aux_params/bl_aux_params_exp.h | 89 | ||||
| -rw-r--r-- | include/export/lib/utils_def_exp.h | 37 | ||||
| -rw-r--r-- | include/export/plat/mediatek/common/plat_params_exp.h | 19 | ||||
| -rw-r--r-- | include/export/plat/rockchip/common/plat_params_exp.h | 35 |
10 files changed, 611 insertions, 0 deletions
diff --git a/include/export/README b/include/export/README new file mode 100644 index 0000000..2de8d6b --- /dev/null +++ b/include/export/README @@ -0,0 +1,33 @@ +All headers under include/export/ are export headers that are intended for +inclusion in third-party code which needs to interact with TF-A data structures +or interfaces. They must follow these special rules: + +- Header guards should start with ARM_TRUSTED_FIRMWARE_ to reduce clash risk. + +- All definitions should be sufficiently namespaced (e.g. with BL_ or TF_) to + make name clashes with third-party code unlikely. + +- They must not #include any headers except other export headers, and those + includes must use relative paths with "../double_quotes.h" notation. + +- They must not rely on any type definitions other that <stdint.h> types defined + in the ISO C standard (i.e. uint64_t is fine, but not u_register_t). They + should still not #include <stdint.h>. Instead, wrapper headers including + export headers need to ensure that they #include <stdint.h> earlier in their + include order. + +- They must not rely on any macro definitions other than those which are + pre-defined by all common compilers (e.g. __ASSEMBLER__ or __aarch64__). + +- They must only contain macro, type and structure definitions, no prototypes. + +- They should avoid using integer types with architecture-dependent widths + (e.g. long, uintptr_t, pointer types) where possible. (Some existing export + headers are violating this for now.) + +- Their names should always end in "_exp.h". + +- Normal TF-A code should never include export headers directly. Instead, it + should include a wrapper header that ensures the export header is included in + the right manner. (The wrapper header for include/export/x/y/z_exp.h should + normally be placed at include/x/y/z.h.) diff --git a/include/export/common/bl_common_exp.h b/include/export/common/bl_common_exp.h new file mode 100644 index 0000000..2cc7c54 --- /dev/null +++ b/include/export/common/bl_common_exp.h @@ -0,0 +1,95 @@ +/* + * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_BL_COMMON_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_BL_COMMON_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +#include "ep_info_exp.h" +#include "tbbr/tbbr_img_def_exp.h" + +/* + * The following are used for image state attributes. + * Image can only be in one of the following state. + */ +#define IMAGE_STATE_RESET U(0) +#define IMAGE_STATE_COPIED U(1) +#define IMAGE_STATE_COPYING U(2) +#define IMAGE_STATE_AUTHENTICATED U(3) +#define IMAGE_STATE_EXECUTED U(4) +#define IMAGE_STATE_INTERRUPTED U(5) + +#define IMAGE_ATTRIB_SKIP_LOADING U(0x02) +#define IMAGE_ATTRIB_PLAT_SETUP U(0x04) + +#define INVALID_IMAGE_ID U(0xFFFFFFFF) + +#ifndef __ASSEMBLER__ + +/***************************************************************************** + * Image info binary provides information from the image loader that + * can be used by the firmware to manage available trusted RAM. + * More advanced firmware image formats can provide additional + * information that enables optimization or greater flexibility in the + * common firmware code + *****************************************************************************/ +typedef struct image_info { + param_header_t h; + uintptr_t image_base; /* physical address of base of image */ + uint32_t image_size; /* bytes read from image file */ + uint32_t image_max_size; +} image_info_t; + +/* BL image node in the BL image execution sequence */ +typedef struct bl_params_node { + unsigned int image_id; + image_info_t *image_info; + entry_point_info_t *ep_info; + struct bl_params_node *next_params_info; +} bl_params_node_t; + +/* + * BL image head node in the BL image execution sequence + * It is also used to pass information to next BL image. + */ +typedef struct bl_params { + param_header_t h; + bl_params_node_t *head; +} bl_params_t; + +/***************************************************************************** + * The image descriptor struct definition. + *****************************************************************************/ +typedef struct image_desc { + /* Contains unique image id for the image. */ + unsigned int image_id; + /* + * This member contains Image state information. + * Refer IMAGE_STATE_XXX defined above. + */ + unsigned int state; + uint32_t copied_size; /* image size copied in blocks */ + image_info_t image_info; + entry_point_info_t ep_info; +} image_desc_t; + +/* BL image node in the BL image loading sequence */ +typedef struct bl_load_info_node { + unsigned int image_id; + image_info_t *image_info; + struct bl_load_info_node *next_load_info; +} bl_load_info_node_t; + +/* BL image head node in the BL image loading sequence */ +typedef struct bl_load_info { + param_header_t h; + bl_load_info_node_t *head; +} bl_load_info_t; + +#endif /* __ASSEMBLER__ */ + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_BL_COMMON_EXP_H */ diff --git a/include/export/common/ep_info_exp.h b/include/export/common/ep_info_exp.h new file mode 100644 index 0000000..a5bd10a --- /dev/null +++ b/include/export/common/ep_info_exp.h @@ -0,0 +1,119 @@ +/* + * Copyright (c) 2021, Arm Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_EP_INFO_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_EP_INFO_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +#include "../lib/utils_def_exp.h" +#include "param_header_exp.h" + +/******************************************************************************* + * Constants that allow assembler code to access members of and the + * 'entry_point_info' structure at their correct offsets. + ******************************************************************************/ +#define ENTRY_POINT_INFO_PC_OFFSET U(0x08) +#ifdef __aarch64__ +#define ENTRY_POINT_INFO_ARGS_OFFSET U(0x18) +#else +#define ENTRY_POINT_INFO_LR_SVC_OFFSET U(0x10) +#define ENTRY_POINT_INFO_ARGS_OFFSET U(0x14) +#endif + +/* + * Security state of the image. Bit 0 and + * bit 5 are used to determine the security + * state of the image as follows: + * + * --------------------------------- + * Bit 5 | Bit 0 | Security state + * --------------------------------- + * 0 0 EP_SECURE + * 0 1 EP_NON_SECURE + * 1 1 EP_REALM + */ +#define EP_SECURITY_MASK UL(0x21) +#define EP_SECURITY_SHIFT UL(0) +#define EP_SECURE UL(0x0) +#define EP_NON_SECURE UL(0x1) +#define EP_REALM UL(0x21) + +/* Endianness of the image. */ +#define EP_EE_MASK U(0x2) +#define EP_EE_SHIFT U(1) +#define EP_EE_LITTLE U(0x0) +#define EP_EE_BIG U(0x2) +#define EP_GET_EE(x) ((x) & EP_EE_MASK) +#define EP_SET_EE(x, ee) ((x) = ((x) & ~EP_EE_MASK) | (ee)) + +/* Enable or disable access to the secure timer from secure images. */ +#define EP_ST_MASK U(0x4) +#define EP_ST_SHIFT U(2) +#define EP_ST_DISABLE U(0x0) +#define EP_ST_ENABLE U(0x4) +#define EP_GET_ST(x) ((x) & EP_ST_MASK) +#define EP_SET_ST(x, ee) ((x) = ((x) & ~EP_ST_MASK) | (ee)) + +/* Determine if an image is executable or not. */ +#define EP_EXE_MASK U(0x8) +#define EP_EXE_SHIFT U(3) +#define EP_NON_EXECUTABLE U(0x0) +#define EP_EXECUTABLE U(0x8) +#define EP_GET_EXE(x) ((x) & EP_EXE_MASK) +#define EP_SET_EXE(x, ee) ((x) = ((x) & ~EP_EXE_MASK) | (ee)) + +/* Flag to indicate the first image that is executed. */ +#define EP_FIRST_EXE_MASK U(0x10) +#define EP_FIRST_EXE_SHIFT U(4) +#define EP_FIRST_EXE U(0x10) +#define EP_GET_FIRST_EXE(x) ((x) & EP_FIRST_EXE_MASK) +#define EP_SET_FIRST_EXE(x, ee) ((x) = ((x) & ~EP_FIRST_EXE_MASK) | (ee)) + +#ifndef __ASSEMBLER__ + +typedef struct aapcs64_params { + uint64_t arg0; + uint64_t arg1; + uint64_t arg2; + uint64_t arg3; + uint64_t arg4; + uint64_t arg5; + uint64_t arg6; + uint64_t arg7; +} aapcs64_params_t; + +typedef struct aapcs32_params { + uint32_t arg0; + uint32_t arg1; + uint32_t arg2; + uint32_t arg3; +} aapcs32_params_t; + +/***************************************************************************** + * This structure represents the superset of information needed while + * switching exception levels. The only two mechanisms to do so are + * ERET & SMC. Security state is indicated using bit zero of header + * attribute + * NOTE: BL1 expects entrypoint followed by spsr at an offset from the start + * of this structure defined by the macro `ENTRY_POINT_INFO_PC_OFFSET` while + * processing SMC to jump to BL31. + *****************************************************************************/ +typedef struct entry_point_info { + param_header_t h; + uintptr_t pc; + uint32_t spsr; +#ifdef __aarch64__ + aapcs64_params_t args; +#else + uintptr_t lr_svc; + aapcs32_params_t args; +#endif +} entry_point_info_t; + +#endif /*__ASSEMBLER__*/ + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_EP_INFO_EXP_H */ diff --git a/include/export/common/param_header_exp.h b/include/export/common/param_header_exp.h new file mode 100644 index 0000000..15bb6f2 --- /dev/null +++ b/include/export/common/param_header_exp.h @@ -0,0 +1,42 @@ +/* + * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_PARAM_HEADER_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_PARAM_HEADER_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +#include "../lib/utils_def_exp.h" + +/* Param header types */ +#define PARAM_EP U(0x01) +#define PARAM_IMAGE_BINARY U(0x02) +#define PARAM_BL31 U(0x03) +#define PARAM_BL_LOAD_INFO U(0x04) +#define PARAM_BL_PARAMS U(0x05) +#define PARAM_PSCI_LIB_ARGS U(0x06) +#define PARAM_SP_IMAGE_BOOT_INFO U(0x07) + +/* Param header version */ +#define PARAM_VERSION_1 U(0x01) +#define PARAM_VERSION_2 U(0x02) + +#ifndef __ASSEMBLER__ + +/*************************************************************************** + * This structure provides version information and the size of the + * structure, attributes for the structure it represents + ***************************************************************************/ +typedef struct param_header { + uint8_t type; /* type of the structure */ + uint8_t version; /* version of this structure */ + uint16_t size; /* size of this structure in bytes */ + uint32_t attr; /* attributes: unused bits SBZ */ +} param_header_t; + +#endif /*__ASSEMBLER__*/ + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_PARAM_HEADER_EXP_H */ diff --git a/include/export/common/tbbr/tbbr_img_def_exp.h b/include/export/common/tbbr/tbbr_img_def_exp.h new file mode 100644 index 0000000..98a0099 --- /dev/null +++ b/include/export/common/tbbr/tbbr_img_def_exp.h @@ -0,0 +1,119 @@ +/* + * Copyright (c) 2019-2022, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_TBBR_TBBR_IMG_DEF_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_TBBR_TBBR_IMG_DEF_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +#include "../../lib/utils_def_exp.h" + +/* Firmware Image Package */ +#define FIP_IMAGE_ID U(0) + +/* Trusted Boot Firmware BL2 */ +#define BL2_IMAGE_ID U(1) + +/* SCP Firmware SCP_BL2 */ +#define SCP_BL2_IMAGE_ID U(2) + +/* EL3 Runtime Firmware BL31 */ +#define BL31_IMAGE_ID U(3) + +/* Secure Payload BL32 (Trusted OS) */ +#define BL32_IMAGE_ID U(4) + +/* Non-Trusted Firmware BL33 */ +#define BL33_IMAGE_ID U(5) + +/* Certificates */ +#define TRUSTED_BOOT_FW_CERT_ID U(6) +#define TRUSTED_KEY_CERT_ID U(7) + +#define SCP_FW_KEY_CERT_ID U(8) +#define SOC_FW_KEY_CERT_ID U(9) +#define TRUSTED_OS_FW_KEY_CERT_ID U(10) +#define NON_TRUSTED_FW_KEY_CERT_ID U(11) + +#define SCP_FW_CONTENT_CERT_ID U(12) +#define SOC_FW_CONTENT_CERT_ID U(13) +#define TRUSTED_OS_FW_CONTENT_CERT_ID U(14) +#define NON_TRUSTED_FW_CONTENT_CERT_ID U(15) + +/* Non-Trusted ROM Firmware NS_BL1U */ +#define NS_BL1U_IMAGE_ID U(16) + +/* Trusted FWU Certificate */ +#define FWU_CERT_ID U(17) + +/* Trusted FWU SCP Firmware SCP_BL2U */ +#define SCP_BL2U_IMAGE_ID U(18) + +/* Trusted FWU Boot Firmware BL2U */ +#define BL2U_IMAGE_ID U(19) + +/* Non-Trusted FWU Firmware NS_BL2U */ +#define NS_BL2U_IMAGE_ID U(20) + +/* Secure Payload BL32_EXTRA1 (Trusted OS Extra1) */ +#define BL32_EXTRA1_IMAGE_ID U(21) + +/* Secure Payload BL32_EXTRA2 (Trusted OS Extra2) */ +#define BL32_EXTRA2_IMAGE_ID U(22) + +/* HW_CONFIG (e.g. Kernel DT) */ +#define HW_CONFIG_ID U(23) + +/* TB_FW_CONFIG */ +#define TB_FW_CONFIG_ID U(24) + +/* SOC_FW_CONFIG */ +#define SOC_FW_CONFIG_ID U(25) + +/* TOS_FW_CONFIG */ +#define TOS_FW_CONFIG_ID U(26) + +/* NT_FW_CONFIG */ +#define NT_FW_CONFIG_ID U(27) + +/* GPT Partition */ +#define GPT_IMAGE_ID U(28) + +/* Binary with STM32 header */ +#define STM32_IMAGE_ID U(29) + +/* Encrypted image identifier */ +#define ENC_IMAGE_ID U(30) + +/* FW_CONFIG */ +#define FW_CONFIG_ID U(31) + +/* + * Primary FWU metadata image ID + */ +#define FWU_METADATA_IMAGE_ID U(32) + +/* + * Backup FWU metadata image ID + */ +#define BKUP_FWU_METADATA_IMAGE_ID U(33) + +/* Realm Monitor Manager (RMM) */ +#define RMM_IMAGE_ID U(34) + +/* CCA Content Certificate ID */ +#define CCA_CONTENT_CERT_ID U(35) + +/* Core SWD Key Certificate ID */ +#define CORE_SWD_KEY_CERT_ID U(36) + +/* Platform Key Certificate ID */ +#define PLAT_KEY_CERT_ID U(37) + +/* Max Images */ +#define MAX_IMAGE_IDS U(38) + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_COMMON_TBBR_TBBR_IMG_DEF_EXP_H */ diff --git a/include/export/drivers/gpio_exp.h b/include/export/drivers/gpio_exp.h new file mode 100644 index 0000000..e4112a9 --- /dev/null +++ b/include/export/drivers/gpio_exp.h @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2019-2021, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_DRIVERS_GPIO_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_DRIVERS_GPIO_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +#define ARM_TF_GPIO_DIR_OUT 0 +#define ARM_TF_GPIO_DIR_IN 1 + +#define ARM_TF_GPIO_LEVEL_LOW 0 +#define ARM_TF_GPIO_LEVEL_HIGH 1 + +#define ARM_TF_GPIO_PULL_NONE 0 +#define ARM_TF_GPIO_PULL_UP 1 +#define ARM_TF_GPIO_PULL_DOWN 2 +#define ARM_TF_GPIO_PULL_REPEATER 3 + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_DRIVERS_GPIO_EXP_H */ diff --git a/include/export/lib/bl_aux_params/bl_aux_params_exp.h b/include/export/lib/bl_aux_params/bl_aux_params_exp.h new file mode 100644 index 0000000..7391dec --- /dev/null +++ b/include/export/lib/bl_aux_params/bl_aux_params_exp.h @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_LIB_BL_AUX_PARAMS_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_LIB_BL_AUX_PARAMS_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +#include "../../drivers/gpio_exp.h" + +/* + * This API implements a lightweight parameter passing mechanism that can be + * used to pass SoC Firmware configuration data from BL2 to BL31 by platforms or + * configurations that do not want to depend on libfdt. It is structured as a + * singly-linked list of parameter structures that all share the same common + * header but may have different (and differently-sized) structure bodies after + * that. The header contains a type field to indicate the parameter type (which + * is used to infer the structure length and how to interpret its contents) and + * a next pointer which contains the absolute physical address of the next + * parameter structure. The next pointer in the last structure block is set to + * NULL. The picture below shows how the parameters are kept in memory. + * + * head of list ---> +----------------+ --+ + * | type | | + * +----------------+ |--> struct bl_aux_param + * +----| next | | + * | +----------------+ --+ + * | | parameter data | + * | +----------------+ + * | + * +--> +----------------+ --+ + * | type | | + * +----------------+ |--> struct bl_aux_param + * NULL <---| next | | + * +----------------+ --+ + * | parameter data | + * +----------------+ + * + * Note: The SCTLR_EL3.A bit (Alignment fault check enable) is set in TF-A, so + * BL2 must ensure that each parameter struct starts on a 64-bit aligned address + * to avoid alignment faults. Parameters may be allocated in any address range + * accessible at the time of BL31 handoff (e.g. SRAM, DRAM, SoC-internal scratch + * registers, etc.), in particular address ranges that may not be mapped in + * BL31's page tables, so the parameter list must be parsed before the MMU is + * enabled and any information that is required at a later point should be + * deep-copied out into BL31-internal data structures. + */ + +enum bl_aux_param_type { + BL_AUX_PARAM_NONE = 0, + BL_AUX_PARAM_VENDOR_SPECIFIC_FIRST = 0x1, + /* 0x1 - 0x7fffffff can be used by vendor-specific handlers. */ + BL_AUX_PARAM_VENDOR_SPECIFIC_LAST = 0x7fffffff, + BL_AUX_PARAM_GENERIC_FIRST = 0x80000001, + BL_AUX_PARAM_COREBOOT_TABLE = BL_AUX_PARAM_GENERIC_FIRST, + /* 0x80000001 - 0xffffffff are reserved for the generic handler. */ + BL_AUX_PARAM_GENERIC_LAST = 0xffffffff, + /* Top 32 bits of the type field are reserved for future use. */ +}; + +/* common header for all BL aux parameters */ +struct bl_aux_param_header { + uint64_t type; + uint64_t next; +}; + +/* commonly useful parameter structures that can be shared by multiple types */ +struct bl_aux_param_uint64 { + struct bl_aux_param_header h; + uint64_t value; +}; + +struct bl_aux_gpio_info { + uint8_t polarity; + uint8_t direction; + uint8_t pull_mode; + uint8_t reserved; + uint32_t index; +}; + +struct bl_aux_param_gpio { + struct bl_aux_param_header h; + struct bl_aux_gpio_info gpio; +}; + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_LIB_BL_AUX_PARAMS_EXP_H */ diff --git a/include/export/lib/utils_def_exp.h b/include/export/lib/utils_def_exp.h new file mode 100644 index 0000000..d4a4a85 --- /dev/null +++ b/include/export/lib/utils_def_exp.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_LIB_UTILS_DEF_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_LIB_UTILS_DEF_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +/* + * For those constants to be shared between C and other sources, apply a 'U', + * 'UL', 'ULL', 'L' or 'LL' suffix to the argument only in C, to avoid + * undefined or unintended behaviour. + * + * The GNU assembler and linker do not support these suffixes (it causes the + * build process to fail) therefore the suffix is omitted when used in linker + * scripts and assembler files. +*/ +#if defined(__ASSEMBLER__) +# define U(_x) (_x) +# define UL(_x) (_x) +# define ULL(_x) (_x) +# define L(_x) (_x) +# define LL(_x) (_x) +#else +# define U_(_x) (_x##U) +# define U(_x) U_(_x) +# define UL(_x) (_x##UL) +# define ULL(_x) (_x##ULL) +# define L(_x) (_x##L) +# define LL(_x) (_x##LL) + +#endif + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_LIB_UTILS_DEF_EXP_H */ diff --git a/include/export/plat/mediatek/common/plat_params_exp.h b/include/export/plat/mediatek/common/plat_params_exp.h new file mode 100644 index 0000000..d650030 --- /dev/null +++ b/include/export/plat/mediatek/common/plat_params_exp.h @@ -0,0 +1,19 @@ +/* + * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_PLAT_MEDIATEK_COMMON_PLAT_PARAMS_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_PLAT_MEDIATEK_COMMON_PLAT_PARAMS_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +#include "../../../lib/bl_aux_params/bl_aux_params_exp.h" + +/* param type */ +enum bl_aux_mtk_param_type { + BL_AUX_PARAM_MTK_RESET_GPIO = BL_AUX_PARAM_VENDOR_SPECIFIC_FIRST, +}; + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_PLAT_MEDIATEK_COMMON_PLAT_PARAMS_EXP_H */ diff --git a/include/export/plat/rockchip/common/plat_params_exp.h b/include/export/plat/rockchip/common/plat_params_exp.h new file mode 100644 index 0000000..ccc9cd9 --- /dev/null +++ b/include/export/plat/rockchip/common/plat_params_exp.h @@ -0,0 +1,35 @@ +/* + * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef ARM_TRUSTED_FIRMWARE_EXPORT_PLAT_ROCKCHIP_COMMON_PLAT_PARAMS_EXP_H +#define ARM_TRUSTED_FIRMWARE_EXPORT_PLAT_ROCKCHIP_COMMON_PLAT_PARAMS_EXP_H + +/* EXPORT HEADER -- See include/export/README for details! -- EXPORT HEADER */ + +#include "../../../lib/bl_aux_params/bl_aux_params_exp.h" + +/* param type */ +enum bl_aux_rk_param_type { + BL_AUX_PARAM_RK_RESET_GPIO = BL_AUX_PARAM_VENDOR_SPECIFIC_FIRST, + BL_AUX_PARAM_RK_POWEROFF_GPIO, + BL_AUX_PARAM_RK_SUSPEND_GPIO, + BL_AUX_PARAM_RK_SUSPEND_APIO, +}; + +struct bl_aux_rk_apio_info { + uint8_t apio1 : 1; + uint8_t apio2 : 1; + uint8_t apio3 : 1; + uint8_t apio4 : 1; + uint8_t apio5 : 1; +}; + +struct bl_aux_param_rk_apio { + struct bl_aux_param_header h; + struct bl_aux_rk_apio_info apio; +}; + +#endif /* ARM_TRUSTED_FIRMWARE_EXPORT_PLAT_ROCKCHIP_COMMON_PLAT_PARAMS_EXP_H */ |