diff options
Diffstat (limited to '')
| -rw-r--r-- | include/plat/arm/board/common/board_css_def.h | 79 | ||||
| -rw-r--r-- | include/plat/arm/board/common/v2m_def.h | 140 |
2 files changed, 219 insertions, 0 deletions
diff --git a/include/plat/arm/board/common/board_css_def.h b/include/plat/arm/board/common/board_css_def.h new file mode 100644 index 0000000..1963bf0 --- /dev/null +++ b/include/plat/arm/board/common/board_css_def.h @@ -0,0 +1,79 @@ +/* + * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef BOARD_CSS_DEF_H +#define BOARD_CSS_DEF_H + +#include <lib/utils_def.h> +#include <plat/arm/board/common/v2m_def.h> +#include <plat/arm/soc/common/soc_css_def.h> +#include <plat/common/common_def.h> + +/* + * Definitions common to all ARM CSS-based development platforms + */ + +/* Platform ID address */ +#define BOARD_CSS_PLAT_ID_REG_ADDR 0x7ffe00e0 + +/* Platform ID related accessors */ +#define BOARD_CSS_PLAT_ID_REG_ID_MASK 0x0f +#define BOARD_CSS_PLAT_ID_REG_ID_SHIFT 0x0 +#define BOARD_CSS_PLAT_ID_REG_VERSION_MASK 0xf00 +#define BOARD_CSS_PLAT_ID_REG_VERSION_SHIFT 0x8 +#define BOARD_CSS_PLAT_TYPE_RTL 0x00 +#define BOARD_CSS_PLAT_TYPE_FPGA 0x01 +#define BOARD_CSS_PLAT_TYPE_EMULATOR 0x02 +#define BOARD_CSS_PLAT_TYPE_FVP 0x03 + +#ifndef __ASSEMBLER__ + +#include <lib/mmio.h> + +#define BOARD_CSS_GET_PLAT_TYPE(addr) \ + ((mmio_read_32(addr) & BOARD_CSS_PLAT_ID_REG_ID_MASK) \ + >> BOARD_CSS_PLAT_ID_REG_ID_SHIFT) + +#endif /* __ASSEMBLER__ */ + + +#define MAX_IO_DEVICES 3 +#define MAX_IO_HANDLES 4 + +/* Reserve the last block of flash for PSCI MEM PROTECT flag */ +#define PLAT_ARM_FLASH_IMAGE_BASE V2M_FLASH0_BASE +#define PLAT_ARM_FLASH_IMAGE_MAX_SIZE (V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE) + +#if ARM_GPT_SUPPORT +/* + * Offset of the FIP in the GPT image. BL1 component uses this option + * as it does not load the partition table to get the FIP base + * address. At sector 34 by default (i.e. after reserved sectors 0-33) + * Offset = 34 * 512(sector size) = 17408 i.e. 0x4400 + */ +#define PLAT_ARM_FIP_OFFSET_IN_GPT 0x4400 +#endif /* ARM_GPT_SUPPORT */ + +#define PLAT_ARM_NVM_BASE V2M_FLASH0_BASE +#define PLAT_ARM_NVM_SIZE (V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE) + +/* UART related constants */ +#define PLAT_ARM_BOOT_UART_BASE SOC_CSS_UART0_BASE +#define PLAT_ARM_BOOT_UART_CLK_IN_HZ SOC_CSS_UART0_CLK_IN_HZ + +#define PLAT_ARM_RUN_UART_BASE SOC_CSS_UART1_BASE +#define PLAT_ARM_RUN_UART_CLK_IN_HZ SOC_CSS_UART1_CLK_IN_HZ + +#define PLAT_ARM_SP_MIN_RUN_UART_BASE SOC_CSS_UART1_BASE +#define PLAT_ARM_SP_MIN_RUN_UART_CLK_IN_HZ SOC_CSS_UART1_CLK_IN_HZ + +#define PLAT_ARM_CRASH_UART_BASE PLAT_ARM_RUN_UART_BASE +#define PLAT_ARM_CRASH_UART_CLK_IN_HZ PLAT_ARM_RUN_UART_CLK_IN_HZ + +#define PLAT_ARM_TSP_UART_BASE V2M_IOFPGA_UART0_BASE +#define PLAT_ARM_TSP_UART_CLK_IN_HZ V2M_IOFPGA_UART0_CLK_IN_HZ + +#endif /* BOARD_CSS_DEF_H */ diff --git a/include/plat/arm/board/common/v2m_def.h b/include/plat/arm/board/common/v2m_def.h new file mode 100644 index 0000000..cb11dac --- /dev/null +++ b/include/plat/arm/board/common/v2m_def.h @@ -0,0 +1,140 @@ +/* + * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef V2M_DEF_H +#define V2M_DEF_H + +#include <lib/utils_def.h> + +/* Base address of all V2M */ +#ifdef PLAT_V2M_OFFSET +#define V2M_OFFSET PLAT_V2M_OFFSET +#else +#define V2M_OFFSET UL(0) +#endif + +/* V2M motherboard system registers & offsets */ +#define V2M_SYSREGS_BASE UL(0x1c010000) +#define V2M_SYS_ID UL(0x0) +#define V2M_SYS_SWITCH UL(0x4) +#define V2M_SYS_LED UL(0x8) +#define V2M_SYS_NVFLAGS UL(0x38) +#define V2M_SYS_NVFLAGSSET UL(0x38) +#define V2M_SYS_NVFLAGSCLR UL(0x3c) +#define V2M_SYS_CFGDATA UL(0xa0) +#define V2M_SYS_CFGCTRL UL(0xa4) +#define V2M_SYS_CFGSTATUS UL(0xa8) + +#define V2M_CFGCTRL_START BIT_32(31) +#define V2M_CFGCTRL_RW BIT_32(30) +#define V2M_CFGCTRL_FUNC_SHIFT 20 +#define V2M_CFGCTRL_FUNC(fn) ((fn) << V2M_CFGCTRL_FUNC_SHIFT) +#define V2M_FUNC_CLK_GEN U(0x01) +#define V2M_FUNC_TEMP U(0x04) +#define V2M_FUNC_DB_RESET U(0x05) +#define V2M_FUNC_SCC_CFG U(0x06) +#define V2M_FUNC_SHUTDOWN U(0x08) +#define V2M_FUNC_REBOOT U(0x09) + +/* NVFLAGS in the V2M motherboard which is preserved after a watchdog reset */ + #define V2M_SYS_NVFLAGS_ADDR (V2M_SYSREGS_BASE + V2M_SYS_NVFLAGS) + +/* + * V2M sysled bit definitions. The values written to this + * register are defined in arch.h & runtime_svc.h. Only + * used by the primary cpu to diagnose any cold boot issues. + * + * SYS_LED[0] - Security state (S=0/NS=1) + * SYS_LED[2:1] - Exception Level (EL3-EL0) + * SYS_LED[7:3] - Exception Class (Sync/Async & origin) + * + */ +#define V2M_SYS_LED_SS_SHIFT 0x0 +#define V2M_SYS_LED_EL_SHIFT 0x1 +#define V2M_SYS_LED_EC_SHIFT 0x3 + +#define V2M_SYS_LED_SS_MASK U(0x1) +#define V2M_SYS_LED_EL_MASK U(0x3) +#define V2M_SYS_LED_EC_MASK U(0x1f) + +/* V2M sysid register bits */ +#define V2M_SYS_ID_REV_SHIFT 28 +#define V2M_SYS_ID_HBI_SHIFT 16 +#define V2M_SYS_ID_BLD_SHIFT 12 +#define V2M_SYS_ID_ARCH_SHIFT 8 +#define V2M_SYS_ID_FPGA_SHIFT 0 + +#define V2M_SYS_ID_REV_MASK U(0xf) +#define V2M_SYS_ID_HBI_MASK U(0xfff) +#define V2M_SYS_ID_BLD_MASK U(0xf) +#define V2M_SYS_ID_ARCH_MASK U(0xf) +#define V2M_SYS_ID_FPGA_MASK U(0xff) + +#define V2M_SYS_ID_BLD_LENGTH 4 + + +/* NOR Flash */ +#define V2M_FLASH0_BASE (V2M_OFFSET + UL(0x08000000)) +#define V2M_FLASH0_SIZE UL(0x04000000) +#define V2M_FLASH_BLOCK_SIZE UL(0x00040000) /* 256 KB */ + +#define V2M_IOFPGA_BASE (V2M_OFFSET + UL(0x1c000000)) +#define V2M_IOFPGA_SIZE UL(0x03000000) + +/* PL011 UART related constants */ +#define V2M_IOFPGA_UART0_BASE (V2M_OFFSET + UL(0x1c090000)) +#define V2M_IOFPGA_UART1_BASE (V2M_OFFSET + UL(0x1c0a0000)) +#define V2M_IOFPGA_UART2_BASE (V2M_OFFSET + UL(0x1c0b0000)) +#define V2M_IOFPGA_UART3_BASE (V2M_OFFSET + UL(0x1c0c0000)) + +#define V2M_IOFPGA_UART0_CLK_IN_HZ 24000000 +#define V2M_IOFPGA_UART1_CLK_IN_HZ 24000000 +#define V2M_IOFPGA_UART2_CLK_IN_HZ 24000000 +#define V2M_IOFPGA_UART3_CLK_IN_HZ 24000000 + +/* SP804 timer related constants */ +#define V2M_SP804_TIMER0_BASE (V2M_OFFSET + UL(0x1C110000)) +#define V2M_SP804_TIMER1_BASE (V2M_OFFSET + UL(0x1C120000)) + +/* SP810 controller */ +#define V2M_SP810_BASE (V2M_OFFSET + UL(0x1c020000)) +#define V2M_SP810_CTRL_TIM0_SEL BIT_32(15) +#define V2M_SP810_CTRL_TIM1_SEL BIT_32(17) +#define V2M_SP810_CTRL_TIM2_SEL BIT_32(19) +#define V2M_SP810_CTRL_TIM3_SEL BIT_32(21) + +/* + * The flash can be mapped either as read-only or read-write. + * + * If it is read-write then it should also be mapped as device memory because + * NOR flash programming involves sending a fixed, ordered sequence of commands. + * + * If it is read-only then it should also be mapped as: + * - Normal memory, because reading from NOR flash is transparent, it is like + * reading from RAM. + * - Non-executable by default. If some parts of the flash need to be executable + * then platform code is responsible for re-mapping the appropriate portion + * of it as executable. + */ +#define V2M_MAP_FLASH0_RW MAP_REGION_FLAT(V2M_FLASH0_BASE,\ + V2M_FLASH0_SIZE, \ + MT_DEVICE | MT_RW | MT_SECURE) + +#define V2M_MAP_FLASH0_RO MAP_REGION_FLAT(V2M_FLASH0_BASE,\ + V2M_FLASH0_SIZE, \ + MT_RO_DATA | MT_SECURE) + +#define V2M_MAP_IOFPGA MAP_REGION_FLAT(V2M_IOFPGA_BASE,\ + V2M_IOFPGA_SIZE, \ + MT_DEVICE | MT_RW | MT_SECURE) + +/* Region equivalent to V2M_MAP_IOFPGA suitable for mapping at EL0 */ +#define V2M_MAP_IOFPGA_EL0 MAP_REGION_FLAT( \ + V2M_IOFPGA_BASE, \ + V2M_IOFPGA_SIZE, \ + MT_DEVICE | MT_RW | MT_SECURE | MT_USER) + + +#endif /* V2M_DEF_H */ |