diff options
Diffstat (limited to '')
-rw-r--r-- | plat/arm/board/arm_fpga/aarch64/fpga_helpers.S | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/plat/arm/board/arm_fpga/aarch64/fpga_helpers.S b/plat/arm/board/arm_fpga/aarch64/fpga_helpers.S new file mode 100644 index 0000000..20120c9 --- /dev/null +++ b/plat/arm/board/arm_fpga/aarch64/fpga_helpers.S @@ -0,0 +1,167 @@ +/* + * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <arch.h> +#include <asm_macros.S> +#include <common/bl_common.h> +#include "../fpga_private.h" + +#include <platform_def.h> + + .globl plat_get_my_entrypoint + .globl plat_secondary_cold_boot_setup + .globl plat_is_my_cpu_primary + .globl platform_mem_init + .globl plat_my_core_pos + .globl plat_crash_console_init + .globl plat_crash_console_putc + .globl plat_crash_console_flush + .globl plat_fpga_calc_core_pos + +/* ----------------------------------------------------------------------- + * Indicate a cold boot for every CPU - warm boot is unsupported for the + * holding pen PSCI implementation. + * ----------------------------------------------------------------------- + */ +func plat_get_my_entrypoint + mov x0, #0 + ret +endfunc plat_get_my_entrypoint + +/* ----------------------------------------------------------------------- + * void plat_secondary_cold_boot_setup (void); + * ----------------------------------------------------------------------- + */ +func plat_secondary_cold_boot_setup + + /* + * Wait for the primary processor to initialise the .BSS segment + * to avoid a race condition that would erase fpga_valid_mpids + * if it is populated before the C runtime is ready. + * + * We cannot use the current spin-lock implementation until the + * runtime is up and we should not rely on sevl/wfe instructions as + * it is optional whether they are implemented or not, so we use + * a global variable as lock and wait for the primary processor to + * finish the C runtime bring-up. + */ + + ldr w0, =C_RUNTIME_READY_KEY + adrp x1, secondary_core_spinlock + add x1, x1, :lo12:secondary_core_spinlock +1: + wfe + ldr w2, [x1] + cmp w2, w0 + b.ne 1b + /* Prevent reordering of the store into fpga_valid_mpids below */ + dmb ish + + mov x10, x30 + bl plat_my_core_pos + mov x30, x10 + + adrp x4, fpga_valid_mpids + add x4, x4, :lo12:fpga_valid_mpids + mov x5, #VALID_MPID + strb w5, [x4, x0] + + /* + * Poll the CPU's hold entry until it indicates to jump + * to the entrypoint address. + */ + + adrp x1, hold_base + add x1, x1, :lo12:hold_base +poll_hold_entry: + ldr x3, [x1, x0, LSL #PLAT_FPGA_HOLD_ENTRY_SHIFT] + cmp x3, #PLAT_FPGA_HOLD_STATE_GO + b.ne 1f + + adrp x2, fpga_sec_entrypoint + add x2, x2, :lo12:fpga_sec_entrypoint + ldr x3, [x2] + br x3 +1: + wfe + b poll_hold_entry + +endfunc plat_secondary_cold_boot_setup + +/* ----------------------------------------------------------------------- + * unsigned int plat_is_my_cpu_primary (void); + * + * Find out whether the current cpu is the primary cpu + * ----------------------------------------------------------------------- + */ +func plat_is_my_cpu_primary + mrs x0, mpidr_el1 + mov_imm x1, MPIDR_AFFINITY_MASK + and x0, x0, x1 + cmp x0, #FPGA_PRIMARY_CPU + cset w0, eq + ret +endfunc plat_is_my_cpu_primary + +func platform_mem_init + ret +endfunc platform_mem_init + +func plat_my_core_pos + ldr x1, =(MPID_MASK & ~(MPIDR_AFFLVL_MASK << MPIDR_AFF3_SHIFT)) + mrs x0, mpidr_el1 + and x0, x0, x1 + b plat_fpga_calc_core_pos + +endfunc plat_my_core_pos + +/* ----------------------------------------------------------------------- + * unsigned int plat_fpga_calc_core_pos (uint32_t mpid) + * Clobber registers: x0 to x5 + * ----------------------------------------------------------------------- + */ +func plat_fpga_calc_core_pos + /* + * Check for MT bit in MPIDR, which may be either value for images + * running on the FPGA. + * + * If not set, shift MPIDR to left to make it look as if in a + * multi-threaded implementation. + * + */ + tst x0, #MPIDR_MT_MASK + lsl x3, x0, #MPIDR_AFFINITY_BITS + csel x3, x3, x0, eq + + /* Extract individual affinity fields from MPIDR */ + ubfx x0, x3, #MPIDR_AFF0_SHIFT, #MPIDR_AFFINITY_BITS + ubfx x1, x3, #MPIDR_AFF1_SHIFT, #MPIDR_AFFINITY_BITS + ubfx x2, x3, #MPIDR_AFF2_SHIFT, #MPIDR_AFFINITY_BITS + + mov x4, #FPGA_MAX_CPUS_PER_CLUSTER + mov x5, #FPGA_MAX_PE_PER_CPU + + /* Compute linear position */ + madd x1, x2, x4, x1 + madd x0, x1, x5, x0 + + ret +endfunc plat_fpga_calc_core_pos + +func plat_crash_console_init + mov_imm x0, PLAT_FPGA_CRASH_UART_BASE + b console_pl011_core_init +endfunc plat_crash_console_init + +func plat_crash_console_putc + mov_imm x1, PLAT_FPGA_CRASH_UART_BASE + b console_pl011_core_putc +endfunc plat_crash_console_putc + +func plat_crash_console_flush + mov_imm x0, PLAT_FPGA_CRASH_UART_BASE + b console_pl011_core_flush +endfunc plat_crash_console_flush |