1 files changed, 126 insertions, 0 deletions
diff --git a/plat/arm/board/corstone1000/common/corstone1000_plat.c b/plat/arm/board/corstone1000/common/corstone1000_plat.c
new file mode 100644
index 0000000..0235f8b
--- /dev/null
+++ b/plat/arm/board/corstone1000/common/corstone1000_plat.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2021-2022, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/bl_common.h>
+
+#include <drivers/generic_delay_timer.h>
+#include <drivers/io/io_storage.h>
+#include <plat/common/platform.h>
+#include <plat/arm/common/arm_fconf_getter.h>
+#include <plat/arm/common/arm_fconf_io_storage.h>
+#include <plat/arm/common/plat_arm.h>
+#include <platform_def.h>
+
+/*
+ * Table of regions to map using the MMU.
+ * Replace or extend the below regions as required
+ */
+
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	ARM_MAP_NS_SHARED_RAM,
+	ARM_MAP_NS_DRAM1,
+	CORSTONE1000_MAP_DEVICE,
+	CORSTONE1000_EXTERNAL_FLASH,
+	{0}
+};
+
+static void set_fip_image_source(void)
+{
+	const struct plat_io_policy *policy;
+	/*
+	 * metadata for firmware update is written at 0x0000 offset of the flash.
+	 * PLAT_ARM_BOOT_BANK_FLAG contains the boot bank that TF-M is booted.
+	 * As per firmware update spec, at a given point of time, only one bank
+	 * is active. This means, TF-A should boot from the same bank as TF-M.
+	 */
+	volatile uint32_t *boot_bank_flag = (uint32_t *)(PLAT_ARM_BOOT_BANK_FLAG);
+
+	if (*boot_bank_flag > 1) {
+		VERBOSE("Boot_bank is set higher than possible values");
+	}
+
+	VERBOSE("Boot bank flag = %u.\n\r", *boot_bank_flag);
+
+	policy = FCONF_GET_PROPERTY(arm, io_policies, FIP_IMAGE_ID);
+
+	assert(policy != NULL);
+	assert(policy->image_spec != 0UL);
+
+	io_block_spec_t *spec = (io_block_spec_t *)policy->image_spec;
+
+	if ((*boot_bank_flag) == 0) {
+		VERBOSE("Booting from bank 0: fip offset = 0x%lx\n\r",
+						PLAT_ARM_FIP_BASE_BANK0);
+		spec->offset = PLAT_ARM_FIP_BASE_BANK0;
+	} else {
+		VERBOSE("Booting from bank 1: fip offset = 0x%lx\n\r",
+						PLAT_ARM_FIP_BASE_BANK1);
+		spec->offset = PLAT_ARM_FIP_BASE_BANK1;
+	}
+}
+
+void bl2_platform_setup(void)
+{
+	arm_bl2_platform_setup();
+	/*
+	 * Identify the start address of the FIP by reading the boot
+	 * index flag from the flash.
+	 */
+	set_fip_image_source();
+}
+
+/* corstone1000 only has one always-on power domain and there
+ * is no power control present
+ */
+void __init plat_arm_pwrc_setup(void)
+{
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	/* Returning the Generic Timer Frequency */
+	return SYS_COUNTER_FREQ_IN_TICKS;
+}
+
+
+/*
+ * Helper function to initialize ARM interconnect driver.
+ */
+void plat_arm_interconnect_init(void)
+{
+}
+
+/*
+ * Helper function to place current master into coherency
+ */
+void plat_arm_interconnect_enter_coherency(void)
+{
+}
+
+/*
+ * Helper function to remove current master from coherency
+ */
+void plat_arm_interconnect_exit_coherency(void)
+{
+}
+
+/*
+ * This function is invoked during Mbed TLS library initialisation to get a heap
+ * The function simply returns the default allocated heap.
+ */
+
+#if TRUSTED_BOARD_BOOT
+int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
+{
+	assert(heap_addr != NULL);
+	assert(heap_size != NULL);
+
+	return arm_get_mbedtls_heap(heap_addr, heap_size);
+}
+#endif