diff options
Diffstat (limited to '')
-rw-r--r-- | plat/arm/board/fvp/fvp_bl2_measured_boot.c | 234 |
1 files changed, 234 insertions, 0 deletions
diff --git a/plat/arm/board/fvp/fvp_bl2_measured_boot.c b/plat/arm/board/fvp/fvp_bl2_measured_boot.c new file mode 100644 index 0000000..e938e24 --- /dev/null +++ b/plat/arm/board/fvp/fvp_bl2_measured_boot.c @@ -0,0 +1,234 @@ +/* + * Copyright (c) 2021-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <stdint.h> + +#include <common/tbbr/tbbr_img_def.h> +#include <drivers/measured_boot/event_log/event_log.h> +#include <drivers/measured_boot/rss/rss_measured_boot.h> +#include <tools_share/tbbr_oid.h> +#include <fvp_critical_data.h> + +#include <plat/arm/common/plat_arm.h> +#include <plat/common/common_def.h> + +/* Event Log data */ +static uint64_t event_log_base; + +/* FVP table with platform specific image IDs, names and PCRs */ +const event_log_metadata_t fvp_event_log_metadata[] = { + { BL31_IMAGE_ID, EVLOG_BL31_STRING, PCR_0 }, + { BL32_IMAGE_ID, EVLOG_BL32_STRING, PCR_0 }, + { BL32_EXTRA1_IMAGE_ID, EVLOG_BL32_EXTRA1_STRING, PCR_0 }, + { BL32_EXTRA2_IMAGE_ID, EVLOG_BL32_EXTRA2_STRING, PCR_0 }, + { BL33_IMAGE_ID, EVLOG_BL33_STRING, PCR_0 }, + { HW_CONFIG_ID, EVLOG_HW_CONFIG_STRING, PCR_0 }, + { NT_FW_CONFIG_ID, EVLOG_NT_FW_CONFIG_STRING, PCR_0 }, + { SCP_BL2_IMAGE_ID, EVLOG_SCP_BL2_STRING, PCR_0 }, + { SOC_FW_CONFIG_ID, EVLOG_SOC_FW_CONFIG_STRING, PCR_0 }, + { TOS_FW_CONFIG_ID, EVLOG_TOS_FW_CONFIG_STRING, PCR_0 }, + { RMM_IMAGE_ID, EVLOG_RMM_STRING, PCR_0}, + +#if defined(SPD_spmd) + { SP_PKG1_ID, EVLOG_SP1_STRING, PCR_0 }, + { SP_PKG2_ID, EVLOG_SP2_STRING, PCR_0 }, + { SP_PKG3_ID, EVLOG_SP3_STRING, PCR_0 }, + { SP_PKG4_ID, EVLOG_SP4_STRING, PCR_0 }, + { SP_PKG5_ID, EVLOG_SP5_STRING, PCR_0 }, + { SP_PKG6_ID, EVLOG_SP6_STRING, PCR_0 }, + { SP_PKG7_ID, EVLOG_SP7_STRING, PCR_0 }, + { SP_PKG8_ID, EVLOG_SP8_STRING, PCR_0 }, +#endif + + { CRITICAL_DATA_ID, EVLOG_CRITICAL_DATA_STRING, PCR_1 }, + + { EVLOG_INVALID_ID, NULL, (unsigned int)(-1) } /* Terminator */ +}; + +/* FVP table with platform specific image IDs and metadata. Intentionally not a + * const struct, some members might set by bootloaders during trusted boot. + */ +struct rss_mboot_metadata fvp_rss_mboot_metadata[] = { + { + .id = BL31_IMAGE_ID, + .slot = U(9), + .signer_id_size = SIGNER_ID_MIN_SIZE, + .sw_type = RSS_MBOOT_BL31_STRING, + .lock_measurement = true }, + { + .id = HW_CONFIG_ID, + .slot = U(10), + .signer_id_size = SIGNER_ID_MIN_SIZE, + .sw_type = RSS_MBOOT_HW_CONFIG_STRING, + .lock_measurement = true }, + { + .id = SOC_FW_CONFIG_ID, + .slot = U(11), + .signer_id_size = SIGNER_ID_MIN_SIZE, + .sw_type = RSS_MBOOT_SOC_FW_CONFIG_STRING, + .lock_measurement = true }, + { + .id = RMM_IMAGE_ID, + .slot = U(12), + .signer_id_size = SIGNER_ID_MIN_SIZE, + .sw_type = RSS_MBOOT_RMM_STRING, + .lock_measurement = true }, + { + .id = RSS_MBOOT_INVALID_ID } +}; + +void bl2_plat_mboot_init(void) +{ + uint8_t *event_log_start; + uint8_t *event_log_finish; + size_t bl1_event_log_size; + int rc; + + rc = arm_get_tb_fw_info(&event_log_base, &bl1_event_log_size); + if (rc != 0) { + ERROR("%s(): Unable to get Event Log info from TB_FW_CONFIG\n", + __func__); + /* + * It is a fatal error because on FVP platform, BL2 software + * assumes that a valid Event Log buffer exist and it will use + * same Event Log buffer to append image measurements. + */ + panic(); + } + + /* + * BL1 and BL2 share the same Event Log buffer and that BL2 will + * append its measurements after BL1's + */ + event_log_start = (uint8_t *)((uintptr_t)event_log_base + + bl1_event_log_size); + event_log_finish = (uint8_t *)((uintptr_t)event_log_base + + PLAT_ARM_EVENT_LOG_MAX_SIZE); + + event_log_init((uint8_t *)event_log_start, event_log_finish); + + rss_measured_boot_init(); +} + +int plat_mboot_measure_critical_data(unsigned int critical_data_id, + const void *base, size_t size) +{ + /* + * It is very unlikely that the critical data size would be + * bigger than 2^32 bytes + */ + assert(size < UINT32_MAX); + assert(base != NULL); + + /* Calculate image hash and record data in Event Log */ + int err = event_log_measure_and_record((uintptr_t)base, (uint32_t)size, + critical_data_id); + if (err != 0) { + ERROR("%s%s critical data (%i)\n", + "Failed to ", "record", err); + return err; + } + + return 0; +} + +#if TRUSTED_BOARD_BOOT +static int fvp_populate_critical_data(struct fvp_critical_data *critical_data) +{ + char *nv_ctr_oids[MAX_NV_CTR_IDS] = { + [TRUSTED_NV_CTR_ID] = TRUSTED_FW_NVCOUNTER_OID, + [NON_TRUSTED_NV_CTR_ID] = NON_TRUSTED_FW_NVCOUNTER_OID, + }; + + for (int i = 0; i < MAX_NV_CTR_IDS; i++) { + int rc = plat_get_nv_ctr(nv_ctr_oids[i], + &critical_data->nv_ctr[i]); + if (rc != 0) { + return rc; + } + } + + return 0; +} +#endif /* TRUSTED_BOARD_BOOT */ + +static int fvp_populate_and_measure_critical_data(void) +{ + int rc = 0; + +/* + * FVP platform only measures 'platform NV-counter' and hence its + * measurement makes sense during Trusted-Boot flow only. + */ +#if TRUSTED_BOARD_BOOT + struct fvp_critical_data populate_critical_data; + + rc = fvp_populate_critical_data(&populate_critical_data); + if (rc == 0) { + rc = plat_mboot_measure_critical_data(CRITICAL_DATA_ID, + &populate_critical_data, + sizeof(populate_critical_data)); + } +#endif /* TRUSTED_BOARD_BOOT */ + + return rc; +} + +void bl2_plat_mboot_finish(void) +{ + int rc; + + /* Event Log address in Non-Secure memory */ + uintptr_t ns_log_addr; + + /* Event Log filled size */ + size_t event_log_cur_size; + + rc = fvp_populate_and_measure_critical_data(); + if (rc != 0) { + panic(); + } + + event_log_cur_size = event_log_get_cur_size((uint8_t *)event_log_base); + + rc = arm_set_nt_fw_info( +#ifdef SPD_opteed + (uintptr_t)event_log_base, +#endif + event_log_cur_size, &ns_log_addr); + if (rc != 0) { + ERROR("%s(): Unable to update %s_FW_CONFIG\n", + __func__, "NT"); + /* + * It is a fatal error because on FVP secure world software + * assumes that a valid event log exists and will use it to + * record the measurements into the fTPM. + * Note: In FVP platform, OP-TEE uses nt_fw_config to get the + * secure Event Log buffer address. + */ + panic(); + } + + /* Copy Event Log to Non-secure memory */ + (void)memcpy((void *)ns_log_addr, (const void *)event_log_base, + event_log_cur_size); + + /* Ensure that the Event Log is visible in Non-secure memory */ + flush_dcache_range(ns_log_addr, event_log_cur_size); + +#if defined(SPD_tspd) || defined(SPD_spmd) + /* Set Event Log data in TOS_FW_CONFIG */ + rc = arm_set_tos_fw_info((uintptr_t)event_log_base, + event_log_cur_size); + if (rc != 0) { + ERROR("%s(): Unable to update %s_FW_CONFIG\n", + __func__, "TOS"); + panic(); + } +#endif /* defined(SPD_tspd) || defined(SPD_spmd) */ + + dump_event_log((uint8_t *)event_log_base, event_log_cur_size); +} |