1 files changed, 121 insertions, 0 deletions
diff --git a/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c b/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c
new file mode 100644
index 0000000..9ab36a6
--- /dev/null
+++ b/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2016-2022, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <bl32/sp_min/platform_sp_min.h>
+#include <common/debug.h>
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
+#include <plat/arm/common/plat_arm.h>
+
+#include "../fvp_private.h"
+
+void plat_arm_sp_min_early_platform_setup(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
+{
+	const struct dyn_cfg_dtb_info_t *tos_fw_config_info __unused;
+
+	/* Initialize the console to provide early debug support */
+	arm_console_boot_init();
+
+#if !RESET_TO_SP_MIN && !BL2_AT_EL3
+
+	INFO("SP_MIN FCONF: FW_CONFIG address = %lx\n", (uintptr_t)arg1);
+	/* Fill the properties struct with the info from the config dtb */
+	fconf_populate("FW_CONFIG", arg1);
+
+	tos_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TOS_FW_CONFIG_ID);
+	if (tos_fw_config_info != NULL) {
+		arg1 = tos_fw_config_info->config_addr;
+	}
+#endif /* !RESET_TO_SP_MIN && !BL2_AT_EL3 */
+
+	arm_sp_min_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+
+	/*
+	 * Initialize the correct interconnect for this cluster during cold
+	 * boot. No need for locks as no other CPU is active.
+	 */
+	fvp_interconnect_init();
+
+	/*
+	 * Enable coherency in interconnect for the primary CPU's cluster.
+	 * Earlier bootloader stages might already do this (e.g. Trusted
+	 * Firmware's BL1 does it) but we can't assume so. There is no harm in
+	 * executing this code twice anyway.
+	 * FVP PSCI code will enable coherency for other clusters.
+	 */
+	fvp_interconnect_enable();
+}
+
+void sp_min_plat_arch_setup(void)
+{
+	int rc __unused;
+	const struct dyn_cfg_dtb_info_t *hw_config_info __unused;
+	uintptr_t hw_config_base_align __unused;
+	size_t mapped_size_align __unused;
+
+	arm_sp_min_plat_arch_setup();
+
+	/*
+	 * For RESET_TO_SP_MIN systems, SP_MIN(BL32) is the first bootloader
+	 * to run. So there is no BL2 to load the HW_CONFIG dtb into memory
+	 * before control is passed to SP_MIN.
+	 * Also, BL2 skips loading HW_CONFIG dtb for BL2_AT_EL3 builds.
+	 * The code below relies on dynamic mapping capability, which is not
+	 * supported by xlat tables lib V1.
+	 * TODO: remove the ARM_XLAT_TABLES_LIB_V1 check when its support
+	 * gets deprecated.
+	 */
+#if !RESET_TO_SP_MIN && !BL2_AT_EL3 && !ARM_XLAT_TABLES_LIB_V1
+	hw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, HW_CONFIG_ID);
+	assert(hw_config_info != NULL);
+	assert(hw_config_info->config_addr != 0UL);
+
+	INFO("SP_MIN FCONF: HW_CONFIG address = %p\n",
+	     (void *)hw_config_info->config_addr);
+
+	/*
+	 * Preferrably we expect this address and size are page aligned,
+	 * but if they are not then align it.
+	 */
+	hw_config_base_align = page_align(hw_config_info->config_addr, DOWN);
+	mapped_size_align = page_align(hw_config_info->config_max_size, UP);
+
+	if ((hw_config_info->config_addr != hw_config_base_align) &&
+	    (hw_config_info->config_max_size == mapped_size_align)) {
+		mapped_size_align += PAGE_SIZE;
+	}
+
+	/*
+	 * map dynamically HW config region with its aligned base address and
+	 * size
+	 */
+	rc = mmap_add_dynamic_region((unsigned long long)hw_config_base_align,
+				     hw_config_base_align,
+				     mapped_size_align,
+				     MT_RO_DATA);
+	if (rc != 0) {
+		ERROR("Error while mapping HW_CONFIG device tree (%d).\n", rc);
+		panic();
+	}
+
+	/* Populate HW_CONFIG device tree with the mapped address */
+	fconf_populate("HW_CONFIG", hw_config_info->config_addr);
+
+	/* unmap the HW_CONFIG memory region */
+	rc = mmap_remove_dynamic_region(hw_config_base_align, mapped_size_align);
+	if (rc != 0) {
+		ERROR("Error while unmapping HW_CONFIG device tree (%d).\n",
+		      rc);
+		panic();
+	}
+#endif /* !RESET_TO_SP_MIN && !BL2_AT_EL3 && !ARM_XLAT_TABLES_LIB_V1 */
+}