diff options
Diffstat (limited to '')
| -rw-r--r-- | plat/brcm/board/stingray/include/sr_def.h | 624 |
1 files changed, 624 insertions, 0 deletions
diff --git a/plat/brcm/board/stingray/include/sr_def.h b/plat/brcm/board/stingray/include/sr_def.h new file mode 100644 index 0000000..277836e --- /dev/null +++ b/plat/brcm/board/stingray/include/sr_def.h @@ -0,0 +1,624 @@ +/* + * Copyright (c) 2016-2021, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef SR_DEF_H +#define SR_DEF_H + +#ifndef __ASSEMBLER__ +#include <lib/mmio.h> +#endif + +#include <common/interrupt_props.h> +#include <drivers/arm/gic_common.h> + +#include <crmu_def.h> + +/* Special value used to verify platform parameters from BL2 to BL3-1 */ +#define BRCM_BL31_PLAT_PARAM_VAL ULL(0x0f1e2d3c4b5a6978) + +#define MHB_BASE_ADDR 0x60000000 +#define PLAT_BRCM_CCN_BASE 0x61000000 +#define CORESIGHT_BASE_ADDR 0x62000000 +#define SMMU_BASE 0x64000000 + +/* memory map entries*/ +/* Grouping block device for bigger MMU region */ +/* covers MHB, CNN, coresight, GIC, MMU, APB, CRMU */ +#define PERIPH0_BASE MHB_BASE_ADDR +#define PERIPH0_SIZE 0x06d00000 + +#define PERIPH1_BASE 0x66d80000 +#define PERIPH1_SIZE 0x00f80000 + +#define HSLS_BASE_ADDR 0x68900000 +#define HSLS_SIZE 0x04500000 + +#define GIC500_BASE 0x63c00000 +#define GIC500_SIZE 0x400000 + +/******************************************************************************* + * CCN related constants + ******************************************************************************/ +#define OLY_MN_REGISTERS_NODE0_SECURE_ACCESS (PLAT_BRCM_CCN_BASE + 0x0) + +#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x880500) + +/* Used for acceleration of coherent ordered writes */ +#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WUO BIT(4) +/* Wait for completion of requests at RN-I */ +#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WFC BIT(3) + +/* + * Forces all reads from the RN-I to be sent with the request order bit set + * and this ensures ordered allocation of read data buffers in the RN-I + */ +#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_RQO BIT(5) + +#define OLY_RNI3PDVM_REGISTERS_NODE14_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x8e0500) + +/* Wait for completion of requests at RN-I */ +#define OLY_RNI3PDVM_REGISTERS_NODE14_AUX_CTL_WFC BIT(3) + +#define OLY_HNI_REGISTERS_NODE0_POS_CONTROL (PLAT_BRCM_CCN_BASE + 0x80000) +#define POS_CONTROL_HNI_POS_EN BIT(0) + +#define OLY_HNI_REGISTERS_NODE0_PCIERC_RNI_NODEID_LIST \ + (PLAT_BRCM_CCN_BASE + 0x80008) +/* PAXB and PAXC connected to 8th Node */ +#define SR_RNI_PCIE_CONNECTED BIT(8) +/* PAXB connected to 6th Node */ +#define SRP_RNI_PCIE_CONNECTED BIT(6) + +#define OLY_HNI_REGISTERS_NODE0_SA_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x80500) +#define SA_AUX_CTL_POS_EARLY_WR_COMP_EN BIT(5) +#define SA_AUX_CTL_SER_DEVNE_WR BIT(9) + +/******************************************************************************* + * Coresight related constants + ******************************************************************************/ +#define CORESIGHT_BASE_ADDR 0x62000000 + +#define IHOST0_BASE 0x66000000 +#define IHOST_ADDR_SPACE 0x2000 + +/******************************************************************************* + * SCR related constants + ******************************************************************************/ +#define SCR_BASE 0x6600a000 +#define SCR_ARCACHE_OFFSET 4 +#define SCR_ARCACHE_MASK (0x3 << SCR_ARCACHE_OFFSET) +#define SCR_AWCACHE_OFFSET 6 +#define SCR_AWCACHE_MASK (0x3 << SCR_AWCACHE_OFFSET) +#define SCR_AXCACHE_CONFIG_MASK (SCR_ARCACHE_MASK | SCR_AWCACHE_MASK) +#define SCR_TBUX_AXCACHE_CONFIG ((0x1 << SCR_AWCACHE_OFFSET) | \ + (0x1 << SCR_ARCACHE_OFFSET)) + +#define SCR_REGS_SCR_SOFT_RESET (SCR_BASE + 0x1c) +#define SCR_REGS_GIC_SOFT_RESET BIT(0) + +#define SCR_GPV_BASE 0x66100000 +#define SCR_NOC_SECURITY0 (SCR_GPV_BASE + 0x08) +#define SCR_NOC_DDR_REGISTER_ACCESS (SCR_GPV_BASE + 0x30) + +/******************************************************************************* + * MEMC and DDR related constants + ******************************************************************************/ +#define DDR0_CONTROL_ROOT 0x66200000 +#define EMEM_SS_CFG_0_ROOT 0x66202000 +#define EMEM_SYS_IF_0_ROOT 0x66204000 +#define DDR_PHY0_ROOT 0x66240000 + +#define DDR1_CONTROL_ROOT 0x66280000 +#define EMEM_SS_CFG_1_ROOT 0x66282000 +#define EMEM_SYS_IF_1_ROOT 0x66284000 +#define DDR_PHY1_ROOT 0x662c0000 + +#define DDR2_CONTROL_ROOT 0x66300000 +#define EMEM_SS_CFG_2_ROOT 0x66302000 +#define EMEM_SYS_IF_2_ROOT 0x66304000 +#define DDR_PHY2_ROOT 0x66340000 + +/******************************************************************************* + * TZC400 related constants + ******************************************************************************/ +#define TZC_400_BASE 0x66d84000 + +/******************************************************************************* + * FS4 related constants + ******************************************************************************/ +#define FS4_SRAM_IDM_IO_CONTROL_DIRECT 0x66d8a408 + +#define FS4_CRYPTO_IDM_IO_CONTROL_DIRECT 0x66d8e408 +#define FS4_CRYPTO_IDM_RESET_CONTROL 0x66d8e800 +#define FS4_CRYPTO_BASE 0x67000000 +#define FS4_CRYPTO_DME_BASE (FS4_CRYPTO_BASE + 0x280000) + +#define FS4_RAID_IDM_IO_CONTROL_DIRECT 0x66d8f408 +#define FS4_RAID_IDM_IO_STATUS 0x66d8f500 +#define FS4_RAID_IDM_RESET_CONTROL 0x66d8f800 +#define FS4_RAID_BASE 0x67400000 +#define FS4_RAID_DME_BASE (FS4_RAID_BASE + 0x280000) + +#define FS4_CRYPTO_GPV_BASE 0x67300000 +#define FS4_RAID_GPV_BASE 0x67700000 + +#define FS6_PKI_BASE 0x67400000 +#define FS6_PKI_DME_BASE 0x66D90000 + +#define TZC400_FS_SRAM_ROOT 0x66d84000 +#define GATE_KEEPER_OFFSET 0x8 +#define REGION_ATTRIBUTES_0_OFFSET 0x110 +#define REGION_ID_ACCESS_0_OFFSET 0x114 + +#define NIC400_FS_NOC_ROOT 0x66e00000 +#define NIC400_FS_NOC_SECURITY2_OFFSET 0x10 +#define NIC400_FS_NOC_SECURITY4_OFFSET 0x18 +#define NIC400_FS_NOC_SECURITY7_OFFSET 0x24 + +/******************************************************************************* + * SATA PHY related constants + ******************************************************************************/ +#define SATA_BASE 0x67d00000 + +/******************************************************************************* + * USB related constants + ******************************************************************************/ +#define USB_BASE 0x68500000 +#define USB_SIZE 0x00400000 +#define XHC_BASE (USB_BASE + 0x11000) +#define MAX_USB_PORTS 3 + +/******************************************************************************* + * HSLS related constants + ******************************************************************************/ +#define IPROC_ROOT 0x68900000 +#define HSLS_ICFG_REGS_BASE IPROC_ROOT +#define HSLS_IDM_REGS_BASE 0x68e00000 +#define HSLS_MODE_SEL_CONTROL 0x68a40000 +#define HSLS_TZPC_BASE 0x68b40000 +#define HSLS_GPV_BASE 0x6cd00000 + +/******************************************************************************* + * Chip ID related constants + ******************************************************************************/ +#define ICFG_CHIP_ID HSLS_ICFG_REGS_BASE +#define CHIP_ID_SR 0xd730 +#define CHIP_ID_NS3Z 0xe56d +#define CHIP_ID_MASK 0xf000 +#define ICFG_CHIP_REVISION_ID (HSLS_ICFG_REGS_BASE + 0x4) +#define PLAT_CHIP_ID_GET (mmio_read_32(ICFG_CHIP_ID)) +#define PLAT_CHIP_REV_GET (mmio_read_32(ICFG_CHIP_REVISION_ID)) + +/******************************************************************************* + * CMIC MII (MDIO) related constant + ******************************************************************************/ +#define PLAT_CMIC_MIIM_BASE 0x68920000U + +/******************************************************************************* + * Timers related constants + ******************************************************************************/ +/* ChipcommonG_tim0_TIM_TIMER1Load 0x68930000 */ +#define SP804_TIMER0_BASE 0x68930000 +#define SP804_TIMER1_BASE 0x68940000 +#define SP804_TIMER0_TIMER_VAL_REG_OFFSET 0x4 +#define SP804_TIMER0_CLKMULT 2 +#define SP804_TIMER0_CLKDIV 25 + +/******************************************************************************* + * GPIO related constants + ******************************************************************************/ +#define IPROC_GPIO_NS_BASE 0x689d0000 +#define IPROC_GPIO_S_BASE 0x68b00000 +#define IPROC_GPIO_NR 151 +#define GPIO_S_CNTRL_REG 0x68b60000 + +/******************************************************************************* + * I2C SMBUS related constants + ******************************************************************************/ +#define SMBUS0_REGS_BASE 0x689b0000 +#define SMBUS1_REGS_BASE 0x689e0000 + +/******************************************************************************* + * UART related constants + ******************************************************************************/ +#define ChipcommonG_UART0_UART_RBR_THR_DLL 0x68a00000 +#define ChipcommonG_UART1_UART_RBR_THR_DLL 0x68a10000 +#define ChipcommonG_UART2_UART_RBR_THR_DLL 0x68a20000 +#define ChipcommonG_UART3_UART_RBR_THR_DLL 0x68a30000 + +#define UART0_BASE_ADDR ChipcommonG_UART0_UART_RBR_THR_DLL +#define UART1_BASE_ADDR ChipcommonG_UART1_UART_RBR_THR_DLL +#define UART2_BASE_ADDR ChipcommonG_UART2_UART_RBR_THR_DLL +#define UART3_BASE_ADDR ChipcommonG_UART3_UART_RBR_THR_DLL + +#define UART_SPR_OFFSET 0x1c /* Scratch Pad Register */ + +#define LOG_LEVEL_REGISTER CRMU_SPARE_REG_3 +#define GET_LOG_LEVEL() (mmio_read_32(LOG_LEVEL_REGISTER)) +#define SET_LOG_LEVEL(x) (mmio_write_32(LOG_LEVEL_REGISTER, x)) + +#define IO_RETRY_REGISTER CRMU_SPARE_REG_4 + +#define DWC_UART_REFCLK (25 * 1000 * 1000) +#define DWC_UART_REFCLK_DIV 16 +/* Baud rate in emulation will vary based on setting of 25MHz SCLK */ +#define DWC_UART_BAUDRATE 115200 + +#define BRCM_CRASH_CONSOLE_BASE UART1_BASE_ADDR +#define BRCM_CRASH_CONSOLE_REFCLK DWC_UART_REFCLK +#define BRCM_CRASH_CONSOLE_BAUDRATE DWC_UART_BAUDRATE + +#ifdef BOARD_CONSOLE_UART +#define PLAT_BRCM_BOOT_UART_BASE BOARD_CONSOLE_UART +#else +#define PLAT_BRCM_BOOT_UART_BASE UART1_BASE_ADDR +#endif +#define CONSOLE_UART_ID ((PLAT_BRCM_BOOT_UART_BASE >> 16) & 0x3) + +#define PLAT_BRCM_BOOT_UART_CLK_IN_HZ DWC_UART_REFCLK +#define BRCM_CONSOLE_BAUDRATE DWC_UART_BAUDRATE + +#define PLAT_BRCM_BL31_RUN_UART_BASE PLAT_BRCM_BOOT_UART_BASE +#define PLAT_BRCM_BL31_RUN_UART_CLK_IN_HZ PLAT_BRCM_BOOT_UART_CLK_IN_HZ + +/******************************************************************************* + * IOMUX related constants + ******************************************************************************/ +#define HSLS_IOPAD_BASE HSLS_MODE_SEL_CONTROL +#define MODE_SEL_CONTROL_FSEL_MASK 0x7 +#define MODE_SEL_CONTROL_FSEL_MODE0 0x0 +#define MODE_SEL_CONTROL_FSEL_MODE1 0x1 +#define MODE_SEL_CONTROL_FSEL_MODE2 0x2 +#define MODE_SEL_CONTROL_FSEL_MODE3 0x3 +#define MODE_SEL_CONTROL_FSEL_DEBUG 0x4 +#define IPROC_IOPAD_MODE_BASE (HSLS_MODE_SEL_CONTROL + 0x29c) +#define UART0_SIN_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x4a8) +#define UART0_SOUT_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x4ac) +#define UART1_SIN_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3b8) +#define UART1_SOUT_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3bc) +#define UARTx_SIN_MODE_SEL_CONTROL_FSEL 0 +#define UARTx_SOUT_MODE_SEL_CONTROL_FSEL 0 + +/******************************************************************************* + * PKA constants + ******************************************************************************/ +#define ICFG_PKA_MEM_PWR_CTRL (HSLS_ICFG_REGS_BASE + 0xac0) +#define ICFG_PKA_MEM_PWR_CTRL__POWERONIN BIT(0) +#define ICFG_PKA_MEM_PWR_CTRL__POWEROKIN BIT(1) +#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONIN BIT(2) +#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKIN BIT(3) +#define ICFG_PKA_MEM_PWR_CTRL__POWERONOUT BIT(4) +#define ICFG_PKA_MEM_PWR_CTRL__POWEROKOUT BIT(5) +#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONOUT BIT(6) +#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKOUT BIT(7) +#define ICFG_PKA_MEM_PWR_CTRL__ISO BIT(8) + +/******************************************************************************* + * RNG constants + ******************************************************************************/ +#define RNG_BASE_ADDR 0x68b20000 + +/******************************************************************************* + * Trusted Watchdog constants + ******************************************************************************/ +#define ARM_SP805_TWDG_BASE 0x68b30000 +#define ARM_SP805_TWDG_CLK_HZ ((25 * 1000 * 1000) / 2) +/* + * The TBBR document specifies a watchdog timeout of 256 seconds. SP805 + * asserts reset after two consecutive countdowns (2 x 128 = 256 sec) + */ +#define ARM_TWDG_TIMEOUT_SEC 128 +#define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \ + ARM_TWDG_TIMEOUT_SEC) + +/******************************************************************************* + * SOTP related constants + ******************************************************************************/ +#define SOTP_REGS_OTP_BASE 0x68b50000 +#define SOTP_CHIP_CTRL (SOTP_REGS_OTP_BASE + 0x4c) +#define SOTP_CLEAR_SYSCTRL_ALL_MASTER_NS 0 + +/******************************************************************************* + * DMAC/PL330 related constants + ******************************************************************************/ +#define DMAC_M0_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x408) +#define BOOT_MANAGER_NS BIT(25) +#define DMAC_M0_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0x800) +#define ICFG_DMAC_CONFIG_0 (HSLS_ICFG_REGS_BASE + 0x190) +#define ICFG_DMAC_CONFIG_1 (HSLS_ICFG_REGS_BASE + 0x194) +#define ICFG_DMAC_CONFIG_2 (HSLS_ICFG_REGS_BASE + 0x198) +#define BOOT_PERIPHERAL_NS 0xffffffff +#define ICFG_DMAC_CONFIG_3 (HSLS_ICFG_REGS_BASE + 0x19c) +#define BOOT_IRQ_NS 0x0000ffff +#define ICFG_DMAC_SID_ARADDR_CONTROL (HSLS_ICFG_REGS_BASE + 0xaf0) +#define ICFG_DMAC_SID_AWADDR_CONTROL (HSLS_ICFG_REGS_BASE + 0xaf4) +#define ICFG_DMAC_MEM_PWR_CTRL__POWERONIN BIT(0) +#define ICFG_DMAC_MEM_PWR_CTRL__POWEROKIN BIT(1) +#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONIN BIT(2) +#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKIN BIT(3) +#define ICFG_DMAC_MEM_PWR_CTRL__POWERONOUT BIT(4) +#define ICFG_DMAC_MEM_PWR_CTRL__POWEROKOUT BIT(5) +#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONOUT BIT(6) +#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKOUT BIT(7) +#define ICFG_DMAC_MEM_PWR_CTRL__ISO BIT(8) +#define ICFG_DMAC_MEM_PWR_CTRL (HSLS_ICFG_REGS_BASE + 0xadc) + +/******************************************************************************* + * PNOR related constants + ******************************************************************************/ +#define PNOR_ICFG_BASE (HSLS_ICFG_REGS_BASE + 0x780) +#define PNOR_ICFG_CS_0 PNOR_ICFG_BASE +#define PNOR_ICFG_CS_1 (PNOR_ICFG_BASE + 0x4) +#define PNOR_ICFG_CS_2 (PNOR_ICFG_BASE + 0x8) +#define PNOR_ICFG_CS_x_MASK0_MASK 0xff +#define PNOR_ICFG_CS_x_MASK0_SHIFT 8 +#define PNOR_ICFG_CS_x_MATCH0_MASK 0xff +#define PNOR_ICFG_CS_x_MATCH0_SHIFT 0 + +#define PNOR_IDM_BASE (HSLS_IDM_REGS_BASE + 0xb000) +#define PNOR_IDM_IO_CONTROL_DIRECT (PNOR_IDM_BASE + 0x408) +#define PNOR_IDM_IO_RESET_CONTROL (PNOR_IDM_BASE + 0x800) + +#define PNOR_REG_BASE 0x68c50000 +#define PNOR_REG_DIRECT_CMD (PNOR_REG_BASE + 0x010) +#define PNOR_REG_SET_CYCLES (PNOR_REG_BASE + 0x014) +#define PNOR_REG_SET_OPMODE (PNOR_REG_BASE + 0x018) +#define PNOR_REG_REFRESH_0 (PNOR_REG_BASE + 0x020) +#define PNOR_REG_PERIPH_ID0 (PNOR_REG_BASE + 0xfe0) +#define PNOR_REG_PERIPH_ID1 (PNOR_REG_BASE + 0xfe4) +#define PNOR_REG_PERIPH_ID2 (PNOR_REG_BASE + 0xfe8) +#define PNOR_REG_PERIPH_ID3 (PNOR_REG_BASE + 0xfec) +#define PNOR_REG_PERIPH_IDx_MASK 0xff + +/******************************************************************************* + * NAND related constants + ******************************************************************************/ +#define NAND_FLASH_REVISION 0x68c60000 +#define NAND_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0xa408) +#define NAND_IDM_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xa800) + +/******************************************************************************* + * eMMC related constants + ******************************************************************************/ +#define PLAT_SD_MAX_READ_LENGTH 0x400 + +#define SDIO0_EMMCSDXC_SYSADDR 0x68cf1000 +#define SDIO_IDM0_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x2408) +#define SDIO_IDM1_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x3408) +#define SDIO_IDM0_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0x2800) +#define ICFG_SDIO0_BASE (HSLS_ICFG_REGS_BASE + 0x6e4) +#define ICFG_SDIO1_BASE (HSLS_ICFG_REGS_BASE + 0x734) +#define ICFG_SDIO0_CAP0 (ICFG_SDIO0_BASE + 0x10) +#define ICFG_SDIO0_CAP1 (ICFG_SDIO0_BASE + 0x14) +#define ICFG_SDIO0_SID (HSLS_ICFG_REGS_BASE + 0xb00) +#define ICFG_SDIO1_SID (HSLS_ICFG_REGS_BASE + 0xb08) + +/******************************************************************************* + * Bootstrap related constants + ******************************************************************************/ +#define ROM_S0_IDM_IO_STATUS (HSLS_IDM_REGS_BASE + 0x9500) + +/******************************************************************************* + * ROM related constants + ******************************************************************************/ +#define ROM_BASE_ADDR 0x6ce00000 +#define ROM_VERSION_STRING_ADDR (ROM_BASE_ADDR + 0x28000) +#define ROM_BUILD_MESSAGE_ADDR (ROM_BASE_ADDR + 0x28018) + +/******************************************************************************* + * Boot source peripheral related constants + ******************************************************************************/ +#define QSPI_CTRL_BASE_ADDR 0x68c70000 +#define QSPI_BASE_ADDR 0x70000000 +#define QSPI_SIZE 0x08000000 +#define NOR_BASE_ADDR 0x74000000 +#define NOR_SIZE 0x04000000 +#define NAND_BASE_ADDR 0x78000000 +#define NAND_SIZE 0x08000000 + +#define QSPI_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xc800) + +#define APBR_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xe800) +#define APBS_IDM_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xf800) + +#define APBX_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x10408) +#define APBX_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0 +#define APBX_IDM_IDM_IO_CONTROL_DIRECT_WDOG_SCLK_SEL 2 +#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM0_SCLK_SEL 4 +#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM1_SCLK_SEL 6 +#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM2_SCLK_SEL 8 +#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM3_SCLK_SEL 10 +#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM4_SCLK_SEL 12 +#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM5_SCLK_SEL 13 +#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM6_SCLK_SEL 14 +#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM7_SCLK_SEL 15 + +#define APBY_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x11408) +#define APBY_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0 +#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART0_SCLK_SEL 2 +#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART1_SCLK_SEL 4 +#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART2_SCLK_SEL 6 +#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART3_SCLK_SEL 8 + +#define APBZ_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x12408) +#define APBZ_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0 +#define APBZ_IDM_IDM_IO_CONTROL_DIRECT_WDOG_SCLK_SEL 2 + +/******************************************************************************* + * Stingray memory map related constants + ******************************************************************************/ + +/* The last 4KB of Trusted SRAM are used as shared memory */ +#define BRCM_SHARED_RAM_SIZE 0x0 +#define BRCM_SHARED_RAM_BASE (PLAT_BRCM_TRUSTED_SRAM_BASE + \ + PLAT_BRCM_TRUSTED_SRAM_SIZE - \ + BRCM_SHARED_RAM_SIZE) + +/* Reserve 4 KB to store error logs in BL2 */ +#define BCM_ELOG_BL2_SIZE 0x00001000 +#define BCM_ELOG_BL2_BASE BL1_RW_LIMIT + +/* The remaining Trusted SRAM is used to load the BL images */ +#define BRCM_BL_RAM_BASE (PLAT_BRCM_TRUSTED_SRAM_BASE) +#define BRCM_BL_RAM_SIZE (PLAT_BRCM_TRUSTED_SRAM_SIZE - \ + BRCM_SHARED_RAM_SIZE) + +/* DDR Address where TMON temperature values are written */ +#define TMON_SHARED_DDR_ADDRESS 0x8f100000 + +/* Reserve 4 kB to pass data to BL33 */ +#define BL33_SHARED_DDR_BASE 0x8f102000 +#define BL33_SHARED_DDR_SIZE 0x1000 + +/* Default AP error logging base addr */ +#ifndef ELOG_AP_UART_LOG_BASE +#define ELOG_AP_UART_LOG_BASE 0x8f110000 +#endif + +/* Reserve 16 to store error logs in BL31 */ +#define BCM_ELOG_BL31_BASE ELOG_AP_UART_LOG_BASE +#define BCM_ELOG_BL31_SIZE 0x4000 + +/******************************************************************************* + * Non-secure DDR Map + ******************************************************************************/ +#define BRCM_DRAM1_BASE ULL(0x80000000) +#define BRCM_DRAM1_SIZE ULL(0x10000000) +#define BRCM_DRAM2_BASE ULL(0x880000000) +#define BRCM_DRAM2_SIZE ULL(0x780000000) +#define BRCM_DRAM3_BASE ULL(0x8800000000) +#define BRCM_DRAM3_SIZE ULL(0x7800000000) +#define BRCM_SHARED_DRAM_BASE BL33_SHARED_DDR_BASE +#define BRCM_SHARED_DRAM_SIZE BL33_SHARED_DDR_SIZE +#define BRCM_EXT_SRAM_BASE ULL(0x74000000) +#define BRCM_EXT_SRAM_SIZE ULL(0x4000000) + +/* Priority levels for platforms */ +#define PLAT_RAS_PRI 0x10 +#define PLAT_SDEI_CRITICAL_PRI 0x60 +#define PLAT_SDEI_NORMAL_PRI 0x70 + +/* Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 */ +#define BRCM_IRQ_SEC_SGI_0 14 +#define BRCM_IRQ_SEC_SGI_1 15 + +/* RTC periodic interrupt */ +#define BRCM_IRQ_SEC_SPI_0 49 + +/* + * Macros for local power states in SR platforms encoded by State-ID field + * within the power-state parameter. + */ + +/* Local power state for power domains in Run state. */ +#define PLAT_LOCAL_STATE_RUN 0 + +/* Local power state for retention. Valid only for CPU power domains */ +#define PLAT_LOCAL_STATE_RET 1 + +/* + * Local power state for OFF/power-down. Valid for CPU and cluster power + * domains. + */ +#define PLAT_LOCAL_STATE_OFF 2 + +/* + * This macro defines the deepest retention state possible. A higher state + * id will represent an invalid or a power down state. + */ +#define PLAT_MAX_RET_STATE PLAT_LOCAL_STATE_RET + +/* + * This macro defines the deepest power down states possible. Any state ID + * higher than this is invalid. + */ +#define PLAT_MAX_OFF_STATE PLAT_LOCAL_STATE_OFF + +/* ChiMP-related constants */ + +#define NITRO_TZPC_TZPCDECPROT0clr 0x60c01808 +#define NITRO_TZPC_TZPCDECPROT0clr__DECPROT0_chimp_m_clr_R 1 + +#define NIC400_NITRO_CHIMP_S_IDM_IO_CONTROL_DIRECT 0x60e00408 + +#define CHIMP_INDIRECT_ADDR_MASK 0x3fffff +#define CHIMP_INDIRECT_BASE 0x60800000 + +#define CHIMP_REG_ECO_RESERVED 0x3042400 + +#define CHIMP_FLASH_ACCESS_DONE_BIT 2 + +/* indicate FRU table programming is done successfully */ +#define CHIMP_FRU_PROG_DONE_BIT 9 + +#define CHIMP_REG_CTRL_BPE_MODE_REG 0x0 +#define CHIMP_REG_CTRL_BPE_STAT_REG 0x4 +#define CHIMP_REG_CTRL_FSTBOOT_PTR_REG 0x8 +#define CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_L 1 +#define CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_R 1 +#define CHIMP_REG_CTRL_BASE 0x3040000 +#define CHIMP_FAST_BOOT_MODE_BIT 2 +#define CHIMP_REG_CHIMP_APE_SCPAD 0x3300000 +#define CHIMP_REG_CHIMP_SCPAD 0x3100000 + +/* Chimp health status offset in scratch pad ram */ +#define CHIMP_HEALTH_STATUS_OFFSET 0x8 +/* + * If not in NIC mode then FASTBOOT can be enabled. + * "Not in NIC mode" means that FORCE_FASTBOOT is set + * and a valid (1 or 2) fastboot type is specified. + * + * Three types of fastboot are supported: + * 0 = No fastboot. Boots Nitro/ChiMP and lets ROM loader + * initialize ChiMP from NVRAM (QSPI). + * + * 1 = Jump in place (need a flat image) + * This is intended to speedup Nitro FW boot on Palladium, + * can be used with a real chip as well. + * 2 = Jump normally with decompression + * Modus operandi for a real chip. Works also on Palladium + * Note: image decompressing takes time on Palladium. + * 3 = No fastboot support. No ChiMP bringup + * (use only for AP debug or for ChiMP's deferred setup). + */ +#define CHIMP_FASTBOOT_JUMP_DECOMPRESS 2 +#define CHIMP_FASTBOOT_JUMP_IN_PLACE 1 +#define CHIMP_FASTBOOT_NITRO_RESET 0 +/* + * Definitions for a non-Nitro access + * to QSPI PAD after the handshake + */ +#define QSPI_HOLD_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3e8) +#define QSPI_WP_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3ec) +#define QSPI_SCK_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f0) +#define QSPI_CS_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f4) +#define QSPI_MOSI_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f8) +#define QSPI_MISO_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3fc) + +/******************************************************************************* + * Stream IDs for different blocks of SR + * block_id for different blocks is as follows: + * PCIE : 0x0 + * PAXC : 0x1 + * FS4 : 0x2 + * Rest of the masters(includes MHB via RNI): 0x3 + ******************************************************************************/ +#define SR_SID_VAL(block_id, subblock_id, device_num) ((block_id << 13) | \ + (subblock_id << 11) | \ + (device_num)) + +#define CRMU_STREAM_ID SR_SID_VAL(0x3, 0x0, 0x7) +#define CRMU_SID_SHIFT 5 + +#define DMAC_STREAM_ID SR_SID_VAL(0x3, 0x0, 0x0) +#define DMAC_SID_SHIFT 5 + +/* DDR SHMOO Values defines */ +#define IDRAM_SHMOO_VALUES_ADDR CRMU_IDRAM_BASE_ADDR +#define DDR_SHMOO_VALUES_ADDR 0x8f103000 +#define SHMOO_SIZE_PER_CHANNEL 0x1000 + +#endif /* SR_DEF_H */ |