summaryrefslogtreecommitdiffstats
path: root/plat/brcm
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--plat/brcm/board/common/bcm_console.c65
-rw-r--r--plat/brcm/board/common/bcm_elog.c268
-rw-r--r--plat/brcm/board/common/bcm_elog_ddr.c133
-rw-r--r--plat/brcm/board/common/bcm_elog_ddr.h107
-rw-r--r--plat/brcm/board/common/board_arm_trusted_boot.c625
-rw-r--r--plat/brcm/board/common/board_common.c74
-rw-r--r--plat/brcm/board/common/board_common.mk294
-rw-r--r--plat/brcm/board/common/brcm_mbedtls.c12
-rw-r--r--plat/brcm/board/common/chip_id.h37
-rw-r--r--plat/brcm/board/common/cmn_plat_def.h82
-rw-r--r--plat/brcm/board/common/cmn_plat_util.h43
-rw-r--r--plat/brcm/board/common/cmn_sec.c49
-rw-r--r--plat/brcm/board/common/cmn_sec.h19
-rw-r--r--plat/brcm/board/common/err.c37
-rw-r--r--plat/brcm/board/common/plat_setup.c27
-rw-r--r--plat/brcm/board/common/platform_common.c94
-rw-r--r--plat/brcm/board/common/sbl_util.c40
-rw-r--r--plat/brcm/board/common/sbl_util.h19
-rw-r--r--plat/brcm/board/common/timer_sync.c71
-rw-r--r--plat/brcm/board/stingray/aarch64/plat_helpers.S263
-rw-r--r--plat/brcm/board/stingray/bcm958742t-ns3.mk22
-rw-r--r--plat/brcm/board/stingray/bcm958742t.mk19
-rw-r--r--plat/brcm/board/stingray/driver/ddr/soc/include/board_family.h33
-rw-r--r--plat/brcm/board/stingray/driver/ext_sram_init/ext_sram_init.c302
-rw-r--r--plat/brcm/board/stingray/driver/ext_sram_init/ext_sram_init.h11
-rw-r--r--plat/brcm/board/stingray/driver/ihost_pll_config.c287
-rw-r--r--plat/brcm/board/stingray/driver/plat_emmc.c109
-rw-r--r--plat/brcm/board/stingray/driver/sr_usb.h135
-rw-r--r--plat/brcm/board/stingray/driver/swreg.c375
-rw-r--r--plat/brcm/board/stingray/driver/usb.c296
-rw-r--r--plat/brcm/board/stingray/driver/usb_phy.c601
-rw-r--r--plat/brcm/board/stingray/include/bl33_info.h38
-rw-r--r--plat/brcm/board/stingray/include/board_info.h38
-rw-r--r--plat/brcm/board/stingray/include/crmu_def.h227
-rw-r--r--plat/brcm/board/stingray/include/ddr_init.h39
-rw-r--r--plat/brcm/board/stingray/include/fsx.h37
-rw-r--r--plat/brcm/board/stingray/include/ihost_pm.h19
-rw-r--r--plat/brcm/board/stingray/include/iommu.h19
-rw-r--r--plat/brcm/board/stingray/include/ncsi.h32
-rw-r--r--plat/brcm/board/stingray/include/paxb.h74
-rw-r--r--plat/brcm/board/stingray/include/paxc.h23
-rw-r--r--plat/brcm/board/stingray/include/plat_macros.S52
-rw-r--r--plat/brcm/board/stingray/include/platform_def.h268
-rw-r--r--plat/brcm/board/stingray/include/platform_sotp.h36
-rw-r--r--plat/brcm/board/stingray/include/platform_usb.h19
-rw-r--r--plat/brcm/board/stingray/include/scp_cmd.h25
-rw-r--r--plat/brcm/board/stingray/include/scp_utils.h34
-rw-r--r--plat/brcm/board/stingray/include/sdio.h247
-rw-r--r--plat/brcm/board/stingray/include/sr_def.h624
-rw-r--r--plat/brcm/board/stingray/include/sr_utils.h42
-rw-r--r--plat/brcm/board/stingray/include/swreg.h36
-rw-r--r--plat/brcm/board/stingray/include/timer_sync.h12
-rw-r--r--plat/brcm/board/stingray/include/usb_phy.h244
-rw-r--r--plat/brcm/board/stingray/platform.mk304
-rw-r--r--plat/brcm/board/stingray/src/bl2_setup.c743
-rw-r--r--plat/brcm/board/stingray/src/bl31_setup.c1071
-rw-r--r--plat/brcm/board/stingray/src/brcm_pm_ops.c408
-rw-r--r--plat/brcm/board/stingray/src/fsx.c477
-rw-r--r--plat/brcm/board/stingray/src/ihost_pm.c355
-rw-r--r--plat/brcm/board/stingray/src/iommu.c536
-rw-r--r--plat/brcm/board/stingray/src/ncsi.c54
-rw-r--r--plat/brcm/board/stingray/src/paxb.c911
-rw-r--r--plat/brcm/board/stingray/src/paxc.c267
-rw-r--r--plat/brcm/board/stingray/src/pm.c131
-rw-r--r--plat/brcm/board/stingray/src/scp_cmd.c60
-rw-r--r--plat/brcm/board/stingray/src/scp_utils.c227
-rw-r--r--plat/brcm/board/stingray/src/sdio.c144
-rw-r--r--plat/brcm/board/stingray/src/sr_paxb_phy.c806
-rw-r--r--plat/brcm/board/stingray/src/topology.c52
-rw-r--r--plat/brcm/board/stingray/src/tz_sec.c153
-rw-r--r--plat/brcm/common/brcm_bl2_mem_params_desc.c106
-rw-r--r--plat/brcm/common/brcm_bl2_setup.c202
-rw-r--r--plat/brcm/common/brcm_bl31_setup.c291
-rw-r--r--plat/brcm/common/brcm_ccn.c36
-rw-r--r--plat/brcm/common/brcm_common.c59
-rw-r--r--plat/brcm/common/brcm_gicv3.c91
-rw-r--r--plat/brcm/common/brcm_image_load.c41
-rw-r--r--plat/brcm/common/brcm_io_storage.c408
-rw-r--r--plat/brcm/common/brcm_mhu.c131
-rw-r--r--plat/brcm/common/brcm_mhu.h19
-rw-r--r--plat/brcm/common/brcm_scpi.c252
-rw-r--r--plat/brcm/common/brcm_scpi.h107
82 files changed, 15176 insertions, 0 deletions
diff --git a/plat/brcm/board/common/bcm_console.c b/plat/brcm/board/common/bcm_console.c
new file mode 100644
index 0000000..5f20094
--- /dev/null
+++ b/plat/brcm/board/common/bcm_console.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <drivers/ti/uart/uart_16550.h>
+
+#include <platform_def.h>
+
+/*******************************************************************************
+ * Functions that set up the console
+ ******************************************************************************/
+static console_t bcm_boot_console;
+static console_t bcm_runtime_console;
+
+/* Initialize the console to provide early debug support */
+void bcm_console_boot_init(void)
+{
+ int rc = console_16550_register(PLAT_BRCM_BOOT_UART_BASE,
+ PLAT_BRCM_BOOT_UART_CLK_IN_HZ,
+ BRCM_CONSOLE_BAUDRATE,
+ &bcm_boot_console);
+ if (rc == 0) {
+ /*
+ * The crash console doesn't use the multi console API, it uses
+ * the core console functions directly. It is safe to call panic
+ * and let it print debug information.
+ */
+ panic();
+ }
+
+ console_set_scope(&bcm_boot_console, CONSOLE_FLAG_BOOT);
+}
+
+void bcm_console_boot_end(void)
+{
+ console_flush();
+
+ (void)console_unregister(&bcm_boot_console);
+}
+
+/* Initialize the runtime console */
+void bcm_console_runtime_init(void)
+{
+ int rc = console_16550_register(PLAT_BRCM_BL31_RUN_UART_BASE,
+ PLAT_BRCM_BL31_RUN_UART_CLK_IN_HZ,
+ BRCM_CONSOLE_BAUDRATE,
+ &bcm_runtime_console);
+ if (rc == 0)
+ panic();
+
+ console_set_scope(&bcm_runtime_console, CONSOLE_FLAG_RUNTIME);
+}
+
+void bcm_console_runtime_end(void)
+{
+ console_flush();
+
+ (void)console_unregister(&bcm_runtime_console);
+}
diff --git a/plat/brcm/board/common/bcm_elog.c b/plat/brcm/board/common/bcm_elog.c
new file mode 100644
index 0000000..093157e
--- /dev/null
+++ b/plat/brcm/board/common/bcm_elog.c
@@ -0,0 +1,268 @@
+/*
+ * Copyright (c) 2018 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdarg.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <plat/common/platform.h>
+
+#include <bcm_elog.h>
+
+/* error logging signature */
+#define BCM_ELOG_SIG_OFFSET 0x0000
+#define BCM_ELOG_SIG_VAL 0x75767971
+
+/* current logging offset that points to where new logs should be added */
+#define BCM_ELOG_OFF_OFFSET 0x0004
+
+/* current logging length (excluding header) */
+#define BCM_ELOG_LEN_OFFSET 0x0008
+
+#define BCM_ELOG_HEADER_LEN 12
+
+/*
+ * @base: base address of memory where log is saved
+ * @max_size: max size of memory reserved for logging
+ * @is_active: indicates logging is currently active
+ * @level: current logging level
+ */
+struct bcm_elog {
+ uintptr_t base;
+ uint32_t max_size;
+ unsigned int is_active;
+ unsigned int level;
+};
+
+static struct bcm_elog global_elog;
+
+extern void memcpy16(void *dst, const void *src, unsigned int len);
+
+/*
+ * Log one character
+ */
+static void elog_putchar(struct bcm_elog *elog, unsigned char c)
+{
+ uint32_t offset, len;
+
+ offset = mmio_read_32(elog->base + BCM_ELOG_OFF_OFFSET);
+ len = mmio_read_32(elog->base + BCM_ELOG_LEN_OFFSET);
+ mmio_write_8(elog->base + offset, c);
+ offset++;
+
+ /* log buffer is now full and need to wrap around */
+ if (offset >= elog->max_size)
+ offset = BCM_ELOG_HEADER_LEN;
+
+ /* only increment length when log buffer is not full */
+ if (len < elog->max_size - BCM_ELOG_HEADER_LEN)
+ len++;
+
+ mmio_write_32(elog->base + BCM_ELOG_OFF_OFFSET, offset);
+ mmio_write_32(elog->base + BCM_ELOG_LEN_OFFSET, len);
+}
+
+static void elog_unsigned_num(struct bcm_elog *elog, unsigned long unum,
+ unsigned int radix)
+{
+ /* Just need enough space to store 64 bit decimal integer */
+ unsigned char num_buf[20];
+ int i = 0, rem;
+
+ do {
+ rem = unum % radix;
+ if (rem < 0xa)
+ num_buf[i++] = '0' + rem;
+ else
+ num_buf[i++] = 'a' + (rem - 0xa);
+ } while (unum /= radix);
+
+ while (--i >= 0)
+ elog_putchar(elog, num_buf[i]);
+}
+
+static void elog_string(struct bcm_elog *elog, const char *str)
+{
+ while (*str)
+ elog_putchar(elog, *str++);
+}
+
+/*
+ * Routine to initialize error logging
+ */
+int bcm_elog_init(void *base, uint32_t size, unsigned int level)
+{
+ struct bcm_elog *elog = &global_elog;
+ uint32_t val;
+
+ elog->base = (uintptr_t)base;
+ elog->max_size = size;
+ elog->is_active = 1;
+ elog->level = level / 10;
+
+ /*
+ * If a valid signature can be found, it means logs have been copied
+ * into designated memory by another software. In this case, we should
+ * not re-initialize the entry header in the designated memory
+ */
+ val = mmio_read_32(elog->base + BCM_ELOG_SIG_OFFSET);
+ if (val != BCM_ELOG_SIG_VAL) {
+ mmio_write_32(elog->base + BCM_ELOG_SIG_OFFSET,
+ BCM_ELOG_SIG_VAL);
+ mmio_write_32(elog->base + BCM_ELOG_OFF_OFFSET,
+ BCM_ELOG_HEADER_LEN);
+ mmio_write_32(elog->base + BCM_ELOG_LEN_OFFSET, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * Routine to disable error logging
+ */
+void bcm_elog_exit(void)
+{
+ struct bcm_elog *elog = &global_elog;
+
+ if (!elog->is_active)
+ return;
+
+ elog->is_active = 0;
+
+ flush_dcache_range(elog->base, elog->max_size);
+}
+
+/*
+ * Routine to copy error logs from current memory to 'dst' memory and continue
+ * logging from the new 'dst' memory.
+ * dst and base addresses must be 16-bytes aligned.
+ */
+int bcm_elog_copy_log(void *dst, uint32_t max_size)
+{
+ struct bcm_elog *elog = &global_elog;
+ uint32_t offset, len;
+
+ if (!elog->is_active || ((uintptr_t)dst == elog->base))
+ return -1;
+
+ /* flush cache before copying logs */
+ flush_dcache_range(elog->base, max_size);
+
+ /*
+ * If current offset exceeds the new max size, then that is considered
+ * as a buffer overflow situation. In this case, we reset the offset
+ * back to the beginning
+ */
+ offset = mmio_read_32(elog->base + BCM_ELOG_OFF_OFFSET);
+ if (offset >= max_size) {
+ offset = BCM_ELOG_HEADER_LEN;
+ mmio_write_32(elog->base + BCM_ELOG_OFF_OFFSET, offset);
+ }
+
+ /* note payload length does not include header */
+ len = mmio_read_32(elog->base + BCM_ELOG_LEN_OFFSET);
+ if (len > max_size - BCM_ELOG_HEADER_LEN) {
+ len = max_size - BCM_ELOG_HEADER_LEN;
+ mmio_write_32(elog->base + BCM_ELOG_LEN_OFFSET, len);
+ }
+
+ /* Need to copy everything including the header. */
+ memcpy16(dst, (const void *)elog->base, len + BCM_ELOG_HEADER_LEN);
+ elog->base = (uintptr_t)dst;
+ elog->max_size = max_size;
+
+ return 0;
+}
+
+/*
+ * Main routine to save logs into memory
+ */
+void bcm_elog(const char *fmt, ...)
+{
+ va_list args;
+ const char *prefix_str;
+ int bit64;
+ int64_t num;
+ uint64_t unum;
+ char *str;
+ struct bcm_elog *elog = &global_elog;
+
+ /* We expect the LOG_MARKER_* macro as the first character */
+ unsigned int level = fmt[0];
+
+ if (!elog->is_active || level > elog->level)
+ return;
+
+ prefix_str = plat_log_get_prefix(level);
+
+ while (*prefix_str != '\0') {
+ elog_putchar(elog, *prefix_str);
+ prefix_str++;
+ }
+
+ va_start(args, fmt);
+ fmt++;
+ while (*fmt) {
+ bit64 = 0;
+
+ if (*fmt == '%') {
+ fmt++;
+ /* Check the format specifier */
+loop:
+ switch (*fmt) {
+ case 'i': /* Fall through to next one */
+ case 'd':
+ if (bit64)
+ num = va_arg(args, int64_t);
+ else
+ num = va_arg(args, int32_t);
+
+ if (num < 0) {
+ elog_putchar(elog, '-');
+ unum = (unsigned long)-num;
+ } else
+ unum = (unsigned long)num;
+
+ elog_unsigned_num(elog, unum, 10);
+ break;
+ case 's':
+ str = va_arg(args, char *);
+ elog_string(elog, str);
+ break;
+ case 'x':
+ if (bit64)
+ unum = va_arg(args, uint64_t);
+ else
+ unum = va_arg(args, uint32_t);
+
+ elog_unsigned_num(elog, unum, 16);
+ break;
+ case 'l':
+ bit64 = 1;
+ fmt++;
+ goto loop;
+ case 'u':
+ if (bit64)
+ unum = va_arg(args, uint64_t);
+ else
+ unum = va_arg(args, uint32_t);
+
+ elog_unsigned_num(elog, unum, 10);
+ break;
+ default:
+ /* Exit on any other format specifier */
+ goto exit;
+ }
+ fmt++;
+ continue;
+ }
+ elog_putchar(elog, *fmt++);
+ }
+exit:
+ va_end(args);
+}
diff --git a/plat/brcm/board/common/bcm_elog_ddr.c b/plat/brcm/board/common/bcm_elog_ddr.c
new file mode 100644
index 0000000..89e7bff
--- /dev/null
+++ b/plat/brcm/board/common/bcm_elog_ddr.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright 2019-2020 Broadcom.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+
+#include <ddr_init.h>
+#include <scp_cmd.h>
+#include <scp_utils.h>
+#include <platform_def.h>
+
+#include "bcm_elog_ddr.h"
+#include "m0_cfg.h"
+#include "m0_ipc.h"
+
+void elog_init_ddr_log(void)
+{
+ struct elog_setup setup = {0};
+ struct elog_global_header global;
+ struct elog_meta_record rec;
+ unsigned int rec_idx = 0;
+ uint32_t log_offset;
+ uintptr_t metadata;
+ char *rec_desc[ELOG_SUPPORTED_REC_CNT] = {"SYSRESET", "THERMAL",
+ "DDR_ECC", "APBOOTLG",
+ "IDM"};
+
+ /*
+ * If this is warm boot, return immediately.
+ * We expect metadata to be initialized already
+ */
+ if (is_warmboot()) {
+ WARN("Warmboot detected, skip ELOG metadata initialization\n");
+ return;
+ }
+
+ memset(&global, 0, sizeof(global));
+
+ global.sector_size = ELOG_SECTOR_SIZE;
+ global.signature = ELOG_GLOBAL_META_HDR_SIG;
+ global.rec_count = ELOG_SUPPORTED_REC_CNT;
+
+ /* Start of logging area in DDR memory */
+ log_offset = ELOG_STORE_OFFSET;
+
+ /* Shift to the first RECORD header */
+ log_offset += 2 * global.sector_size;
+
+ /* Temporary place to hold metadata */
+ metadata = TMP_ELOG_METADATA_BASE;
+
+ memcpy((void *)metadata, &global, sizeof(global));
+ metadata += sizeof(global);
+
+ while (rec_idx < global.rec_count) {
+ memset(&rec, 0, sizeof(rec));
+
+ rec.type = rec_idx;
+ if (rec_idx == ELOG_REC_UART_LOG) {
+ rec.format = ELOG_REC_FMT_ASCII;
+ rec.src_mem_type = ELOG_SRC_MEM_TYPE_DDR;
+ rec.alt_src_mem_type = ELOG_SRC_MEM_TYPE_FS4_SCRATCH;
+ rec.src_mem_addr = BCM_ELOG_BL31_BASE;
+ rec.alt_src_mem_addr = BCM_ELOG_BL2_BASE;
+ rec.rec_size = ELOG_APBOOTLG_REC_SIZE;
+ } else if (rec_idx == ELOG_REC_IDM_LOG) {
+ rec.type = IDM_ELOG_REC_TYPE;
+ rec.format = ELOG_REC_FMT_CUSTOM;
+ rec.src_mem_type = ELOG_SRC_MEM_TYPE_DDR;
+ rec.alt_src_mem_type = ELOG_SRC_MEM_TYPE_CRMU_SCRATCH;
+ rec.src_mem_addr = ELOG_IDM_SRC_MEM_ADDR;
+ rec.alt_src_mem_addr = 0x0;
+ rec.rec_size = ELOG_DEFAULT_REC_SIZE;
+ } else {
+ rec.format = ELOG_REC_FMT_CUSTOM;
+ rec.src_mem_type = ELOG_SRC_MEM_TYPE_CRMU_SCRATCH;
+ rec.alt_src_mem_type = ELOG_SRC_MEM_TYPE_CRMU_SCRATCH;
+ rec.src_mem_addr = ELOG_USE_DEFAULT_MEM_ADDR;
+ rec.alt_src_mem_addr = ELOG_USE_DEFAULT_MEM_ADDR;
+ rec.rec_size = ELOG_DEFAULT_REC_SIZE;
+ }
+
+ rec.nvm_type = LOG_MEDIA_DDR;
+ rec.sector_size = ELOG_SECTOR_SIZE;
+
+ rec.rec_addr = (uint64_t)log_offset;
+ log_offset += rec.rec_size;
+
+ /* Sanity checks */
+ if (rec.type > ELOG_MAX_REC_COUNT ||
+ rec.format > ELOG_MAX_REC_FORMAT ||
+ (rec.nvm_type > ELOG_MAX_NVM_TYPE &&
+ rec.nvm_type != ELOG_NVM_DEFAULT) ||
+ !rec.rec_size ||
+ !rec.sector_size ||
+ rec_idx >= ELOG_SUPPORTED_REC_CNT) {
+ ERROR("Invalid ELOG record(%u) detected\n", rec_idx);
+ return;
+ }
+
+ memset(rec.rec_desc, ' ', sizeof(rec.rec_desc));
+
+ memcpy(rec.rec_desc, rec_desc[rec_idx],
+ strlen(rec_desc[rec_idx]));
+
+ memcpy((void *)metadata, &rec, sizeof(rec));
+ metadata += sizeof(rec);
+
+ rec_idx++;
+ }
+
+ setup.params[0] = TMP_ELOG_METADATA_BASE;
+ setup.params[1] = (sizeof(global) + global.rec_count * sizeof(rec));
+ setup.cmd = ELOG_SETUP_CMD_WRITE_META;
+
+ flush_dcache_range((uintptr_t)&setup, sizeof(struct elog_setup));
+ flush_dcache_range((uintptr_t)setup.params[0], setup.params[1]);
+
+ /* initialize DDR Logging METADATA if this is NOT warmboot */
+ if (!is_warmboot()) {
+ if (scp_send_cmd(MCU_IPC_MCU_CMD_ELOG_SETUP,
+ (uint32_t)(uintptr_t)(&setup),
+ SCP_CMD_DEFAULT_TIMEOUT_US)) {
+ ERROR("scp_send_cmd: timeout/error for elog setup\n");
+ return;
+ }
+ }
+
+ NOTICE("MCU Error logging initialized\n");
+}
diff --git a/plat/brcm/board/common/bcm_elog_ddr.h b/plat/brcm/board/common/bcm_elog_ddr.h
new file mode 100644
index 0000000..6f21a68
--- /dev/null
+++ b/plat/brcm/board/common/bcm_elog_ddr.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2019-2020 Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BCM_ELOG_DDR_H
+#define BCM_ELOG_DDR_H
+
+#define ELOG_GLOBAL_META_HDR_SIG 0x45524c47
+#define ELOG_MAX_REC_COUNT 13
+#define ELOG_MAX_REC_FORMAT 1
+#define ELOG_MAX_NVM_TYPE 4
+/* Use a default NVM, set by m0 configuration */
+#define ELOG_NVM_DEFAULT 0xff
+
+/* Max. number of cmd parameters per elog spec */
+#define ELOG_PARAM_COUNT 3
+/*
+ * Number of supported RECORD Types-
+ * SYSRESET, THERMAL, DDR_ECC, APBOOTLG, IDM
+ */
+#define ELOG_SUPPORTED_REC_CNT 5
+
+#define ELOG_REC_DESC_LENGTH 8
+
+#define ELOG_SECTOR_SIZE 0x1000
+
+/* Default Record size for all record types except APBOOTLOG */
+#define ELOG_DEFAULT_REC_SIZE 0x10000
+
+/* Default record size for APBOOTLOG record */
+#define ELOG_APBOOTLG_REC_SIZE 0x60000
+
+/* Use default CRMU provided mem address */
+#define ELOG_USE_DEFAULT_MEM_ADDR 0x0
+
+/* Temporary place to hold metadata */
+#define TMP_ELOG_METADATA_BASE (ELOG_AP_UART_LOG_BASE + \
+ BCM_ELOG_BL2_SIZE)
+/* IDM ELOG source memory address */
+#define ELOG_IDM_SRC_MEM_ADDR 0x8f213000
+
+#define IDM_ELOG_REC_TYPE 5
+
+enum elog_record_type {
+ ELOG_REC_SYS_RESET_EVT = 0,
+ ELOG_REC_THERMAL_EVT,
+ ELOG_REC_DDR_ECC,
+ ELOG_REC_UART_LOG,
+ ELOG_REC_IDM_LOG,
+ ELOG_REC_MAX
+};
+
+enum elog_record_format {
+ ELOG_REC_FMT_ASCII = 0,
+ ELOG_REC_FMT_CUSTOM
+};
+
+enum elog_src_memory_type {
+ ELOG_SRC_MEM_TYPE_CRMU_SCRATCH = 0,
+ ELOG_SRC_MEM_TYPE_FS4_SCRATCH,
+ ELOG_SRC_MEM_TYPE_DDR,
+ ELOG_SRC_MEM_TYPE_CHIMP_SCRATCH
+};
+
+enum elog_setup_cmd {
+ ELOG_SETUP_CMD_VALIDATE_META,
+ ELOG_SETUP_CMD_WRITE_META,
+ ELOG_SETUP_CMD_ERASE,
+ ELOG_SETUP_CMD_READ,
+ ELOG_SETUP_CMD_CHECK
+};
+
+struct elog_setup {
+ uint32_t cmd;
+ uint32_t params[ELOG_PARAM_COUNT];
+ uint32_t result;
+ uint32_t ret_code;
+};
+
+struct elog_meta_record {
+ uint8_t type;
+ uint8_t format;
+ uint8_t src_mem_type;
+ uint8_t alt_src_mem_type;
+ uint8_t nvm_type;
+ char rec_desc[ELOG_REC_DESC_LENGTH];
+ uint64_t src_mem_addr;
+ uint64_t alt_src_mem_addr;
+ uint64_t rec_addr;
+ uint32_t rec_size;
+ uint32_t sector_size;
+ uint8_t padding[3];
+} __packed;
+
+struct elog_global_header {
+ uint32_t signature;
+ uint32_t sector_size;
+ uint8_t revision;
+ uint8_t rec_count;
+ uint16_t padding;
+} __packed;
+
+void elog_init_ddr_log(void);
+
+#endif /* BCM_ELOG_DDR_H */
diff --git a/plat/brcm/board/common/board_arm_trusted_boot.c b/plat/brcm/board/common/board_arm_trusted_boot.c
new file mode 100644
index 0000000..da18c31
--- /dev/null
+++ b/plat/brcm/board/common/board_arm_trusted_boot.c
@@ -0,0 +1,625 @@
+/*
+ * Copyright 2015 - 2020 Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <plat/common/platform.h>
+#include <tools_share/tbbr_oid.h>
+
+#include <sbl_util.h>
+#include <sotp.h>
+
+/* Weak definition may be overridden in specific platform */
+#pragma weak plat_match_rotpk
+#pragma weak plat_get_nv_ctr
+#pragma weak plat_set_nv_ctr
+
+/* SHA256 algorithm */
+#define SHA256_BYTES 32
+
+/* ROTPK locations */
+#define ARM_ROTPK_REGS_ID 1
+#define ARM_ROTPK_DEVEL_RSA_ID 2
+#define BRCM_ROTPK_SOTP_RSA_ID 3
+
+#if !ARM_ROTPK_LOCATION_ID
+ #error "ARM_ROTPK_LOCATION_ID not defined"
+#endif
+
+static const unsigned char rotpk_hash_hdr[] =
+ "\x30\x31\x30\x0D\x06\x09\x60\x86\x48"
+ "\x01\x65\x03\x04\x02\x01\x05\x00\x04\x20";
+static const unsigned int rotpk_hash_hdr_len = sizeof(rotpk_hash_hdr) - 1;
+static unsigned char rotpk_hash_der[sizeof(rotpk_hash_hdr) - 1 + SHA256_BYTES];
+
+#if (ARM_ROTPK_LOCATION_ID == ARM_ROTPK_DEVEL_RSA_ID)
+static const unsigned char arm_devel_rotpk_hash[] =
+ "\xB0\xF3\x82\x09\x12\x97\xD8\x3A"
+ "\x37\x7A\x72\x47\x1B\xEC\x32\x73"
+ "\xE9\x92\x32\xE2\x49\x59\xF6\x5E"
+ "\x8B\x4A\x4A\x46\xD8\x22\x9A\xDA";
+#endif
+
+#pragma weak plat_rotpk_hash
+const unsigned char plat_rotpk_hash[] =
+ "\xdb\x06\x67\x95\x4f\x88\x2b\x88"
+ "\x49\xbf\x70\x3f\xde\x50\x4a\x96"
+ "\xd8\x17\x69\xd4\xa0\x6c\xba\xee"
+ "\x66\x3e\x71\x82\x2d\x95\x69\xe4";
+
+#pragma weak rom_slice
+const unsigned char rom_slice[] =
+ "\x77\x06\xbc\x98\x40\xbe\xfd\xab"
+ "\x60\x4b\x74\x3c\x9a\xb3\x80\x75"
+ "\x39\xb6\xda\x27\x07\x2e\x5b\xbf"
+ "\x5c\x47\x91\xc9\x95\x26\x26\x0c";
+
+#if (ARM_ROTPK_LOCATION_ID == BRCM_ROTPK_SOTP_RSA_ID)
+static int plat_is_trusted_boot(void)
+{
+ uint64_t section3_row0_data;
+
+ section3_row0_data = sotp_mem_read(SOTP_DEVICE_SECURE_CFG0_ROW, 0);
+
+ if ((section3_row0_data & SOTP_DEVICE_SECURE_CFG0_AB_MASK) == 0) {
+ INFO("NOT AB\n");
+ return 0;
+ }
+
+ INFO("AB\n");
+ return TRUSTED_BOARD_BOOT;
+}
+
+/*
+ * FAST AUTH is enabled if all following conditions are met:
+ * - AB part
+ * - SOTP.DEV != 0
+ * - SOTP.CID != 0
+ * - SOTP.ENC_DEV_TYPE = ENC_AB_DEV
+ * - Manuf_debug strap set high
+ */
+static int plat_fast_auth_enabled(void)
+{
+ uint32_t chip_state;
+ uint64_t section3_row0_data;
+ uint64_t section3_row1_data;
+
+ section3_row0_data =
+ sotp_mem_read(SOTP_DEVICE_SECURE_CFG0_ROW, 0);
+ section3_row1_data =
+ sotp_mem_read(SOTP_DEVICE_SECURE_CFG1_ROW, 0);
+
+ chip_state = mmio_read_32(SOTP_REGS_SOTP_CHIP_STATES);
+
+ if (plat_is_trusted_boot() &&
+ (section3_row0_data & SOTP_DEVICE_SECURE_CFG0_DEV_MASK) &&
+ (section3_row0_data & SOTP_DEVICE_SECURE_CFG0_CID_MASK) &&
+ ((section3_row1_data & SOTP_ENC_DEV_TYPE_MASK) ==
+ SOTP_ENC_DEV_TYPE_AB_DEV) &&
+ (chip_state & SOTP_CHIP_STATES_MANU_DEBUG_MASK))
+ return 1;
+
+ return 0;
+}
+#endif
+
+/*
+ * Return the ROTPK hash in the following ASN.1 structure in DER format:
+ *
+ * AlgorithmIdentifier ::= SEQUENCE {
+ * algorithm OBJECT IDENTIFIER,
+ * parameters ANY DEFINED BY algorithm OPTIONAL
+ * }
+ *
+ * DigestInfo ::= SEQUENCE {
+ * digestAlgorithm AlgorithmIdentifier,
+ * digest OCTET STRING
+ * }
+ */
+int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
+ unsigned int *flags)
+{
+ uint8_t *dst;
+
+ assert(key_ptr != NULL);
+ assert(key_len != NULL);
+ assert(flags != NULL);
+
+ *flags = 0;
+
+ /* Copy the DER header */
+ memcpy(rotpk_hash_der, rotpk_hash_hdr, rotpk_hash_hdr_len);
+ dst = (uint8_t *)&rotpk_hash_der[rotpk_hash_hdr_len];
+
+#if (ARM_ROTPK_LOCATION_ID == ARM_ROTPK_DEVEL_RSA_ID)
+ memcpy(dst, arm_devel_rotpk_hash, SHA256_BYTES);
+#elif (ARM_ROTPK_LOCATION_ID == ARM_ROTPK_REGS_ID)
+ uint32_t *src, tmp;
+ unsigned int words, i;
+
+ /*
+ * Append the hash from Trusted Root-Key Storage registers. The hash has
+ * not been written linearly into the registers, so we have to do a bit
+ * of byte swapping:
+ *
+ * 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C
+ * +---------------------------------------------------------------+
+ * | Reg0 | Reg1 | Reg2 | Reg3 | Reg4 | Reg5 | Reg6 | Reg7 |
+ * +---------------------------------------------------------------+
+ * | ... ... | | ... ... |
+ * | +--------------------+ | +-------+
+ * | | | |
+ * +----------------------------+ +----------------------------+
+ * | | | |
+ * +-------+ | +--------------------+ |
+ * | | | |
+ * v v v v
+ * +---------------------------------------------------------------+
+ * | | |
+ * +---------------------------------------------------------------+
+ * 0 15 16 31
+ *
+ * Additionally, we have to access the registers in 32-bit words
+ */
+ words = SHA256_BYTES >> 3;
+
+ /* Swap bytes 0-15 (first four registers) */
+ src = (uint32_t *)TZ_PUB_KEY_HASH_BASE;
+ for (i = 0 ; i < words ; i++) {
+ tmp = src[words - 1 - i];
+ /* Words are read in little endian */
+ *dst++ = (uint8_t)((tmp >> 24) & 0xFF);
+ *dst++ = (uint8_t)((tmp >> 16) & 0xFF);
+ *dst++ = (uint8_t)((tmp >> 8) & 0xFF);
+ *dst++ = (uint8_t)(tmp & 0xFF);
+ }
+
+ /* Swap bytes 16-31 (last four registers) */
+ src = (uint32_t *)(TZ_PUB_KEY_HASH_BASE + SHA256_BYTES / 2);
+ for (i = 0 ; i < words ; i++) {
+ tmp = src[words - 1 - i];
+ *dst++ = (uint8_t)((tmp >> 24) & 0xFF);
+ *dst++ = (uint8_t)((tmp >> 16) & 0xFF);
+ *dst++ = (uint8_t)((tmp >> 8) & 0xFF);
+ *dst++ = (uint8_t)(tmp & 0xFF);
+ }
+#elif (ARM_ROTPK_LOCATION_ID == BRCM_ROTPK_SOTP_RSA_ID)
+{
+ int i;
+ int ret = -1;
+
+ /*
+ * In non-AB mode, we do not read the key.
+ * In AB mode:
+ * - The Dauth is in BL11 if SBL is enabled
+ * - The Dauth is in SOTP if SBL is disabled.
+ */
+ if (plat_is_trusted_boot() == 0) {
+
+ INFO("NON-AB: Do not read DAUTH!\n");
+ *flags = ROTPK_NOT_DEPLOYED;
+ ret = 0;
+
+ } else if ((sbl_status() == SBL_ENABLED) &&
+ (mmio_read_32(BL11_DAUTH_BASE) == BL11_DAUTH_ID)) {
+
+ /* Read hash from BL11 */
+ INFO("readKeys (DAUTH) from BL11\n");
+
+ memcpy(dst,
+ (void *)(BL11_DAUTH_BASE + sizeof(uint32_t)),
+ SHA256_BYTES);
+
+ for (i = 0; i < SHA256_BYTES; i++)
+ if (dst[i] != 0)
+ break;
+
+ if (i >= SHA256_BYTES)
+ ERROR("Hash not valid from BL11\n");
+ else
+ ret = 0;
+
+ } else if (sotp_key_erased()) {
+
+ memcpy(dst, plat_rotpk_hash, SHA256_BYTES);
+
+ INFO("SOTP erased, Use internal key hash.\n");
+ ret = 0;
+
+ } else if (plat_fast_auth_enabled()) {
+
+ INFO("AB DEV: FAST AUTH!\n");
+ *flags = ROTPK_NOT_DEPLOYED;
+ ret = 0;
+
+ } else if (!(mmio_read_32(SOTP_STATUS_1) & SOTP_DAUTH_ECC_ERROR_MASK)) {
+
+ /* Read hash from SOTP */
+ ret = sotp_read_key(dst,
+ SHA256_BYTES,
+ SOTP_DAUTH_ROW,
+ SOTP_K_HMAC_ROW-1);
+
+ INFO("sotp_read_key (DAUTH): %i\n", ret);
+
+ } else {
+
+ uint64_t row_data;
+ uint32_t k;
+
+ for (k = 0; k < (SOTP_K_HMAC_ROW - SOTP_DAUTH_ROW); k++) {
+ row_data = sotp_mem_read(SOTP_DAUTH_ROW + k,
+ SOTP_ROW_NO_ECC);
+
+ if (row_data != 0)
+ break;
+ }
+
+ if (k == (SOTP_K_HMAC_ROW - SOTP_DAUTH_ROW)) {
+ INFO("SOTP NOT PROGRAMMED: Do not use DAUTH!\n");
+
+ if (sotp_mem_read(SOTP_ATF2_CFG_ROW_ID,
+ SOTP_ROW_NO_ECC) & SOTP_ROMKEY_MASK) {
+ memcpy(dst, plat_rotpk_hash, SHA256_BYTES);
+
+ INFO("Use internal key hash.\n");
+ ret = 0;
+ } else {
+ *flags = ROTPK_NOT_DEPLOYED;
+ ret = 0;
+ }
+ } else {
+ INFO("No hash found in SOTP\n");
+ }
+ }
+ if (ret)
+ return ret;
+}
+#endif
+
+ *key_ptr = (void *)rotpk_hash_der;
+ *key_len = (unsigned int)sizeof(rotpk_hash_der);
+ *flags |= ROTPK_IS_HASH;
+
+ return 0;
+}
+
+#define SOTP_NUM_BITS_PER_ROW 41
+#define SOTP_NVCTR_ROW_ALL_ONES 0x1ffffffffff
+#define SOTP_NVCTR_TRUSTED_IN_USE \
+ ((uint64_t)0x3 << (SOTP_NUM_BITS_PER_ROW-2))
+#define SOTP_NVCTR_NON_TRUSTED_IN_USE ((uint64_t)0x3)
+#define SOTP_NVCTR_TRUSTED_NEAR_END SOTP_NVCTR_NON_TRUSTED_IN_USE
+#define SOTP_NVCTR_NON_TRUSTED_NEAR_END SOTP_NVCTR_TRUSTED_IN_USE
+
+#define SOTP_NVCTR_ROW_START 64
+#define SOTP_NVCTR_ROW_END 75
+
+/*
+ * SOTP NVCTR are stored in section 10 of SOTP (rows 64-75).
+ * Each row of SOTP is 41 bits.
+ * NVCTR's are stored in a bitstream format.
+ * We are tolerant to consecutive bit errors.
+ * Trusted NVCTR starts at the top of row 64 in bitstream format.
+ * Non Trusted NVCTR starts at the bottom of row 75 in reverse bitstream.
+ * Each row can only be used by 1 of the 2 counters. This is determined
+ * by 2 zeros remaining at the beginning or end of the last available row.
+ * If one counter has already starting using a row, the other will be
+ * prevent from writing to that row.
+ *
+ * Example counter values for SOTP programmed below:
+ * Trusted Counter (rows64-69) = 5 * 41 + 40 = 245
+ * NonTrusted Counter (row75-71) = 3 * 41 + 4 = 127
+ * 40 39 38 37 36 ..... 5 4 3 2 1 0
+ * row 64 1 1 1 1 1 1 1 1 1 1 1
+ * row 65 1 1 1 1 1 1 1 1 1 1 1
+ * row 66 1 1 1 1 1 1 1 1 1 1 1
+ * row 67 1 1 1 1 1 1 1 1 1 1 1
+ * row 68 1 1 1 1 1 1 1 1 1 1 1
+ * row 69 1 1 1 1 1 1 1 1 1 1 0
+ * row 71 0 0 0 0 0 0 0 0 0 0 0
+ * row 71 0 0 0 0 0 0 0 0 0 0 0
+ * row 71 0 0 0 0 0 0 0 1 1 1 1
+ * row 73 1 1 1 1 1 1 1 1 1 1 1
+ * row 74 1 1 1 1 1 1 1 1 1 1 1
+ * row 75 1 1 1 1 1 1 1 1 1 1 1
+ *
+ */
+
+#if (DEBUG == 1)
+/*
+ * Dump sotp rows
+ */
+void sotp_dump_rows(uint32_t start_row, uint32_t end_row)
+{
+ int32_t rownum;
+ uint64_t rowdata;
+
+ for (rownum = start_row; rownum <= end_row; rownum++) {
+ rowdata = sotp_mem_read(rownum, SOTP_ROW_NO_ECC);
+ INFO("%d 0x%" PRIx64 "\n", rownum, rowdata);
+ }
+}
+#endif
+
+/*
+ * Get SOTP Trusted nvctr
+ */
+unsigned int sotp_get_trusted_nvctr(void)
+{
+ uint64_t rowdata;
+ uint64_t nextrowdata;
+ uint32_t rownum;
+ unsigned int nvctr;
+
+ rownum = SOTP_NVCTR_ROW_START;
+ nvctr = SOTP_NUM_BITS_PER_ROW;
+
+ /*
+ * Determine what row has last valid data for trusted ctr
+ */
+ rowdata = sotp_mem_read(rownum, SOTP_ROW_NO_ECC);
+ while ((rowdata & SOTP_NVCTR_TRUSTED_IN_USE) &&
+ (rowdata & SOTP_NVCTR_TRUSTED_NEAR_END) &&
+ (rownum < SOTP_NVCTR_ROW_END)) {
+ /*
+ * Current row in use and has data in last 2 bits as well.
+ * Check if next row also has data for this counter
+ */
+ nextrowdata = sotp_mem_read(rownum+1, SOTP_ROW_NO_ECC);
+ if (nextrowdata & SOTP_NVCTR_TRUSTED_IN_USE) {
+ /* Next row also has data so increment rownum */
+ rownum++;
+ nvctr += SOTP_NUM_BITS_PER_ROW;
+ rowdata = nextrowdata;
+ } else {
+ /* Next row does not have data */
+ break;
+ }
+ }
+
+ if (rowdata & SOTP_NVCTR_TRUSTED_IN_USE) {
+ while ((rowdata & 0x1) == 0) {
+ nvctr--;
+ rowdata >>= 1;
+ }
+ } else
+ nvctr -= SOTP_NUM_BITS_PER_ROW;
+
+ INFO("CTR %i\n", nvctr);
+ return nvctr;
+}
+
+/*
+ * Get SOTP NonTrusted nvctr
+ */
+unsigned int sotp_get_nontrusted_nvctr(void)
+{
+ uint64_t rowdata;
+ uint64_t nextrowdata;
+ uint32_t rownum;
+ unsigned int nvctr;
+
+ nvctr = SOTP_NUM_BITS_PER_ROW;
+ rownum = SOTP_NVCTR_ROW_END;
+
+ /*
+ * Determine what row has last valid data for nontrusted ctr
+ */
+ rowdata = sotp_mem_read(rownum, SOTP_ROW_NO_ECC);
+ while ((rowdata & SOTP_NVCTR_NON_TRUSTED_NEAR_END) &&
+ (rowdata & SOTP_NVCTR_NON_TRUSTED_IN_USE) &&
+ (rownum > SOTP_NVCTR_ROW_START)) {
+ /*
+ * Current row in use and has data in last 2 bits as well.
+ * Check if next row also has data for this counter
+ */
+ nextrowdata = sotp_mem_read(rownum-1, SOTP_ROW_NO_ECC);
+ if (nextrowdata & SOTP_NVCTR_NON_TRUSTED_IN_USE) {
+ /* Next row also has data so decrement rownum */
+ rownum--;
+ nvctr += SOTP_NUM_BITS_PER_ROW;
+ rowdata = nextrowdata;
+ } else {
+ /* Next row does not have data */
+ break;
+ }
+ }
+
+ if (rowdata & SOTP_NVCTR_NON_TRUSTED_IN_USE) {
+ while ((rowdata & ((uint64_t)0x1 << (SOTP_NUM_BITS_PER_ROW-1)))
+ ==
+ 0) {
+ nvctr--;
+ rowdata <<= 1;
+ }
+ } else
+ nvctr -= SOTP_NUM_BITS_PER_ROW;
+
+ INFO("NCTR %i\n", nvctr);
+ return nvctr;
+}
+
+/*
+ * Set SOTP Trusted nvctr
+ */
+int sotp_set_trusted_nvctr(unsigned int nvctr)
+{
+ int numrows_available;
+ uint32_t nontrusted_rownum;
+ uint32_t trusted_rownum;
+ uint64_t rowdata;
+ unsigned int maxnvctr;
+
+ /*
+ * Read SOTP to find out how many rows are used by the
+ * NON Trusted nvctr
+ */
+ nontrusted_rownum = SOTP_NVCTR_ROW_END;
+ do {
+ rowdata = sotp_mem_read(nontrusted_rownum, SOTP_ROW_NO_ECC);
+ if (rowdata & SOTP_NVCTR_NON_TRUSTED_IN_USE)
+ nontrusted_rownum--;
+ else
+ break;
+ } while (nontrusted_rownum >= SOTP_NVCTR_ROW_START);
+
+ /*
+ * Calculate maximum value we can have for nvctr based on
+ * number of available rows.
+ */
+ numrows_available = nontrusted_rownum - SOTP_NVCTR_ROW_START + 1;
+ maxnvctr = numrows_available * SOTP_NUM_BITS_PER_ROW;
+ if (maxnvctr) {
+ /*
+ * Last 2 bits of counter can't be written or it will
+ * overflow with nontrusted counter
+ */
+ maxnvctr -= 2;
+ }
+
+ if (nvctr > maxnvctr) {
+ /* Error - not enough room */
+ WARN("tctr not set\n");
+ return 1;
+ }
+
+ /*
+ * It is safe to write the nvctr, fill all 1's up to the
+ * last row and then fill the last row with partial bitstream
+ */
+ trusted_rownum = SOTP_NVCTR_ROW_START;
+ rowdata = SOTP_NVCTR_ROW_ALL_ONES;
+
+ while (nvctr >= SOTP_NUM_BITS_PER_ROW) {
+ sotp_mem_write(trusted_rownum, SOTP_ROW_NO_ECC, rowdata);
+ nvctr -= SOTP_NUM_BITS_PER_ROW;
+ trusted_rownum++;
+ }
+ rowdata <<= (SOTP_NUM_BITS_PER_ROW - nvctr);
+ sotp_mem_write(trusted_rownum, SOTP_ROW_NO_ECC, rowdata);
+ return 0;
+}
+
+/*
+ * Set SOTP NonTrusted nvctr
+ */
+int sotp_set_nontrusted_nvctr(unsigned int nvctr)
+{
+ int numrows_available;
+ uint32_t nontrusted_rownum;
+ uint32_t trusted_rownum;
+ uint64_t rowdata;
+ unsigned int maxnvctr;
+
+ /*
+ * Read SOTP to find out how many rows are used by the
+ * Trusted nvctr
+ */
+ trusted_rownum = SOTP_NVCTR_ROW_START;
+ do {
+ rowdata = sotp_mem_read(trusted_rownum, SOTP_ROW_NO_ECC);
+ if (rowdata & SOTP_NVCTR_TRUSTED_IN_USE)
+ trusted_rownum++;
+ else
+ break;
+ } while (trusted_rownum <= SOTP_NVCTR_ROW_END);
+
+ /*
+ * Calculate maximum value we can have for nvctr based on
+ * number of available rows.
+ */
+ numrows_available = SOTP_NVCTR_ROW_END - trusted_rownum + 1;
+ maxnvctr = numrows_available * SOTP_NUM_BITS_PER_ROW;
+ if (maxnvctr) {
+ /*
+ * Last 2 bits of counter can't be written or it will
+ * overflow with nontrusted counter
+ */
+ maxnvctr -= 2;
+ }
+
+ if (nvctr > maxnvctr) {
+ /* Error - not enough room */
+ WARN("nctr not set\n");
+ return 1;
+ }
+
+ /*
+ * It is safe to write the nvctr, fill all 1's up to the
+ * last row and then fill the last row with partial bitstream
+ */
+ nontrusted_rownum = SOTP_NVCTR_ROW_END;
+ rowdata = SOTP_NVCTR_ROW_ALL_ONES;
+
+ while (nvctr >= SOTP_NUM_BITS_PER_ROW) {
+ sotp_mem_write(nontrusted_rownum, SOTP_ROW_NO_ECC, rowdata);
+ nvctr -= SOTP_NUM_BITS_PER_ROW;
+ nontrusted_rownum--;
+ }
+ rowdata >>= (SOTP_NUM_BITS_PER_ROW - nvctr);
+ sotp_mem_write(nontrusted_rownum, SOTP_ROW_NO_ECC, rowdata);
+ return 0;
+}
+
+/*
+ * Return the non-volatile counter value stored in the platform. The cookie
+ * will contain the OID of the counter in the certificate.
+ *
+ * Return: 0 = success, Otherwise = error
+ */
+int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr)
+{
+ const char *oid;
+
+ assert(cookie != NULL);
+ assert(nv_ctr != NULL);
+
+ *nv_ctr = 0;
+ if ((sotp_mem_read(SOTP_ATF_CFG_ROW_ID, SOTP_ROW_NO_ECC) &
+ SOTP_ATF_NVCOUNTER_ENABLE_MASK)) {
+ oid = (const char *)cookie;
+ if (strcmp(oid, TRUSTED_FW_NVCOUNTER_OID) == 0)
+ *nv_ctr = sotp_get_trusted_nvctr();
+ else if (strcmp(oid, NON_TRUSTED_FW_NVCOUNTER_OID) == 0)
+ *nv_ctr = sotp_get_nontrusted_nvctr();
+ else
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Store a new non-volatile counter value.
+ *
+ * Return: 0 = success, Otherwise = error
+ */
+int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr)
+{
+ const char *oid;
+
+ if (sotp_mem_read(SOTP_ATF_CFG_ROW_ID, SOTP_ROW_NO_ECC) &
+ SOTP_ATF_NVCOUNTER_ENABLE_MASK) {
+ INFO("set CTR %i\n", nv_ctr);
+ oid = (const char *)cookie;
+ if (strcmp(oid, TRUSTED_FW_NVCOUNTER_OID) == 0)
+ return sotp_set_trusted_nvctr(nv_ctr);
+ else if (strcmp(oid, NON_TRUSTED_FW_NVCOUNTER_OID) == 0)
+ return sotp_set_nontrusted_nvctr(nv_ctr);
+ return 1;
+ }
+ return 0;
+}
+
+int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
+{
+ return get_mbedtls_heap_helper(heap_addr, heap_size);
+}
diff --git a/plat/brcm/board/common/board_common.c b/plat/brcm/board/common/board_common.c
new file mode 100644
index 0000000..2f764ab
--- /dev/null
+++ b/plat/brcm/board/common/board_common.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <brcm_def.h>
+#include <plat_brcm.h>
+
+#if IMAGE_BL2
+const mmap_region_t plat_brcm_mmap[] = {
+ HSLS_REGION,
+ BRCM_MAP_SHARED_RAM,
+ BRCM_MAP_NAND_RO,
+ BRCM_MAP_QSPI_RO,
+#ifdef PERIPH0_REGION
+ PERIPH0_REGION,
+#endif
+#ifdef PERIPH1_REGION
+ PERIPH1_REGION,
+#endif
+#ifdef USE_DDR
+ BRCM_MAP_NS_DRAM1,
+#if BRCM_BL31_IN_DRAM
+ BRCM_MAP_BL31_SEC_DRAM,
+#endif
+#else
+#ifdef BRCM_MAP_EXT_SRAM
+ BRCM_MAP_EXT_SRAM,
+#endif
+#endif
+#if defined(USE_CRMU_SRAM) && defined(CRMU_SRAM_BASE)
+ CRMU_SRAM_REGION,
+#endif
+ {0}
+};
+#endif
+
+#if IMAGE_BL31
+const mmap_region_t plat_brcm_mmap[] = {
+ HSLS_REGION,
+#ifdef PERIPH0_REGION
+ PERIPH0_REGION,
+#endif
+#ifdef PERIPH1_REGION
+ PERIPH1_REGION,
+#endif
+#ifdef PERIPH2_REGION
+ PERIPH2_REGION,
+#endif
+#ifdef USB_REGION
+ USB_REGION,
+#endif
+#ifdef USE_DDR
+ BRCM_MAP_NS_DRAM1,
+#ifdef BRCM_MAP_NS_SHARED_DRAM
+ BRCM_MAP_NS_SHARED_DRAM,
+#endif
+#else
+#ifdef BRCM_MAP_EXT_SRAM
+ BRCM_MAP_EXT_SRAM,
+#endif
+#endif
+#if defined(USE_CRMU_SRAM) && defined(CRMU_SRAM_BASE)
+ CRMU_SRAM_REGION,
+#endif
+ {0}
+};
+#endif
+
+CASSERT((ARRAY_SIZE(plat_brcm_mmap) - 1) <= PLAT_BRCM_MMAP_ENTRIES,
+ assert_plat_brcm_mmap_mismatch);
+CASSERT((PLAT_BRCM_MMAP_ENTRIES + BRCM_BL_REGIONS) <= MAX_MMAP_REGIONS,
+ assert_max_mmap_regions);
diff --git a/plat/brcm/board/common/board_common.mk b/plat/brcm/board/common/board_common.mk
new file mode 100644
index 0000000..24a27ed
--- /dev/null
+++ b/plat/brcm/board/common/board_common.mk
@@ -0,0 +1,294 @@
+#
+# Copyright (c) 2015 - 2021, Broadcom
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+PLAT_BL_COMMON_SOURCES += plat/brcm/board/common/board_common.c
+
+# If no board config makefile, do not include it
+ifneq (${BOARD_CFG},)
+BOARD_CFG_MAKE := $(shell find plat/brcm/board/${PLAT} -name '${BOARD_CFG}.mk')
+$(eval $(call add_define,BOARD_CFG))
+ifneq (${BOARD_CFG_MAKE},)
+$(info Including ${BOARD_CFG_MAKE})
+include ${BOARD_CFG_MAKE}
+else
+$(error Error: File ${BOARD_CFG}.mk not found in plat/brcm/board/${PLAT})
+endif
+endif
+
+# To compile with highest log level (VERBOSE) set value to 50
+LOG_LEVEL := 40
+
+# Use custom generic timer clock
+ifneq (${GENTIMER_ACTUAL_CLOCK},)
+$(info Using GENTIMER_ACTUAL_CLOCK=$(GENTIMER_ACTUAL_CLOCK))
+SYSCNT_FREQ := $(GENTIMER_ACTUAL_CLOCK)
+$(eval $(call add_define,SYSCNT_FREQ))
+endif
+
+ifeq (${DRIVER_EMMC_ENABLE},)
+DRIVER_EMMC_ENABLE :=1
+endif
+
+ifeq (${DRIVER_SPI_ENABLE},)
+DRIVER_SPI_ENABLE := 0
+endif
+
+ifeq (${DRIVER_I2C_ENABLE},)
+DRIVER_I2C_ENABLE := 0
+endif
+
+# By default, Trusted Watchdog is always enabled unless SPIN_ON_BL1_EXIT is set
+ifeq (${BRCM_DISABLE_TRUSTED_WDOG},)
+BRCM_DISABLE_TRUSTED_WDOG := 0
+endif
+ifeq (${SPIN_ON_BL1_EXIT}, 1)
+BRCM_DISABLE_TRUSTED_WDOG := 1
+endif
+
+$(eval $(call assert_boolean,BRCM_DISABLE_TRUSTED_WDOG))
+$(eval $(call add_define,BRCM_DISABLE_TRUSTED_WDOG))
+
+# Process ARM_BL31_IN_DRAM flag
+ifeq (${ARM_BL31_IN_DRAM},)
+ARM_BL31_IN_DRAM := 0
+endif
+$(eval $(call assert_boolean,ARM_BL31_IN_DRAM))
+$(eval $(call add_define,ARM_BL31_IN_DRAM))
+
+ifeq (${STANDALONE_BL2},yes)
+BL2_LOG_LEVEL := 40
+$(eval $(call add_define,MMU_DISABLED))
+endif
+
+# BL2 XIP from QSPI
+RUN_BL2_FROM_QSPI := 0
+ifeq (${RUN_BL2_FROM_QSPI},1)
+$(eval $(call add_define,RUN_BL2_FROM_QSPI))
+endif
+
+# BL2 XIP from NAND
+RUN_BL2_FROM_NAND := 0
+ifeq (${RUN_BL2_FROM_NAND},1)
+$(eval $(call add_define,RUN_BL2_FROM_NAND))
+endif
+
+ifneq (${ELOG_AP_UART_LOG_BASE},)
+$(eval $(call add_define,ELOG_AP_UART_LOG_BASE))
+endif
+
+ifeq (${ELOG_SUPPORT},1)
+ifeq (${ELOG_STORE_MEDIA},DDR)
+$(eval $(call add_define,ELOG_STORE_MEDIA_DDR))
+ifneq (${ELOG_STORE_OFFSET},)
+$(eval $(call add_define,ELOG_STORE_OFFSET))
+endif
+endif
+endif
+
+ifneq (${BL2_LOG_LEVEL},)
+$(eval $(call add_define,BL2_LOG_LEVEL))
+endif
+
+ifneq (${BL31_LOG_LEVEL},)
+$(eval $(call add_define,BL31_LOG_LEVEL))
+endif
+
+# Use CRMU SRAM from iHOST
+ifneq (${USE_CRMU_SRAM},)
+$(eval $(call add_define,USE_CRMU_SRAM))
+endif
+
+# Use PIO mode if DDR is not used
+ifeq (${USE_DDR},yes)
+EMMC_USE_DMA := 1
+else
+EMMC_USE_DMA := 0
+endif
+$(eval $(call add_define,EMMC_USE_DMA))
+
+# On BRCM platforms, separate the code and read-only data sections to allow
+# mapping the former as executable and the latter as execute-never.
+SEPARATE_CODE_AND_RODATA := 1
+
+# Use generic OID definition (tbbr_oid.h)
+USE_TBBR_DEFS := 1
+
+PLAT_INCLUDES += -Iplat/brcm/board/common \
+ -Iinclude/drivers/brcm \
+ -Iinclude/drivers/brcm/emmc \
+ -Iinclude/drivers/brcm/mdio
+
+PLAT_BL_COMMON_SOURCES += plat/brcm/common/brcm_common.c \
+ plat/brcm/board/common/cmn_sec.c \
+ plat/brcm/board/common/bcm_console.c \
+ plat/brcm/board/common/brcm_mbedtls.c \
+ plat/brcm/board/common/plat_setup.c \
+ plat/brcm/board/common/platform_common.c \
+ drivers/arm/sp804/sp804_delay_timer.c \
+ drivers/brcm/sotp.c \
+ drivers/delay_timer/delay_timer.c \
+ drivers/io/io_fip.c \
+ drivers/io/io_memmap.c \
+ drivers/io/io_storage.c \
+ plat/brcm/common/brcm_io_storage.c \
+ plat/brcm/board/common/err.c \
+ plat/brcm/board/common/sbl_util.c \
+ drivers/arm/sp805/sp805.c
+
+# Add RNG driver
+DRIVER_RNG_ENABLE := 1
+ifeq (${DRIVER_RNG_ENABLE},1)
+PLAT_BL_COMMON_SOURCES += drivers/brcm/rng.c
+endif
+
+# Add eMMC driver
+ifeq (${DRIVER_EMMC_ENABLE},1)
+$(eval $(call add_define,DRIVER_EMMC_ENABLE))
+
+EMMC_SOURCES += drivers/brcm/emmc/emmc_chal_sd.c \
+ drivers/brcm/emmc/emmc_csl_sdcard.c \
+ drivers/brcm/emmc/emmc_csl_sdcmd.c \
+ drivers/brcm/emmc/emmc_pboot_hal_memory_drv.c
+
+PLAT_BL_COMMON_SOURCES += ${EMMC_SOURCES}
+
+ifeq (${DRIVER_EMMC_ENABLE_DATA_WIDTH_8BIT},)
+$(eval $(call add_define,DRIVER_EMMC_ENABLE_DATA_WIDTH_8BIT))
+endif
+endif
+
+BL2_SOURCES += plat/brcm/common/brcm_bl2_mem_params_desc.c \
+ plat/brcm/common/brcm_image_load.c \
+ common/desc_image_load.c
+
+BL2_SOURCES += plat/brcm/common/brcm_bl2_setup.c
+
+BL31_SOURCES += plat/brcm/common/brcm_bl31_setup.c
+
+ifeq (${BCM_ELOG},yes)
+ELOG_SOURCES += plat/brcm/board/common/bcm_elog.c
+BL2_SOURCES += ${ELOG_SOURCES}
+BL31_SOURCES += ${ELOG_SOURCES}
+endif
+
+# Add spi driver
+ifeq (${DRIVER_SPI_ENABLE},1)
+PLAT_BL_COMMON_SOURCES += drivers/brcm/spi/iproc_spi.c \
+ drivers/brcm/spi/iproc_qspi.c
+endif
+
+# Add spi nor/flash driver
+ifeq (${DRIVER_SPI_NOR_ENABLE},1)
+PLAT_BL_COMMON_SOURCES += drivers/brcm/spi_sf.c \
+ drivers/brcm/spi_flash.c
+endif
+
+ifeq (${DRIVER_I2C_ENABLE},1)
+$(eval $(call add_define,DRIVER_I2C_ENABLE))
+BL2_SOURCES += drivers/brcm/i2c/i2c.c
+PLAT_INCLUDES += -Iinclude/drivers/brcm/i2c
+endif
+
+ifeq (${DRIVER_OCOTP_ENABLE},1)
+$(eval $(call add_define,DRIVER_OCOTP_ENABLE))
+BL2_SOURCES += drivers/brcm/ocotp.c
+endif
+
+# Enable FRU table support
+ifeq (${USE_FRU},yes)
+$(eval $(call add_define,USE_FRU))
+BL2_SOURCES += drivers/brcm/fru.c
+endif
+
+# Enable GPIO support
+ifeq (${USE_GPIO},yes)
+$(eval $(call add_define,USE_GPIO))
+BL2_SOURCES += drivers/gpio/gpio.c
+BL2_SOURCES += drivers/brcm/iproc_gpio.c
+ifeq (${GPIO_SUPPORT_FLOAT_DETECTION},yes)
+$(eval $(call add_define,GPIO_SUPPORT_FLOAT_DETECTION))
+endif
+endif
+
+# Include mbedtls if it can be located
+MBEDTLS_DIR ?= mbedtls
+MBEDTLS_CHECK := $(shell find ${MBEDTLS_DIR}/include -name '$(notdir ${MBEDTLS_DIR})')
+
+ifneq (${MBEDTLS_CHECK},)
+$(info Found mbedTLS at ${MBEDTLS_DIR})
+PLAT_INCLUDES += -I${MBEDTLS_DIR}/include/mbedtls
+
+# By default, use RSA keys
+KEY_ALG := rsa_1_5
+
+# Include common TBB sources
+AUTH_SOURCES += drivers/auth/auth_mod.c \
+ drivers/auth/crypto_mod.c \
+ drivers/auth/img_parser_mod.c \
+ drivers/auth/tbbr/tbbr_cot_common.c \
+ drivers/auth/tbbr/tbbr_cot_bl2.c
+
+BL2_SOURCES += ${AUTH_SOURCES}
+
+# Use ATF framework for MBEDTLS
+TRUSTED_BOARD_BOOT := 1
+CRYPTO_LIB_MK := drivers/auth/mbedtls/mbedtls_crypto.mk
+IMG_PARSER_LIB_MK := drivers/auth/mbedtls/mbedtls_x509.mk
+$(info Including ${CRYPTO_LIB_MK})
+include ${CRYPTO_LIB_MK}
+$(info Including ${IMG_PARSER_LIB_MK})
+include ${IMG_PARSER_LIB_MK}
+
+# Use ATF secure boot functions
+# Use Hardcoded hash for devel
+
+ARM_ROTPK_LOCATION=arm_rsa
+ifeq (${ARM_ROTPK_LOCATION}, arm_rsa)
+ARM_ROTPK_LOCATION_ID=ARM_ROTPK_DEVEL_RSA_ID
+ROT_KEY=plat/arm/board/common/rotpk/arm_rotprivk_rsa.pem
+else ifeq (${ARM_ROTPK_LOCATION}, brcm_rsa)
+ARM_ROTPK_LOCATION_ID=BRCM_ROTPK_SOTP_RSA_ID
+ifeq (${ROT_KEY},)
+ROT_KEY=plat/brcm/board/common/rotpk/rsa_dauth2048_key.pem
+endif
+KEY_FIND := $(shell m="${ROT_KEY}"; [ -f "$$m" ] && echo "$$m")
+ifeq (${KEY_FIND},)
+$(error Error: No ${ROT_KEY} located)
+else
+$(info Using ROT_KEY: ${ROT_KEY})
+endif
+else
+$(error "Unsupported ARM_ROTPK_LOCATION value")
+endif
+
+$(eval $(call add_define,ARM_ROTPK_LOCATION_ID))
+PLAT_BL_COMMON_SOURCES+=plat/brcm/board/common/board_arm_trusted_boot.c
+endif
+
+#M0 runtime firmware
+ifdef SCP_BL2
+$(eval $(call add_define,NEED_SCP_BL2))
+SCP_CFG_DIR=$(dir ${SCP_BL2})
+PLAT_INCLUDES += -I${SCP_CFG_DIR}
+endif
+
+ifneq (${NEED_BL33},yes)
+# If there is no BL33, BL31 will jump to this address.
+ifeq (${USE_DDR},yes)
+PRELOADED_BL33_BASE := 0x80000000
+else
+PRELOADED_BL33_BASE := 0x74000000
+endif
+endif
+
+# Use translation tables library v1 by default
+ARM_XLAT_TABLES_LIB_V1 := 1
+ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
+$(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1))
+$(eval $(call add_define,ARM_XLAT_TABLES_LIB_V1))
+PLAT_BL_COMMON_SOURCES += lib/xlat_tables/aarch64/xlat_tables.c \
+ lib/xlat_tables/xlat_tables_common.c
+endif
diff --git a/plat/brcm/board/common/brcm_mbedtls.c b/plat/brcm/board/common/brcm_mbedtls.c
new file mode 100644
index 0000000..af42b86
--- /dev/null
+++ b/plat/brcm/board/common/brcm_mbedtls.c
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2015 - 2020 Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+
+void tls_exit(int code)
+{
+ INFO("%s: 0x%x\n", __func__, code);
+}
diff --git a/plat/brcm/board/common/chip_id.h b/plat/brcm/board/common/chip_id.h
new file mode 100644
index 0000000..842ac1f
--- /dev/null
+++ b/plat/brcm/board/common/chip_id.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CHIP_ID_H
+#define CHIP_ID_H
+
+#include <lib/mmio.h>
+
+#include <platform_def.h>
+
+#define CHIP_REV_MAJOR_MASK 0xF0
+#define CHIP_REV_MAJOR_AX 0x00
+#define CHIP_REV_MAJOR_BX 0x10
+#define CHIP_REV_MAJOR_CX 0x20
+#define CHIP_REV_MAJOR_DX 0x30
+
+/* Get Chip ID (product number) of the chip */
+static inline unsigned int chip_get_product_id(void)
+{
+ return PLAT_CHIP_ID_GET;
+}
+
+/* Get Revision ID (major and minor) number of the chip */
+static inline unsigned int chip_get_rev_id(void)
+{
+ return PLAT_CHIP_REV_GET;
+}
+
+static inline unsigned int chip_get_rev_id_major(void)
+{
+ return (chip_get_rev_id() & CHIP_REV_MAJOR_MASK);
+}
+
+#endif
diff --git a/plat/brcm/board/common/cmn_plat_def.h b/plat/brcm/board/common/cmn_plat_def.h
new file mode 100644
index 0000000..79d9a29
--- /dev/null
+++ b/plat/brcm/board/common/cmn_plat_def.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CMN_PLAT_DEF_H
+#define CMN_PLAT_DEF_H
+
+#include <bcm_elog.h>
+#include <platform_def.h>
+
+#ifndef GET_LOG_LEVEL
+#define GET_LOG_LEVEL() LOG_LEVEL
+#endif
+
+#ifndef SET_LOG_LEVEL
+#define SET_LOG_LEVEL(x) ((void)(x))
+#endif
+
+#define PLAT_LOG_NOTICE(...) \
+ do { \
+ if (GET_LOG_LEVEL() >= LOG_LEVEL_NOTICE) { \
+ bcm_elog(LOG_MARKER_NOTICE __VA_ARGS__); \
+ tf_log(LOG_MARKER_NOTICE __VA_ARGS__); \
+ } \
+ } while (0)
+
+#define PLAT_LOG_ERROR(...) \
+ do { \
+ if (GET_LOG_LEVEL() >= LOG_LEVEL_ERROR) { \
+ bcm_elog(LOG_MARKER_ERROR, __VA_ARGS__); \
+ tf_log(LOG_MARKER_ERROR __VA_ARGS__); \
+ } \
+ } while (0)
+
+#define PLAT_LOG_WARN(...) \
+ do { \
+ if (GET_LOG_LEVEL() >= LOG_LEVEL_WARNING) { \
+ bcm_elog(LOG_MARKER_WARNING, __VA_ARGS__);\
+ tf_log(LOG_MARKER_WARNING __VA_ARGS__); \
+ } \
+ } while (0)
+
+#define PLAT_LOG_INFO(...) \
+ do { \
+ if (GET_LOG_LEVEL() >= LOG_LEVEL_INFO) { \
+ bcm_elog(LOG_MARKER_INFO __VA_ARGS__); \
+ tf_log(LOG_MARKER_INFO __VA_ARGS__); \
+ } \
+ } while (0)
+
+#define PLAT_LOG_VERBOSE(...) \
+ do { \
+ if (GET_LOG_LEVEL() >= LOG_LEVEL_VERBOSE) { \
+ bcm_elog(LOG_MARKER_VERBOSE __VA_ARGS__);\
+ tf_log(LOG_MARKER_VERBOSE __VA_ARGS__); \
+ } \
+ } while (0)
+
+/*
+ * The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+#if USE_COHERENT_MEM
+#define CMN_BL_REGIONS 3
+#else
+#define CMN_BL_REGIONS 2
+#endif
+
+/*
+ * FIP definitions
+ */
+#define PLAT_FIP_ATTEMPT_OFFSET 0x20000
+#define PLAT_FIP_NUM_ATTEMPTS 128
+
+#define PLAT_BRCM_FIP_QSPI_BASE QSPI_BASE_ADDR
+#define PLAT_BRCM_FIP_NAND_BASE NAND_BASE_ADDR
+#define PLAT_BRCM_FIP_MAX_SIZE 0x01000000
+
+#define PLAT_BRCM_FIP_BASE PLAT_BRCM_FIP_QSPI_BASE
+#endif
diff --git a/plat/brcm/board/common/cmn_plat_util.h b/plat/brcm/board/common/cmn_plat_util.h
new file mode 100644
index 0000000..178c843
--- /dev/null
+++ b/plat/brcm/board/common/cmn_plat_util.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CMN_PLAT_UTIL_H
+#define CMN_PLAT_UTIL_H
+
+#include <lib/mmio.h>
+
+/* BOOT source */
+#define BOOT_SOURCE_MASK 7
+#define BOOT_SOURCE_QSPI 0
+#define BOOT_SOURCE_NAND 1
+#define BOOT_SOURCE_SPI_NAND 2
+#define BOOT_SOURCE_UART 3
+#define BOOT_SOURCE_RES4 4
+#define BOOT_SOURCE_EMMC 5
+#define BOOT_SOURCE_ATE 6
+#define BOOT_SOURCE_USB 7
+#define BOOT_SOURCE_MAX 8
+#define BOOT_SOURCE_UNKNOWN (-1)
+
+#define KHMAC_SHA256_KEY_SIZE 32
+
+#define SOFT_PWR_UP_RESET_L0 0
+#define SOFT_SYS_RESET_L1 1
+#define SOFT_RESET_L3 0x3
+
+#define BOOT_SOURCE_SOFT_DATA_OFFSET 8
+#define BOOT_SOURCE_SOFT_ENABLE_OFFSET 14
+#define BOOT_SOURCE_SOFT_ENABLE_MASK BIT(BOOT_SOURCE_SOFT_ENABLE_OFFSET)
+
+typedef struct _key {
+ uint8_t hmac_sha256[KHMAC_SHA256_KEY_SIZE];
+} cmn_key_t;
+
+uint32_t boot_source_get(void);
+void bl1_platform_wait_events(void);
+void plat_soft_reset(uint32_t reset);
+
+#endif
diff --git a/plat/brcm/board/common/cmn_sec.c b/plat/brcm/board/common/cmn_sec.c
new file mode 100644
index 0000000..c80d5dd
--- /dev/null
+++ b/plat/brcm/board/common/cmn_sec.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <cmn_sec.h>
+
+#pragma weak plat_tz_master_default_cfg
+#pragma weak plat_tz_sdio_ns_master_set
+#pragma weak plat_tz_usb_ns_master_set
+
+void plat_tz_master_default_cfg(void)
+{
+ /* This function should be implemented in the platform side. */
+ ERROR("%s: TZ CONFIGURATION NOT SET!!!\n", __func__);
+}
+
+void plat_tz_sdio_ns_master_set(uint32_t ns)
+{
+ /* This function should be implemented in the platform side. */
+ ERROR("%s: TZ CONFIGURATION NOT SET!!!\n", __func__);
+}
+
+void plat_tz_usb_ns_master_set(uint32_t ns)
+{
+ /* This function should be implemented in the platform side. */
+ ERROR("%s: TZ CONFIGURATION NOT SET!!!\n", __func__);
+}
+
+void tz_master_default_cfg(void)
+{
+ plat_tz_master_default_cfg();
+}
+
+void tz_sdio_ns_master_set(uint32_t ns)
+{
+ plat_tz_sdio_ns_master_set(ns);
+}
+
+void tz_usb_ns_master_set(uint32_t ns)
+{
+ plat_tz_usb_ns_master_set(ns);
+}
diff --git a/plat/brcm/board/common/cmn_sec.h b/plat/brcm/board/common/cmn_sec.h
new file mode 100644
index 0000000..f74863d
--- /dev/null
+++ b/plat/brcm/board/common/cmn_sec.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CMN_SEC_H
+#define CMN_SEC_H
+
+#include <stdint.h>
+
+#define SECURE_MASTER 0
+#define NS_MASTER 1
+
+void tz_master_default_cfg(void);
+void tz_usb_ns_master_set(uint32_t ns);
+void tz_sdio_ns_master_set(uint32_t ns);
+
+#endif
diff --git a/plat/brcm/board/common/err.c b/plat/brcm/board/common/err.c
new file mode 100644
index 0000000..1fc73c4
--- /dev/null
+++ b/plat/brcm/board/common/err.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <lib/mmio.h>
+
+#include <platform_def.h>
+
+#define L0_RESET 0x2
+
+/*
+ * Brcm error handler
+ */
+void plat_error_handler(int err)
+{
+ INFO("L0 reset...\n");
+
+ /* Ensure the characters are flushed out */
+ console_flush();
+
+ mmio_write_32(CRMU_SOFT_RESET_CTRL, L0_RESET);
+
+ /*
+ * In case we get here:
+ * Loop until the watchdog resets the system
+ */
+ while (1) {
+ wfi();
+ }
+}
diff --git a/plat/brcm/board/common/plat_setup.c b/plat/brcm/board/common/plat_setup.c
new file mode 100644
index 0000000..95e12ed
--- /dev/null
+++ b/plat/brcm/board/common/plat_setup.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+/*
+ * This function returns the fixed clock frequency at which private
+ * timers run. This value will be programmed into CNTFRQ_EL0.
+ */
+unsigned int plat_get_syscnt_freq2(void)
+{
+ return SYSCNT_FREQ;
+}
+
+static const char * const plat_prefix_str[] = {
+ "E: ", "N: ", "W: ", "I: ", "V: "
+};
+
+const char *plat_log_get_prefix(unsigned int log_level)
+{
+ return plat_prefix_str[log_level - 1U];
+}
diff --git a/plat/brcm/board/common/platform_common.c b/plat/brcm/board/common/platform_common.c
new file mode 100644
index 0000000..f4c9a73
--- /dev/null
+++ b/plat/brcm/board/common/platform_common.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/brcm/sotp.h>
+
+#include <cmn_plat_util.h>
+#include <platform_def.h>
+
+uint32_t boot_source_get(void)
+{
+ uint32_t data;
+
+#ifdef FORCE_BOOTSOURCE
+ data = FORCE_BOOTSOURCE;
+#else
+ /* Read primary boot strap from CRMU persistent registers */
+ data = mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG1);
+ if (data & BOOT_SOURCE_SOFT_ENABLE_MASK) {
+ data >>= BOOT_SOURCE_SOFT_DATA_OFFSET;
+ } else {
+ uint64_t sotp_atf_row;
+
+ sotp_atf_row =
+ sotp_mem_read(SOTP_ATF_CFG_ROW_ID, SOTP_ROW_NO_ECC);
+
+ if (sotp_atf_row & SOTP_BOOT_SOURCE_ENABLE_MASK) {
+ /* Construct the boot source based on SOTP bits */
+ data = 0;
+ if (sotp_atf_row & SOTP_BOOT_SOURCE_BITS0)
+ data |= 0x1;
+ if (sotp_atf_row & SOTP_BOOT_SOURCE_BITS1)
+ data |= 0x2;
+ if (sotp_atf_row & SOTP_BOOT_SOURCE_BITS2)
+ data |= 0x4;
+ } else {
+
+ /*
+ * This path is for L0 reset with
+ * Primary Boot source disabled in SOTP.
+ * BOOT_SOURCE_FROM_PR_ON_L1 compile flag will allow
+ * to never come back here so that the
+ * external straps will not be read on L1 reset.
+ */
+
+ /* Use the external straps */
+ data = mmio_read_32(ROM_S0_IDM_IO_STATUS);
+
+#ifdef BOOT_SOURCE_FROM_PR_ON_L1
+ /* Enable boot source read from PR#1 */
+ mmio_setbits_32(CRMU_IHOST_SW_PERSISTENT_REG1,
+ BOOT_SOURCE_SOFT_ENABLE_MASK);
+
+ /* set boot source */
+ data &= BOOT_SOURCE_MASK;
+ mmio_clrsetbits_32(CRMU_IHOST_SW_PERSISTENT_REG1,
+ BOOT_SOURCE_MASK << BOOT_SOURCE_SOFT_DATA_OFFSET,
+ data << BOOT_SOURCE_SOFT_DATA_OFFSET);
+#endif
+ }
+ }
+#endif
+ return (data & BOOT_SOURCE_MASK);
+}
+
+void __dead2 plat_soft_reset(uint32_t reset)
+{
+ if (reset == SOFT_RESET_L3) {
+ mmio_setbits_32(CRMU_IHOST_SW_PERSISTENT_REG1, reset);
+ mmio_write_32(CRMU_MAIL_BOX0, 0x0);
+ mmio_write_32(CRMU_MAIL_BOX1, 0xFFFFFFFF);
+ }
+
+ if (reset != SOFT_SYS_RESET_L1)
+ reset = SOFT_PWR_UP_RESET_L0;
+
+ if (reset == SOFT_PWR_UP_RESET_L0)
+ INFO("L0 RESET...\n");
+
+ if (reset == SOFT_SYS_RESET_L1)
+ INFO("L1 RESET...\n");
+
+ console_flush();
+
+ mmio_clrbits_32(CRMU_SOFT_RESET_CTRL, 1 << reset);
+
+ while (1) {
+ ;
+ }
+}
diff --git a/plat/brcm/board/common/sbl_util.c b/plat/brcm/board/common/sbl_util.c
new file mode 100644
index 0000000..06e5b33
--- /dev/null
+++ b/plat/brcm/board/common/sbl_util.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <common/debug.h>
+
+#include <platform_def.h>
+#include <sbl_util.h>
+#include <sotp.h>
+
+#pragma weak plat_sbl_status
+
+int plat_sbl_status(uint64_t sbl_status)
+{
+ return sbl_status ? 1:0;
+}
+
+int sbl_status(void)
+{
+ uint64_t sbl_sotp = 0;
+ int ret = SBL_DISABLED;
+
+ sbl_sotp = sotp_mem_read(SOTP_ATF_CFG_ROW_ID, SOTP_ROW_NO_ECC);
+
+ if (sbl_sotp != SOTP_ECC_ERR_DETECT) {
+
+ sbl_sotp &= SOTP_SBL_MASK;
+
+ if (plat_sbl_status(sbl_sotp))
+ ret = SBL_ENABLED;
+ }
+
+ VERBOSE("SBL status: %d\n", ret);
+
+ return ret;
+}
diff --git a/plat/brcm/board/common/sbl_util.h b/plat/brcm/board/common/sbl_util.h
new file mode 100644
index 0000000..0747389
--- /dev/null
+++ b/plat/brcm/board/common/sbl_util.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SBL_UTIL_H
+#define SBL_UTIL_H
+
+#include <stdint.h>
+
+#include <sotp.h>
+
+#define SBL_DISABLED 0
+#define SBL_ENABLED 1
+
+int sbl_status(void);
+
+#endif /* #ifdef SBL_UTIL_H */
diff --git a/plat/brcm/board/common/timer_sync.c b/plat/brcm/board/common/timer_sync.c
new file mode 100644
index 0000000..7e33a94
--- /dev/null
+++ b/plat/brcm/board/common/timer_sync.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <platform_def.h>
+#include <timer_sync.h>
+
+/*******************************************************************************
+ * Defines related to time sync and satelite timers
+ ******************************************************************************/
+#define TIME_SYNC_WR_ENA ((uint32_t)0xACCE55 << 8)
+#define IHOST_STA_TMR_CTRL 0x1800
+#define IHOST_SAT_TMR_INC_L 0x1814
+#define IHOST_SAT_TMR_INC_H 0x1818
+
+#define SAT_TMR_CYCLE_DELAY 2
+#define SAT_TMR_32BIT_WRAP_VAL (BIT_64(32) - SAT_TMR_CYCLE_DELAY)
+
+void ihost_enable_satellite_timer(unsigned int cluster_id)
+{
+ uintptr_t ihost_base;
+ uint32_t time_lx, time_h;
+ uintptr_t ihost_enable;
+
+ VERBOSE("Program iHost%u satellite timer\n", cluster_id);
+ ihost_base = IHOST0_BASE + cluster_id * IHOST_ADDR_SPACE;
+
+ /* this read starts the satellite timer counting from 0 */
+ ihost_enable = CENTRAL_TIMER_GET_IHOST_ENA_BASE + cluster_id * 4;
+ time_lx = mmio_read_32(ihost_enable);
+
+ /*
+ * Increment the satellite timer by the central timer plus 2
+ * to accommodate for a 1 cycle delay through NOC
+ * plus counter starting from 0.
+ */
+ mmio_write_32(ihost_base + IHOST_SAT_TMR_INC_L,
+ time_lx + SAT_TMR_CYCLE_DELAY);
+
+ /*
+ * Read the latched upper data, if lx will wrap by adding 2 to it
+ * we need to handle the wrap
+ */
+ time_h = mmio_read_32(CENTRAL_TIMER_GET_H);
+ if (time_lx >= SAT_TMR_32BIT_WRAP_VAL)
+ mmio_write_32(ihost_base + IHOST_SAT_TMR_INC_H, time_h + 1);
+ else
+ mmio_write_32(ihost_base + IHOST_SAT_TMR_INC_H, time_h);
+}
+
+void brcm_timer_sync_init(void)
+{
+ unsigned int cluster_id;
+
+ /* Get the Time Sync module out of reset */
+ mmio_setbits_32(CDRU_MISC_RESET_CONTROL,
+ BIT(CDRU_MISC_RESET_CONTROL_TS_RESET_N));
+
+ /* Deassert the Central Timer TIMER_EN signal for all module */
+ mmio_write_32(CENTRAL_TIMER_SAT_TMR_ENA, TIME_SYNC_WR_ENA);
+
+ /* enables/programs iHost0 satellite timer*/
+ cluster_id = MPIDR_AFFLVL1_VAL(read_mpidr());
+ ihost_enable_satellite_timer(cluster_id);
+}
diff --git a/plat/brcm/board/stingray/aarch64/plat_helpers.S b/plat/brcm/board/stingray/aarch64/plat_helpers.S
new file mode 100644
index 0000000..9a2039d
--- /dev/null
+++ b/plat/brcm/board/stingray/aarch64/plat_helpers.S
@@ -0,0 +1,263 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <assert_macros.S>
+#include <cpu_macros.S>
+#include <cortex_a72.h>
+#include <drivers/ti/uart/uart_16550.h>
+
+#include <platform_def.h>
+
+ .globl plat_reset_handler
+ .globl platform_get_entrypoint
+ .globl plat_secondary_cold_boot_setup
+ .globl platform_mem_init
+ .globl platform_check_mpidr
+ .globl plat_crash_console_init
+ .globl plat_crash_console_putc
+ .globl plat_crash_console_flush
+ .globl plat_disable_acp
+ .globl plat_is_my_cpu_primary
+ .globl plat_my_core_pos
+ .globl platform_is_primary_cpu
+ .globl plat_brcm_calc_core_pos
+ .globl plat_get_my_entrypoint
+
+
+ /* ------------------------------------------------------------
+ * void plat_l2_init(void);
+ *
+ * BL1 and BL2 run with one core, one cluster
+ * This is safe to disable cluster coherency
+ * to make use of the data cache MMU WB attribute
+ * for the SRAM.
+ *
+ * Set L2 Auxiliary Control Register
+ * --------------------------------------------------------------------
+ */
+func plat_l2_init
+ mrs x0, CORTEX_A72_L2ACTLR_EL1
+#if (IMAGE_BL1 || IMAGE_BL2) || defined(USE_SINGLE_CLUSTER)
+ orr x0, x0, #CORTEX_A72_L2ACTLR_DISABLE_ACE_SH_OR_CHI
+#else
+ bic x0, x0, #CORTEX_A72_L2ACTLR_DISABLE_ACE_SH_OR_CHI
+#endif
+ msr CORTEX_A72_L2ACTLR_EL1, x0
+
+ /* Set L2 Control Register */
+ mrs x0, CORTEX_A72_L2CTLR_EL1
+ mov x1, #((CORTEX_A72_L2_DATA_RAM_LATENCY_MASK << \
+ CORTEX_A72_L2CTLR_DATA_RAM_LATENCY_SHIFT) | \
+ (CORTEX_A72_L2_TAG_RAM_LATENCY_MASK << \
+ CORTEX_A72_L2CTLR_TAG_RAM_LATENCY_SHIFT) | \
+ (U(0x1) << CORTEX_A72_L2CTLR_TAG_RAM_SETUP_SHIFT) | \
+ (U(0x1) << CORTEX_A72_L2CTLR_DATA_RAM_SETUP_SHIFT))
+ bic x0, x0, x1
+ mov x1, #((CORTEX_A72_L2_DATA_RAM_LATENCY_3_CYCLES << \
+ CORTEX_A72_L2CTLR_DATA_RAM_LATENCY_SHIFT) | \
+ (U(0x1) << CORTEX_A72_L2CTLR_TAG_RAM_SETUP_SHIFT) | \
+ (U(0x1) << CORTEX_A72_L2CTLR_DATA_RAM_SETUP_SHIFT))
+ orr x0, x0, x1
+ msr CORTEX_A72_L2CTLR_EL1, x0
+
+ isb
+ ret
+endfunc plat_l2_init
+
+ /* --------------------------------------------------------------------
+ * void plat_reset_handler(void);
+ *
+ * Before adding code in this function, refer to the guidelines in
+ * docs/firmware-design.md.
+ *
+ * --------------------------------------------------------------------
+ */
+func plat_reset_handler
+ mov x9, x30
+ bl plat_l2_init
+ mov x30, x9
+ ret
+endfunc plat_reset_handler
+
+ /* -----------------------------------------------------
+ * void platform_get_entrypoint (unsigned int mpid);
+ *
+ * Main job of this routine is to distinguish between
+ * a cold and warm boot.
+ * On a cold boot the secondaries first wait for the
+ * platform to be initialized after which they are
+ * hotplugged in. The primary proceeds to perform the
+ * platform initialization.
+ * -----------------------------------------------------
+ */
+func platform_get_entrypoint
+ /*TBD-STINGRAY*/
+ mov x0, #0
+ ret
+endfunc platform_get_entrypoint
+
+ /* -----------------------------------------------------
+ * void plat_secondary_cold_boot_setup (void);
+ *
+ * This function performs any platform specific actions
+ * needed for a secondary cpu after a cold reset e.g
+ * mark the cpu's presence, mechanism to place it in a
+ * holding pen etc.
+ * -----------------------------------------------------
+ */
+func plat_secondary_cold_boot_setup
+ bl plat_my_core_pos
+ mov_imm x1, SECONDARY_CPU_SPIN_BASE_ADDR
+ add x0, x1, x0, LSL #3
+ mov x1, #0
+ str x1, [x0]
+
+ /* Wait until the entrypoint gets populated */
+poll_mailbox:
+ ldr x1, [x0]
+ cbz x1, 1f
+ br x1
+1:
+ wfe
+ b poll_mailbox
+endfunc plat_secondary_cold_boot_setup
+
+
+ /* -----------------------------------------------------
+ * void platform_mem_init(void);
+ *
+ * We don't need to carry out any memory initialization
+ * on CSS platforms. The Secure RAM is accessible straight away.
+ * -----------------------------------------------------
+ */
+func platform_mem_init
+ /*TBD-STINGRAY*/
+ ret
+endfunc platform_mem_init
+
+ /* -----------------------------------------------------
+ * Placeholder function which should be redefined by
+ * each platform.
+ * -----------------------------------------------------
+ */
+func platform_check_mpidr
+ /*TBD-STINGRAY*/
+ mov x0, xzr
+ ret
+endfunc platform_check_mpidr
+
+ /* ---------------------------------------------
+ * int plat_crash_console_init(void)
+ * Function to initialize the crash console
+ * without a C Runtime to print crash report.
+ * Clobber list : x0, x1, x2
+ * ---------------------------------------------
+ */
+
+func plat_crash_console_init
+ mov_imm x0, BRCM_CRASH_CONSOLE_BASE
+ mov_imm x1, BRCM_CRASH_CONSOLE_REFCLK
+ mov_imm x2, BRCM_CRASH_CONSOLE_BAUDRATE
+ b console_16550_core_init
+ ret
+endfunc plat_crash_console_init
+
+ /* ---------------------------------------------
+ * int plat_crash_console_putc(void)
+ * Function to print a character on the crash
+ * console without a C Runtime.
+ * Clobber list : x1, x2, x3
+ * ---------------------------------------------
+ */
+
+func plat_crash_console_putc
+ mov_imm x1, BRCM_CRASH_CONSOLE_BASE
+ b console_16550_core_putc
+ ret
+endfunc plat_crash_console_putc
+
+ /* ---------------------------------------------
+ * void plat_crash_console_flush(void)
+ * Function to flush crash console
+ * Clobber list : x0, x1
+ * ---------------------------------------------
+ */
+func plat_crash_console_flush
+ mov_imm x0, BRCM_CRASH_CONSOLE_BASE
+ b console_16550_core_flush
+ ret
+endfunc plat_crash_console_flush
+
+ /* -----------------------------------------------------
+ * Placeholder function which should be redefined by
+ * each platform. This function is allowed to use
+ * registers x0 - x17.
+ * -----------------------------------------------------
+ */
+
+func plat_disable_acp
+ /*TBD-STINGRAY*/
+ ret
+endfunc plat_disable_acp
+
+ /* -----------------------------------------------------
+ * unsigned int plat_is_my_cpu_primary (void);
+ *
+ * Find out whether the current cpu is the primary
+ * cpu (applicable only after a cold boot)
+ * -----------------------------------------------------
+ */
+func plat_is_my_cpu_primary
+ mrs x0, mpidr_el1
+ b platform_is_primary_cpu
+endfunc plat_is_my_cpu_primary
+
+ /* -----------------------------------------------------
+ * unsigned int plat_my_core_pos(void)
+ * This function uses the plat_brcm_calc_core_pos()
+ * definition to get the index of the calling CPU.
+ * -----------------------------------------------------
+ */
+func plat_my_core_pos
+ mrs x0, mpidr_el1
+ b plat_brcm_calc_core_pos
+endfunc plat_my_core_pos
+
+ /* -----------------------------------------------------
+ * unsigned int platform_is_primary_cpu (void);
+ *
+ * Find out whether the current cpu is the primary
+ * cpu (applicable only after a cold boot)
+ * -----------------------------------------------------
+ */
+func platform_is_primary_cpu
+ mov x9, x30
+ bl plat_my_core_pos
+ cmp x0, #PRIMARY_CPU
+ cset x0, eq
+ ret x9
+endfunc platform_is_primary_cpu
+
+ /* -----------------------------------------------------
+ * unsigned int plat_brcm_calc_core_pos(uint64_t mpidr)
+ * Helper function to calculate the core position.
+ * With this function: CorePos = (ClusterId * 4) +
+ * CoreId
+ * -----------------------------------------------------
+ */
+func plat_brcm_calc_core_pos
+ and x1, x0, #MPIDR_CPU_MASK
+ and x0, x0, #MPIDR_CLUSTER_MASK
+ add x0, x1, x0, LSR #7
+ ret
+endfunc plat_brcm_calc_core_pos
+
+func plat_get_my_entrypoint
+ mrs x0, mpidr_el1
+ b platform_get_entrypoint
+endfunc plat_get_my_entrypoint
diff --git a/plat/brcm/board/stingray/bcm958742t-ns3.mk b/plat/brcm/board/stingray/bcm958742t-ns3.mk
new file mode 100644
index 0000000..5164eeb
--- /dev/null
+++ b/plat/brcm/board/stingray/bcm958742t-ns3.mk
@@ -0,0 +1,22 @@
+#
+# Copyright (c) 2015 - 2020, Broadcom
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+#######################################################
+# Board config file for bcm958742t-ns3 Stingray SST100-NS3
+#######################################################
+
+include plat/brcm/board/stingray/bcm958742t.mk
+
+# Load BL33 at 0xFF00_0000 address
+ifneq (${BL33_OVERRIDE_LOAD_ADDR},)
+$(eval $(call add_define_val,BL33_OVERRIDE_LOAD_ADDR,0xFF000000))
+endif
+
+# Nitro DDR secure memory
+# Nitro FW and config 0x8AE00000 - 0x8B000000
+# Nitro Crash dump 0x8B000000 - 0x8D000000
+DDR_NITRO_SECURE_REGION_START := 0x8AE00000
+DDR_NITRO_SECURE_REGION_END := 0x8D000000
diff --git a/plat/brcm/board/stingray/bcm958742t.mk b/plat/brcm/board/stingray/bcm958742t.mk
new file mode 100644
index 0000000..5e164b8
--- /dev/null
+++ b/plat/brcm/board/stingray/bcm958742t.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (c) 2015 - 2020, Broadcom
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+#######################################################
+# Board config file for bcm958742t Stingray SST100
+#######################################################
+BOARD_FAMILY := "<bcm958742t.h>"
+$(eval $(call add_define,BOARD_FAMILY))
+
+# Board has internal programmable regulator
+IHOST_REG_TYPE := IHOST_REG_INTEGRATED
+$(eval $(call add_define,IHOST_REG_TYPE))
+
+# Board has internal programmable regulator
+VDDC_REG_TYPE := VDDC_REG_INTEGRATED
+$(eval $(call add_define,VDDC_REG_TYPE))
diff --git a/plat/brcm/board/stingray/driver/ddr/soc/include/board_family.h b/plat/brcm/board/stingray/driver/ddr/soc/include/board_family.h
new file mode 100644
index 0000000..b2427cf
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/ddr/soc/include/board_family.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BOARD_FAMILY_H
+#define BOARD_FAMILY_H
+
+#if defined(DRIVER_SPD_ENABLE) && !defined(DRIVER_SPD_SPOOF)
+#include <spd.h>
+#endif
+
+#ifdef USE_GPIO
+/* max number of supported GPIOs to construct the bitmap for board detection */
+#define MAX_NR_GPIOS 4
+
+/* max GPIO bitmap value */
+#define MAX_GPIO_BITMAP_VAL (BIT(MAX_NR_GPIOS) - 1)
+#endif
+
+struct mcb_ref_group {
+ uint32_t mcb_ref;
+ unsigned int *mcb_cfg;
+};
+
+#define MCB_REF_GROUP(ref) \
+{ \
+ .mcb_ref = 0x ## ref, \
+ .mcb_cfg = mcb_ ## ref, \
+}
+
+#endif
diff --git a/plat/brcm/board/stingray/driver/ext_sram_init/ext_sram_init.c b/plat/brcm/board/stingray/driver/ext_sram_init/ext_sram_init.c
new file mode 100644
index 0000000..74d2077
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/ext_sram_init/ext_sram_init.c
@@ -0,0 +1,302 @@
+/*
+ * Copyright (c) 2016-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <platform_def.h>
+
+static void brcm_stingray_pnor_pinmux_init(void)
+{
+ unsigned int i;
+
+ INFO(" - pnor pinmux init start.\n");
+
+ /* Set PNOR_ADV_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x2dc),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_BAA_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x2e0),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_BLS_0_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x2e4),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_BLS_1_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x2e8),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_CRE_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x2ec),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_CS_2_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x2f0),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_CS_1_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x2f4),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_CS_0_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x2f8),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_WE_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x2fc),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_OE_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x300),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_INTR_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x304),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set PNOR_DAT_x_MODE_SEL_CONTROL.fsel = 0x2 */
+ for (i = 0; i < 0x40; i += 0x4) {
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x308 + i),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+ }
+
+ /* Set NAND_CE1_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x348),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set NAND_CE0_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x34c),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set NAND_WE_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x350),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set NAND_WP_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x354),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set NAND_RE_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x358),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set NAND_RDY_BSY_N_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x35c),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set NAND_IOx_0_MODE_SEL_CONTROL.fsel = 0x2 */
+ for (i = 0; i < 0x40; i += 0x4) {
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x360 + i),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+ }
+
+ /* Set NAND_ALE_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x3a0),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ /* Set NAND_CLE_MODE_SEL_CONTROL.fsel = 0x2 */
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x3a4),
+ MODE_SEL_CONTROL_FSEL_MASK,
+ MODE_SEL_CONTROL_FSEL_MODE2);
+
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x40), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x44), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x48), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x4c), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x50), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x54), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x58), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x5c), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x60), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x64), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x68), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x6c), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x70), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x74), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x78), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x7c), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x80), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x84), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x88), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x8c), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x90), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x94), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x98), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0x9c), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0xa0), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0xa4), (7 << 1), 0x8);
+ mmio_clrsetbits_32((uintptr_t)(HSLS_IOPAD_BASE + 0xa8), (7 << 1), 0x8);
+
+ INFO(" - pnor pinmux init done.\n");
+}
+
+#if BL2_TEST_EXT_SRAM
+#define SRAM_CHECKS_GRANUL 0x100000
+#define SRAM_CHECKS_CNT 8
+static unsigned int sram_checks[SRAM_CHECKS_CNT] = {
+ /* offset, magic */
+ 0xd00dfeed,
+ 0xfadebabe,
+ 0xc001d00d,
+ 0xa5a5b5b5,
+ 0x5a5a5b5b,
+ 0xc5c5d5d5,
+ 0x5c5c5d5d,
+ 0xe5e5f5f5,
+};
+#endif
+
+static void brcm_stingray_pnor_sram_init(void)
+{
+ unsigned int val, tmp;
+#if BL2_TEST_EXT_SRAM
+ unsigned int off, i;
+#endif
+ INFO(" - pnor sram init start.\n");
+
+ /* Enable PNOR Clock */
+ INFO(" -- enable pnor clock\n");
+ mmio_write_32((uintptr_t)(PNOR_IDM_IO_CONTROL_DIRECT), 0x1);
+ udelay(500);
+
+ /* Reset PNOR */
+ INFO(" -- reset pnor\n");
+ mmio_setbits_32((uintptr_t)(PNOR_IDM_IO_RESET_CONTROL), 0x1);
+ udelay(500);
+ mmio_clrbits_32((uintptr_t)(PNOR_IDM_IO_RESET_CONTROL), 0x1);
+ udelay(500);
+
+ /* Configure slave address to chip-select mapping */
+ INFO(" -- configure pnor slave address to chip-select mapping\n");
+ /* 0x74000000-0x75ffffff => CS0 (32MB) */
+ val = (0xfe << PNOR_ICFG_CS_x_MASK0_SHIFT);
+ val |= (0x74);
+ mmio_write_32((uintptr_t)(PNOR_ICFG_CS_0), val);
+ /* 0x76000000-0x77ffffff => CS1 (32MB) */
+ val = (0xfe << PNOR_ICFG_CS_x_MASK0_SHIFT);
+ val |= (0x76);
+ mmio_write_32((uintptr_t)(PNOR_ICFG_CS_1), val);
+ /* 0xffffffff-0xffffffff => CS2 (0MB) */
+ val = (0x00 << PNOR_ICFG_CS_x_MASK0_SHIFT);
+ val |= (0xff);
+ mmio_write_32((uintptr_t)(PNOR_ICFG_CS_2), val);
+
+ /* Print PNOR ID */
+ tmp = 0x0;
+ val = mmio_read_32((uintptr_t)(PNOR_REG_PERIPH_ID0));
+ tmp |= (val & PNOR_REG_PERIPH_IDx_MASK);
+ val = mmio_read_32((uintptr_t)(PNOR_REG_PERIPH_ID1));
+ tmp |= ((val & PNOR_REG_PERIPH_IDx_MASK) << 8);
+ val = mmio_read_32((uintptr_t)(PNOR_REG_PERIPH_ID2));
+ tmp |= ((val & PNOR_REG_PERIPH_IDx_MASK) << 16);
+ val = mmio_read_32((uintptr_t)(PNOR_REG_PERIPH_ID3));
+ tmp |= ((val & PNOR_REG_PERIPH_IDx_MASK) << 24);
+ INFO(" -- pnor primecell_id = 0x%x\n", tmp);
+
+ /* PNOR set_cycles */
+#ifdef EMULATION_SETUP
+ val = 0x00129A44;
+#else
+ val = 0x00125954; /* 0x00002DEF; */
+#endif
+ mmio_write_32((uintptr_t)(PNOR_REG_SET_CYCLES), val);
+ INFO(" -- pnor set_cycles = 0x%x\n", val);
+
+ /* PNOR set_opmode */
+ val = 0x0;
+#ifdef EMULATION_SETUP
+ /* TODO: Final values to be provided by DV folks */
+ val &= ~(0x7 << 7); /* set_wr_bl */
+ val &= ~(0x7 << 3); /* set_rd_bl */
+ val &= ~(0x3);
+ val |= (0x1); /* set_mw */
+#else
+ /* TODO: Final values to be provided by DV folks */
+ val &= ~(0x7 << 7); /* set_wr_bl */
+ val &= ~(0x7 << 3); /* set_rd_bl */
+ val &= ~(0x3);
+ val |= (0x1); /* set_mw */
+#endif
+ mmio_write_32((uintptr_t)(PNOR_REG_SET_OPMODE), val);
+ INFO(" -- pnor set_opmode = 0x%x\n", val);
+
+#ifndef EMULATION_SETUP
+ /* Actual SRAM chip will require self-refresh */
+ val = 0x1;
+ mmio_write_32((uintptr_t)(PNOR_REG_REFRESH_0), val);
+ INFO(" -- pnor refresh_0 = 0x%x\n", val);
+#endif
+
+#if BL2_TEST_EXT_SRAM
+ /* Check PNOR SRAM access */
+ for (off = 0; off < NOR_SIZE; off += SRAM_CHECKS_GRANUL) {
+ i = (off / SRAM_CHECKS_GRANUL) % SRAM_CHECKS_CNT;
+ val = sram_checks[i];
+ INFO(" -- pnor sram write addr=0x%lx value=0x%lx\n",
+ (unsigned long)(NOR_BASE_ADDR + off),
+ (unsigned long)val);
+ mmio_write_32((uintptr_t)(NOR_BASE_ADDR + off), val);
+ }
+ tmp = 0;
+ for (off = 0; off < NOR_SIZE; off += SRAM_CHECKS_GRANUL) {
+ i = (off / SRAM_CHECKS_GRANUL) % SRAM_CHECKS_CNT;
+ val = mmio_read_32((uintptr_t)(NOR_BASE_ADDR + off));
+ INFO(" -- pnor sram read addr=0x%lx value=0x%lx\n",
+ (unsigned long)(NOR_BASE_ADDR + off),
+ (unsigned long)val);
+ if (val == sram_checks[i])
+ tmp++;
+ }
+ INFO(" -- pnor sram checks pass=%d total=%d\n",
+ tmp, (NOR_SIZE / SRAM_CHECKS_GRANUL));
+
+ if (tmp != (NOR_SIZE / SRAM_CHECKS_GRANUL)) {
+ INFO(" - pnor sram init failed.\n");
+ while (1)
+ ;
+ } else {
+ INFO(" - pnor sram init done.\n");
+ }
+#endif
+}
+
+void ext_sram_init(void)
+{
+ INFO("%s start.\n", __func__);
+
+ brcm_stingray_pnor_pinmux_init();
+
+ brcm_stingray_pnor_sram_init();
+
+ INFO("%s done.\n", __func__);
+}
diff --git a/plat/brcm/board/stingray/driver/ext_sram_init/ext_sram_init.h b/plat/brcm/board/stingray/driver/ext_sram_init/ext_sram_init.h
new file mode 100644
index 0000000..8508653
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/ext_sram_init/ext_sram_init.h
@@ -0,0 +1,11 @@
+/*
+ * Copyright (c) 2016-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef EXT_SRAM_INIT_H
+#define EXT_SRAM_INIT_H
+
+void ext_sram_init(void);
+#endif
diff --git a/plat/brcm/board/stingray/driver/ihost_pll_config.c b/plat/brcm/board/stingray/driver/ihost_pll_config.c
new file mode 100644
index 0000000..1184928
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/ihost_pll_config.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright (c) 2016-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <dmu.h>
+
+#define IHOST0_CONFIG_ROOT 0x66000000
+#define IHOST1_CONFIG_ROOT 0x66002000
+#define IHOST2_CONFIG_ROOT 0x66004000
+#define IHOST3_CONFIG_ROOT 0x66006000
+#define A72_CRM_PLL_PWR_ON 0x00000070
+#define A72_CRM_PLL_PWR_ON__PLL0_RESETB_R 4
+#define A72_CRM_PLL_PWR_ON__PLL0_POST_RESETB_R 5
+#define A72_CRM_PLL_CHNL_BYPS_EN 0x000000ac
+#define A72_CRM_PLL_CHNL_BYPS_EN__PLL_0_CHNL_0_BYPS_EN_R 0
+#define A72_CRM_PLL_CHNL_BYPS_EN_DATAMASK 0x0000ec1f
+#define A72_CRM_PLL_CMD 0x00000080
+#define A72_CRM_PLL_CMD__UPDATE_PLL0_FREQUENCY_VCO_R 0
+#define A72_CRM_PLL_CMD__UPDATE_PLL0_FREQUENCY_POST_R 1
+#define A72_CRM_PLL_STATUS 0x00000084
+#define A72_CRM_PLL_STATUS__PLL0_LOCK_R 9
+#define A72_CRM_PLL0_CTRL1 0x00000100
+#define A72_CRM_PLL0_CTRL2 0x00000104
+#define A72_CRM_PLL0_CTRL3 0x00000108
+#define A72_CRM_PLL0_CTRL3__PLL0_PDIV_R 12
+#define A72_CRM_PLL0_CTRL4 0x0000010c
+#define A72_CRM_PLL0_CTRL4__PLL0_KP_R 0
+#define A72_CRM_PLL0_CTRL4__PLL0_KI_R 4
+#define A72_CRM_PLL0_CTRL4__PLL0_KA_R 7
+#define A72_CRM_PLL0_CTRL4__PLL0_FREFEFF_INFO_R 10
+
+#define PLL_MODE_VCO 0x0
+#define PLL_MODE_BYPASS 0x1
+#define PLL_RESET_TYPE_PLL 0x1
+#define PLL_RESET_TYPE_POST 0x2
+#define PLL_VCO 0x1
+#define PLL_POSTDIV 0x2
+#define ARM_FREQ_3G PLL_FREQ_FULL
+#define ARM_FREQ_1P5G PLL_FREQ_HALF
+#define ARM_FREQ_750M PLL_FREQ_QRTR
+
+static unsigned int ARMCOE_crm_getBaseAddress(unsigned int cluster_num)
+{
+ unsigned int ihostx_config_root;
+
+ switch (cluster_num) {
+ case 0:
+ default:
+ ihostx_config_root = IHOST0_CONFIG_ROOT;
+ break;
+ case 1:
+ ihostx_config_root = IHOST1_CONFIG_ROOT;
+ break;
+ case 2:
+ ihostx_config_root = IHOST2_CONFIG_ROOT;
+ break;
+ case 3:
+ ihostx_config_root = IHOST3_CONFIG_ROOT;
+ break;
+ }
+
+ return ihostx_config_root;
+}
+
+static void ARMCOE_crm_pllAssertReset(unsigned int cluster_num,
+ unsigned int reset_type)
+{
+ unsigned long ihostx_config_root;
+ unsigned int pll_rst_ctrl;
+
+ ihostx_config_root = ARMCOE_crm_getBaseAddress(cluster_num);
+ pll_rst_ctrl = mmio_read_32(ihostx_config_root + A72_CRM_PLL_PWR_ON);
+
+ // PLL reset
+ if (reset_type & PLL_RESET_TYPE_PLL) {
+ pll_rst_ctrl &= ~(0x1<<A72_CRM_PLL_PWR_ON__PLL0_RESETB_R);
+ }
+ // post-div channel reset
+ if (reset_type & PLL_RESET_TYPE_POST) {
+ pll_rst_ctrl &= ~(0x1<<A72_CRM_PLL_PWR_ON__PLL0_POST_RESETB_R);
+ }
+
+ mmio_write_32(ihostx_config_root + A72_CRM_PLL_PWR_ON, pll_rst_ctrl);
+}
+
+static void ARMCOE_crm_pllSetMode(unsigned int cluster_num, unsigned int mode)
+{
+ unsigned long ihostx_config_root;
+ unsigned int pll_byp_ctrl;
+
+ ihostx_config_root = ARMCOE_crm_getBaseAddress(cluster_num);
+ pll_byp_ctrl = mmio_read_32(ihostx_config_root +
+ A72_CRM_PLL_CHNL_BYPS_EN);
+
+ if (mode == PLL_MODE_VCO) {
+ // use PLL DCO output
+ pll_byp_ctrl &=
+ ~BIT(A72_CRM_PLL_CHNL_BYPS_EN__PLL_0_CHNL_0_BYPS_EN_R);
+ } else {
+ // use PLL bypass sources
+ pll_byp_ctrl |=
+ BIT(A72_CRM_PLL_CHNL_BYPS_EN__PLL_0_CHNL_0_BYPS_EN_R);
+ }
+
+ mmio_write_32(ihostx_config_root + A72_CRM_PLL_CHNL_BYPS_EN,
+ pll_byp_ctrl);
+}
+
+static void ARMCOE_crm_pllFreqSet(unsigned int cluster_num,
+ unsigned int ihost_pll_freq_sel,
+ unsigned int pdiv)
+{
+ unsigned int ndiv_int;
+ unsigned int ndiv_frac_low, ndiv_frac_high;
+ unsigned long ihostx_config_root;
+
+ ndiv_frac_low = 0x0;
+ ndiv_frac_high = 0x0;
+
+ if (ihost_pll_freq_sel == ARM_FREQ_3G) {
+ ndiv_int = 0x78;
+ } else if (ihost_pll_freq_sel == ARM_FREQ_1P5G) {
+ ndiv_int = 0x3c;
+ } else if (ihost_pll_freq_sel == ARM_FREQ_750M) {
+ ndiv_int = 0x1e;
+ } else {
+ return;
+ }
+
+ ndiv_int &= 0x3FF; // low 10 bits
+ ndiv_frac_low &= 0x3FF;
+ ndiv_frac_high &= 0x3FF;
+
+ ihostx_config_root = ARMCOE_crm_getBaseAddress(cluster_num);
+
+ mmio_write_32(ihostx_config_root+A72_CRM_PLL0_CTRL1, ndiv_frac_low);
+ mmio_write_32(ihostx_config_root+A72_CRM_PLL0_CTRL2, ndiv_frac_high);
+ mmio_write_32(ihostx_config_root+A72_CRM_PLL0_CTRL3,
+ ndiv_int |
+ ((pdiv << A72_CRM_PLL0_CTRL3__PLL0_PDIV_R & 0xF000)));
+
+ mmio_write_32(ihostx_config_root + A72_CRM_PLL0_CTRL4,
+ /* From Section 10 of PLL spec */
+ (3 << A72_CRM_PLL0_CTRL4__PLL0_KP_R) |
+ /* From Section 10 of PLL spec */
+ (2 << A72_CRM_PLL0_CTRL4__PLL0_KI_R) |
+ /* Normal mode (i.e. not fast-locking) */
+ (0 << A72_CRM_PLL0_CTRL4__PLL0_KA_R) |
+ /* 50 MHz */
+ (50 << A72_CRM_PLL0_CTRL4__PLL0_FREFEFF_INFO_R));
+}
+
+static void ARMCOE_crm_pllDeassertReset(unsigned int cluster_num,
+ unsigned int reset_type)
+{
+ unsigned long ihostx_config_root;
+ unsigned int pll_rst_ctrl;
+
+ ihostx_config_root = ARMCOE_crm_getBaseAddress(cluster_num);
+ pll_rst_ctrl = mmio_read_32(ihostx_config_root + A72_CRM_PLL_PWR_ON);
+
+ // PLL reset
+ if (reset_type & PLL_RESET_TYPE_PLL) {
+ pll_rst_ctrl |= (0x1 << A72_CRM_PLL_PWR_ON__PLL0_RESETB_R);
+ }
+
+ // post-div channel reset
+ if (reset_type & PLL_RESET_TYPE_POST) {
+ pll_rst_ctrl |= (0x1 << A72_CRM_PLL_PWR_ON__PLL0_POST_RESETB_R);
+ }
+
+ mmio_write_32(ihostx_config_root + A72_CRM_PLL_PWR_ON, pll_rst_ctrl);
+}
+
+static void ARMCOE_crm_pllUpdate(unsigned int cluster_num, unsigned int type)
+{
+ unsigned long ihostx_config_root;
+ unsigned int pll_cmd;
+
+ ihostx_config_root = ARMCOE_crm_getBaseAddress(cluster_num);
+ pll_cmd = mmio_read_32(ihostx_config_root + A72_CRM_PLL_CMD);
+
+ // VCO update
+ if (type & PLL_VCO) {
+ pll_cmd |= BIT(A72_CRM_PLL_CMD__UPDATE_PLL0_FREQUENCY_VCO_R);
+ }
+ // post-div channel update
+ if (type & PLL_POSTDIV) {
+ pll_cmd |= BIT(A72_CRM_PLL_CMD__UPDATE_PLL0_FREQUENCY_POST_R);
+ }
+
+ mmio_write_32(ihostx_config_root+A72_CRM_PLL_CMD, pll_cmd);
+}
+
+static void insert_delay(unsigned int delay)
+{
+ volatile unsigned int index;
+
+ for (index = 0; index < delay; index++)
+ ;
+}
+
+
+/*
+ * Returns 1 if PLL locked within certain interval
+ */
+static unsigned int ARMCOE_crm_pllIsLocked(unsigned int cluster_num)
+{
+ unsigned long ihostx_config_root;
+ unsigned int lock_status;
+ unsigned int i;
+
+ ihostx_config_root = ARMCOE_crm_getBaseAddress(cluster_num);
+
+ /* wait a while for pll to lock before returning from this function */
+ for (i = 0; i < 1500; i++) {
+ insert_delay(256);
+ lock_status = mmio_read_32(ihostx_config_root +
+ A72_CRM_PLL_STATUS);
+ if (lock_status & BIT(A72_CRM_PLL_STATUS__PLL0_LOCK_R))
+ return 1;
+ }
+
+ ERROR("PLL of Cluster #%u failed to lock\n", cluster_num);
+ return 0;
+}
+
+/*
+ * ihost PLL Variable Frequency Configuration
+ *
+ * Frequency Limit {VCO,ARM} (GHz):
+ * 0 - no limit,
+ * 1 - {3.0,1.5},
+ * 2 - {4.0,2.0},
+ * 3 - {5.0,2.5}
+ */
+uint32_t bcm_set_ihost_pll_freq(uint32_t cluster_num, int ihost_pll_freq_sel)
+{
+ NOTICE("cluster: %u, freq_sel:0x%x\n", cluster_num, ihost_pll_freq_sel);
+
+ //bypass PLL
+ ARMCOE_crm_pllSetMode(cluster_num, PLL_MODE_BYPASS);
+ //assert reset
+ ARMCOE_crm_pllAssertReset(cluster_num,
+ PLL_RESET_TYPE_PLL | PLL_RESET_TYPE_POST);
+ //set ndiv_int for different freq
+ ARMCOE_crm_pllFreqSet(cluster_num, ihost_pll_freq_sel, 0x1);
+ //de-assert reset
+ ARMCOE_crm_pllDeassertReset(cluster_num, PLL_RESET_TYPE_PLL);
+ ARMCOE_crm_pllUpdate(cluster_num, PLL_VCO);
+ //waiting for PLL lock
+ ARMCOE_crm_pllIsLocked(cluster_num);
+ ARMCOE_crm_pllDeassertReset(cluster_num, PLL_RESET_TYPE_POST);
+ //disable bypass PLL
+ ARMCOE_crm_pllSetMode(cluster_num, PLL_MODE_VCO);
+
+ return 0;
+}
+
+uint32_t bcm_get_ihost_pll_freq(uint32_t cluster_num)
+{
+ unsigned long ihostx_config_root;
+ uint32_t ndiv_int;
+ uint32_t ihost_pll_freq_sel;
+
+ ihostx_config_root = ARMCOE_crm_getBaseAddress(cluster_num);
+ ndiv_int = mmio_read_32(ihostx_config_root+A72_CRM_PLL0_CTRL3) & 0x3FF;
+
+ if (ndiv_int == 0x78) {
+ ihost_pll_freq_sel = ARM_FREQ_3G;
+ } else if (ndiv_int == 0x3c) {
+ ihost_pll_freq_sel = ARM_FREQ_1P5G;
+ } else if (ndiv_int == 0x1e) {
+ ihost_pll_freq_sel = ARM_FREQ_750M;
+ } else {
+ /* return unlimit otherwise*/
+ ihost_pll_freq_sel = 0;
+ }
+ return ihost_pll_freq_sel;
+}
diff --git a/plat/brcm/board/stingray/driver/plat_emmc.c b/plat/brcm/board/stingray/driver/plat_emmc.c
new file mode 100644
index 0000000..82085e1
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/plat_emmc.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <lib/mmio.h>
+
+#include <platform_def.h>
+
+#define ICFG_IPROC_IOPAD_CTRL_4 (IPROC_ROOT + 0x9c0)
+#define ICFG_IPROC_IOPAD_CTRL_5 (IPROC_ROOT + 0x9c4)
+#define ICFG_IPROC_IOPAD_CTRL_6 (IPROC_ROOT + 0x9c8)
+#define ICFG_IPROC_IOPAD_CTRL_7 (IPROC_ROOT + 0x9cc)
+
+#define IOPAD_CTRL4_SDIO0_CD_IND_R 30
+#define IOPAD_CTRL4_SDIO0_CD_SRC_R 31
+#define IOPAD_CTRL4_SDIO0_CD_HYS_R 29
+#define IOPAD_CTRL4_SDIO0_CD_PULL_R 28
+#define IOPAD_CTRL4_SDIO0_CD_DRIVE_R 24
+#define IOPAD_CTRL4_SDIO0_CLK_SDCARD_SRC_R 23
+#define IOPAD_CTRL4_SDIO0_CLK_SDCARD_HYS_R 21
+#define IOPAD_CTRL4_SDIO0_CLK_SDCARD_DRIVE_R 17
+
+#define IOPAD_CTRL4_SDIO0_DATA0_SRC_R 15
+#define IOPAD_CTRL4_SDIO0_DATA0_HYS_R 13
+#define IOPAD_CTRL4_SDIO0_DATA0_DRIVE_R 9
+#define IOPAD_CTRL4_SDIO0_DATA1_SRC_R 7
+#define IOPAD_CTRL4_SDIO0_DATA1_HYS_R 5
+#define IOPAD_CTRL4_SDIO0_DATA1_DRIVE_R 1
+
+#define IOPAD_CTRL5_SDIO0_DATA2_SRC_R 31
+#define IOPAD_CTRL5_SDIO0_DATA2_HYS_R 29
+#define IOPAD_CTRL5_SDIO0_DATA2_DRIVE_R 25
+#define IOPAD_CTRL5_SDIO0_DATA3_SRC_R 23
+#define IOPAD_CTRL5_SDIO0_DATA3_IND_R 22
+#define IOPAD_CTRL5_SDIO0_DATA3_HYS_R 21
+#define IOPAD_CTRL5_SDIO0_DATA3_DRIVE_R 17
+#define IOPAD_CTRL5_SDIO0_DATA4_SRC_R 15
+#define IOPAD_CTRL5_SDIO0_DATA4_HYS_R 13
+#define IOPAD_CTRL5_SDIO0_DATA4_DRIVE_R 9
+#define IOPAD_CTRL5_SDIO0_DATA5_SRC_R 7
+#define IOPAD_CTRL5_SDIO0_DATA5_HYS_R 5
+#define IOPAD_CTRL5_SDIO0_DATA5_DRIVE_R 1
+
+#define IOPAD_CTRL6_SDIO0_DATA6_SRC_R 31
+#define IOPAD_CTRL6_SDIO0_DATA6_HYS_R 29
+#define IOPAD_CTRL6_SDIO0_DATA6_DRIVE_R 25
+#define IOPAD_CTRL6_SDIO0_DATA7_SRC_R 23
+#define IOPAD_CTRL6_SDIO0_DATA7_HYS_R 21
+#define IOPAD_CTRL6_SDIO0_DATA7_DRIVE_R 17
+
+void emmc_soft_reset(void)
+{
+ uint32_t val = 0;
+
+ val = (BIT(IOPAD_CTRL6_SDIO0_DATA7_SRC_R) |
+ BIT(IOPAD_CTRL6_SDIO0_DATA7_HYS_R) |
+ BIT(IOPAD_CTRL6_SDIO0_DATA7_DRIVE_R) |
+ BIT(IOPAD_CTRL6_SDIO0_DATA6_SRC_R) |
+ BIT(IOPAD_CTRL6_SDIO0_DATA6_HYS_R) |
+ BIT(IOPAD_CTRL6_SDIO0_DATA6_DRIVE_R));
+
+ mmio_write_32(ICFG_IPROC_IOPAD_CTRL_6, val);
+
+ val = (BIT(IOPAD_CTRL5_SDIO0_DATA3_SRC_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA3_HYS_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA3_DRIVE_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA4_SRC_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA4_HYS_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA4_DRIVE_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA5_SRC_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA5_HYS_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA5_DRIVE_R));
+
+ mmio_write_32(ICFG_IPROC_IOPAD_CTRL_5, val);
+
+ val = (BIT(IOPAD_CTRL4_SDIO0_DATA0_SRC_R) |
+ BIT(IOPAD_CTRL4_SDIO0_DATA0_HYS_R) |
+ BIT(IOPAD_CTRL4_SDIO0_DATA0_DRIVE_R) |
+ BIT(IOPAD_CTRL4_SDIO0_DATA1_SRC_R) |
+ BIT(IOPAD_CTRL4_SDIO0_DATA1_HYS_R) |
+ BIT(IOPAD_CTRL4_SDIO0_DATA1_DRIVE_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA2_SRC_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA2_HYS_R) |
+ BIT(IOPAD_CTRL5_SDIO0_DATA2_DRIVE_R));
+
+ mmio_write_32(ICFG_IPROC_IOPAD_CTRL_6, val);
+
+ val = (BIT(IOPAD_CTRL4_SDIO0_CLK_SDCARD_SRC_R) |
+ BIT(IOPAD_CTRL4_SDIO0_CLK_SDCARD_HYS_R) |
+ BIT(IOPAD_CTRL4_SDIO0_CLK_SDCARD_DRIVE_R) |
+ BIT(IOPAD_CTRL4_SDIO0_CD_SRC_R) |
+ BIT(IOPAD_CTRL4_SDIO0_CD_HYS_R));
+
+ /*
+ * set pull-down, clear pull-up=0
+ * bit 12: pull-down bit 11: pull-up
+ * Note: In emulation, this pull-down setting was not
+ * sufficient. Board design likely requires pull down on
+ * this pin for eMMC.
+ */
+
+ val |= BIT(IOPAD_CTRL4_SDIO0_CD_PULL_R);
+
+ mmio_write_32(ICFG_IPROC_IOPAD_CTRL_4, val);
+}
diff --git a/plat/brcm/board/stingray/driver/sr_usb.h b/plat/brcm/board/stingray/driver/sr_usb.h
new file mode 100644
index 0000000..5033683
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/sr_usb.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (c) 2019 - 2021, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SR_USB_H
+#define SR_USB_H
+
+#define CDRU_PM_RESET_N_R BIT(CDRU_MISC_RESET_CONTROL__CDRU_PM_RESET_N_R)
+#define CDRU_USBSS_RESET_N BIT(CDRU_MISC_RESET_CONTROL__CDRU_USBSS_RESET_N)
+#define CDRU_MISC_CLK_USBSS \
+ BIT(CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_USBSS_CLK_EN_R)
+
+#define RESCAL_I_RSTB BIT(26)
+#define RESCAL_I_PWRDNB BIT(27)
+
+#define DRDU3_U3PHY_CTRL 0x68500014
+#define PHY_RESET BIT(1)
+#define POR_RESET BIT(28)
+#define MDIO_RESET BIT(29)
+
+#define DRDU3_PWR_CTRL 0x6850002c
+#define POWER_CTRL_OVRD BIT(2)
+
+#define USB3H_U3PHY_CTRL 0x68510014
+#define USB3H_U3SOFT_RST_N BIT(30)
+
+#define USB3H_PWR_CTRL 0x68510028
+
+#define USB3_PHY_MDIO_BLOCK_BASE_REG 0x1f
+#define BDC_AXI_SOFT_RST_N_OFFSET 0
+#define XHC_AXI_SOFT_RST_N_OFFSET 1
+#define MDIO_BUS_ID 3
+#define USB3H_PHY_ID 5
+#define USB3DRD_PHY_ID 2
+
+#define USB3_PHY_RXPMD_BLOCK_BASE 0x8020
+#define USB3_PHY_RXPMD_REG1 0x1
+#define USB3_PHY_RXPMD_REG2 0x2
+#define USB3_PHY_RXPMD_REG5 0x5
+#define USB3_PHY_RXPMD_REG7 0x7
+
+#define USB3_PHY_TXPMD_BLOCK_BASE 0x8040
+#define USB3_PHY_TXPMD_REG1 0x1
+#define USB3_PHY_TXPMD_REG2 0x2
+
+#define USB3_PHY_ANA_BLOCK_BASE 0x8090
+#define USB3_PHY_ANA_REG0 0x0
+#define USB3_PHY_ANA_REG1 0x1
+#define USB3_PHY_ANA_REG2 0x2
+#define USB3_PHY_ANA_REG5 0x5
+#define USB3_PHY_ANA_REG8 0x8
+#define USB3_PHY_ANA_REG11 0xb
+
+#define USB3_PHY_AEQ_BLOCK_BASE 0x80e0
+#define USB3_PHY_AEQ_REG1 0x1
+#define USB3_PHY_AEQ_REG3 0x3
+
+#ifdef USB_DMA_COHERENT
+#define DRDU3_U3XHC_SOFT_RST_N BIT(31)
+#define DRDU3_U3BDC_SOFT_RST_N BIT(30)
+
+#define DRDU3_SOFT_RESET_CTRL 0x68500030
+#define DRDU3_XHC_AXI_SOFT_RST_N BIT(1)
+#define DRDU3_BDC_AXI_SOFT_RST_N BIT(0)
+
+#define DRDU2_PHY_CTRL 0x6852000c
+#define DRDU2_U2SOFT_RST_N BIT(29)
+
+#define USB3H_SOFT_RESET_CTRL 0x6851002c
+#define USB3H_XHC_AXI_SOFT_RST_N BIT(1)
+
+#define DRDU2_SOFT_RESET_CTRL 0x68520020
+#define DRDU2_BDC_AXI_SOFT_RST_N BIT(0)
+
+#define DRD2U3H_XHC_REGS_AXIWRA 0x68511c08
+#define DRD2U3H_XHC_REGS_AXIRDA 0x68511c0c
+#define DRDU2D_BDC_REGS_AXIWRA 0x68521c08
+#define DRDU2D_BDC_REGS_AXIRDA 0x68521c0c
+#define DRDU3H_XHC_REGS_AXIWRA 0x68501c08
+#define DRDU3H_XHC_REGS_AXIRDA 0x68501c0c
+#define DRDU3D_BDC_REGS_AXIWRA 0x68502c08
+#define DRDU3D_BDC_REGS_AXIRDA 0x68502c0c
+/* cacheable write-back, allocate on both reads and writes */
+#define USBAXI_AWCACHE 0xf
+#define USBAXI_ARCACHE 0xf
+/* non-secure */
+#define USBAXI_AWPROT 0x8
+#define USBAXI_ARPROT 0x8
+#define USBAXIWR_SA_VAL ((USBAXI_AWCACHE << 4 | USBAXI_AWPROT) << 0)
+#define USBAXIWR_SA_MASK ((0xf << 4 | 0xf) << 0)
+#define USBAXIWR_UA_VAL ((USBAXI_AWCACHE << 4 | USBAXI_AWPROT) << 16)
+#define USBAXIWR_UA_MASK ((0xf << 4 | 0xf) << 0)
+#define USBAXIRD_SA_VAL ((USBAXI_ARCACHE << 4 | USBAXI_ARPROT) << 0)
+#define USBAXIRD_SA_MASK ((0xf << 4 | 0xf) << 0)
+#define USBAXIRD_UA_VAL ((USBAXI_ARCACHE << 4 | USBAXI_ARPROT) << 16)
+#define USBAXIRD_UA_MASK ((0xf << 4 | 0xf) << 0)
+#endif /* USB_DMA_COHERENT */
+
+#define ICFG_DRDU3_SID_CTRL 0x6850001c
+#define ICFG_USB3H_SID_CTRL 0x6851001c
+#define ICFG_DRDU2_SID_CTRL 0x68520010
+#define ICFG_USB_SID_SHIFT 5
+#define ICFG_USB_SID_AWADDR_OFFSET 0x0
+#define ICFG_USB_SID_ARADDR_OFFSET 0x4
+
+#define USBIC_GPV_BASE 0x68600000
+#define USBIC_GPV_SECURITY0 (USBIC_GPV_BASE + 0x8)
+#define USBIC_GPV_SECURITY0_FIELD BIT(0)
+#define USBIC_GPV_SECURITY1 (USBIC_GPV_BASE + 0xc)
+#define USBIC_GPV_SECURITY1_FIELD (BIT(0) | BIT(1))
+#define USBIC_GPV_SECURITY2 (USBIC_GPV_BASE + 0x10)
+#define USBIC_GPV_SECURITY2_FIELD (BIT(0) | BIT(1))
+#define USBIC_GPV_SECURITY4 (USBIC_GPV_BASE + 0x18)
+#define USBIC_GPV_SECURITY4_FIELD BIT(0)
+#define USBIC_GPV_SECURITY10 (USBIC_GPV_BASE + 0x30)
+#define USBIC_GPV_SECURITY10_FIELD (0x7 << 0)
+
+#define USBSS_TZPCDECPROT_BASE 0x68540800
+#define USBSS_TZPCDECPROT0set (USBSS_TZPCDECPROT_BASE + 0x4)
+#define USBSS_TZPCDECPROT0clr (USBSS_TZPCDECPROT_BASE + 0x8)
+#define DECPROT0_USBSS_DRD2U3H BIT(3)
+#define DECPROT0_USBSS_DRDU2H BIT(2)
+#define DECPROT0_USBSS_DRDU3D BIT(1)
+#define DECPROT0_USBSS_DRDU2D BIT(0)
+#define USBSS_TZPCDECPROT0 \
+ (DECPROT0_USBSS_DRD2U3H | \
+ DECPROT0_USBSS_DRDU2H | \
+ DECPROT0_USBSS_DRDU3D | \
+ DECPROT0_USBSS_DRDU2D)
+
+int32_t usb_device_init(unsigned int);
+
+#endif /* SR_USB_H */
diff --git a/plat/brcm/board/stingray/driver/swreg.c b/plat/brcm/board/stingray/driver/swreg.c
new file mode 100644
index 0000000..2b7c53b
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/swreg.c
@@ -0,0 +1,375 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stdint.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <sr_utils.h>
+#include <swreg.h>
+
+#define MIN_VOLT 760000
+#define MAX_VOLT 1060000
+
+#define BSTI_WRITE 0x1
+#define BSTI_READ 0x2
+#define BSTI_COMMAND_TA 0x2
+#define BSTI_COMMAND_DATA 0xFF
+#define BSTI_CONTROL_VAL 0x81
+#define BSTI_CONTROL_BUSY 0x100
+#define BSTI_TOGGLE_BIT 0x2
+#define BSTI_CONFI_DONE_MASK 0xFFFFFFFD
+#define BSTI_REG_DATA_MASK 0xFFFF
+#define BSTI_CMD(sb, op, pa, ra, ta, data) \
+ ((((sb) & 0x3) << 30) | (((op) & 0x3) << 28) | \
+ (((pa) & 0x1F) << 23) | (((ra) & 0x1F) << 18) | \
+ (((ta) & 0x3) << 16) | (data))
+
+#define PHY_REG0 0x0
+#define PHY_REG1 0x1
+#define PHY_REG4 0x4
+#define PHY_REG5 0x5
+#define PHY_REG6 0x6
+#define PHY_REG7 0x7
+#define PHY_REGC 0xc
+
+#define IHOST_VDDC_DATA 0x560
+#define DDR_CORE_DATA 0x2560
+#define UPDATE_POS_EDGE(data, set) ((data) | ((set) << 1))
+
+/*
+ * Formula for SR A2 reworked board:
+ * step = ((vol/(1.4117 * 0.98)) - 500000)/3125
+ * where,
+ * vol - input voltage
+ * 500000 - Reference voltage
+ * 3125 - one step value
+ */
+#define A2_VOL_REF 500000
+#define ONE_STEP_VALUE 3125
+#define VOL_DIV(vol) (((vol*10000ull)/(14117*98ull)) * 100ull)
+#define STEP_VALUE(vol) \
+ ((((((VOL_DIV(vol)) - A2_VOL_REF) / ONE_STEP_VALUE) & 0xFF) << 8) | 4)
+
+#define B0_VOL_REF ((500000/100)*98)
+#define B0_ONE_STEP_VALUE 3125
+/*
+ * Formula for SR B0 chip for IHOST12/03 and VDDC_CORE
+ * step = ((vol/1.56) - (500000 * 0.98))/3125
+ * where,
+ * vol - input voltage
+ * 500000 - Reference voltage
+ * 3125 - one step value
+ */
+#define B0_VOL_DIV(vol) (((vol)*100ull)/156)
+#define B0_STEP_VALUE(vol) \
+ ((((((B0_VOL_DIV(vol)) - B0_VOL_REF) / B0_ONE_STEP_VALUE) \
+ & 0xFF) << 8) | 4)
+
+/*
+ * Formula for SR B0 chip for DDR-CORE
+ * step = ((vol/1) - (500000 * 0.98))/3125
+ * where,
+ * vol - input voltage
+ * 500000 - Reference voltage
+ * 3125 - one step value
+ */
+#define B0_DDR_VDDC_VOL_DIV(vol) ((vol)/1)
+#define B0_DDR_VDDC_STEP_VALUE(vol) \
+ ((((((B0_DDR_VDDC_VOL_DIV(vol)) - B0_VOL_REF) / B0_ONE_STEP_VALUE) \
+ & 0xFF) << 8) | 4)
+
+#define MAX_SWREG_CNT 8
+#define MAX_ADDR_PER_SWREG 16
+#define MAX_REG_ADDR 0xF
+#define MIN_REG_ADDR 0x0
+
+static const char *sw_reg_name[MAX_SWREG_CNT] = {
+ "DDR_VDDC",
+ "IHOST03",
+ "IHOST12",
+ "IHOST_ARRAY",
+ "DDRIO_SLAVE",
+ "VDDC_CORE",
+ "VDDC1",
+ "DDRIO_MASTER"
+};
+
+/* firmware values for all SWREG for 3.3V input operation */
+static const uint16_t swreg_fm_data_bx[MAX_SWREG_CNT][MAX_ADDR_PER_SWREG] = {
+ /* DDR logic: Power Domains independent of 12v or 3p3v */
+ {0x25E0, 0x2D54, 0x0EC6, 0x01EC, 0x28BB, 0x1144, 0x0200, 0x69C0,
+ 0x0010, 0x0EDF, 0x90D7, 0x8000, 0x820C, 0x0003, 0x0001, 0x0000},
+
+ /* ihost03, 3p3V */
+ {0x05E0, 0x39E5, 0x03C1, 0x007C, 0x8BA9, 0x4444, 0x3300, 0x6B80,
+ 0x003F, 0x0FFF, 0x90D7, 0x8000, 0x240C, 0x0003, 0x0001, 0x0000},
+
+ /* ihost12 3p3v */
+ {0x05E0, 0x39E5, 0x03C1, 0x007C, 0x8BA9, 0x4444, 0x3300, 0x6B80,
+ 0x003F, 0x0FFF, 0x90D7, 0x8000, 0x240C, 0x0003, 0x0001, 0x0000},
+
+ /* ihost array */
+ {0x25E0, 0x2D94, 0x0EC6, 0x01EC, 0x2ABB, 0x1144, 0x0340, 0x69C0,
+ 0x0010, 0x0EDF, 0x90D7, 0x8000, 0x860C, 0x0003, 0x0001, 0x0000},
+
+ /* ddr io slave : 3p3v */
+ {0x0560, 0x4438, 0x0000, 0x001F, 0x8028, 0x4444, 0x0300, 0x4380,
+ 0x003F, 0x0FFF, 0x10D7, 0x8000, 0xA70C, 0x0003, 0x0001, 0x0000},
+
+ /* core master 3p3v */
+ {0x05E0, 0x39E5, 0x03C1, 0x007C, 0x8BA9, 0x4444, 0x3300, 0x6B80,
+ 0x003F, 0x0FFF, 0x90D7, 0x8000, 0x240C, 0x0003, 0x0001, 0x0000},
+
+ /* core slave 3p3v */
+ {0x0560, 0x4438, 0x0000, 0x001F, 0x8028, 0x4444, 0x0300, 0x4380,
+ 0x003F, 0x0FFF, 0x10D7, 0x8000, 0x240C, 0x0003, 0x0001, 0x0000},
+
+ /* ddr io master : 3p3v */
+ {0x05E0, 0x39E5, 0x03C1, 0x007C, 0x8BA9, 0x4444, 0x3300, 0x6B80,
+ 0x003F, 0x0FFF, 0x90D7, 0x8000, 0xA70C, 0x0003, 0x0001, 0x0000},
+};
+
+#define FM_DATA swreg_fm_data_bx
+
+static int swreg_poll(void)
+{
+ uint32_t data;
+ int retry = 100;
+
+ do {
+ data = mmio_read_32(BSTI_CONTROL_OFFSET);
+ if ((data & BSTI_CONTROL_BUSY) != BSTI_CONTROL_BUSY)
+ return 0;
+ retry--;
+ udelay(1);
+ } while (retry > 0);
+
+ return -ETIMEDOUT;
+}
+
+static int write_swreg_config(enum sw_reg reg_id, uint32_t addr, uint32_t data)
+{
+ uint32_t cmd;
+ int ret;
+
+ cmd = BSTI_CMD(0x1, BSTI_WRITE, reg_id, addr, BSTI_COMMAND_TA, data);
+ mmio_write_32(BSTI_CONTROL_OFFSET, BSTI_CONTROL_VAL);
+ mmio_write_32(BSTI_COMMAND_OFFSET, cmd);
+ ret = swreg_poll();
+ if (ret) {
+ ERROR("Failed to write swreg %s addr 0x%x\n",
+ sw_reg_name[reg_id-1], addr);
+ return ret;
+ }
+ return ret;
+}
+
+static int read_swreg_config(enum sw_reg reg_id, uint32_t addr, uint32_t *data)
+{
+ uint32_t cmd;
+ int ret;
+
+ cmd = BSTI_CMD(0x1, BSTI_READ, reg_id, addr, BSTI_COMMAND_TA, PHY_REG0);
+ mmio_write_32(BSTI_CONTROL_OFFSET, BSTI_CONTROL_VAL);
+ mmio_write_32(BSTI_COMMAND_OFFSET, cmd);
+ ret = swreg_poll();
+ if (ret) {
+ ERROR("Failed to read swreg %s addr 0x%x\n",
+ sw_reg_name[reg_id-1], addr);
+ return ret;
+ }
+
+ *data = mmio_read_32(BSTI_COMMAND_OFFSET);
+ *data &= BSTI_REG_DATA_MASK;
+ return ret;
+}
+
+static int swreg_config_done(enum sw_reg reg_id)
+{
+ uint32_t read_data;
+ int ret;
+
+ ret = read_swreg_config(reg_id, PHY_REG0, &read_data);
+ if (ret)
+ return ret;
+
+ read_data &= BSTI_CONFI_DONE_MASK;
+ read_data |= BSTI_TOGGLE_BIT;
+ ret = write_swreg_config(reg_id, PHY_REG0, read_data);
+ if (ret)
+ return ret;
+
+ ret = read_swreg_config(reg_id, PHY_REG0, &read_data);
+ if (ret)
+ return ret;
+
+ read_data &= BSTI_CONFI_DONE_MASK;
+ ret = write_swreg_config(reg_id, PHY_REG0, read_data);
+ if (ret)
+ return ret;
+
+ return ret;
+}
+
+#ifdef DUMP_SWREG
+static void dump_swreg_firmware(void)
+{
+ enum sw_reg reg_id;
+ uint32_t data;
+ int addr;
+ int ret;
+
+ for (reg_id = DDR_VDDC; reg_id <= DDRIO_MASTER; reg_id++) {
+ INFO("SWREG: %s\n", sw_reg_name[reg_id - 1]);
+ for (addr = MIN_REG_ADDR; addr <= MAX_REG_ADDR; addr++) {
+ ret = read_swreg_config(reg_id, addr, &data);
+ if (ret)
+ ERROR("Failed to read offset %d\n", addr);
+ INFO("\t0x%x: 0x%04x\n", addr, data);
+ }
+ }
+}
+#endif
+
+int set_swreg(enum sw_reg reg_id, uint32_t micro_volts)
+{
+ uint32_t step, programmed_step;
+ uint32_t data = IHOST_VDDC_DATA;
+ int ret;
+
+ if ((micro_volts > MAX_VOLT) || (micro_volts < MIN_VOLT)) {
+ ERROR("input voltage out-of-range\n");
+ ret = -EINVAL;
+ goto failed;
+ }
+
+ ret = read_swreg_config(reg_id, PHY_REGC, &programmed_step);
+ if (ret)
+ goto failed;
+
+ if (reg_id == DDR_VDDC)
+ step = B0_DDR_VDDC_STEP_VALUE(micro_volts);
+ else
+ step = B0_STEP_VALUE(micro_volts);
+
+ if ((step >> 8) != (programmed_step >> 8)) {
+ ret = write_swreg_config(reg_id, PHY_REGC, step);
+ if (ret)
+ goto failed;
+
+ if (reg_id == DDR_VDDC)
+ data = DDR_CORE_DATA;
+
+ ret = write_swreg_config(reg_id, PHY_REG0,
+ UPDATE_POS_EDGE(data, 1));
+ if (ret)
+ goto failed;
+
+ ret = write_swreg_config(reg_id, PHY_REG0,
+ UPDATE_POS_EDGE(data, 0));
+ if (ret)
+ goto failed;
+ }
+
+ INFO("%s voltage updated to %duV\n", sw_reg_name[reg_id-1],
+ micro_volts);
+ return ret;
+
+failed:
+ /*
+ * Stop booting if voltages are not set
+ * correctly. Booting will fail at random point
+ * if we continue with wrong voltage settings.
+ */
+ ERROR("Failed to set %s voltage to %duV\n", sw_reg_name[reg_id-1],
+ micro_volts);
+ assert(0);
+
+ return ret;
+}
+
+/* Update SWREG firmware for all power doman for A2 chip */
+int swreg_firmware_update(void)
+{
+ enum sw_reg reg_id;
+ uint32_t data;
+ int addr;
+ int ret;
+
+ /* write firmware values */
+ for (reg_id = DDR_VDDC; reg_id <= DDRIO_MASTER; reg_id++) {
+ /* write higher location first */
+ for (addr = MAX_REG_ADDR; addr >= MIN_REG_ADDR; addr--) {
+ ret = write_swreg_config(reg_id, addr,
+ FM_DATA[reg_id - 1][addr]);
+ if (ret)
+ goto exit;
+ }
+ }
+
+ /* trigger SWREG firmware update */
+ for (reg_id = DDR_VDDC; reg_id <= DDRIO_MASTER; reg_id++) {
+ /*
+ * Slave regulator doesn't have to be updated,
+ * Updating Master is enough
+ */
+ if ((reg_id == DDRIO_SLAVE) || (reg_id == VDDC1))
+ continue;
+
+ ret = swreg_config_done(reg_id);
+ if (ret) {
+ ERROR("Failed to trigger SWREG firmware update for %s\n"
+ , sw_reg_name[reg_id-1]);
+ return ret;
+ }
+ }
+
+ for (reg_id = DDR_VDDC; reg_id <= DDRIO_MASTER; reg_id++) {
+ /*
+ * IHOST_ARRAY will be used on some boards like STRATUS and
+ * there will not be any issue even if it is updated on other
+ * boards where it is not used.
+ */
+ if (reg_id == IHOST_ARRAY)
+ continue;
+
+ for (addr = MIN_REG_ADDR; addr <= MAX_REG_ADDR; addr++) {
+ ret = read_swreg_config(reg_id, addr, &data);
+ if (ret || (!ret &&
+ (data != FM_DATA[reg_id - 1][addr]))) {
+ ERROR("swreg fm update failed: %s at off %d\n",
+ sw_reg_name[reg_id - 1], addr);
+ ERROR("Read val: 0x%x, expected val: 0x%x\n",
+ data, FM_DATA[reg_id - 1][addr]);
+ return -1;
+ }
+ }
+ }
+
+ INFO("Updated SWREG firmware\n");
+
+#ifdef DUMP_SWREG
+ dump_swreg_firmware();
+#endif
+ return ret;
+
+exit:
+ /*
+ * Stop booting if swreg firmware update fails.
+ * Booting will fail at random point if we
+ * continue with wrong voltage settings.
+ */
+ ERROR("Failed to update firmware for %s SWREG\n",
+ sw_reg_name[reg_id-1]);
+ assert(0);
+
+ return ret;
+}
diff --git a/plat/brcm/board/stingray/driver/usb.c b/plat/brcm/board/stingray/driver/usb.c
new file mode 100644
index 0000000..4a84141
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/usb.c
@@ -0,0 +1,296 @@
+/*
+ * Copyright (c) 2019 - 2021, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <mdio.h>
+#include <platform_usb.h>
+#include <sr_utils.h>
+#include "sr_usb.h"
+#include <usbh_xhci_regs.h>
+
+static uint32_t usb_func = USB3_DRD | USB3H_USB2DRD;
+
+static void usb_pm_rescal_init(void)
+{
+ uint32_t data;
+ uint32_t try;
+
+ mmio_setbits_32(CDRU_MISC_RESET_CONTROL, CDRU_PM_RESET_N_R);
+ /* release reset */
+ mmio_setbits_32(CDRU_CHIP_TOP_SPARE_REG0, RESCAL_I_RSTB);
+ udelay(10U);
+ /* power up */
+ mmio_setbits_32(CDRU_CHIP_TOP_SPARE_REG0,
+ RESCAL_I_RSTB | RESCAL_I_PWRDNB);
+ try = 1000U;
+ do {
+ udelay(1U);
+ data = mmio_read_32(CDRU_CHIP_TOP_SPARE_REG1);
+ try--;
+ } while ((data & RESCAL_I_PWRDNB) == 0x0U && (try != 0U));
+
+ if (try == 0U) {
+ ERROR("CDRU_CHIP_TOP_SPARE_REG1: 0x%x\n", data);
+ }
+
+ INFO("USB and PM Rescal Init done..\n");
+}
+
+const unsigned int xhc_portsc_reg_offset[MAX_USB_PORTS] = {
+ XHC_PORTSC1_OFFSET,
+ XHC_PORTSC2_OFFSET,
+ XHC_PORTSC3_OFFSET,
+};
+
+static void usb3h_usb2drd_init(void)
+{
+ uint32_t val;
+
+ INFO("USB3H + USB 2DRD init\n");
+ mmio_clrbits_32(USB3H_U3PHY_CTRL, POR_RESET);
+ val = mmio_read_32(USB3H_PWR_CTRL);
+ val &= ~(0x3U << POWER_CTRL_OVRD);
+ val |= (1U << POWER_CTRL_OVRD);
+ mmio_write_32(USB3H_PWR_CTRL, val);
+ mmio_setbits_32(USB3H_U3PHY_CTRL, PHY_RESET);
+ /* Phy to come out of reset */
+ udelay(2U);
+ mmio_clrbits_32(USB3H_U3PHY_CTRL, MDIO_RESET);
+
+ /* MDIO in reset */
+ udelay(2U);
+ mmio_setbits_32(USB3H_U3PHY_CTRL, MDIO_RESET);
+
+ /* After MDIO reset release */
+ udelay(2U);
+
+ /* USB 3.0 phy Analog Block Initialization */
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_MDIO_BLOCK_BASE_REG,
+ USB3_PHY_ANA_BLOCK_BASE);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_ANA_REG0, 0x4646U);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_ANA_REG1, 0x80c9U);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_ANA_REG2, 0x88a6U);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_ANA_REG5, 0x7c12U);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_ANA_REG8, 0x1d07U);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_ANA_REG11, 0x25cU);
+
+ /* USB 3.0 phy RXPMD Block initialization*/
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_MDIO_BLOCK_BASE_REG,
+ USB3_PHY_RXPMD_BLOCK_BASE);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_RXPMD_REG1, 0x4052U);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_RXPMD_REG2, 0x4cU);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_RXPMD_REG5, 0x7U);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_RXPMD_REG7, 0x173U);
+
+ /* USB 3.0 phy AEQ Block initialization*/
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_MDIO_BLOCK_BASE_REG,
+ USB3_PHY_AEQ_BLOCK_BASE);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_AEQ_REG1, 0x3000U);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_AEQ_REG3, 0x2c70U);
+
+ /* USB 3.0 phy TXPMD Block initialization*/
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_MDIO_BLOCK_BASE_REG,
+ USB3_PHY_TXPMD_BLOCK_BASE);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_TXPMD_REG1, 0x100fU);
+ mdio_write(MDIO_BUS_ID, USB3H_PHY_ID, USB3_PHY_TXPMD_REG2, 0x238cU);
+}
+
+static void usb3drd_init(void)
+{
+ uint32_t val;
+
+ INFO("USB3DRD init\n");
+ mmio_clrbits_32(DRDU3_U3PHY_CTRL, POR_RESET);
+ val = mmio_read_32(DRDU3_PWR_CTRL);
+ val &= ~(0x3U << POWER_CTRL_OVRD);
+ val |= (1U << POWER_CTRL_OVRD);
+ mmio_write_32(DRDU3_PWR_CTRL, val);
+ mmio_setbits_32(DRDU3_U3PHY_CTRL, PHY_RESET);
+ /* Phy to come out of reset */
+ udelay(2U);
+ mmio_clrbits_32(DRDU3_U3PHY_CTRL, MDIO_RESET);
+
+ /* MDIO in reset */
+ udelay(2U);
+ mmio_setbits_32(DRDU3_U3PHY_CTRL, MDIO_RESET);
+
+ /* After MDIO reset release */
+ udelay(2U);
+
+ /* USB 3.0 DRD phy Analog Block Initialization */
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_MDIO_BLOCK_BASE_REG,
+ USB3_PHY_ANA_BLOCK_BASE);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_ANA_REG0, 0x4646U);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_ANA_REG1, 0x80c9U);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_ANA_REG2, 0x88a6U);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_ANA_REG5, 0x7c12U);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_ANA_REG8, 0x1d07U);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_ANA_REG11, 0x25cU);
+
+ /* USB 3.0 DRD phy RXPMD Block initialization*/
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_MDIO_BLOCK_BASE_REG,
+ USB3_PHY_RXPMD_BLOCK_BASE);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_RXPMD_REG1, 0x4052U);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_RXPMD_REG2, 0x4cU);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_RXPMD_REG5, 0x7U);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_RXPMD_REG7, 0x173U);
+
+ /* USB 3.0 DRD phy AEQ Block initialization*/
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_MDIO_BLOCK_BASE_REG,
+ USB3_PHY_AEQ_BLOCK_BASE);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_AEQ_REG1, 0x3000U);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_AEQ_REG3, 0x2c70U);
+
+ /* USB 3.0 DRD phy TXPMD Block initialization*/
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_MDIO_BLOCK_BASE_REG,
+ USB3_PHY_TXPMD_BLOCK_BASE);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_TXPMD_REG1, 0x100fU);
+ mdio_write(MDIO_BUS_ID, USB3DRD_PHY_ID, USB3_PHY_TXPMD_REG2, 0x238cU);
+}
+
+static void usb3_phy_init(void)
+{
+ usb_pm_rescal_init();
+
+ if ((usb_func & USB3H_USB2DRD) != 0U) {
+ usb3h_usb2drd_init();
+ }
+
+ if ((usb_func & USB3_DRD) != 0U) {
+ usb3drd_init();
+ }
+}
+
+#ifdef USB_DMA_COHERENT
+void usb_enable_coherence(void)
+{
+ if (usb_func & USB3H_USB2DRD) {
+ mmio_setbits_32(USB3H_SOFT_RESET_CTRL,
+ USB3H_XHC_AXI_SOFT_RST_N);
+ mmio_setbits_32(DRDU2_SOFT_RESET_CTRL,
+ DRDU2_BDC_AXI_SOFT_RST_N);
+ mmio_setbits_32(USB3H_U3PHY_CTRL, USB3H_U3SOFT_RST_N);
+ mmio_setbits_32(DRDU2_PHY_CTRL, DRDU2_U2SOFT_RST_N);
+
+ mmio_clrsetbits_32(DRD2U3H_XHC_REGS_AXIWRA,
+ (USBAXIWR_UA_MASK | USBAXIWR_SA_MASK),
+ (USBAXIWR_UA_VAL | USBAXIWR_SA_VAL));
+
+ mmio_clrsetbits_32(DRD2U3H_XHC_REGS_AXIRDA,
+ (USBAXIRD_UA_MASK | USBAXIRD_SA_MASK),
+ (USBAXIRD_UA_VAL | USBAXIRD_SA_VAL));
+
+ mmio_clrsetbits_32(DRDU2D_BDC_REGS_AXIWRA,
+ (USBAXIWR_UA_MASK | USBAXIWR_SA_MASK),
+ (USBAXIWR_UA_VAL | USBAXIWR_SA_VAL));
+
+ mmio_clrsetbits_32(DRDU2D_BDC_REGS_AXIRDA,
+ (USBAXIRD_UA_MASK | USBAXIRD_SA_MASK),
+ (USBAXIRD_UA_VAL | USBAXIRD_SA_VAL));
+
+ }
+
+ if (usb_func & USB3_DRD) {
+ mmio_setbits_32(DRDU3_SOFT_RESET_CTRL,
+ (DRDU3_XHC_AXI_SOFT_RST_N |
+ DRDU3_BDC_AXI_SOFT_RST_N));
+ mmio_setbits_32(DRDU3_U3PHY_CTRL,
+ (DRDU3_U3XHC_SOFT_RST_N |
+ DRDU3_U3BDC_SOFT_RST_N));
+
+ mmio_clrsetbits_32(DRDU3H_XHC_REGS_AXIWRA,
+ (USBAXIWR_UA_MASK | USBAXIWR_SA_MASK),
+ (USBAXIWR_UA_VAL | USBAXIWR_SA_VAL));
+
+ mmio_clrsetbits_32(DRDU3H_XHC_REGS_AXIRDA,
+ (USBAXIRD_UA_MASK | USBAXIRD_SA_MASK),
+ (USBAXIRD_UA_VAL | USBAXIRD_SA_VAL));
+
+ mmio_clrsetbits_32(DRDU3D_BDC_REGS_AXIWRA,
+ (USBAXIWR_UA_MASK | USBAXIWR_SA_MASK),
+ (USBAXIWR_UA_VAL | USBAXIWR_SA_VAL));
+
+ mmio_clrsetbits_32(DRDU3D_BDC_REGS_AXIRDA,
+ (USBAXIRD_UA_MASK | USBAXIRD_SA_MASK),
+ (USBAXIRD_UA_VAL | USBAXIRD_SA_VAL));
+ }
+}
+#endif
+
+void xhci_phy_init(void)
+{
+ uint32_t val;
+
+ INFO("usb init start\n");
+ mmio_setbits_32(CDRU_MISC_CLK_ENABLE_CONTROL,
+ CDRU_MISC_CLK_USBSS);
+
+ mmio_setbits_32(CDRU_MISC_RESET_CONTROL, CDRU_USBSS_RESET_N);
+
+ if (usb_func & USB3_DRD) {
+ VERBOSE(" - configure stream_id = 0x6800 for DRDU3\n");
+ val = SR_SID_VAL(0x3U, 0x1U, 0x0U) << ICFG_USB_SID_SHIFT;
+ mmio_write_32(ICFG_DRDU3_SID_CTRL + ICFG_USB_SID_AWADDR_OFFSET,
+ val);
+ mmio_write_32(ICFG_DRDU3_SID_CTRL + ICFG_USB_SID_ARADDR_OFFSET,
+ val);
+
+ /*
+ * DRDU3 Device USB Space, DRDU3 Host USB Space,
+ * DRDU3 SS Config
+ */
+ mmio_setbits_32(USBIC_GPV_SECURITY10,
+ USBIC_GPV_SECURITY10_FIELD);
+ }
+
+ if (usb_func & USB3H_USB2DRD) {
+ VERBOSE(" - configure stream_id = 0x6801 for USB3H\n");
+ val = SR_SID_VAL(0x3U, 0x1U, 0x1U) << ICFG_USB_SID_SHIFT;
+ mmio_write_32(ICFG_USB3H_SID_CTRL + ICFG_USB_SID_AWADDR_OFFSET,
+ val);
+ mmio_write_32(ICFG_USB3H_SID_CTRL + ICFG_USB_SID_ARADDR_OFFSET,
+ val);
+
+ VERBOSE(" - configure stream_id = 0x6802 for DRDU2\n");
+ val = SR_SID_VAL(0x3U, 0x1U, 0x2U) << ICFG_USB_SID_SHIFT;
+ mmio_write_32(ICFG_DRDU2_SID_CTRL + ICFG_USB_SID_AWADDR_OFFSET,
+ val);
+ mmio_write_32(ICFG_DRDU2_SID_CTRL + ICFG_USB_SID_ARADDR_OFFSET,
+ val);
+
+ /* DRDU2 APB Bridge:DRDU2 USB Device, USB3H SS Config */
+ mmio_setbits_32(USBIC_GPV_SECURITY1, USBIC_GPV_SECURITY1_FIELD);
+
+ /*
+ * USB3H APB Bridge:DRDU2 Host + USB3 Host USB Space,
+ * USB3H SS Config
+ */
+ mmio_setbits_32(USBIC_GPV_SECURITY2, USBIC_GPV_SECURITY2_FIELD);
+ }
+
+ /* Configure Host masters as non-Secure */
+ mmio_setbits_32(USBSS_TZPCDECPROT0set, USBSS_TZPCDECPROT0);
+
+ /* CCN Slave on USBIC */
+ mmio_setbits_32(USBIC_GPV_SECURITY0, USBIC_GPV_SECURITY0_FIELD);
+
+ /* SLAVE_8:IDM Register Space */
+ mmio_setbits_32(USBIC_GPV_SECURITY4, USBIC_GPV_SECURITY4_FIELD);
+
+ usb3_phy_init();
+#ifdef USB_DMA_COHERENT
+ usb_enable_coherence();
+#endif
+
+ usb_device_init(usb_func);
+
+ INFO("PLAT USB: init done.\n");
+}
diff --git a/plat/brcm/board/stingray/driver/usb_phy.c b/plat/brcm/board/stingray/driver/usb_phy.c
new file mode 100644
index 0000000..54c98e1
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/usb_phy.c
@@ -0,0 +1,601 @@
+/*
+ * Copyright (c) 2019 - 2021, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_usb.h>
+#include <usb_phy.h>
+
+#define USB_PHY_ALREADY_STARTED (-2)
+#define USB_MAX_DEVICES 2
+#define USB3H_USB2DRD_PHY 0
+#define USB3_DRD_PHY 1
+
+/* Common bit fields for all the USB2 phy */
+#define USB2_PHY_ISO DRDU2_U2PHY_ISO
+#define USB2_AFE_PLL_PWRDWNB DRDU2_U2AFE_PLL_PWRDWNB
+#define USB2_AFE_BG_PWRDWNB DRDU2_U2AFE_BG_PWRDWNB
+#define USB2_AFE_LDO_PWRDWNB DRDU2_U2AFE_LDO_PWRDWNB
+#define USB2_CTRL_CORERDY DRDU2_U2CTRL_CORERDY
+
+#define USB2_PHY_PCTL_MASK DRDU2_U2PHY_PCTL_MASK
+#define USB2_PHY_PCTL_OFFSET DRDU2_U2PHY_PCTL_OFFSET
+#define USB2_PHY_PCTL_VAL U2PHY_PCTL_VAL
+
+#define USB2_PLL_RESETB DRDU2_U2PLL_RESETB
+#define USB2_PHY_RESETB DRDU2_U2PHY_RESETB
+
+static usb_phy_port_t usb_phy_port[2U][MAX_NR_PORTS];
+
+static usb_phy_t usb_phy_info[2U] = {
+ {DRDU2_U2PLL_NDIV_FRAC, USB3H_PIPE_CTRL, 0U, USB3H_DRDU2_PHY},
+ {0U, 0U, DRDU3_PIPE_CTRL, DRDU3_PHY}
+};
+
+typedef struct {
+ void *pcd_id;
+} usb_platform_dev;
+
+/* index 0: USB3H + USB2 DRD, 1: USB3 DRD */
+static usb_platform_dev xhci_devices_configs[USB_MAX_DEVICES] = {
+ {&usb_phy_info[0U]},
+ {&usb_phy_info[1U]}
+};
+
+static int32_t pll_lock_check(uint32_t address, uint32_t bit)
+{
+ uint32_t retry;
+ uint32_t data;
+
+ retry = PLL_LOCK_RETRY_COUNT;
+ do {
+ data = mmio_read_32(address);
+ if ((data & bit) != 0U) {
+ return 0;
+ }
+ udelay(1);
+ } while (--retry != 0);
+
+ ERROR("%s(): FAIL (0x%08x)\n", __func__, address);
+ return -1;
+}
+
+/*
+ * USB2 PHY using external FSM bringup sequence
+ * Total #3 USB2 phys. All phys has the same
+ * bringup sequence. Register bit fields for
+ * some of the PHY's are different.
+ * Bit fields which are different are passed using
+ * struct u2_phy_ext_fsm with bit-fields and register addr.
+ */
+
+static void u2_phy_ext_fsm_power_on(struct u2_phy_ext_fsm *u2_phy)
+{
+ mmio_setbits_32(u2_phy->phy_ctrl_reg, USB2_PHY_ISO);
+ /* Delay as per external FSM spec */
+ udelay(10U);
+
+ mmio_setbits_32(u2_phy->phy_ctrl_reg, u2_phy->phy_iddq);
+ /* Delay as per external FSM spec */
+ udelay(10U);
+
+ mmio_clrbits_32(u2_phy->phy_ctrl_reg,
+ (USB2_AFE_BG_PWRDWNB |
+ USB2_AFE_PLL_PWRDWNB |
+ USB2_AFE_LDO_PWRDWNB |
+ USB2_CTRL_CORERDY));
+
+ mmio_clrsetbits_32(u2_phy->phy_ctrl_reg,
+ (USB2_PHY_PCTL_MASK << USB2_PHY_PCTL_OFFSET),
+ (USB2_PHY_PCTL_VAL << USB2_PHY_PCTL_OFFSET));
+ /* Delay as per external FSM spec */
+ udelay(160U);
+
+ mmio_setbits_32(u2_phy->phy_ctrl_reg, USB2_CTRL_CORERDY);
+ /* Delay as per external FSM spec */
+ udelay(50U);
+
+ mmio_setbits_32(u2_phy->phy_ctrl_reg, USB2_AFE_BG_PWRDWNB);
+ /* Delay as per external FSM spec */
+ udelay(200U);
+
+ mmio_setbits_32(u2_phy->pwr_ctrl_reg, u2_phy->pwr_onin);
+ mmio_setbits_32(u2_phy->phy_ctrl_reg, USB2_AFE_LDO_PWRDWNB);
+ /* Delay as per external FSM spec */
+ udelay(10U);
+
+ mmio_setbits_32(u2_phy->pwr_ctrl_reg, u2_phy->pwr_okin);
+ /* Delay as per external FSM spec */
+ udelay(10U);
+
+ mmio_setbits_32(u2_phy->phy_ctrl_reg, USB2_AFE_PLL_PWRDWNB);
+ /* Delay as per external FSM spec */
+ udelay(10U);
+
+ mmio_clrbits_32(u2_phy->phy_ctrl_reg, USB2_PHY_ISO);
+ /* Delay as per external FSM spec */
+ udelay(10U);
+ mmio_clrbits_32(u2_phy->phy_ctrl_reg, u2_phy->phy_iddq);
+ /* Delay as per external FSM spec */
+ udelay(1U);
+
+ mmio_setbits_32(u2_phy->pll_ctrl_reg, USB2_PLL_RESETB);
+ mmio_setbits_32(u2_phy->phy_ctrl_reg, USB2_PHY_RESETB);
+
+}
+
+static int32_t usb3h_u2_phy_power_on(uint32_t base)
+{
+ int32_t status;
+ struct u2_phy_ext_fsm u2_phy;
+
+ u2_phy.pll_ctrl_reg = base + USB3H_U2PLL_CTRL;
+ u2_phy.phy_ctrl_reg = base + USB3H_U2PHY_CTRL;
+ u2_phy.phy_iddq = USB3H_U2PHY_IDDQ;
+ u2_phy.pwr_ctrl_reg = base + USB3H_PWR_CTRL;
+ u2_phy.pwr_okin = USB3H_PWR_CTRL_U2PHY_DFE_SWITCH_PWROKIN;
+ u2_phy.pwr_onin = USB3H_PWR_CTRL_U2PHY_DFE_SWITCH_PWRONIN;
+
+ u2_phy_ext_fsm_power_on(&u2_phy);
+
+ status = pll_lock_check(base + USB3H_U2PLL_CTRL, USB3H_U2PLL_LOCK);
+ if (status != 0) {
+ /* re-try by toggling the PLL reset */
+ mmio_clrbits_32(base + USB3H_U2PLL_CTRL,
+ (uint32_t)USB3H_U2PLL_RESETB);
+ mmio_setbits_32(base + USB3H_U2PLL_CTRL, USB3H_U2PLL_RESETB);
+ status = pll_lock_check(base + USB3H_U2PLL_CTRL,
+ USB3H_U2PLL_LOCK);
+ if (status != 0)
+ ERROR("%s() re-try PLL lock FAIL (0x%08x)\n", __func__,
+ base + USB3H_U2PLL_CTRL);
+ }
+
+ mmio_clrsetbits_32(base + USB3H_U2PHY_CTRL,
+ (USB3H_U2PHY_PCTL_MASK << USB3H_U2PHY_PCTL_OFFSET),
+ (U2PHY_PCTL_NON_DRV_LOW << USB3H_U2PHY_PCTL_OFFSET));
+ return status;
+}
+
+static int32_t usb3h_u3_phy_power_on(uint32_t base)
+{
+ int32_t status;
+
+ /* Set pctl with mode and soft reset */
+ mmio_clrsetbits_32(base + USB3H_U3PHY_CTRL,
+ (USB3H_U3PHY_PCTL_MASK << USB3H_U3PHY_PCTL_OFFSET),
+ (U3PHY_PCTL_VAL << USB3H_U3PHY_PCTL_OFFSET));
+
+ mmio_clrbits_32(base + USB3H_U3PHY_PLL_CTRL,
+ (uint32_t) USB3H_U3SSPLL_SUSPEND_EN);
+ mmio_setbits_32(base + USB3H_U3PHY_PLL_CTRL, USB3H_U3PLL_SEQ_START);
+ mmio_setbits_32(base + USB3H_U3PHY_PLL_CTRL, USB3H_U3PLL_RESETB);
+
+ /* Time to stabilize the PLL Control */
+ mdelay(1U);
+
+ status = pll_lock_check(base + USB3H_U3PHY_PLL_CTRL,
+ USB3H_U3PLL_SS_LOCK);
+
+ return status;
+}
+
+static int32_t drdu3_u2_phy_power_on(uint32_t base)
+{
+ int32_t status;
+ struct u2_phy_ext_fsm u2_phy;
+
+ u2_phy.pll_ctrl_reg = base + DRDU3_U2PLL_CTRL;
+ u2_phy.phy_ctrl_reg = base + DRDU3_U2PHY_CTRL;
+ u2_phy.phy_iddq = DRDU3_U2PHY_IDDQ;
+ u2_phy.pwr_ctrl_reg = base + DRDU3_PWR_CTRL;
+ u2_phy.pwr_okin = DRDU3_U2PHY_DFE_SWITCH_PWROKIN;
+ u2_phy.pwr_onin = DRDU3_U2PHY_DFE_SWITCH_PWRONIN;
+
+ u2_phy_ext_fsm_power_on(&u2_phy);
+
+ status = pll_lock_check(base + DRDU3_U2PLL_CTRL, DRDU3_U2PLL_LOCK);
+ if (status != 0) {
+ /* re-try by toggling the PLL reset */
+ mmio_clrbits_32(base + DRDU3_U2PLL_CTRL,
+ (uint32_t)DRDU2_U2PLL_RESETB);
+ mmio_setbits_32(base + DRDU3_U2PLL_CTRL, DRDU3_U2PLL_RESETB);
+
+ status = pll_lock_check(base + DRDU3_U2PLL_CTRL,
+ DRDU3_U2PLL_LOCK);
+ if (status != 0) {
+ ERROR("%s() re-try PLL lock FAIL (0x%08x)\n", __func__,
+ base + DRDU3_U2PLL_CTRL);
+ }
+ }
+ mmio_clrsetbits_32(base + DRDU3_U2PHY_CTRL,
+ (DRDU3_U2PHY_PCTL_MASK << DRDU3_U2PHY_PCTL_OFFSET),
+ (U2PHY_PCTL_NON_DRV_LOW << DRDU3_U2PHY_PCTL_OFFSET));
+
+ return status;
+}
+
+static int32_t drdu3_u3_phy_power_on(uint32_t base)
+{
+ int32_t status;
+
+ /* Set pctl with mode and soft reset */
+ mmio_clrsetbits_32(base + DRDU3_U3PHY_CTRL,
+ (DRDU3_U3PHY_PCTL_MASK << DRDU3_U3PHY_PCTL_OFFSET),
+ (U3PHY_PCTL_VAL << DRDU3_U3PHY_PCTL_OFFSET));
+
+ mmio_clrbits_32(base + DRDU3_U3PHY_PLL_CTRL,
+ (uint32_t) DRDU3_U3SSPLL_SUSPEND_EN);
+ mmio_setbits_32(base + DRDU3_U3PHY_PLL_CTRL, DRDU3_U3PLL_SEQ_START);
+ mmio_setbits_32(base + DRDU3_U3PHY_PLL_CTRL, DRDU3_U3PLL_RESETB);
+
+ /* Time to stabilize the PLL Control */
+ mdelay(1U);
+
+ status = pll_lock_check(base + DRDU3_U3PHY_PLL_CTRL,
+ DRDU3_U3PLL_SS_LOCK);
+
+ return status;
+}
+
+static int32_t drdu2_u2_phy_power_on(uint32_t base)
+{
+ int32_t status;
+ struct u2_phy_ext_fsm u2_phy;
+
+ u2_phy.pll_ctrl_reg = base + DRDU2_U2PLL_CTRL;
+ u2_phy.phy_ctrl_reg = base + DRDU2_PHY_CTRL;
+ u2_phy.phy_iddq = DRDU2_U2IDDQ;
+ u2_phy.pwr_ctrl_reg = base + DRDU2_PWR_CTRL;
+ u2_phy.pwr_okin = DRDU2_U2PHY_DFE_SWITCH_PWROKIN_I;
+ u2_phy.pwr_onin = DRDU2_U2PHY_DFE_SWITCH_PWRONIN_I;
+
+ u2_phy_ext_fsm_power_on(&u2_phy);
+
+ status = pll_lock_check(base + DRDU2_U2PLL_CTRL, DRDU2_U2PLL_LOCK);
+ if (status != 0) {
+ /* re-try by toggling the PLL reset */
+ mmio_clrbits_32(base + DRDU2_U2PLL_CTRL,
+ (uint32_t)DRDU2_U2PLL_RESETB);
+ mmio_setbits_32(base + DRDU2_U2PLL_CTRL, DRDU2_U2PLL_RESETB);
+
+ status = pll_lock_check(base + DRDU2_U2PLL_CTRL,
+ DRDU2_U2PLL_LOCK);
+ if (status != 0)
+ ERROR("%s() re-try PLL lock FAIL (0x%08x)\n", __func__,
+ base + DRDU2_U2PLL_CTRL);
+ }
+ mmio_clrsetbits_32(base + DRDU2_PHY_CTRL,
+ (DRDU2_U2PHY_PCTL_MASK << DRDU2_U2PHY_PCTL_OFFSET),
+ (U2PHY_PCTL_NON_DRV_LOW << DRDU2_U2PHY_PCTL_OFFSET));
+
+ return status;
+}
+
+void u3h_u2drd_phy_reset(usb_phy_port_t *phy_port)
+{
+ usb_phy_t *phy = phy_port->p;
+
+ switch (phy_port->port_id) {
+ case USB3HS_PORT:
+ mmio_clrbits_32(phy->usb3hreg + USB3H_U2PHY_CTRL,
+ (uint32_t) USB3H_U2CTRL_CORERDY);
+ mmio_setbits_32(phy->usb3hreg + USB3H_U2PHY_CTRL,
+ USB3H_U2CTRL_CORERDY);
+ break;
+ case DRDU2_PORT:
+ mmio_clrbits_32(phy->drdu2reg + DRDU2_PHY_CTRL,
+ (uint32_t) DRDU2_U2CTRL_CORERDY);
+ mmio_setbits_32(phy->drdu2reg + DRDU2_PHY_CTRL,
+ DRDU2_U2CTRL_CORERDY);
+ break;
+ }
+}
+
+void u3drd_phy_reset(usb_phy_port_t *phy_port)
+{
+ usb_phy_t *phy = phy_port->p;
+
+ if (phy_port->port_id == DRD3HS_PORT) {
+ mmio_clrbits_32(phy->drdu3reg + DRDU3_U2PHY_CTRL,
+ (uint32_t) DRDU3_U2CTRL_CORERDY);
+ mmio_setbits_32(phy->drdu3reg + DRDU3_U2PHY_CTRL,
+ DRDU3_U2CTRL_CORERDY);
+ }
+}
+
+static int32_t u3h_u2drd_phy_power_on(usb_phy_port_t *phy_port)
+{
+ usb_phy_t *phy = phy_port->p;
+ int32_t status;
+
+ switch (phy_port->port_id) {
+ case USB3SS_PORT:
+ mmio_clrbits_32(phy->usb3hreg + USB3H_PHY_PWR_CTRL,
+ (uint32_t) USB3H_DISABLE_USB30_P0);
+ status = usb3h_u3_phy_power_on(phy->usb3hreg);
+ if (status != 0) {
+ goto err_usb3h_phy_on;
+ }
+ break;
+ case USB3HS_PORT:
+ mmio_clrbits_32(phy->usb3hreg + USB3H_PHY_PWR_CTRL,
+ (uint32_t) USB3H_DISABLE_EUSB_P1);
+ mmio_setbits_32(AXI_DEBUG_CTRL,
+ AXI_DBG_CTRL_SSPHY_DRD_MODE_DISABLE);
+ mmio_setbits_32(USB3H_DEBUG_CTRL,
+ USB3H_DBG_CTRL_SSPHY_DRD_MODE_DISABLE);
+
+ mmio_clrbits_32(phy->usb3hreg + USB3H_PWR_CTRL,
+ USB3H_PWR_CTRL_U2PHY_DFE_SWITCH_PWRONIN);
+ /* Delay as per external FSM spec */
+ udelay(10U);
+ mmio_clrbits_32(phy->usb3hreg + USB3H_PWR_CTRL,
+ USB3H_PWR_CTRL_U2PHY_DFE_SWITCH_PWROKIN);
+ status = usb3h_u2_phy_power_on(phy->usb3hreg);
+ if (status != 0) {
+ goto err_usb3h_phy_on;
+ }
+ break;
+ case DRDU2_PORT:
+ mmio_clrbits_32(phy->usb3hreg + USB3H_PHY_PWR_CTRL,
+ (uint32_t) USB3H_DISABLE_EUSB_P0);
+ mmio_setbits_32(AXI_DEBUG_CTRL,
+ AXI_DBG_CTRL_SSPHY_DRD_MODE_DISABLE);
+ mmio_setbits_32(USB3H_DEBUG_CTRL,
+ USB3H_DBG_CTRL_SSPHY_DRD_MODE_DISABLE);
+
+ mmio_clrbits_32(phy->usb3hreg + DRDU2_PWR_CTRL,
+ DRDU2_U2PHY_DFE_SWITCH_PWRONIN_I);
+ /* Delay as per external FSM spec */
+ udelay(10U);
+ mmio_clrbits_32(phy->usb3hreg + DRDU2_PWR_CTRL,
+ DRDU2_U2PHY_DFE_SWITCH_PWROKIN_I);
+
+ status = drdu2_u2_phy_power_on(phy->drdu2reg);
+ if (status != 0) {
+ mmio_setbits_32(phy->usb3hreg + USB3H_PHY_PWR_CTRL,
+ USB3H_DISABLE_EUSB_P0);
+ goto err_drdu2_phy_on;
+ }
+ break;
+ }
+
+ /* Device Mode */
+ if (phy_port->port_id == DRDU2_PORT) {
+ mmio_write_32(phy->drdu2reg + DRDU2_SOFT_RESET_CTRL,
+ DRDU2_BDC_AXI_SOFT_RST_N);
+ mmio_setbits_32(phy->drdu2reg + DRDU2_PHY_CTRL,
+ DRDU2_U2SOFT_RST_N);
+ }
+ /* Host Mode */
+ mmio_write_32(phy->usb3hreg + USB3H_SOFT_RESET_CTRL,
+ USB3H_XHC_AXI_SOFT_RST_N);
+ mmio_setbits_32(phy->usb3hreg + USB3H_U3PHY_CTRL, USB3H_U3SOFT_RST_N);
+
+ return 0U;
+ err_usb3h_phy_on:mmio_setbits_32(phy->usb3hreg + USB3H_PHY_PWR_CTRL,
+ (USB3H_DISABLE_EUSB_P1 |
+ USB3H_DISABLE_USB30_P0));
+ err_drdu2_phy_on:
+
+ return status;
+}
+
+static int32_t u3drd_phy_power_on(usb_phy_port_t *phy_port)
+{
+ usb_phy_t *phy = phy_port->p;
+ int32_t status;
+
+ switch (phy_port->port_id) {
+ case DRD3SS_PORT:
+ mmio_clrbits_32(phy->drdu3reg + DRDU3_PHY_PWR_CTRL,
+ (uint32_t) DRDU3_DISABLE_USB30_P0);
+
+ status = drdu3_u3_phy_power_on(phy->drdu3reg);
+ if (status != 0) {
+ goto err_drdu3_phy_on;
+ }
+ break;
+ case DRD3HS_PORT:
+ mmio_clrbits_32(phy->drdu3reg + DRDU3_PHY_PWR_CTRL,
+ (uint32_t) DRDU3_DISABLE_EUSB_P0);
+ mmio_setbits_32(AXI_DEBUG_CTRL,
+ AXI_DBG_CTRL_SSPHY_DRD_MODE_DISABLE);
+ mmio_setbits_32(USB3H_DEBUG_CTRL,
+ USB3H_DBG_CTRL_SSPHY_DRD_MODE_DISABLE);
+
+ mmio_clrbits_32(phy->drdu3reg + DRDU3_PWR_CTRL,
+ DRDU3_U2PHY_DFE_SWITCH_PWRONIN);
+ /* Delay as per external FSM spec */
+ udelay(10U);
+ mmio_clrbits_32(phy->drdu3reg + DRDU3_PWR_CTRL,
+ DRDU3_U2PHY_DFE_SWITCH_PWROKIN);
+
+ status = drdu3_u2_phy_power_on(phy->drdu3reg);
+ if (status != 0) {
+ goto err_drdu3_phy_on;
+ }
+
+ /* Host Mode */
+ mmio_setbits_32(phy->drdu3reg + DRDU3_SOFT_RESET_CTRL,
+ DRDU3_XHC_AXI_SOFT_RST_N);
+ mmio_setbits_32(phy->drdu3reg + DRDU3_U3PHY_CTRL,
+ DRDU3_U3XHC_SOFT_RST_N);
+ /* Device Mode */
+ mmio_setbits_32(phy->drdu3reg + DRDU3_SOFT_RESET_CTRL,
+ DRDU3_BDC_AXI_SOFT_RST_N);
+ mmio_setbits_32(phy->drdu3reg + DRDU3_U3PHY_CTRL,
+ DRDU3_U3BDC_SOFT_RST_N);
+ break;
+ }
+
+ return 0U;
+ err_drdu3_phy_on:mmio_setbits_32(phy->drdu3reg + DRDU3_PHY_PWR_CTRL,
+ (DRDU3_DISABLE_EUSB_P0 |
+ DRDU3_DISABLE_USB30_P0));
+
+ return status;
+}
+
+static void u3h_u2drd_phy_power_off(usb_phy_port_t *phy_port)
+{
+ usb_phy_t *p = phy_port->p;
+
+ switch (phy_port->port_id) {
+ case USB3SS_PORT:
+ mmio_setbits_32(p->usb3hreg + USB3H_PHY_PWR_CTRL,
+ USB3H_DISABLE_USB30_P0);
+ break;
+ case USB3HS_PORT:
+ mmio_setbits_32(p->usb3hreg + USB3H_PHY_PWR_CTRL,
+ USB3H_DISABLE_EUSB_P1);
+ break;
+ case DRDU2_PORT:
+ mmio_setbits_32(p->usb3hreg + USB3H_PHY_PWR_CTRL,
+ USB3H_DISABLE_EUSB_P0);
+ break;
+ }
+}
+
+static void u3drd_phy_power_off(usb_phy_port_t *phy_port)
+{
+ usb_phy_t *p = phy_port->p;
+
+ switch (phy_port->port_id) {
+ case DRD3SS_PORT:
+ mmio_setbits_32(p->drdu3reg + DRDU3_PHY_PWR_CTRL,
+ DRDU3_DISABLE_USB30_P0);
+ break;
+ case DRD3HS_PORT:
+ mmio_setbits_32(p->drdu3reg + DRDU3_PHY_PWR_CTRL,
+ DRDU3_DISABLE_EUSB_P0);
+ break;
+ }
+}
+
+int32_t usb_info_fill(usb_phy_t *phy_info)
+{
+ int32_t index;
+
+ if (phy_info->initialized != 0U) {
+ return USB_PHY_ALREADY_STARTED;
+ }
+
+ if (phy_info->phy_id == USB3H_DRDU2_PHY) {
+ phy_info->phy_port = usb_phy_port[USB3H_DRDU2_PHY - 1U];
+ phy_info->ports_enabled = 0x7U;
+ } else {
+ phy_info->phy_port = usb_phy_port[DRDU3_PHY - 1U];
+ phy_info->ports_enabled = 0x3U;
+ }
+
+ for (index = MAX_NR_PORTS - 1U; index > -1; index--) {
+ phy_info->phy_port[index].enabled = (phy_info->ports_enabled
+ >> index) & 0x1U;
+ phy_info->phy_port[index].p = phy_info;
+ phy_info->phy_port[index].port_id = index;
+ }
+
+ return 0U;
+}
+
+int32_t usb_phy_init(usb_platform_dev *device)
+{
+ int32_t status;
+ usb_phy_t *phy_info;
+ uint32_t index;
+
+ phy_info = (usb_phy_t *)device->pcd_id;
+
+ status = usb_info_fill(phy_info);
+ if (status != 0) {
+ return (status == USB_PHY_ALREADY_STARTED) ? 0 : status;
+ }
+
+ for (index = 0U; index < MAX_NR_PORTS; index++) {
+ if (phy_info->phy_port[index].enabled != 0U) {
+ switch (phy_info->phy_id) {
+ case USB3H_DRDU2_PHY:
+ status =
+ u3h_u2drd_phy_power_on(&phy_info->
+ phy_port[index]);
+ break;
+ default:
+ status =
+ u3drd_phy_power_on(&phy_info->
+ phy_port[index]);
+ }
+ }
+ }
+
+ phy_info->initialized = !status;
+ return status;
+}
+
+void usb_phy_shutdown(usb_platform_dev *device)
+{
+ usb_phy_t *phy_info;
+ uint32_t index;
+
+ phy_info = (usb_phy_t *)device->pcd_id;
+
+ phy_info->initialized = 0U;
+
+ for (index = 0U; index < MAX_NR_PORTS; index++) {
+ if (phy_info->phy_port[index].enabled != 0U) {
+ switch (phy_info->phy_id) {
+ case USB3H_DRDU2_PHY:
+ u3h_u2drd_phy_power_off(&phy_info->
+ phy_port[index]);
+ break;
+ case DRDU3_PHY:
+ u3drd_phy_power_off(&phy_info->phy_port[index]);
+ break;
+ default:
+ INFO("%s: invalid phy id 0x%x\n", __func__,
+ phy_info->phy_id);
+ }
+ }
+ }
+}
+
+int32_t usb_xhci_init(usb_platform_dev *device)
+{
+ int32_t status;
+
+ status = usb_phy_init(device);
+ if (status == USB_PHY_ALREADY_STARTED) {
+ status = 0U;
+ }
+
+ return status;
+}
+
+int32_t usb_device_init(unsigned int usb_func)
+{
+ int32_t status;
+ int32_t devices_initialized = 0U;
+
+ if ((usb_func & USB3H_USB2DRD) != 0U) {
+ status = usb_xhci_init(
+ &xhci_devices_configs[USB3H_USB2DRD_PHY]);
+ if (status == 0) {
+ devices_initialized++;
+ } else {
+ ERROR("%s(): USB3H_USB2DRD init failure\n", __func__);
+ }
+ }
+
+ if ((usb_func & USB3_DRD) != 0U) {
+ status = usb_xhci_init(&xhci_devices_configs[USB3_DRD_PHY]);
+ if (status == 0) {
+ devices_initialized++;
+ } else {
+ ERROR("%s(): USB3_DRD init failure\n", __func__);
+ }
+ }
+
+ return devices_initialized;
+}
diff --git a/plat/brcm/board/stingray/include/bl33_info.h b/plat/brcm/board/stingray/include/bl33_info.h
new file mode 100644
index 0000000..1dac48c
--- /dev/null
+++ b/plat/brcm/board/stingray/include/bl33_info.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BL33_INFO_H
+#define BL33_INFO_H
+
+/* Increase version number each time this file is modified */
+#define BL33_INFO_VERSION 4
+
+struct chip_info {
+ unsigned int chip_id;
+ unsigned int rev_id;
+};
+
+struct boot_time_info {
+ unsigned int bl1_start;
+ unsigned int bl1_end;
+ unsigned int bl2_start;
+ unsigned int bl2_end;
+ unsigned int bl31_start;
+ unsigned int bl31_end;
+ unsigned int bl32_start;
+ unsigned int bl32_end;
+ unsigned int bl33_start;
+ unsigned int bl33_prompt;
+ unsigned int bl33_end;
+};
+
+struct bl33_info {
+ unsigned int version;
+ struct chip_info chip;
+ struct boot_time_info boot_time_info;
+};
+
+#endif
diff --git a/plat/brcm/board/stingray/include/board_info.h b/plat/brcm/board/stingray/include/board_info.h
new file mode 100644
index 0000000..8901259
--- /dev/null
+++ b/plat/brcm/board/stingray/include/board_info.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BOARD_INFO_H
+#define BOARD_INFO_H
+
+#define IHOST_REG_INTEGRATED 0
+#define IHOST_REG_EXT_PROGRAMMABLE 1
+#define IHOST_REG_EXT_FIXED 2
+
+#if defined(IHOST_REG_TYPE)
+ #if ((IHOST_REG_TYPE != IHOST_REG_INTEGRATED) && \
+ (IHOST_REG_TYPE != IHOST_REG_EXT_PROGRAMMABLE) && \
+ (IHOST_REG_TYPE != IHOST_REG_EXT_FIXED))
+ #error "IHOST_REG_TYPE not valid"
+ #endif
+#else
+ #define IHOST_REG_TYPE IHOST_REG_INTEGRATED
+#endif
+
+#define VDDC_REG_INTEGRATED 0
+#define VDDC_REG_EXT_PROGRAMMABLE 1
+#define VDDC_REG_EXT_FIXED 2
+
+#if defined(VDDC_REG_TYPE)
+ #if ((VDDC_REG_TYPE != VDDC_REG_INTEGRATED) && \
+ (VDDC_REG_TYPE != VDDC_REG_EXT_PROGRAMMABLE) && \
+ (VDDC_REG_TYPE != VDDC_REG_EXT_FIXED))
+ #error "VDDC_REG_TYPE not valid"
+ #endif
+#else
+ #define VDDC_REG_TYPE VDDC_REG_INTEGRATED
+#endif
+
+#endif
diff --git a/plat/brcm/board/stingray/include/crmu_def.h b/plat/brcm/board/stingray/include/crmu_def.h
new file mode 100644
index 0000000..ebc2bb6
--- /dev/null
+++ b/plat/brcm/board/stingray/include/crmu_def.h
@@ -0,0 +1,227 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CRMU_DEF_H
+#define CRMU_DEF_H
+
+#define CRMU_REGS_BASE 0x66410000
+/* 32 kB IDRAM */
+#define CRMU_IDRAM_BASE_ADDR CRMU_REGS_BASE
+#define CRMU_IDRAM_SIZE 0x8000
+/* 4 kB Scratch RAM */
+#define CRMU_SRAM_BASE (CRMU_IDRAM_BASE_ADDR + CRMU_IDRAM_SIZE)
+#define CRMU_SRAM_SIZE 0x1000
+
+#define CRMU_RESERVED_SPACE 0x3000
+#define CRMU_CORE_BASE (CRMU_SRAM_BASE + CRMU_SRAM_SIZE + \
+ CRMU_RESERVED_SPACE)
+
+#define CRMU_SHARED_SRAM_BASE CRMU_SRAM_BASE
+#define CRMU_SHARED_SRAM_SIZE 0x200
+#define CRMU_CFG_BASE (CRMU_SHARED_SRAM_BASE + \
+ CRMU_SHARED_SRAM_SIZE)
+
+#define CRMU_PWR_GOOD_STATUS CRMU_CORE_BASE
+#define CRMU_PWR_GOOD_STATUS__BBL_POWER_GOOD 0
+#define CRMU_ISO_CELL_CONTROL (CRMU_CORE_BASE + 0x4)
+#define CRMU_ISO_CELL_CONTROL__CRMU_ISO_PDBBL 16
+#define CRMU_ISO_CELL_CONTROL__CRMU_ISO_PDBBL_TAMPER 24
+#define CRMU_SPRU_SOURCE_SEL_STAT (CRMU_CORE_BASE + 0xc)
+#define CRMU_SPRU_SOURCE_SEL_STAT__SPRU_SOURCE_SELECT 0
+#define BSTI_BASE (CRMU_CORE_BASE + 0x28)
+#define BSTI_CONTROL_OFFSET BSTI_BASE
+#define BSTI_COMMAND_OFFSET (BSTI_BASE + 0x4)
+
+#define OCOTP_REGS_BASE (CRMU_CORE_BASE + 0x400)
+
+#define CRMU_TCI_BASE (CRMU_CORE_BASE + 0x800)
+#define CRMU_SWREG_STATUS_ADDR (CRMU_TCI_BASE + 0x0c)
+#define CRMU_CHIP_OTPC_STATUS (CRMU_TCI_BASE + 0x10)
+#define CRMU_CHIP_OTPC_STATUS__OTP_BISR_LOAD_DONE 19
+#define CRMU_BISR_PDG_MASK (CRMU_TCI_BASE + 0x4c)
+#define CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST0 2
+#define CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST1 3
+#define CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST2 4
+#define CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST3 0
+#define CRMU_POWER_POLL (CRMU_TCI_BASE + 0x60)
+#define CRMU_OTP_STATUS CRMU_POWER_POLL
+#define CRMU_OTP_STATUS_BIT 1
+#define CRMU_DDR_PHY_AON_CTRL (CRMU_TCI_BASE + 0x64)
+#define CRMU_DDRPHY2_HW_RESETN_R BIT(21)
+#define CRMU_DDRPHY2_PWROKIN_PHY_R BIT(20)
+#define CRMU_DDRPHY2_PWRONIN_PHY_R BIT(19)
+#define CRMU_DDRPHY2_ISO_PHY_DFI_R BIT(18)
+#define CRMU_DDRPHY2_ISO_PHY_REGS_R BIT(17)
+#define CRMU_DDRPHY2_ISO_PHY_PLL_R BIT(16)
+#define CRMU_DDRPHY1_HW_RESETN_R BIT(13)
+#define CRMU_DDRPHY1_PWROKIN_PHY_R BIT(12)
+#define CRMU_DDRPHY1_PWRONIN_PHY_R BIT(11)
+#define CRMU_DDRPHY1_ISO_PHY_DFI_R BIT(10)
+#define CRMU_DDRPHY1_ISO_PHY_REGS_R BIT(9)
+#define CRMU_DDRPHY1_ISO_PHY_PLL_R BIT(8)
+#define CRMU_DDRPHY0_HW_RESETN_R BIT(5)
+#define CRMU_DDRPHY0_PWROKIN_PHY_R BIT(4)
+#define CRMU_DDRPHY0_PWRONIN_PHY_R BIT(3)
+#define CRMU_DDRPHY0_ISO_PHY_DFI_R BIT(2)
+#define CRMU_DDRPHY0_ISO_PHY_REGS_R BIT(1)
+#define CRMU_DDRPHY0_ISO_PHY_PLL_R BIT(0)
+#define CRMU_EMEM_RESET_N_R BIT(16)
+#define CRMU_EMEM_PRESET_N_R BIT(0)
+#define CRMU_SWREG_CTRL_ADDR (CRMU_TCI_BASE + 0x6c)
+#define CRMU_AON_CTRL1 (CRMU_TCI_BASE + 0x70)
+#define CRMU_AON_CTRL1__LCPLL1_ISO_IN 18
+#define CRMU_AON_CTRL1__LCPLL1_PWRON_LDO 19
+#define CRMU_AON_CTRL1__LCPLL1_PWR_ON 20
+#define CRMU_AON_CTRL1__LCPLL0_ISO_IN 21
+#define CRMU_AON_CTRL1__LCPLL0_PWRON_LDO 22
+#define CRMU_AON_CTRL1__LCPLL0_PWR_ON 23
+#define CRMU_PCIE_LCPLL_PWR_ON_SHIFT 29
+#define CRMU_PCIE_LCPLL_PWR_ON_MASK BIT(CRMU_PCIE_LCPLL_PWR_ON_SHIFT)
+#define CRMU_PCIE_LCPLL_PWRON_LDO_SHIFT 28
+#define CRMU_PCIE_LCPLL_PWRON_LDO_MASK BIT(CRMU_PCIE_LCPLL_PWRON_LDO_SHIFT)
+#define CRMU_PCIE_LCPLL_ISO_IN_SHIFT 27
+#define CRMU_PCIE_LCPLL_ISO_IN_MASK BIT(CRMU_PCIE_LCPLL_ISO_IN_SHIFT)
+#define CRMU_MASTER_AXI_ARUSER_CONFIG (CRMU_TCI_BASE + 0x74)
+#define CRMU_MASTER_AXI_AWUSER_CONFIG (CRMU_TCI_BASE + 0x78)
+#define CRMU_DDR_PHY_AON_CTRL_1 (CRMU_TCI_BASE + 0x8c)
+
+#define CDRU_BASE_ADDR (CRMU_CORE_BASE + 0x1000)
+#define CDRU_MISC_RESET_CONTROL CDRU_BASE_ADDR
+#define CDRU_MISC_RESET_CONTROL_TS_RESET_N 16
+#define CDRU_MISC_RESET_CONTROL__CDRU_USBSS_RESET_N 14
+#define CDRU_MISC_RESET_CONTROL__CDRU_SATA_RESET_N_R 15
+#define CDRU_MISC_RESET_CONTROL__CDRU_MHB_RESET_N_R 13
+#define CDRU_MISC_RESET_CONTROL__CDRU_PCIE_RESET_N_R 3
+#define CDRU_MISC_RESET_CONTROL__CDRU_PM_RESET_N_R 2
+#define CDRU_MISC_RESET_CONTROL__CDRU_NITRO_RESET_N_R 1
+
+#define CDRU_PROC_EVENT_CLEAR (CDRU_BASE_ADDR + 0x48)
+#define CDRU_PROC_EVENT_CLEAR__IH0_CDRU_STANDBYWFIL2 0
+#define CDRU_PROC_EVENT_CLEAR__IH0_CDRU_STANDBYWFI 3
+#define CDRU_PROC_EVENT_CLEAR__IH1_CDRU_STANDBYWFIL2 5
+#define CDRU_PROC_EVENT_CLEAR__IH1_CDRU_STANDBYWFI 8
+#define CDRU_PROC_EVENT_CLEAR__IH2_CDRU_STANDBYWFIL2 10
+#define CDRU_PROC_EVENT_CLEAR__IH2_CDRU_STANDBYWFI 13
+#define CDRU_PROC_EVENT_CLEAR__IH3_CDRU_STANDBYWFIL2 15
+#define CDRU_PROC_EVENT_CLEAR__IH3_CDRU_STANDBYWFI 18
+
+#define CDRU_CHIP_STRAP_CTRL (CDRU_BASE_ADDR + 0x50)
+#define CDRU_CHIP_STRAP_CTRL__SOFTWARE_OVERRIDE 31
+
+#define CDRU_CHIP_IO_PAD_CONTROL (CDRU_BASE_ADDR + 0x58)
+#define CDRU_CHIP_IO_PAD_CONTROL__CDRU_IOMUX_FORCE_PDN_R 8
+#define CDRU_CHIP_IO_PAD_CONTROL__CDRU_IOMUX_FORCE_PAD_IN_R 0
+
+#define CDRU_CHIP_STRAP_DATA_LSW (CDRU_BASE_ADDR + 0x5c)
+#define CDRU_CHIP_STRAP_DATA_LSW__BISR_BYPASS_MODE 18
+#define CDRU_CHIP_STRAP_DATA_LSW__NIC_MODE_MASK BIT(8)
+#define CDRU_CHIP_STRAP_DATA_LSW_PAD_USB_MODE BIT(26)
+
+#define CDRU_CHIP_STRAP_DATA (CDRU_BASE_ADDR + 0x5c)
+#define CDRU_DDR0_CONTROL_OFFSET (CDRU_BASE_ADDR + 0xb8)
+#define CDRU_DDR1_CONTROL_OFFSET (CDRU_BASE_ADDR + 0xbc)
+#define CDRU_DDR2_CONTROL_OFFSET (CDRU_BASE_ADDR + 0xc0)
+#define CRMU_SW_POR_RESET_CTRL (CDRU_BASE_ADDR + 0x100)
+
+#define CDRU_GENPLL2_CONTROL1 (CDRU_BASE_ADDR + 0x1b0)
+#define CDRU_GENPLL2_CONTROL1__CHNL6_FS4_CLK BIT(11)
+#define CDRU_GENPLL5_CONTROL1 (CDRU_BASE_ADDR + 0x24c)
+#define CDRU_GENPLL5_CONTROL1__CHNL0_DME_CLK BIT(6)
+#define CDRU_GENPLL5_CONTROL1__CHNL1_CRYPTO_AE_CLK BIT(7)
+#define CDRU_GENPLL5_CONTROL1__CHNL2_RAID_AE_CLK BIT(8)
+
+#define CDRU_NITRO_CONTROL (CDRU_BASE_ADDR + 0x2c4)
+#define CDRU_NITRO_CONTROL__CDRU_NITRO_SEC_MODE_R 20
+#define CDRU_NITRO_CONTROL__CDRU_NITRO_SEC_OVERRIDE_R 16
+
+#define CDRU_MISC_CLK_ENABLE_CONTROL (CDRU_BASE_ADDR + 0x2c8)
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_EMEM2_CLK_EN_R 11
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_EMEM1_CLK_EN_R 10
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_EMEM0_CLK_EN_R 9
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_SATA_CLK_EN_R 8
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_USBSS_CLK_EN_R 7
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_MHB_CLK_EN_R 6
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_HSLS_CLK_EN_R 5
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_SCR_CLK_EN_R 4
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_FS4_CLK_EN_R 3
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_PCIE_CLK_EN_R 2
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_PM_CLK_EN_R 1
+#define CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_NITRO_CLK_EN_R 0
+
+#define CDRU_CCN_REGISTER_CONTROL_1 (CDRU_BASE_ADDR + 0x324)
+#define CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_EMEM0_BIT 6
+#define CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_EMEM1_BIT 5
+#define CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_EMEM2_BIT 4
+
+#define CDRU_CHIP_TOP_SPARE_REG0 (CDRU_BASE_ADDR + 0x378)
+#define CDRU_CHIP_TOP_SPARE_REG1 (CDRU_BASE_ADDR + 0x37c)
+
+#define CENTRAL_TIMER_BASE (CRMU_CORE_BASE + 0x5000)
+#define CENTRAL_TIMER_CTRL (CENTRAL_TIMER_BASE + 0x0)
+#define CENTRAL_TIMER_GET_L (CENTRAL_TIMER_BASE + 0x4)
+#define CENTRAL_TIMER_GET_L0 (CENTRAL_TIMER_BASE + 0x8) /* SCR STM */
+#define CENTRAL_TIMER_GET_L1 (CENTRAL_TIMER_BASE + 0xC) /* FS STM */
+#define CENTRAL_TIMER_GET_L2 (CENTRAL_TIMER_BASE + 0x10) /* iHost0 */
+#define CENTRAL_TIMER_GET_L3 (CENTRAL_TIMER_BASE + 0x14) /* iHost1 */
+#define CENTRAL_TIMER_GET_L4 (CENTRAL_TIMER_BASE + 0x18) /* iHost2 */
+#define CENTRAL_TIMER_GET_L5 (CENTRAL_TIMER_BASE + 0x1C) /* iHost3 */
+#define CENTRAL_TIMER_GET_H (CENTRAL_TIMER_BASE + 0x28)
+#define CENTRAL_TIMER_SAT_TMR_ENA (CENTRAL_TIMER_BASE + 0x34)
+#define CENTRAL_TIMER_GET_IHOST_ENA_BASE (CENTRAL_TIMER_GET_L2)
+
+#define CRMU_WDT_REGS_BASE (CRMU_CORE_BASE + 0x6000)
+
+#define CRMU_MAIL_BOX0 (CRMU_CORE_BASE + 0x8024)
+#define CRMU_MAIL_BOX1 (CRMU_CORE_BASE + 0x8028)
+#define CRMU_READ_MAIL_BOX0 (CRMU_CORE_BASE + 0x802c)
+#define CRMU_READ_MAIL_BOX1 (CRMU_CORE_BASE + 0x8030)
+#define AP_TO_SCP_MAILBOX1 CRMU_MAIL_BOX1
+#define SCP_TO_AP_MAILBOX1 CRMU_READ_MAIL_BOX1
+#define CRMU_IHOST_POWER_CONFIG (CRMU_CORE_BASE + 0x8038)
+#define CRMU_RESET_EVENT_LOG (CRMU_CORE_BASE + 0x8064)
+#define CRMU_SOFT_RESET_CTRL (CRMU_CORE_BASE + 0x8090)
+#define CRMU_SOFT_RESET_CTRL__SOFT_PWR_UP_RST 0
+#define CRMU_SOFT_RESET_CTRL__SOFT_SYS_RST 1
+#define CRMU_SPARE_REG_0 (CRMU_CORE_BASE + 0x80b8)
+#define CRMU_SPARE_REG_1 (CRMU_CORE_BASE + 0x80bc)
+#define CRMU_SPARE_REG_2 (CRMU_CORE_BASE + 0x80c0)
+#define CRMU_SPARE_REG_3 (CRMU_CORE_BASE + 0x80c4)
+#define CRMU_SPARE_REG_4 (CRMU_CORE_BASE + 0x80c8)
+#define CRMU_SPARE_REG_5 (CRMU_CORE_BASE + 0x80cc)
+#define CRMU_CORE_ADDR_RANGE0_LOW (CRMU_CORE_BASE + 0x8c30)
+#define CRMU_CORE_ADDR_RANGE1_LOW (CRMU_CORE_BASE + 0x8c38)
+#define CRMU_CORE_ADDR_RANGE2_LOW (CRMU_CORE_BASE + 0x8c40)
+#define CRMU_IHOST_SW_PERSISTENT_REG0 (CRMU_CORE_BASE + 0x8c54)
+#define CRMU_IHOST_SW_PERSISTENT_REG1 (CRMU_CORE_BASE + 0x8c58)
+#define CRMU_IHOST_SW_PERSISTENT_REG2 (CRMU_CORE_BASE + 0x8c5c)
+#define CRMU_IHOST_SW_PERSISTENT_REG3 (CRMU_CORE_BASE + 0x8c60)
+#define CRMU_IHOST_SW_PERSISTENT_REG4 (CRMU_CORE_BASE + 0x8c64)
+#define CRMU_IHOST_SW_PERSISTENT_REG5 (CRMU_CORE_BASE + 0x8c68)
+#define CRMU_IHOST_SW_PERSISTENT_REG6 (CRMU_CORE_BASE + 0x8c6c)
+#define CRMU_IHOST_SW_PERSISTENT_REG7 (CRMU_CORE_BASE + 0x8c70)
+#define CRMU_BBL_AUTH_CHECK (CRMU_CORE_BASE + 0x8c78)
+#define CRMU_SOTP_NEUTRALIZE_ENABLE (CRMU_CORE_BASE + 0x8c84)
+#define CRMU_IHOST_SW_PERSISTENT_REG8 (CRMU_CORE_BASE + 0x8c88)
+#define CRMU_IHOST_SW_PERSISTENT_REG9 (CRMU_CORE_BASE + 0x8c8c)
+#define CRMU_IHOST_SW_PERSISTENT_REG10 (CRMU_CORE_BASE + 0x8c90)
+#define CRMU_IHOST_SW_PERSISTENT_REG11 (CRMU_CORE_BASE + 0x8c94)
+
+#define CNT_CONTROL_BASE (CRMU_CORE_BASE + 0x9000)
+#define CNTCR (CNT_CONTROL_BASE)
+#define CNTCR__EN BIT(0)
+
+#define SPRU_BBL_WDATA (CRMU_CORE_BASE + 0xa000)
+#define SPRU_BBL_CMD (CRMU_CORE_BASE + 0xa004)
+#define SPRU_BBL_CMD__IND_SOFT_RST_N 10
+#define SPRU_BBL_CMD__IND_WR 11
+#define SPRU_BBL_CMD__BBL_ADDR_R 0
+#define SPRU_BBL_CMD__IND_RD 12
+#define SPRU_BBL_CMD__BBL_ADDR_R 0
+#define SPRU_BBL_STATUS (CRMU_CORE_BASE + 0xa008)
+#define SPRU_BBL_STATUS__ACC_DONE 0
+#define SPRU_BBL_RDATA (CRMU_CORE_BASE + 0xa00c)
+
+#endif /* CRMU_DEF_H */
diff --git a/plat/brcm/board/stingray/include/ddr_init.h b/plat/brcm/board/stingray/include/ddr_init.h
new file mode 100644
index 0000000..0c135b1
--- /dev/null
+++ b/plat/brcm/board/stingray/include/ddr_init.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef DDR_INIT_H
+#define DDR_INIT_H
+
+#include <fru.h>
+
+#pragma weak ddr_initialize
+#pragma weak ddr_secure_region_config
+#pragma weak ddr_info_save
+#pragma weak get_active_ddr_channel
+#pragma weak is_warmboot
+
+void ddr_initialize(struct ddr_info *ddr)
+{
+}
+
+void ddr_secure_region_config(uint64_t start, uint64_t end)
+{
+}
+
+void ddr_info_save(void)
+{
+}
+
+unsigned char get_active_ddr_channel(void)
+{
+ return 0;
+}
+
+static inline unsigned int is_warmboot(void)
+{
+ return 0;
+}
+#endif
diff --git a/plat/brcm/board/stingray/include/fsx.h b/plat/brcm/board/stingray/include/fsx.h
new file mode 100644
index 0000000..c52ff0a
--- /dev/null
+++ b/plat/brcm/board/stingray/include/fsx.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FSX_H
+#define FSX_H
+
+#include <stdbool.h>
+
+typedef enum FSX_TYPE {
+ eFS4_RAID,
+ eFS4_CRYPTO,
+ eFS6_PKI,
+} eFSX_TYPE;
+
+void fsx_init(eFSX_TYPE fsx_type,
+ unsigned int ring_count,
+ unsigned int dme_count,
+ unsigned int ae_count,
+ unsigned int start_stream_id,
+ unsigned int msi_dev_id,
+ uintptr_t idm_io_control_direct,
+ uintptr_t idm_reset_control,
+ uintptr_t base,
+ uintptr_t dme_base);
+
+void fsx_meminit(const char *name,
+ uintptr_t idm_io_control_direct,
+ uintptr_t idm_io_status);
+
+void fs4_disable_clocks(bool disable_sram,
+ bool disable_crypto,
+ bool disable_raid);
+
+#endif /* FSX_H */
diff --git a/plat/brcm/board/stingray/include/ihost_pm.h b/plat/brcm/board/stingray/include/ihost_pm.h
new file mode 100644
index 0000000..83493ab
--- /dev/null
+++ b/plat/brcm/board/stingray/include/ihost_pm.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IHOST_PM
+#define IHOST_PM
+
+#include <stdint.h>
+
+#define CLUSTER_POWER_ON 0x1
+#define CLUSTER_POWER_OFF 0x0
+
+void ihost_power_on_cluster(u_register_t mpidr);
+void ihost_power_on_secondary_core(u_register_t mpidr, uint64_t rvbar);
+void ihost_enable_satellite_timer(unsigned int cluster_id);
+
+#endif
diff --git a/plat/brcm/board/stingray/include/iommu.h b/plat/brcm/board/stingray/include/iommu.h
new file mode 100644
index 0000000..e7b2985
--- /dev/null
+++ b/plat/brcm/board/stingray/include/iommu.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IOMMU_H
+#define IOMMU_H
+
+enum iommu_domain {
+ PCIE_PAXC,
+ DOMAIN_CRMU,
+};
+
+void arm_smmu_create_identity_map(enum iommu_domain dom);
+void arm_smmu_reserve_secure_cntxt(void);
+void arm_smmu_enable_secure_client_port(void);
+
+#endif /* IOMMU_H */
diff --git a/plat/brcm/board/stingray/include/ncsi.h b/plat/brcm/board/stingray/include/ncsi.h
new file mode 100644
index 0000000..04dd640
--- /dev/null
+++ b/plat/brcm/board/stingray/include/ncsi.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef NCSI_H
+#define NCSI_H
+
+/*
+ * There are 10 registers for NCSI IO drivers.
+ */
+#define NITRO_NCSI_IOPAD_CONTROL_NUM 10
+#define NITRO_NCSI_IOPAD_CONTROL_BASE 0x60e05080
+
+/*
+ * NCSI IO Drive strength
+ * 000 - Drives 2mA
+ * 001 - Drives 4mA
+ * 010 - Drives 6mA
+ * 011 - Drives 8mA
+ * 100 - Drives 10mA
+ * 101 - Drives 12mA
+ * 110 - Drives 14mA
+ * 111 - Drives 16mA
+ */
+#define PAD_SELX_VALUE(selx) ((selx) << 1)
+#define PAD_SELX_MASK (0x7 << 1)
+
+void brcm_stingray_ncsi_init(void);
+
+#endif
diff --git a/plat/brcm/board/stingray/include/paxb.h b/plat/brcm/board/stingray/include/paxb.h
new file mode 100644
index 0000000..c64c8a6
--- /dev/null
+++ b/plat/brcm/board/stingray/include/paxb.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PAXB_H
+#define PAXB_H
+
+/* total number of PCIe cores */
+#define NUM_OF_SR_PCIE_CORES 8
+#define NUM_OF_NS3Z_PCIE_CORES 1
+
+/*
+ * List of PCIe core and PAXB wrapper memory power registers
+ */
+#define PCIE_CORE_BASE 0x40000800
+#define PCIE_CORE_SOFT_RST_CFG_BASE (PCIE_CORE_BASE + 0x40)
+#define PCIE_CORE_SOFT_RST 0x1
+#define PCIE_CORE_ISO_CFG_BASE (PCIE_CORE_BASE + 0x54)
+#define PCIE_CORE_MEM_ISO 0x2
+#define PCIE_CORE_ISO 0x1
+
+#define PCIE_CORE_MEM_PWR_BASE (PCIE_CORE_BASE + 0x58)
+#define PCIE_PAXB_MEM_PWR_BASE (PCIE_CORE_BASE + 0x5c)
+#define PCIE_CORE_PMI_CFG_BASE (PCIE_CORE_BASE + 0x64)
+#define PCIE_CORE_RESERVED_CFG (PCIE_CORE_BASE + 0x6c)
+#define PCIE_CORE_MEM_PWR_STATUS_BASE (PCIE_CORE_BASE + 0x74)
+#define PCIE_PAXB_MEM_PWR_STATUS_BASE (PCIE_CORE_BASE + 0x78)
+#define PCIE_CORE_PWR_OFFSET 0x100
+
+#define SR_A0_DEVICE_ID 0xd713
+#define SR_B0_DEVICE_ID 0xd714
+/* TODO: Modify device ID once available */
+#define NS3Z_DEVICE_ID 0xd715
+
+/* FIXME: change link speed to GEN3 when it's ready */
+#define GEN1_LINK_SPEED 1
+#define GEN2_LINK_SPEED 2
+#define GEN3_LINK_SPEED 3
+
+typedef struct {
+ uint32_t type;
+ uint32_t device_id;
+ uint32_t pipemux_idx;
+ uint32_t num_cores;
+ int (*pipemux_init)(void);
+ int (*phy_init)(void);
+ int (*core_needs_enable)(unsigned int core_idx);
+ unsigned int (*get_link_width)(unsigned int core_idx);
+ unsigned int (*get_link_speed)(void);
+} paxb_cfg;
+
+enum paxb_type {
+ PAXB_SR,
+ PAXB_NS3Z,
+};
+
+extern const paxb_cfg *paxb;
+
+#ifdef USE_PAXB
+void paxb_init(void);
+void paxb_rc_cfg_write(unsigned int core_idx, unsigned int where,
+ uint32_t val);
+unsigned int paxb_rc_cfg_read(unsigned int core_idx, unsigned int where);
+int pcie_core_needs_enable(unsigned int core_idx);
+const paxb_cfg *paxb_get_sr_config(void);
+#else
+static inline void paxb_init(void)
+{
+}
+#endif
+
+#endif /* PAXB_H */
diff --git a/plat/brcm/board/stingray/include/paxc.h b/plat/brcm/board/stingray/include/paxc.h
new file mode 100644
index 0000000..ae1af2e
--- /dev/null
+++ b/plat/brcm/board/stingray/include/paxc.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PAXC_H
+#define PAXC_H
+
+#ifdef USE_PAXC
+void paxc_init(void);
+void paxc_mhb_ns_init(void);
+#else
+static inline void paxc_init(void)
+{
+}
+
+static inline void paxc_mhb_ns_init(void)
+{
+}
+#endif
+
+#endif /* PAXC_H */
diff --git a/plat/brcm/board/stingray/include/plat_macros.S b/plat/brcm/board/stingray/include/plat_macros.S
new file mode 100644
index 0000000..dccd54a
--- /dev/null
+++ b/plat/brcm/board/stingray/include/plat_macros.S
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_MACROS_S
+#define PLAT_MACROS_S
+
+.section .rodata.gic_reg_name, "aS"
+gicc_regs:
+ .asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
+gicd_pend_reg:
+ .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n Offset:\t\t\tvalue\n"
+newline:
+ .asciz "\n"
+spacer:
+ .asciz ":\t\t0x"
+
+/* ---------------------------------------------
+ * The below required platform porting macro
+ * prints out relevant registers whenever an
+ * unhandled exception is taken in BL31.
+ * ---------------------------------------------
+ */
+.macro plat_crash_print_regs
+ nop
+.endm
+
+/* ---------------------------------------------
+ * The below macro prints out relevant GIC
+ * registers whenever an unhandled exception is
+ * taken in BL31.
+ * ---------------------------------------------
+ */
+.macro plat_print_gic_regs
+ nop
+ /*TBD-STINGRAY*/
+.endm
+
+/* ------------------------------------------------
+ * The below required platform porting macro prints
+ * out relevant interconnect registers whenever an
+ * unhandled exception is taken in BL3-1.
+ * ------------------------------------------------
+ */
+.macro plat_print_interconnect_regs
+ nop
+ /*TBD-STINGRAY*/
+.endm
+
+#endif /* PLAT_MACROS_S */
diff --git a/plat/brcm/board/stingray/include/platform_def.h b/plat/brcm/board/stingray/include/platform_def.h
new file mode 100644
index 0000000..4742124
--- /dev/null
+++ b/plat/brcm/board/stingray/include/platform_def.h
@@ -0,0 +1,268 @@
+/*
+ * Copyright (c) 2015-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <arch.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <plat/common/common_def.h>
+
+#include <brcm_def.h>
+#include "sr_def.h"
+#include <cmn_plat_def.h>
+
+/*
+ * Most platform porting definitions provided by included headers
+ */
+#define PLAT_BRCM_SCP_TZC_DRAM1_SIZE ULL(0x0)
+
+/*
+ * Required by standard platform porting definitions
+ */
+#define PLATFORM_CLUSTER0_CORE_COUNT 2
+#define PLATFORM_CLUSTER1_CORE_COUNT 2
+#define PLATFORM_CLUSTER2_CORE_COUNT 2
+#define PLATFORM_CLUSTER3_CORE_COUNT 2
+
+#define BRCM_SYSTEM_COUNT 1
+#define BRCM_CLUSTER_COUNT 4
+
+#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT + \
+ PLATFORM_CLUSTER1_CORE_COUNT+ \
+ PLATFORM_CLUSTER2_CORE_COUNT+ \
+ PLATFORM_CLUSTER3_CORE_COUNT)
+
+#define PLAT_NUM_PWR_DOMAINS (BRCM_SYSTEM_COUNT + \
+ BRCM_CLUSTER_COUNT + \
+ PLATFORM_CORE_COUNT)
+
+#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL2
+
+/* TBD-STINGRAY */
+#define CACHE_WRITEBACK_SHIFT 6
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
+
+/* TBD-STINGRAY */
+#define PLATFORM_MAX_AFFLVL MPIDR_AFFLVL1
+
+#define BL1_PLATFORM_STACK_SIZE 0x3300
+#define BL2_PLATFORM_STACK_SIZE 0xc000
+#define BL11_PLATFORM_STACK_SIZE 0x2b00
+#define DEFAULT_PLATFORM_STACK_SIZE 0x400
+#if IMAGE_BL1
+# define PLATFORM_STACK_SIZE BL1_PLATFORM_STACK_SIZE
+#else
+#if IMAGE_BL2
+#ifdef USE_BL1_RW
+# define PLATFORM_STACK_SIZE BL2_PLATFORM_STACK_SIZE
+#else
+# define PLATFORM_STACK_SIZE BL1_PLATFORM_STACK_SIZE
+#endif
+#else
+#if IMAGE_BL11
+# define PLATFORM_STACK_SIZE BL11_PLATFORM_STACK_SIZE
+#else
+# define PLATFORM_STACK_SIZE DEFAULT_PLATFORM_STACK_SIZE
+#endif
+#endif
+#endif
+
+#define PLAT_BRCM_TRUSTED_SRAM_BASE 0x66D00000
+#define PLAT_BRCM_TRUSTED_SRAM_SIZE 0x00040000
+
+#ifdef RUN_BL1_FROM_QSPI /* BL1 XIP from QSPI */
+# define PLAT_BRCM_TRUSTED_ROM_BASE QSPI_BASE_ADDR
+#elif RUN_BL1_FROM_NAND /* BL1 XIP from NAND */
+# define PLAT_BRCM_TRUSTED_ROM_BASE NAND_BASE_ADDR
+#else /* BL1 executed in ROM */
+# define PLAT_BRCM_TRUSTED_ROM_BASE ROM_BASE_ADDR
+#endif
+#define PLAT_BRCM_TRUSTED_ROM_SIZE 0x00040000
+
+/*******************************************************************************
+ * BL1 specific defines.
+ ******************************************************************************/
+#define BL1_RO_BASE PLAT_BRCM_TRUSTED_ROM_BASE
+#define BL1_RO_LIMIT (PLAT_BRCM_TRUSTED_ROM_BASE \
+ + PLAT_BRCM_TRUSTED_ROM_SIZE)
+
+/*
+ * Put BL1 RW at the beginning of the Trusted SRAM.
+ */
+#define BL1_RW_BASE (BRCM_BL_RAM_BASE)
+#define BL1_RW_LIMIT (BL1_RW_BASE + 0x12000)
+
+#define BL11_RW_BASE BL1_RW_LIMIT
+#define BL11_RW_LIMIT (PLAT_BRCM_TRUSTED_SRAM_BASE + \
+ PLAT_BRCM_TRUSTED_SRAM_SIZE)
+
+/*******************************************************************************
+ * BL2 specific defines.
+ ******************************************************************************/
+#if RUN_BL2_FROM_QSPI /* BL2 XIP from QSPI */
+#define BL2_BASE QSPI_BASE_ADDR
+#define BL2_LIMIT (BL2_BASE + 0x40000)
+#define BL2_RW_BASE BL1_RW_LIMIT
+#define BL2_RW_LIMIT (PLAT_BRCM_TRUSTED_SRAM_BASE + \
+ PLAT_BRCM_TRUSTED_SRAM_SIZE)
+#elif RUN_BL2_FROM_NAND /* BL2 XIP from NAND */
+#define BL2_BASE NAND_BASE_ADDR
+#define BL2_LIMIT (BL2_BASE + 0x40000)
+#define BL2_RW_BASE BL1_RW_LIMIT
+#define BL2_RW_LIMIT (PLAT_BRCM_TRUSTED_SRAM_BASE + \
+ PLAT_BRCM_TRUSTED_SRAM_SIZE)
+#else
+#define BL2_BASE (BL1_RW_LIMIT + PAGE_SIZE)
+#define BL2_LIMIT (BRCM_BL_RAM_BASE + BRCM_BL_RAM_SIZE)
+#endif
+
+/*
+ * BL1 persistent area in internal SRAM
+ * This area will increase as more features gets into BL1
+ */
+#define BL1_PERSISTENT_DATA_SIZE 0x2000
+
+/* To reduce BL2 runtime footprint, we can re-use some BL1_RW area */
+#define BL1_RW_RECLAIM_BASE (PLAT_BRCM_TRUSTED_SRAM_BASE + \
+ BL1_PERSISTENT_DATA_SIZE)
+
+/*******************************************************************************
+ * BL3-1 specific defines.
+ ******************************************************************************/
+/* Max Size of BL31 (in DRAM) */
+#define PLAT_BRCM_MAX_BL31_SIZE 0x30000
+
+#ifdef USE_DDR
+#define BL31_BASE BRCM_AP_TZC_DRAM1_BASE
+
+#define BL31_LIMIT (BRCM_AP_TZC_DRAM1_BASE + \
+ PLAT_BRCM_MAX_BL31_SIZE)
+#else
+/* Put BL3-1 at the end of external on-board SRAM connected as NOR flash */
+#define BL31_BASE (NOR_BASE_ADDR + NOR_SIZE - \
+ PLAT_BRCM_MAX_BL31_SIZE)
+
+#define BL31_LIMIT (NOR_BASE_ADDR + NOR_SIZE)
+#endif
+
+#define SECURE_DDR_END_ADDRESS BL31_LIMIT
+
+#ifdef NEED_SCP_BL2
+#define SCP_BL2_BASE BL31_BASE
+#define PLAT_MAX_SCP_BL2_SIZE 0x9000
+#define PLAT_SCP_COM_SHARED_MEM_BASE (CRMU_SHARED_SRAM_BASE)
+/* dummy defined */
+#define PLAT_BRCM_MHU_BASE 0x0
+#endif
+
+#define SECONDARY_CPU_SPIN_BASE_ADDR BRCM_SHARED_RAM_BASE
+
+/* Generic system timer counter frequency */
+#ifndef SYSCNT_FREQ
+#define SYSCNT_FREQ (125 * 1000 * 1000)
+#endif
+
+/*
+ * Enable the BL32 definitions, only when optee os is selected as secure
+ * payload (BL32).
+ */
+#ifdef SPD_opteed
+/*
+ * Reserved Memory Map : SHMEM & TZDRAM.
+ *
+ * +--------+----------+ 0x8D000000
+ * | SHMEM (NS) | 16MB
+ * +-------------------+ 0x8E000000
+ * | | TEE_RAM(S)| 4MB
+ * + TZDRAM +----------+ 0x8E400000
+ * | | TA_RAM(S) | 12MB
+ * +-------------------+ 0x8F000000
+ * | BL31 Binary (S) | 192KB
+ * +-------------------+ 0x8F030000
+ */
+
+#define BL32_VA_SIZE (4 * 1024 * 1024)
+#define BL32_BASE (0x8E000000)
+#define BL32_LIMIT (BL32_BASE + BL32_VA_SIZE)
+#define TSP_SEC_MEM_BASE BL32_BASE
+#define TSP_SEC_MEM_SIZE BL32_VA_SIZE
+#endif
+
+#ifdef SPD_opteed
+ #define SECURE_DDR_BASE_ADDRESS BL32_BASE
+#else
+ #define SECURE_DDR_BASE_ADDRESS BL31_BASE
+#endif
+/*******************************************************************************
+ * Platform specific page table and MMU setup constants
+ ******************************************************************************/
+
+#define MAX_XLAT_TABLES 7
+
+#define PLAT_BRCM_MMAP_ENTRIES 10
+
+#define MAX_MMAP_REGIONS (PLAT_BRCM_MMAP_ENTRIES + \
+ BRCM_BL_REGIONS)
+
+#ifdef USE_DDR
+#ifdef BL33_OVERRIDE_LOAD_ADDR
+#define PLAT_BRCM_NS_IMAGE_OFFSET BL33_OVERRIDE_LOAD_ADDR
+#else
+/*
+ * BL3-3 image starting offset.
+ * Putting start of DRAM as of now.
+ */
+#define PLAT_BRCM_NS_IMAGE_OFFSET 0x80000000
+#endif /* BL33_OVERRIDE_LOAD_ADDR */
+#else
+/*
+ * BL3-3 image starting offset.
+ * Putting start of external on-board SRAM as of now.
+ */
+#define PLAT_BRCM_NS_IMAGE_OFFSET NOR_BASE_ADDR
+#endif /* USE_DDR */
+/******************************************************************************
+ * Required platform porting definitions common to all BRCM platforms
+ *****************************************************************************/
+
+#define MAX_IO_DEVICES 5
+#define MAX_IO_HANDLES 6
+
+#define PRIMARY_CPU 0
+
+/* GIC Parameter */
+#define PLAT_BRCM_GICD_BASE GIC500_BASE
+#define PLAT_BRCM_GICR_BASE (GIC500_BASE + 0x200000)
+
+/* Define secure interrupt as per Group here */
+#define PLAT_BRCM_G1S_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+ GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SPI_0, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+ GIC_INTR_CFG_EDGE)
+
+#define PLAT_BRCM_G0_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_0, PLAT_SDEI_NORMAL_PRI, (grp), \
+ GIC_INTR_CFG_EDGE), \
+
+/*
+ *CCN 502 related constants.
+ */
+#define PLAT_BRCM_CLUSTER_COUNT 4 /* Number of RN-F Masters */
+#define PLAT_BRCM_CLUSTER_TO_CCN_ID_MAP CLUSTER0_NODE_ID, CLUSTER1_NODE_ID, CLUSTER2_NODE_ID, CLUSTER3_NODE_ID
+#define CCN_SIZE 0x1000000
+#define CLUSTER0_NODE_ID 1
+#define CLUSTER1_NODE_ID 7
+#define CLUSTER2_NODE_ID 9
+#define CLUSTER3_NODE_ID 15
+
+#endif
diff --git a/plat/brcm/board/stingray/include/platform_sotp.h b/plat/brcm/board/stingray/include/platform_sotp.h
new file mode 100644
index 0000000..0389f38
--- /dev/null
+++ b/plat/brcm/board/stingray/include/platform_sotp.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2016-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_SOTP_H
+#define PLATFORM_SOTP_H
+
+#define SOTP_DEVICE_SECURE_CFG0_ROW 17
+#define SOTP_DEVICE_SECURE_CFG1_ROW 18
+#define SOTP_DEVICE_SECURE_CFG2_ROW 19
+#define SOTP_DEVICE_SECURE_CFG3_ROW 20
+#define SOTP_BRCM_SOFTWARE_CFG0_ROW 21
+#define SOTP_BRCM_SOFTWARE_CFG1_ROW 22
+#define SOTP_BRCM_SOFTWARE_CFG2_ROW 23
+#define SOTP_BRCM_SOFTWARE_CFG3_ROW 24
+#define SOTP_CUSTOMER_ID_CFG0_ROW 25
+#define SOTP_CUSTOMER_ID_CFG1_ROW 26
+#define SOTP_CUSTOMER_ID_CFG2_ROW 27
+#define SOTP_CUSTOMER_ID_CFG3_ROW 28
+#define SOTP_CUSTOMER_DEV_CFG0_ROW 29
+#define SOTP_CUSTOMER_DEV_CFG1_ROW 30
+#define SOTP_CUSTOMER_DEV_CFG2_ROW 31
+#define SOTP_CUSTOMER_DEV_CFG3_ROW 32
+#define SOTP_DAUTH_ROW 33
+#define SOTP_K_HMAC_ROW 45
+#define SOTP_K_AES_ROW 57
+#define SOTP_NVCOUNTER_ROW 69
+
+#define SOTP_BRCM_CFG_ECC_ERROR_MASK 0x100000
+#define SOTP_DAUTH_ECC_ERROR_MASK 0x800000
+#define SOTP_K_HMAC_ECC_ERROR_MASK 0x1000000
+#define SOTP_K_AES_ECC_ERROR_MASK 0x2000000
+
+#endif
diff --git a/plat/brcm/board/stingray/include/platform_usb.h b/plat/brcm/board/stingray/include/platform_usb.h
new file mode 100644
index 0000000..5b5309f
--- /dev/null
+++ b/plat/brcm/board/stingray/include/platform_usb.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2019 - 2021, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_USB_H
+#define PLATFORM_USB_H
+
+#include <platform_def.h>
+
+#define USB3_DRD BIT(0U)
+#define USB3H_USB2DRD BIT(1U)
+
+extern const unsigned int xhc_portsc_reg_offset[MAX_USB_PORTS];
+
+void xhci_phy_init(void);
+
+#endif /* PLATFORM_USB_H */
diff --git a/plat/brcm/board/stingray/include/scp_cmd.h b/plat/brcm/board/stingray/include/scp_cmd.h
new file mode 100644
index 0000000..806ef56
--- /dev/null
+++ b/plat/brcm/board/stingray/include/scp_cmd.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2017-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SCP_CMD_H
+#define SCP_SMD_H
+
+#include <stdint.h>
+
+typedef struct {
+ int cmd;
+ int completed;
+ int ret;
+} crmu_response_t;
+
+
+#define SCP_CMD_MASK 0xffff
+#define SCP_CMD_DEFAULT_TIMEOUT_US 1000
+#define SCP_CMD_SCP_BOOT_TIMEOUT_US 5000
+
+int scp_send_cmd(uint32_t cmd, uint32_t param, uint32_t timeout);
+
+#endif
diff --git a/plat/brcm/board/stingray/include/scp_utils.h b/plat/brcm/board/stingray/include/scp_utils.h
new file mode 100644
index 0000000..c39b18c
--- /dev/null
+++ b/plat/brcm/board/stingray/include/scp_utils.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SCP_UTILS_H
+#define SCP_UTILS_H
+
+#include <common/bl_common.h>
+#include <lib/mmio.h>
+
+#include <m0_cfg.h>
+
+int plat_bcm_bl2_plat_handle_scp_bl2(image_info_t *scp_bl2_image_info);
+
+bool is_crmu_alive(void);
+bool bcm_scp_issue_sys_reset(void);
+
+#define SCP_READ_CFG(cfg) mmio_read_32(CRMU_CFG_BASE + \
+ offsetof(M0CFG, cfg))
+#define SCP_WRITE_CFG(cfg, value) mmio_write_32(CRMU_CFG_BASE + \
+ offsetof(M0CFG, cfg), value)
+
+#define SCP_READ_CFG16(cfg) mmio_read_16(CRMU_CFG_BASE + \
+ offsetof(M0CFG, cfg))
+#define SCP_WRITE_CFG16(cfg, value) mmio_write_16(CRMU_CFG_BASE + \
+ offsetof(M0CFG, cfg), value)
+
+#define SCP_READ_CFG8(cfg) mmio_read_8(CRMU_CFG_BASE + \
+ offsetof(M0CFG, cfg))
+#define SCP_WRITE_CFG8(cfg, value) mmio_write_8(CRMU_CFG_BASE + \
+ offsetof(M0CFG, cfg), value)
+#endif
diff --git a/plat/brcm/board/stingray/include/sdio.h b/plat/brcm/board/stingray/include/sdio.h
new file mode 100644
index 0000000..e08904e
--- /dev/null
+++ b/plat/brcm/board/stingray/include/sdio.h
@@ -0,0 +1,247 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SDIO_H
+#define SDIO_H
+
+#include <stdbool.h>
+
+#define SR_IPROC_SDIO0_CFG_BASE 0x689006e4
+#define SR_IPROC_SDIO0_SID_BASE 0x68900b00
+#define SR_IPROC_SDIO0_PAD_BASE 0x68a4017c
+#define SR_IPROC_SDIO0_IOCTRL_BASE 0x68e02408
+
+#define SR_IPROC_SDIO1_CFG_BASE 0x68900734
+#define SR_IPROC_SDIO1_SID_BASE 0x68900b08
+#define SR_IPROC_SDIO1_PAD_BASE 0x68a401b4
+#define SR_IPROC_SDIO1_IOCTRL_BASE 0x68e03408
+
+#define NS3Z_IPROC_SDIO0_CFG_BASE 0x68a20540
+#define NS3Z_IPROC_SDIO0_SID_BASE 0x68900b00
+#define NS3Z_IPROC_SDIO0_TP_OUT_SEL 0x68a20308
+#define NS3Z_IPROC_SDIO0_PAD_BASE 0x68a20500
+#define NS3Z_IPROC_SDIO0_IOCTRL_BASE 0x68e02408
+
+#define PHY_BYPASS BIT(14)
+#define LEGACY_EN BIT(31)
+#define PHY_DISABLE (LEGACY_EN | PHY_BYPASS)
+
+#define NS3Z_IPROC_SDIO1_CFG_BASE 0x68a30540
+#define NS3Z_IPROC_SDIO1_SID_BASE 0x68900b08
+#define NS3Z_IPROC_SDIO1_PAD_BASE 0x68a30500
+#define NS3Z_IPROC_SDIO1_IOCTRL_BASE 0x68e03408
+
+#define ICFG_SDIO_CAP0 0x10
+#define ICFG_SDIO_CAP1 0x14
+#define ICFG_SDIO_STRAPSTATUS_0 0x0
+#define ICFG_SDIO_STRAPSTATUS_1 0x4
+#define ICFG_SDIO_STRAPSTATUS_2 0x8
+#define ICFG_SDIO_STRAPSTATUS_3 0xc
+#define ICFG_SDIO_STRAPSTATUS_4 0x18
+
+#define ICFG_SDIO_SID_ARADDR 0x0
+#define ICFG_SDIO_SID_AWADDR 0x4
+
+#define ICFG_SDIOx_CAP0__SLOT_TYPE_MASK 0x3
+#define ICFG_SDIOx_CAP0__SLOT_TYPE_SHIFT 27
+#define ICFG_SDIOx_CAP0__INT_MODE_SHIFT 26
+#define ICFG_SDIOx_CAP0__SYS_BUS_64BIT_SHIFT 25
+#define ICFG_SDIOx_CAP0__VOLTAGE_1P8V_SHIFT 24
+#define ICFG_SDIOx_CAP0__VOLTAGE_3P0V_SHIFT 23
+#define ICFG_SDIOx_CAP0__VOLTAGE_3P3V_SHIFT 22
+#define ICFG_SDIOx_CAP0__SUSPEND_RESUME_SHIFT 21
+#define ICFG_SDIOx_CAP0__SDMA_SHIFT 20
+#define ICFG_SDIOx_CAP0__HIGH_SPEED_SHIFT 19
+#define ICFG_SDIOx_CAP0__ADMA2_SHIFT 18
+#define ICFG_SDIOx_CAP0__EXTENDED_MEDIA_SHIFT 17
+#define ICFG_SDIOx_CAP0__MAX_BLOCK_LEN_MASK 0x3
+#define ICFG_SDIOx_CAP0__MAX_BLOCK_LEN_SHIFT 15
+#define ICFG_SDIOx_CAP0__BASE_CLK_FREQ_MASK 0xff
+#define ICFG_SDIOx_CAP0__BASE_CLK_FREQ_SHIFT 7
+#define ICFG_SDIOx_CAP0__TIMEOUT_UNIT_SHIFT 6
+#define ICFG_SDIOx_CAP0__TIMEOUT_CLK_FREQ_MASK 0x3f
+#define ICFG_SDIOx_CAP0__TIMEOUT_CLK_FREQ_SHIFT 0
+
+#define ICFG_SDIOx_CAP1__SPI_BLOCK_MODE_SHIFT 22
+#define ICFG_SDIOx_CAP1__SPI_MODE_SHIFT 21
+#define ICFG_SDIOx_CAP1__CLK_MULT_MASK 0xff
+#define ICFG_SDIOx_CAP1__CLK_MULT_SHIFT 13
+#define ICFG_SDIOx_CAP1__RETUNING_MODE_MASK 0x3
+#define ICFG_SDIOx_CAP1__RETUNING_MODE_SHIFT 11
+#define ICFG_SDIOx_CAP1__TUNE_SDR50_SHIFT 10
+#define ICFG_SDIOx_CAP1__TIME_RETUNE_MASK 0xf
+#define ICFG_SDIOx_CAP1__TIME_RETUNE_SHIFT 6
+#define ICFG_SDIOx_CAP1__DRIVER_D_SHIFT 5
+#define ICFG_SDIOx_CAP1__DRIVER_C_SHIFT 4
+#define ICFG_SDIOx_CAP1__DRIVER_A_SHIFT 3
+#define ICFG_SDIOx_CAP1__DDR50_SHIFT 2
+#define ICFG_SDIOx_CAP1__SDR104_SHIFT 1
+#define ICFG_SDIOx_CAP1__SDR50_SHIFT 0
+
+#ifdef USE_DDR
+#define SDIO_DMA 1
+#else
+#define SDIO_DMA 0
+#endif
+
+#define SDIO0_CAP0_CFG \
+ (0x1 << ICFG_SDIOx_CAP0__SLOT_TYPE_SHIFT) \
+ | (0x0 << ICFG_SDIOx_CAP0__INT_MODE_SHIFT) \
+ | (0x0 << ICFG_SDIOx_CAP0__SYS_BUS_64BIT_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__VOLTAGE_1P8V_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__VOLTAGE_3P0V_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__VOLTAGE_3P3V_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__SUSPEND_RESUME_SHIFT) \
+ | (SDIO_DMA << ICFG_SDIOx_CAP0__SDMA_SHIFT) \
+ | (SDIO_DMA << ICFG_SDIOx_CAP0__ADMA2_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__HIGH_SPEED_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__EXTENDED_MEDIA_SHIFT) \
+ | (0x2 << ICFG_SDIOx_CAP0__MAX_BLOCK_LEN_SHIFT) \
+ | (0xc8 << ICFG_SDIOx_CAP0__BASE_CLK_FREQ_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__TIMEOUT_UNIT_SHIFT) \
+ | (0x30 << ICFG_SDIOx_CAP0__TIMEOUT_CLK_FREQ_SHIFT)
+
+#define SDIO0_CAP1_CFG \
+ (0x1 << ICFG_SDIOx_CAP1__SPI_BLOCK_MODE_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__SPI_MODE_SHIFT)\
+ | (0x0 << ICFG_SDIOx_CAP1__CLK_MULT_SHIFT)\
+ | (0x2 << ICFG_SDIOx_CAP1__RETUNING_MODE_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__TUNE_SDR50_SHIFT)\
+ | (0x0 << ICFG_SDIOx_CAP1__DRIVER_D_SHIFT)\
+ | (0x0 << ICFG_SDIOx_CAP1__DRIVER_C_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__DRIVER_A_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__DDR50_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__SDR104_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__SDR50_SHIFT)
+
+#define SDIO1_CAP0_CFG \
+ (0x0 << ICFG_SDIOx_CAP0__SLOT_TYPE_SHIFT) \
+ | (0x0 << ICFG_SDIOx_CAP0__INT_MODE_SHIFT) \
+ | (0x0 << ICFG_SDIOx_CAP0__SYS_BUS_64BIT_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__VOLTAGE_1P8V_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__VOLTAGE_3P0V_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__VOLTAGE_3P3V_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__SUSPEND_RESUME_SHIFT) \
+ | (SDIO_DMA << ICFG_SDIOx_CAP0__SDMA_SHIFT) \
+ | (SDIO_DMA << ICFG_SDIOx_CAP0__ADMA2_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__HIGH_SPEED_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__EXTENDED_MEDIA_SHIFT) \
+ | (0x2 << ICFG_SDIOx_CAP0__MAX_BLOCK_LEN_SHIFT) \
+ | (0xc8 << ICFG_SDIOx_CAP0__BASE_CLK_FREQ_SHIFT) \
+ | (0x1 << ICFG_SDIOx_CAP0__TIMEOUT_UNIT_SHIFT) \
+ | (0x30 << ICFG_SDIOx_CAP0__TIMEOUT_CLK_FREQ_SHIFT)
+
+#define SDIO1_CAP1_CFG \
+ (0x1 << ICFG_SDIOx_CAP1__SPI_BLOCK_MODE_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__SPI_MODE_SHIFT)\
+ | (0x0 << ICFG_SDIOx_CAP1__CLK_MULT_SHIFT)\
+ | (0x2 << ICFG_SDIOx_CAP1__RETUNING_MODE_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__TUNE_SDR50_SHIFT)\
+ | (0x0 << ICFG_SDIOx_CAP1__DRIVER_D_SHIFT)\
+ | (0x0 << ICFG_SDIOx_CAP1__DRIVER_C_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__DRIVER_A_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__DDR50_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__SDR104_SHIFT)\
+ | (0x1 << ICFG_SDIOx_CAP1__SDR50_SHIFT)
+
+#define PAD_SDIO_CLK 0x4
+#define PAD_SDIO_DATA0 0x8
+#define PAD_SDIO_DATA1 0xc
+#define PAD_SDIO_DATA2 0x10
+#define PAD_SDIO_DATA3 0x14
+#define PAD_SDIO_DATA4 0x18
+#define PAD_SDIO_DATA5 0x1c
+#define PAD_SDIO_DATA6 0x20
+#define PAD_SDIO_DATA7 0x24
+#define PAD_SDIO_CMD 0x28
+
+/* 12mA Drive strength*/
+#define PAD_SDIO_SELX (0x5 << 1)
+#define PAD_SDIO_SRC (1 << 0)
+#define PAD_SDIO_MASK (0xF << 0)
+#define PAD_SDIO_VALUE (PAD_SDIO_SELX | PAD_SDIO_SRC)
+
+/*
+ * SDIO_PRESETVAL0
+ *
+ * Each 13 Bit filed consists:
+ * drivestrength - 12:11
+ * clkgensel - b10
+ * sdkclkfreqsel - 9:0
+ * Field Bit(s) Description
+ * ============================================================
+ * SDR25_PRESET 25:13 Preset Value for SDR25
+ * SDR50_PRESET 12:0 Preset Value for SDR50
+ */
+#define SDIO_PRESETVAL0 0x01005001
+
+/*
+ * SDIO_PRESETVAL1
+ *
+ * Each 13 Bit filed consists:
+ * drivestrength - 12:11
+ * clkgensel - b10
+ * sdkclkfreqsel - 9:0
+ * Field Bit(s) Description
+ * ============================================================
+ * SDR104_PRESET 25:13 Preset Value for SDR104
+ * SDR12_PRESET 12:0 Preset Value for SDR12
+ */
+#define SDIO_PRESETVAL1 0x03000004
+
+/*
+ * SDIO_PRESETVAL2
+ *
+ * Each 13 Bit filed consists:
+ * drivestrength - 12:11
+ * clkgensel - b10
+ * sdkclkfreqsel - 9:0
+ * Field Bit(s) Description
+ * ============================================================
+ * HIGH_SPEED_PRESET 25:13 Preset Value for High Speed
+ * INIT_PRESET 12:0 Preset Value for Initialization
+ */
+#define SDIO_PRESETVAL2 0x010040FA
+
+/*
+ * SDIO_PRESETVAL3
+ *
+ * Each 13 Bit filed consists:
+ * drivestrength - 12:11
+ * clkgensel - b10
+ * sdkclkfreqsel - 9:0
+ * Field Bit(s) Description
+ * ============================================================
+ * DDR50_PRESET 25:13 Preset Value for DDR50
+ * DEFAULT_PRESET 12:0 Preset Value for Default Speed
+ */
+#define SDIO_PRESETVAL3 0x01004004
+
+/*
+ * SDIO_PRESETVAL4
+ *
+ * Field Bit(s) Description
+ * ============================================================
+ * FORCE_USE_IP_TUNE_CLK 30 Force use IP clock
+ * TUNING_COUNT 29:24 Tuning count
+ * OVERRIDE_1P8V 23:16
+ * OVERRIDE_3P3V 15:8
+ * OVERRIDE_3P0V 7:0
+ */
+#define SDIO_PRESETVAL4 0x20010101
+
+#define SDIO_SID_SHIFT 5
+
+typedef struct {
+ uintptr_t cfg_base;
+ uintptr_t sid_base;
+ uintptr_t io_ctrl_base;
+ uintptr_t pad_base;
+} SDIO_CFG;
+
+void brcm_stingray_sdio_init(void);
+
+#endif /* SDIO_H */
diff --git a/plat/brcm/board/stingray/include/sr_def.h b/plat/brcm/board/stingray/include/sr_def.h
new file mode 100644
index 0000000..277836e
--- /dev/null
+++ b/plat/brcm/board/stingray/include/sr_def.h
@@ -0,0 +1,624 @@
+/*
+ * Copyright (c) 2016-2021, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SR_DEF_H
+#define SR_DEF_H
+
+#ifndef __ASSEMBLER__
+#include <lib/mmio.h>
+#endif
+
+#include <common/interrupt_props.h>
+#include <drivers/arm/gic_common.h>
+
+#include <crmu_def.h>
+
+/* Special value used to verify platform parameters from BL2 to BL3-1 */
+#define BRCM_BL31_PLAT_PARAM_VAL ULL(0x0f1e2d3c4b5a6978)
+
+#define MHB_BASE_ADDR 0x60000000
+#define PLAT_BRCM_CCN_BASE 0x61000000
+#define CORESIGHT_BASE_ADDR 0x62000000
+#define SMMU_BASE 0x64000000
+
+/* memory map entries*/
+/* Grouping block device for bigger MMU region */
+/* covers MHB, CNN, coresight, GIC, MMU, APB, CRMU */
+#define PERIPH0_BASE MHB_BASE_ADDR
+#define PERIPH0_SIZE 0x06d00000
+
+#define PERIPH1_BASE 0x66d80000
+#define PERIPH1_SIZE 0x00f80000
+
+#define HSLS_BASE_ADDR 0x68900000
+#define HSLS_SIZE 0x04500000
+
+#define GIC500_BASE 0x63c00000
+#define GIC500_SIZE 0x400000
+
+/*******************************************************************************
+ * CCN related constants
+ ******************************************************************************/
+#define OLY_MN_REGISTERS_NODE0_SECURE_ACCESS (PLAT_BRCM_CCN_BASE + 0x0)
+
+#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x880500)
+
+/* Used for acceleration of coherent ordered writes */
+#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WUO BIT(4)
+/* Wait for completion of requests at RN-I */
+#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WFC BIT(3)
+
+/*
+ * Forces all reads from the RN-I to be sent with the request order bit set
+ * and this ensures ordered allocation of read data buffers in the RN-I
+ */
+#define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_RQO BIT(5)
+
+#define OLY_RNI3PDVM_REGISTERS_NODE14_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x8e0500)
+
+/* Wait for completion of requests at RN-I */
+#define OLY_RNI3PDVM_REGISTERS_NODE14_AUX_CTL_WFC BIT(3)
+
+#define OLY_HNI_REGISTERS_NODE0_POS_CONTROL (PLAT_BRCM_CCN_BASE + 0x80000)
+#define POS_CONTROL_HNI_POS_EN BIT(0)
+
+#define OLY_HNI_REGISTERS_NODE0_PCIERC_RNI_NODEID_LIST \
+ (PLAT_BRCM_CCN_BASE + 0x80008)
+/* PAXB and PAXC connected to 8th Node */
+#define SR_RNI_PCIE_CONNECTED BIT(8)
+/* PAXB connected to 6th Node */
+#define SRP_RNI_PCIE_CONNECTED BIT(6)
+
+#define OLY_HNI_REGISTERS_NODE0_SA_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x80500)
+#define SA_AUX_CTL_POS_EARLY_WR_COMP_EN BIT(5)
+#define SA_AUX_CTL_SER_DEVNE_WR BIT(9)
+
+/*******************************************************************************
+ * Coresight related constants
+ ******************************************************************************/
+#define CORESIGHT_BASE_ADDR 0x62000000
+
+#define IHOST0_BASE 0x66000000
+#define IHOST_ADDR_SPACE 0x2000
+
+/*******************************************************************************
+ * SCR related constants
+ ******************************************************************************/
+#define SCR_BASE 0x6600a000
+#define SCR_ARCACHE_OFFSET 4
+#define SCR_ARCACHE_MASK (0x3 << SCR_ARCACHE_OFFSET)
+#define SCR_AWCACHE_OFFSET 6
+#define SCR_AWCACHE_MASK (0x3 << SCR_AWCACHE_OFFSET)
+#define SCR_AXCACHE_CONFIG_MASK (SCR_ARCACHE_MASK | SCR_AWCACHE_MASK)
+#define SCR_TBUX_AXCACHE_CONFIG ((0x1 << SCR_AWCACHE_OFFSET) | \
+ (0x1 << SCR_ARCACHE_OFFSET))
+
+#define SCR_REGS_SCR_SOFT_RESET (SCR_BASE + 0x1c)
+#define SCR_REGS_GIC_SOFT_RESET BIT(0)
+
+#define SCR_GPV_BASE 0x66100000
+#define SCR_NOC_SECURITY0 (SCR_GPV_BASE + 0x08)
+#define SCR_NOC_DDR_REGISTER_ACCESS (SCR_GPV_BASE + 0x30)
+
+/*******************************************************************************
+ * MEMC and DDR related constants
+ ******************************************************************************/
+#define DDR0_CONTROL_ROOT 0x66200000
+#define EMEM_SS_CFG_0_ROOT 0x66202000
+#define EMEM_SYS_IF_0_ROOT 0x66204000
+#define DDR_PHY0_ROOT 0x66240000
+
+#define DDR1_CONTROL_ROOT 0x66280000
+#define EMEM_SS_CFG_1_ROOT 0x66282000
+#define EMEM_SYS_IF_1_ROOT 0x66284000
+#define DDR_PHY1_ROOT 0x662c0000
+
+#define DDR2_CONTROL_ROOT 0x66300000
+#define EMEM_SS_CFG_2_ROOT 0x66302000
+#define EMEM_SYS_IF_2_ROOT 0x66304000
+#define DDR_PHY2_ROOT 0x66340000
+
+/*******************************************************************************
+ * TZC400 related constants
+ ******************************************************************************/
+#define TZC_400_BASE 0x66d84000
+
+/*******************************************************************************
+ * FS4 related constants
+ ******************************************************************************/
+#define FS4_SRAM_IDM_IO_CONTROL_DIRECT 0x66d8a408
+
+#define FS4_CRYPTO_IDM_IO_CONTROL_DIRECT 0x66d8e408
+#define FS4_CRYPTO_IDM_RESET_CONTROL 0x66d8e800
+#define FS4_CRYPTO_BASE 0x67000000
+#define FS4_CRYPTO_DME_BASE (FS4_CRYPTO_BASE + 0x280000)
+
+#define FS4_RAID_IDM_IO_CONTROL_DIRECT 0x66d8f408
+#define FS4_RAID_IDM_IO_STATUS 0x66d8f500
+#define FS4_RAID_IDM_RESET_CONTROL 0x66d8f800
+#define FS4_RAID_BASE 0x67400000
+#define FS4_RAID_DME_BASE (FS4_RAID_BASE + 0x280000)
+
+#define FS4_CRYPTO_GPV_BASE 0x67300000
+#define FS4_RAID_GPV_BASE 0x67700000
+
+#define FS6_PKI_BASE 0x67400000
+#define FS6_PKI_DME_BASE 0x66D90000
+
+#define TZC400_FS_SRAM_ROOT 0x66d84000
+#define GATE_KEEPER_OFFSET 0x8
+#define REGION_ATTRIBUTES_0_OFFSET 0x110
+#define REGION_ID_ACCESS_0_OFFSET 0x114
+
+#define NIC400_FS_NOC_ROOT 0x66e00000
+#define NIC400_FS_NOC_SECURITY2_OFFSET 0x10
+#define NIC400_FS_NOC_SECURITY4_OFFSET 0x18
+#define NIC400_FS_NOC_SECURITY7_OFFSET 0x24
+
+/*******************************************************************************
+ * SATA PHY related constants
+ ******************************************************************************/
+#define SATA_BASE 0x67d00000
+
+/*******************************************************************************
+ * USB related constants
+ ******************************************************************************/
+#define USB_BASE 0x68500000
+#define USB_SIZE 0x00400000
+#define XHC_BASE (USB_BASE + 0x11000)
+#define MAX_USB_PORTS 3
+
+/*******************************************************************************
+ * HSLS related constants
+ ******************************************************************************/
+#define IPROC_ROOT 0x68900000
+#define HSLS_ICFG_REGS_BASE IPROC_ROOT
+#define HSLS_IDM_REGS_BASE 0x68e00000
+#define HSLS_MODE_SEL_CONTROL 0x68a40000
+#define HSLS_TZPC_BASE 0x68b40000
+#define HSLS_GPV_BASE 0x6cd00000
+
+/*******************************************************************************
+ * Chip ID related constants
+ ******************************************************************************/
+#define ICFG_CHIP_ID HSLS_ICFG_REGS_BASE
+#define CHIP_ID_SR 0xd730
+#define CHIP_ID_NS3Z 0xe56d
+#define CHIP_ID_MASK 0xf000
+#define ICFG_CHIP_REVISION_ID (HSLS_ICFG_REGS_BASE + 0x4)
+#define PLAT_CHIP_ID_GET (mmio_read_32(ICFG_CHIP_ID))
+#define PLAT_CHIP_REV_GET (mmio_read_32(ICFG_CHIP_REVISION_ID))
+
+/*******************************************************************************
+ * CMIC MII (MDIO) related constant
+ ******************************************************************************/
+#define PLAT_CMIC_MIIM_BASE 0x68920000U
+
+/*******************************************************************************
+ * Timers related constants
+ ******************************************************************************/
+/* ChipcommonG_tim0_TIM_TIMER1Load 0x68930000 */
+#define SP804_TIMER0_BASE 0x68930000
+#define SP804_TIMER1_BASE 0x68940000
+#define SP804_TIMER0_TIMER_VAL_REG_OFFSET 0x4
+#define SP804_TIMER0_CLKMULT 2
+#define SP804_TIMER0_CLKDIV 25
+
+/*******************************************************************************
+ * GPIO related constants
+ ******************************************************************************/
+#define IPROC_GPIO_NS_BASE 0x689d0000
+#define IPROC_GPIO_S_BASE 0x68b00000
+#define IPROC_GPIO_NR 151
+#define GPIO_S_CNTRL_REG 0x68b60000
+
+/*******************************************************************************
+ * I2C SMBUS related constants
+ ******************************************************************************/
+#define SMBUS0_REGS_BASE 0x689b0000
+#define SMBUS1_REGS_BASE 0x689e0000
+
+/*******************************************************************************
+ * UART related constants
+ ******************************************************************************/
+#define ChipcommonG_UART0_UART_RBR_THR_DLL 0x68a00000
+#define ChipcommonG_UART1_UART_RBR_THR_DLL 0x68a10000
+#define ChipcommonG_UART2_UART_RBR_THR_DLL 0x68a20000
+#define ChipcommonG_UART3_UART_RBR_THR_DLL 0x68a30000
+
+#define UART0_BASE_ADDR ChipcommonG_UART0_UART_RBR_THR_DLL
+#define UART1_BASE_ADDR ChipcommonG_UART1_UART_RBR_THR_DLL
+#define UART2_BASE_ADDR ChipcommonG_UART2_UART_RBR_THR_DLL
+#define UART3_BASE_ADDR ChipcommonG_UART3_UART_RBR_THR_DLL
+
+#define UART_SPR_OFFSET 0x1c /* Scratch Pad Register */
+
+#define LOG_LEVEL_REGISTER CRMU_SPARE_REG_3
+#define GET_LOG_LEVEL() (mmio_read_32(LOG_LEVEL_REGISTER))
+#define SET_LOG_LEVEL(x) (mmio_write_32(LOG_LEVEL_REGISTER, x))
+
+#define IO_RETRY_REGISTER CRMU_SPARE_REG_4
+
+#define DWC_UART_REFCLK (25 * 1000 * 1000)
+#define DWC_UART_REFCLK_DIV 16
+/* Baud rate in emulation will vary based on setting of 25MHz SCLK */
+#define DWC_UART_BAUDRATE 115200
+
+#define BRCM_CRASH_CONSOLE_BASE UART1_BASE_ADDR
+#define BRCM_CRASH_CONSOLE_REFCLK DWC_UART_REFCLK
+#define BRCM_CRASH_CONSOLE_BAUDRATE DWC_UART_BAUDRATE
+
+#ifdef BOARD_CONSOLE_UART
+#define PLAT_BRCM_BOOT_UART_BASE BOARD_CONSOLE_UART
+#else
+#define PLAT_BRCM_BOOT_UART_BASE UART1_BASE_ADDR
+#endif
+#define CONSOLE_UART_ID ((PLAT_BRCM_BOOT_UART_BASE >> 16) & 0x3)
+
+#define PLAT_BRCM_BOOT_UART_CLK_IN_HZ DWC_UART_REFCLK
+#define BRCM_CONSOLE_BAUDRATE DWC_UART_BAUDRATE
+
+#define PLAT_BRCM_BL31_RUN_UART_BASE PLAT_BRCM_BOOT_UART_BASE
+#define PLAT_BRCM_BL31_RUN_UART_CLK_IN_HZ PLAT_BRCM_BOOT_UART_CLK_IN_HZ
+
+/*******************************************************************************
+ * IOMUX related constants
+ ******************************************************************************/
+#define HSLS_IOPAD_BASE HSLS_MODE_SEL_CONTROL
+#define MODE_SEL_CONTROL_FSEL_MASK 0x7
+#define MODE_SEL_CONTROL_FSEL_MODE0 0x0
+#define MODE_SEL_CONTROL_FSEL_MODE1 0x1
+#define MODE_SEL_CONTROL_FSEL_MODE2 0x2
+#define MODE_SEL_CONTROL_FSEL_MODE3 0x3
+#define MODE_SEL_CONTROL_FSEL_DEBUG 0x4
+#define IPROC_IOPAD_MODE_BASE (HSLS_MODE_SEL_CONTROL + 0x29c)
+#define UART0_SIN_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x4a8)
+#define UART0_SOUT_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x4ac)
+#define UART1_SIN_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3b8)
+#define UART1_SOUT_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3bc)
+#define UARTx_SIN_MODE_SEL_CONTROL_FSEL 0
+#define UARTx_SOUT_MODE_SEL_CONTROL_FSEL 0
+
+/*******************************************************************************
+ * PKA constants
+ ******************************************************************************/
+#define ICFG_PKA_MEM_PWR_CTRL (HSLS_ICFG_REGS_BASE + 0xac0)
+#define ICFG_PKA_MEM_PWR_CTRL__POWERONIN BIT(0)
+#define ICFG_PKA_MEM_PWR_CTRL__POWEROKIN BIT(1)
+#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONIN BIT(2)
+#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKIN BIT(3)
+#define ICFG_PKA_MEM_PWR_CTRL__POWERONOUT BIT(4)
+#define ICFG_PKA_MEM_PWR_CTRL__POWEROKOUT BIT(5)
+#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONOUT BIT(6)
+#define ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKOUT BIT(7)
+#define ICFG_PKA_MEM_PWR_CTRL__ISO BIT(8)
+
+/*******************************************************************************
+ * RNG constants
+ ******************************************************************************/
+#define RNG_BASE_ADDR 0x68b20000
+
+/*******************************************************************************
+ * Trusted Watchdog constants
+ ******************************************************************************/
+#define ARM_SP805_TWDG_BASE 0x68b30000
+#define ARM_SP805_TWDG_CLK_HZ ((25 * 1000 * 1000) / 2)
+/*
+ * The TBBR document specifies a watchdog timeout of 256 seconds. SP805
+ * asserts reset after two consecutive countdowns (2 x 128 = 256 sec)
+ */
+#define ARM_TWDG_TIMEOUT_SEC 128
+#define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \
+ ARM_TWDG_TIMEOUT_SEC)
+
+/*******************************************************************************
+ * SOTP related constants
+ ******************************************************************************/
+#define SOTP_REGS_OTP_BASE 0x68b50000
+#define SOTP_CHIP_CTRL (SOTP_REGS_OTP_BASE + 0x4c)
+#define SOTP_CLEAR_SYSCTRL_ALL_MASTER_NS 0
+
+/*******************************************************************************
+ * DMAC/PL330 related constants
+ ******************************************************************************/
+#define DMAC_M0_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x408)
+#define BOOT_MANAGER_NS BIT(25)
+#define DMAC_M0_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0x800)
+#define ICFG_DMAC_CONFIG_0 (HSLS_ICFG_REGS_BASE + 0x190)
+#define ICFG_DMAC_CONFIG_1 (HSLS_ICFG_REGS_BASE + 0x194)
+#define ICFG_DMAC_CONFIG_2 (HSLS_ICFG_REGS_BASE + 0x198)
+#define BOOT_PERIPHERAL_NS 0xffffffff
+#define ICFG_DMAC_CONFIG_3 (HSLS_ICFG_REGS_BASE + 0x19c)
+#define BOOT_IRQ_NS 0x0000ffff
+#define ICFG_DMAC_SID_ARADDR_CONTROL (HSLS_ICFG_REGS_BASE + 0xaf0)
+#define ICFG_DMAC_SID_AWADDR_CONTROL (HSLS_ICFG_REGS_BASE + 0xaf4)
+#define ICFG_DMAC_MEM_PWR_CTRL__POWERONIN BIT(0)
+#define ICFG_DMAC_MEM_PWR_CTRL__POWEROKIN BIT(1)
+#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONIN BIT(2)
+#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKIN BIT(3)
+#define ICFG_DMAC_MEM_PWR_CTRL__POWERONOUT BIT(4)
+#define ICFG_DMAC_MEM_PWR_CTRL__POWEROKOUT BIT(5)
+#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONOUT BIT(6)
+#define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKOUT BIT(7)
+#define ICFG_DMAC_MEM_PWR_CTRL__ISO BIT(8)
+#define ICFG_DMAC_MEM_PWR_CTRL (HSLS_ICFG_REGS_BASE + 0xadc)
+
+/*******************************************************************************
+ * PNOR related constants
+ ******************************************************************************/
+#define PNOR_ICFG_BASE (HSLS_ICFG_REGS_BASE + 0x780)
+#define PNOR_ICFG_CS_0 PNOR_ICFG_BASE
+#define PNOR_ICFG_CS_1 (PNOR_ICFG_BASE + 0x4)
+#define PNOR_ICFG_CS_2 (PNOR_ICFG_BASE + 0x8)
+#define PNOR_ICFG_CS_x_MASK0_MASK 0xff
+#define PNOR_ICFG_CS_x_MASK0_SHIFT 8
+#define PNOR_ICFG_CS_x_MATCH0_MASK 0xff
+#define PNOR_ICFG_CS_x_MATCH0_SHIFT 0
+
+#define PNOR_IDM_BASE (HSLS_IDM_REGS_BASE + 0xb000)
+#define PNOR_IDM_IO_CONTROL_DIRECT (PNOR_IDM_BASE + 0x408)
+#define PNOR_IDM_IO_RESET_CONTROL (PNOR_IDM_BASE + 0x800)
+
+#define PNOR_REG_BASE 0x68c50000
+#define PNOR_REG_DIRECT_CMD (PNOR_REG_BASE + 0x010)
+#define PNOR_REG_SET_CYCLES (PNOR_REG_BASE + 0x014)
+#define PNOR_REG_SET_OPMODE (PNOR_REG_BASE + 0x018)
+#define PNOR_REG_REFRESH_0 (PNOR_REG_BASE + 0x020)
+#define PNOR_REG_PERIPH_ID0 (PNOR_REG_BASE + 0xfe0)
+#define PNOR_REG_PERIPH_ID1 (PNOR_REG_BASE + 0xfe4)
+#define PNOR_REG_PERIPH_ID2 (PNOR_REG_BASE + 0xfe8)
+#define PNOR_REG_PERIPH_ID3 (PNOR_REG_BASE + 0xfec)
+#define PNOR_REG_PERIPH_IDx_MASK 0xff
+
+/*******************************************************************************
+ * NAND related constants
+ ******************************************************************************/
+#define NAND_FLASH_REVISION 0x68c60000
+#define NAND_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0xa408)
+#define NAND_IDM_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xa800)
+
+/*******************************************************************************
+ * eMMC related constants
+ ******************************************************************************/
+#define PLAT_SD_MAX_READ_LENGTH 0x400
+
+#define SDIO0_EMMCSDXC_SYSADDR 0x68cf1000
+#define SDIO_IDM0_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x2408)
+#define SDIO_IDM1_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x3408)
+#define SDIO_IDM0_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0x2800)
+#define ICFG_SDIO0_BASE (HSLS_ICFG_REGS_BASE + 0x6e4)
+#define ICFG_SDIO1_BASE (HSLS_ICFG_REGS_BASE + 0x734)
+#define ICFG_SDIO0_CAP0 (ICFG_SDIO0_BASE + 0x10)
+#define ICFG_SDIO0_CAP1 (ICFG_SDIO0_BASE + 0x14)
+#define ICFG_SDIO0_SID (HSLS_ICFG_REGS_BASE + 0xb00)
+#define ICFG_SDIO1_SID (HSLS_ICFG_REGS_BASE + 0xb08)
+
+/*******************************************************************************
+ * Bootstrap related constants
+ ******************************************************************************/
+#define ROM_S0_IDM_IO_STATUS (HSLS_IDM_REGS_BASE + 0x9500)
+
+/*******************************************************************************
+ * ROM related constants
+ ******************************************************************************/
+#define ROM_BASE_ADDR 0x6ce00000
+#define ROM_VERSION_STRING_ADDR (ROM_BASE_ADDR + 0x28000)
+#define ROM_BUILD_MESSAGE_ADDR (ROM_BASE_ADDR + 0x28018)
+
+/*******************************************************************************
+ * Boot source peripheral related constants
+ ******************************************************************************/
+#define QSPI_CTRL_BASE_ADDR 0x68c70000
+#define QSPI_BASE_ADDR 0x70000000
+#define QSPI_SIZE 0x08000000
+#define NOR_BASE_ADDR 0x74000000
+#define NOR_SIZE 0x04000000
+#define NAND_BASE_ADDR 0x78000000
+#define NAND_SIZE 0x08000000
+
+#define QSPI_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xc800)
+
+#define APBR_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xe800)
+#define APBS_IDM_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xf800)
+
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x10408)
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_WDOG_SCLK_SEL 2
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM0_SCLK_SEL 4
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM1_SCLK_SEL 6
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM2_SCLK_SEL 8
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM3_SCLK_SEL 10
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM4_SCLK_SEL 12
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM5_SCLK_SEL 13
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM6_SCLK_SEL 14
+#define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM7_SCLK_SEL 15
+
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x11408)
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART0_SCLK_SEL 2
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART1_SCLK_SEL 4
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART2_SCLK_SEL 6
+#define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART3_SCLK_SEL 8
+
+#define APBZ_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x12408)
+#define APBZ_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0
+#define APBZ_IDM_IDM_IO_CONTROL_DIRECT_WDOG_SCLK_SEL 2
+
+/*******************************************************************************
+ * Stingray memory map related constants
+ ******************************************************************************/
+
+/* The last 4KB of Trusted SRAM are used as shared memory */
+#define BRCM_SHARED_RAM_SIZE 0x0
+#define BRCM_SHARED_RAM_BASE (PLAT_BRCM_TRUSTED_SRAM_BASE + \
+ PLAT_BRCM_TRUSTED_SRAM_SIZE - \
+ BRCM_SHARED_RAM_SIZE)
+
+/* Reserve 4 KB to store error logs in BL2 */
+#define BCM_ELOG_BL2_SIZE 0x00001000
+#define BCM_ELOG_BL2_BASE BL1_RW_LIMIT
+
+/* The remaining Trusted SRAM is used to load the BL images */
+#define BRCM_BL_RAM_BASE (PLAT_BRCM_TRUSTED_SRAM_BASE)
+#define BRCM_BL_RAM_SIZE (PLAT_BRCM_TRUSTED_SRAM_SIZE - \
+ BRCM_SHARED_RAM_SIZE)
+
+/* DDR Address where TMON temperature values are written */
+#define TMON_SHARED_DDR_ADDRESS 0x8f100000
+
+/* Reserve 4 kB to pass data to BL33 */
+#define BL33_SHARED_DDR_BASE 0x8f102000
+#define BL33_SHARED_DDR_SIZE 0x1000
+
+/* Default AP error logging base addr */
+#ifndef ELOG_AP_UART_LOG_BASE
+#define ELOG_AP_UART_LOG_BASE 0x8f110000
+#endif
+
+/* Reserve 16 to store error logs in BL31 */
+#define BCM_ELOG_BL31_BASE ELOG_AP_UART_LOG_BASE
+#define BCM_ELOG_BL31_SIZE 0x4000
+
+/*******************************************************************************
+ * Non-secure DDR Map
+ ******************************************************************************/
+#define BRCM_DRAM1_BASE ULL(0x80000000)
+#define BRCM_DRAM1_SIZE ULL(0x10000000)
+#define BRCM_DRAM2_BASE ULL(0x880000000)
+#define BRCM_DRAM2_SIZE ULL(0x780000000)
+#define BRCM_DRAM3_BASE ULL(0x8800000000)
+#define BRCM_DRAM3_SIZE ULL(0x7800000000)
+#define BRCM_SHARED_DRAM_BASE BL33_SHARED_DDR_BASE
+#define BRCM_SHARED_DRAM_SIZE BL33_SHARED_DDR_SIZE
+#define BRCM_EXT_SRAM_BASE ULL(0x74000000)
+#define BRCM_EXT_SRAM_SIZE ULL(0x4000000)
+
+/* Priority levels for platforms */
+#define PLAT_RAS_PRI 0x10
+#define PLAT_SDEI_CRITICAL_PRI 0x60
+#define PLAT_SDEI_NORMAL_PRI 0x70
+
+/* Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 */
+#define BRCM_IRQ_SEC_SGI_0 14
+#define BRCM_IRQ_SEC_SGI_1 15
+
+/* RTC periodic interrupt */
+#define BRCM_IRQ_SEC_SPI_0 49
+
+/*
+ * Macros for local power states in SR platforms encoded by State-ID field
+ * within the power-state parameter.
+ */
+
+/* Local power state for power domains in Run state. */
+#define PLAT_LOCAL_STATE_RUN 0
+
+/* Local power state for retention. Valid only for CPU power domains */
+#define PLAT_LOCAL_STATE_RET 1
+
+/*
+ * Local power state for OFF/power-down. Valid for CPU and cluster power
+ * domains.
+ */
+#define PLAT_LOCAL_STATE_OFF 2
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE PLAT_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE PLAT_LOCAL_STATE_OFF
+
+/* ChiMP-related constants */
+
+#define NITRO_TZPC_TZPCDECPROT0clr 0x60c01808
+#define NITRO_TZPC_TZPCDECPROT0clr__DECPROT0_chimp_m_clr_R 1
+
+#define NIC400_NITRO_CHIMP_S_IDM_IO_CONTROL_DIRECT 0x60e00408
+
+#define CHIMP_INDIRECT_ADDR_MASK 0x3fffff
+#define CHIMP_INDIRECT_BASE 0x60800000
+
+#define CHIMP_REG_ECO_RESERVED 0x3042400
+
+#define CHIMP_FLASH_ACCESS_DONE_BIT 2
+
+/* indicate FRU table programming is done successfully */
+#define CHIMP_FRU_PROG_DONE_BIT 9
+
+#define CHIMP_REG_CTRL_BPE_MODE_REG 0x0
+#define CHIMP_REG_CTRL_BPE_STAT_REG 0x4
+#define CHIMP_REG_CTRL_FSTBOOT_PTR_REG 0x8
+#define CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_L 1
+#define CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_R 1
+#define CHIMP_REG_CTRL_BASE 0x3040000
+#define CHIMP_FAST_BOOT_MODE_BIT 2
+#define CHIMP_REG_CHIMP_APE_SCPAD 0x3300000
+#define CHIMP_REG_CHIMP_SCPAD 0x3100000
+
+/* Chimp health status offset in scratch pad ram */
+#define CHIMP_HEALTH_STATUS_OFFSET 0x8
+/*
+ * If not in NIC mode then FASTBOOT can be enabled.
+ * "Not in NIC mode" means that FORCE_FASTBOOT is set
+ * and a valid (1 or 2) fastboot type is specified.
+ *
+ * Three types of fastboot are supported:
+ * 0 = No fastboot. Boots Nitro/ChiMP and lets ROM loader
+ * initialize ChiMP from NVRAM (QSPI).
+ *
+ * 1 = Jump in place (need a flat image)
+ * This is intended to speedup Nitro FW boot on Palladium,
+ * can be used with a real chip as well.
+ * 2 = Jump normally with decompression
+ * Modus operandi for a real chip. Works also on Palladium
+ * Note: image decompressing takes time on Palladium.
+ * 3 = No fastboot support. No ChiMP bringup
+ * (use only for AP debug or for ChiMP's deferred setup).
+ */
+#define CHIMP_FASTBOOT_JUMP_DECOMPRESS 2
+#define CHIMP_FASTBOOT_JUMP_IN_PLACE 1
+#define CHIMP_FASTBOOT_NITRO_RESET 0
+/*
+ * Definitions for a non-Nitro access
+ * to QSPI PAD after the handshake
+ */
+#define QSPI_HOLD_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3e8)
+#define QSPI_WP_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3ec)
+#define QSPI_SCK_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f0)
+#define QSPI_CS_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f4)
+#define QSPI_MOSI_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f8)
+#define QSPI_MISO_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3fc)
+
+/*******************************************************************************
+ * Stream IDs for different blocks of SR
+ * block_id for different blocks is as follows:
+ * PCIE : 0x0
+ * PAXC : 0x1
+ * FS4 : 0x2
+ * Rest of the masters(includes MHB via RNI): 0x3
+ ******************************************************************************/
+#define SR_SID_VAL(block_id, subblock_id, device_num) ((block_id << 13) | \
+ (subblock_id << 11) | \
+ (device_num))
+
+#define CRMU_STREAM_ID SR_SID_VAL(0x3, 0x0, 0x7)
+#define CRMU_SID_SHIFT 5
+
+#define DMAC_STREAM_ID SR_SID_VAL(0x3, 0x0, 0x0)
+#define DMAC_SID_SHIFT 5
+
+/* DDR SHMOO Values defines */
+#define IDRAM_SHMOO_VALUES_ADDR CRMU_IDRAM_BASE_ADDR
+#define DDR_SHMOO_VALUES_ADDR 0x8f103000
+#define SHMOO_SIZE_PER_CHANNEL 0x1000
+
+#endif /* SR_DEF_H */
diff --git a/plat/brcm/board/stingray/include/sr_utils.h b/plat/brcm/board/stingray/include/sr_utils.h
new file mode 100644
index 0000000..b3fc735
--- /dev/null
+++ b/plat/brcm/board/stingray/include/sr_utils.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SR_UTILS_H
+#define SR_UTILS_H
+
+#include <lib/mmio.h>
+
+#include <chip_id.h>
+#include <cmn_plat_util.h>
+#include <sr_def.h>
+
+static inline void brcm_stingray_set_qspi_mux(int enable_ap)
+{
+ mmio_write_32(QSPI_HOLD_N_MODE_SEL_CONTROL, enable_ap);
+ mmio_write_32(QSPI_WP_N_MODE_SEL_CONTROL, enable_ap);
+ mmio_write_32(QSPI_SCK_MODE_SEL_CONTROL, enable_ap);
+ mmio_write_32(QSPI_CS_N_MODE_SEL_CONTROL, enable_ap);
+ mmio_write_32(QSPI_MOSI_MODE_SEL_CONTROL, enable_ap);
+ mmio_write_32(QSPI_MISO_MODE_SEL_CONTROL, enable_ap);
+}
+
+static inline void brcm_stingray_set_straps(uint32_t boot_source)
+{
+ /* Enable software strap override */
+ mmio_setbits_32(CDRU_CHIP_STRAP_CTRL,
+ BIT(CDRU_CHIP_STRAP_CTRL__SOFTWARE_OVERRIDE));
+
+ /* set straps to the next boot source */
+ mmio_clrsetbits_32(CDRU_CHIP_STRAP_DATA,
+ BOOT_SOURCE_MASK,
+ boot_source);
+
+ /* Disable software strap override */
+ mmio_clrbits_32(CDRU_CHIP_STRAP_CTRL,
+ BIT(CDRU_CHIP_STRAP_CTRL__SOFTWARE_OVERRIDE));
+}
+
+#endif
diff --git a/plat/brcm/board/stingray/include/swreg.h b/plat/brcm/board/stingray/include/swreg.h
new file mode 100644
index 0000000..6e971ce
--- /dev/null
+++ b/plat/brcm/board/stingray/include/swreg.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SWREG_H
+#define SWREG_H
+
+/* default voltage if no valid OTP */
+#define VDDC_CORE_DEF_VOLT 910000 /* 0.91v */
+#define IHOST_DEF_VOLT 940000 /* 0.94v */
+
+#define B0_VDDC_CORE_DEF_VOLT 950000 /* 0.95v */
+#define B0_IHOST_DEF_VOLT 950000 /* 0.95v */
+#define B0_DDR_VDDC_DEF_VOLT 1000000 /* 1v */
+
+#define SWREG_IHOST1_DIS 4
+#define SWREG_IHOST1_REG_RESETB 5
+#define SWREG_IHOST1_PMU_STABLE 2
+
+enum sw_reg {
+ DDR_VDDC = 1,
+ IHOST03,
+ IHOST12,
+ IHOST_ARRAY,
+ DDRIO_SLAVE,
+ VDDC_CORE,
+ VDDC1,
+ DDRIO_MASTER
+};
+
+int set_swreg(enum sw_reg reg_id, uint32_t micro_volts);
+int swreg_firmware_update(void);
+
+#endif
diff --git a/plat/brcm/board/stingray/include/timer_sync.h b/plat/brcm/board/stingray/include/timer_sync.h
new file mode 100644
index 0000000..1f15bb0
--- /dev/null
+++ b/plat/brcm/board/stingray/include/timer_sync.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef TIMER_SYNC_H
+#define TIMER_SYNC_H
+
+void brcm_timer_sync_init(void);
+
+#endif
diff --git a/plat/brcm/board/stingray/include/usb_phy.h b/plat/brcm/board/stingray/include/usb_phy.h
new file mode 100644
index 0000000..7d83182
--- /dev/null
+++ b/plat/brcm/board/stingray/include/usb_phy.h
@@ -0,0 +1,244 @@
+/*
+ * Copyright (c) 2017 - 2021, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef USB_PHY_H
+#define USB_PHY_H
+
+#include <stdint.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <platform_def.h>
+
+#define DRDU2_U2PLL_NDIV_FRAC_OFFSET 0x0U
+
+#define DRDU2_U2PLL_NDIV_INT 0x4U
+
+#define DRDU2_U2PLL_CTRL 0x8U
+#define DRDU2_U2PLL_LOCK BIT(6U)
+#define DRDU2_U2PLL_RESETB BIT(5U)
+#define DRDU2_U2PLL_PDIV_MASK 0xFU
+#define DRDU2_U2PLL_PDIV_OFFSET 1U
+#define DRDU2_U2PLL_SUSPEND_EN BIT(0U)
+
+#define DRDU2_PHY_CTRL 0x0CU
+#define DRDU2_U2IDDQ BIT(30U)
+#define DRDU2_U2SOFT_RST_N BIT(29U)
+#define DRDU2_U2PHY_ON_FLAG BIT(22U)
+#define DRDU2_U2PHY_PCTL_MASK 0xFFFFU
+#define DRDU2_U2PHY_PCTL_OFFSET 6U
+#define DRDU2_U2PHY_RESETB BIT(5U)
+#define DRDU2_U2PHY_ISO BIT(4U)
+#define DRDU2_U2AFE_BG_PWRDWNB BIT(3U)
+#define DRDU2_U2AFE_PLL_PWRDWNB BIT(2U)
+#define DRDU2_U2AFE_LDO_PWRDWNB BIT(1U)
+#define DRDU2_U2CTRL_CORERDY BIT(0U)
+
+#define DRDU2_STRAP_CTRL 0x18U
+#define DRDU2_FORCE_HOST_MODE BIT(5U)
+#define DRDU2_FORCE_DEVICE_MODE BIT(4U)
+#define BDC_USB_STP_SPD_MASK 0x7U
+#define BDC_USB_STP_SPD_OFFSET 0U
+
+#define DRDU2_PWR_CTRL 0x1CU
+#define DRDU2_U2PHY_DFE_SWITCH_PWROKIN_I BIT(2U)
+#define DRDU2_U2PHY_DFE_SWITCH_PWRONIN_I BIT(1U)
+
+#define DRDU2_SOFT_RESET_CTRL 0x20U
+#define DRDU2_BDC_AXI_SOFT_RST_N BIT(0U)
+
+#define USB3H_U2PLL_NDIV_FRAC 0x4U
+
+#define USB3H_U2PLL_NDIV_INT 0x8U
+
+#define USB3H_U2PLL_CTRL 0xCU
+#define USB3H_U2PLL_LOCK BIT(6U)
+#define USB3H_U2PLL_RESETB BIT(5U)
+#define USB3H_U2PLL_PDIV_MASK 0xFU
+#define USB3H_U2PLL_PDIV_OFFSET 1U
+
+#define USB3H_U2PHY_CTRL 0x10U
+#define USB3H_U2PHY_ON_FLAG 22U
+#define USB3H_U2PHY_PCTL_MASK 0xFFFFU
+#define USB3H_U2PHY_PCTL_OFFSET 6U
+#define USB3H_U2PHY_IDDQ BIT(29U)
+#define USB3H_U2PHY_RESETB BIT(5U)
+#define USB3H_U2PHY_ISO BIT(4U)
+#define USB3H_U2AFE_BG_PWRDWNB BIT(3U)
+#define USB3H_U2AFE_PLL_PWRDWNB BIT(2U)
+#define USB3H_U2AFE_LDO_PWRDWNB BIT(1U)
+#define USB3H_U2CTRL_CORERDY BIT(0U)
+
+#define USB3H_U3PHY_CTRL 0x14U
+#define USB3H_U3SOFT_RST_N BIT(30U)
+#define USB3H_U3MDIO_RESETB_I BIT(29U)
+#define USB3H_U3POR_RESET_I BIT(28U)
+#define USB3H_U3PHY_PCTL_MASK 0xFFFFU
+#define USB3H_U3PHY_PCTL_OFFSET 2U
+#define USB3H_U3PHY_RESETB BIT(1U)
+
+#define USB3H_U3PHY_PLL_CTRL 0x18U
+#define USB3H_U3PLL_REFCLK_MASK 0x7U
+#define USB3H_U3PLL_REFCLK_OFFSET 4U
+#define USB3H_U3PLL_SS_LOCK BIT(3U)
+#define USB3H_U3PLL_SEQ_START BIT(2U)
+#define USB3H_U3SSPLL_SUSPEND_EN BIT(1U)
+#define USB3H_U3PLL_RESETB BIT(0U)
+
+#define USB3H_PWR_CTRL 0x28U
+#define USB3H_PWR_CTRL_OVERRIDE_I_R 4U
+#define USB3H_PWR_CTRL_U2PHY_DFE_SWITCH_PWROKIN BIT(11U)
+#define USB3H_PWR_CTRL_U2PHY_DFE_SWITCH_PWRONIN BIT(10U)
+
+#define USB3H_SOFT_RESET_CTRL 0x2CU
+#define USB3H_XHC_AXI_SOFT_RST_N BIT(1U)
+
+#define USB3H_PHY_PWR_CTRL 0x38U
+#define USB3H_DISABLE_USB30_P0 BIT(2U)
+#define USB3H_DISABLE_EUSB_P1 BIT(1U)
+#define USB3H_DISABLE_EUSB_P0 BIT(0U)
+
+
+#define DRDU3_U2PLL_NDIV_FRAC 0x4U
+
+#define DRDU3_U2PLL_NDIV_INT 0x8U
+
+#define DRDU3_U2PLL_CTRL 0xCU
+#define DRDU3_U2PLL_LOCK BIT(6U)
+#define DRDU3_U2PLL_RESETB BIT(5U)
+#define DRDU3_U2PLL_PDIV_MASK 0xFU
+#define DRDU3_U2PLL_PDIV_OFFSET 1U
+
+#define DRDU3_U2PHY_CTRL 0x10U
+#define DRDU3_U2PHY_IDDQ BIT(29U)
+#define DRDU3_U2PHY_ON_FLAG BIT(22U)
+#define DRDU3_U2PHY_PCTL_MASK 0xFFFFU
+#define DRDU3_U2PHY_PCTL_OFFSET 6U
+#define DRDU3_U2PHY_RESETB BIT(5U)
+#define DRDU3_U2PHY_ISO BIT(4U)
+#define DRDU3_U2AFE_BG_PWRDWNB BIT(3U)
+#define DRDU3_U2AFE_PLL_PWRDWNB BIT(2U)
+#define DRDU3_U2AFE_LDO_PWRDWNB BIT(1U)
+#define DRDU3_U2CTRL_CORERDY BIT(0U)
+
+#define DRDU3_U3PHY_CTRL 0x14U
+#define DRDU3_U3XHC_SOFT_RST_N BIT(31U)
+#define DRDU3_U3BDC_SOFT_RST_N BIT(30U)
+#define DRDU3_U3MDIO_RESETB_I BIT(29U)
+#define DRDU3_U3POR_RESET_I BIT(28U)
+#define DRDU3_U3PHY_PCTL_MASK 0xFFFFU
+#define DRDU3_U3PHY_PCTL_OFFSET 2U
+#define DRDU3_U3PHY_RESETB BIT(1U)
+
+#define DRDU3_U3PHY_PLL_CTRL 0x18U
+#define DRDU3_U3PLL_REFCLK_MASK 0x7U
+#define DRDU3_U3PLL_REFCLK_OFFSET 4U
+#define DRDU3_U3PLL_SS_LOCK BIT(3U)
+#define DRDU3_U3PLL_SEQ_START BIT(2U)
+#define DRDU3_U3SSPLL_SUSPEND_EN BIT(1U)
+#define DRDU3_U3PLL_RESETB BIT(0U)
+
+#define DRDU3_STRAP_CTRL 0x28U
+#define BDC_USB_STP_SPD_MASK 0x7U
+#define BDC_USB_STP_SPD_OFFSET 0U
+#define BDC_USB_STP_SPD_SS 0x0U
+#define BDC_USB_STP_SPD_HS 0x2U
+
+#define DRDU3_PWR_CTRL 0x2cU
+#define DRDU3_U2PHY_DFE_SWITCH_PWROKIN BIT(12U)
+#define DRDU3_U2PHY_DFE_SWITCH_PWRONIN BIT(11U)
+#define DRDU3_PWR_CTRL_OVERRIDE_I_R 4U
+
+#define DRDU3_SOFT_RESET_CTRL 0x30U
+#define DRDU3_XHC_AXI_SOFT_RST_N BIT(1U)
+#define DRDU3_BDC_AXI_SOFT_RST_N BIT(0U)
+
+#define DRDU3_PHY_PWR_CTRL 0x3cU
+#define DRDU3_DISABLE_USB30_P0 BIT(2U)
+#define DRDU3_DISABLE_EUSB_P1 BIT(1U)
+#define DRDU3_DISABLE_EUSB_P0 BIT(0U)
+
+#define PLL_REFCLK_PAD 0x0U
+#define PLL_REFCLK_25MHZ 0x1U
+#define PLL_REFCLK_96MHZ 0x2U
+#define PLL_REFCLK_INTERNAL 0x3U
+/* USB PLL lock time out for 10 ms */
+#define PLL_LOCK_RETRY_COUNT 10000U
+
+
+#define U2PLL_NDIV_INT_VAL 0x13U
+#define U2PLL_NDIV_FRAC_VAL 0x1005U
+#define U2PLL_PDIV_VAL 0x1U
+/*
+ * Using external FSM
+ * BIT-3:2: device mode; mode is not effect
+ * BIT-1: soft reset active low
+ */
+#define U2PHY_PCTL_VAL 0x0003U
+/* Non-driving signal low */
+#define U2PHY_PCTL_NON_DRV_LOW 0x0002U
+#define U3PHY_PCTL_VAL 0x0006U
+
+#define MAX_NR_PORTS 3U
+
+#define USB3H_DRDU2_PHY 1U
+#define DRDU3_PHY 2U
+
+#define USB_HOST_MODE 1U
+#define USB_DEV_MODE 2U
+
+#define USB3SS_PORT 0U
+#define DRDU2_PORT 1U
+#define USB3HS_PORT 2U
+
+#define DRD3SS_PORT 0U
+#define DRD3HS_PORT 1U
+
+#define SR_USB_PHY_COUNT 2U
+
+#define DRDU3_PIPE_CTRL 0x68500000U
+#define DRDU3H_XHC_REGS_CPLIVER 0x68501000U
+#define USB3H_PIPE_CTRL 0x68510000U
+#define DRD2U3H_XHC_REGS_CPLIVER 0x68511000U
+#define DRDU2_U2PLL_NDIV_FRAC 0x68520000U
+
+#define AXI_DEBUG_CTRL 0x68500038U
+#define AXI_DBG_CTRL_SSPHY_DRD_MODE_DISABLE BIT(12U)
+
+#define USB3H_DEBUG_CTRL 0x68510034U
+#define USB3H_DBG_CTRL_SSPHY_DRD_MODE_DISABLE BIT(7U)
+
+typedef struct _usb_phy_port usb_phy_port_t;
+
+typedef struct {
+ uint32_t drdu2reg;
+ uint32_t usb3hreg;
+ uint32_t drdu3reg;
+ uint32_t phy_id;
+ uint32_t ports_enabled;
+ uint32_t initialized;
+ usb_phy_port_t *phy_port;
+} usb_phy_t;
+
+struct _usb_phy_port {
+ uint32_t port_id;
+ uint32_t mode;
+ uint32_t enabled;
+ usb_phy_t *p;
+};
+
+struct u2_phy_ext_fsm {
+ uint32_t pll_ctrl_reg;
+ uint32_t phy_ctrl_reg;
+ uint32_t phy_iddq;
+ uint32_t pwr_ctrl_reg;
+ uint32_t pwr_okin;
+ uint32_t pwr_onin;
+};
+
+#endif /* USB_PHY_H */
diff --git a/plat/brcm/board/stingray/platform.mk b/plat/brcm/board/stingray/platform.mk
new file mode 100644
index 0000000..aa2fe86
--- /dev/null
+++ b/plat/brcm/board/stingray/platform.mk
@@ -0,0 +1,304 @@
+#
+# Copyright (c) 2019-2021, Broadcom
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Set the toc_flags to 1 for 100% speed operation
+# Set the toc_flags to 2 for 50% speed operation
+# Set the toc_flags to 3 for 25% speed operation
+# Set the toc_flags bit 3 to indicate ignore the fip in UEFI copy mode
+PLAT_TOC_FLAGS := 0x0
+
+# Set the IHOST_PLL_FREQ to,
+# 1 for full speed
+# 2 for 50% speed
+# 3 for 25% speed
+# 0 for bypass
+$(eval $(call add_define_val,IHOST_PLL_FREQ,1))
+
+# Enable workaround for ERRATA_A72_859971
+ERRATA_A72_859971 := 1
+
+# Cache Coherency Interconnect Driver needed
+DRIVER_CC_ENABLE := 1
+$(eval $(call add_define,DRIVER_CC_ENABLE))
+
+# Enable to erase eMMC
+INCLUDE_EMMC_DRIVER_ERASE_CODE := 0
+
+ifeq (${INCLUDE_EMMC_DRIVER_ERASE_CODE},1)
+$(eval $(call add_define,INCLUDE_EMMC_DRIVER_ERASE_CODE))
+endif
+
+# BL31 is in DRAM
+ARM_BL31_IN_DRAM := 1
+
+ifneq (${USE_EMULATOR},yes)
+STINGRAY_EMULATION_SETUP := 0
+ifeq (${FASTBOOT_TYPE},)
+override FASTBOOT_TYPE := 0
+endif
+USE_PAXB := yes
+USE_PAXC := yes
+USE_CHIMP := yes
+endif
+
+USE_CRMU_SRAM := yes
+
+# Disable FS4 clocks - they can be reenabled when needed by linux
+FS4_DISABLE_CLOCK := yes
+
+# Enable error logging by default for Stingray
+BCM_ELOG := yes
+
+# Enable FRU support by default for Stingray
+ifeq (${USE_FRU},)
+USE_FRU := no
+endif
+
+# Use single cluster
+ifeq (${USE_SINGLE_CLUSTER},yes)
+$(info Using Single Cluster)
+$(eval $(call add_define,USE_SINGLE_CLUSTER))
+endif
+
+# Use DDR
+ifeq (${USE_DDR},yes)
+$(info Using DDR)
+$(eval $(call add_define,USE_DDR))
+endif
+
+ifeq (${BOARD_CFG},)
+BOARD_CFG := bcm958742t
+endif
+
+# Use USB
+ifeq (${USE_USB},yes)
+$(info Using USB)
+$(eval $(call add_define,USE_USB))
+endif
+
+# Use PAXB
+ifeq (${USE_PAXB},yes)
+$(info Using PAXB)
+$(eval $(call add_define,USE_PAXB))
+endif
+
+# Use FS4
+ifeq (${USE_FS4},yes)
+$(info Using FS4)
+$(eval $(call add_define,USE_FS4))
+endif
+
+# Use FS6
+ifeq (${USE_FS6},yes)
+$(info Using FS6)
+$(eval $(call add_define,USE_FS6))
+endif
+
+# Disable FS4 clock
+ifeq (${FS4_DISABLE_CLOCK},yes)
+$(info Using FS4_DISABLE_CLOCK)
+$(eval $(call add_define,FS4_DISABLE_CLOCK))
+endif
+
+ifneq (${NCSI_IO_DRIVE_STRENGTH_MA},)
+$(info Using NCSI_IO_DRIVE_STRENGTH_MA)
+$(eval $(call add_define,NCSI_IO_DRIVE_STRENGTH_MA))
+endif
+
+# Use NAND
+ifeq (${USE_NAND},$(filter yes, ${USE_NAND}))
+$(info Using NAND)
+$(eval $(call add_define,USE_NAND))
+endif
+
+# Enable Broadcom error logging support
+ifeq (${BCM_ELOG},yes)
+$(info Using BCM_ELOG)
+$(eval $(call add_define,BCM_ELOG))
+endif
+
+# BL31 build for standalone mode
+ifeq (${STANDALONE_BL31},yes)
+RESET_TO_BL31 := 1
+$(info Using RESET_TO_BL31)
+endif
+
+# BL31 force full frequency for all CPUs
+ifeq (${BL31_FORCE_CPU_FULL_FREQ},yes)
+$(info Using BL31_FORCE_CPU_FULL_FREQ)
+$(eval $(call add_define,BL31_FORCE_CPU_FULL_FREQ))
+endif
+
+# Enable non-secure accesses to CCN registers
+ifeq (${BL31_CCN_NONSECURE},yes)
+$(info Using BL31_CCN_NONSECURE)
+$(eval $(call add_define,BL31_CCN_NONSECURE))
+endif
+
+# Use ChiMP
+ifeq (${USE_CHIMP},yes)
+$(info Using ChiMP)
+$(eval $(call add_define,USE_CHIMP))
+endif
+
+# Use PAXC
+ifeq (${USE_PAXC},yes)
+$(info Using PAXC)
+$(eval $(call add_define,USE_PAXC))
+ifeq (${CHIMPFW_USE_SIDELOAD},yes)
+$(info Using ChiMP FW sideload)
+$(eval $(call add_define,CHIMPFW_USE_SIDELOAD))
+endif
+$(eval $(call add_define,FASTBOOT_TYPE))
+$(eval $(call add_define,CHIMP_FB1_ENTRY))
+endif
+
+ifeq (${DEFAULT_SWREG_CONFIG}, 1)
+$(eval $(call add_define,DEFAULT_SWREG_CONFIG))
+endif
+
+ifeq (${CHIMP_ALWAYS_NEEDS_QSPI},yes)
+$(eval $(call add_define,CHIMP_ALWAYS_NEEDS_QSPI))
+endif
+
+# For testing purposes, use memsys stubs. Remove once memsys is fully tested.
+USE_MEMSYS_STUBS := yes
+
+# Default, use BL1_RW area
+ifneq (${BL2_USE_BL1_RW},no)
+$(eval $(call add_define,USE_BL1_RW))
+endif
+
+# Default soft reset is L3
+$(eval $(call add_define,CONFIG_SOFT_RESET_L3))
+
+# Enable Chip OTP driver
+DRIVER_OCOTP_ENABLE := 1
+
+ifneq (${WARMBOOT_DDR_S3_SUPPORT},)
+DRIVER_SPI_ENABLE := 1
+endif
+
+include plat/brcm/board/common/board_common.mk
+
+SOC_DIR := brcm/board/stingray
+
+PLAT_INCLUDES += -Iplat/${SOC_DIR}/include/ \
+ -Iinclude/plat/brcm/common/ \
+ -Iplat/brcm/common/
+
+PLAT_BL_COMMON_SOURCES += lib/cpus/aarch64/cortex_a72.S \
+ plat/${SOC_DIR}/aarch64/plat_helpers.S \
+ drivers/ti/uart/aarch64/16550_console.S \
+ plat/${SOC_DIR}/src/tz_sec.c \
+ drivers/arm/tzc/tzc400.c \
+ plat/${SOC_DIR}/driver/plat_emmc.c \
+ plat/${SOC_DIR}/src/topology.c \
+ drivers/brcm/mdio/mdio.c
+
+ifeq (${USE_CHIMP},yes)
+PLAT_BL_COMMON_SOURCES += drivers/brcm/chimp.c
+endif
+
+ifeq (${USE_USB},yes)
+PLAT_BL_COMMON_SOURCES += plat/${SOC_DIR}/driver/usb.c \
+ plat/${SOC_DIR}/driver/usb_phy.c
+endif
+
+BL2_SOURCES += plat/${SOC_DIR}/driver/ihost_pll_config.c \
+ plat/${SOC_DIR}/src/bl2_setup.c \
+ plat/${SOC_DIR}/driver/swreg.c
+
+ifeq (${USE_DDR},yes)
+PLAT_INCLUDES += -Iplat/${SOC_DIR}/driver/ddr/soc/include
+else
+PLAT_INCLUDES += -Iplat/${SOC_DIR}/driver/ext_sram_init
+BL2_SOURCES += plat/${SOC_DIR}/driver/ext_sram_init/ext_sram_init.c
+endif
+
+# Include GICv3 driver files
+include drivers/arm/gic/v3/gicv3.mk
+
+BRCM_GIC_SOURCES := ${GICV3_SOURCES} \
+ plat/common/plat_gicv3.c \
+ plat/brcm/common/brcm_gicv3.c
+
+BL31_SOURCES += \
+ drivers/arm/ccn/ccn.c \
+ plat/brcm/board/common/timer_sync.c \
+ plat/brcm/common/brcm_ccn.c \
+ plat/common/plat_psci_common.c \
+ plat/${SOC_DIR}/driver/ihost_pll_config.c \
+ plat/${SOC_DIR}/src/bl31_setup.c \
+ plat/${SOC_DIR}/src/fsx.c \
+ plat/${SOC_DIR}/src/iommu.c \
+ plat/${SOC_DIR}/src/sdio.c \
+ ${BRCM_GIC_SOURCES}
+
+ifneq (${NCSI_IO_DRIVE_STRENGTH_MA},)
+BL31_SOURCES += plat/${SOC_DIR}/src/ncsi.c
+endif
+
+ifeq (${USE_PAXB},yes)
+BL31_SOURCES += plat/${SOC_DIR}/src/paxb.c
+BL31_SOURCES += plat/${SOC_DIR}/src/sr_paxb_phy.c
+endif
+
+ifeq (${USE_PAXC},yes)
+BL31_SOURCES += plat/${SOC_DIR}/src/paxc.c
+endif
+
+ifdef SCP_BL2
+PLAT_INCLUDES += -Iplat/brcm/common/
+
+BL2_SOURCES += plat/brcm/common/brcm_mhu.c \
+ plat/brcm/common/brcm_scpi.c \
+ plat/${SOC_DIR}/src/scp_utils.c \
+ plat/${SOC_DIR}/src/scp_cmd.c \
+ drivers/brcm/scp.c
+
+BL31_SOURCES += plat/brcm/common/brcm_mhu.c \
+ plat/brcm/common/brcm_scpi.c \
+ plat/${SOC_DIR}/src/brcm_pm_ops.c
+else
+BL31_SOURCES += plat/${SOC_DIR}/src/ihost_pm.c \
+ plat/${SOC_DIR}/src/pm.c
+endif
+
+ifeq (${ELOG_SUPPORT},1)
+ifeq (${ELOG_STORE_MEDIA},DDR)
+BL2_SOURCES += plat/brcm/board/common/bcm_elog_ddr.c
+endif
+endif
+
+ifeq (${BL31_BOOT_PRELOADED_SCP}, 1)
+ifdef SCP_BL2
+SCP_CFG_DIR=$(dir ${SCP_BL2})
+PLAT_INCLUDES += -I${SCP_CFG_DIR}
+endif
+PLAT_INCLUDES += -Iplat/brcm/common/
+
+# By default use OPTEE Assigned memory
+PRELOADED_SCP_BASE ?= 0x8E000000
+PRELOADED_SCP_SIZE ?= 0x10000
+$(eval $(call add_define,PRELOADED_SCP_BASE))
+$(eval $(call add_define,PRELOADED_SCP_SIZE))
+$(eval $(call add_define,BL31_BOOT_PRELOADED_SCP))
+BL31_SOURCES += plat/${SOC_DIR}/src/scp_utils.c \
+ plat/${SOC_DIR}/src/scp_cmd.c \
+ drivers/brcm/scp.c
+endif
+
+# Do not execute the startup code on warm reset.
+PROGRAMMABLE_RESET_ADDRESS := 1
+
+# Nitro FW, config and Crash log uses secure DDR memory
+# Inaddition to above, Nitro master and slave is also secure
+ifneq ($(NITRO_SECURE_ACCESS),)
+$(eval $(call add_define,NITRO_SECURE_ACCESS))
+$(eval $(call add_define,DDR_NITRO_SECURE_REGION_START))
+$(eval $(call add_define,DDR_NITRO_SECURE_REGION_END))
+endif
diff --git a/plat/brcm/board/stingray/src/bl2_setup.c b/plat/brcm/board/stingray/src/bl2_setup.c
new file mode 100644
index 0000000..b2c8aec
--- /dev/null
+++ b/plat/brcm/board/stingray/src/bl2_setup.c
@@ -0,0 +1,743 @@
+/*
+ * Copyright (c) 2016-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/arm/sp805.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <chimp.h>
+#include <chip_id.h>
+#include <cmn_plat_util.h>
+#include <dmu.h>
+#include <emmc_api.h>
+#include <fru.h>
+#ifdef USE_GPIO
+#include <drivers/gpio.h>
+#include <iproc_gpio.h>
+#endif
+#include <platform_def.h>
+#include <sotp.h>
+#include <swreg.h>
+#include <sr_utils.h>
+#ifdef USE_DDR
+#include <ddr_init.h>
+#else
+#include <ext_sram_init.h>
+#endif
+#if DRIVER_OCOTP_ENABLE
+#include <ocotp.h>
+#endif
+#include "board_info.h"
+
+#define WORD_SIZE 8
+#define SWREG_AVS_OTP_OFFSET (13 * WORD_SIZE) /* 13th row byte offset */
+#define AON_GPIO_OTP_OFFSET (28 * WORD_SIZE) /* 28th row byte offset */
+#define BYTES_TO_READ 8
+
+/* OTP voltage step definitions */
+#define MVOLT_STEP_MAX 0x18 /* 1v */
+#define MVOLT_PER_STEP 10 /* 0.01mv per step */
+#define MVOLT_BASE 760 /* 0.76v */
+
+#define STEP_TO_UVOLTS(step) \
+ ((MVOLT_BASE + (MVOLT_PER_STEP * (step))) * 1000)
+
+#define GET_BITS(first, last, data) \
+ ((data >> first) & ((1 << (last - first + 1)) - 1))
+
+/*
+ * SW-REG OTP encoding:
+ *
+ * SWREG_bits[11:0] = OTP 13th row 12 bits[55:44]
+ * SWREG_bits[11:10] - Valid Bits (0x2 - valid, if not 0x2 - Invalid)
+ * SWREG_bits[9:5] - iHost03, iHost12
+ * SWREG_bits[4:0] - Core VDDC
+ */
+#define SWREG_OTP_BITS_START 12 /* 44th bit in MSB 32-bits */
+#define SWREG_OTP_BITS_END 23 /* 55th bit in MSB 32-bits */
+#define SWREG_VDDC_FIELD_START 0
+#define SWREG_VDDC_FIELD_END 4
+#define SWREG_IHOST_FIELD_START 5
+#define SWREG_IHOST_FIELD_END 9
+#define SWREG_VALID_BIT_START 10
+#define SWREG_VALID_BIT_END 11
+#define SWREG_VALID_BITS 0x2
+
+/*
+ * Row 13 bit 56 is programmed as '1' today. It is not being used, so plan
+ * is to flip this bit to '0' for B1 rev. Hence SW can leverage this bit
+ * to identify Bx chip to program different sw-regulators.
+ */
+#define SPARE_BIT 24
+
+#define IS_SR_B0(data) (((data) >> SPARE_BIT) & 0x1)
+
+#if DRIVER_OCOTP_ENABLE
+static struct otpc_map otp_stingray_map = {
+ .otpc_row_size = 2,
+ .data_r_offset = {0x10, 0x5c},
+ .data_w_offset = {0x2c, 0x64},
+ .word_size = 8,
+ .stride = 8,
+};
+#endif
+
+void plat_bcm_bl2_early_platform_setup(void)
+{
+ /* Select UART0 for AP via mux setting*/
+ if (PLAT_BRCM_BOOT_UART_BASE == UART0_BASE_ADDR) {
+ mmio_write_32(UART0_SIN_MODE_SEL_CONTROL, 1);
+ mmio_write_32(UART0_SOUT_MODE_SEL_CONTROL, 1);
+ }
+}
+
+#ifdef USE_NAND
+static void brcm_stingray_nand_init(void)
+{
+ unsigned int val;
+ unsigned int nand_idm_reset_control = 0x68e0a800;
+
+ VERBOSE(" stingray nand init start.\n");
+
+ /* Reset NAND */
+ VERBOSE(" - reset nand\n");
+ val = mmio_read_32((uintptr_t)(nand_idm_reset_control + 0x0));
+ mmio_write_32((uintptr_t)(nand_idm_reset_control + 0x0), val | 0x1);
+ udelay(500);
+ val = mmio_read_32((uintptr_t)(nand_idm_reset_control + 0x0));
+ mmio_write_32((uintptr_t)(nand_idm_reset_control + 0x0), val & ~0x1);
+ udelay(500);
+
+ VERBOSE(" stingray nand init done.\n");
+}
+#endif
+
+#if defined(USE_PAXB) || defined(USE_PAXC) || defined(USE_SATA)
+#define PCIE_RESCAL_CFG_0 0x40000130
+#define PCIE_CFG_RESCAL_RSTB_R (1 << 16)
+#define PCIE_CFG_RESCAL_PWRDNB_R (1 << 8)
+#define PCIE_RESCAL_STATUS_0 0x4000014c
+#define PCIE_STAT_PON_VALID_R (1 << 0)
+#define PCIE_RESCAL_OUTPUT_STATUS 0x40000154
+#define CDRU_PCIE_RESET_N_R (1 << CDRU_MISC_RESET_CONTROL__CDRU_PCIE_RESET_N_R)
+
+#ifdef EMULATION_SETUP
+static void brcm_stingray_pcie_reset(void)
+{
+}
+#else
+static void brcm_stingray_pcie_reset(void)
+{
+ unsigned int data;
+ int try;
+
+ if (bcm_chimp_is_nic_mode()) {
+ INFO("NIC mode detected; PCIe reset/rescal not executed\n");
+ return;
+ }
+
+ mmio_clrbits_32(CDRU_MISC_RESET_CONTROL, CDRU_PCIE_RESET_N_R);
+ mmio_setbits_32(CDRU_MISC_RESET_CONTROL, CDRU_PCIE_RESET_N_R);
+ /* Release reset */
+ mmio_setbits_32(PCIE_RESCAL_CFG_0, PCIE_CFG_RESCAL_RSTB_R);
+ mdelay(1);
+ /* Power UP */
+ mmio_setbits_32(PCIE_RESCAL_CFG_0,
+ (PCIE_CFG_RESCAL_RSTB_R | PCIE_CFG_RESCAL_PWRDNB_R));
+
+ try = 1000;
+ do {
+ udelay(1);
+ data = mmio_read_32(PCIE_RESCAL_STATUS_0);
+ try--;
+ } while ((data & PCIE_STAT_PON_VALID_R) == 0x0 && (try > 0));
+
+ if (try <= 0)
+ ERROR("PCIE_RESCAL_STATUS_0: 0x%x\n", data);
+
+ VERBOSE("PCIE_SATA_RESCAL_STATUS_0 0x%x.\n",
+ mmio_read_32(PCIE_RESCAL_STATUS_0));
+ VERBOSE("PCIE_SATA_RESCAL_OUTPUT_STATUS 0x%x.\n",
+ mmio_read_32(PCIE_RESCAL_OUTPUT_STATUS));
+ INFO("PCIE SATA Rescal Init done\n");
+}
+#endif /* EMULATION_SETUP */
+#endif /* USE_PAXB || USE_PAXC || USE_SATA */
+
+#ifdef USE_PAXC
+void brcm_stingray_chimp_check_and_fastboot(void)
+{
+ int fastboot_init_result;
+
+ if (bcm_chimp_is_nic_mode())
+ /* Do not wait here */
+ return;
+
+#if WARMBOOT_DDR_S3_SUPPORT
+ /*
+ * Currently DDR shmoo parameters and QSPI boot source are
+ * tied. DDR shmoo parameters are stored in QSPI, which is
+ * used for warmboot.
+ * Do not reset nitro for warmboot
+ */
+ if (is_warmboot() && (boot_source_get() == BOOT_SOURCE_QSPI))
+ return;
+#endif /* WARMBOOT_DDR_S3_SUPPORT */
+
+ /*
+ * Not in NIC mode,
+ * initiate fastboot (if enabled)
+ */
+ if (FASTBOOT_TYPE == CHIMP_FASTBOOT_NITRO_RESET) {
+
+ VERBOSE("Bring up Nitro/ChiMP\n");
+
+ if (boot_source_get() == BOOT_SOURCE_QSPI)
+ WARN("Nitro boots from QSPI when AP has booted from QSPI.\n");
+ brcm_stingray_set_qspi_mux(0);
+ VERBOSE("Nitro controls the QSPI\n");
+ }
+
+ fastboot_init_result = bcm_chimp_initiate_fastboot(FASTBOOT_TYPE);
+ if (fastboot_init_result && boot_source_get() != BOOT_SOURCE_QSPI)
+ ERROR("Nitro init error %d. Status: 0x%x; bpe_mod reg: 0x%x\n"
+ "fastboot register: 0x%x; handshake register 0x%x\n",
+ fastboot_init_result,
+ bcm_chimp_read_ctrl(CHIMP_REG_CTRL_BPE_STAT_REG),
+ bcm_chimp_read_ctrl(CHIMP_REG_CTRL_BPE_MODE_REG),
+ bcm_chimp_read_ctrl(CHIMP_REG_CTRL_FSTBOOT_PTR_REG),
+ bcm_chimp_read(CHIMP_REG_ECO_RESERVED));
+
+ /*
+ * CRMU watchdog kicks is an example, which is L1 reset,
+ * does not clear Nitro scratch pad ram.
+ * For Nitro resets: Clear the Nitro health status memory.
+ */
+ bcm_chimp_write((CHIMP_REG_CHIMP_SCPAD + CHIMP_HEALTH_STATUS_OFFSET),
+ 0);
+}
+#endif
+
+void set_ihost_vddc_swreg(uint32_t ihost_uvolts, uint32_t vddc_uvolts)
+{
+ NOTICE("ihost_uvolts: %duv, vddc_uvolts: %duv\n",
+ ihost_uvolts, vddc_uvolts);
+
+ set_swreg(VDDC_CORE, vddc_uvolts);
+ set_swreg(IHOST03, ihost_uvolts);
+ set_swreg(IHOST12, ihost_uvolts);
+}
+
+/*
+ * Reads SWREG AVS OTP bits (13th row) with ECC enabled and get voltage
+ * defined in OTP if valid OTP is found
+ */
+void read_avs_otp_bits(uint32_t *ihost_uvolts, uint32_t *vddc_uvolts)
+{
+ uint32_t offset = SWREG_AVS_OTP_OFFSET;
+ uint32_t ihost_step, vddc_step;
+ uint32_t avs_bits;
+ uint32_t buf[2];
+
+ if (bcm_otpc_read(offset, &buf[0], BYTES_TO_READ, 1) == -1)
+ return;
+
+ VERBOSE("AVS OTP %d ROW: 0x%x.0x%x\n",
+ offset/WORD_SIZE, buf[1], buf[0]);
+
+ /* get voltage readings from AVS OTP bits */
+ avs_bits = GET_BITS(SWREG_OTP_BITS_START,
+ SWREG_OTP_BITS_END,
+ buf[1]);
+
+ /* check for valid otp bits */
+ if (GET_BITS(SWREG_VALID_BIT_START, SWREG_VALID_BIT_END, avs_bits) !=
+ SWREG_VALID_BITS) {
+ WARN("Invalid AVS OTP bits at %d row\n", offset/WORD_SIZE);
+ return;
+ }
+
+ /* get ihost and vddc step value */
+ vddc_step = GET_BITS(SWREG_VDDC_FIELD_START,
+ SWREG_VDDC_FIELD_END,
+ avs_bits);
+
+ ihost_step = GET_BITS(SWREG_IHOST_FIELD_START,
+ SWREG_IHOST_FIELD_END,
+ avs_bits);
+
+ if ((ihost_step > MVOLT_STEP_MAX) || (vddc_step > MVOLT_STEP_MAX)) {
+ WARN("OTP entry invalid\n");
+ return;
+ }
+
+ /* get voltage in micro-volts */
+ *ihost_uvolts = STEP_TO_UVOLTS(ihost_step);
+ *vddc_uvolts = STEP_TO_UVOLTS(vddc_step);
+}
+
+/*
+ * This api reads otp bits and program internal swreg's - ihos12, ihost03,
+ * vddc_core and ddr_core based on different chip. External swreg's
+ * programming will be done from crmu.
+ *
+ * For A2 chip:
+ * Read OTP row 20, bit 50. This bit will be set for A2 chip. Once A2 chip is
+ * found, read AVS OTP row 13, 12bits[55:44], if valid otp bits are found
+ * then set ihost and vddc according to avs otp bits else set them to 0.94v
+ * and 0.91v respectively. Also update the firmware after setting voltage.
+ *
+ * For B0 chip:
+ * Read OTP row 13, bit 56. This bit will be set for B0 chip. Once B0 chip is
+ * found then set ihost and vddc to 0.95v and ddr_core to 1v. No AVS OTP bits
+ * are used get ihost/vddc voltages.
+ *
+ * For B1 chip:
+ * Read AVS OTP row 13, 12bits[55:44], if valid otp bits are found then set
+ * ihost and vddc according to avs otp bits else set them to 0.94v and 0.91v
+ * respectively.
+ */
+void set_swreg_based_on_otp(void)
+{
+ /* default voltage if no valid OTP */
+ uint32_t vddc_uvolts = VDDC_CORE_DEF_VOLT;
+ uint32_t ihost_uvolts = IHOST_DEF_VOLT;
+ uint32_t ddrc_uvolts;
+ uint32_t offset;
+ uint32_t buf[2];
+
+ offset = SWREG_AVS_OTP_OFFSET;
+ if (bcm_otpc_read(offset, &buf[0], BYTES_TO_READ, 1) == -1)
+ return;
+
+ VERBOSE("OTP %d ROW: 0x%x.0x%x\n",
+ offset/WORD_SIZE, buf[1], buf[0]);
+
+ if (IS_SR_B0(buf[1])) {
+ /* don't read AVS OTP for B0 */
+ ihost_uvolts = B0_IHOST_DEF_VOLT;
+ vddc_uvolts = B0_VDDC_CORE_DEF_VOLT;
+ ddrc_uvolts = B0_DDR_VDDC_DEF_VOLT;
+ } else {
+ read_avs_otp_bits(&ihost_uvolts, &vddc_uvolts);
+ }
+
+#if (IHOST_REG_TYPE == IHOST_REG_INTEGRATED) && \
+ (VDDC_REG_TYPE == VDDC_REG_INTEGRATED)
+ /* enable IHOST12 cluster before changing voltage */
+ NOTICE("Switching on the Regulator idx: %u\n",
+ SWREG_IHOST1_DIS);
+ mmio_clrsetbits_32(CRMU_SWREG_CTRL_ADDR,
+ BIT(SWREG_IHOST1_DIS),
+ BIT(SWREG_IHOST1_REG_RESETB));
+
+ /* wait for regulator supply gets stable */
+ while (!(mmio_read_32(CRMU_SWREG_STATUS_ADDR) &
+ (1 << SWREG_IHOST1_PMU_STABLE)))
+ ;
+
+ INFO("Regulator supply got stable\n");
+
+#ifndef DEFAULT_SWREG_CONFIG
+ swreg_firmware_update();
+#endif
+
+ set_ihost_vddc_swreg(ihost_uvolts, vddc_uvolts);
+#endif
+ if (IS_SR_B0(buf[1])) {
+ NOTICE("ddrc_uvolts: %duv\n", ddrc_uvolts);
+ set_swreg(DDR_VDDC, ddrc_uvolts);
+ }
+}
+
+#ifdef USE_DDR
+static struct ddr_info ddr_info;
+#endif
+#ifdef USE_FRU
+static struct fru_area_info fru_area[FRU_MAX_NR_AREAS];
+static struct fru_board_info board_info;
+static struct fru_time fru_tm;
+static uint8_t fru_tbl[BCM_MAX_FRU_LEN];
+
+static void board_detect_fru(void)
+{
+ uint32_t i, result;
+ int ret = -1;
+
+ result = bcm_emmc_init(false);
+ if (!result) {
+ ERROR("eMMC init failed\n");
+ return;
+ }
+
+ /* go through eMMC boot partitions looking for FRU table */
+ for (i = EMMC_BOOT_PARTITION1; i <= EMMC_BOOT_PARTITION2; i++) {
+ result = emmc_partition_select(i);
+ if (!result) {
+ ERROR("Switching to eMMC part %u failed\n", i);
+ return;
+ }
+
+ result = emmc_read(BCM_FRU_TBL_OFFSET, (uintptr_t)fru_tbl,
+ BCM_MAX_FRU_LEN, BCM_MAX_FRU_LEN);
+ if (!result) {
+ ERROR("Failed to read from eMMC part %u\n", i);
+ return;
+ }
+
+ /*
+ * Run sanity check and checksum to make sure valid FRU table
+ * is detected
+ */
+ ret = fru_validate(fru_tbl, fru_area);
+ if (ret < 0) {
+ WARN("FRU table not found in eMMC part %u\n", i);
+ continue;
+ }
+
+ /* parse DDR information from FRU table */
+ ret = fru_parse_ddr(fru_tbl, &fru_area[FRU_AREA_INTERNAL],
+ &ddr_info);
+ if (ret < 0) {
+ WARN("No FRU DDR info found in eMMC part %u\n", i);
+ continue;
+ }
+
+ /* parse board information from FRU table */
+ ret = fru_parse_board(fru_tbl, &fru_area[FRU_AREA_BOARD_INFO],
+ &board_info);
+ if (ret < 0) {
+ WARN("No FRU board info found in eMMC part %u\n", i);
+ continue;
+ }
+
+ /* if we reach here, valid FRU table is parsed */
+ break;
+ }
+
+ if (ret < 0) {
+ WARN("FRU table missing for this board\n");
+ return;
+ }
+
+ for (i = 0; i < BCM_MAX_NR_DDR; i++) {
+ INFO("DDR channel index: %d\n", ddr_info.mcb[i].idx);
+ INFO("DDR size %u GB\n", ddr_info.mcb[i].size_mb / 1024);
+ INFO("DDR ref ID by SW (Not MCB Ref ID) 0x%x\n",
+ ddr_info.mcb[i].ref_id);
+ }
+
+ fru_format_time(board_info.mfg_date, &fru_tm);
+
+ INFO("**** FRU board information ****\n");
+ INFO("Language 0x%x\n", board_info.lang);
+ INFO("Manufacturing Date %u.%02u.%02u, %02u:%02u\n",
+ fru_tm.year, fru_tm.month, fru_tm.day,
+ fru_tm.hour, fru_tm.min);
+ INFO("Manufacturing Date(Raw) 0x%x\n", board_info.mfg_date);
+ INFO("Manufacturer %s\n", board_info.manufacturer);
+ INFO("Product Name %s\n", board_info.product_name);
+ INFO("Serial number %s\n", board_info.serial_number);
+ INFO("Part number %s\n", board_info.part_number);
+ INFO("File ID %s\n", board_info.file_id);
+}
+#endif /* USE_FRU */
+
+#ifdef USE_GPIO
+
+#define INVALID_GPIO 0xffff
+
+static const int gpio_cfg_bitmap[MAX_NR_GPIOS] = {
+#ifdef BRD_DETECT_GPIO_BIT0
+ BRD_DETECT_GPIO_BIT0,
+#else
+ INVALID_GPIO,
+#endif
+#ifdef BRD_DETECT_GPIO_BIT1
+ BRD_DETECT_GPIO_BIT1,
+#else
+ INVALID_GPIO,
+#endif
+#ifdef BRD_DETECT_GPIO_BIT2
+ BRD_DETECT_GPIO_BIT2,
+#else
+ INVALID_GPIO,
+#endif
+#ifdef BRD_DETECT_GPIO_BIT3
+ BRD_DETECT_GPIO_BIT3,
+#else
+ INVALID_GPIO,
+#endif
+};
+
+static uint8_t gpio_bitmap;
+
+/*
+ * Use an odd number to avoid potential conflict with public GPIO level
+ * defines
+ */
+#define GPIO_STATE_FLOAT 15
+
+/*
+ * If GPIO_SUPPORT_FLOAT_DETECTION is disabled, simply return GPIO level
+ *
+ * If GPIO_SUPPORT_FLOAT_DETECTION is enabled, add additional test for possible
+ * pin floating (unconnected) scenario. This support is assuming externally
+ * applied pull up / pull down will have a stronger pull than the internal pull
+ * up / pull down.
+ */
+static uint8_t gpio_get_state(int gpio)
+{
+ uint8_t val;
+
+ /* set direction to GPIO input */
+ gpio_set_direction(gpio, GPIO_DIR_IN);
+
+#ifndef GPIO_SUPPORT_FLOAT_DETECTION
+ if (gpio_get_value(gpio) == GPIO_LEVEL_HIGH)
+ val = GPIO_LEVEL_HIGH;
+ else
+ val = GPIO_LEVEL_LOW;
+
+ return val;
+#else
+ /*
+ * Enable internal pull down. If GPIO level is still high, there must
+ * be an external pull up
+ */
+ gpio_set_pull(gpio, GPIO_PULL_DOWN);
+ if (gpio_get_value(gpio) == GPIO_LEVEL_HIGH) {
+ val = GPIO_LEVEL_HIGH;
+ goto exit;
+ }
+
+ /*
+ * Enable internal pull up. If GPIO level is still low, there must
+ * be an external pull down
+ */
+ gpio_set_pull(gpio, GPIO_PULL_UP);
+ if (gpio_get_value(gpio) == GPIO_LEVEL_LOW) {
+ val = GPIO_LEVEL_LOW;
+ goto exit;
+ }
+
+ /* if reached here, the pin must be not connected */
+ val = GPIO_STATE_FLOAT;
+
+exit:
+ /* make sure internall pull is disabled */
+ if (gpio_get_pull(gpio) != GPIO_PULL_NONE)
+ gpio_set_pull(gpio, GPIO_PULL_NONE);
+
+ return val;
+#endif
+}
+
+static void board_detect_gpio(void)
+{
+ unsigned int i, val;
+ int gpio;
+
+ iproc_gpio_init(IPROC_GPIO_S_BASE, IPROC_GPIO_NR,
+ IPROC_IOPAD_MODE_BASE, HSLS_IOPAD_BASE);
+
+ gpio_bitmap = 0;
+ for (i = 0; i < MAX_NR_GPIOS; i++) {
+ if (gpio_cfg_bitmap[i] == INVALID_GPIO)
+ continue;
+
+ /*
+ * Construct the bitmap based on GPIO value. Floating pin
+ * detection is a special case. As soon as a floating pin is
+ * detected, a special value of MAX_GPIO_BITMAP_VAL is
+ * assigned and we break out of the loop immediately
+ */
+ gpio = gpio_cfg_bitmap[i];
+ val = gpio_get_state(gpio);
+ if (val == GPIO_STATE_FLOAT) {
+ gpio_bitmap = MAX_GPIO_BITMAP_VAL;
+ break;
+ }
+
+ if (val == GPIO_LEVEL_HIGH)
+ gpio_bitmap |= BIT(i);
+ }
+
+ memcpy(&ddr_info, &gpio_ddr_info[gpio_bitmap], sizeof(ddr_info));
+ INFO("Board detection GPIO bitmap = 0x%x\n", gpio_bitmap);
+}
+#endif /* USE_GPIO */
+
+static void bcm_board_detect(void)
+{
+#ifdef DDR_LEGACY_MCB_SUPPORTED
+ /* Loading default DDR info */
+ memcpy(&ddr_info, &default_ddr_info, sizeof(ddr_info));
+#endif
+#ifdef USE_FRU
+ board_detect_fru();
+#endif
+#ifdef USE_GPIO
+ board_detect_gpio();
+#endif
+}
+
+static void dump_persistent_regs(void)
+{
+ NOTICE("pr0: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG0));
+ NOTICE("pr1: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG1));
+ NOTICE("pr2: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG2));
+ NOTICE("pr3: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG3));
+ NOTICE("pr4: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG4));
+ NOTICE("pr5: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG5));
+ NOTICE("pr6: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG6));
+ NOTICE("pr7: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG7));
+ NOTICE("pr8: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG8));
+ NOTICE("pr9: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG9));
+ NOTICE("pr10: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG10));
+ NOTICE("pr11: %x\n", mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG11));
+}
+
+void plat_bcm_bl2_plat_arch_setup(void)
+{
+ if (chip_get_rev_id_major() == CHIP_REV_MAJOR_AX) {
+ if (!(sotp_mem_read(SOTP_ATF_CFG_ROW_ID, SOTP_ROW_NO_ECC) &
+ SOTP_ATF_WATCHDOG_ENABLE_MASK)) {
+ /*
+ * Stop sp805 watchdog timer immediately.
+ * It might has been set up by MCU patch earlier for
+ * eMMC workaround.
+ *
+ * Note the watchdog timer started in CRMU has a very
+ * short timeout and needs to be stopped immediately.
+ * Down below we restart it with a much longer timeout
+ * for BL2 and BL31
+ */
+ sp805_stop(ARM_SP805_TWDG_BASE);
+ }
+ }
+
+#if !BRCM_DISABLE_TRUSTED_WDOG
+ /*
+ * start secure watchdog for BL2 and BL31.
+ * Note that UART download can take a longer time,
+ * so do not allow watchdog for UART download,
+ * as this boot source is not a standard modus operandi.
+ */
+ if (boot_source_get() != BOOT_SOURCE_UART)
+ sp805_start(ARM_SP805_TWDG_BASE, ARM_TWDG_LOAD_VAL);
+#endif
+
+#ifdef BCM_ELOG
+ /* Ensure logging is started out fresh in BL2. */
+ mmio_write_32(BCM_ELOG_BL2_BASE, 0);
+#endif
+ /*
+ * In BL2, since we have very limited space to store logs, we only
+ * save logs that are >= the WARNING level.
+ */
+ bcm_elog_init((void *)BCM_ELOG_BL2_BASE, BCM_ELOG_BL2_SIZE,
+ LOG_LEVEL_WARNING);
+
+ dump_persistent_regs();
+
+ /* Read CRMU mailbox 0 */
+ NOTICE("RESET (reported by CRMU): 0x%x\n",
+ mmio_read_32(CRMU_READ_MAIL_BOX0));
+
+ /*
+ * All non-boot-source PADs are in forced input-mode at
+ * reset so clear the force on non-boot-source PADs using
+ * CDRU register.
+ */
+ mmio_clrbits_32((uintptr_t)CDRU_CHIP_IO_PAD_CONTROL,
+ (1 << CDRU_CHIP_IO_PAD_CONTROL__CDRU_IOMUX_FORCE_PAD_IN_R));
+
+#if DRIVER_OCOTP_ENABLE
+ bcm_otpc_init(&otp_stingray_map);
+#endif
+
+ set_swreg_based_on_otp();
+
+#if IHOST_PLL_FREQ != 0
+ bcm_set_ihost_pll_freq(0x0, IHOST_PLL_FREQ);
+#endif
+
+#ifdef INCLUDE_EMMC_DRIVER_ERASE_CODE
+ /* The erasable unit of the eMMC is the "Erase Group";
+ * Erase group is measured in write blocks which are the
+ * basic writable units of the Device.
+ * The size of the Erase Group is a Device specific parameter
+ */
+ emmc_erase(EMMC_ERASE_START_BLOCK, EMMC_ERASE_BLOCK_COUNT,
+ EMMC_ERASE_PARTITION);
+#endif
+
+ bcm_board_detect();
+#ifdef DRIVER_EMMC_ENABLE
+ /* Initialize the card, if it is not */
+ if (bcm_emmc_init(true) == 0)
+ WARN("eMMC Card Initialization Failed!!!\n");
+#endif
+
+#if BL2_TEST_I2C
+ i2c_test();
+#endif
+
+#ifdef USE_DDR
+ ddr_initialize(&ddr_info);
+
+ ddr_secure_region_config(SECURE_DDR_BASE_ADDRESS,
+ SECURE_DDR_END_ADDRESS);
+#ifdef NITRO_SECURE_ACCESS
+ ddr_secure_region_config(DDR_NITRO_SECURE_REGION_START,
+ DDR_NITRO_SECURE_REGION_END);
+#endif
+#else
+ ext_sram_init();
+#endif
+
+#if BL2_TEST_MEM
+ ddr_test();
+#endif
+
+#ifdef USE_NAND
+ brcm_stingray_nand_init();
+#endif
+
+#if defined(USE_PAXB) || defined(USE_PAXC) || defined(USE_SATA)
+ brcm_stingray_pcie_reset();
+#endif
+
+#ifdef USE_PAXC
+ if (boot_source_get() != BOOT_SOURCE_QSPI)
+ brcm_stingray_chimp_check_and_fastboot();
+#endif
+
+#if ((!CLEAN_DDR || MMU_DISABLED))
+ /*
+ * Now DDR has been initialized. We want to copy all the logs in SRAM
+ * into DDR so we will have much more space to store the logs in the
+ * next boot stage
+ */
+ bcm_elog_copy_log((void *)BCM_ELOG_BL31_BASE,
+ MIN(BCM_ELOG_BL2_SIZE, BCM_ELOG_BL31_SIZE)
+ );
+
+ /*
+ * We are not yet at the end of BL2, but we can stop log here so we do
+ * not need to add 'bcm_elog_exit' to the standard BL2 code. The
+ * benefit of capturing BL2 logs after this is very minimal in a
+ * production system
+ * NOTE: BL2 logging must be exited before going forward to setup
+ * page tables
+ */
+ bcm_elog_exit();
+#endif
+}
diff --git a/plat/brcm/board/stingray/src/bl31_setup.c b/plat/brcm/board/stingray/src/bl31_setup.c
new file mode 100644
index 0000000..04df6a0
--- /dev/null
+++ b/plat/brcm/board/stingray/src/bl31_setup.c
@@ -0,0 +1,1071 @@
+/*
+ * Copyright (c) 2015 - 2021, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <cortex_a72.h>
+#include <drivers/arm/sp805.h>
+#include <drivers/console.h>
+#include <drivers/delay_timer.h>
+#include <drivers/ti/uart/uart_16550.h>
+#include <lib/mmio.h>
+#include <lib/utils_def.h>
+#include <plat/common/common_def.h>
+#include <plat/common/platform.h>
+
+#include <bl33_info.h>
+#include <chimp.h>
+#include <cmn_plat_util.h>
+#include <dmu.h>
+#include <fsx.h>
+#include <iommu.h>
+#include <ncsi.h>
+#include <paxb.h>
+#include <paxc.h>
+#include <platform_def.h>
+#ifdef USE_USB
+#include <platform_usb.h>
+#endif
+#include <sdio.h>
+#include <sr_utils.h>
+#include <timer_sync.h>
+
+/*******************************************************************************
+ * Perform any BL3-1 platform setup common to ARM standard platforms
+ ******************************************************************************/
+
+static void brcm_stingray_gain_qspi_control(void)
+{
+ if (boot_source_get() != BOOT_SOURCE_QSPI) {
+ if (bcm_chimp_is_nic_mode() &&
+ (!bcm_chimp_handshake_done())) {
+ /*
+ * Last chance to wait for ChiMP firmware to report
+ * "I am done" before grabbing the QSPI
+ */
+ WARN("ChiMP still not booted\n");
+#ifndef CHIMP_ALWAYS_NEEDS_QSPI
+ WARN("ChiMP is given the last chance to boot (%d s)\n",
+ CHIMP_HANDSHAKE_TIMEOUT_MS / 1000);
+
+ if (!bcm_chimp_wait_handshake()) {
+ ERROR("ChiMP failed to boot\n");
+ } else {
+ INFO("ChiMP booted successfully\n");
+ }
+#endif
+ }
+
+#ifndef CHIMP_ALWAYS_NEEDS_QSPI
+ INFO("AP grabs QSPI\n");
+ /*
+ * For QSPI boot sbl/bl1 has already taken care.
+ * For other boot sources QSPI needs to be muxed to
+ * AP for exclusive use
+ */
+ brcm_stingray_set_qspi_mux(1);
+ INFO("AP (bl31) gained control over QSPI\n");
+#endif
+ }
+}
+
+static void brcm_stingray_dma_pl330_init(void)
+{
+ unsigned int val;
+
+ VERBOSE("dma pl330 init start\n");
+
+ /* Set DMAC boot_manager_ns = 0x1 */
+ VERBOSE(" - configure boot security state\n");
+ mmio_setbits_32(DMAC_M0_IDM_IO_CONTROL_DIRECT, BOOT_MANAGER_NS);
+ /* Set boot_peripheral_ns[n:0] = 0xffffffff */
+ mmio_write_32(ICFG_DMAC_CONFIG_2, BOOT_PERIPHERAL_NS);
+ /* Set boot_irq_ns[n:0] = 0x0000ffff */
+ mmio_write_32(ICFG_DMAC_CONFIG_3, BOOT_IRQ_NS);
+
+ /* Set DMAC stream_id */
+ VERBOSE(" - configure stream_id = 0x6000\n");
+ val = (DMAC_STREAM_ID << DMAC_SID_SHIFT);
+ mmio_write_32(ICFG_DMAC_SID_ARADDR_CONTROL, val);
+ mmio_write_32(ICFG_DMAC_SID_AWADDR_CONTROL, val);
+
+ /* Reset DMAC */
+ VERBOSE(" - reset dma pl330\n");
+
+ mmio_setbits_32(DMAC_M0_IDM_RESET_CONTROL, 0x1);
+ udelay(500);
+
+ mmio_clrbits_32(DMAC_M0_IDM_RESET_CONTROL, 0x1);
+ udelay(500);
+
+ INFO("dma pl330 init done\n");
+}
+
+static void brcm_stingray_spi_pl022_init(uintptr_t idm_reset_control)
+{
+ VERBOSE("spi pl022 init start\n");
+
+ /* Reset APB SPI bridge */
+ VERBOSE(" - reset apb spi bridge\n");
+ mmio_setbits_32(idm_reset_control, 0x1);
+ udelay(500);
+
+ mmio_clrbits_32(idm_reset_control, 0x1);
+ udelay(500);
+
+ INFO("spi pl022 init done\n");
+}
+
+#define CDRU_SATA_RESET_N \
+ BIT(CDRU_MISC_RESET_CONTROL__CDRU_SATA_RESET_N_R)
+#define CDRU_MISC_CLK_SATA \
+ BIT(CDRU_MISC_CLK_ENABLE_CONTROL__CDRU_SATA_CLK_EN_R)
+#define CCN_CONFIG_CLK_ENABLE (1 << 2)
+#define MMU_CONFIG_CLK_ENABLE (0x3F << 16)
+
+#define SATA_SATA_TOP_CTRL_BUS_CTRL (SATA_BASE + 0x2044)
+#define DMA_BIT_CTRL_MASK 0x003
+#define DMA_DESCR_ENDIAN_CTRL (DMA_BIT_CTRL_MASK << 0x002)
+#define DMA_DATA_ENDIAN_CTRL (DMA_BIT_CTRL_MASK << 0x004)
+
+#define SATA_PORT_SATA3_PCB_REG8 (SATA_BASE + 0x2320)
+#define SATA_PORT_SATA3_PCB_REG11 (SATA_BASE + 0x232c)
+#define SATA_PORT_SATA3_PCB_BLOCK_ADDR (SATA_BASE + 0x233c)
+
+#define SATA3_AFE_TXRX_ACTRL 0x1d0
+/* TXDriver swing setting is 800mV */
+#define DFS_SWINGNOPE_VALUE (0x0 << 6)
+#define DFS_SWINGNOPE_MASK (0x3 << 6)
+
+#define DFS_SWINGPE_VALUE (0x1 << 4)
+#define DFS_SWINGPE_MASK (0x3 << 4)
+
+#define DFS_INJSTRENGTH_VALUE (0x0 << 4)
+#define DFS_INJSTRENGTH_MASK (0x3 << 4)
+
+#define DFS_INJEN (0x1 << 3)
+
+#define SATA_CORE_MEM_CTRL (SATA_BASE + 0x3a08)
+#define SATA_CORE_MEM_CTRL_ISO BIT(0)
+#define SATA_CORE_MEM_CTRL_ARRPOWEROKIN BIT(1)
+#define SATA_CORE_MEM_CTRL_ARRPOWERONIN BIT(2)
+#define SATA_CORE_MEM_CTRL_POWEROKIN BIT(3)
+#define SATA_CORE_MEM_CTRL_POWERONIN BIT(4)
+
+#define SATA0_IDM_RESET_CONTROL (SATA_BASE + 0x500800)
+#define SATA_APBT0_IDM_IO_CONTROL_DIRECT (SATA_BASE + 0x51a408)
+#define IO_CONTROL_DIRECT_CLK_ENABLE BIT(0)
+#define SATA_APBT0_IDM_RESET_CONTROL (SATA_BASE + 0x51a800)
+#define IDM_RESET_CONTROL_RESET BIT(0)
+
+#define NIC400_SATA_NOC_SECURITY1 0x6830000c
+#define SATA_NOC_SECURITY1_FIELD 0xf
+#define NIC400_SATA_NOC_SECURITY2 0x68300010
+#define SATA_NOC_SECURITY2_FIELD 0xf
+#define NIC400_SATA_NOC_SECURITY3 0x68300014
+#define SATA_NOC_SECURITY3_FIELD 0x1
+#define NIC400_SATA_NOC_SECURITY4 0x68300018
+#define SATA_NOC_SECURITY4_FIELD 0x1
+#define NIC400_SATA_NOC_SECURITY5 0x6830001c
+#define SATA_NOC_SECURITY5_FIELD 0xf
+#define NIC400_SATA_NOC_SECURITY6 0x68300020
+#define SATA_NOC_SECURITY6_FIELD 0x1
+#define NIC400_SATA_NOC_SECURITY7 0x68300024
+#define SATA_NOC_SECURITY7_FIELD 0xf
+#define NIC400_SATA_NOC_SECURITY8 0x68300028
+#define SATA_NOC_SECURITY8_FIELD 0xf
+#define NIC400_SATA_NOC_SECURITY9 0x6830002c
+#define SATA_NOC_SECURITY9_FIELD 0x1
+
+#define SATA_APBT_IDM_PORT_REG(port, reg) \
+ (((port/4) << 12) + reg)
+
+#define SATA_IDM_PORT_REG(port, reg) ((port << 12) + reg)
+
+#define SATA_PORT_REG(port, reg) \
+ (((port%4) << 16) + ((port/4) << 20) + reg)
+
+#define MAX_SATA_PORTS 8
+#define USE_SATA_PORTS 8
+
+#ifdef USE_SATA
+static const uint8_t sr_b0_sata_port[MAX_SATA_PORTS] = {
+ 0, 1, 2, 3, 4, 5, 6, 7
+};
+
+static uint32_t brcm_stingray_get_sata_port(unsigned int port)
+{
+ return sr_b0_sata_port[port];
+}
+
+static void brcm_stingray_sata_init(void)
+{
+ unsigned int port = 0;
+ uint32_t sata_port;
+
+ mmio_setbits_32(CDRU_MISC_CLK_ENABLE_CONTROL,
+ CDRU_MISC_CLK_SATA);
+
+ mmio_clrbits_32(CDRU_MISC_RESET_CONTROL, CDRU_SATA_RESET_N);
+ mmio_setbits_32(CDRU_MISC_RESET_CONTROL, CDRU_SATA_RESET_N);
+
+ for (port = 0; port < USE_SATA_PORTS; port++) {
+
+ sata_port = brcm_stingray_get_sata_port(port);
+ mmio_write_32(SATA_APBT_IDM_PORT_REG(sata_port,
+ SATA_APBT0_IDM_RESET_CONTROL),
+ 0x0);
+ mmio_setbits_32(SATA_APBT_IDM_PORT_REG(sata_port,
+ SATA_APBT0_IDM_IO_CONTROL_DIRECT),
+ IO_CONTROL_DIRECT_CLK_ENABLE);
+ mmio_write_32(SATA_IDM_PORT_REG(sata_port,
+ SATA0_IDM_RESET_CONTROL),
+ 0x0);
+
+ mmio_setbits_32(SATA_PORT_REG(sata_port, SATA_CORE_MEM_CTRL),
+ SATA_CORE_MEM_CTRL_ARRPOWERONIN);
+ mmio_setbits_32(SATA_PORT_REG(sata_port, SATA_CORE_MEM_CTRL),
+ SATA_CORE_MEM_CTRL_ARRPOWEROKIN);
+ mmio_setbits_32(SATA_PORT_REG(sata_port, SATA_CORE_MEM_CTRL),
+ SATA_CORE_MEM_CTRL_POWERONIN);
+ mmio_setbits_32(SATA_PORT_REG(sata_port, SATA_CORE_MEM_CTRL),
+ SATA_CORE_MEM_CTRL_POWEROKIN);
+ mmio_clrbits_32(SATA_PORT_REG(sata_port, SATA_CORE_MEM_CTRL),
+ SATA_CORE_MEM_CTRL_ISO);
+
+ mmio_clrbits_32(SATA_PORT_REG(sata_port,
+ SATA_SATA_TOP_CTRL_BUS_CTRL),
+ (DMA_DESCR_ENDIAN_CTRL | DMA_DATA_ENDIAN_CTRL));
+ }
+
+ mmio_setbits_32(NIC400_SATA_NOC_SECURITY1, SATA_NOC_SECURITY1_FIELD);
+ mmio_setbits_32(NIC400_SATA_NOC_SECURITY2, SATA_NOC_SECURITY2_FIELD);
+ mmio_setbits_32(NIC400_SATA_NOC_SECURITY3, SATA_NOC_SECURITY3_FIELD);
+ mmio_setbits_32(NIC400_SATA_NOC_SECURITY4, SATA_NOC_SECURITY4_FIELD);
+ mmio_setbits_32(NIC400_SATA_NOC_SECURITY5, SATA_NOC_SECURITY5_FIELD);
+ mmio_setbits_32(NIC400_SATA_NOC_SECURITY6, SATA_NOC_SECURITY6_FIELD);
+ mmio_setbits_32(NIC400_SATA_NOC_SECURITY7, SATA_NOC_SECURITY7_FIELD);
+ mmio_setbits_32(NIC400_SATA_NOC_SECURITY8, SATA_NOC_SECURITY8_FIELD);
+ mmio_setbits_32(NIC400_SATA_NOC_SECURITY9, SATA_NOC_SECURITY9_FIELD);
+
+ INFO("sata init done\n");
+}
+#else
+static void poweroff_sata_pll(void)
+{
+ /*
+ * SATA subsystem is clocked by LCPLL0 which is enabled by
+ * default by bootrom. Poweroff the PLL if SATA is not used
+ */
+
+ /* enable isolation */
+ mmio_setbits_32(CRMU_AON_CTRL1,
+ BIT(CRMU_AON_CTRL1__LCPLL0_ISO_IN));
+
+ /* Power off the SATA PLL/LDO */
+ mmio_clrbits_32(CRMU_AON_CTRL1,
+ (BIT(CRMU_AON_CTRL1__LCPLL0_PWRON_LDO) |
+ BIT(CRMU_AON_CTRL1__LCPLL0_PWR_ON)));
+}
+#endif
+
+#ifdef USE_AMAC
+#ifdef EMULATION_SETUP
+#define ICFG_AMAC_STRAP_CONFIG (HSLS_ICFG_REGS_BASE + 0xa5c)
+#define ICFG_AMAC_STRAP_DLL_BYPASS (1 << 2)
+#endif
+#define ICFG_AMAC_MAC_CTRL_REG (HSLS_ICFG_REGS_BASE + 0xa6c)
+#define ICFG_AMAC_MAC_FULL_DUPLEX (1 << 1)
+#define ICFG_AMAC_RGMII_PHY_CONFIG (HSLS_ICFG_REGS_BASE + 0xa60)
+#define ICFG_AMAC_SID_CONTROL (HSLS_ICFG_REGS_BASE + 0xb10)
+#define ICFG_AMAC_SID_SHIFT 5
+#define ICFG_AMAC_SID_AWADDR_OFFSET 0x0
+#define ICFG_AMAC_SID_ARADDR_OFFSET 0x4
+#define AMAC_RPHY_1000_DATARATE (1 << 20)
+#define AMAC_RPHY_FULL_DUPLEX (1 << 5)
+#define AMAC_RPHY_SPEED_OFFSET 2
+#define AMAC_RPHY_SPEED_MASK (7 << AMAC_RPHY_SPEED_OFFSET)
+#define AMAC_RPHY_1G_SPEED (2 << AMAC_RPHY_SPEED_OFFSET)
+#define ICFG_AMAC_MEM_PWR_CTRL (HSLS_ICFG_REGS_BASE + 0xa68)
+#define AMAC_ISO BIT(9)
+#define AMAC_STDBY BIT(8)
+#define AMAC_ARRPOWEROKIN BIT(7)
+#define AMAC_ARRPOWERONIN BIT(6)
+#define AMAC_POWEROKIN BIT(5)
+#define AMAC_POWERONIN BIT(4)
+
+#define AMAC_IDM0_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x4408)
+#define AMAC_IDM0_ARCACHE_OFFSET 16
+#define AMAC_IDM0_AWCACHE_OFFSET 7
+#define AMAC_IDM0_ARCACHE_MASK (0xF << AMAC_IDM0_ARCACHE_OFFSET)
+#define AMAC_IDM0_AWCACHE_MASK (0xF << AMAC_IDM0_AWCACHE_OFFSET)
+/* ARCACHE - AWCACHE is 0xB7 for write-back no allocate */
+#define AMAC_IDM0_ARCACHE_VAL (0xb << AMAC_IDM0_ARCACHE_OFFSET)
+#define AMAC_IDM0_AWCACHE_VAL (0x7 << AMAC_IDM0_AWCACHE_OFFSET)
+
+static void brcm_stingray_amac_init(void)
+{
+ unsigned int val;
+ uintptr_t icfg_amac_sid = ICFG_AMAC_SID_CONTROL;
+
+ VERBOSE("amac init start\n");
+
+ val = SR_SID_VAL(0x3, 0x0, 0x4) << ICFG_AMAC_SID_SHIFT;
+ mmio_write_32(icfg_amac_sid + ICFG_AMAC_SID_AWADDR_OFFSET, val);
+ mmio_write_32(icfg_amac_sid + ICFG_AMAC_SID_ARADDR_OFFSET, val);
+
+ mmio_setbits_32(ICFG_AMAC_MEM_PWR_CTRL, AMAC_ARRPOWEROKIN);
+ mmio_setbits_32(ICFG_AMAC_MEM_PWR_CTRL, AMAC_ARRPOWERONIN);
+ mmio_setbits_32(ICFG_AMAC_MEM_PWR_CTRL, AMAC_POWEROKIN);
+ mmio_setbits_32(ICFG_AMAC_MEM_PWR_CTRL, AMAC_POWERONIN);
+ mmio_clrbits_32(ICFG_AMAC_MEM_PWR_CTRL, AMAC_ISO);
+ mmio_write_32(APBR_IDM_RESET_CONTROL, 0x0);
+ mmio_clrsetbits_32(ICFG_AMAC_RGMII_PHY_CONFIG, AMAC_RPHY_SPEED_MASK,
+ AMAC_RPHY_1G_SPEED); /*1 Gbps line rate*/
+ /* 1000 datarate set */
+ mmio_setbits_32(ICFG_AMAC_RGMII_PHY_CONFIG, AMAC_RPHY_1000_DATARATE);
+ /* full duplex */
+ mmio_setbits_32(ICFG_AMAC_RGMII_PHY_CONFIG, AMAC_RPHY_FULL_DUPLEX);
+#ifdef EMULATION_SETUP
+ /* DLL bypass */
+ mmio_setbits_32(ICFG_AMAC_STRAP_CONFIG, ICFG_AMAC_STRAP_DLL_BYPASS);
+#endif
+ /* serdes full duplex */
+ mmio_setbits_32(ICFG_AMAC_MAC_CTRL_REG, ICFG_AMAC_MAC_FULL_DUPLEX);
+ mmio_clrsetbits_32(AMAC_IDM0_IO_CONTROL_DIRECT, AMAC_IDM0_ARCACHE_MASK,
+ AMAC_IDM0_ARCACHE_VAL);
+ mmio_clrsetbits_32(AMAC_IDM0_IO_CONTROL_DIRECT, AMAC_IDM0_AWCACHE_MASK,
+ AMAC_IDM0_AWCACHE_VAL);
+ INFO("amac init done\n");
+}
+#endif /* USE_AMAC */
+
+static void brcm_stingray_pka_meminit(void)
+{
+ uintptr_t icfg_mem_ctrl = ICFG_PKA_MEM_PWR_CTRL;
+
+ VERBOSE("pka meminit start\n");
+
+ VERBOSE(" - arrpoweron\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONOUT))
+ ;
+
+ VERBOSE(" - arrpowerok\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKOUT))
+ ;
+
+ VERBOSE(" - poweron\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_PKA_MEM_PWR_CTRL__POWERONIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_PKA_MEM_PWR_CTRL__POWERONOUT))
+ ;
+
+ VERBOSE(" - powerok\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_PKA_MEM_PWR_CTRL__POWEROKIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_PKA_MEM_PWR_CTRL__POWEROKOUT))
+ ;
+
+ /* Wait sometime */
+ mdelay(1);
+
+ VERBOSE(" - remove isolation\n");
+ mmio_clrbits_32(icfg_mem_ctrl, ICFG_PKA_MEM_PWR_CTRL__ISO);
+
+ INFO("pka meminit done\n");
+}
+
+static void brcm_stingray_smmu_init(void)
+{
+ unsigned int val;
+ uintptr_t smmu_base = SMMU_BASE;
+
+ VERBOSE("smmu init start\n");
+
+ /* Configure SCR0 */
+ VERBOSE(" - configure scr0\n");
+ val = mmio_read_32(smmu_base + 0x0);
+ val |= (0x1 << 12);
+ mmio_write_32(smmu_base + 0x0, val);
+
+ /* Reserve context banks for secure masters */
+ arm_smmu_reserve_secure_cntxt();
+
+ /* Print configuration */
+ VERBOSE(" - scr0=0x%x scr1=0x%x scr2=0x%x\n",
+ mmio_read_32(smmu_base + 0x0),
+ mmio_read_32(smmu_base + 0x4),
+ mmio_read_32(smmu_base + 0x8));
+
+ VERBOSE(" - idr0=0x%x idr1=0x%x idr2=0x%x\n",
+ mmio_read_32(smmu_base + 0x20),
+ mmio_read_32(smmu_base + 0x24),
+ mmio_read_32(smmu_base + 0x28));
+
+ VERBOSE(" - idr3=0x%x idr4=0x%x idr5=0x%x\n",
+ mmio_read_32(smmu_base + 0x2c),
+ mmio_read_32(smmu_base + 0x30),
+ mmio_read_32(smmu_base + 0x34));
+
+ VERBOSE(" - idr6=0x%x idr7=0x%x\n",
+ mmio_read_32(smmu_base + 0x38),
+ mmio_read_32(smmu_base + 0x3c));
+
+ INFO("smmu init done\n");
+}
+
+static void brcm_stingray_dma_pl330_meminit(void)
+{
+ uintptr_t icfg_mem_ctrl = ICFG_DMAC_MEM_PWR_CTRL;
+
+ VERBOSE("dmac meminit start\n");
+
+ VERBOSE(" - arrpoweron\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONOUT))
+ ;
+
+ VERBOSE(" - arrpowerok\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKOUT))
+ ;
+
+ VERBOSE(" - poweron\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_DMAC_MEM_PWR_CTRL__POWERONIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_DMAC_MEM_PWR_CTRL__POWERONOUT))
+ ;
+
+ VERBOSE(" - powerok\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_DMAC_MEM_PWR_CTRL__POWEROKIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_DMAC_MEM_PWR_CTRL__POWEROKOUT))
+ ;
+
+ /* Wait sometime */
+ mdelay(1);
+
+ VERBOSE(" - remove isolation\n");
+ mmio_clrbits_32(icfg_mem_ctrl, ICFG_DMAC_MEM_PWR_CTRL__ISO);
+
+ INFO("dmac meminit done\n");
+}
+
+/* program the crmu access ranges for allowing non sec access*/
+static void brcm_stingray_crmu_access_init(void)
+{
+ /* Enable 0x6641c001 - 0x6641c701 for non secure access */
+ mmio_write_32(CRMU_CORE_ADDR_RANGE0_LOW, 0x6641c001);
+ mmio_write_32(CRMU_CORE_ADDR_RANGE0_LOW + 0x4, 0x6641c701);
+
+ /* Enable 0x6641d001 - 0x66424b01 for non secure access */
+ mmio_write_32(CRMU_CORE_ADDR_RANGE1_LOW, 0x6641d001);
+ mmio_write_32(CRMU_CORE_ADDR_RANGE1_LOW + 0x4, 0x66424b01);
+
+ /* Enable 0x66425001 - 0x66425f01 for non secure access */
+ mmio_write_32(CRMU_CORE_ADDR_RANGE2_LOW, 0x66425001);
+ mmio_write_32(CRMU_CORE_ADDR_RANGE2_LOW + 0x4, 0x66425f01);
+
+ INFO("crmu access init done\n");
+}
+
+static void brcm_stingray_scr_init(void)
+{
+ unsigned int val;
+ uintptr_t scr_base = SCR_BASE;
+ unsigned int clr_mask = SCR_AXCACHE_CONFIG_MASK;
+ unsigned int set_mask = SCR_TBUX_AXCACHE_CONFIG;
+
+ VERBOSE("scr init start\n");
+
+ /* awdomain=0x1 and ardomain=0x1 */
+ mmio_clrsetbits_32(scr_base + 0x0, clr_mask, set_mask);
+ val = mmio_read_32(scr_base + 0x0);
+ VERBOSE(" - set tbu0_config=0x%x\n", val);
+
+ /* awdomain=0x1 and ardomain=0x1 */
+ mmio_clrsetbits_32(scr_base + 0x4, clr_mask, set_mask);
+ val = mmio_read_32(scr_base + 0x4);
+ VERBOSE(" - set tbu1_config=0x%x\n", val);
+
+ /* awdomain=0x1 and ardomain=0x1 */
+ mmio_clrsetbits_32(scr_base + 0x8, clr_mask, set_mask);
+ val = mmio_read_32(scr_base + 0x8);
+ VERBOSE(" - set tbu2_config=0x%x\n", val);
+
+ /* awdomain=0x1 and ardomain=0x1 */
+ mmio_clrsetbits_32(scr_base + 0xc, clr_mask, set_mask);
+ val = mmio_read_32(scr_base + 0xc);
+ VERBOSE(" - set tbu3_config=0x%x\n", val);
+
+ /* awdomain=0x1 and ardomain=0x1 */
+ mmio_clrsetbits_32(scr_base + 0x10, clr_mask, set_mask);
+ val = mmio_read_32(scr_base + 0x10);
+ VERBOSE(" - set tbu4_config=0x%x\n", val);
+
+ /* awdomain=0x0 and ardomain=0x0 */
+ mmio_clrbits_32(scr_base + 0x14, clr_mask);
+ val = mmio_read_32(scr_base + 0x14);
+ VERBOSE(" - set gic_config=0x%x\n", val);
+
+ INFO("scr init done\n");
+}
+
+static void brcm_stingray_hsls_tzpcprot_init(void)
+{
+ unsigned int val;
+ uintptr_t tzpcdecprot_base = HSLS_TZPC_BASE;
+
+ VERBOSE("hsls tzpcprot init start\n");
+
+ /* Treat third-party masters as non-secured */
+ val = 0;
+ val |= BIT(6); /* SDIO1 */
+ val |= BIT(5); /* SDIO0 */
+ val |= BIT(0); /* AMAC */
+ mmio_write_32(tzpcdecprot_base + 0x810, val);
+
+ /* Print TZPC decode status registers */
+ VERBOSE(" - tzpcdecprot0=0x%x\n",
+ mmio_read_32(tzpcdecprot_base + 0x800));
+
+ VERBOSE(" - tzpcdecprot1=0x%x\n",
+ mmio_read_32(tzpcdecprot_base + 0x80c));
+
+ INFO("hsls tzpcprot init done\n");
+}
+
+#ifdef USE_I2S
+#define ICFG_AUDIO_POWER_CTRL (HSLS_ICFG_REGS_BASE + 0xaa8)
+#define ICFG_AUDIO_POWER_CTRL__POWERONIN BIT(0)
+#define ICFG_AUDIO_POWER_CTRL__POWEROKIN BIT(1)
+#define ICFG_AUDIO_POWER_CTRL__ARRPOWERONIN BIT(2)
+#define ICFG_AUDIO_POWER_CTRL__ARRPOWEROKIN BIT(3)
+#define ICFG_AUDIO_POWER_CTRL__POWERONOUT BIT(4)
+#define ICFG_AUDIO_POWER_CTRL__POWEROKOUT BIT(5)
+#define ICFG_AUDIO_POWER_CTRL__ARRPOWERONOUT BIT(6)
+#define ICFG_AUDIO_POWER_CTRL__ARRPOWEROKOUT BIT(7)
+#define ICFG_AUDIO_POWER_CTRL__ISO BIT(8)
+#define ICFG_AUDIO_SID_CONTROL (HSLS_ICFG_REGS_BASE + 0xaf8)
+#define ICFG_AUDIO_SID_SHIFT 5
+#define ICFG_AUDIO_SID_AWADDR_OFFSET 0x0
+#define ICFG_AUDIO_SID_ARADDR_OFFSET 0x4
+
+#define I2S_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0x1800)
+#define I2S_IDM_IO_CONTROL (HSLS_IDM_REGS_BASE + 0x1408)
+#define IO_CONTROL_CLK_ENABLE BIT(0)
+#define I2S_IDM0_ARCACHE_OFFSET 16
+#define I2S_IDM0_AWCACHE_OFFSET 20
+#define I2S_IDM0_ARCACHE_MASK (0xF << I2S_IDM0_ARCACHE_OFFSET)
+#define I2S_IDM0_AWCACHE_MASK (0xF << I2S_IDM0_AWCACHE_OFFSET)
+/* ARCACHE - AWCACHE is 0x22 Normal Non-cacheable Non-bufferable. */
+#define I2S_IDM0_ARCACHE_VAL (0x2 << I2S_IDM0_ARCACHE_OFFSET)
+#define I2S_IDM0_AWCACHE_VAL (0x2 << I2S_IDM0_AWCACHE_OFFSET)
+
+static void brcm_stingray_audio_init(void)
+{
+ unsigned int val;
+ uintptr_t icfg_mem_ctrl = ICFG_AUDIO_POWER_CTRL;
+ uintptr_t icfg_audio_sid = ICFG_AUDIO_SID_CONTROL;
+
+ mmio_write_32(I2S_RESET_CONTROL, 0x0);
+
+ mmio_clrsetbits_32(I2S_IDM_IO_CONTROL, I2S_IDM0_ARCACHE_MASK,
+ I2S_IDM0_ARCACHE_VAL);
+
+ mmio_clrsetbits_32(I2S_IDM_IO_CONTROL, I2S_IDM0_AWCACHE_MASK,
+ I2S_IDM0_AWCACHE_VAL);
+
+ mmio_setbits_32(I2S_IDM_IO_CONTROL, IO_CONTROL_CLK_ENABLE);
+
+ VERBOSE("audio meminit start\n");
+
+ VERBOSE(" - configure stream_id = 0x6001\n");
+ val = SR_SID_VAL(0x3, 0x0, 0x1) << ICFG_AUDIO_SID_SHIFT;
+ mmio_write_32(icfg_audio_sid + ICFG_AUDIO_SID_AWADDR_OFFSET, val);
+ mmio_write_32(icfg_audio_sid + ICFG_AUDIO_SID_ARADDR_OFFSET, val);
+
+ VERBOSE(" - arrpoweron\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_AUDIO_POWER_CTRL__ARRPOWERONIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_AUDIO_POWER_CTRL__ARRPOWERONOUT))
+ ;
+
+ VERBOSE(" - arrpowerok\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_AUDIO_POWER_CTRL__ARRPOWEROKIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_AUDIO_POWER_CTRL__ARRPOWEROKOUT))
+ ;
+
+ VERBOSE(" - poweron\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_AUDIO_POWER_CTRL__POWERONIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_AUDIO_POWER_CTRL__POWERONOUT))
+ ;
+
+ VERBOSE(" - powerok\n");
+ mmio_setbits_32(icfg_mem_ctrl,
+ ICFG_AUDIO_POWER_CTRL__POWEROKIN);
+ while (!(mmio_read_32(icfg_mem_ctrl) &
+ ICFG_AUDIO_POWER_CTRL__POWEROKOUT))
+ ;
+
+ /* Wait sometime */
+ mdelay(1);
+
+ VERBOSE(" - remove isolation\n");
+ mmio_clrbits_32(icfg_mem_ctrl, ICFG_AUDIO_POWER_CTRL__ISO);
+
+ INFO("audio meminit done\n");
+}
+#endif /* USE_I2S */
+
+/*
+ * These defines do not match the regfile but they are renamed in a way such
+ * that they are much more readible
+ */
+
+#define SCR_GPV_SMMU_NS (SCR_GPV_BASE + 0x28)
+#define SCR_GPV_GIC500_NS (SCR_GPV_BASE + 0x34)
+#define HSLS_GPV_NOR_S0_NS (HSLS_GPV_BASE + 0x14)
+#define HSLS_GPV_IDM1_NS (HSLS_GPV_BASE + 0x18)
+#define HSLS_GPV_IDM2_NS (HSLS_GPV_BASE + 0x1c)
+#define HSLS_SDIO0_SLAVE_NS (HSLS_GPV_BASE + 0x20)
+#define HSLS_SDIO1_SLAVE_NS (HSLS_GPV_BASE + 0x24)
+#define HSLS_GPV_APBY_NS (HSLS_GPV_BASE + 0x2c)
+#define HSLS_GPV_APBZ_NS (HSLS_GPV_BASE + 0x30)
+#define HSLS_GPV_APBX_NS (HSLS_GPV_BASE + 0x34)
+#define HSLS_GPV_APBS_NS (HSLS_GPV_BASE + 0x38)
+#define HSLS_GPV_QSPI_S0_NS (HSLS_GPV_BASE + 0x68)
+#define HSLS_GPV_APBR_NS (HSLS_GPV_BASE + 0x6c)
+#define FS4_CRYPTO_GPV_RM_SLAVE_NS (FS4_CRYPTO_GPV_BASE + 0x8)
+#define FS4_CRYPTO_GPV_APB_SWITCH_NS (FS4_CRYPTO_GPV_BASE + 0xc)
+#define FS4_RAID_GPV_RM_SLAVE_NS (FS4_RAID_GPV_BASE + 0x8)
+#define FS4_RAID_GPV_APB_SWITCH_NS (FS4_RAID_GPV_BASE + 0xc)
+#define FS4_CRYPTO_IDM_NS (NIC400_FS_NOC_ROOT + 0x1c)
+#define FS4_RAID_IDM_NS (NIC400_FS_NOC_ROOT + 0x28)
+
+#define FS4_CRYPTO_RING_COUNT 32
+#define FS4_CRYPTO_DME_COUNT 10
+#define FS4_CRYPTO_AE_COUNT 10
+#define FS4_CRYPTO_START_STREAM_ID 0x4000
+#define FS4_CRYPTO_MSI_DEVICE_ID 0x4100
+
+#define FS4_RAID_RING_COUNT 32
+#define FS4_RAID_DME_COUNT 8
+#define FS4_RAID_AE_COUNT 8
+#define FS4_RAID_START_STREAM_ID 0x4200
+#define FS4_RAID_MSI_DEVICE_ID 0x4300
+
+#define FS6_PKI_AXI_SLAVE_NS \
+ (NIC400_FS_NOC_ROOT + NIC400_FS_NOC_SECURITY2_OFFSET)
+
+#define FS6_PKI_AE_DME_APB_NS \
+ (NIC400_FS_NOC_ROOT + NIC400_FS_NOC_SECURITY7_OFFSET)
+#define FS6_PKI_IDM_IO_CONTROL_DIRECT 0x0
+#define FS6_PKI_IDM_RESET_CONTROL 0x0
+#define FS6_PKI_RING_COUNT 32
+#define FS6_PKI_DME_COUNT 1
+#define FS6_PKI_AE_COUNT 4
+#define FS6_PKI_START_STREAM_ID 0x4000
+#define FS6_PKI_MSI_DEVICE_ID 0x4100
+
+static void brcm_stingray_security_init(void)
+{
+ unsigned int val;
+
+ val = mmio_read_32(SCR_GPV_SMMU_NS);
+ val |= BIT(0); /* SMMU NS = 1 */
+ mmio_write_32(SCR_GPV_SMMU_NS, val);
+
+ val = mmio_read_32(SCR_GPV_GIC500_NS);
+ val |= BIT(0); /* GIC-500 NS = 1 */
+ mmio_write_32(SCR_GPV_GIC500_NS, val);
+
+ val = mmio_read_32(HSLS_GPV_NOR_S0_NS);
+ val |= BIT(0); /* NOR SLAVE NS = 1 */
+ mmio_write_32(HSLS_GPV_NOR_S0_NS, val);
+
+ val = mmio_read_32(HSLS_GPV_IDM1_NS);
+ val |= BIT(0); /* DMA IDM NS = 1 */
+ val |= BIT(1); /* I2S IDM NS = 1 */
+ val |= BIT(2); /* AMAC IDM NS = 1 */
+ val |= BIT(3); /* SDIO0 IDM NS = 1 */
+ val |= BIT(4); /* SDIO1 IDM NS = 1 */
+ val |= BIT(5); /* DS_3 IDM NS = 1 */
+ mmio_write_32(HSLS_GPV_IDM1_NS, val);
+
+ val = mmio_read_32(HSLS_GPV_IDM2_NS);
+ val |= BIT(2); /* QSPI IDM NS = 1 */
+ val |= BIT(1); /* NOR IDM NS = 1 */
+ val |= BIT(0); /* NAND IDM NS = 1 */
+ mmio_write_32(HSLS_GPV_IDM2_NS, val);
+
+ val = mmio_read_32(HSLS_GPV_APBY_NS);
+ val |= BIT(10); /* I2S NS = 1 */
+ val |= BIT(4); /* IOPAD NS = 1 */
+ val |= 0xf; /* UARTx NS = 1 */
+ mmio_write_32(HSLS_GPV_APBY_NS, val);
+
+ val = mmio_read_32(HSLS_GPV_APBZ_NS);
+ val |= BIT(2); /* RNG NS = 1 */
+ mmio_write_32(HSLS_GPV_APBZ_NS, val);
+
+ val = mmio_read_32(HSLS_GPV_APBS_NS);
+ val |= 0x3; /* SPIx NS = 1 */
+ mmio_write_32(HSLS_GPV_APBS_NS, val);
+
+ val = mmio_read_32(HSLS_GPV_APBR_NS);
+ val |= BIT(7); /* QSPI APB NS = 1 */
+ val |= BIT(6); /* NAND APB NS = 1 */
+ val |= BIT(5); /* NOR APB NS = 1 */
+ val |= BIT(4); /* AMAC APB NS = 1 */
+ val |= BIT(1); /* DMA S1 APB NS = 1 */
+ mmio_write_32(HSLS_GPV_APBR_NS, val);
+
+ val = mmio_read_32(HSLS_SDIO0_SLAVE_NS);
+ val |= BIT(0); /* SDIO0 NS = 1 */
+ mmio_write_32(HSLS_SDIO0_SLAVE_NS, val);
+
+ val = mmio_read_32(HSLS_SDIO1_SLAVE_NS);
+ val |= BIT(0); /* SDIO1 NS = 1 */
+ mmio_write_32(HSLS_SDIO1_SLAVE_NS, val);
+
+ val = mmio_read_32(HSLS_GPV_APBX_NS);
+ val |= BIT(14); /* SMBUS1 NS = 1 */
+ val |= BIT(13); /* GPIO NS = 1 */
+ val |= BIT(12); /* WDT NS = 1 */
+ val |= BIT(11); /* SMBUS0 NS = 1 */
+ val |= BIT(10); /* Timer7 NS = 1 */
+ val |= BIT(9); /* Timer6 NS = 1 */
+ val |= BIT(8); /* Timer5 NS = 1 */
+ val |= BIT(7); /* Timer4 NS = 1 */
+ val |= BIT(6); /* Timer3 NS = 1 */
+ val |= BIT(5); /* Timer2 NS = 1 */
+ val |= BIT(4); /* Timer1 NS = 1 */
+ val |= BIT(3); /* Timer0 NS = 1 */
+ val |= BIT(2); /* MDIO NS = 1 */
+ val |= BIT(1); /* PWM NS = 1 */
+ mmio_write_32(HSLS_GPV_APBX_NS, val);
+
+ val = mmio_read_32(HSLS_GPV_QSPI_S0_NS);
+ val |= BIT(0); /* QSPI NS = 1 */
+ mmio_write_32(HSLS_GPV_QSPI_S0_NS, val);
+
+#ifdef USE_FS4
+ val = 0x1; /* FS4 Crypto rm_slave */
+ mmio_write_32(FS4_CRYPTO_GPV_RM_SLAVE_NS, val);
+ val = 0x1; /* FS4 Crypto apb_switch */
+ mmio_write_32(FS4_CRYPTO_GPV_APB_SWITCH_NS, val);
+
+ val = 0x1; /* FS4 Raid rm_slave */
+ mmio_write_32(FS4_RAID_GPV_RM_SLAVE_NS, val);
+ val = 0x1; /* FS4 Raid apb_switch */
+ mmio_write_32(FS4_RAID_GPV_APB_SWITCH_NS, val);
+
+ val = 0x1; /* FS4 Crypto IDM */
+ mmio_write_32(FS4_CRYPTO_IDM_NS, val);
+ val = 0x1; /* FS4 RAID IDM */
+ mmio_write_32(FS4_RAID_IDM_NS, val);
+#endif
+
+#ifdef BL31_CCN_NONSECURE
+ /* Enable non-secure access to CCN registers */
+ mmio_write_32(OLY_MN_REGISTERS_NODE0_SECURE_ACCESS, 0x1);
+#endif
+
+#ifdef DDR_CTRL_PHY_NONSECURE
+ mmio_write_32(SCR_NOC_DDR_REGISTER_ACCESS, 0x1);
+#endif
+
+ paxc_mhb_ns_init();
+
+ /* unlock scr idm for non secure access */
+ mmio_write_32(SCR_NOC_SECURITY0, 0xffffffff);
+
+ INFO("security init done\r\n");
+}
+
+void brcm_gpio_pad_ns_init(void)
+{
+ /* configure all GPIO pads for non secure world access*/
+ mmio_write_32(GPIO_S_CNTRL_REG, 0xffffffff); /* 128-140 gpio pads */
+ mmio_write_32(GPIO_S_CNTRL_REG + 0x4, 0xffffffff); /* 96-127 gpio pad */
+ mmio_write_32(GPIO_S_CNTRL_REG + 0x8, 0xffffffff); /* 64-95 gpio pad */
+ mmio_write_32(GPIO_S_CNTRL_REG + 0xc, 0xffffffff); /* 32-63 gpio pad */
+ mmio_write_32(GPIO_S_CNTRL_REG + 0x10, 0xffffffff); /* 0-31 gpio pad */
+}
+
+#ifndef USE_DDR
+static void brcm_stingray_sram_ns_init(void)
+{
+ uintptr_t sram_root = TZC400_FS_SRAM_ROOT;
+ uintptr_t noc_root = NIC400_FS_NOC_ROOT;
+
+ mmio_write_32(sram_root + GATE_KEEPER_OFFSET, 1);
+ mmio_write_32(sram_root + REGION_ATTRIBUTES_0_OFFSET, 0xc0000000);
+ mmio_write_32(sram_root + REGION_ID_ACCESS_0_OFFSET, 0x00010001);
+ mmio_write_32(noc_root + NIC400_FS_NOC_SECURITY4_OFFSET, 0x1);
+ INFO(" stingray sram ns init done.\n");
+}
+#endif
+
+static void ccn_pre_init(void)
+{
+ /*
+ * Set WFC bit of RN-I nodes where FS4 is connected.
+ * This is required inorder to wait for read/write requests
+ * completion acknowledgment. Otherwise FS4 Ring Manager is
+ * getting stale data because of re-ordering of read/write
+ * requests at CCN level
+ */
+ mmio_setbits_32(OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL,
+ OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WFC);
+}
+
+static void ccn_post_init(void)
+{
+ mmio_setbits_32(OLY_HNI_REGISTERS_NODE0_PCIERC_RNI_NODEID_LIST,
+ SRP_RNI_PCIE_CONNECTED);
+ mmio_setbits_32(OLY_HNI_REGISTERS_NODE0_SA_AUX_CTL,
+ SA_AUX_CTL_SER_DEVNE_WR);
+
+ mmio_clrbits_32(OLY_HNI_REGISTERS_NODE0_POS_CONTROL,
+ POS_CONTROL_HNI_POS_EN);
+ mmio_clrbits_32(OLY_HNI_REGISTERS_NODE0_SA_AUX_CTL,
+ SA_AUX_CTL_POS_EARLY_WR_COMP_EN);
+}
+
+#ifndef BL31_BOOT_PRELOADED_SCP
+static void crmu_init(void)
+{
+ /*
+ * Configure CRMU for using SMMU
+ */
+
+ /*Program CRMU Stream ID */
+ mmio_write_32(CRMU_MASTER_AXI_ARUSER_CONFIG,
+ (CRMU_STREAM_ID << CRMU_SID_SHIFT));
+ mmio_write_32(CRMU_MASTER_AXI_AWUSER_CONFIG,
+ (CRMU_STREAM_ID << CRMU_SID_SHIFT));
+
+ /* Create Identity mapping */
+ arm_smmu_create_identity_map(DOMAIN_CRMU);
+
+ /* Enable Client Port for Secure Masters*/
+ arm_smmu_enable_secure_client_port();
+}
+#endif
+
+static void brcm_fsx_init(void)
+{
+#if defined(USE_FS4) && defined(USE_FS6)
+ #error "USE_FS4 and USE_FS6 should not be used together"
+#endif
+
+#ifdef USE_FS4
+ fsx_init(eFS4_CRYPTO, FS4_CRYPTO_RING_COUNT, FS4_CRYPTO_DME_COUNT,
+ FS4_CRYPTO_AE_COUNT, FS4_CRYPTO_START_STREAM_ID,
+ FS4_CRYPTO_MSI_DEVICE_ID, FS4_CRYPTO_IDM_IO_CONTROL_DIRECT,
+ FS4_CRYPTO_IDM_RESET_CONTROL, FS4_CRYPTO_BASE,
+ FS4_CRYPTO_DME_BASE);
+
+ fsx_init(eFS4_RAID, FS4_RAID_RING_COUNT, FS4_RAID_DME_COUNT,
+ FS4_RAID_AE_COUNT, FS4_RAID_START_STREAM_ID,
+ FS4_RAID_MSI_DEVICE_ID, FS4_RAID_IDM_IO_CONTROL_DIRECT,
+ FS4_RAID_IDM_RESET_CONTROL, FS4_RAID_BASE,
+ FS4_RAID_DME_BASE);
+
+ fsx_meminit("raid",
+ FS4_RAID_IDM_IO_CONTROL_DIRECT,
+ FS4_RAID_IDM_IO_STATUS);
+#endif
+}
+
+static void bcm_bl33_pass_info(void)
+{
+ struct bl33_info *info = (struct bl33_info *)BL33_SHARED_DDR_BASE;
+
+ if (sizeof(*info) > BL33_SHARED_DDR_SIZE)
+ WARN("bl33 shared area not reserved\n");
+
+ info->version = BL33_INFO_VERSION;
+ info->chip.chip_id = PLAT_CHIP_ID_GET;
+ info->chip.rev_id = PLAT_CHIP_REV_GET;
+}
+
+DEFINE_RENAME_SYSREG_RW_FUNCS(l2ctlr_el1, CORTEX_A72_L2CTLR_EL1)
+
+void plat_bcm_bl31_early_platform_setup(void *from_bl2,
+ bl_params_t *plat_params_from_bl2)
+{
+#ifdef BL31_BOOT_PRELOADED_SCP
+ image_info_t scp_image_info;
+
+ scp_image_info.image_base = PRELOADED_SCP_BASE;
+ scp_image_info.image_size = PRELOADED_SCP_SIZE;
+ plat_bcm_bl2_plat_handle_scp_bl2(&scp_image_info);
+#endif
+ /*
+ * In BL31, logs are saved to DDR and we have much larger space to
+ * store logs. We can now afford to save all logs >= the 'INFO' level
+ */
+ bcm_elog_init((void *)BCM_ELOG_BL31_BASE, BCM_ELOG_BL31_SIZE,
+ LOG_LEVEL_INFO);
+
+ INFO("L2CTLR = 0x%lx\n", read_l2ctlr_el1());
+
+ brcm_timer_sync_init();
+
+ brcm_stingray_dma_pl330_init();
+
+ brcm_stingray_dma_pl330_meminit();
+
+ brcm_stingray_spi_pl022_init(APBS_IDM_IDM_RESET_CONTROL);
+
+#ifdef USE_AMAC
+ brcm_stingray_amac_init();
+#endif
+
+ brcm_stingray_sdio_init();
+
+#ifdef NCSI_IO_DRIVE_STRENGTH_MA
+ brcm_stingray_ncsi_init();
+#endif
+
+#ifdef USE_USB
+ xhci_phy_init();
+#endif
+
+#ifdef USE_SATA
+ brcm_stingray_sata_init();
+#else
+ poweroff_sata_pll();
+#endif
+
+ ccn_pre_init();
+
+ brcm_fsx_init();
+
+ brcm_stingray_smmu_init();
+
+ brcm_stingray_pka_meminit();
+
+ brcm_stingray_crmu_access_init();
+
+ brcm_stingray_scr_init();
+
+ brcm_stingray_hsls_tzpcprot_init();
+
+#ifdef USE_I2S
+ brcm_stingray_audio_init();
+#endif
+
+ ccn_post_init();
+
+ paxb_init();
+
+ paxc_init();
+
+#ifndef BL31_BOOT_PRELOADED_SCP
+ crmu_init();
+#endif
+
+ /* Note: this should be last thing because
+ * FS4 GPV registers only work after FS4 block
+ * (i.e. crypto,raid,cop) is out of reset.
+ */
+ brcm_stingray_security_init();
+
+ brcm_gpio_pad_ns_init();
+
+#ifndef USE_DDR
+ brcm_stingray_sram_ns_init();
+#endif
+
+#ifdef BL31_FORCE_CPU_FULL_FREQ
+ bcm_set_ihost_pll_freq(0x0, PLL_FREQ_FULL);
+#endif
+
+ brcm_stingray_gain_qspi_control();
+
+#ifdef USE_PAXC
+ /*
+ * Check that the handshake has occurred and report ChiMP status.
+ * This is required. Otherwise (especially on Palladium)
+ * Linux might have booted to the pcie stage whereas
+ * ChiMP has not yet booted. Note that nic_mode case has already
+ * been considered above.
+ */
+ if ((boot_source_get() != BOOT_SOURCE_QSPI) &&
+ (!bcm_chimp_is_nic_mode()) &&
+ (!bcm_chimp_wait_handshake())
+ ) {
+ /* Does ChiMP report an error ? */
+ uint32_t err;
+
+ err = bcm_chimp_read_ctrl(CHIMP_REG_CTRL_BPE_STAT_REG);
+ if ((err & CHIMP_ERROR_MASK) == 0)
+ /* ChiMP has not booted yet, but no error reported */
+ WARN("ChiMP not booted yet, but no error reported.\n");
+ }
+
+#if DEBUG
+ if (boot_source_get() != BOOT_SOURCE_QSPI)
+ INFO("Current ChiMP Status: 0x%x; bpe_mod reg: 0x%x\n"
+ "fastboot register: 0x%x; handshake register 0x%x\n",
+ bcm_chimp_read_ctrl(CHIMP_REG_CTRL_BPE_STAT_REG),
+ bcm_chimp_read_ctrl(CHIMP_REG_CTRL_BPE_MODE_REG),
+ bcm_chimp_read_ctrl(CHIMP_REG_CTRL_FSTBOOT_PTR_REG),
+ bcm_chimp_read(CHIMP_REG_ECO_RESERVED));
+#endif /* DEBUG */
+#endif
+
+#ifdef FS4_DISABLE_CLOCK
+ flush_dcache_range(
+ PLAT_BRCM_TRUSTED_SRAM_BASE,
+ PLAT_BRCM_TRUSTED_SRAM_SIZE);
+ fs4_disable_clocks(true, true, true);
+#endif
+
+ /* pass information to BL33 through shared DDR region */
+ bcm_bl33_pass_info();
+
+ /*
+ * We are not yet at the end of BL31, but we can stop log here so we do
+ * not need to add 'bcm_elog_exit' to the standard BL31 code. The
+ * benefit of capturing BL31 logs after this is very minimal in a
+ * production system
+ */
+ bcm_elog_exit();
+
+#if !BRCM_DISABLE_TRUSTED_WDOG
+ /*
+ * Secure watchdog was started earlier in BL2, now it's time to stop
+ * it
+ */
+ sp805_stop(ARM_SP805_TWDG_BASE);
+#endif
+}
diff --git a/plat/brcm/board/stingray/src/brcm_pm_ops.c b/plat/brcm/board/stingray/src/brcm_pm_ops.c
new file mode 100644
index 0000000..5e07fac
--- /dev/null
+++ b/plat/brcm/board/stingray/src/brcm_pm_ops.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <inttypes.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/arm/ccn.h>
+#include <lib/bakery_lock.h>
+#include <lib/mmio.h>
+#include <lib/psci/psci.h>
+#include <lib/spinlock.h>
+
+#include <brcm_scpi.h>
+#include <chimp.h>
+#include <cmn_plat_util.h>
+#include <plat_brcm.h>
+#include <platform_def.h>
+#include <sr_utils.h>
+
+#include "m0_cfg.h"
+
+
+#define CORE_PWR_STATE(state) ((state)->pwr_domain_state[MPIDR_AFFLVL0])
+#define CLUSTER_PWR_STATE(state) \
+ ((state)->pwr_domain_state[MPIDR_AFFLVL1])
+#define SYSTEM_PWR_STATE(state) ((state)->pwr_domain_state[MPIDR_AFFLVL2])
+
+#define VENDOR_RST_TYPE_SHIFT 4
+
+#if HW_ASSISTED_COHERENCY
+/*
+ * On systems where participant CPUs are cache-coherent, we can use spinlocks
+ * instead of bakery locks.
+ */
+spinlock_t event_lock;
+#define event_lock_get(_lock) spin_lock(&_lock)
+#define event_lock_release(_lock) spin_unlock(&_lock)
+
+#else
+/*
+ * Use bakery locks for state coordination as not all participants are
+ * cache coherent now.
+ */
+DEFINE_BAKERY_LOCK(event_lock);
+#define event_lock_get(_lock) bakery_lock_get(&_lock)
+#define event_lock_release(_lock) bakery_lock_release(&_lock)
+#endif
+
+static int brcm_pwr_domain_on(u_register_t mpidr)
+{
+ /*
+ * SCP takes care of powering up parent power domains so we
+ * only need to care about level 0
+ */
+ scpi_set_brcm_power_state(mpidr, scpi_power_on, scpi_power_on,
+ scpi_power_on);
+
+ return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Handler called when a power level has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from. This handler would never be invoked with
+ * the system power domain uninitialized as either the primary would have taken
+ * care of it as part of cold boot or the first core awakened from system
+ * suspend would have already initialized it.
+ ******************************************************************************/
+static void brcm_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+ unsigned long cluster_id = MPIDR_AFFLVL1_VAL(read_mpidr());
+
+ /* Assert that the system power domain need not be initialized */
+ assert(SYSTEM_PWR_STATE(target_state) == PLAT_LOCAL_STATE_RUN);
+
+ assert(CORE_PWR_STATE(target_state) == PLAT_LOCAL_STATE_OFF);
+
+ /*
+ * Perform the common cluster specific operations i.e enable coherency
+ * if this cluster was off.
+ */
+ if (CLUSTER_PWR_STATE(target_state) == PLAT_LOCAL_STATE_OFF) {
+ INFO("Cluster #%lu entering to snoop/dvm domain\n", cluster_id);
+ ccn_enter_snoop_dvm_domain(1 << cluster_id);
+ }
+
+ /* Program the gic per-cpu distributor or re-distributor interface */
+ plat_brcm_gic_pcpu_init();
+
+ /* Enable the gic cpu interface */
+ plat_brcm_gic_cpuif_enable();
+}
+
+static void brcm_power_down_common(void)
+{
+ unsigned int standbywfil2, standbywfi;
+ uint64_t mpidr = read_mpidr_el1();
+
+ switch (MPIDR_AFFLVL1_VAL(mpidr)) {
+ case 0x0:
+ standbywfi = CDRU_PROC_EVENT_CLEAR__IH0_CDRU_STANDBYWFI;
+ standbywfil2 = CDRU_PROC_EVENT_CLEAR__IH0_CDRU_STANDBYWFIL2;
+ break;
+ case 0x1:
+ standbywfi = CDRU_PROC_EVENT_CLEAR__IH1_CDRU_STANDBYWFI;
+ standbywfil2 = CDRU_PROC_EVENT_CLEAR__IH1_CDRU_STANDBYWFIL2;
+ break;
+ case 0x2:
+ standbywfi = CDRU_PROC_EVENT_CLEAR__IH2_CDRU_STANDBYWFI;
+ standbywfil2 = CDRU_PROC_EVENT_CLEAR__IH2_CDRU_STANDBYWFIL2;
+ break;
+ case 0x3:
+ standbywfi = CDRU_PROC_EVENT_CLEAR__IH3_CDRU_STANDBYWFI;
+ standbywfil2 = CDRU_PROC_EVENT_CLEAR__IH3_CDRU_STANDBYWFIL2;
+ break;
+ default:
+ ERROR("Invalid cluster #%" PRIx64 "\n", MPIDR_AFFLVL1_VAL(mpidr));
+ return;
+ }
+ /* Clear the WFI status bit */
+ event_lock_get(event_lock);
+ mmio_setbits_32(CDRU_PROC_EVENT_CLEAR,
+ (1 << (standbywfi + MPIDR_AFFLVL0_VAL(mpidr))) |
+ (1 << standbywfil2));
+ event_lock_release(event_lock);
+}
+
+/*
+ * Helper function to inform power down state to SCP.
+ */
+static void brcm_scp_suspend(const psci_power_state_t *target_state)
+{
+ uint32_t cluster_state = scpi_power_on;
+ uint32_t system_state = scpi_power_on;
+
+ /* Check if power down at system power domain level is requested */
+ if (SYSTEM_PWR_STATE(target_state) == PLAT_LOCAL_STATE_OFF)
+ system_state = scpi_power_retention;
+
+ /* Check if Cluster is to be turned off */
+ if (CLUSTER_PWR_STATE(target_state) == PLAT_LOCAL_STATE_OFF)
+ cluster_state = scpi_power_off;
+
+ /*
+ * Ask the SCP to power down the appropriate components depending upon
+ * their state.
+ */
+ scpi_set_brcm_power_state(read_mpidr_el1(),
+ scpi_power_off,
+ cluster_state,
+ system_state);
+}
+
+/*
+ * Helper function to turn off a CPU power domain and its parent power domains
+ * if applicable. Since SCPI doesn't differentiate between OFF and suspend, we
+ * call the suspend helper here.
+ */
+static void brcm_scp_off(const psci_power_state_t *target_state)
+{
+ brcm_scp_suspend(target_state);
+}
+
+static void brcm_pwr_domain_off(const psci_power_state_t *target_state)
+{
+ unsigned long cluster_id = MPIDR_AFFLVL1_VAL(read_mpidr_el1());
+
+ assert(CORE_PWR_STATE(target_state) == PLAT_LOCAL_STATE_OFF);
+ /* Prevent interrupts from spuriously waking up this cpu */
+ plat_brcm_gic_cpuif_disable();
+
+ /* Turn redistributor off */
+ plat_brcm_gic_redistif_off();
+
+ /* If Cluster is to be turned off, disable coherency */
+ if (CLUSTER_PWR_STATE(target_state) == PLAT_LOCAL_STATE_OFF)
+ ccn_exit_snoop_dvm_domain(1 << cluster_id);
+
+ brcm_power_down_common();
+
+ brcm_scp_off(target_state);
+}
+
+/*******************************************************************************
+ * Handler called when the CPU power domain is about to enter standby.
+ ******************************************************************************/
+static void brcm_cpu_standby(plat_local_state_t cpu_state)
+{
+ unsigned int scr;
+
+ assert(cpu_state == PLAT_LOCAL_STATE_RET);
+
+ scr = read_scr_el3();
+ /*
+ * Enable the Non secure interrupt to wake the CPU.
+ * In GICv3 affinity routing mode, the non secure group1 interrupts use
+ * the PhysicalFIQ at EL3 whereas in GICv2, it uses the PhysicalIRQ.
+ * Enabling both the bits works for both GICv2 mode and GICv3 affinity
+ * routing mode.
+ */
+ write_scr_el3(scr | SCR_IRQ_BIT | SCR_FIQ_BIT);
+ isb();
+ dsb();
+ wfi();
+
+ /*
+ * Restore SCR to the original value, synchronisation of scr_el3 is
+ * done by eret while el3_exit to save some execution cycles.
+ */
+ write_scr_el3(scr);
+}
+
+/*
+ * Helper function to shutdown the system via SCPI.
+ */
+static void __dead2 brcm_scp_sys_shutdown(void)
+{
+ /*
+ * Disable GIC CPU interface to prevent pending interrupt
+ * from waking up the AP from WFI.
+ */
+ plat_brcm_gic_cpuif_disable();
+
+ /* Flush and invalidate data cache */
+ dcsw_op_all(DCCISW);
+
+ /* Bring Cluster out of coherency domain as its going to die */
+ plat_brcm_interconnect_exit_coherency();
+
+ brcm_power_down_common();
+
+ /* Send the power down request to the SCP */
+ scpi_sys_power_state(scpi_system_shutdown);
+
+ wfi();
+ ERROR("BRCM System Off: operation not handled.\n");
+ panic();
+}
+
+/*
+ * Helper function to reset the system
+ */
+static void __dead2 brcm_scp_sys_reset(unsigned int reset_type)
+{
+ /*
+ * Disable GIC CPU interface to prevent pending interrupt
+ * from waking up the AP from WFI.
+ */
+ plat_brcm_gic_cpuif_disable();
+
+ /* Flush and invalidate data cache */
+ dcsw_op_all(DCCISW);
+
+ /* Bring Cluster out of coherency domain as its going to die */
+ plat_brcm_interconnect_exit_coherency();
+
+ brcm_power_down_common();
+
+ /* Send the system reset request to the SCP
+ *
+ * As per PSCI spec system power state could be
+ * 0-> Shutdown
+ * 1-> Reboot- Board level Reset
+ * 2-> Reset - SoC level Reset
+ *
+ * Spec allocates 8 bits, 2 nibble, for this. One nibble is sufficient
+ * for sending the state hence We are utilizing 2nd nibble for vendor
+ * define reset type.
+ */
+ scpi_sys_power_state((reset_type << VENDOR_RST_TYPE_SHIFT) |
+ scpi_system_reboot);
+
+ wfi();
+ ERROR("BRCM System Reset: operation not handled.\n");
+ panic();
+}
+
+static void __dead2 brcm_system_reset(void)
+{
+ unsigned int reset_type;
+
+ if (bcm_chimp_is_nic_mode())
+ reset_type = SOFT_RESET_L3;
+ else
+ reset_type = SOFT_SYS_RESET_L1;
+
+ brcm_scp_sys_reset(reset_type);
+}
+
+static int brcm_system_reset2(int is_vendor, int reset_type,
+ u_register_t cookie)
+{
+ if (!is_vendor) {
+ /* Architectural warm boot: only warm reset is supported */
+ reset_type = SOFT_RESET_L3;
+ } else {
+ uint32_t boot_source = (uint32_t)cookie;
+
+ boot_source &= BOOT_SOURCE_MASK;
+ brcm_stingray_set_straps(boot_source);
+ }
+ brcm_scp_sys_reset(reset_type);
+
+ /*
+ * brcm_scp_sys_reset cannot return (it is a __dead function),
+ * but brcm_system_reset2 has to return some value, even in
+ * this case.
+ */
+ return 0;
+}
+
+static int brcm_validate_ns_entrypoint(uintptr_t entrypoint)
+{
+ /*
+ * Check if the non secure entrypoint lies within the non
+ * secure DRAM.
+ */
+ if ((entrypoint >= BRCM_NS_DRAM1_BASE) &&
+ (entrypoint < (BRCM_NS_DRAM1_BASE + BRCM_NS_DRAM1_SIZE)))
+ return PSCI_E_SUCCESS;
+#ifdef __aarch64__
+ if ((entrypoint >= BRCM_DRAM2_BASE) &&
+ (entrypoint < (BRCM_DRAM2_BASE + BRCM_DRAM2_SIZE)))
+ return PSCI_E_SUCCESS;
+
+ if ((entrypoint >= BRCM_DRAM3_BASE) &&
+ (entrypoint < (BRCM_DRAM3_BASE + BRCM_DRAM3_SIZE)))
+ return PSCI_E_SUCCESS;
+#endif
+
+ return PSCI_E_INVALID_ADDRESS;
+}
+
+/*******************************************************************************
+ * ARM standard platform handler called to check the validity of the power state
+ * parameter.
+ ******************************************************************************/
+static int brcm_validate_power_state(unsigned int power_state,
+ psci_power_state_t *req_state)
+{
+ int pstate = psci_get_pstate_type(power_state);
+ int pwr_lvl = psci_get_pstate_pwrlvl(power_state);
+ int i;
+
+ assert(req_state);
+
+ if (pwr_lvl > PLAT_MAX_PWR_LVL)
+ return PSCI_E_INVALID_PARAMS;
+
+ /* Sanity check the requested state */
+ if (pstate == PSTATE_TYPE_STANDBY) {
+ /*
+ * It's possible to enter standby only on power level 0
+ * Ignore any other power level.
+ */
+ if (pwr_lvl != MPIDR_AFFLVL0)
+ return PSCI_E_INVALID_PARAMS;
+
+ req_state->pwr_domain_state[MPIDR_AFFLVL0] =
+ PLAT_LOCAL_STATE_RET;
+ } else {
+ for (i = MPIDR_AFFLVL0; i <= pwr_lvl; i++)
+ req_state->pwr_domain_state[i] =
+ PLAT_LOCAL_STATE_OFF;
+ }
+
+ /*
+ * We expect the 'state id' to be zero.
+ */
+ if (psci_get_pstate_id(power_state))
+ return PSCI_E_INVALID_PARAMS;
+
+ return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Export the platform handlers via plat_brcm_psci_pm_ops. The ARM Standard
+ * platform will take care of registering the handlers with PSCI.
+ ******************************************************************************/
+plat_psci_ops_t plat_brcm_psci_pm_ops = {
+ .pwr_domain_on = brcm_pwr_domain_on,
+ .pwr_domain_on_finish = brcm_pwr_domain_on_finish,
+ .pwr_domain_off = brcm_pwr_domain_off,
+ .cpu_standby = brcm_cpu_standby,
+ .system_off = brcm_scp_sys_shutdown,
+ .system_reset = brcm_system_reset,
+ .system_reset2 = brcm_system_reset2,
+ .validate_ns_entrypoint = brcm_validate_ns_entrypoint,
+ .validate_power_state = brcm_validate_power_state,
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+ const struct plat_psci_ops **psci_ops)
+{
+ *psci_ops = &plat_brcm_psci_pm_ops;
+
+ /* Setup mailbox with entry point. */
+ mmio_write_64(CRMU_CFG_BASE + offsetof(M0CFG, core_cfg.rvbar),
+ sec_entrypoint);
+
+ return 0;
+}
diff --git a/plat/brcm/board/stingray/src/fsx.c b/plat/brcm/board/stingray/src/fsx.c
new file mode 100644
index 0000000..5725a2e
--- /dev/null
+++ b/plat/brcm/board/stingray/src/fsx.c
@@ -0,0 +1,477 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+#include <plat/common/common_def.h>
+
+#include <fsx.h>
+#include <platform_def.h>
+#include <sr_utils.h>
+
+#define FS4_IDM_IO_CONTROL_DIRECT__SRAM_CLK_EN 0
+
+#define FS4_IDM_IO_CONTROL_DIRECT__MEM_POWERON 11
+#define FS4_IDM_IO_CONTROL_DIRECT__MEM_POWEROK 12
+#define FS4_IDM_IO_CONTROL_DIRECT__MEM_ARRPOWERON 13
+#define FS4_IDM_IO_CONTROL_DIRECT__MEM_ARRPOWEROK 14
+#define FS4_IDM_IO_CONTROL_DIRECT__MEM_ISO 15
+#define FS4_IDM_IO_CONTROL_DIRECT__CLK_EN 31
+
+#define FS4_IDM_IO_STATUS__MEM_POWERON 0
+#define FS4_IDM_IO_STATUS__MEM_POWEROK 1
+#define FS4_IDM_IO_STATUS__MEM_ARRPOWERON 2
+#define FS4_IDM_IO_STATUS__MEM_ARRPOWEROK 3
+#define FS4_IDM_IO_STATUS__MEM_ALLOK 0xf
+
+#define FS4_IDM_RESET_CONTROL__RESET 0
+
+#define FSX_RINGx_BASE(__b, __i) \
+ ((__b) + (__i) * 0x10000)
+
+#define FSX_RINGx_VERSION_NUMBER(__b, __i) \
+ (FSX_RINGx_BASE(__b, __i) + 0x0)
+
+#define FSX_RINGx_MSI_DEV_ID(__b, __i) \
+ (FSX_RINGx_BASE(__b, __i) + 0x44)
+
+#define FSX_COMM_RINGx_BASE(__b, __i) \
+ ((__b) + 0x200000 + (__i) * 0x100)
+
+#define FSX_COMM_RINGx_CONTROL(__b, __i) \
+ (FSX_COMM_RINGx_BASE(__b, __i) + 0x0)
+#define FSX_COMM_RINGx_CONTROL__AXI_ID 8
+#define FSX_COMM_RINGx_CONTROL__AXI_ID_MASK 0x1f
+#define FSX_COMM_RINGx_CONTROL__PRIORITY 4
+#define FSX_COMM_RINGx_CONTROL__PRIORITY_MASK 0x7
+#define FSX_COMM_RINGx_CONTROL__AE_GROUP 0
+#define FSX_COMM_RINGx_CONTROL__AE_GROUP_MASK 0x7
+
+#define FSX_COMM_RINGx_MSI_DEV_ID(__b, __i) \
+ (FSX_COMM_RINGx_BASE(__b, __i) + 0x4)
+
+#define FSX_AEx_BASE(__b, __i) \
+ ((__b) + 0x202000 + (__i) * 0x100)
+
+#define FSX_AEx_CONTROL_REGISTER(__b, __i) \
+ (FSX_AEx_BASE(__b, __i) + 0x0)
+#define FSX_AEx_CONTROL_REGISTER__ACTIVE 4
+#define FSX_AEx_CONTROL_REGISTER__GROUP_ID 0
+#define FSX_AEx_CONTROL_REGISTER__GROUP_ID_MASK 0x7
+
+#define FSX_COMM_RM_RING_SECURITY_SETTING 0x0
+
+#define FSX_COMM_RM_SSID_CONTROL 0x4
+#define FSX_COMM_RM_SSID_CONTROL__RING_BITS 5
+#define FSX_COMM_RM_SSID_CONTROL__MASK 0x3ff
+
+#define FSX_COMM_RM_CONTROL_REGISTER 0x8
+#define FSX_COMM_RM_CONTROL_REGISTER__CONFIG_DONE 2
+#define FSX_COMM_RM_CONTROL_REGISTER__AE_TIMEOUT 5
+#define FSX_COMM_RM_CONTROL_REGISTER__AE_LOCKING 7
+
+#define FSX_COMM_RM_TIMER_CONTROL_0 0xc
+#define FSX_COMM_RM_TIMER_CONTROL_0__FAST 16
+#define FSX_COMM_RM_TIMER_CONTROL_0__MEDIUM 0
+
+#define FSX_COMM_RM_TIMER_CONTROL_1 0x10
+#define FSX_COMM_RM_TIMER_CONTROL_1__SLOW 16
+#define FSX_COMM_RM_TIMER_CONTROL_1__IDLE 0
+
+#define FSX_COMM_RM_BURST_BD_THRESHOLD 0x14
+#define FSX_COMM_RM_BURST_BD_THRESHOLD_LOW 0
+#define FSX_COMM_RM_BURST_BD_THRESHOLD_HIGH 16
+
+#define FSX_COMM_RM_BURST_LENGTH 0x18
+#define FSX_COMM_RM_BURST_LENGTH__FOR_DDR_ADDR_GEN 16
+#define FSX_COMM_RM_BURST_LENGTH__FOR_DDR_ADDR_GEN_MASK 0x1ff
+#define FSX_COMM_RM_BURST_LENGTH__FOR_TOGGLE 0
+#define FSX_COMM_RM_BURST_LENGTH__FOR_TOGGLE_MASK 0x1ff
+
+#define FSX_COMM_RM_FIFO_THRESHOLD 0x1c
+#define FSX_COMM_RM_FIFO_THRESHOLD__BD_FIFO_FULL 16
+#define FSX_COMM_RM_FIFO_THRESHOLD__BD_FIFO_FULL_MASK 0x1ff
+#define FSX_COMM_RM_FIFO_THRESHOLD__AE_FIFO_FULL 0
+#define FSX_COMM_RM_FIFO_THRESHOLD__AE_FIFO_FULL_MASK 0x1f
+
+#define FSX_COMM_RM_AE_TIMEOUT 0x24
+
+#define FSX_COMM_RM_RING_FLUSH_TIMEOUT 0x2c
+
+#define FSX_COMM_RM_MEMORY_CONFIGURATION 0x30
+#define FSX_COMM_RM_MEMORY_CONFIGURATION__ARRPOWERONIN 12
+#define FSX_COMM_RM_MEMORY_CONFIGURATION__ARRPOWEROKIN 13
+#define FSX_COMM_RM_MEMORY_CONFIGURATION__POWERONIN 14
+#define FSX_COMM_RM_MEMORY_CONFIGURATION__POWEROKIN 15
+
+#define FSX_COMM_RM_AXI_CONTROL 0x34
+#define FSX_COMM_RM_AXI_CONTROL__WRITE_CHANNEL_EN 28
+#define FSX_COMM_RM_AXI_CONTROL__READ_CHANNEL_EN 24
+#define FSX_COMM_RM_AXI_CONTROL__AWQOS 20
+#define FSX_COMM_RM_AXI_CONTROL__ARQOS 16
+#define FSX_COMM_RM_AXI_CONTROL__AWPROT 12
+#define FSX_COMM_RM_AXI_CONTROL__ARPROT 8
+#define FSX_COMM_RM_AXI_CONTROL__AWCACHE 4
+#define FSX_COMM_RM_AXI_CONTROL__ARCACHE 0
+
+#define FSX_COMM_RM_CONFIG_INTERRUPT_STATUS_CLEAR 0x48
+
+#define FSX_COMM_RM_GROUP_PKT_EXTENSION_SUPPORT 0xc0
+
+#define FSX_COMM_RM_AXI_READ_BURST_THRESHOLD 0xc8
+#define FSX_COMM_RM_AXI_READ_BURST_THRESHOLD__MASK 0x1ff
+#define FSX_COMM_RM_AXI_READ_BURST_THRESHOLD__MAX 16
+#define FSX_COMM_RM_AXI_READ_BURST_THRESHOLD__MIN 0
+
+#define FSX_COMM_RM_GROUP_RING_COUNT 0xcc
+
+#define FSX_COMM_RM_MAIN_HW_INIT_DONE 0x12c
+#define FSX_COMM_RM_MAIN_HW_INIT_DONE__MASK 0x1
+
+#define FSX_DMEx_BASE(__b, __i) \
+ ((__b) + (__i) * 0x1000)
+
+#define FSX_DMEx_AXI_CONTROL(__b, __i) \
+ (FSX_DMEx_BASE(__b, __i) + 0x4)
+#define FSX_DMEx_AXI_CONTROL__WRITE_CHANNEL_EN 28
+#define FSX_DMEx_AXI_CONTROL__READ_CHANNEL_EN 24
+#define FSX_DMEx_AXI_CONTROL__AWQOS 20
+#define FSX_DMEx_AXI_CONTROL__ARQOS 16
+#define FSX_DMEx_AXI_CONTROL__AWCACHE 4
+#define FSX_DMEx_AXI_CONTROL__ARCACHE 0
+
+#define FSX_DMEx_WR_FIFO_THRESHOLD(__b, __i) \
+ (FSX_DMEx_BASE(__b, __i) + 0xc)
+#define FSX_DMEx_WR_FIFO_THRESHOLD__MASK 0x3ff
+#define FSX_DMEx_WR_FIFO_THRESHOLD__MAX 10
+#define FSX_DMEx_WR_FIFO_THRESHOLD__MIN 0
+
+#define FSX_DMEx_RD_FIFO_THRESHOLD(__b, __i) \
+ (FSX_DMEx_BASE(__b, __i) + 0x14)
+#define FSX_DMEx_RD_FIFO_THRESHOLD__MASK 0x3ff
+#define FSX_DMEx_RD_FIFO_THRESHOLD__MAX 10
+#define FSX_DMEx_RD_FIFO_THRESHOLD__MIN 0
+
+#define FS6_SUB_TOP_BASE 0x66D8F800
+#define FS6_PKI_DME_RESET 0x4
+#define PKI_DME_RESET 1
+
+char *fsx_type_names[] = {
+ "fs4-raid",
+ "fs4-crypto",
+ "fs6-pki",
+};
+
+void fsx_init(eFSX_TYPE fsx_type,
+ unsigned int ring_count,
+ unsigned int dme_count,
+ unsigned int ae_count,
+ unsigned int start_stream_id,
+ unsigned int msi_dev_id,
+ uintptr_t idm_io_control_direct,
+ uintptr_t idm_reset_control,
+ uintptr_t base,
+ uintptr_t dme_base)
+{
+ int try;
+ unsigned int i, v, data;
+ uintptr_t fs4_idm_io_control_direct = idm_io_control_direct;
+ uintptr_t fs4_idm_reset_control = idm_reset_control;
+ uintptr_t fsx_comm_rm = (base + 0x203000);
+
+ VERBOSE("fsx %s init start\n", fsx_type_names[fsx_type]);
+
+ if (fsx_type == eFS4_RAID || fsx_type == eFS4_CRYPTO) {
+ /* Enable FSx engine clock */
+ VERBOSE(" - enable fsx clock\n");
+ mmio_write_32(fs4_idm_io_control_direct,
+ (1U << FS4_IDM_IO_CONTROL_DIRECT__CLK_EN));
+ udelay(500);
+
+ /* Reset FSx engine */
+ VERBOSE(" - reset fsx\n");
+ v = mmio_read_32(fs4_idm_reset_control);
+ v |= (1 << FS4_IDM_RESET_CONTROL__RESET);
+ mmio_write_32(fs4_idm_reset_control, v);
+ udelay(500);
+ v = mmio_read_32(fs4_idm_reset_control);
+ v &= ~(1 << FS4_IDM_RESET_CONTROL__RESET);
+ mmio_write_32(fs4_idm_reset_control, v);
+ } else {
+ /*
+ * Default RM and AE are out of reset,
+ * So only DME Reset added here
+ */
+ v = mmio_read_32(FS6_SUB_TOP_BASE + FS6_PKI_DME_RESET);
+ v &= ~(PKI_DME_RESET);
+ mmio_write_32(FS6_SUB_TOP_BASE + FS6_PKI_DME_RESET, v);
+ }
+
+ /* Wait for HW-init done */
+ VERBOSE(" - wait for HW-init done\n");
+ try = 10000;
+ do {
+ udelay(1);
+ data = mmio_read_32(fsx_comm_rm +
+ FSX_COMM_RM_MAIN_HW_INIT_DONE);
+ try--;
+ } while (!(data & FSX_COMM_RM_MAIN_HW_INIT_DONE__MASK) && (try > 0));
+
+ if (try <= 0)
+ ERROR("fsx_comm_rm + 0x%x: 0x%x\n",
+ data, FSX_COMM_RM_MAIN_HW_INIT_DONE);
+
+ /* Make all rings non-secured */
+ VERBOSE(" - make all rings non-secured\n");
+ v = 0xffffffff;
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_RING_SECURITY_SETTING, v);
+
+ /* Set start stream-id for rings to */
+ VERBOSE(" - set start stream-id for rings to 0x%x\n",
+ start_stream_id);
+ v = start_stream_id >> FSX_COMM_RM_SSID_CONTROL__RING_BITS;
+ v &= FSX_COMM_RM_SSID_CONTROL__MASK;
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_SSID_CONTROL, v);
+
+ /* Set timer configuration */
+ VERBOSE(" - set timer configuration\n");
+ v = 0x0271 << FSX_COMM_RM_TIMER_CONTROL_0__MEDIUM;
+ v |= (0x0138 << FSX_COMM_RM_TIMER_CONTROL_0__FAST);
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_TIMER_CONTROL_0, v);
+ v = 0x09c4 << FSX_COMM_RM_TIMER_CONTROL_1__IDLE;
+ v |= (0x04e2 << FSX_COMM_RM_TIMER_CONTROL_1__SLOW);
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_TIMER_CONTROL_1, v);
+ v = 0x0000f424;
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_RING_FLUSH_TIMEOUT, v);
+
+ /* Set burst length and fifo threshold */
+ VERBOSE(" - set burst length, fifo and bd threshold\n");
+ v = 0x0;
+ v |= (0x8 << FSX_COMM_RM_BURST_LENGTH__FOR_DDR_ADDR_GEN);
+ v |= (0x8 << FSX_COMM_RM_BURST_LENGTH__FOR_TOGGLE);
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_BURST_LENGTH, v);
+ v = 0x0;
+ v |= (0x67 << FSX_COMM_RM_FIFO_THRESHOLD__BD_FIFO_FULL);
+ v |= (0x18 << FSX_COMM_RM_FIFO_THRESHOLD__AE_FIFO_FULL);
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_FIFO_THRESHOLD, v);
+ v = 0x0;
+ v |= (0x8 << FSX_COMM_RM_BURST_BD_THRESHOLD_LOW);
+ v |= (0x8 << FSX_COMM_RM_BURST_BD_THRESHOLD_HIGH);
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_BURST_BD_THRESHOLD, v);
+
+ /* Set memory configuration */
+ VERBOSE(" - set memory configuration\n");
+ v = 0x0;
+ v |= (1 << FSX_COMM_RM_MEMORY_CONFIGURATION__POWERONIN);
+ v |= (1 << FSX_COMM_RM_MEMORY_CONFIGURATION__POWEROKIN);
+ v |= (1 << FSX_COMM_RM_MEMORY_CONFIGURATION__ARRPOWERONIN);
+ v |= (1 << FSX_COMM_RM_MEMORY_CONFIGURATION__ARRPOWEROKIN);
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_MEMORY_CONFIGURATION, v);
+
+ /* AXI configuration for RM */
+ v = 0;
+ v |= (0x1 << FSX_COMM_RM_AXI_CONTROL__WRITE_CHANNEL_EN);
+ v |= (0x1 << FSX_COMM_RM_AXI_CONTROL__READ_CHANNEL_EN);
+ v |= (0xe << FSX_COMM_RM_AXI_CONTROL__AWQOS);
+ v |= (0xa << FSX_COMM_RM_AXI_CONTROL__ARQOS);
+ v |= (0x2 << FSX_COMM_RM_AXI_CONTROL__AWPROT);
+ v |= (0x2 << FSX_COMM_RM_AXI_CONTROL__ARPROT);
+ v |= (0xf << FSX_COMM_RM_AXI_CONTROL__AWCACHE);
+ v |= (0xf << FSX_COMM_RM_AXI_CONTROL__ARCACHE);
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_AXI_CONTROL, v);
+ VERBOSE(" - set AXI control = 0x%x\n",
+ mmio_read_32(fsx_comm_rm + FSX_COMM_RM_AXI_CONTROL));
+ v = 0x0;
+ v |= (0x10 << FSX_COMM_RM_AXI_READ_BURST_THRESHOLD__MAX);
+ v |= (0x10 << FSX_COMM_RM_AXI_READ_BURST_THRESHOLD__MIN);
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_AXI_READ_BURST_THRESHOLD, v);
+ VERBOSE(" - set AXI read burst threshold = 0x%x\n",
+ mmio_read_32(fsx_comm_rm + FSX_COMM_RM_AXI_READ_BURST_THRESHOLD));
+
+ /* Configure group ring count for all groups */
+ /* By default we schedule extended packets
+ * on all AEs/DMEs in a group.
+ */
+ v = (dme_count & 0xf) << 0;
+ v |= (dme_count & 0xf) << 4;
+ v |= (dme_count & 0xf) << 8;
+ v |= (dme_count & 0xf) << 12;
+ v |= (dme_count & 0xf) << 16;
+ v |= (dme_count & 0xf) << 20;
+ v |= (dme_count & 0xf) << 24;
+ v |= (dme_count & 0xf) << 28;
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_GROUP_RING_COUNT, v);
+
+ /*
+ * Due to HW issue spurious interrupts are getting generated.
+ * To fix sw needs to clear the config status interrupts
+ * before setting CONFIG_DONE.
+ */
+ mmio_write_32(fsx_comm_rm +
+ FSX_COMM_RM_CONFIG_INTERRUPT_STATUS_CLEAR,
+ 0xffffffff);
+
+ /* Configure RM control */
+ VERBOSE(" - configure RM control\n");
+ v = mmio_read_32(fsx_comm_rm + FSX_COMM_RM_CONTROL_REGISTER);
+ v |= (1 << FSX_COMM_RM_CONTROL_REGISTER__AE_LOCKING);
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_CONTROL_REGISTER, v);
+ v |= (1 << FSX_COMM_RM_CONTROL_REGISTER__CONFIG_DONE);
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_CONTROL_REGISTER, v);
+
+ /* Configure AE timeout */
+ VERBOSE(" - configure AE timeout\n");
+ v = 0x00003fff;
+ mmio_write_32(fsx_comm_rm + FSX_COMM_RM_AE_TIMEOUT, v);
+
+ /* Initialize all AEs */
+ for (i = 0; i < ae_count; i++) {
+ VERBOSE(" - initialize AE%d\n", i);
+ v = (0x1 << FSX_AEx_CONTROL_REGISTER__ACTIVE);
+ mmio_write_32(FSX_AEx_CONTROL_REGISTER(base, i), v);
+ }
+
+ /* Initialize all DMEs */
+ for (i = 0; i < dme_count; i++) {
+ VERBOSE(" - initialize DME%d\n", i);
+ v = 0;
+ v |= (0x1 << FSX_DMEx_AXI_CONTROL__WRITE_CHANNEL_EN);
+ v |= (0x1 << FSX_DMEx_AXI_CONTROL__READ_CHANNEL_EN);
+ v |= (0xe << FSX_DMEx_AXI_CONTROL__AWQOS);
+ v |= (0xa << FSX_DMEx_AXI_CONTROL__ARQOS);
+ v |= (0xf << FSX_DMEx_AXI_CONTROL__AWCACHE);
+ v |= (0xf << FSX_DMEx_AXI_CONTROL__ARCACHE);
+ mmio_write_32(FSX_DMEx_AXI_CONTROL(dme_base, i), v);
+ VERBOSE(" -- AXI_CONTROL = 0x%x\n",
+ mmio_read_32(FSX_DMEx_AXI_CONTROL(dme_base, i)));
+ v = 0;
+ v |= (0x4 << FSX_DMEx_WR_FIFO_THRESHOLD__MIN);
+ v |= (0x4 << FSX_DMEx_WR_FIFO_THRESHOLD__MAX);
+ mmio_write_32(FSX_DMEx_WR_FIFO_THRESHOLD(dme_base, i), v);
+ VERBOSE(" -- WR_FIFO_THRESHOLD = 0x%x\n",
+ mmio_read_32(FSX_DMEx_WR_FIFO_THRESHOLD(dme_base, i)));
+ v = 0;
+ v |= (0x4 << FSX_DMEx_RD_FIFO_THRESHOLD__MIN);
+ v |= (0x4 << FSX_DMEx_RD_FIFO_THRESHOLD__MAX);
+ mmio_write_32(FSX_DMEx_RD_FIFO_THRESHOLD(dme_base, i), v);
+ VERBOSE(" -- RD_FIFO_THRESHOLD = 0x%x\n",
+ mmio_read_32(FSX_DMEx_RD_FIFO_THRESHOLD(dme_base, i)));
+ }
+
+ /* Configure ring axi id and msi device id */
+ for (i = 0; i < ring_count; i++) {
+ VERBOSE(" - ring%d version=0x%x\n", i,
+ mmio_read_32(FSX_RINGx_VERSION_NUMBER(base, i)));
+ mmio_write_32(FSX_COMM_RINGx_MSI_DEV_ID(base, i),
+ msi_dev_id);
+ v = 0;
+ v |= ((i & FSX_COMM_RINGx_CONTROL__AXI_ID_MASK) <<
+ FSX_COMM_RINGx_CONTROL__AXI_ID);
+ mmio_write_32(FSX_COMM_RINGx_CONTROL(base, i), v);
+ }
+
+ INFO("fsx %s init done\n", fsx_type_names[fsx_type]);
+}
+
+void fsx_meminit(const char *name,
+ uintptr_t idm_io_control_direct,
+ uintptr_t idm_io_status)
+{
+ int try;
+ unsigned int val;
+
+ VERBOSE("fsx %s meminit start\n", name);
+
+ VERBOSE(" - arrpoweron\n");
+ mmio_setbits_32(idm_io_control_direct,
+ BIT(FS4_IDM_IO_CONTROL_DIRECT__MEM_ARRPOWERON));
+ while (!(mmio_read_32(idm_io_status) &
+ BIT(FS4_IDM_IO_STATUS__MEM_ARRPOWERON)))
+ ;
+
+ VERBOSE(" - arrpowerok\n");
+ mmio_setbits_32(idm_io_control_direct,
+ (1 << FS4_IDM_IO_CONTROL_DIRECT__MEM_ARRPOWEROK));
+ while (!(mmio_read_32(idm_io_status) &
+ BIT(FS4_IDM_IO_STATUS__MEM_ARRPOWEROK)))
+ ;
+
+ VERBOSE(" - poweron\n");
+ mmio_setbits_32(idm_io_control_direct,
+ (1 << FS4_IDM_IO_CONTROL_DIRECT__MEM_POWERON));
+ while (!(mmio_read_32(idm_io_status) &
+ BIT(FS4_IDM_IO_STATUS__MEM_POWERON)))
+ ;
+
+ VERBOSE(" - powerok\n");
+ mmio_setbits_32(idm_io_control_direct,
+ (1 << FS4_IDM_IO_CONTROL_DIRECT__MEM_POWEROK));
+ while (!(mmio_read_32(idm_io_status) &
+ BIT(FS4_IDM_IO_STATUS__MEM_POWEROK)))
+ ;
+
+ /* Final check on all power bits */
+ try = 10;
+ do {
+ val = mmio_read_32(idm_io_status);
+ if (val == FS4_IDM_IO_STATUS__MEM_ALLOK)
+ break;
+
+ /* Wait sometime */
+ mdelay(1);
+
+ try--;
+ } while (try > 0);
+
+ /* Remove memory isolation if things are fine. */
+ if (try <= 0) {
+ INFO(" - powerup failed\n");
+ } else {
+ VERBOSE(" - remove isolation\n");
+ mmio_clrbits_32(idm_io_control_direct,
+ (1 << FS4_IDM_IO_CONTROL_DIRECT__MEM_ISO));
+ VERBOSE(" - powerup done\n");
+ }
+
+ INFO("fsx %s meminit done\n", name);
+}
+
+void fs4_disable_clocks(bool disable_sram,
+ bool disable_crypto,
+ bool disable_raid)
+{
+ VERBOSE("fs4 disable clocks start\n");
+
+ if (disable_sram) {
+ VERBOSE(" - disable sram clock\n");
+ mmio_clrbits_32(FS4_SRAM_IDM_IO_CONTROL_DIRECT,
+ (1 << FS4_IDM_IO_CONTROL_DIRECT__SRAM_CLK_EN));
+ }
+
+ if (disable_crypto) {
+ VERBOSE(" - disable crypto clock\n");
+ mmio_setbits_32(CDRU_GENPLL5_CONTROL1,
+ CDRU_GENPLL5_CONTROL1__CHNL1_CRYPTO_AE_CLK);
+ }
+
+ if (disable_raid) {
+ VERBOSE(" - disable raid clock\n");
+ mmio_setbits_32(CDRU_GENPLL5_CONTROL1,
+ CDRU_GENPLL5_CONTROL1__CHNL2_RAID_AE_CLK);
+ }
+
+ if (disable_sram && disable_crypto && disable_raid) {
+ VERBOSE(" - disable root clock\n");
+ mmio_setbits_32(CDRU_GENPLL5_CONTROL1,
+ CDRU_GENPLL5_CONTROL1__CHNL0_DME_CLK);
+ mmio_setbits_32(CDRU_GENPLL2_CONTROL1,
+ CDRU_GENPLL2_CONTROL1__CHNL6_FS4_CLK);
+ }
+
+ INFO("fs4 disable clocks done\n");
+}
diff --git a/plat/brcm/board/stingray/src/ihost_pm.c b/plat/brcm/board/stingray/src/ihost_pm.c
new file mode 100644
index 0000000..9141d3e
--- /dev/null
+++ b/plat/brcm/board/stingray/src/ihost_pm.c
@@ -0,0 +1,355 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <dmu.h>
+#include <ihost_pm.h>
+#include <platform_def.h>
+
+#define CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_IHOST1 2
+#define CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_IHOST2 1
+#define CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_IHOST3 0
+#define CDRU_MISC_RESET_CONTROL__CDRU_IH1_RESET 9
+#define CDRU_MISC_RESET_CONTROL__CDRU_IH2_RESET 8
+#define CDRU_MISC_RESET_CONTROL__CDRU_IH3_RESET 7
+#define A72_CRM_SOFTRESETN_0 0x480
+#define A72_CRM_SOFTRESETN_1 0x484
+#define A72_CRM_DOMAIN_4_CONTROL 0x810
+#define A72_CRM_DOMAIN_4_CONTROL__DOMAIN_4_ISO_DFT 3
+#define A72_CRM_DOMAIN_4_CONTROL__DOMAIN_4_ISO_MEM 6
+#define A72_CRM_DOMAIN_4_CONTROL__DOMAIN_4_ISO_I_O 0
+#define A72_CRM_SUBSYSTEM_MEMORY_CONTROL_3 0xB4C
+#define MEMORY_PDA_HI_SHIFT 0x0
+#define A72_CRM_PLL_PWR_ON 0x70
+#define A72_CRM_PLL_PWR_ON__PLL0_ISO_PLLOUT 4
+#define A72_CRM_PLL_PWR_ON__PLL0_PWRON_LDO 1
+#define A72_CRM_PLL_PWR_ON__PLL0_PWRON_PLL 0
+#define A72_CRM_SUBSYSTEM_MEMORY_CONTROL_2 0xB48
+#define A72_CRM_PLL_INTERRUPT_STATUS 0x8c
+#define A72_CRM_PLL_INTERRUPT_STATUS__PLL0_LOCK_LOST_STATUS 8
+#define A72_CRM_PLL_INTERRUPT_STATUS__PLL0_LOCK_STATUS 9
+#define A72_CRM_INTERRUPT_ENABLE 0x4
+#define A72_CRM_INTERRUPT_ENABLE__PLL0_INT_ENABLE 4
+#define A72_CRM_PLL_INTERRUPT_ENABLE 0x88
+#define A72_CRM_PLL_INTERRUPT_ENABLE__PLL0_LOCK_STATUS_INT_ENB 9
+#define A72_CRM_PLL_INTERRUPT_ENABLE__PLL0_LOCK_LOST_STATUS_INT_ENB 8
+#define A72_CRM_PLL0_CFG0_CTRL 0x120
+#define A72_CRM_PLL0_CFG1_CTRL 0x124
+#define A72_CRM_PLL0_CFG2_CTRL 0x128
+#define A72_CRM_PLL0_CFG3_CTRL 0x12C
+#define A72_CRM_CORE_CONFIG_DBGCTRL__DBGROMADDRV 0
+#define A72_CRM_CORE_CONFIG_DBGCTRL 0xD50
+#define A72_CRM_CORE_CONFIG_DBGROM_LO 0xD54
+#define A72_CRM_CORE_CONFIG_DBGROM_HI 0xD58
+#define A72_CRM_SUBSYSTEM_CONFIG_1__DBGL1RSTDISABLE 2
+#define A72_CRM_SOFTRESETN_0__CRYSTAL26_SOFTRESETN 0
+#define A72_CRM_SOFTRESETN_0__CRM_PLL0_SOFTRESETN 1
+#define A72_CRM_AXI_CLK_DESC 0x304
+#define A72_CRM_ACP_CLK_DESC 0x308
+#define A72_CRM_ATB_CLK_DESC 0x30C
+#define A72_CRM_PCLKDBG_DESC 0x310
+#define A72_CRM_CLOCK_MODE_CONTROL 0x40
+#define A72_CRM_CLOCK_MODE_CONTROL__CLK_CHANGE_TRIGGER 0
+#define A72_CRM_CLOCK_CONTROL_0 0x200
+#define A72_CRM_CLOCK_CONTROL_0__ARM_HW_SW_ENABLE_SEL 0
+#define A72_CRM_CLOCK_CONTROL_0__AXI_HW_SW_ENABLE_SEL 2
+#define A72_CRM_CLOCK_CONTROL_0__ACP_HW_SW_ENABLE_SEL 4
+#define A72_CRM_CLOCK_CONTROL_0__ATB_HW_SW_ENABLE_SEL 6
+#define A72_CRM_CLOCK_CONTROL_0__PCLKDBG_HW_SW_ENA_SEL 8
+#define A72_CRM_CLOCK_CONTROL_1 0x204
+#define A72_CRM_CLOCK_CONTROL_1__TMON_HW_SW_ENABLE_SEL 6
+#define A72_CRM_CLOCK_CONTROL_1__APB_HW_SW_ENABLE_SEL 8
+#define A72_CRM_SOFTRESETN_0__CRYSTAL26_SOFTRESETN 0
+#define A72_CRM_SOFTRESETN_0__CRM_PLL0_SOFTRESETN 1
+#define A72_CRM_SOFTRESETN_0__AXI_SOFTRESETN 9
+#define A72_CRM_SOFTRESETN_0__ACP_SOFTRESETN 10
+#define A72_CRM_SOFTRESETN_0__ATB_SOFTRESETN 11
+#define A72_CRM_SOFTRESETN_0__PCLKDBG_SOFTRESETN 12
+#define A72_CRM_SOFTRESETN_0__TMON_SOFTRESETN 15
+#define A72_CRM_SOFTRESETN_0__L2_SOFTRESETN 3
+#define A72_CRM_SOFTRESETN_1__APB_SOFTRESETN 8
+
+/* core related regs */
+#define A72_CRM_DOMAIN_0_CONTROL 0x800
+#define A72_CRM_DOMAIN_0_CONTROL__DOMAIN_0_ISO_MEM 0x6
+#define A72_CRM_DOMAIN_0_CONTROL__DOMAIN_0_ISO_I_O 0x0
+#define A72_CRM_DOMAIN_1_CONTROL 0x804
+#define A72_CRM_DOMAIN_1_CONTROL__DOMAIN_1_ISO_MEM 0x6
+#define A72_CRM_DOMAIN_1_CONTROL__DOMAIN_1_ISO_I_O 0x0
+#define A72_CRM_CORE_CONFIG_RVBA0_LO 0xD10
+#define A72_CRM_CORE_CONFIG_RVBA0_MID 0xD14
+#define A72_CRM_CORE_CONFIG_RVBA0_HI 0xD18
+#define A72_CRM_CORE_CONFIG_RVBA1_LO 0xD20
+#define A72_CRM_CORE_CONFIG_RVBA1_MID 0xD24
+#define A72_CRM_CORE_CONFIG_RVBA1_HI 0xD28
+#define A72_CRM_SUBSYSTEM_CONFIG_0 0xC80
+#define A72_CRM_SUBSYSTEM_CONFIG_0__DBGPWRDUP_CFG_SHIFT 4
+#define A72_CRM_SOFTRESETN_0__COREPOR0_SOFTRESETN 4
+#define A72_CRM_SOFTRESETN_0__COREPOR1_SOFTRESETN 5
+#define A72_CRM_SOFTRESETN_1__CORE0_SOFTRESETN 0
+#define A72_CRM_SOFTRESETN_1__DEBUG0_SOFTRESETN 4
+#define A72_CRM_SOFTRESETN_1__CORE1_SOFTRESETN 1
+#define A72_CRM_SOFTRESETN_1__DEBUG1_SOFTRESETN 5
+
+#define SPROC_MEMORY_BISR 0
+
+static int cluster_power_status[PLAT_BRCM_CLUSTER_COUNT] = {CLUSTER_POWER_ON,
+ CLUSTER_POWER_OFF,
+ CLUSTER_POWER_OFF,
+ CLUSTER_POWER_OFF};
+
+void ihost_power_on_cluster(u_register_t mpidr)
+{
+ uint32_t rst, d2xs;
+ uint32_t cluster_id;
+ uint32_t ihost_base;
+#if SPROC_MEMORY_BISR
+ uint32_t bisr, cnt;
+#endif
+ cluster_id = MPIDR_AFFLVL1_VAL(mpidr);
+ uint32_t cluster0_freq_sel;
+
+ if (cluster_power_status[cluster_id] == CLUSTER_POWER_ON)
+ return;
+
+ cluster_power_status[cluster_id] = CLUSTER_POWER_ON;
+ INFO("enabling Cluster #%u\n", cluster_id);
+
+ switch (cluster_id) {
+ case 1:
+ rst = (1 << CDRU_MISC_RESET_CONTROL__CDRU_IH1_RESET);
+ d2xs = (1 << CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_IHOST1);
+#if SPROC_MEMORY_BISR
+ bisr = CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST1;
+#endif
+ break;
+ case 2:
+ rst = (1 << CDRU_MISC_RESET_CONTROL__CDRU_IH2_RESET);
+ d2xs = (1 << CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_IHOST2);
+#if SPROC_MEMORY_BISR
+ bisr = CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST2;
+#endif
+ break;
+ case 3:
+ rst = (1 << CDRU_MISC_RESET_CONTROL__CDRU_IH3_RESET);
+ d2xs = (1 << CDRU_CCN_REGISTER_CONTROL_1__D2XS_PD_IHOST3);
+#if SPROC_MEMORY_BISR
+ bisr = CRMU_BISR_PDG_MASK__CRMU_BISR_IHOST3;
+#endif
+ break;
+ default:
+ ERROR("Invalid cluster :%u\n", cluster_id);
+ return;
+ }
+
+ /* Releasing ihost resets */
+ mmio_setbits_32(CDRU_MISC_RESET_CONTROL, rst);
+
+ /* calculate cluster/ihost base address */
+ ihost_base = IHOST0_BASE + cluster_id * IHOST_ADDR_SPACE;
+
+ /* Remove Cluster IO isolation */
+ mmio_clrsetbits_32(ihost_base + A72_CRM_DOMAIN_4_CONTROL,
+ (1 << A72_CRM_DOMAIN_4_CONTROL__DOMAIN_4_ISO_I_O),
+ (1 << A72_CRM_DOMAIN_4_CONTROL__DOMAIN_4_ISO_DFT) |
+ (1 << A72_CRM_DOMAIN_4_CONTROL__DOMAIN_4_ISO_MEM));
+
+ /*
+ * Since BISR sequence requires that all cores of cluster should
+ * have removed I/O isolation hence doing same here.
+ */
+ /* Remove core0 memory IO isolations */
+ mmio_clrsetbits_32(ihost_base + A72_CRM_DOMAIN_0_CONTROL,
+ (1 << A72_CRM_DOMAIN_0_CONTROL__DOMAIN_0_ISO_I_O),
+ (1 << A72_CRM_DOMAIN_0_CONTROL__DOMAIN_0_ISO_MEM));
+
+ /* Remove core1 memory IO isolations */
+ mmio_clrsetbits_32(ihost_base + A72_CRM_DOMAIN_1_CONTROL,
+ (1 << A72_CRM_DOMAIN_1_CONTROL__DOMAIN_1_ISO_I_O),
+ (1 << A72_CRM_DOMAIN_1_CONTROL__DOMAIN_1_ISO_MEM));
+
+#if SPROC_MEMORY_BISR
+ mmio_setbits_32(CRMU_BISR_PDG_MASK, (1 << bisr));
+
+ if (!(mmio_read_32(CDRU_CHIP_STRAP_DATA_LSW) &
+ (1 << CDRU_CHIP_STRAP_DATA_LSW__BISR_BYPASS_MODE))) {
+ /* BISR completion would take max 2 usec */
+ cnt = 0;
+ while (cnt < 2) {
+ udelay(1);
+ if (mmio_read_32(CRMU_CHIP_OTPC_STATUS) &
+ (1 << CRMU_CHIP_OTPC_STATUS__OTP_BISR_LOAD_DONE))
+ break;
+ cnt++;
+ }
+ }
+
+ /* if BISR is not completed, need to be checked with ASIC team */
+ if (((mmio_read_32(CRMU_CHIP_OTPC_STATUS)) &
+ (1 << CRMU_CHIP_OTPC_STATUS__OTP_BISR_LOAD_DONE)) == 0) {
+ WARN("BISR did not completed and need to be addressed\n");
+ }
+#endif
+
+ /* PLL Power up. supply is already on. Turn on PLL LDO/PWR */
+ mmio_write_32(ihost_base + A72_CRM_PLL_PWR_ON,
+ (1 << A72_CRM_PLL_PWR_ON__PLL0_ISO_PLLOUT) |
+ (1 << A72_CRM_PLL_PWR_ON__PLL0_PWRON_LDO) |
+ (1 << A72_CRM_PLL_PWR_ON__PLL0_PWRON_PLL));
+
+ /* 1us in spec; Doubling it to be safe*/
+ udelay(2);
+
+ /* Remove PLL output ISO */
+ mmio_write_32(ihost_base + A72_CRM_PLL_PWR_ON,
+ (1 << A72_CRM_PLL_PWR_ON__PLL0_PWRON_LDO) |
+ (1 << A72_CRM_PLL_PWR_ON__PLL0_PWRON_PLL));
+
+ /*
+ * PLL0 Configuration Control Register
+ * these 4 registers drive the i_pll_ctrl[63:0] input of pll
+ * (16b per register).
+ * the values are derived from the spec (sections 8 and 10).
+ */
+
+ mmio_write_32(ihost_base + A72_CRM_PLL0_CFG0_CTRL, 0x00000000);
+ mmio_write_32(ihost_base + A72_CRM_PLL0_CFG1_CTRL, 0x00008400);
+ mmio_write_32(ihost_base + A72_CRM_PLL0_CFG2_CTRL, 0x00000001);
+ mmio_write_32(ihost_base + A72_CRM_PLL0_CFG3_CTRL, 0x00000000);
+
+ /* Read the freq_sel from cluster 0, which is up already */
+ cluster0_freq_sel = bcm_get_ihost_pll_freq(0);
+ bcm_set_ihost_pll_freq(cluster_id, cluster0_freq_sel);
+
+ udelay(1);
+
+ /* Release clock source reset */
+ mmio_setbits_32(ihost_base + A72_CRM_SOFTRESETN_0,
+ (1 << A72_CRM_SOFTRESETN_0__CRYSTAL26_SOFTRESETN) |
+ (1 << A72_CRM_SOFTRESETN_0__CRM_PLL0_SOFTRESETN));
+
+ udelay(1);
+
+ /*
+ * Integer division for clks (divider value = n+1).
+ * These are the divisor of ARM PLL clock frequecy.
+ */
+ mmio_write_32(ihost_base + A72_CRM_AXI_CLK_DESC, 0x00000001);
+ mmio_write_32(ihost_base + A72_CRM_ACP_CLK_DESC, 0x00000001);
+ mmio_write_32(ihost_base + A72_CRM_ATB_CLK_DESC, 0x00000004);
+ mmio_write_32(ihost_base + A72_CRM_PCLKDBG_DESC, 0x0000000b);
+
+ /*
+ * clock change trigger - must set to take effect after clock
+ * source change
+ */
+ mmio_setbits_32(ihost_base + A72_CRM_CLOCK_MODE_CONTROL,
+ (1 << A72_CRM_CLOCK_MODE_CONTROL__CLK_CHANGE_TRIGGER));
+
+ /* turn on functional clocks */
+ mmio_setbits_32(ihost_base + A72_CRM_CLOCK_CONTROL_0,
+ (3 << A72_CRM_CLOCK_CONTROL_0__ARM_HW_SW_ENABLE_SEL) |
+ (3 << A72_CRM_CLOCK_CONTROL_0__AXI_HW_SW_ENABLE_SEL) |
+ (3 << A72_CRM_CLOCK_CONTROL_0__ACP_HW_SW_ENABLE_SEL) |
+ (3 << A72_CRM_CLOCK_CONTROL_0__ATB_HW_SW_ENABLE_SEL) |
+ (3 << A72_CRM_CLOCK_CONTROL_0__PCLKDBG_HW_SW_ENA_SEL));
+
+ mmio_setbits_32(ihost_base + A72_CRM_CLOCK_CONTROL_1,
+ (3 << A72_CRM_CLOCK_CONTROL_1__TMON_HW_SW_ENABLE_SEL) |
+ (3 << A72_CRM_CLOCK_CONTROL_1__APB_HW_SW_ENABLE_SEL));
+
+ /* Program D2XS Power Down Registers */
+ mmio_setbits_32(CDRU_CCN_REGISTER_CONTROL_1, d2xs);
+
+ /* Program Core Config Debug ROM Address Registers */
+ /* mark valid for Debug ROM base address */
+ mmio_write_32(ihost_base + A72_CRM_CORE_CONFIG_DBGCTRL,
+ (1 << A72_CRM_CORE_CONFIG_DBGCTRL__DBGROMADDRV));
+
+ /* Program Lo and HI address of coresight DBG rom address */
+ mmio_write_32(ihost_base + A72_CRM_CORE_CONFIG_DBGROM_LO,
+ (CORESIGHT_BASE_ADDR >> 12) & 0xffff);
+ mmio_write_32(ihost_base + A72_CRM_CORE_CONFIG_DBGROM_HI,
+ (CORESIGHT_BASE_ADDR >> 28) & 0xffff);
+
+ /*
+ * Release soft resets of different components.
+ * Order: Bus clocks --> PERIPH --> L2 --> cores
+ */
+
+ /* Bus clocks soft resets */
+ mmio_setbits_32(ihost_base + A72_CRM_SOFTRESETN_0,
+ (1 << A72_CRM_SOFTRESETN_0__CRYSTAL26_SOFTRESETN) |
+ (1 << A72_CRM_SOFTRESETN_0__CRM_PLL0_SOFTRESETN) |
+ (1 << A72_CRM_SOFTRESETN_0__AXI_SOFTRESETN) |
+ (1 << A72_CRM_SOFTRESETN_0__ACP_SOFTRESETN) |
+ (1 << A72_CRM_SOFTRESETN_0__ATB_SOFTRESETN) |
+ (1 << A72_CRM_SOFTRESETN_0__PCLKDBG_SOFTRESETN));
+
+ mmio_setbits_32(ihost_base + A72_CRM_SOFTRESETN_1,
+ (1 << A72_CRM_SOFTRESETN_1__APB_SOFTRESETN));
+
+ /* Periph component softreset */
+ mmio_setbits_32(ihost_base + A72_CRM_SOFTRESETN_0,
+ (1 << A72_CRM_SOFTRESETN_0__TMON_SOFTRESETN));
+
+ /* L2 softreset */
+ mmio_setbits_32(ihost_base + A72_CRM_SOFTRESETN_0,
+ (1 << A72_CRM_SOFTRESETN_0__L2_SOFTRESETN));
+
+ /* Enable and program Satellite timer */
+ ihost_enable_satellite_timer(cluster_id);
+}
+
+void ihost_power_on_secondary_core(u_register_t mpidr, uint64_t rvbar)
+{
+ uint32_t ihost_base;
+ uint32_t coreid = MPIDR_AFFLVL0_VAL(mpidr);
+ uint32_t cluster_id = MPIDR_AFFLVL1_VAL(mpidr);
+
+ ihost_base = IHOST0_BASE + cluster_id * IHOST_ADDR_SPACE;
+ INFO("programming core #%u\n", coreid);
+
+ if (coreid) {
+ /* program the entry point for core1 */
+ mmio_write_32(ihost_base + A72_CRM_CORE_CONFIG_RVBA1_LO,
+ rvbar & 0xFFFF);
+ mmio_write_32(ihost_base + A72_CRM_CORE_CONFIG_RVBA1_MID,
+ (rvbar >> 16) & 0xFFFF);
+ mmio_write_32(ihost_base + A72_CRM_CORE_CONFIG_RVBA1_HI,
+ (rvbar >> 32) & 0xFFFF);
+ } else {
+ /* program the entry point for core */
+ mmio_write_32(ihost_base + A72_CRM_CORE_CONFIG_RVBA0_LO,
+ rvbar & 0xFFFF);
+ mmio_write_32(ihost_base + A72_CRM_CORE_CONFIG_RVBA0_MID,
+ (rvbar >> 16) & 0xFFFF);
+ mmio_write_32(ihost_base + A72_CRM_CORE_CONFIG_RVBA0_HI,
+ (rvbar >> 32) & 0xFFFF);
+ }
+
+ /* Tell debug logic which processor is up */
+ mmio_setbits_32(ihost_base + A72_CRM_SUBSYSTEM_CONFIG_0,
+ (coreid ?
+ (2 << A72_CRM_SUBSYSTEM_CONFIG_0__DBGPWRDUP_CFG_SHIFT) :
+ (1 << A72_CRM_SUBSYSTEM_CONFIG_0__DBGPWRDUP_CFG_SHIFT)));
+
+ /* releasing soft resets for IHOST core */
+ mmio_setbits_32(ihost_base + A72_CRM_SOFTRESETN_0,
+ (coreid ?
+ (1 << A72_CRM_SOFTRESETN_0__COREPOR1_SOFTRESETN) :
+ (1 << A72_CRM_SOFTRESETN_0__COREPOR0_SOFTRESETN)));
+
+ mmio_setbits_32(ihost_base + A72_CRM_SOFTRESETN_1,
+ (coreid ?
+ ((1 << A72_CRM_SOFTRESETN_1__CORE1_SOFTRESETN) |
+ (1 << A72_CRM_SOFTRESETN_1__DEBUG1_SOFTRESETN)) :
+ ((1 << A72_CRM_SOFTRESETN_1__CORE0_SOFTRESETN) |
+ (1 << A72_CRM_SOFTRESETN_1__DEBUG0_SOFTRESETN))));
+}
diff --git a/plat/brcm/board/stingray/src/iommu.c b/plat/brcm/board/stingray/src/iommu.c
new file mode 100644
index 0000000..de8b995
--- /dev/null
+++ b/plat/brcm/board/stingray/src/iommu.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <iommu.h>
+#include <platform_def.h>
+
+#define SMMU_BASE 0x64000000
+#define ARM_SMMU_MAX_NUM_CNTXT_BANK 64
+#define SMMU_CTX_BANK_IDX_SECURE_CRMU 63
+#define ARM_SMMU_NUM_SECURE_MASTER 1
+#define ARM_SMMU_NSNUMCBO (ARM_SMMU_MAX_NUM_CNTXT_BANK - \
+ ARM_SMMU_NUM_SECURE_MASTER)
+#define ARM_SMMU_NSNUMSMRGO (ARM_SMMU_MAX_NUM_CNTXT_BANK - \
+ ARM_SMMU_NUM_SECURE_MASTER)
+/* Reserved Banks. */
+#define SMMU_CTX_BANK_IDX (SMMU_CTX_BANK_IDX_SECURE_CRMU - \
+ ARM_SMMU_NUM_SECURE_MASTER)
+#define NUM_OF_SMRS 1
+
+#define STG1_WITH_STG2_BYPASS 1
+#define ARM_LPAE_PGTBL_PHYS_CRMU 0x880000000
+#define ARM_LPAE_PGTBL_PHYS 0x880200000
+#define ARM_LPAE_PGTBL_PTE_CNT 512
+#define ARM_LPAE_PTE_L1_BLOCK_SIZE 0x40000000
+#define ARM_LPAE_PTE_L1_ADDR_MASK 0x0000FFFFC0000000UL
+#define ARM_LPAE_PTE_TABLE 0x2UL
+#define ARM_LPAE_PTE_VALID 0x1UL
+#define ARM_LPAE_PTE_ATTRINDX 2
+#define ARM_LPAE_PTE_NS 5
+#define ARM_LPAE_PTE_AP 6
+#define ARM_LPAE_PTE_AP_EL1_RW 0x0
+#define ARM_LPAE_PTE_AP_EL0_RW 0x1
+#define ARM_LPAE_PTE_SH 8
+#define ARM_LPAE_PTE_SH_NON 0x0
+#define ARM_LPAE_PTE_SH_OUTER 0x2
+#define ARM_LPAE_PTE_SH_INNER 0x3
+#define ARM_LPAE_PTE_AF 10
+#define ARM_SMMU_RES_SIZE 0x80000
+
+#define ARM_LPAE_PTE_NSTABLE 0x8000000000000000UL
+#define ARM_LPAE_PTE_L1_INDEX_SHIFT 30
+#define ARM_LPAE_PTE_L1_INDEX_MASK 0x1ff
+#define ARM_LPAE_PTE_L0_INDEX_SHIFT 39
+#define ARM_LPAE_PTE_L0_INDEX_MASK 0x1ff
+#define ARM_LPAE_PTE_TABLE_MASK ~(0xfffUL)
+/* Configuration registers */
+#define ARM_SMMU_GR0_sCR0 0x0
+#define sCR0_CLIENTPD (1 << 0)
+#define sCR0_GFRE (1 << 1)
+#define sCR0_GFIE (1 << 2)
+#define sCR0_GCFGFRE (1 << 4)
+#define sCR0_GCFGFIE (1 << 5)
+#define sCR0_USFCFG (1 << 10)
+#define sCR0_VMIDPNE (1 << 11)
+#define sCR0_PTM (1 << 12)
+#define sCR0_FB (1 << 13)
+#define sCR0_VMID16EN (1 << 31)
+#define sCR0_BSU_SHIFT 14
+#define sCR0_BSU_MASK 0x3
+#define ARM_SMMU_SMMU_SCR1 0x4
+#define SCR1_NSNUMCBO_MASK 0xFF
+#define SCR1_NSNUMCBO_SHIFT 0x0
+#define SCR1_NSNUMSMRGO_MASK 0xFF00
+#define SCR1_NSNUMSMRGO_SHIFT 0x8
+
+/* Identification registers */
+#define ARM_SMMU_GR0_ID0 0x20
+#define ARM_SMMU_GR0_ID1 0x24
+#define ARM_SMMU_GR0_ID2 0x28
+#define ARM_SMMU_GR0_ID3 0x2c
+#define ARM_SMMU_GR0_ID4 0x30
+#define ARM_SMMU_GR0_ID5 0x34
+#define ARM_SMMU_GR0_ID6 0x38
+#define ARM_SMMU_GR0_ID7 0x3c
+#define ARM_SMMU_GR0_sGFSR 0x48
+#define ARM_SMMU_GR0_sGFSYNR0 0x50
+#define ARM_SMMU_GR0_sGFSYNR1 0x54
+#define ARM_SMMU_GR0_sGFSYNR2 0x58
+
+#define ID1_PAGESIZE (1U << 31)
+#define ID1_NUMPAGENDXB_SHIFT 28
+#define ID1_NUMPAGENDXB_MASK 7
+#define ID1_NUMS2CB_SHIFT 16
+#define ID1_NUMS2CB_MASK 0xff
+#define ID1_NUMCB_SHIFT 0
+#define ID1_NUMCB_MASK 0xff
+
+/* SMMU global address space */
+#define ARM_SMMU_GR0(smmu) ((smmu)->base)
+#define ARM_SMMU_GR1(smmu) ((smmu)->base + (1 << (smmu)->pgshift))
+
+/* Stream mapping registers */
+#define ARM_SMMU_GR0_SMR(n) (0x800 + (n << 2))
+#define SMR_VALID (1U << 31)
+#define SMR_MASK_SHIFT 16
+#define SMR_ID_SHIFT 0
+
+#define ARM_SMMU_GR0_S2CR(n) (0xc00 + (n << 2))
+#define S2CR_CBNDX_SHIFT 0
+#define S2CR_CBNDX_MASK 0xff
+#define S2CR_TYPE_SHIFT 16
+#define S2CR_TYPE_MASK 0x3
+
+#define ARM_SMMU_GR1_CBA2R(n) (0x800 + (n << 2))
+#define CBA2R_RW64_32BIT (0 << 0)
+#define CBA2R_RW64_64BIT (1 << 0)
+#define CBA2R_VMID_SHIFT 16
+#define CBA2R_VMID_MASK 0xffff
+
+#define ARM_SMMU_GR1_CBAR(n) (0x0 + (n << 2))
+#define CBAR_VMID_SHIFT 0
+#define CBAR_VMID_MASK 0xff
+#define CBAR_S1_BPSHCFG_SHIFT 8
+#define CBAR_S1_BPSHCFG_MASK 3
+#define CBAR_S1_BPSHCFG_NSH 3
+#define CBAR_S1_MEMATTR_SHIFT 12
+#define CBAR_S1_MEMATTR_MASK 0xf
+#define CBAR_S1_MEMATTR_WB 0xf
+#define CBAR_TYPE_SHIFT 16
+#define CBAR_TYPE_MASK 0x3
+#define CBAR_TYPE_S2_TRANS (0 << CBAR_TYPE_SHIFT)
+#define CBAR_TYPE_S1_TRANS_S2_BYPASS (1 << CBAR_TYPE_SHIFT)
+#define CBAR_TYPE_S1_TRANS_S2_FAULT (2 << CBAR_TYPE_SHIFT)
+#define CBAR_TYPE_S1_TRANS_S2_TRANS (3 << CBAR_TYPE_SHIFT)
+#define CBAR_IRPTNDX_SHIFT 24
+#define CBAR_IRPTNDX_MASK 0xff
+
+/* Translation context bank */
+#define ARM_SMMU_CB_BASE(smmu) ((smmu)->base + ((smmu)->size >> 1))
+#define ARM_SMMU_CB(smmu, n) ((n) * (1 << (smmu)->pgshift))
+
+#define ARM_SMMU_CB_SCTLR 0x0
+#define ARM_SMMU_CB_ACTLR 0x4
+#define ARM_SMMU_CB_RESUME 0x8
+#define ARM_SMMU_CB_TTBCR2 0x10
+#define ARM_SMMU_CB_TTBR0 0x20
+#define ARM_SMMU_CB_TTBR1 0x28
+#define ARM_SMMU_CB_TTBCR 0x30
+#define ARM_SMMU_CB_CONTEXTIDR 0x34
+#define ARM_SMMU_CB_S1_MAIR0 0x38
+#define ARM_SMMU_CB_S1_MAIR1 0x3c
+#define ARM_SMMU_CB_PAR 0x50
+#define ARM_SMMU_CB_FSR 0x58
+#define ARM_SMMU_CB_FAR 0x60
+#define ARM_SMMU_CB_FSYNR0 0x68
+#define ARM_SMMU_CB_S1_TLBIVA 0x600
+#define ARM_SMMU_CB_S1_TLBIASID 0x610
+#define ARM_SMMU_CB_S1_TLBIVAL 0x620
+#define ARM_SMMU_CB_S2_TLBIIPAS2 0x630
+#define ARM_SMMU_CB_S2_TLBIIPAS2L 0x638
+#define ARM_SMMU_CB_ATS1PR 0x800
+#define ARM_SMMU_CB_ATSR 0x8f0
+
+#define SCTLR_S1_ASIDPNE (1 << 12)
+#define SCTLR_CFCFG (1 << 7)
+#define SCTLR_CFIE (1 << 6)
+#define SCTLR_CFRE (1 << 5)
+#define SCTLR_E (1 << 4)
+#define SCTLR_AFE (1 << 2)
+#define SCTLR_TRE (1 << 1)
+#define SCTLR_M (1 << 0)
+
+/* ARM LPAE configuration. */
+/**************************************************************/
+/* Register bits */
+#define ARM_32_LPAE_TCR_EAE (1 << 31)
+#define ARM_64_LPAE_S2_TCR_RES1 (1 << 31)
+
+#define ARM_LPAE_TCR_EPD1 (1 << 23)
+
+#define ARM_LPAE_TCR_TG0_4K (0 << 14)
+#define ARM_LPAE_TCR_TG0_64K (1 << 14)
+#define ARM_LPAE_TCR_TG0_16K (2 << 14)
+
+#define ARM_LPAE_TCR_SH0_SHIFT 12
+#define ARM_LPAE_TCR_SH0_MASK 0x3
+#define ARM_LPAE_TCR_SH_NS 0
+#define ARM_LPAE_TCR_SH_OS 2
+#define ARM_LPAE_TCR_SH_IS 3
+
+#define ARM_LPAE_TCR_ORGN0_SHIFT 10
+#define ARM_LPAE_TCR_IRGN0_SHIFT 8
+#define ARM_LPAE_TCR_RGN_MASK 0x3
+#define ARM_LPAE_TCR_RGN_NC 0
+#define ARM_LPAE_TCR_RGN_WBWA 1
+#define ARM_LPAE_TCR_RGN_WT 2
+#define ARM_LPAE_TCR_RGN_WB 3
+
+#define ARM_LPAE_TCR_SL0_SHIFT 6
+#define ARM_LPAE_TCR_SL0_MASK 0x3
+
+#define ARM_LPAE_TCR_T0SZ_SHIFT 0
+#define ARM_LPAE_TCR_SZ_MASK 0xf
+
+#define ARM_LPAE_TCR_PS_SHIFT 16
+#define ARM_LPAE_TCR_PS_MASK 0x7
+
+#define ARM_LPAE_TCR_IPS_SHIFT 32
+#define ARM_LPAE_TCR_IPS_MASK 0x7
+
+#define ARM_LPAE_TCR_PS_32_BIT 0x0ULL
+#define ARM_LPAE_TCR_PS_36_BIT 0x1ULL
+#define ARM_LPAE_TCR_PS_40_BIT 0x2ULL
+#define ARM_LPAE_TCR_PS_42_BIT 0x3ULL
+#define ARM_LPAE_TCR_PS_44_BIT 0x4ULL
+#define ARM_LPAE_TCR_PS_48_BIT 0x5ULL
+
+#define ARM_LPAE_MAIR_ATTR_SHIFT(n) ((n) << 3)
+#define ARM_LPAE_MAIR_ATTR_MASK 0xff
+#define ARM_LPAE_MAIR_ATTR_DEVICE 0x04
+#define ARM_LPAE_MAIR_ATTR_NC 0x44
+#define ARM_LPAE_MAIR_ATTR_WBRWA 0xff
+#define ARM_LPAE_MAIR_ATTR_IDX_NC 0
+#define ARM_LPAE_MAIR_ATTR_IDX_CACHE 1
+#define ARM_LPAE_MAIR_ATTR_IDX_DEV 2
+
+#define TTBRn_ASID_SHIFT 48
+#define TTBCR2_SEP_SHIFT 15
+#define TTBCR2_SEP_UPSTREAM (0x7 << TTBCR2_SEP_SHIFT)
+#define TTBCR2_AS (1 << 4)
+#define TTBCR_T0SZ(ia_bits) (64 - (ia_bits))
+
+#define S2CR_PRIVCFG_SHIFT 24
+#define S2CR_PRIVCFG_MASK 0x3
+
+/**************************************************************/
+
+uint16_t paxc_stream_ids[] = { 0x2000 };
+
+uint16_t paxc_stream_ids_mask[] = { 0x1fff };
+uint16_t crmu_stream_ids[] = { CRMU_STREAM_ID };
+uint16_t crmu_stream_ids_mask[] = { 0x0 };
+
+enum arm_smmu_s2cr_type {
+ S2CR_TYPE_TRANS,
+ S2CR_TYPE_BYPASS,
+ S2CR_TYPE_FAULT,
+};
+
+enum arm_smmu_s2cr_privcfg {
+ S2CR_PRIVCFG_DEFAULT,
+ S2CR_PRIVCFG_DIPAN,
+ S2CR_PRIVCFG_UNPRIV,
+ S2CR_PRIVCFG_PRIV,
+};
+
+struct arm_smmu_smr {
+ uint16_t mask;
+ uint16_t id;
+ uint32_t valid;
+};
+
+struct arm_smmu_s2cr {
+ int count;
+ enum arm_smmu_s2cr_type type;
+ enum arm_smmu_s2cr_privcfg privcfg;
+ uint8_t cbndx;
+};
+
+struct arm_smmu_cfg {
+ uint8_t cbndx;
+ uint8_t irptndx;
+ uint32_t cbar;
+};
+
+struct arm_smmu_device {
+ uint8_t *base;
+ uint32_t streams;
+ unsigned long size;
+ unsigned long pgshift;
+ unsigned long va_size;
+ unsigned long ipa_size;
+ unsigned long pa_size;
+ struct arm_smmu_smr smr[NUM_OF_SMRS];
+ struct arm_smmu_s2cr s2cr[NUM_OF_SMRS];
+ struct arm_smmu_cfg cfg[NUM_OF_SMRS];
+ uint16_t *stream_ids;
+ uint16_t *stream_ids_mask;
+};
+
+void arm_smmu_enable_secure_client_port(void)
+{
+ uintptr_t smmu_base = SMMU_BASE;
+
+ mmio_clrbits_32(smmu_base, sCR0_CLIENTPD);
+}
+
+void arm_smmu_reserve_secure_cntxt(void)
+{
+ uintptr_t smmu_base = SMMU_BASE;
+
+ mmio_clrsetbits_32(smmu_base + ARM_SMMU_SMMU_SCR1,
+ (SCR1_NSNUMSMRGO_MASK | SCR1_NSNUMCBO_MASK),
+ ((ARM_SMMU_NSNUMCBO << SCR1_NSNUMCBO_SHIFT) |
+ (ARM_SMMU_NSNUMSMRGO << SCR1_NSNUMSMRGO_SHIFT)));
+}
+
+static void arm_smmu_smr_cfg(struct arm_smmu_device *smmu, uint32_t index)
+{
+ uint32_t idx = smmu->cfg[index].cbndx;
+ struct arm_smmu_smr *smr = &smmu->smr[index];
+ uint32_t reg = smr->id << SMR_ID_SHIFT | smr->mask << SMR_MASK_SHIFT;
+
+ if (smr->valid)
+ reg |= SMR_VALID;
+
+ mmio_write_32((uintptr_t) (ARM_SMMU_GR0(smmu) +
+ ARM_SMMU_GR0_SMR(idx)), reg);
+}
+
+static void arm_smmu_s2cr_cfg(struct arm_smmu_device *smmu, uint32_t index)
+{
+ uint32_t idx = smmu->cfg[index].cbndx;
+ struct arm_smmu_s2cr *s2cr = &smmu->s2cr[index];
+
+ uint32_t reg = (s2cr->type & S2CR_TYPE_MASK) << S2CR_TYPE_SHIFT |
+ (s2cr->cbndx & S2CR_CBNDX_MASK) << S2CR_CBNDX_SHIFT |
+ (s2cr->privcfg & S2CR_PRIVCFG_MASK) << S2CR_PRIVCFG_SHIFT;
+
+ mmio_write_32((uintptr_t) (ARM_SMMU_GR0(smmu) +
+ ARM_SMMU_GR0_S2CR(idx)), reg);
+}
+
+static void smmu_set_pgtbl(struct arm_smmu_device *smmu,
+ enum iommu_domain dom,
+ uint64_t *pg_table_base)
+{
+ int i, l0_index, l1_index;
+ uint64_t addr, *pte, *l0_base, *l1_base;
+ uint64_t addr_space_limit;
+
+ if (dom == PCIE_PAXC) {
+ addr_space_limit = 0xffffffffff;
+ } else if (dom == DOMAIN_CRMU) {
+ addr_space_limit = 0xffffffff;
+ } else {
+ ERROR("dom is not supported\n");
+ return;
+ }
+
+ l0_base = pg_table_base;
+ /* clear L0 descriptors. */
+ for (i = 0; i < ARM_LPAE_PGTBL_PTE_CNT; i++)
+ l0_base[i] = 0x0;
+
+ addr = 0x0;
+ while (addr < addr_space_limit) {
+ /* find L0 pte */
+ l0_index = ((addr >> ARM_LPAE_PTE_L0_INDEX_SHIFT) &
+ ARM_LPAE_PTE_L0_INDEX_MASK);
+ l1_base = l0_base + ((l0_index + 1) * ARM_LPAE_PGTBL_PTE_CNT);
+
+ /* setup L0 pte if required */
+ pte = l0_base + l0_index;
+ if (*pte == 0x0) {
+ *pte |= ((uint64_t)l1_base & ARM_LPAE_PTE_TABLE_MASK);
+ if (dom == PCIE_PAXC)
+ *pte |= ARM_LPAE_PTE_NSTABLE;
+ *pte |= ARM_LPAE_PTE_TABLE;
+ *pte |= ARM_LPAE_PTE_VALID;
+ }
+
+ /* find L1 pte */
+ l1_index = ((addr >> ARM_LPAE_PTE_L1_INDEX_SHIFT) &
+ ARM_LPAE_PTE_L1_INDEX_MASK);
+ pte = l1_base + l1_index;
+
+ /* setup L1 pte */
+ *pte = 0x0;
+ *pte |= (addr & ARM_LPAE_PTE_L1_ADDR_MASK);
+ if (addr < 0x80000000) {
+ *pte |= (ARM_LPAE_MAIR_ATTR_IDX_DEV <<
+ ARM_LPAE_PTE_ATTRINDX);
+ if (dom == PCIE_PAXC)
+ *pte |= (1 << ARM_LPAE_PTE_NS);
+ } else {
+ *pte |= (ARM_LPAE_MAIR_ATTR_IDX_CACHE <<
+ ARM_LPAE_PTE_ATTRINDX);
+ *pte |= (1 << ARM_LPAE_PTE_NS);
+ }
+ *pte |= (ARM_LPAE_PTE_AP_EL0_RW << ARM_LPAE_PTE_AP);
+ *pte |= (ARM_LPAE_PTE_SH_INNER << ARM_LPAE_PTE_SH);
+ *pte |= (1 << ARM_LPAE_PTE_AF);
+ *pte |= ARM_LPAE_PTE_VALID;
+
+ addr += ARM_LPAE_PTE_L1_BLOCK_SIZE;
+ }
+}
+
+void arm_smmu_create_identity_map(enum iommu_domain dom)
+{
+ struct arm_smmu_device iommu;
+ struct arm_smmu_device *smmu = &iommu;
+ uint32_t reg, reg2;
+ unsigned long long reg64;
+ uint32_t idx;
+ uint16_t asid;
+ unsigned int context_bank_index;
+ unsigned long long pg_table_base;
+
+ smmu->base = (uint8_t *) SMMU_BASE;
+ reg = mmio_read_32((uintptr_t) (ARM_SMMU_GR0(smmu) + ARM_SMMU_GR0_ID1));
+ smmu->pgshift = (reg & ID1_PAGESIZE) ? 16 : 12;
+ smmu->size = ARM_SMMU_RES_SIZE;
+ smmu->stream_ids = NULL;
+
+ switch (dom) {
+ case PCIE_PAXC:
+ smmu->stream_ids = &paxc_stream_ids[0];
+ smmu->stream_ids_mask = &paxc_stream_ids_mask[0];
+ smmu->streams = ARRAY_SIZE(paxc_stream_ids);
+ context_bank_index = SMMU_CTX_BANK_IDX;
+ pg_table_base = ARM_LPAE_PGTBL_PHYS;
+ break;
+ case DOMAIN_CRMU:
+ smmu->stream_ids = &crmu_stream_ids[0];
+ smmu->stream_ids_mask = &crmu_stream_ids_mask[0];
+ smmu->streams = ARRAY_SIZE(crmu_stream_ids);
+ context_bank_index = SMMU_CTX_BANK_IDX_SECURE_CRMU;
+ pg_table_base = ARM_LPAE_PGTBL_PHYS_CRMU;
+ break;
+ default:
+ ERROR("domain not supported\n");
+ return;
+ }
+
+ if (smmu->streams > NUM_OF_SMRS) {
+ INFO("can not support more than %d sids\n", NUM_OF_SMRS);
+ return;
+ }
+
+ /* set up iommu dev. */
+ for (idx = 0; idx < smmu->streams; idx++) {
+ /* S2CR. */
+ smmu->s2cr[idx].type = S2CR_TYPE_TRANS;
+ smmu->s2cr[idx].privcfg = S2CR_PRIVCFG_DEFAULT;
+ smmu->s2cr[idx].cbndx = context_bank_index;
+ smmu->cfg[idx].cbndx = context_bank_index;
+ smmu->cfg[idx].cbar = STG1_WITH_STG2_BYPASS << CBAR_TYPE_SHIFT;
+ arm_smmu_s2cr_cfg(smmu, idx);
+
+ /* SMR. */
+ smmu->smr[idx].mask = smmu->stream_ids_mask[idx];
+ smmu->smr[idx].id = smmu->stream_ids[idx];
+ smmu->smr[idx].valid = 1;
+ arm_smmu_smr_cfg(smmu, idx);
+
+ /* CBA2R. 64-bit Translation */
+ mmio_write_32((uintptr_t) (ARM_SMMU_GR1(smmu) +
+ ARM_SMMU_GR1_CBA2R(smmu->cfg[idx].cbndx)),
+ 0x1);
+ /* CBAR.*/
+ reg = smmu->cfg[idx].cbar;
+ reg |= (CBAR_S1_BPSHCFG_NSH << CBAR_S1_BPSHCFG_SHIFT) |
+ (CBAR_S1_MEMATTR_WB << CBAR_S1_MEMATTR_SHIFT);
+
+ mmio_write_32((uintptr_t) (ARM_SMMU_GR1(smmu) +
+ ARM_SMMU_GR1_CBAR(smmu->cfg[idx].cbndx)),
+ reg);
+
+ /* TTBCR. */
+ reg64 = (ARM_LPAE_TCR_SH_IS << ARM_LPAE_TCR_SH0_SHIFT) |
+ (ARM_LPAE_TCR_RGN_WBWA << ARM_LPAE_TCR_IRGN0_SHIFT) |
+ (ARM_LPAE_TCR_RGN_WBWA << ARM_LPAE_TCR_ORGN0_SHIFT);
+ reg64 |= ARM_LPAE_TCR_TG0_4K;
+ reg64 |= (ARM_LPAE_TCR_PS_40_BIT << ARM_LPAE_TCR_IPS_SHIFT);
+ /* ias 40 bits.*/
+ reg64 |= TTBCR_T0SZ(40) << ARM_LPAE_TCR_T0SZ_SHIFT;
+ /* Disable speculative walks through TTBR1 */
+ reg64 |= ARM_LPAE_TCR_EPD1;
+ reg = (uint32_t) reg64;
+ reg2 = (uint32_t) (reg64 >> 32);
+ reg2 |= TTBCR2_SEP_UPSTREAM;
+ reg2 |= TTBCR2_AS;
+
+ mmio_write_32((uintptr_t) (ARM_SMMU_CB_BASE(smmu) +
+ ARM_SMMU_CB(smmu, smmu->cfg[idx].cbndx) +
+ ARM_SMMU_CB_TTBCR2), reg2);
+
+ mmio_write_32((uintptr_t) (ARM_SMMU_CB_BASE(smmu) +
+ ARM_SMMU_CB(smmu, smmu->cfg[idx].cbndx) +
+ ARM_SMMU_CB_TTBCR), reg);
+
+ /* TTBR0. */
+ asid = smmu->cfg[idx].cbndx;
+ reg64 = pg_table_base;
+ reg64 |= (unsigned long long) asid << TTBRn_ASID_SHIFT;
+
+ mmio_write_64((uintptr_t) (ARM_SMMU_CB_BASE(smmu) +
+ ARM_SMMU_CB(smmu, smmu->cfg[idx].cbndx) +
+ ARM_SMMU_CB_TTBR0), reg64);
+ /* TTBR1. */
+ reg64 = 0;
+ reg64 |= (unsigned long long) asid << TTBRn_ASID_SHIFT;
+
+ mmio_write_64((uintptr_t) (ARM_SMMU_CB_BASE(smmu) +
+ ARM_SMMU_CB(smmu, smmu->cfg[idx].cbndx) +
+ ARM_SMMU_CB_TTBR1), reg64);
+ /* MAIR. */
+ reg = (ARM_LPAE_MAIR_ATTR_NC
+ << ARM_LPAE_MAIR_ATTR_SHIFT
+ (ARM_LPAE_MAIR_ATTR_IDX_NC)) |
+ (ARM_LPAE_MAIR_ATTR_WBRWA <<
+ ARM_LPAE_MAIR_ATTR_SHIFT
+ (ARM_LPAE_MAIR_ATTR_IDX_CACHE)) |
+ (ARM_LPAE_MAIR_ATTR_DEVICE <<
+ ARM_LPAE_MAIR_ATTR_SHIFT
+ (ARM_LPAE_MAIR_ATTR_IDX_DEV));
+
+ mmio_write_32((uintptr_t) (ARM_SMMU_CB_BASE(smmu) +
+ ARM_SMMU_CB(smmu, smmu->cfg[idx].cbndx) +
+ ARM_SMMU_CB_S1_MAIR0), reg);
+
+ /* MAIR1. */
+ reg = 0;
+ mmio_write_32((uintptr_t) (ARM_SMMU_CB_BASE(smmu) +
+ ARM_SMMU_CB(smmu, smmu->cfg[idx].cbndx) +
+ ARM_SMMU_CB_S1_MAIR1), reg);
+ /* SCTLR. */
+ reg = SCTLR_CFIE | SCTLR_CFRE | SCTLR_AFE | SCTLR_TRE | SCTLR_M;
+ /* stage 1.*/
+ reg |= SCTLR_S1_ASIDPNE;
+ mmio_write_32((uintptr_t) (ARM_SMMU_CB_BASE(smmu) +
+ ARM_SMMU_CB(smmu, smmu->cfg[idx].cbndx) +
+ ARM_SMMU_CB_SCTLR), reg);
+ }
+ smmu_set_pgtbl(smmu, dom, (uint64_t *)pg_table_base);
+}
diff --git a/plat/brcm/board/stingray/src/ncsi.c b/plat/brcm/board/stingray/src/ncsi.c
new file mode 100644
index 0000000..58ea9e2
--- /dev/null
+++ b/plat/brcm/board/stingray/src/ncsi.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdbool.h>
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <ncsi.h>
+#include <sr_def.h>
+#include <sr_utils.h>
+
+static const char *const io_drives[] = {
+ "2mA", "4mA", "6mA", "8mA",
+ "10mA", "12mA", "14mA", "16mA"
+};
+
+void brcm_stingray_ncsi_init(void)
+{
+ unsigned int i = 0;
+ unsigned int selx = 0;
+
+#if NCSI_IO_DRIVE_STRENGTH_MA == 2
+ selx = 0x0;
+#elif NCSI_IO_DRIVE_STRENGTH_MA == 4
+ selx = 0x1;
+#elif NCSI_IO_DRIVE_STRENGTH_MA == 6
+ selx = 0x2;
+#elif NCSI_IO_DRIVE_STRENGTH_MA == 8
+ selx = 0x3;
+#elif NCSI_IO_DRIVE_STRENGTH_MA == 10
+ selx = 0x4;
+#elif NCSI_IO_DRIVE_STRENGTH_MA == 12
+ selx = 0x5;
+#elif NCSI_IO_DRIVE_STRENGTH_MA == 14
+ selx = 0x6;
+#elif NCSI_IO_DRIVE_STRENGTH_MA == 16
+ selx = 0x7;
+#else
+ ERROR("Unsupported NCSI_IO_DRIVE_STRENGTH_MA. Please check it.\n");
+ return;
+#endif
+ INFO("ncsi io drives: %s\n", io_drives[selx]);
+
+ for (i = 0; i < NITRO_NCSI_IOPAD_CONTROL_NUM; i++) {
+ mmio_clrsetbits_32((NITRO_NCSI_IOPAD_CONTROL_BASE + (i * 4)),
+ PAD_SELX_MASK, PAD_SELX_VALUE(selx));
+ }
+
+ INFO("ncsi init done\n");
+}
diff --git a/plat/brcm/board/stingray/src/paxb.c b/plat/brcm/board/stingray/src/paxb.c
new file mode 100644
index 0000000..89f76d0
--- /dev/null
+++ b/plat/brcm/board/stingray/src/paxb.c
@@ -0,0 +1,911 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <paxb.h>
+#include <sr_def.h>
+#include <sr_utils.h>
+
+#define PCIE_CORE_PWR_ARR_POWERON 0x8
+#define PCIE_CORE_PWR_ARR_POWEROK 0x4
+#define PCIE_CORE_PWR_POWERON 0x2
+#define PCIE_CORE_PWR_POWEROK 0x1
+
+#define PCIE_CORE_USER_CFG (PCIE_CORE_BASE + 0x38)
+#define PCIE_PAXB_SMMU_SID_CFG (PCIE_CORE_BASE + 0x60)
+#ifdef SID_B8_D1_F1
+#define PAXB_SMMU_SID_CFG_BUS_WIDTH (0x8 << 8)
+#define PAXB_SMMU_SID_CFG_DEV_WIDTH (0x1 << 12)
+#define PAXB_SMMU_SID_CFG_FUN_WIDTH (0x1 << 16)
+#else
+#define PAXB_SMMU_SID_CFG_BUS_WIDTH (0x2 << 8)
+#define PAXB_SMMU_SID_CFG_DEV_WIDTH (0x5 << 12)
+#define PAXB_SMMU_SID_CFG_FUN_WIDTH (0x3 << 16)
+#endif
+
+#define PAXB_APB_TIMEOUT_COUNT_OFFSET 0x034
+
+/* allow up to 5 ms for each power switch to stabilize */
+#define PCIE_CORE_PWR_TIMEOUT_MS 5
+
+/* wait 1 microsecond for PCIe core soft reset */
+#define PCIE_CORE_SOFT_RST_DELAY_US 1
+
+/*
+ * List of PAXB APB registers
+ */
+#define PAXB_BASE 0x48000000
+#define PAXB_BASE_OFFSET 0x4000
+#define PAXB_OFFSET(core) (PAXB_BASE + \
+ (core) * PAXB_BASE_OFFSET)
+
+#define PAXB_CLK_CTRL_OFFSET 0x000
+#define PAXB_EP_PERST_SRC_SEL_MASK (1 << 2)
+#define PAXB_EP_MODE_PERST_MASK (1 << 1)
+#define PAXB_RC_PCIE_RST_OUT_MASK (1 << 0)
+
+#define PAXB_MAX_IMAP_WINDOWS 8
+#define PAXB_IMAP_REG_WIDTH 8
+#define PAXB_IMAP0_REG_WIDTH 4
+#define PAXB_AXUSER_REG_WIDTH 4
+
+#define PAXB_CFG_IND_ADDR_OFFSET 0x120
+#define PAXB_CFG_IND_DATA_OFFSET 0x124
+#define PAXB_CFG_IND_ADDR_MASK 0x1ffc
+#define PAXB_CFG_CFG_TYPE_MASK 0x1
+
+#define PAXB_EP_CFG_ADDR_OFFSET 0x1f8
+#define PAXB_EP_CFG_DATA_OFFSET 0x1fc
+#define PAXB_EP_CFG_ADDR_MASK 0xffc
+#define PAXB_EP_CFG_TYPE_MASK 0x1
+
+#define PAXB_0_DEFAULT_IMAP 0xed0
+#define DEFAULT_ADDR_INVALID BIT(0)
+#define PAXB_0_DEFAULT_IMAP_AXUSER 0xed8
+#define PAXB_0_DEFAULT_IMAP_AXCACHE 0xedc
+#define IMAP_AXCACHE 0xff
+#define OARR_VALID BIT(0)
+#define IMAP_VALID BIT(0)
+
+#define PAXB_IMAP0_BASE_OFFSET 0xc00
+#define PAXB_IARR0_BASE_OFFSET 0xd00
+#define PAXB_IMAP0_OFFSET(idx) (PAXB_IMAP0_BASE_OFFSET + \
+ (idx) * PAXB_IMAP0_REG_WIDTH)
+#define PAXB_IMAP0_WINDOW_SIZE 0x1000
+
+#define PAXB_IMAP2_OFFSET 0xcc0
+#define PAXB_IMAP0_REGS_TYPE_OFFSET 0xcd0
+#define PAXB_IARR2_LOWER_OFFSET 0xd10
+
+#define PAXB_IMAP3_BASE_OFFSET 0xe08
+#define PAXB_IMAP3_OFFSET(idx) (PAXB_IMAP3_BASE_OFFSET + \
+ (idx) * PAXB_IMAP_REG_WIDTH)
+
+#define PAXB_IMAP3_0_AXUSER_B_OFFSET 0xe48
+#define PAXB_IMAP3_0_AXUSER_OFFSET(idx) (PAXB_IMAP3_0_AXUSER_B_OFFSET + \
+ (idx) * PAXB_AXUSER_REG_WIDTH)
+
+#define PAXB_IMAP4_BASE_OFFSET 0xe70
+#define PAXB_IMAP4_OFFSET(idx) (PAXB_IMAP4_BASE_OFFSET + \
+ (idx) * PAXB_IMAP_REG_WIDTH)
+
+#define PAXB_IMAP4_0_AXUSER_B_OFFSET 0xeb0
+#define PAXB_IMAP4_0_AXUSER_OFFSET(idx) (PAXB_IMAP4_0_AXUSER_B_OFFSET + \
+ (idx) * PAXB_AXUSER_REG_WIDTH)
+
+#define PAXB_CFG_LINK_STATUS_OFFSET 0xf0c
+#define PAXB_CFG_PHYLINKUP_MASK (1 << 3)
+#define PAXB_CFG_DL_ACTIVE_MASK (1 << 2)
+
+#define PAXB_IMAP0_0_AXUSER_OFFSET 0xf60
+#define PAXB_IMAP2_AXUSER_OFFSET 0xfe0
+
+/* cacheable write-back, allocate on both reads and writes */
+#define IMAP_ARCACHE 0x0f0
+#define IMAP_AWCACHE 0xf00
+/* normal access, nonsecure access, and data access */
+/* AWQOS:0xe and ARQOS:0xa */
+/* AWPROT:0x2 and ARPROT:0x1 */
+#define IMAP_AXUSER 0x002e002a
+
+/*
+ * List of NIC security and PIPEMUX related registers
+ */
+#define SR_PCIE_NIC_SECURITY_BASE 0x58100000
+#define NS3Z_PCIE_NIC_SECURITY_BASE 0x48100000
+
+#define GITS_TRANSLATER 0x63c30000
+
+#define VENDOR_ID 0x14e4
+#define CFG_RC_DEV_ID 0x434
+#define CFG_RC_DEV_SUBID 0x438
+#define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c
+#define PCI_CLASS_BRIDGE_MASK 0xffff00
+#define PCI_CLASS_BRIDGE_SHIFT 8
+#define PCI_CLASS_BRIDGE_PCI 0x0604
+
+/*
+ * List of PAXB RC configuration space registers
+ */
+
+/* first capability list entry */
+#define PCI_CAPABILITY_LIST_OFFSET 0x34
+#define PCI_CAPABILITY_SPEED_OFFSET 0xc
+#define PCI_EP_CAPABILITY_OFFSET 0x10
+
+#define CFG_RC_LINK_STATUS_CTRL_2 0x0dc
+#define CFG_RC_LINK_SPEED_SHIFT 0
+#define CFG_RC_LINK_SPEED_MASK (0xf << CFG_RC_LINK_SPEED_SHIFT)
+
+#define CFG_RC_DEVICE_CAP 0x4d4
+#define CFG_RC_DEVICE_CAP_MPS_SHIFT 0
+#define CFG_RC_DEVICE_CAP_MPS_MASK (0x7 << CFG_RC_DEVICE_CAP_MPS_SHIFT)
+/* MPS 256 bytes */
+#define CFG_RC_DEVICE_CAP_MPS_256B (0x1 << CFG_RC_DEVICE_CAP_MPS_SHIFT)
+/* MPS 512 bytes */
+#define CFG_RC_DEVICE_CAP_MPS_512B (0x2 << CFG_RC_DEVICE_CAP_MPS_SHIFT)
+
+#define CFG_RC_TL_FCIMM_NP_LIMIT 0xa10
+#define CFG_RC_TL_FCIMM_NP_VAL 0x01500000
+#define CFG_RC_TL_FCIMM_P_LIMIT 0xa14
+#define CFG_RC_TL_FCIMM_P_VAL 0x03408080
+
+#define CFG_RC_LINK_CAP 0x4dc
+#define CFG_RC_LINK_CAP_SPEED_SHIFT 0
+#define CFG_RC_LINK_CAP_SPEED_MASK (0xf << CFG_RC_LINK_CAP_SPEED_SHIFT)
+#define CFG_RC_LINK_CAP_WIDTH_SHIFT 4
+#define CFG_RC_LINK_CAP_WIDTH_MASK (0x1f << CFG_RC_LINK_CAP_WIDTH_SHIFT)
+
+#define CFG_LINK_CAP_RC 0x4f0
+#define CFG_RC_DL_ACTIVE_SHIFT 0
+#define CFG_RC_DL_ACTIVE_MASK (0x1 << CFG_RC_DL_ACTIVE_SHIFT)
+#define CFG_RC_SLOT_CLK_SHIFT 1
+#define CFG_RC_SLOT_CLK_MASK (0x1 << CFG_RC_SLOT_CLK_SHIFT)
+
+#define CFG_ROOT_CAP_RC 0x4f8
+#define CFG_ROOT_CAP_LTR_SHIFT 1
+#define CFG_ROOT_CAP_LTR_MASK (0x1 << CFG_ROOT_CAP_LTR_SHIFT)
+
+#define CFG_RC_CLKREQ_ENABLED 0x4fc
+#define CFG_RC_CLKREQ_ENABLED_SHIFT 0
+#define CFG_RC_CLKREQ_ENABLED_MASK (0x1 << CFG_RC_CLKREQ_ENABLED_SHIFT)
+
+#define CFG_RC_COEFF_ADDR 0x638
+
+#define CFG_RC_TL_CTRL_0 0x800
+#define RC_MEM_DW_CHK_MASK 0x03fe
+
+#define CFG_RC_PDL_CTRL_4 0x1010
+#define NPH_FC_INIT_SHIFT 24
+#define NPH_FC_INIT_MASK (U(0xff) << NPH_FC_INIT_SHIFT)
+#define PD_FC_INIT_SHIFT 12
+#define PD_FC_INIT_MASK (0xffff << PD_FC_INIT_SHIFT)
+
+#define CFG_RC_PDL_CTRL_5 0x1014
+#define PH_INIT_SHIFT 0
+#define PH_INIT_MASK (0xff << PH_INIT_SHIFT)
+
+#define DL_STATUS_OFFSET 0x1048
+#define PHYLINKUP BIT(13)
+
+#define PH_INIT 0x10
+#define PD_FC_INIT 0x100
+#define NPH_FC_INIT 0x8
+
+#define SRP_PH_INIT 0x7F
+#define SRP_PD_FC_INIT 0x200
+#define SRP_NPH_FC_INIT 0x7F
+
+#define CFG_ADDR_BUS_NUM_SHIFT 20
+#define CFG_ADDR_DEV_NUM_SHIFT 15
+#define CFG_ADDR_FUNC_NUM_SHIFT 12
+#define CFG_ADDR_REG_NUM_SHIFT 2
+#define CFG_ADDR_REG_NUM_MASK 0x00000ffc
+#define CFG_ADDR_CFG_TYPE_MASK 0x00000003
+
+#define DL_LINK_UP_TIMEOUT_MS 1000
+
+#define CFG_RETRY_STATUS 0xffff0001
+#define CRS_TIMEOUT_MS 5000
+
+/* create EP config data to write */
+#define DEF_BUS_NO 1 /* default bus 1 */
+#define DEF_SLOT_NO 0 /* default slot 0 */
+#define DEF_FN_NO 0 /* default fn 0 */
+
+#define EP_CONFIG_VAL(bus_no, slot, fn, where) \
+ (((bus_no) << CFG_ADDR_BUS_NUM_SHIFT) | \
+ ((slot) << CFG_ADDR_DEV_NUM_SHIFT) | \
+ ((fn) << CFG_ADDR_FUNC_NUM_SHIFT) | \
+ ((where) & CFG_ADDR_REG_NUM_MASK) | \
+ (1 & CFG_ADDR_CFG_TYPE_MASK))
+
+/* PAXB security offset */
+#define PAXB_SECURITY_IDM_OFFSET 0x1c
+#define PAXB_SECURITY_APB_OFFSET 0x24
+#define PAXB_SECURITY_ECAM_OFFSET 0x3c
+
+#define paxb_get_config(type) paxb_get_##type##_config()
+
+static unsigned int paxb_sec_reg_offset[] = {
+ 0x0c, /* PAXB0 AXI */
+ 0x10, /* PAXB1 AXI */
+ 0x14, /* PAXB2 AXI */
+ 0x18, /* PAXB3 AXI */
+ 0x20, /* PAXB4 AXI */
+ 0x28, /* PAXB5 AXI */
+ 0x2c, /* PAXB6 AXI */
+ 0x30, /* PAXB7 AXI */
+ 0x24, /* PAXB APB */
+};
+
+const paxb_cfg *paxb;
+
+/*
+ * Given a PIPEMUX strap and PCIe core index, this function returns 1 if a
+ * PCIe core needs to be enabled
+ */
+int pcie_core_needs_enable(unsigned int core_idx)
+{
+ if (paxb->core_needs_enable)
+ return paxb->core_needs_enable(core_idx);
+
+ return 0;
+}
+
+static void pcie_set_default_tx_coeff(uint32_t core_idx, uint32_t link_width)
+{
+ unsigned int lanes = 0;
+ uint32_t data, addr;
+
+ addr = CFG_RC_COEFF_ADDR;
+ for (lanes = 0; lanes < link_width; lanes = lanes + 2) {
+ data = paxb_rc_cfg_read(core_idx, addr);
+ data &= 0xf0f0f0f0;
+ data |= (7 & 0xf);
+ data |= (7 & 0xf) << 8;
+ data |= (7 & 0xf) << 16;
+ data |= (7 & 0xf) << 24;
+
+ paxb_rc_cfg_write(core_idx, addr, data);
+ addr += 4;
+ }
+}
+
+static int paxb_rc_link_init(void)
+{
+ uint32_t val, link_speed;
+ unsigned int link_width;
+ uint32_t core_idx;
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ link_width = paxb->get_link_width(core_idx);
+ if (!link_width) {
+ ERROR("Unsupported PIPEMUX\n");
+ return -EOPNOTSUPP;
+ }
+
+ link_speed = paxb->get_link_speed();
+ /* program RC's link cap reg to advertise proper link width */
+ val = paxb_rc_cfg_read(core_idx, CFG_RC_LINK_CAP);
+ val &= ~CFG_RC_LINK_CAP_WIDTH_MASK;
+ val |= (link_width << CFG_RC_LINK_CAP_WIDTH_SHIFT);
+ paxb_rc_cfg_write(core_idx, CFG_RC_LINK_CAP, val);
+
+ /* program RC's link cap reg to advertise proper link speed */
+ val = paxb_rc_cfg_read(core_idx, CFG_RC_LINK_CAP);
+ val &= ~CFG_RC_LINK_CAP_SPEED_MASK;
+ val |= link_speed << CFG_RC_LINK_CAP_SPEED_SHIFT;
+ paxb_rc_cfg_write(core_idx, CFG_RC_LINK_CAP, val);
+
+ /* also need to program RC's link status control register */
+ val = paxb_rc_cfg_read(core_idx, CFG_RC_LINK_STATUS_CTRL_2);
+ val &= ~(CFG_RC_LINK_SPEED_MASK);
+ val |= link_speed << CFG_RC_LINK_SPEED_SHIFT;
+ paxb_rc_cfg_write(core_idx, CFG_RC_LINK_STATUS_CTRL_2, val);
+
+#ifdef WAR_PLX_PRESET_PARITY_FAIL
+ /* WAR to avoid crash with PLX switch in GEN3*/
+ /* While PRESET, PLX switch is not fixing parity so disabled */
+ val = paxb_rc_cfg_read(core_idx, CFG_RC_REG_PHY_CTL_10);
+ val &= ~(PHY_CTL_10_GEN3_MATCH_PARITY);
+ paxb_rc_cfg_write(core_idx, CFG_RC_REG_PHY_CTL_10, val);
+#endif
+ pcie_set_default_tx_coeff(core_idx, link_width);
+ }
+ return 0;
+}
+
+#ifdef PAXB_LINKUP
+static void paxb_perst_ctrl(unsigned int core_idx, bool assert)
+{
+ uint32_t clk_ctrl = PAXB_OFFSET(core_idx) + PAXB_CLK_CTRL_OFFSET;
+
+ if (assert) {
+ mmio_clrbits_32(clk_ctrl, PAXB_EP_PERST_SRC_SEL_MASK |
+ PAXB_EP_MODE_PERST_MASK |
+ PAXB_RC_PCIE_RST_OUT_MASK);
+ udelay(250);
+ } else {
+ mmio_setbits_32(clk_ctrl, PAXB_RC_PCIE_RST_OUT_MASK);
+ mdelay(100);
+ }
+}
+
+static void paxb_start_link_up(void)
+{
+ unsigned int core_idx;
+ uint32_t val, timeout;
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ /* toggle PERST */
+ paxb_perst_ctrl(core_idx, true);
+ paxb_perst_ctrl(core_idx, false);
+
+ timeout = DL_LINK_UP_TIMEOUT_MS;
+ /* wait for Link up */
+ do {
+ val = mmio_read_32(PAXB_OFFSET(core_idx) +
+ PAXB_CFG_LINK_STATUS_OFFSET);
+ if (val & PAXB_CFG_DL_ACTIVE_MASK)
+ break;
+
+ mdelay(1);
+ } while (--timeout);
+
+ if (!timeout)
+ ERROR("PAXB core %u link is down\n", core_idx);
+ }
+}
+#endif
+
+static void pcie_core_soft_reset(unsigned int core_idx)
+{
+ uint32_t offset = core_idx * PCIE_CORE_PWR_OFFSET;
+ uintptr_t ctrl = (uintptr_t)(PCIE_CORE_SOFT_RST_CFG_BASE + offset);
+
+ /* Put PCIe core in soft reset */
+ mmio_clrbits_32(ctrl, PCIE_CORE_SOFT_RST);
+
+ /* Wait for 1 us before pulling PCIe core out of soft reset */
+ udelay(PCIE_CORE_SOFT_RST_DELAY_US);
+
+ mmio_setbits_32(ctrl, PCIE_CORE_SOFT_RST);
+}
+
+static int pcie_core_pwron_switch(uintptr_t ctrl, uintptr_t status,
+ uint32_t mask)
+{
+ uint32_t val;
+ unsigned int timeout = PCIE_CORE_PWR_TIMEOUT_MS;
+
+ /* enable switch */
+ mmio_setbits_32(ctrl, mask);
+
+ /* now wait for it to stabilize */
+ do {
+ val = mmio_read_32(status);
+ if ((val & mask) == mask)
+ return 0;
+ mdelay(1);
+ } while (--timeout);
+
+ return -EIO;
+}
+
+static int pcie_core_pwr_seq(uintptr_t ctrl, uintptr_t status)
+{
+ int ret;
+
+ /*
+ * Enable the switch with the following sequence:
+ * 1. Array weak switch output switch
+ * 2. Array strong switch
+ * 3. Weak switch output acknowledge
+ * 4. Strong switch output acknowledge
+ */
+ ret = pcie_core_pwron_switch(ctrl, status, PCIE_CORE_PWR_ARR_POWERON);
+ if (ret)
+ return ret;
+
+ ret = pcie_core_pwron_switch(ctrl, status, PCIE_CORE_PWR_ARR_POWEROK);
+ if (ret)
+ return ret;
+
+ ret = pcie_core_pwron_switch(ctrl, status, PCIE_CORE_PWR_POWERON);
+ if (ret)
+ return ret;
+
+ ret = pcie_core_pwron_switch(ctrl, status, PCIE_CORE_PWR_POWEROK);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/*
+ * This function enables PCIe core and PAXB memory buffer power, and then
+ * remove the PCIe core from isolation
+ */
+static int pcie_core_pwr_init(unsigned int core_idx)
+{
+ int ret;
+ uint32_t offset = core_idx * PCIE_CORE_PWR_OFFSET;
+ uintptr_t ctrl, status;
+
+ /* enable mem power to PCIe core */
+ ctrl = (uintptr_t)(PCIE_CORE_MEM_PWR_BASE + offset);
+ status = (uintptr_t)(PCIE_CORE_MEM_PWR_STATUS_BASE + offset);
+ ret = pcie_core_pwr_seq(ctrl, status);
+ if (ret) {
+ ERROR("PCIe core mem power failed\n");
+ return ret;
+ }
+
+ /* now enable mem power to PAXB wrapper */
+ ctrl = (uintptr_t)(PCIE_PAXB_MEM_PWR_BASE + offset);
+ status = (uintptr_t)(PCIE_PAXB_MEM_PWR_STATUS_BASE + offset);
+ ret = pcie_core_pwr_seq(ctrl, status);
+ if (ret) {
+ ERROR("PAXB mem power failed\n");
+ return ret;
+ }
+
+ /* now remove power isolation */
+ ctrl = (uintptr_t)(PCIE_CORE_ISO_CFG_BASE + offset);
+ mmio_clrbits_32(ctrl, PCIE_CORE_ISO | PCIE_CORE_MEM_ISO);
+
+ return 0;
+}
+
+static void pcie_ss_reset(void)
+{
+ mmio_setbits_32(CDRU_MISC_RESET_CONTROL,
+ 1 << CDRU_MISC_RESET_CONTROL__CDRU_PCIE_RESET_N_R);
+}
+
+/*
+ * This function reads the PIPEMUX strap, figures out all the PCIe cores that
+ * need to be enabled and enable the mem power for those cores
+ */
+static int pcie_cores_init(void)
+{
+ int ret = 0;
+ uint32_t core_idx;
+
+ if (paxb->pipemux_init) {
+ ret = paxb->pipemux_init();
+ if (ret)
+ return ret;
+ }
+
+ /* bring PCIe subsystem out of reset */
+ pcie_ss_reset();
+
+ /* power up all PCIe cores that will be used as RC */
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ ret = pcie_core_pwr_init(core_idx);
+ if (ret) {
+ ERROR("PCIe core %u power up failed\n", core_idx);
+ return ret;
+ }
+
+ pcie_core_soft_reset(core_idx);
+
+ VERBOSE("PCIe core %u is powered up\n", core_idx);
+ }
+
+ return ret;
+}
+
+void paxb_rc_cfg_write(unsigned int core_idx, unsigned int where,
+ uint32_t val)
+{
+ mmio_write_32(PAXB_OFFSET(core_idx) + PAXB_CFG_IND_ADDR_OFFSET,
+ (where & PAXB_CFG_IND_ADDR_MASK) |
+ PAXB_CFG_CFG_TYPE_MASK);
+ mmio_write_32(PAXB_OFFSET(core_idx) + PAXB_CFG_IND_DATA_OFFSET, val);
+}
+
+unsigned int paxb_rc_cfg_read(unsigned int core_idx, unsigned int where)
+{
+ unsigned int val;
+
+ mmio_write_32(PAXB_OFFSET(core_idx) + PAXB_CFG_IND_ADDR_OFFSET,
+ (where & PAXB_CFG_IND_ADDR_MASK) |
+ PAXB_CFG_CFG_TYPE_MASK);
+ val = mmio_read_32(PAXB_OFFSET(core_idx) + PAXB_CFG_IND_DATA_OFFSET);
+
+ return val;
+}
+
+static void paxb_cfg_mps(void)
+{
+ uint32_t val, core_idx, mps;
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ val = paxb_rc_cfg_read(core_idx, CFG_RC_DEVICE_CAP);
+ val &= ~CFG_RC_DEVICE_CAP_MPS_MASK;
+ mps = CFG_RC_DEVICE_CAP_MPS_256B;
+ if (core_idx == 0 || core_idx == 1 ||
+ core_idx == 6 || core_idx == 7) {
+ mps = CFG_RC_DEVICE_CAP_MPS_512B;
+ }
+ val |= mps;
+ paxb_rc_cfg_write(core_idx, CFG_RC_DEVICE_CAP, val);
+ }
+}
+
+static void paxb_cfg_dev_id(void)
+{
+ uint32_t val, core_idx;
+ uint32_t device_id;
+
+ device_id = paxb->device_id;
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ /* Set Core in RC mode */
+ mmio_setbits_32(PCIE_CORE_USER_CFG +
+ (core_idx * PCIE_CORE_PWR_OFFSET), 1);
+
+ /* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */
+ val = paxb_rc_cfg_read(core_idx, PCI_BRIDGE_CTRL_REG_OFFSET);
+ val &= ~PCI_CLASS_BRIDGE_MASK;
+ val |= (PCI_CLASS_BRIDGE_PCI << PCI_CLASS_BRIDGE_SHIFT);
+ paxb_rc_cfg_write(core_idx, PCI_BRIDGE_CTRL_REG_OFFSET, val);
+
+ val = (VENDOR_ID << 16) | device_id;
+ paxb_rc_cfg_write(core_idx, CFG_RC_DEV_ID, val);
+
+ val = (device_id << 16) | VENDOR_ID;
+ paxb_rc_cfg_write(core_idx, CFG_RC_DEV_SUBID, val);
+ }
+}
+
+static void paxb_cfg_tgt_trn(void)
+{
+ uint32_t val, core_idx;
+
+ /*
+ * Disable all mem Rd/Wr size check so it allows target read/write
+ * transactions to be more than stipulated DW. As a result, PAXB root
+ * complex will not abort these read/write transcations beyond
+ * stipulated limit
+ */
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ val = paxb_rc_cfg_read(core_idx, CFG_RC_TL_CTRL_0);
+ val &= ~(RC_MEM_DW_CHK_MASK);
+ paxb_rc_cfg_write(core_idx, CFG_RC_TL_CTRL_0, val);
+ }
+}
+
+static void paxb_cfg_pdl_ctrl(void)
+{
+ uint32_t val, core_idx;
+ uint32_t nph, ph, pd;
+
+ /* increase the credit counter to 4 for non-posted header */
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ nph = NPH_FC_INIT;
+ ph = PH_INIT;
+ pd = PD_FC_INIT;
+
+ if (core_idx == 0 || core_idx == 1 ||
+ core_idx == 6 || core_idx == 7) {
+ nph = SRP_NPH_FC_INIT;
+ ph = SRP_PH_INIT;
+ pd = SRP_PD_FC_INIT;
+ }
+ val = paxb_rc_cfg_read(core_idx, CFG_RC_PDL_CTRL_4);
+ val &= ~NPH_FC_INIT_MASK;
+ val &= ~PD_FC_INIT_MASK;
+ val = val | (nph << NPH_FC_INIT_SHIFT);
+ val = val | (pd << PD_FC_INIT_SHIFT);
+ paxb_rc_cfg_write(core_idx, CFG_RC_PDL_CTRL_4, val);
+
+ val = paxb_rc_cfg_read(core_idx, CFG_RC_PDL_CTRL_5);
+ val &= ~PH_INIT_MASK;
+ val = val | (ph << PH_INIT_SHIFT);
+ paxb_rc_cfg_write(core_idx, CFG_RC_PDL_CTRL_5, val);
+
+ /*
+ * ASIC to give more optmized value after further investigation.
+ * till then this is important to have to get similar
+ * performance on all the slots.
+ */
+ paxb_rc_cfg_write(core_idx, CFG_RC_TL_FCIMM_NP_LIMIT,
+ CFG_RC_TL_FCIMM_NP_VAL);
+
+ paxb_rc_cfg_write(core_idx, CFG_RC_TL_FCIMM_P_LIMIT,
+ CFG_RC_TL_FCIMM_P_VAL);
+ }
+}
+
+static void paxb_cfg_clkreq(void)
+{
+ uint32_t val, core_idx;
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ val = paxb_rc_cfg_read(core_idx, CFG_RC_CLKREQ_ENABLED);
+ val &= ~CFG_RC_CLKREQ_ENABLED_MASK;
+ paxb_rc_cfg_write(core_idx, CFG_RC_CLKREQ_ENABLED, val);
+ }
+}
+
+static void paxb_cfg_dl_active(bool enable)
+{
+ uint32_t val, core_idx;
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ val = paxb_rc_cfg_read(core_idx, CFG_LINK_CAP_RC);
+ if (enable)
+ val |= CFG_RC_DL_ACTIVE_MASK;
+ else
+ val &= ~CFG_RC_DL_ACTIVE_MASK;
+ paxb_rc_cfg_write(core_idx, CFG_LINK_CAP_RC, val);
+ }
+}
+
+static void paxb_cfg_LTR(int enable)
+{
+ uint32_t val, core_idx;
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ val = paxb_rc_cfg_read(core_idx, CFG_ROOT_CAP_RC);
+ if (enable)
+ val |= CFG_ROOT_CAP_LTR_MASK;
+ else
+ val &= ~CFG_ROOT_CAP_LTR_MASK;
+ paxb_rc_cfg_write(core_idx, CFG_ROOT_CAP_RC, val);
+ }
+}
+
+static void paxb_ib_regs_bypass(void)
+{
+ unsigned int i, j;
+
+ for (i = 0; i < paxb->num_cores; i++) {
+ if (!pcie_core_needs_enable(i))
+ continue;
+
+ /* Configure Default IMAP window */
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_0_DEFAULT_IMAP,
+ DEFAULT_ADDR_INVALID);
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_0_DEFAULT_IMAP_AXUSER,
+ IMAP_AXUSER);
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_0_DEFAULT_IMAP_AXCACHE,
+ IMAP_AXCACHE);
+
+ /* Configure MSI IMAP window */
+ mmio_setbits_32(PAXB_OFFSET(i) +
+ PAXB_IMAP0_REGS_TYPE_OFFSET,
+ 0x1);
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_IARR0_BASE_OFFSET,
+ GITS_TRANSLATER | OARR_VALID);
+ for (j = 0; j < PAXB_MAX_IMAP_WINDOWS; j++) {
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_IMAP0_OFFSET(j),
+ (GITS_TRANSLATER +
+ (j * PAXB_IMAP0_WINDOW_SIZE)) |
+ IMAP_VALID);
+ }
+ }
+}
+
+static void paxb_ib_regs_init(void)
+{
+ unsigned int core_idx;
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ /* initialize IARR2 to zero */
+ mmio_write_32(PAXB_OFFSET(core_idx) + PAXB_IARR2_LOWER_OFFSET,
+ 0x0);
+ mmio_setbits_32(PAXB_OFFSET(core_idx) +
+ PAXB_IMAP0_REGS_TYPE_OFFSET,
+ 0x1);
+ }
+}
+
+static void paxb_cfg_apb_timeout(void)
+{
+ unsigned int core_idx;
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ /* allow unlimited timeout */
+ mmio_write_32(PAXB_OFFSET(core_idx) +
+ PAXB_APB_TIMEOUT_COUNT_OFFSET,
+ 0xFFFFFFFF);
+ }
+}
+
+static void paxb_smmu_cfg(void)
+{
+ unsigned int core_idx;
+ uint32_t offset;
+ uint32_t val;
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+
+ offset = core_idx * PCIE_CORE_PWR_OFFSET;
+ val = mmio_read_32(PCIE_PAXB_SMMU_SID_CFG + offset);
+ val &= ~(0xFFF00);
+ val |= (PAXB_SMMU_SID_CFG_FUN_WIDTH |
+ PAXB_SMMU_SID_CFG_DEV_WIDTH |
+ PAXB_SMMU_SID_CFG_BUS_WIDTH);
+ mmio_write_32(PCIE_PAXB_SMMU_SID_CFG + offset, val);
+ val = mmio_read_32(PCIE_PAXB_SMMU_SID_CFG + offset);
+ VERBOSE("smmu cfg reg 0x%x\n", val);
+ }
+}
+
+static void paxb_cfg_coherency(void)
+{
+ unsigned int i, j;
+
+ for (i = 0; i < paxb->num_cores; i++) {
+ if (!pcie_core_needs_enable(i))
+ continue;
+
+#ifdef USE_DDR
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_IMAP2_OFFSET,
+ IMAP_ARCACHE | IMAP_AWCACHE);
+#endif
+
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_IMAP0_0_AXUSER_OFFSET,
+ IMAP_AXUSER);
+
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_IMAP2_AXUSER_OFFSET,
+ IMAP_AXUSER);
+
+ for (j = 0; j < PAXB_MAX_IMAP_WINDOWS; j++) {
+#ifdef USE_DDR
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_IMAP3_OFFSET(j),
+ IMAP_ARCACHE | IMAP_AWCACHE);
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_IMAP4_OFFSET(j),
+ IMAP_ARCACHE | IMAP_AWCACHE);
+#endif
+ /* zero out IMAP0 mapping windows for MSI/MSI-X */
+ mmio_write_32(PAXB_OFFSET(i) + PAXB_IMAP0_OFFSET(j),
+ 0x0);
+
+ mmio_write_32(PAXB_OFFSET(i) +
+ PAXB_IMAP3_0_AXUSER_OFFSET(j),
+ IMAP_AXUSER);
+ mmio_write_32(PAXB_OFFSET(i) +
+ PAXB_IMAP4_0_AXUSER_OFFSET(j),
+ IMAP_AXUSER);
+ }
+ }
+}
+
+/*
+ * This function configures all PAXB related blocks to allow non-secure access
+ */
+void paxb_ns_init(enum paxb_type type)
+{
+ unsigned int reg;
+
+ switch (type) {
+ case PAXB_SR:
+ for (reg = 0; reg < ARRAY_SIZE(paxb_sec_reg_offset); reg++) {
+
+ mmio_setbits_32(SR_PCIE_NIC_SECURITY_BASE +
+ paxb_sec_reg_offset[reg], 0x1);
+ }
+ /* Enabled all PAXB's relevant IDM blocks access in non-secure mode */
+ mmio_setbits_32(SR_PCIE_NIC_SECURITY_BASE + PAXB_SECURITY_IDM_OFFSET,
+ 0xffff);
+ break;
+ case PAXB_NS3Z:
+ mmio_setbits_32(NS3Z_PCIE_NIC_SECURITY_BASE +
+ paxb_sec_reg_offset[0], 0x1);
+ mmio_setbits_32(NS3Z_PCIE_NIC_SECURITY_BASE +
+ PAXB_SECURITY_IDM_OFFSET, 0xffff);
+ mmio_setbits_32(NS3Z_PCIE_NIC_SECURITY_BASE +
+ PAXB_SECURITY_APB_OFFSET, 0x7);
+ mmio_setbits_32(NS3Z_PCIE_NIC_SECURITY_BASE +
+ PAXB_SECURITY_ECAM_OFFSET, 0x1);
+ break;
+ }
+}
+
+static int paxb_set_config(void)
+{
+ paxb = paxb_get_config(sr);
+ if (paxb)
+ return 0;
+
+ return -ENODEV;
+}
+
+void paxb_init(void)
+{
+ int ret;
+
+ ret = paxb_set_config();
+ if (ret)
+ return;
+
+ paxb_ns_init(paxb->type);
+
+ ret = pcie_cores_init();
+ if (ret)
+ return;
+
+ if (paxb->phy_init) {
+ ret = paxb->phy_init();
+ if (ret)
+ return;
+ }
+
+ paxb_cfg_dev_id();
+ paxb_cfg_tgt_trn();
+ paxb_cfg_pdl_ctrl();
+ if (paxb->type == PAXB_SR) {
+ paxb_ib_regs_init();
+ paxb_cfg_coherency();
+ } else
+ paxb_ib_regs_bypass();
+
+ paxb_cfg_apb_timeout();
+ paxb_smmu_cfg();
+ paxb_cfg_clkreq();
+ paxb_rc_link_init();
+
+ /* Stingray Doesn't support LTR */
+ paxb_cfg_LTR(false);
+ paxb_cfg_dl_active(true);
+
+ paxb_cfg_mps();
+
+#ifdef PAXB_LINKUP
+ paxb_start_link_up();
+#endif
+ INFO("PAXB init done\n");
+}
diff --git a/plat/brcm/board/stingray/src/paxc.c b/plat/brcm/board/stingray/src/paxc.c
new file mode 100644
index 0000000..44af4b0
--- /dev/null
+++ b/plat/brcm/board/stingray/src/paxc.c
@@ -0,0 +1,267 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <iommu.h>
+#include <platform_def.h>
+#include <sr_utils.h>
+
+#define PAXC_BASE 0x60400000
+#define PAXC_AXI_CFG_PF 0x10
+#define PAXC_AXI_CFG_PF_OFFSET(pf) (PAXC_AXI_CFG_PF + (pf) * 4)
+#define PAXC_ARPROT_PF_CFG 0x40
+#define PAXC_AWPROT_PF_CFG 0x44
+
+#define PAXC_ARQOS_PF_CFG 0x48
+#define PAXC_ARQOS_VAL 0xaaaaaaaa
+
+#define PAXC_AWQOS_PF_CFG 0x4c
+#define PAXC_AWQOS_VAL 0xeeeeeeee
+
+#define PAXC_CFG_IND_ADDR_OFFSET 0x1f0
+#define PAXC_CFG_IND_ADDR_MASK 0xffc
+#define PAXC_CFG_IND_DATA_OFFSET 0x1f4
+
+/* offsets for PAXC root complex configuration space registers */
+
+#define PAXC_CFG_ID_OFFSET 0x434
+#define PAXC_RC_VENDOR_ID 0x14e4
+#define PAXC_RC_VENDOR_ID_SHIFT 16
+
+#define PAXC_RC_DEVICE_ID 0xd750
+
+#define PAXC_CFG_LINK_CAP_OFFSET 0x4dc
+#define PAXC_RC_LINK_CAP_SPD_SHIFT 0
+#define PAXC_RC_LINK_CAP_SPD_MASK (0xf << PAXC_RC_LINK_CAP_SPD_SHIFT)
+#define PAXC_RC_LINK_CAP_SPD 3
+#define PAXC_RC_LINK_CAP_WIDTH_SHIFT 4
+#define PAXC_RC_LINK_CAP_WIDTH_MASK (0x1f << PAXC_RC_LINK_CAP_WIDTH_SHIFT)
+#define PAXC_RC_LINK_CAP_WIDTH 16
+
+/* offsets for MHB registers */
+
+#define MHB_BASE 0x60401000
+#define MHB_MEM_PWR_STATUS_PAXC (MHB_BASE + 0x1c0)
+#define MHB_PWR_ARR_POWERON 0x8
+#define MHB_PWR_ARR_POWEROK 0x4
+#define MHB_PWR_POWERON 0x2
+#define MHB_PWR_POWEROK 0x1
+#define MHB_PWR_STATUS_MASK (MHB_PWR_ARR_POWERON | \
+ MHB_PWR_ARR_POWEROK | \
+ MHB_PWR_POWERON | \
+ MHB_PWR_POWEROK)
+
+/* max number of PFs from Nitro that PAXC sees */
+#define MAX_NR_NITRO_PF 8
+
+#ifdef EMULATION_SETUP
+static void paxc_reg_dump(void)
+{
+}
+#else
+/* total number of PAXC registers */
+#define NR_PAXC_REGS 53
+static void paxc_reg_dump(void)
+{
+ uint32_t idx, offset = 0;
+
+ VERBOSE("PAXC register dump start\n");
+ for (idx = 0; idx < NR_PAXC_REGS; idx++, offset += 4)
+ VERBOSE("offset: 0x%x val: 0x%x\n", offset,
+ mmio_read_32(PAXC_BASE + offset));
+ VERBOSE("PAXC register dump end\n");
+}
+#endif /* EMULATION_SETUP */
+
+#ifdef EMULATION_SETUP
+static void mhb_reg_dump(void)
+{
+}
+#else
+#define NR_MHB_REGS 227
+static void mhb_reg_dump(void)
+{
+ uint32_t idx, offset = 0;
+
+ VERBOSE("MHB register dump start\n");
+ for (idx = 0; idx < NR_MHB_REGS; idx++, offset += 4)
+ VERBOSE("offset: 0x%x val: 0x%x\n", offset,
+ mmio_read_32(MHB_BASE + offset));
+ VERBOSE("MHB register dump end\n");
+}
+#endif /* EMULATION_SETUP */
+
+static void paxc_rc_cfg_write(uint32_t where, uint32_t val)
+{
+ mmio_write_32(PAXC_BASE + PAXC_CFG_IND_ADDR_OFFSET,
+ where & PAXC_CFG_IND_ADDR_MASK);
+ mmio_write_32(PAXC_BASE + PAXC_CFG_IND_DATA_OFFSET, val);
+}
+
+static uint32_t paxc_rc_cfg_read(uint32_t where)
+{
+ mmio_write_32(PAXC_BASE + PAXC_CFG_IND_ADDR_OFFSET,
+ where & PAXC_CFG_IND_ADDR_MASK);
+ return mmio_read_32(PAXC_BASE + PAXC_CFG_IND_DATA_OFFSET);
+}
+
+/*
+ * Function to program PAXC root complex link capability register
+ */
+static void paxc_cfg_link_cap(void)
+{
+ uint32_t val;
+
+ val = paxc_rc_cfg_read(PAXC_CFG_LINK_CAP_OFFSET);
+ val &= ~(PAXC_RC_LINK_CAP_SPD_MASK | PAXC_RC_LINK_CAP_WIDTH_MASK);
+ val |= (PAXC_RC_LINK_CAP_SPD << PAXC_RC_LINK_CAP_SPD_SHIFT) |
+ (PAXC_RC_LINK_CAP_WIDTH << PAXC_RC_LINK_CAP_WIDTH_SHIFT);
+ paxc_rc_cfg_write(PAXC_CFG_LINK_CAP_OFFSET, val);
+}
+
+/*
+ * Function to program PAXC root complex vendor ID and device ID
+ */
+static void paxc_cfg_id(void)
+{
+ uint32_t val;
+
+ val = (PAXC_RC_VENDOR_ID << PAXC_RC_VENDOR_ID_SHIFT) |
+ PAXC_RC_DEVICE_ID;
+ paxc_rc_cfg_write(PAXC_CFG_ID_OFFSET, val);
+}
+
+void paxc_init(void)
+{
+ unsigned int pf_index;
+ unsigned int val;
+
+ val = mmio_read_32(MHB_MEM_PWR_STATUS_PAXC);
+ if ((val & MHB_PWR_STATUS_MASK) != MHB_PWR_STATUS_MASK) {
+ INFO("PAXC not powered\n");
+ return;
+ }
+
+ paxc_cfg_id();
+ paxc_cfg_link_cap();
+
+ paxc_reg_dump();
+ mhb_reg_dump();
+
+#ifdef USE_DDR
+ /*
+ * Set AWCACHE and ARCACHE to 0xff (Cacheable write-back,
+ * allocate on both reads and writes) per
+ * recommendation from the ASIC team
+ */
+ val = 0xff;
+#else
+ /* disable IO cache if non-DDR memory is used, e.g., external SRAM */
+ val = 0x0;
+#endif
+ for (pf_index = 0; pf_index < MAX_NR_NITRO_PF; pf_index++)
+ mmio_write_32(PAXC_BASE + PAXC_AXI_CFG_PF_OFFSET(pf_index),
+ val);
+
+ /*
+ * Set ARPROT and AWPROT to enable non-secure access from
+ * PAXC to all PFs, PF0 to PF7
+ */
+ mmio_write_32(PAXC_BASE + PAXC_ARPROT_PF_CFG, 0x22222222);
+ mmio_write_32(PAXC_BASE + PAXC_AWPROT_PF_CFG, 0x22222222);
+
+ mmio_write_32(PAXC_BASE + PAXC_ARQOS_PF_CFG, PAXC_ARQOS_VAL);
+ mmio_write_32(PAXC_BASE + PAXC_AWQOS_PF_CFG, PAXC_AWQOS_VAL);
+
+ INFO("PAXC init done\n");
+}
+
+/*
+ * These defines do not match the regfile but they are renamed in a way such
+ * that they are much more readible
+ */
+
+#define MHB_NIC_SECURITY_BASE 0x60500000
+#define MHB_NIC_PAXC_AXI_NS 0x0008
+#define MHB_NIC_IDM_NS 0x000c
+#define MHB_NIC_MHB_APB_NS 0x0010
+#define MHB_NIC_NITRO_AXI_NS 0x0014
+#define MHB_NIC_PCIE_AXI_NS 0x0018
+#define MHB_NIC_PAXC_APB_NS 0x001c
+#define MHB_NIC_EP_APB_NS 0x0020
+
+#define MHB_NIC_PAXC_APB_S_IDM_SHIFT 5
+#define MHB_NIC_EP_APB_S_IDM_SHIFT 4
+#define MHB_NIC_MHB_APB_S_IDM_SHIFT 3
+#define MHB_NIC_PAXC_AXI_S_IDM_SHIFT 2
+#define MHB_NIC_PCIE_AXI_S_IDM_SHIFT 1
+#define MHB_NIC_NITRO_AXI_S_IDM_SHIFT 0
+
+#define NIC400_NITRO_TOP_NIC_SECURITY_BASE 0x60d00000
+
+#define NITRO_NIC_SECURITY_3_SHIFT 0x14
+#define NITRO_NIC_SECURITY_4_SHIFT 0x18
+#define NITRO_NIC_SECURITY_5_SHIFT 0x1c
+#define NITRO_NIC_SECURITY_6_SHIFT 0x20
+
+void paxc_mhb_ns_init(void)
+{
+ unsigned int val;
+ uintptr_t mhb_nic_gpv = MHB_NIC_SECURITY_BASE;
+#ifndef NITRO_SECURE_ACCESS
+ uintptr_t nic400_nitro_gpv = NIC400_NITRO_TOP_NIC_SECURITY_BASE;
+#endif /* NITRO_SECURE_ACCESS */
+
+ /* set PAXC AXI to allow non-secure access */
+ val = mmio_read_32(mhb_nic_gpv + MHB_NIC_PAXC_AXI_NS);
+ val |= 0x1;
+ mmio_write_32(mhb_nic_gpv + MHB_NIC_PAXC_AXI_NS, val);
+
+ /* set various MHB IDM interfaces to allow non-secure access */
+ val = mmio_read_32(mhb_nic_gpv + MHB_NIC_IDM_NS);
+ val |= (0x1 << MHB_NIC_PAXC_APB_S_IDM_SHIFT);
+ val |= (0x1 << MHB_NIC_EP_APB_S_IDM_SHIFT);
+ val |= (0x1 << MHB_NIC_MHB_APB_S_IDM_SHIFT);
+ val |= (0x1 << MHB_NIC_PAXC_AXI_S_IDM_SHIFT);
+ val |= (0x1 << MHB_NIC_PCIE_AXI_S_IDM_SHIFT);
+ val |= (0x1 << MHB_NIC_NITRO_AXI_S_IDM_SHIFT);
+ mmio_write_32(mhb_nic_gpv + MHB_NIC_IDM_NS, val);
+
+ /* set MHB APB to allow non-secure access */
+ val = mmio_read_32(mhb_nic_gpv + MHB_NIC_MHB_APB_NS);
+ val |= 0x1;
+ mmio_write_32(mhb_nic_gpv + MHB_NIC_MHB_APB_NS, val);
+
+ /* set Nitro AXI to allow non-secure access */
+ val = mmio_read_32(mhb_nic_gpv + MHB_NIC_NITRO_AXI_NS);
+ val |= 0x1;
+ mmio_write_32(mhb_nic_gpv + MHB_NIC_NITRO_AXI_NS, val);
+
+ /* set PCIe AXI to allow non-secure access */
+ val = mmio_read_32(mhb_nic_gpv + MHB_NIC_PCIE_AXI_NS);
+ val |= 0x1;
+ mmio_write_32(mhb_nic_gpv + MHB_NIC_PCIE_AXI_NS, val);
+
+ /* set PAXC APB to allow non-secure access */
+ val = mmio_read_32(mhb_nic_gpv + MHB_NIC_PAXC_APB_NS);
+ val |= 0x1;
+ mmio_write_32(mhb_nic_gpv + MHB_NIC_PAXC_APB_NS, val);
+
+ /* set EP APB to allow non-secure access */
+ val = mmio_read_32(mhb_nic_gpv + MHB_NIC_EP_APB_NS);
+ val |= 0x1;
+ mmio_write_32(mhb_nic_gpv + MHB_NIC_EP_APB_NS, val);
+
+#ifndef NITRO_SECURE_ACCESS
+ /* Set NIC400 to allow non-secure access */
+ mmio_setbits_32(nic400_nitro_gpv + NITRO_NIC_SECURITY_3_SHIFT, 0x1);
+ mmio_setbits_32(nic400_nitro_gpv + NITRO_NIC_SECURITY_4_SHIFT, 0x1);
+ mmio_setbits_32(nic400_nitro_gpv + NITRO_NIC_SECURITY_5_SHIFT, 0x1);
+ mmio_setbits_32(nic400_nitro_gpv + NITRO_NIC_SECURITY_6_SHIFT, 0x1);
+#endif /* NITRO_SECURE_ACCESS */
+}
diff --git a/plat/brcm/board/stingray/src/pm.c b/plat/brcm/board/stingray/src/pm.c
new file mode 100644
index 0000000..a5ac2e7
--- /dev/null
+++ b/plat/brcm/board/stingray/src/pm.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2015 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/arm/ccn.h>
+#include <drivers/delay_timer.h>
+#include <lib/bakery_lock.h>
+#include <lib/mmio.h>
+#include <lib/psci/psci.h>
+#include <lib/spinlock.h>
+#include <plat/common/platform.h>
+
+#ifdef USE_PAXC
+#include <chimp.h>
+#endif
+#include <cmn_plat_util.h>
+#include <ihost_pm.h>
+#include <plat_brcm.h>
+#include <platform_def.h>
+
+static uint64_t plat_sec_entrypoint;
+
+/*******************************************************************************
+ * SR handler called when a power domain is about to be turned on. The
+ * mpidr determines the CPU to be turned on.
+ ******************************************************************************/
+static int brcm_pwr_domain_on(u_register_t mpidr)
+{
+ int cpuid;
+
+ cpuid = plat_brcm_calc_core_pos(mpidr);
+ INFO("mpidr :%lu, cpuid:%d\n", mpidr, cpuid);
+
+#ifdef USE_SINGLE_CLUSTER
+ if (cpuid > 1)
+ return PSCI_E_INTERN_FAIL;
+#endif
+
+ ihost_power_on_cluster(mpidr);
+
+ ihost_power_on_secondary_core(mpidr, plat_sec_entrypoint);
+
+ return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * SR handler called when a power domain has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from.
+ ******************************************************************************/
+static void brcm_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+ unsigned long cluster_id = MPIDR_AFFLVL1_VAL(read_mpidr());
+
+ assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
+ PLAT_LOCAL_STATE_OFF);
+
+ if (target_state->pwr_domain_state[MPIDR_AFFLVL1] ==
+ PLAT_LOCAL_STATE_OFF) {
+ INFO("Cluster #%lu entering to snoop/dvm domain\n", cluster_id);
+ ccn_enter_snoop_dvm_domain(1 << cluster_id);
+ }
+
+ /* Enable the gic cpu interface */
+ plat_brcm_gic_pcpu_init();
+
+ /* Program the gic per-cpu distributor or re-distributor interface */
+ plat_brcm_gic_cpuif_enable();
+
+ INFO("Gic Initialization done for this affinity instance\n");
+}
+
+static void __dead2 brcm_system_reset(void)
+{
+ uint32_t reset_type = SOFT_SYS_RESET_L1;
+
+#ifdef USE_PAXC
+ if (bcm_chimp_is_nic_mode())
+ reset_type = SOFT_RESET_L3;
+#endif
+ INFO("System rebooting - L%d...\n", reset_type);
+
+ plat_soft_reset(reset_type);
+
+ /* Prevent the function to return due to the attribute */
+ while (1)
+ ;
+}
+
+static int brcm_system_reset2(int is_vendor, int reset_type,
+ u_register_t cookie)
+{
+ INFO("System rebooting - L%d...\n", reset_type);
+
+ plat_soft_reset(reset_type);
+
+ /*
+ * plat_soft_reset cannot return (it is a __dead function),
+ * but brcm_system_reset2 has to return some value, even in
+ * this case.
+ */
+ return 0;
+}
+
+/*******************************************************************************
+ * Export the platform handlers via plat_brcm_psci_pm_ops. The ARM Standard
+ * platform will take care of registering the handlers with PSCI.
+ ******************************************************************************/
+const plat_psci_ops_t plat_brcm_psci_pm_ops = {
+ .pwr_domain_on = brcm_pwr_domain_on,
+ .pwr_domain_on_finish = brcm_pwr_domain_on_finish,
+ .system_reset = brcm_system_reset,
+ .system_reset2 = brcm_system_reset2
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+ const plat_psci_ops_t **psci_ops)
+{
+ *psci_ops = &plat_brcm_psci_pm_ops;
+ plat_sec_entrypoint = sec_entrypoint;
+
+ return 0;
+}
diff --git a/plat/brcm/board/stingray/src/scp_cmd.c b/plat/brcm/board/stingray/src/scp_cmd.c
new file mode 100644
index 0000000..2aa9519
--- /dev/null
+++ b/plat/brcm/board/stingray/src/scp_cmd.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2017-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <drivers/delay_timer.h>
+
+#include <platform_def.h>
+#include <scp.h>
+#include <scp_cmd.h>
+
+#include "m0_ipc.h"
+
+/*
+ * Reads a response from CRMU MAILBOX
+ * Assumes that access has been granted and locked.
+ * Note that this is just a temporary implementation until
+ * channels are introduced
+ */
+static void scp_read_response(crmu_response_t *resp)
+{
+ uint32_t code;
+
+ code = mmio_read_32(CRMU_MAIL_BOX0);
+ resp->completed = code & MCU_IPC_CMD_DONE_MASK;
+ resp->cmd = code & SCP_CMD_MASK;
+ resp->ret = (code & MCU_IPC_CMD_REPLY_MASK) >> MCU_IPC_CMD_REPLY_SHIFT;
+}
+
+/*
+ * Send a command to SCP and wait for timeout us.
+ * Return: 0 on success
+ * -1 if there was no proper reply from SCP
+ * >0 if there was a response from MCU, but
+ * command completed with an error.
+ */
+int scp_send_cmd(uint32_t cmd, uint32_t param, uint32_t timeout)
+{
+ int ret = -1;
+
+ mmio_write_32(CRMU_MAIL_BOX0, cmd);
+ mmio_write_32(CRMU_MAIL_BOX1, param);
+ do {
+ crmu_response_t scp_resp;
+
+ udelay(1);
+ scp_read_response(&scp_resp);
+ if (scp_resp.completed &&
+ (scp_resp.cmd == cmd)) {
+ /* This command has completed */
+ ret = scp_resp.ret;
+ break;
+ }
+ } while (--timeout);
+
+ return ret;
+}
diff --git a/plat/brcm/board/stingray/src/scp_utils.c b/plat/brcm/board/stingray/src/scp_utils.c
new file mode 100644
index 0000000..1d82cef
--- /dev/null
+++ b/plat/brcm/board/stingray/src/scp_utils.c
@@ -0,0 +1,227 @@
+/*
+ * Copyright (c) 2017-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+
+#include <bcm_elog_ddr.h>
+#include <brcm_mhu.h>
+#include <brcm_scpi.h>
+#include <chimp.h>
+#include <cmn_plat_util.h>
+#include <ddr_init.h>
+#include <scp.h>
+#include <scp_cmd.h>
+#include <scp_utils.h>
+
+#include "m0_cfg.h"
+#include "m0_ipc.h"
+
+#ifdef BCM_ELOG
+static void prepare_elog(void)
+{
+#if (CLEAN_DDR && !defined(MMU_DISABLED))
+ /*
+ * Now DDR has been initialized. We want to copy all the logs in SRAM
+ * into DDR so we will have much more space to store the logs in the
+ * next boot stage
+ */
+ bcm_elog_copy_log((void *)BCM_ELOG_BL31_BASE,
+ MIN(BCM_ELOG_BL2_SIZE, BCM_ELOG_BL31_SIZE)
+ );
+
+ /*
+ * We are almost at the end of BL2, and we can stop log here so we do
+ * not need to add 'bcm_elog_exit' to the standard BL2 code. The
+ * benefit of capturing BL2 logs after this is very minimal in a
+ * production system.
+ */
+ bcm_elog_exit();
+#endif
+
+ /*
+ * Notify CRMU that now it should pull logs from DDR instead of from
+ * FS4 SRAM.
+ */
+ SCP_WRITE_CFG(flash_log.can_use_ddr, 1);
+}
+#endif
+
+bool is_crmu_alive(void)
+{
+ return (scp_send_cmd(MCU_IPC_MCU_CMD_NOP, 0, SCP_CMD_DEFAULT_TIMEOUT_US)
+ == 0);
+}
+
+bool bcm_scp_issue_sys_reset(void)
+{
+ return (scp_send_cmd(MCU_IPC_MCU_CMD_L1_RESET, 0,
+ SCP_CMD_DEFAULT_TIMEOUT_US));
+}
+
+/*
+ * Note that this is just a temporary implementation until
+ * channels are introduced
+ */
+
+int plat_bcm_bl2_plat_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+ int scp_patch_activated, scp_patch_version;
+#ifndef EMULATION_SETUP
+ uint8_t active_ch_bitmap, i;
+#endif
+ uint32_t reset_state = 0;
+ uint32_t mcu_ap_init_param = 0;
+
+ /*
+ * First check if SCP patch has already been loaded
+ * Send NOP command and see if there is a valid response
+ */
+ scp_patch_activated =
+ (scp_send_cmd(MCU_IPC_MCU_CMD_NOP, 0,
+ SCP_CMD_DEFAULT_TIMEOUT_US) == 0);
+ if (scp_patch_activated) {
+ INFO("SCP Patch is already active.\n");
+
+ reset_state = SCP_READ_CFG(board_cfg.reset_state);
+ mcu_ap_init_param = SCP_READ_CFG(board_cfg.mcu_init_param);
+
+ /* Clear reset state, it's been already read */
+ SCP_WRITE_CFG(board_cfg.reset_state, 0);
+
+ if (mcu_ap_init_param & MCU_PATCH_LOADED_BY_NITRO) {
+ /*
+ * Reset "MCU_PATCH_LOADED_BY_NITRO" flag, but
+ * Preserve any other flags we don't deal with here
+ */
+ INFO("AP booted by Nitro\n");
+ SCP_WRITE_CFG(
+ board_cfg.mcu_init_param,
+ mcu_ap_init_param &
+ ~MCU_PATCH_LOADED_BY_NITRO
+ );
+ }
+ } else {
+ /*
+ * MCU Patch not loaded, so load it.
+ * MCU patch stamps critical points in REG9 (debug test-point)
+ * Display its last content here. This helps to locate
+ * where crash occurred if a CRMU watchdog kicked in.
+ */
+ int ret;
+
+ INFO("MCU Patch Point: 0x%x\n",
+ mmio_read_32(CRMU_IHOST_SW_PERSISTENT_REG9));
+
+ ret = download_scp_patch((void *)scp_bl2_image_info->image_base,
+ scp_bl2_image_info->image_size);
+ if (ret != 0)
+ return ret;
+
+ VERBOSE("SCP Patch loaded OK.\n");
+
+ ret = scp_send_cmd(MCU_IPC_MCU_CMD_INIT,
+ MCU_PATCH_LOADED_BY_AP,
+ SCP_CMD_SCP_BOOT_TIMEOUT_US);
+ if (ret) {
+ ERROR("SCP Patch could not initialize; error %d\n",
+ ret);
+ return ret;
+ }
+
+ INFO("SCP Patch successfully initialized.\n");
+ }
+
+ scp_patch_version = scp_send_cmd(MCU_IPC_MCU_CMD_GET_FW_VERSION, 0,
+ SCP_CMD_DEFAULT_TIMEOUT_US);
+ INFO("SCP Patch version :0x%x\n", scp_patch_version);
+
+ /* Next block just reports current AVS voltages (if applicable) */
+ {
+ uint16_t vcore_mv, ihost03_mv, ihost12_mv;
+
+ vcore_mv = SCP_READ_CFG16(vcore.millivolts) +
+ SCP_READ_CFG8(vcore.avs_cfg.additive_margin);
+ ihost03_mv = SCP_READ_CFG16(ihost03.millivolts) +
+ SCP_READ_CFG8(ihost03.avs_cfg.additive_margin);
+ ihost12_mv = SCP_READ_CFG16(ihost12.millivolts) +
+ SCP_READ_CFG8(ihost12.avs_cfg.additive_margin);
+
+ if (vcore_mv || ihost03_mv || ihost12_mv) {
+ INFO("AVS voltages from cfg (including margin)\n");
+ if (vcore_mv > 0)
+ INFO("%s\tVCORE: %dmv\n",
+ SCP_READ_CFG8(vcore.avs_cfg.avs_set) ?
+ "*" : "n/a", vcore_mv);
+ if (ihost03_mv > 0)
+ INFO("%s\tIHOST03: %dmv\n",
+ SCP_READ_CFG8(ihost03.avs_cfg.avs_set) ?
+ "*" : "n/a", ihost03_mv);
+ if (ihost12_mv > 0)
+ INFO("%s\tIHOST12: %dmv\n",
+ SCP_READ_CFG8(ihost12.avs_cfg.avs_set) ?
+ "*" : "n/a", ihost12_mv);
+ } else {
+ INFO("AVS settings not applicable\n");
+ }
+ }
+
+#if (CLEAN_DDR && !defined(MMU_DISABLED) && !defined(EMULATION_SETUP))
+ /* This will clean the DDR and enable ECC if set */
+ check_ddr_clean();
+#endif
+
+#if (WARMBOOT_DDR_S3_SUPPORT && ELOG_STORE_MEDIA_DDR)
+ elog_init_ddr_log();
+#endif
+
+#ifdef BCM_ELOG
+ /* Prepare ELOG to use DDR */
+ prepare_elog();
+#endif
+
+#ifndef EMULATION_SETUP
+ /* Ask ddr_init to save obtained DDR information into DDR */
+ ddr_info_save();
+#endif
+
+ /*
+ * Configure TMON DDR address.
+ * This cfg is common for all cases
+ */
+ SCP_WRITE_CFG(tmon_cfg.ddr_desc, TMON_SHARED_DDR_ADDRESS);
+
+ if (reset_state == SOFT_RESET_L3 && !mcu_ap_init_param) {
+ INFO("SCP configuration after L3 RESET done.\n");
+ return 0;
+ }
+
+ if (bcm_chimp_is_nic_mode())
+ /* Configure AP WDT to not reset the NIC interface */
+ SCP_WRITE_CFG(board_cfg.apwdt_reset_type, SOFT_RESET_L3);
+
+#if (WARMBOOT_DDR_S3_SUPPORT && ELOG_STORE_MEDIA_DDR)
+ /* When AP WDog triggers perform L3 reset if DDR err logging enabled */
+ SCP_WRITE_CFG(board_cfg.apwdt_reset_type, SOFT_RESET_L3);
+#endif
+
+#ifndef EMULATION_SETUP
+
+#ifdef DDR_SCRUB_ENA
+ ddr_scrub_enable();
+#endif
+ /* Fill the Active channel information */
+ active_ch_bitmap = get_active_ddr_channel();
+ for (i = 0; i < MAX_NR_DDR_CH; i++)
+ SCP_WRITE_CFG(ddr_cfg.ddr_cfg[i],
+ (active_ch_bitmap & BIT(i)) ? 1 : 0);
+#endif
+ return 0;
+}
diff --git a/plat/brcm/board/stingray/src/sdio.c b/plat/brcm/board/stingray/src/sdio.c
new file mode 100644
index 0000000..aa2b71a
--- /dev/null
+++ b/plat/brcm/board/stingray/src/sdio.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <sdio.h>
+#include <sr_def.h>
+#include <sr_utils.h>
+
+const SDIO_CFG sr_sdio0_cfg = {
+ .cfg_base = SR_IPROC_SDIO0_CFG_BASE,
+ .sid_base = SR_IPROC_SDIO0_SID_BASE,
+ .io_ctrl_base = SR_IPROC_SDIO0_IOCTRL_BASE,
+ .pad_base = SR_IPROC_SDIO0_PAD_BASE,
+};
+const SDIO_CFG sr_sdio1_cfg = {
+ .cfg_base = SR_IPROC_SDIO1_CFG_BASE,
+ .sid_base = SR_IPROC_SDIO1_SID_BASE,
+ .io_ctrl_base = SR_IPROC_SDIO1_IOCTRL_BASE,
+ .pad_base = SR_IPROC_SDIO1_PAD_BASE,
+};
+
+void brcm_stingray_sdio_init(void)
+{
+ unsigned int val;
+ const SDIO_CFG *sdio0_cfg, *sdio1_cfg;
+
+ sdio0_cfg = &sr_sdio0_cfg;
+ sdio1_cfg = &sr_sdio1_cfg;
+
+ INFO("set sdio0 caps\n");
+ /* SDIO0 CAPS0 */
+ val = SDIO0_CAP0_CFG;
+ INFO("caps0 0x%x\n", val);
+ mmio_write_32(sdio0_cfg->cfg_base + ICFG_SDIO_CAP0, val);
+
+ /* SDIO0 CAPS1 */
+ val = SDIO0_CAP1_CFG;
+ INFO("caps1 0x%x\n", val);
+ mmio_write_32(sdio0_cfg->cfg_base + ICFG_SDIO_CAP1, val);
+
+ mmio_write_32(sdio0_cfg->cfg_base + ICFG_SDIO_STRAPSTATUS_0,
+ SDIO_PRESETVAL0);
+ mmio_write_32(sdio0_cfg->cfg_base + ICFG_SDIO_STRAPSTATUS_1,
+ SDIO_PRESETVAL1);
+ mmio_write_32(sdio0_cfg->cfg_base + ICFG_SDIO_STRAPSTATUS_2,
+ SDIO_PRESETVAL2);
+ mmio_write_32(sdio0_cfg->cfg_base + ICFG_SDIO_STRAPSTATUS_3,
+ SDIO_PRESETVAL3);
+ mmio_write_32(sdio0_cfg->cfg_base + ICFG_SDIO_STRAPSTATUS_4,
+ SDIO_PRESETVAL4);
+
+ val = SR_SID_VAL(0x3, 0x0, 0x2) << SDIO_SID_SHIFT;
+ mmio_write_32(sdio0_cfg->sid_base + ICFG_SDIO_SID_ARADDR, val);
+ mmio_write_32(sdio0_cfg->sid_base + ICFG_SDIO_SID_AWADDR, val);
+
+ val = mmio_read_32(sdio0_cfg->io_ctrl_base);
+ val &= ~(0xff << 23); /* Clear ARCACHE and AWCACHE */
+ val |= (0xb7 << 23); /* Set ARCACHE and AWCACHE */
+ mmio_write_32(sdio0_cfg->io_ctrl_base, val);
+
+ mmio_clrsetbits_32(sdio0_cfg->pad_base + PAD_SDIO_CLK,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio0_cfg->pad_base + PAD_SDIO_DATA0,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio0_cfg->pad_base + PAD_SDIO_DATA1,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio0_cfg->pad_base + PAD_SDIO_DATA2,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio0_cfg->pad_base + PAD_SDIO_DATA3,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio0_cfg->pad_base + PAD_SDIO_DATA4,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio0_cfg->pad_base + PAD_SDIO_DATA5,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio0_cfg->pad_base + PAD_SDIO_DATA6,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio0_cfg->pad_base + PAD_SDIO_DATA7,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio0_cfg->pad_base + PAD_SDIO_CMD,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+
+ INFO("set sdio1 caps\n");
+
+ /* SDIO1 CAPS0 */
+ val = SDIO1_CAP0_CFG;
+ INFO("caps0 0x%x\n", val);
+ mmio_write_32(sdio1_cfg->cfg_base + ICFG_SDIO_CAP0, val);
+ /* SDIO1 CAPS1 */
+ val = SDIO1_CAP1_CFG;
+ INFO("caps1 0x%x\n", val);
+ mmio_write_32(sdio1_cfg->cfg_base + ICFG_SDIO_CAP1, val);
+
+ mmio_write_32(sdio1_cfg->cfg_base + ICFG_SDIO_STRAPSTATUS_0,
+ SDIO_PRESETVAL0);
+ mmio_write_32(sdio1_cfg->cfg_base + ICFG_SDIO_STRAPSTATUS_1,
+ SDIO_PRESETVAL1);
+ mmio_write_32(sdio1_cfg->cfg_base + ICFG_SDIO_STRAPSTATUS_2,
+ SDIO_PRESETVAL2);
+ mmio_write_32(sdio1_cfg->cfg_base + ICFG_SDIO_STRAPSTATUS_3,
+ SDIO_PRESETVAL3);
+ mmio_write_32(sdio1_cfg->cfg_base + ICFG_SDIO_STRAPSTATUS_4,
+ SDIO_PRESETVAL4);
+
+ val = SR_SID_VAL(0x3, 0x0, 0x3) << SDIO_SID_SHIFT;
+ mmio_write_32(sdio1_cfg->sid_base + ICFG_SDIO_SID_ARADDR, val);
+ mmio_write_32(sdio1_cfg->sid_base + ICFG_SDIO_SID_AWADDR, val);
+
+ val = mmio_read_32(sdio1_cfg->io_ctrl_base);
+ val &= ~(0xff << 23); /* Clear ARCACHE and AWCACHE */
+ val |= (0xb7 << 23); /* Set ARCACHE and AWCACHE */
+ mmio_write_32(sdio1_cfg->io_ctrl_base, val);
+
+ mmio_clrsetbits_32(sdio1_cfg->pad_base + PAD_SDIO_CLK,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio1_cfg->pad_base + PAD_SDIO_DATA0,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio1_cfg->pad_base + PAD_SDIO_DATA1,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio1_cfg->pad_base + PAD_SDIO_DATA2,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio1_cfg->pad_base + PAD_SDIO_DATA3,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio1_cfg->pad_base + PAD_SDIO_DATA4,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio1_cfg->pad_base + PAD_SDIO_DATA5,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio1_cfg->pad_base + PAD_SDIO_DATA6,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio1_cfg->pad_base + PAD_SDIO_DATA7,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+ mmio_clrsetbits_32(sdio1_cfg->pad_base + PAD_SDIO_CMD,
+ PAD_SDIO_MASK, PAD_SDIO_VALUE);
+
+ INFO("sdio init done\n");
+}
diff --git a/plat/brcm/board/stingray/src/sr_paxb_phy.c b/plat/brcm/board/stingray/src/sr_paxb_phy.c
new file mode 100644
index 0000000..7380e09
--- /dev/null
+++ b/plat/brcm/board/stingray/src/sr_paxb_phy.c
@@ -0,0 +1,806 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <paxb.h>
+#include <sr_def.h>
+#include <sr_utils.h>
+
+/* total number of PCIe Phys */
+#define NUM_OF_PCIE_SERDES 8
+
+#define CFG_RC_PMI_ADDR 0x1130
+#define PMI_RX_TERM_SEQ ((0x1 << 27) | (0x1ff << 16) | (0xd090))
+#define PMI_RX_TERM_VAL 0x4c00
+#define PMI_PLL_CTRL_4 0xd0b4
+#define PMI_SERDES_CLK_ENABLE (1 << 12)
+
+#define WAR_PLX_PRESET_PARITY_FAIL
+
+#define CFG_RC_REG_PHY_CTL_10 0x1838
+#define PHY_CTL_10_GEN3_MATCH_PARITY (1 << 15)
+
+#define PMI_X8_CORE0_7_PATCH_SEQ ((0x1 << 27) | (0x1ff << 16) | (0xd2a5))
+#define PMI_X8_CORE0_7_PATCH_VAL 0xd864
+
+#define PMI_ADDR_BCAST(addr) ((0x1 << 27) | (0x1ff << 16) | (addr))
+#define PMI_ADDR_LANE0(addr) ((0x1 << 27) | (addr))
+#define PMI_ADDR_LANE1(addr) ((0x1 << 27) | (0x1 << 16) | (addr))
+
+#define MERLIN16_PCIE_BLK2_PWRMGMT_7 ((0x1 << 27) | (0x1ff << 16) | 0x1208)
+#define MERLIN16_PCIE_BLK2_PWRMGMT_8 ((0x1 << 27) | (0x1ff << 16) | 0x1209)
+#define MERLIN16_AMS_TX_CTRL_5 ((0x1 << 27) | (0x1ff << 16) | 0xd0a5)
+#define MERLIN16_AMS_TX_CTRL_5_VAL \
+ ((1 << 13) | (1 << 12) | (1 << 11) | (1 << 10))
+#define MERLIN16_PCIE_BLK2_PWRMGMT_7_VAL 0x96
+#define MERLIN16_PCIE_BLK2_PWRMGMT_8_VAL 0x12c
+
+#define CFG_RC_PMI_WDATA 0x1134
+#define CFG_RC_WCMD_SHIFT 31
+#define CFG_RC_WCMD_MASK ((uint32_t)1U << CFG_RC_WCMD_SHIFT)
+#define CFG_RC_RCMD_SHIFT 30
+#define CFG_RC_RCMD_MASK ((uint32_t)1U << CFG_RC_RCMD_SHIFT)
+#define CFG_RC_RWCMD_MASK (CFG_RC_RCMD_MASK | CFG_RC_WCMD_MASK)
+#define CFG_RC_PMI_RDATA 0x1138
+#define CFG_RC_RACK_SHIFT 31
+#define CFG_RC_RACK_MASK ((uint32_t)1U << CFG_RC_RACK_SHIFT)
+
+/* allow up to 5 ms for PMI write to finish */
+#define PMI_TIMEOUT_MS 5
+
+/* in 2x8 RC mode, one needs to patch up Serdes 3 and 7 for link to come up */
+#define SERDES_PATCH_PIPEMUX_INDEX 0x3
+#define SERDES_PATCH_INDEX 0x8
+
+#define DSC_UC_CTRL 0xd00d
+#define DSC_UC_CTRL_RDY_CMD (1 << 7)
+#define LANE_DBG_RST_CTRL 0xd164
+#define UC_A_CLK_CTRL0 0xd200
+#define UC_A_RST_CTRL0 0xd201
+#define UC_A_AHB_CTRL0 0xd202
+#define UC_A_AHB_STAT0 0xd203
+#define UC_A_AHB_WADDR_LSW 0xd204
+#define UC_A_AHB_WADDR_MSW 0xd205
+#define UC_A_AHB_WDATA_LSW 0xd206
+#define UC_A_AHB_WDATA_MSW 0xd207
+#define UC_A_AHB_RADDR_LSW 0xd208
+#define UC_A_AHB_RADDR_MSW 0xd209
+#define UC_A_AHB_RDATA_LSW 0xd20a
+#define UC_A_AHB_RDATA_MSW 0xd20b
+#define UC_VERSION_NUM 0xd230
+#define DSC_SM_CTL22 0xd267
+#define UC_DBG1 0xd251
+
+#define LOAD_UC_CHECK 0
+#define UC_RAM_INIT_TIMEOUT 100
+#define UC_RAM_CONTROL 0xd225
+#define UC_INIT_TIMEOUT 100
+#define SIZE_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
+#define SZ_4 4
+#define GET_2_BYTES(p, i) ((uint16_t)p[i] | (uint16_t)p[i+1] << 8)
+
+/*
+ * List of PCIe LCPLL related registers
+ *
+ * LCPLL channel 0 provides the Serdes pad clock when running in RC mode
+ */
+#define PCIE_LCPLL_BASE 0x40000000
+
+#define PCIE_LCPLL_CTRL0_OFFSET 0x00
+#define PCIE_LCPLL_RESETB_SHIFT 31
+#define PCIE_LCPLL_RESETB_MASK BIT(PCIE_LCPLL_RESETB_SHIFT)
+#define PCIE_LCPLL_P_RESETB_SHIFT 30
+#define PCIE_LCPLL_P_RESETB_MASK BIT(PCIE_LCPLL_P_RESETB_SHIFT)
+
+#define PCIE_LCPLL_CTRL3_OFFSET 0x0c
+#define PCIE_LCPLL_EN_CTRL_SHIFT 16
+#define PCIE_LCPLL_CM_ENA 0x1a
+#define PCIE_LCPLL_CM_BUF_ENA 0x18
+#define PCIE_LCPLL_D2C2_ENA 0x2
+#define PCIE_LCPLL_REF_CLK_SHIFT 1
+#define PCIE_LCPLL_REF_CLK_MASK BIT(PCIE_LCPLL_REF_CLK_SHIFT)
+#define PCIE_LCPLL_CTRL13_OFFSET 0x34
+#define PCIE_LCPLL_D2C2_CTRL_SHIFT 16
+#define PCIE_LCPLL_D2C2_TERM_DISC 0xe0
+
+#define PCIE_LCPLL_STATUS_OFFSET 0x40
+#define PCIE_LCPLL_LOCK_SHIFT 12
+#define PCIE_LCPLL_LOCK_MASK BIT(PCIE_LCPLL_LOCK_SHIFT)
+
+#define PCIE_PIPE_MUX_RC_MODE_OVERRIDE_CFG 0x114
+#define PCIE_TX_CLKMASTER_CTRL_OVERRIDE_CFG 0x11c
+
+/* wait 500 microseconds for PCIe LCPLL to power up */
+#define PCIE_LCPLL_DELAY_US 500
+
+/* allow up to 5 ms for PCIe LCPLL VCO to lock */
+#define PCIE_LCPLL_TIMEOUT_MS 5
+
+#define PCIE_PIPE_MUX_CONFIGURATION_CFG 0x4000010c
+
+#define PCIE_PIPEMUX_SHIFT 19
+#define PCIE_PIPEMUX_MASK 0xf
+
+/* keep track of PIPEMUX index to use */
+static unsigned int pipemux_idx;
+
+/*
+ * PCIe PIPEMUX lookup table
+ *
+ * Each array index represents a PIPEMUX strap setting
+ * The array element represents a bitmap where a set bit means the PCIe core
+ * needs to be enabled as RC
+ */
+static uint8_t pipemux_table[] = {
+ /* PIPEMUX = 0, EP 1x16 */
+ 0x00,
+ /* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */
+ 0x80,
+ /* PIPEMUX = 2, EP 4x4 */
+ 0x00,
+ /* PIPEMUX = 3, RC 2x8, cores 0, 7 */
+ 0x81,
+ /* PIPEMUX = 4, RC 4x4, cores 0, 1, 6, 7 */
+ 0xc3,
+ /* PIPEMUX = 5, RC 8x2, all 8 cores */
+ 0xff,
+ /* PIPEMUX = 6, RC 3x4 + 2x2, cores 0, 2, 3, 6, 7 */
+ 0xcd,
+ /* PIPEMUX = 7, RC 1x4 + 6x2, cores 0, 2, 3, 4, 5, 6, 7 */
+ 0xfd,
+ /* PIPEMUX = 8, EP 1x8 + RC 4x2, cores 4, 5, 6, 7 */
+ 0xf0,
+ /* PIPEMUX = 9, EP 1x8 + RC 2x4, cores 6, 7 */
+ 0xc0,
+ /* PIPEMUX = 10, EP 2x4 + RC 2x4, cores 1, 6 */
+ 0x42,
+ /* PIPEMUX = 11, EP 2x4 + RC 4x2, cores 2, 3, 4, 5 */
+ 0x3c,
+ /* PIPEMUX = 12, EP 1x4 + RC 6x2, cores 2, 3, 4, 5, 6, 7 */
+ 0xfc,
+ /* PIPEMUX = 13, RC 2x4 + RC 1x4 + 2x2, cores 2, 3, 6 */
+ 0x4c,
+};
+
+/*
+ * Return 1 if pipemux strap is supported
+ */
+static int pipemux_strap_is_valid(uint32_t pipemux)
+{
+ if (pipemux < ARRAY_SIZE(pipemux_table))
+ return 1;
+ else
+ return 0;
+}
+
+/*
+ * Read the PCIe PIPEMUX from strap
+ */
+static uint32_t pipemux_strap_read(void)
+{
+ uint32_t pipemux;
+
+ pipemux = mmio_read_32(PCIE_PIPE_MUX_CONFIGURATION_CFG);
+ pipemux &= PCIE_PIPEMUX_MASK;
+ if (pipemux == PCIE_PIPEMUX_MASK) {
+ /* read the PCIe PIPEMUX strap setting */
+ pipemux = mmio_read_32(CDRU_CHIP_STRAP_DATA_LSW);
+ pipemux >>= PCIE_PIPEMUX_SHIFT;
+ pipemux &= PCIE_PIPEMUX_MASK;
+ }
+
+ return pipemux;
+}
+
+/*
+ * Store the PIPEMUX index (set for each boot)
+ */
+static void pipemux_save_index(unsigned int idx)
+{
+ pipemux_idx = idx;
+}
+
+static int paxb_sr_core_needs_enable(unsigned int core_idx)
+{
+ return !!((pipemux_table[pipemux_idx] >> core_idx) & 0x1);
+}
+
+static int pipemux_sr_init(void)
+{
+ uint32_t pipemux;
+
+ /* read the PCIe PIPEMUX strap setting */
+ pipemux = pipemux_strap_read();
+ if (!pipemux_strap_is_valid(pipemux)) {
+ ERROR("Invalid PCIe PIPEMUX strap %u\n", pipemux);
+ return -EIO;
+ }
+
+ /* no PCIe RC is needed */
+ if (!pipemux_table[pipemux]) {
+ WARN("PIPEMUX indicates no PCIe RC required\n");
+ return -ENODEV;
+ }
+
+ /* save the PIPEMUX strap */
+ pipemux_save_index(pipemux);
+
+ return 0;
+}
+
+/*
+ * PCIe RC serdes link width
+ *
+ * The array is first organized in rows as indexed by the PIPEMUX setting.
+ * Within each row, eight lane width entries are specified -- one entry
+ * per PCIe core, from 0 to 7.
+ *
+ * Note: The EP lanes/cores are not mapped in this table! EP cores are
+ * controlled and thus configured by Nitro.
+ */
+static uint8_t link_width_table[][NUM_OF_SR_PCIE_CORES] = {
+ /* PIPEMUX = 0, EP 1x16 */
+ {0, 0, 0, 0, 0, 0, 0, 0},
+ /* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */
+ {0, 0, 0, 0, 0, 0, 0, 8},
+ /* PIPEMUX = 2, EP 4x4 */
+ {0, 0, 0, 0, 0, 0, 0, 0},
+ /* PIPEMUX = 3, RC 2x8, cores 0, 7 */
+ {8, 0, 0, 0, 0, 0, 0, 8},
+ /* PIPEMUX = 4, RC 4x4, cores 0, 1, 6, 7 */
+ {4, 4, 0, 0, 0, 0, 4, 4},
+ /* PIPEMUX = 5, RC 8x2, all 8 cores */
+ {2, 2, 2, 2, 2, 2, 2, 2},
+ /* PIPEMUX = 6, RC 3x4 (cores 0, 6, 7), RC 2x2 (cores 2, 3) */
+ {4, 0, 2, 2, 0, 0, 4, 4},
+ /* PIPEMUX = 7, RC 1x4 (core 0), RC 6x2 (cores 2, 3, 4, 5, 6, 7 */
+ {4, 0, 2, 2, 2, 2, 2, 2},
+ /* PIPEMUX = 8, EP 1x8 + RC 4x2 (cores 4, 5, 6, 7) */
+ {0, 0, 0, 0, 2, 2, 2, 2},
+ /* PIPEMUX = 9, EP 1x8 + RC 2x4 (cores 6, 7) */
+ {0, 0, 0, 0, 0, 0, 4, 4},
+ /* PIPEMUX = 10, EP 2x4 + RC 2x4 (cores 1, 6) */
+ {0, 4, 0, 0, 0, 0, 4, 0},
+ /* PIPEMUX = 11, EP 2x4 + RC 4x2 (cores 2, 3, 4, 5) */
+ {0, 0, 2, 2, 2, 2, 0, 0},
+ /* PIPEMUX = 12, EP 1x4 + RC 6x2 (cores 2, 3, 4, 5, 6, 7) */
+ {0, 0, 2, 2, 2, 2, 2, 2},
+ /* PIPEMUX = 13, EP 2x4 + RC 1x4 (core 6) + RC 2x2 (cores 2, 3) */
+ {0, 0, 2, 2, 0, 0, 4, 0}
+};
+
+/*
+ * function for writes to the Serdes registers through the PMI interface
+ */
+static int paxb_pmi_write(unsigned int core_idx, uint32_t pmi, uint32_t val)
+{
+ uint32_t status;
+ unsigned int timeout = PMI_TIMEOUT_MS;
+
+ paxb_rc_cfg_write(core_idx, CFG_RC_PMI_ADDR, pmi);
+
+ val &= ~CFG_RC_RWCMD_MASK;
+ val |= CFG_RC_WCMD_MASK;
+ paxb_rc_cfg_write(core_idx, CFG_RC_PMI_WDATA, val);
+
+ do {
+ status = paxb_rc_cfg_read(core_idx, CFG_RC_PMI_WDATA);
+
+ /* wait for write command bit to clear */
+ if ((status & CFG_RC_WCMD_MASK) == 0)
+ return 0;
+ } while (--timeout);
+
+ return -EIO;
+}
+
+/*
+ * function for reads from the Serdes registers through the PMI interface
+ */
+static int paxb_pmi_read(unsigned int core_idx, uint32_t pmi, uint32_t *val)
+{
+ uint32_t status;
+ unsigned int timeout = PMI_TIMEOUT_MS;
+
+ paxb_rc_cfg_write(core_idx, CFG_RC_PMI_ADDR, pmi);
+
+ paxb_rc_cfg_write(core_idx, CFG_RC_PMI_WDATA, CFG_RC_RCMD_MASK);
+
+ do {
+ status = paxb_rc_cfg_read(core_idx, CFG_RC_PMI_RDATA);
+
+ /* wait for read ack bit set */
+ if ((status & CFG_RC_RACK_MASK)) {
+ *val = paxb_rc_cfg_read(core_idx, CFG_RC_PMI_RDATA);
+ return 0;
+ }
+ } while (--timeout);
+
+ return -EIO;
+}
+
+
+#ifndef BOARD_PCIE_EXT_CLK
+/*
+ * PCIe Override clock lookup table
+ *
+ * Each array index represents pcie override clock has been done
+ * by CFW or not.
+ */
+static uint8_t pcie_override_clk_table[] = {
+ /* PIPEMUX = 0, EP 1x16 */
+ 0x0,
+ /* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */
+ 0x1,
+ /* PIPEMUX = 2, EP 4x4 */
+ 0x0,
+ /* PIPEMUX = 3, RC 2x8, cores 0, 7 */
+ 0x0,
+ /* PIPEMUX = 4, RC 4x4, cores 0, 1, 6, 7 */
+ 0x0,
+ /* PIPEMUX = 5, RC 8x2, all 8 cores */
+ 0x0,
+ /* PIPEMUX = 6, RC 3x4 + 2x2, cores 0, 2, 3, 6, 7 */
+ 0x0,
+ /* PIPEMUX = 7, RC 1x4 + 6x2, cores 0, 2, 3, 4, 5, 6, 7 */
+ 0x0,
+ /* PIPEMUX = 8, EP 1x8 + RC 4x2, cores 4, 5, 6, 7 */
+ 0x0,
+ /* PIPEMUX = 9, EP 1x8 + RC 2x4, cores 6, 7 */
+ 0x0,
+ /* PIPEMUX = 10, EP 2x4 + RC 2x4, cores 1, 6 */
+ 0x0,
+ /* PIPEMUX = 11, EP 2x4 + RC 4x2, cores 2, 3, 4, 5 */
+ 0x0,
+ /* PIPEMUX = 12, EP 1x4 + RC 6x2, cores 2, 3, 4, 5, 6, 7 */
+ 0x0,
+ /* PIPEMUX = 13, RC 2x4 + RC 1x4 + 2x2, cores 2, 3, 6 */
+ 0x0,
+};
+
+/*
+ * Bring up LCPLL channel 0 reference clock for PCIe serdes used in RC mode
+ */
+static int pcie_lcpll_init(void)
+{
+ uintptr_t reg;
+ unsigned int timeout = PCIE_LCPLL_TIMEOUT_MS;
+ uint32_t val;
+
+ if (pcie_override_clk_table[pipemux_idx]) {
+ /*
+ * Check rc_mode_override again to avoid halt
+ * because of cfw uninitialized lcpll.
+ */
+ reg = (uintptr_t)(PCIE_LCPLL_BASE +
+ PCIE_PIPE_MUX_RC_MODE_OVERRIDE_CFG);
+ val = mmio_read_32(reg);
+ if (val & 0x1)
+ return 0;
+ else
+ return -ENODEV;
+ }
+
+ /* power on PCIe LCPLL and its LDO */
+ reg = (uintptr_t)CRMU_AON_CTRL1;
+ mmio_setbits_32(reg, CRMU_PCIE_LCPLL_PWR_ON_MASK |
+ CRMU_PCIE_LCPLL_PWRON_LDO_MASK);
+ udelay(PCIE_LCPLL_DELAY_US);
+
+ /* remove isolation */
+ mmio_clrbits_32(reg, CRMU_PCIE_LCPLL_ISO_IN_MASK);
+ udelay(PCIE_LCPLL_DELAY_US);
+
+ /* disconnect termination */
+ reg = (uintptr_t)(PCIE_LCPLL_BASE + PCIE_LCPLL_CTRL13_OFFSET);
+ mmio_setbits_32(reg, PCIE_LCPLL_D2C2_TERM_DISC <<
+ PCIE_LCPLL_D2C2_CTRL_SHIFT);
+
+ /* enable CML buf1/2 and D2C2 */
+ reg = (uintptr_t)(PCIE_LCPLL_BASE + PCIE_LCPLL_CTRL3_OFFSET);
+ mmio_setbits_32(reg, PCIE_LCPLL_CM_ENA << PCIE_LCPLL_EN_CTRL_SHIFT);
+
+ /* select diff clock mux out as ref clock */
+ mmio_clrbits_32(reg, PCIE_LCPLL_REF_CLK_MASK);
+
+ /* delay for 500 microseconds per ASIC spec for PCIe LCPLL */
+ udelay(PCIE_LCPLL_DELAY_US);
+
+ /* now bring PCIe LCPLL out of reset */
+ reg = (uintptr_t)(PCIE_LCPLL_BASE + PCIE_LCPLL_CTRL0_OFFSET);
+ mmio_setbits_32(reg, PCIE_LCPLL_RESETB_MASK);
+
+ /* wait for PLL to lock */
+ reg = (uintptr_t)(PCIE_LCPLL_BASE + PCIE_LCPLL_STATUS_OFFSET);
+ do {
+ val = mmio_read_32(reg);
+ if ((val & PCIE_LCPLL_LOCK_MASK) == PCIE_LCPLL_LOCK_MASK) {
+ /* now bring the post divider out of reset */
+ reg = (uintptr_t)(PCIE_LCPLL_BASE +
+ PCIE_LCPLL_CTRL0_OFFSET);
+ mmio_setbits_32(reg, PCIE_LCPLL_P_RESETB_MASK);
+ VERBOSE("PCIe LCPLL locked\n");
+ return 0;
+ }
+ mdelay(1);
+ } while (--timeout);
+
+ ERROR("PCIe LCPLL failed to lock\n");
+ return -EIO;
+}
+#else
+/*
+ * Bring up EXT CLK reference clock for PCIe serdes used in RC mode
+ * XTAL_BYPASS (3 << 0)
+ * INTR_LC_REF (5 << 0)
+ * PD_CML_LC_REF_OUT (1 << 4)
+ * PD_CML_REF_CH_OUT (1 << 8)
+ * CLK_MASTER_SEL (1 << 11)
+ * CLK_MASTER_CTRL_A (1 << 12)
+ * CLK_MASTER_CTRL_B (2 << 14)
+ */
+static const uint16_t pcie_ext_clk[][NUM_OF_PCIE_SERDES] = {
+ /* PIPEMUX = 0, EP 1x16 */
+ {0},
+ /* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */
+ {0},
+ /* PIPEMUX = 2, EP 4x4 */
+ {0},
+ /* PIPEMUX = 3, RC 2x8, cores 0, 7 */
+ {0x8803, 0x9115, 0x9115, 0x1115, 0x8803, 0x9115, 0x9115, 0x1115},
+ /* PIPEMUX = 4, RC 4x4, cores 0, 1, 6, 7 */
+ {0x8803, 0x1115, 0x8915, 0x1115, 0x8803, 0x1115, 0x8915, 0x1115,},
+ /* PIPEMUX = 5, RC 8x2, all 8 cores */
+ {0x0803, 0x0915, 0x0915, 0x0915, 0x0803, 0x0915, 0x0915, 0x0915,},
+ /* PIPEMUX = 6, RC 3x4 + 2x2, cores 0, 2, 3, 6, 7 */
+ {0},
+ /* PIPEMUX = 7, RC 1x4 + 6x2, cores 0, 2, 3, 4, 5, 6, 7 */
+ {0},
+ /* PIPEMUX = 8, EP 1x8 + RC 4x2, cores 4, 5, 6, 7 */
+ {0},
+ /* PIPEMUX = 9, EP 1x8 + RC 2x4, cores 6, 7 */
+ {0},
+ /* PIPEMUX = 10, EP 2x4 + RC 2x4, cores 1, 6 */
+ {0},
+ /* PIPEMUX = 11, EP 2x4 + RC 4x2, cores 2, 3, 4, 5 */
+ {0},
+ /* PIPEMUX = 12, EP 1x4 + RC 6x2, cores 2, 3, 4, 5, 6, 7 */
+ {0},
+ /* PIPEMUX = 13, RC 2x4 + RC 1x4 + 2x2, cores 2, 3, 6 */
+ {0},
+};
+
+static void pcie_ext_clk_init(void)
+{
+ unsigned int serdes;
+ uint32_t val;
+
+ for (serdes = 0; serdes < NUM_OF_PCIE_SERDES; serdes++) {
+ val = pcie_ext_clk[pipemux_idx][serdes];
+ if (!val)
+ return;
+ mmio_write_32(PCIE_CORE_RESERVED_CFG +
+ serdes * PCIE_CORE_PWR_OFFSET, val);
+ }
+ /* disable CML buf1/2 and enable D2C2 */
+ mmio_clrsetbits_32((PCIE_LCPLL_BASE + PCIE_LCPLL_CTRL3_OFFSET),
+ PCIE_LCPLL_CM_BUF_ENA << PCIE_LCPLL_EN_CTRL_SHIFT,
+ PCIE_LCPLL_D2C2_ENA << PCIE_LCPLL_EN_CTRL_SHIFT);
+ mmio_write_32(PCIE_LCPLL_BASE + PCIE_TX_CLKMASTER_CTRL_OVERRIDE_CFG, 1);
+ INFO("Overriding Clocking - using REF clock from PAD...\n");
+}
+#endif
+
+static int load_uc(unsigned int core_idx)
+{
+ return 0;
+}
+
+static int paxb_serdes_gate_clock(unsigned int core_idx, int gate_clk)
+{
+ unsigned int link_width, serdes, nr_serdes;
+ uintptr_t pmi_base;
+ unsigned int rdata;
+ uint32_t core_offset = core_idx * PCIE_CORE_PWR_OFFSET;
+
+ link_width = paxb->get_link_width(core_idx);
+ if (!link_width) {
+ ERROR("Unsupported PIPEMUX\n");
+ return -EOPNOTSUPP;
+ }
+
+ nr_serdes = link_width / 2;
+ pmi_base = (uintptr_t)(PCIE_CORE_PMI_CFG_BASE + core_offset);
+
+ for (serdes = 0; serdes < nr_serdes; serdes++) {
+ mmio_write_32(pmi_base, serdes);
+ paxb_pmi_read(core_idx, PMI_ADDR_LANE0(PMI_PLL_CTRL_4), &rdata);
+ if (!gate_clk)
+ rdata |= PMI_SERDES_CLK_ENABLE;
+ else
+ rdata &= ~PMI_SERDES_CLK_ENABLE;
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(PMI_PLL_CTRL_4), rdata);
+ }
+ return 0;
+}
+
+static int paxb_gen3_serdes_init(unsigned int core_idx, uint32_t nSerdes)
+{
+ uint32_t rdata;
+ int serdes;
+ uintptr_t pmi_base;
+ unsigned int timeout;
+ unsigned int reg_d230, reg_d267;
+
+
+ pmi_base = (uintptr_t)(PCIE_CORE_PMI_CFG_BASE +
+ (core_idx * PCIE_CORE_PWR_OFFSET));
+
+ for (serdes = 0; serdes < nSerdes; serdes++) {
+ /* select the PMI interface */
+ mmio_write_32(pmi_base, serdes);
+
+ /* Clock enable */
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(UC_A_CLK_CTRL0),
+ 0x3);
+
+ /* Release reset of master */
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(UC_A_RST_CTRL0),
+ 0x1);
+
+ /* clearing PRAM memory */
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(UC_A_AHB_CTRL0),
+ 0x100);
+
+ timeout = UC_RAM_INIT_TIMEOUT;
+ do {
+ paxb_pmi_read(core_idx,
+ PMI_ADDR_LANE0(UC_A_AHB_STAT0),
+ &rdata);
+ } while ((rdata & 0x01) == 0 && timeout--);
+
+ if (!timeout)
+ return -EIO;
+
+ timeout = UC_RAM_INIT_TIMEOUT;
+ do {
+ paxb_pmi_read(core_idx,
+ PMI_ADDR_LANE1(UC_A_AHB_STAT0),
+ &rdata);
+ } while ((rdata & 0x01) == 0 && timeout--);
+
+ if (!timeout)
+ return -EIO;
+
+ /* clearing PRAM memory */
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(UC_A_AHB_CTRL0),
+ 0);
+
+ /* to identify 2 lane serdes */
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(UC_DBG1), 0x1);
+
+ /* De-Assert Pram & master resets */
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(UC_A_RST_CTRL0),
+ 0x9);
+
+ if (load_uc(core_idx))
+ return -EIO;
+
+ /* UC UC ready for command */
+ paxb_pmi_read(core_idx, PMI_ADDR_LANE0(DSC_UC_CTRL),
+ &rdata);
+ rdata |= DSC_UC_CTRL_RDY_CMD;
+ paxb_pmi_write(core_idx, PMI_ADDR_LANE0(DSC_UC_CTRL),
+ rdata);
+
+ paxb_pmi_read(core_idx, PMI_ADDR_LANE1(DSC_UC_CTRL),
+ &rdata);
+ rdata |= DSC_UC_CTRL_RDY_CMD;
+ paxb_pmi_write(core_idx, PMI_ADDR_LANE1(DSC_UC_CTRL),
+ rdata);
+
+ /* Lane reset */
+ paxb_pmi_write(core_idx,
+ PMI_ADDR_BCAST(LANE_DBG_RST_CTRL), 0x3);
+
+ /* De-Assert Core and Master resets */
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(UC_A_RST_CTRL0),
+ 0x3);
+
+ timeout = UC_INIT_TIMEOUT;
+ while (timeout--) {
+ paxb_pmi_read(core_idx,
+ PMI_ADDR_LANE0(UC_VERSION_NUM),
+ &reg_d230);
+ paxb_pmi_read(core_idx,
+ PMI_ADDR_LANE0(DSC_SM_CTL22),
+ &reg_d267);
+
+ if (((reg_d230 & 0xffff) != 0) &
+ ((reg_d267 & 0xc000) == 0xc000)) {
+ break;
+ }
+ mdelay(1);
+ }
+
+ if (!timeout)
+ return -EIO;
+
+ timeout = UC_INIT_TIMEOUT;
+ while (timeout--) {
+ paxb_pmi_read(core_idx,
+ PMI_ADDR_LANE1(UC_VERSION_NUM),
+ &reg_d230);
+ paxb_pmi_read(core_idx,
+ PMI_ADDR_LANE1(DSC_SM_CTL22),
+ &reg_d267);
+
+ if (((reg_d230 & 0xffff) != 0) &
+ ((reg_d267 & 0xc000) == 0xc000)) {
+ break;
+ }
+ mdelay(1);
+ }
+
+ if (!timeout)
+ return -EIO;
+ }
+ return 0;
+}
+
+static int pcie_serdes_requires_patch(unsigned int serdes_idx)
+{
+ if (pipemux_idx != SERDES_PATCH_PIPEMUX_INDEX)
+ return 0;
+
+ return !!((SERDES_PATCH_INDEX >> serdes_idx) & 0x1);
+}
+
+static void pcie_tx_coeff_p7(unsigned int core_idx)
+{
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(0xd11b), 0x00aa);
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(0xd11c), 0x1155);
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(0xd11d), 0x2449);
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(0xd11e), 0x000f);
+ paxb_pmi_write(core_idx, PMI_ADDR_BCAST(0xd307), 0x0001);
+}
+
+
+static unsigned int paxb_sr_get_rc_link_width(unsigned int core_idx)
+{
+ return link_width_table[pipemux_idx][core_idx];
+}
+
+static uint32_t paxb_sr_get_rc_link_speed(void)
+{
+ return GEN3_LINK_SPEED;
+}
+
+
+static int paxb_serdes_init(unsigned int core_idx, unsigned int nr_serdes)
+{
+ uint32_t core_offset = core_idx * PCIE_CORE_PWR_OFFSET;
+ unsigned int serdes;
+ uintptr_t pmi_base;
+ int ret;
+
+ /*
+ * Each serdes has a x2 link width
+ *
+ * Use PAXB to patch the serdes for proper RX termination through the
+ * PMI interface
+ */
+ pmi_base = (uintptr_t)(PCIE_CORE_PMI_CFG_BASE + core_offset);
+ for (serdes = 0; serdes < nr_serdes; serdes++) {
+ /* select the PMI interface */
+ mmio_write_32(pmi_base, serdes);
+
+ /* patch Serdes for RX termination */
+ ret = paxb_pmi_write(core_idx, PMI_RX_TERM_SEQ,
+ PMI_RX_TERM_VAL);
+ if (ret)
+ goto err_pmi;
+
+ ret = paxb_pmi_write(core_idx, MERLIN16_PCIE_BLK2_PWRMGMT_7,
+ MERLIN16_PCIE_BLK2_PWRMGMT_7_VAL);
+ if (ret)
+ goto err_pmi;
+
+ ret = paxb_pmi_write(core_idx, MERLIN16_PCIE_BLK2_PWRMGMT_8,
+ MERLIN16_PCIE_BLK2_PWRMGMT_8_VAL);
+ if (ret)
+ goto err_pmi;
+
+ ret = paxb_pmi_write(core_idx, MERLIN16_AMS_TX_CTRL_5,
+ MERLIN16_AMS_TX_CTRL_5_VAL);
+ if (ret)
+ goto err_pmi;
+
+ pcie_tx_coeff_p7(core_idx);
+
+ if (pcie_serdes_requires_patch(serdes)) {
+ if (((core_idx == 0) || (core_idx == 7))) {
+ ret = paxb_pmi_write(core_idx,
+ PMI_X8_CORE0_7_PATCH_SEQ,
+ PMI_X8_CORE0_7_PATCH_VAL);
+ if (ret)
+ goto err_pmi;
+ }
+ }
+ }
+
+ return 0;
+
+err_pmi:
+ ERROR("PCIe PMI write failed\n");
+ return ret;
+}
+
+static int paxb_sr_phy_init(void)
+{
+ int ret;
+ unsigned int core_idx;
+
+#ifndef BOARD_PCIE_EXT_CLK
+ ret = pcie_lcpll_init();
+ if (ret)
+ return ret;
+#else
+ pcie_ext_clk_init();
+#endif
+
+ for (core_idx = 0; core_idx < paxb->num_cores; core_idx++) {
+ if (!pcie_core_needs_enable(core_idx))
+ continue;
+ unsigned int link_width;
+
+ paxb_serdes_gate_clock(core_idx, 0);
+
+ link_width = paxb->get_link_width(core_idx);
+ if (!link_width) {
+ ERROR("Unsupported PIPEMUX\n");
+ return -EOPNOTSUPP;
+ }
+
+ ret = paxb_serdes_init(core_idx, link_width / 2);
+ if (ret) {
+ ERROR("PCIe serdes initialization failed for core %u\n",
+ core_idx);
+ return ret;
+ }
+
+
+ ret = paxb_gen3_serdes_init(core_idx, link_width / 2);
+ if (ret) {
+ ERROR("PCIe GEN3 serdes initialization failed\n");
+ return ret;
+ }
+
+ }
+ return 0;
+}
+
+const paxb_cfg sr_paxb_cfg = {
+ .type = PAXB_SR,
+ .device_id = SR_B0_DEVICE_ID,
+ .pipemux_init = pipemux_sr_init,
+ .phy_init = paxb_sr_phy_init,
+ .core_needs_enable = paxb_sr_core_needs_enable,
+ .num_cores = NUM_OF_SR_PCIE_CORES,
+ .get_link_width = paxb_sr_get_rc_link_width,
+ .get_link_speed = paxb_sr_get_rc_link_speed,
+};
+
+const paxb_cfg *paxb_get_sr_config(void)
+{
+ return &sr_paxb_cfg;
+}
diff --git a/plat/brcm/board/stingray/src/topology.c b/plat/brcm/board/stingray/src/topology.c
new file mode 100644
index 0000000..24718e5
--- /dev/null
+++ b/plat/brcm/board/stingray/src/topology.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2019-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <stdint.h>
+
+#include <plat_brcm.h>
+#include <platform_def.h>
+
+/*
+ * On Stingray, the system power level is the highest power level.
+ * The first entry in the power domain descriptor specifies the
+ * number of system power domains i.e. 1.
+ */
+#define SR_PWR_DOMAINS_AT_MAX_PWR_LVL 1
+
+/*
+ * The Stingray power domain tree descriptor. The cluster power domains
+ * are arranged so that when the PSCI generic code creates the power
+ * domain tree, the indices of the CPU power domain nodes it allocates
+ * match the linear indices returned by plat_core_pos_by_mpidr()
+ * i.e. CLUSTER0 CPUs are allocated indices from 0 to 1 and the higher
+ * indices for other Cluster CPUs.
+ */
+const unsigned char sr_power_domain_tree_desc[] = {
+ /* No of root nodes */
+ SR_PWR_DOMAINS_AT_MAX_PWR_LVL,
+ /* No of children for the root node */
+ BRCM_CLUSTER_COUNT,
+ /* No of children for the first cluster node */
+ PLATFORM_CLUSTER0_CORE_COUNT,
+ /* No of children for the second cluster node */
+ PLATFORM_CLUSTER1_CORE_COUNT,
+ /* No of children for the third cluster node */
+ PLATFORM_CLUSTER2_CORE_COUNT,
+ /* No of children for the fourth cluster node */
+ PLATFORM_CLUSTER3_CORE_COUNT,
+};
+
+/*******************************************************************************
+ * This function returns the Stingray topology tree information.
+ ******************************************************************************/
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+ return sr_power_domain_tree_desc;
+}
+
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+ return plat_brcm_calc_core_pos(mpidr);
+}
diff --git a/plat/brcm/board/stingray/src/tz_sec.c b/plat/brcm/board/stingray/src/tz_sec.c
new file mode 100644
index 0000000..07b12a7
--- /dev/null
+++ b/plat/brcm/board/stingray/src/tz_sec.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <drivers/arm/tzc400.h>
+#include <lib/mmio.h>
+
+#include <cmn_sec.h>
+#include <platform_def.h>
+
+/*
+ * Trust Zone controllers
+ */
+#define TZC400_FS_SRAM_ROOT 0x66d84000
+
+/*
+ * TZPC Master configure registers
+ */
+
+/* TZPC_TZPCDECPROT0set */
+#define TZPC0_MASTER_NS_BASE 0x68b40804
+#define TZPC0_SATA3_BIT 5
+#define TZPC0_SATA2_BIT 4
+#define TZPC0_SATA1_BIT 3
+#define TZPC0_SATA0_BIT 2
+#define TZPC0_USB3H1_BIT 1
+#define TZPC0_USB3H0_BIT 0
+#define TZPC0_MASTER_SEC_DEFAULT 0
+
+/* TZPC_TZPCDECPROT1set */
+#define TZPC1_MASTER_NS_BASE 0x68b40810
+#define TZPC1_SDIO1_BIT 6
+#define TZPC1_SDIO0_BIT 5
+#define TZPC1_AUDIO0_BIT 4
+#define TZPC1_USB2D_BIT 3
+#define TZPC1_USB2H1_BIT 2
+#define TZPC1_USB2H0_BIT 1
+#define TZPC1_AMAC0_BIT 0
+#define TZPC1_MASTER_SEC_DEFAULT 0
+
+
+struct tz_sec_desc {
+ uintptr_t addr;
+ uint32_t val;
+};
+
+static const struct tz_sec_desc tz_master_defaults[] = {
+{ TZPC0_MASTER_NS_BASE, TZPC0_MASTER_SEC_DEFAULT },
+{ TZPC1_MASTER_NS_BASE, TZPC1_MASTER_SEC_DEFAULT }
+};
+
+/*
+ * Initialize the TrustZone Controller for SRAM partitioning.
+ */
+static void bcm_tzc_setup(void)
+{
+ VERBOSE("Configuring SRAM TrustZone Controller\n");
+
+ /* Init the TZASC controller */
+ tzc400_init(TZC400_FS_SRAM_ROOT);
+
+ /*
+ * Close the entire SRAM space
+ * Region 0 covers the entire SRAM space
+ * None of the NS device can access it.
+ */
+ tzc400_configure_region0(TZC_REGION_S_RDWR, 0);
+
+ /* Do raise an exception if a NS device tries to access secure memory */
+ tzc400_set_action(TZC_ACTION_ERR);
+}
+
+/*
+ * Configure TZ Master as NS_MASTER or SECURE_MASTER
+ * To set a Master to non-secure, use *_SET registers
+ * To set a Master to secure, use *_CLR registers (set + 0x4 address)
+ */
+static void tz_master_set(uint32_t base, uint32_t value, uint32_t ns)
+{
+ if (ns == SECURE_MASTER) {
+ mmio_write_32(base + 4, value);
+ } else {
+ mmio_write_32(base, value);
+ }
+}
+
+/*
+ * Initialize the secure environment for sdio.
+ */
+void plat_tz_sdio_ns_master_set(uint32_t ns)
+{
+ tz_master_set(TZPC1_MASTER_NS_BASE,
+ 1 << TZPC1_SDIO0_BIT,
+ ns);
+}
+
+/*
+ * Initialize the secure environment for usb.
+ */
+void plat_tz_usb_ns_master_set(uint32_t ns)
+{
+ tz_master_set(TZPC1_MASTER_NS_BASE,
+ 1 << TZPC1_USB2H0_BIT,
+ ns);
+}
+
+/*
+ * Set masters to default configuration.
+ *
+ * DMA security settings are programmed into the PL-330 controller and
+ * are not set by iProc TZPC registers.
+ * DMA always comes up as secure master (*NS bit is 0).
+ *
+ * Because the default reset values of TZPC are 0 (== Secure),
+ * ARM Verilog code makes all masters, including PCIe, come up as
+ * secure.
+ * However, SOTP has a bit called SOTP_ALLMASTER_NS that overrides
+ * TZPC and makes all masters non-secure for AB devices.
+ *
+ * Hence we first set all the TZPC bits to program all masters,
+ * including PCIe, as non-secure, then set the CLEAR_ALLMASTER_NS bit
+ * so that the SOTP_ALLMASTER_NS cannot override TZPC.
+ * now security settings for each masters come from TZPC
+ * (which makes all masters other than DMA as non-secure).
+ *
+ * During the boot, all masters other than DMA Ctrlr + list
+ * are non-secure in an AB Prod/AB Dev/AB Pending device.
+ *
+ */
+void plat_tz_master_default_cfg(void)
+{
+ int i;
+
+ /* Configure default secure and non-secure TZ Masters */
+ for (i = 0; i < ARRAY_SIZE(tz_master_defaults); i++) {
+ tz_master_set(tz_master_defaults[i].addr,
+ tz_master_defaults[i].val,
+ SECURE_MASTER);
+ tz_master_set(tz_master_defaults[i].addr,
+ ~tz_master_defaults[i].val,
+ NS_MASTER);
+ }
+
+ /* Clear all master NS */
+ mmio_setbits_32(SOTP_CHIP_CTRL,
+ 1 << SOTP_CLEAR_SYSCTRL_ALL_MASTER_NS);
+
+ /* Initialize TZ controller and Set SRAM to secure */
+ bcm_tzc_setup();
+}
diff --git a/plat/brcm/common/brcm_bl2_mem_params_desc.c b/plat/brcm/common/brcm_bl2_mem_params_desc.c
new file mode 100644
index 0000000..aed99d9
--- /dev/null
+++ b/plat/brcm/common/brcm_bl2_mem_params_desc.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/bl_common.h>
+#include <common/desc_image_load.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+/*******************************************************************************
+ * Following descriptor provides BL image/ep information that gets used
+ * by BL2 to load the images and also subset of this information is
+ * passed to next BL image. The image loading sequence is managed by
+ * populating the images in required loading order. The image execution
+ * sequence is managed by populating the `next_handoff_image_id` with
+ * the next executable image id.
+ ******************************************************************************/
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+#ifdef SCP_BL2_BASE
+ /* Fill SCP_BL2 related information if it exists */
+ {
+ .image_id = SCP_BL2_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = PLAT_MAX_SCP_BL2_SIZE,
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+#endif /* SCP_BL2_BASE */
+
+ /* Fill BL31 related information */
+ {
+ .image_id = BL31_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
+#if DEBUG
+ .ep_info.args.arg3 = BRCM_BL31_PLAT_PARAM_VAL,
+#endif
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+
+#ifdef BL32_BASE
+ .next_handoff_image_id = BL32_IMAGE_ID,
+#else
+ .next_handoff_image_id = BL33_IMAGE_ID,
+#endif
+ },
+
+#ifdef BL32_BASE
+ /* Fill BL32 related information */
+ {
+ .image_id = BL32_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+
+ .next_handoff_image_id = BL33_IMAGE_ID,
+ },
+#endif /* BL32_BASE */
+
+ /* Fill BL33 related information */
+ {
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+#ifdef PRELOADED_BL33_BASE
+ .ep_info.pc = PRELOADED_BL33_BASE,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+#else
+ .ep_info.pc = PLAT_BRCM_NS_IMAGE_OFFSET,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = PLAT_BRCM_NS_IMAGE_OFFSET,
+ .image_info.image_max_size = BRCM_DRAM1_SIZE,
+#endif /* PRELOADED_BL33_BASE */
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ }
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
diff --git a/plat/brcm/common/brcm_bl2_setup.c b/plat/brcm/common/brcm_bl2_setup.c
new file mode 100644
index 0000000..9a7153b
--- /dev/null
+++ b/plat/brcm/common/brcm_bl2_setup.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <drivers/arm/sp804_delay_timer.h>
+#include <lib/mmio.h>
+
+#include <bcm_console.h>
+#include <platform_def.h>
+#include <plat/brcm/common/plat_brcm.h>
+
+/* Data structure which holds the extents of the trusted SRAM for BL2 */
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+/* Weak definitions may be overridden in specific BRCM platform */
+#pragma weak plat_bcm_bl2_platform_setup
+#pragma weak plat_bcm_bl2_plat_arch_setup
+#pragma weak plat_bcm_security_setup
+#pragma weak plat_bcm_bl2_plat_handle_scp_bl2
+#pragma weak plat_bcm_bl2_early_platform_setup
+
+void plat_bcm_bl2_early_platform_setup(void)
+{
+}
+
+void plat_bcm_bl2_platform_setup(void)
+{
+}
+
+void plat_bcm_bl2_plat_arch_setup(void)
+{
+}
+
+void plat_bcm_security_setup(void)
+{
+}
+
+void bcm_bl2_early_platform_setup(uintptr_t tb_fw_config,
+ meminfo_t *mem_layout)
+{
+ /* Initialize the console to provide early debug support */
+ bcm_console_boot_init();
+
+ /* Setup the BL2 memory layout */
+ bl2_tzram_layout = *mem_layout;
+
+ /* Initialise the IO layer and register platform IO devices */
+ plat_brcm_io_setup();
+
+ /* Log HW reset event */
+ INFO("RESET: 0x%x\n",
+ mmio_read_32(CRMU_RESET_EVENT_LOG));
+}
+
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+{
+ /* SoC specific setup */
+ plat_bcm_bl2_early_platform_setup();
+
+ /* Initialize delay timer driver using SP804 dual timer 0 */
+ sp804_timer_init(SP804_TIMER0_BASE,
+ SP804_TIMER0_CLKMULT, SP804_TIMER0_CLKDIV);
+
+ /* BRCM platforms generic setup */
+ bcm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
+}
+
+/*
+ * Perform Broadcom platform setup.
+ */
+void bcm_bl2_platform_setup(void)
+{
+ /* Initialize the secure environment */
+ plat_bcm_security_setup();
+}
+
+void bl2_platform_setup(void)
+{
+ bcm_bl2_platform_setup();
+ plat_bcm_bl2_platform_setup();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only initializes the mmu in a quick and dirty way.
+ ******************************************************************************/
+void bcm_bl2_plat_arch_setup(void)
+{
+#ifndef MMU_DISABLED
+ if (!(read_sctlr_el1() & SCTLR_M_BIT)) {
+ const mmap_region_t bl_regions[] = {
+ MAP_REGION_FLAT(bl2_tzram_layout.total_base,
+ bl2_tzram_layout.total_size,
+ MT_MEMORY | MT_RW | MT_SECURE),
+ MAP_REGION_FLAT(BL_CODE_BASE,
+ BL_CODE_END - BL_CODE_BASE,
+ MT_CODE | MT_SECURE),
+ MAP_REGION_FLAT(BL_RO_DATA_BASE,
+ BL_RO_DATA_END - BL_RO_DATA_BASE,
+ MT_RO_DATA | MT_SECURE),
+#if USE_COHERENT_MEM
+ MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
+ BL_COHERENT_RAM_END -
+ BL_COHERENT_RAM_BASE,
+ MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+ {0}
+ };
+
+ setup_page_tables(bl_regions, plat_brcm_get_mmap());
+ enable_mmu_el1(0);
+ }
+#endif
+}
+
+void bl2_plat_arch_setup(void)
+{
+#ifdef ENA_MMU_BEFORE_DDR_INIT
+ /*
+ * Once MMU is enabled before DDR, MEMORY TESTS
+ * get affected as read/write transaction might occures from
+ * caches. So For running memory test, one should not set this
+ * flag.
+ */
+ bcm_bl2_plat_arch_setup();
+ plat_bcm_bl2_plat_arch_setup();
+#else
+ plat_bcm_bl2_plat_arch_setup();
+ bcm_bl2_plat_arch_setup();
+#endif
+}
+
+int bcm_bl2_handle_post_image_load(unsigned int image_id)
+{
+ int err = 0;
+
+ bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+
+ assert(bl_mem_params);
+
+ switch (image_id) {
+ case BL32_IMAGE_ID:
+ bl_mem_params->ep_info.spsr = brcm_get_spsr_for_bl32_entry();
+ break;
+
+ case BL33_IMAGE_ID:
+ /* BL33 expects to receive the primary CPU MPID (through r0) */
+ bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+ bl_mem_params->ep_info.spsr = brcm_get_spsr_for_bl33_entry();
+ break;
+
+#ifdef SCP_BL2_BASE
+ case SCP_BL2_IMAGE_ID:
+ /* The subsequent handling of SCP_BL2 is platform specific */
+ err = bcm_bl2_handle_scp_bl2(&bl_mem_params->image_info);
+ if (err)
+ WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
+ break;
+#endif
+ default:
+ /* Do nothing in default case */
+ break;
+ }
+
+ return err;
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bcm_bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+ return bcm_bl2_handle_post_image_load(image_id);
+}
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+ return bcm_bl2_plat_handle_post_image_load(image_id);
+}
+
+#ifdef SCP_BL2_BASE
+int plat_bcm_bl2_plat_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+ return 0;
+}
+
+int bcm_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+ return plat_bcm_bl2_plat_handle_scp_bl2(scp_bl2_image_info);
+}
+#endif
diff --git a/plat/brcm/common/brcm_bl31_setup.c b/plat/brcm/common/brcm_bl31_setup.c
new file mode 100644
index 0000000..d3fa83d
--- /dev/null
+++ b/plat/brcm/common/brcm_bl31_setup.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/arm/sp804_delay_timer.h>
+#include <lib/utils.h>
+#include <plat/common/platform.h>
+
+#include <bcm_console.h>
+#include <plat_brcm.h>
+#include <platform_def.h>
+
+#ifdef BL33_SHARED_DDR_BASE
+struct bl33_info *bl33_info = (struct bl33_info *)BL33_SHARED_DDR_BASE;
+#endif
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+/* Weak definitions may be overridden in specific BRCM platform */
+#pragma weak plat_bcm_bl31_early_platform_setup
+#pragma weak plat_brcm_pwrc_setup
+#pragma weak plat_brcm_security_setup
+
+void plat_brcm_security_setup(void)
+{
+
+}
+
+void plat_brcm_pwrc_setup(void)
+{
+
+}
+
+void plat_bcm_bl31_early_platform_setup(void *from_bl2,
+ bl_params_t *plat_params_from_bl2)
+{
+
+}
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+ entry_point_info_t *next_image_info;
+
+ assert(sec_state_is_valid(type));
+ next_image_info = (type == NON_SECURE)
+ ? &bl33_image_ep_info : &bl32_image_ep_info;
+ /*
+ * None of the images on the ARM development platforms can have 0x0
+ * as the entrypoint
+ */
+ if (next_image_info->pc)
+ return next_image_info;
+ else
+ return NULL;
+}
+
+/*******************************************************************************
+ * Perform any BL31 early platform setup common to ARM standard platforms.
+ * Here is an opportunity to copy parameters passed by the calling EL (S-EL1
+ * in BL2 & EL3 in BL1) before they are lost (potentially). This needs to be
+ * done before the MMU is initialized so that the memory layout can be used
+ * while creating page tables. BL2 has flushed this information to memory, so
+ * we are guaranteed to pick up good data.
+ ******************************************************************************/
+void __init brcm_bl31_early_platform_setup(void *from_bl2,
+ uintptr_t soc_fw_config,
+ uintptr_t hw_config,
+ void *plat_params_from_bl2)
+{
+ /* Initialize the console to provide early debug support */
+ bcm_console_boot_init();
+
+ /* Initialize delay timer driver using SP804 dual timer 0 */
+ sp804_timer_init(SP804_TIMER0_BASE,
+ SP804_TIMER0_CLKMULT, SP804_TIMER0_CLKDIV);
+
+#if RESET_TO_BL31
+ /* There are no parameters from BL2 if BL31 is a reset vector */
+ assert(from_bl2 == NULL);
+ assert(plat_params_from_bl2 == NULL);
+
+# ifdef BL32_BASE
+ /* Populate entry point information for BL32 */
+ SET_PARAM_HEAD(&bl32_image_ep_info,
+ PARAM_EP,
+ VERSION_1,
+ 0);
+ SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+ bl32_image_ep_info.pc = BL32_BASE;
+ bl32_image_ep_info.spsr = brcm_get_spsr_for_bl32_entry();
+# endif /* BL32_BASE */
+
+ /* Populate entry point information for BL33 */
+ SET_PARAM_HEAD(&bl33_image_ep_info,
+ PARAM_EP,
+ VERSION_1,
+ 0);
+ /*
+ * Tell BL31 where the non-trusted software image
+ * is located and the entry state information
+ */
+ bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
+
+ bl33_image_ep_info.spsr = brcm_get_spsr_for_bl33_entry();
+ SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+# if ARM_LINUX_KERNEL_AS_BL33
+ /*
+ * According to the file ``Documentation/arm64/booting.txt`` of the
+ * Linux kernel tree, Linux expects the physical address of the device
+ * tree blob (DTB) in x0, while x1-x3 are reserved for future use and
+ * must be 0.
+ */
+ bl33_image_ep_info.args.arg0 = (u_register_t)PRELOADED_DTB_BASE;
+ bl33_image_ep_info.args.arg1 = 0U;
+ bl33_image_ep_info.args.arg2 = 0U;
+ bl33_image_ep_info.args.arg3 = 0U;
+# endif
+
+#else /* RESET_TO_BL31 */
+
+ /*
+ * In debug builds, we pass a special value in 'plat_params_from_bl2'
+ * to verify platform parameters from BL2 to BL31.
+ * In release builds, it's not used.
+ */
+ assert(((unsigned long long)plat_params_from_bl2) ==
+ BRCM_BL31_PLAT_PARAM_VAL);
+
+ /*
+ * Check params passed from BL2 should not be NULL
+ */
+ bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
+ assert(params_from_bl2 != NULL);
+ assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+ assert(params_from_bl2->h.version >= VERSION_2);
+
+ bl_params_node_t *bl_params = params_from_bl2->head;
+
+ /*
+ * Copy BL33 and BL32 (if present), entry point information.
+ * They are stored in Secure RAM, in BL2's address space.
+ */
+ while (bl_params != NULL) {
+ if (bl_params->image_id == BL32_IMAGE_ID &&
+ bl_params->image_info->h.attr != IMAGE_ATTRIB_SKIP_LOADING)
+ bl32_image_ep_info = *bl_params->ep_info;
+
+ if (bl_params->image_id == BL33_IMAGE_ID)
+ bl33_image_ep_info = *bl_params->ep_info;
+
+ bl_params = bl_params->next_params_info;
+ }
+
+ if (bl33_image_ep_info.pc == 0U)
+ panic();
+#endif /* RESET_TO_BL31 */
+
+#ifdef BL33_SHARED_DDR_BASE
+ /* Pass information to BL33 thorugh x0 */
+ bl33_image_ep_info.args.arg0 = (u_register_t)BL33_SHARED_DDR_BASE;
+ bl33_image_ep_info.args.arg1 = 0ULL;
+ bl33_image_ep_info.args.arg2 = 0ULL;
+ bl33_image_ep_info.args.arg3 = 0ULL;
+#endif
+}
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+{
+#ifdef BL31_LOG_LEVEL
+ SET_LOG_LEVEL(BL31_LOG_LEVEL);
+#endif
+
+ brcm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
+
+ plat_bcm_bl31_early_platform_setup((void *)arg0, (void *)arg3);
+
+#ifdef DRIVER_CC_ENABLE
+ /*
+ * Initialize Interconnect for this cluster during cold boot.
+ * No need for locks as no other CPU is active.
+ */
+ plat_brcm_interconnect_init();
+
+ /*
+ * Enable Interconnect coherency for the primary CPU's cluster.
+ * Earlier bootloader stages might already do this (e.g. Trusted
+ * Firmware's BL1 does it) but we can't assume so. There is no harm in
+ * executing this code twice anyway.
+ * Platform specific PSCI code will enable coherency for other
+ * clusters.
+ */
+ plat_brcm_interconnect_enter_coherency();
+#endif
+}
+
+/*******************************************************************************
+ * Perform any BL31 platform setup common to ARM standard platforms
+ ******************************************************************************/
+void brcm_bl31_platform_setup(void)
+{
+ /* Initialize the GIC driver, cpu and distributor interfaces */
+ plat_brcm_gic_driver_init();
+ plat_brcm_gic_init();
+
+ /* Initialize power controller before setting up topology */
+ plat_brcm_pwrc_setup();
+}
+
+/*******************************************************************************
+ * Perform any BL31 platform runtime setup prior to BL31 exit common to ARM
+ * standard platforms
+ * Perform BL31 platform setup
+ ******************************************************************************/
+void brcm_bl31_plat_runtime_setup(void)
+{
+ console_switch_state(CONSOLE_FLAG_RUNTIME);
+
+ /* Initialize the runtime console */
+ bcm_console_runtime_init();
+}
+
+void bl31_platform_setup(void)
+{
+ brcm_bl31_platform_setup();
+
+ /* Initialize the secure environment */
+ plat_brcm_security_setup();
+}
+
+void bl31_plat_runtime_setup(void)
+{
+ brcm_bl31_plat_runtime_setup();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup shared between
+ * ARM standard platforms. This only does basic initialization. Later
+ * architectural setup (bl31_arch_setup()) does not do anything platform
+ * specific.
+ ******************************************************************************/
+void __init brcm_bl31_plat_arch_setup(void)
+{
+#ifndef MMU_DISABLED
+ const mmap_region_t bl_regions[] = {
+ MAP_REGION_FLAT(BL31_BASE, BL31_END - BL31_BASE,
+ MT_MEMORY | MT_RW | MT_SECURE),
+ MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE,
+ MT_CODE | MT_SECURE),
+ MAP_REGION_FLAT(BL_RO_DATA_BASE,
+ BL_RO_DATA_END - BL_RO_DATA_BASE,
+ MT_RO_DATA | MT_SECURE),
+#if USE_COHERENT_MEM
+ MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
+ BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
+ MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+ {0}
+ };
+
+ setup_page_tables(bl_regions, plat_brcm_get_mmap());
+
+ enable_mmu_el3(0);
+#endif
+}
+
+void __init bl31_plat_arch_setup(void)
+{
+ brcm_bl31_plat_arch_setup();
+}
diff --git a/plat/brcm/common/brcm_ccn.c b/plat/brcm/common/brcm_ccn.c
new file mode 100644
index 0000000..9396aaa
--- /dev/null
+++ b/plat/brcm/common/brcm_ccn.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <drivers/arm/ccn.h>
+
+#include <platform_def.h>
+
+static const unsigned char master_to_rn_id_map[] = {
+ PLAT_BRCM_CLUSTER_TO_CCN_ID_MAP
+};
+
+static const ccn_desc_t bcm_ccn_desc = {
+ .periphbase = PLAT_BRCM_CCN_BASE,
+ .num_masters = ARRAY_SIZE(master_to_rn_id_map),
+ .master_to_rn_id_map = master_to_rn_id_map
+};
+
+void plat_brcm_interconnect_init(void)
+{
+ ccn_init(&bcm_ccn_desc);
+}
+
+void plat_brcm_interconnect_enter_coherency(void)
+{
+ ccn_enter_snoop_dvm_domain(1 << MPIDR_AFFLVL1_VAL(read_mpidr_el1()));
+}
+
+void plat_brcm_interconnect_exit_coherency(void)
+{
+ ccn_exit_snoop_dvm_domain(1 << MPIDR_AFFLVL1_VAL(read_mpidr_el1()));
+}
diff --git a/plat/brcm/common/brcm_common.c b/plat/brcm/common/brcm_common.c
new file mode 100644
index 0000000..f23719d
--- /dev/null
+++ b/plat/brcm/common/brcm_common.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <plat/common/platform.h>
+
+#include <plat_brcm.h>
+#include <platform_def.h>
+
+/* Weak definitions may be overridden in specific BRCM platform */
+#pragma weak plat_get_ns_image_entrypoint
+#pragma weak plat_brcm_get_mmap
+
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+#ifdef PRELOADED_BL33_BASE
+ return PRELOADED_BL33_BASE;
+#else
+ return PLAT_BRCM_NS_IMAGE_OFFSET;
+#endif
+}
+
+uint32_t brcm_get_spsr_for_bl32_entry(void)
+{
+ /*
+ * The Secure Payload Dispatcher service is responsible for
+ * setting the SPSR prior to entry into the BL32 image.
+ */
+ return 0;
+}
+
+uint32_t brcm_get_spsr_for_bl33_entry(void)
+{
+ unsigned int mode;
+ uint32_t spsr;
+
+ /* Figure out what mode we enter the non-secure world in */
+ mode = el_implemented(2) ? MODE_EL2 : MODE_EL1;
+
+ /*
+ * TODO: Consider the possibility of specifying the SPSR in
+ * the FIP ToC and allowing the platform to have a say as
+ * well.
+ */
+ spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+ return spsr;
+}
+
+const mmap_region_t *plat_brcm_get_mmap(void)
+{
+ return plat_brcm_mmap;
+}
diff --git a/plat/brcm/common/brcm_gicv3.c b/plat/brcm/common/brcm_gicv3.c
new file mode 100644
index 0000000..c4137c0
--- /dev/null
+++ b/plat/brcm/common/brcm_gicv3.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <drivers/arm/gicv3.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+/* The GICv3 driver only needs to be initialized in EL3 */
+static uintptr_t brcm_rdistif_base_addrs[PLATFORM_CORE_COUNT];
+
+static const interrupt_prop_t brcm_interrupt_props[] = {
+ /* G1S interrupts */
+ PLAT_BRCM_G1S_IRQ_PROPS(INTR_GROUP1S),
+ /* G0 interrupts */
+ PLAT_BRCM_G0_IRQ_PROPS(INTR_GROUP0)
+};
+
+/*
+ * MPIDR hashing function for translating MPIDRs read from GICR_TYPER register
+ * to core position.
+ *
+ * Calculating core position is dependent on MPIDR_EL1.MT bit. However, affinity
+ * values read from GICR_TYPER don't have an MT field. To reuse the same
+ * translation used for CPUs, we insert MT bit read from the PE's MPIDR into
+ * that read from GICR_TYPER.
+ *
+ * Assumptions:
+ *
+ * - All CPUs implemented in the system have MPIDR_EL1.MT bit set;
+ * - No CPUs implemented in the system use affinity level 3.
+ */
+static unsigned int brcm_gicv3_mpidr_hash(u_register_t mpidr)
+{
+ mpidr |= (read_mpidr_el1() & MPIDR_MT_MASK);
+ return plat_core_pos_by_mpidr(mpidr);
+}
+
+static const gicv3_driver_data_t brcm_gic_data = {
+ .gicd_base = PLAT_BRCM_GICD_BASE,
+ .gicr_base = PLAT_BRCM_GICR_BASE,
+ .interrupt_props = brcm_interrupt_props,
+ .interrupt_props_num = ARRAY_SIZE(brcm_interrupt_props),
+ .rdistif_num = PLATFORM_CORE_COUNT,
+ .rdistif_base_addrs = brcm_rdistif_base_addrs,
+ .mpidr_to_core_pos = brcm_gicv3_mpidr_hash
+};
+
+void plat_brcm_gic_driver_init(void)
+{
+ /* TODO Check if this is required to be initialized here
+ * after getting initialized in EL3, should we re-init this here
+ * in S-EL1
+ */
+ gicv3_driver_init(&brcm_gic_data);
+}
+
+void plat_brcm_gic_init(void)
+{
+ gicv3_distif_init();
+ gicv3_rdistif_init(plat_my_core_pos());
+ gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+void plat_brcm_gic_cpuif_enable(void)
+{
+ gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+void plat_brcm_gic_cpuif_disable(void)
+{
+ gicv3_cpuif_disable(plat_my_core_pos());
+}
+
+void plat_brcm_gic_pcpu_init(void)
+{
+ gicv3_rdistif_init(plat_my_core_pos());
+}
+
+void plat_brcm_gic_redistif_on(void)
+{
+ gicv3_rdistif_on(plat_my_core_pos());
+}
+
+void plat_brcm_gic_redistif_off(void)
+{
+ gicv3_rdistif_off(plat_my_core_pos());
+}
diff --git a/plat/brcm/common/brcm_image_load.c b/plat/brcm/common/brcm_image_load.c
new file mode 100644
index 0000000..ba02bda
--- /dev/null
+++ b/plat/brcm/common/brcm_image_load.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/bl_common.h>
+#include <common/desc_image_load.h>
+#include <plat/common/platform.h>
+
+#pragma weak plat_flush_next_bl_params
+#pragma weak plat_get_bl_image_load_info
+#pragma weak plat_get_next_bl_params
+
+/*******************************************************************************
+ * This function flushes the data structures so that they are visible
+ * in memory for the next BL image.
+ ******************************************************************************/
+void plat_flush_next_bl_params(void)
+{
+ flush_bl_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of loadable images.
+ ******************************************************************************/
+struct bl_load_info *plat_get_bl_image_load_info(void)
+{
+ return get_bl_load_info_from_mem_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images.
+ ******************************************************************************/
+struct bl_params *plat_get_next_bl_params(void)
+{
+ bl_params_t *next_bl_params = get_next_bl_params_from_mem_params_desc();
+
+ populate_next_bl_params_config(next_bl_params);
+ return next_bl_params;
+}
diff --git a/plat/brcm/common/brcm_io_storage.c b/plat/brcm/common/brcm_io_storage.c
new file mode 100644
index 0000000..66ec292
--- /dev/null
+++ b/plat/brcm/common/brcm_io_storage.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <common/debug.h>
+#include <drivers/io/io_driver.h>
+#include <drivers/io/io_fip.h>
+#include <drivers/io/io_memmap.h>
+#include <drivers/io/io_storage.h>
+#include <tools_share/firmware_image_package.h>
+
+#include <cmn_plat_def.h>
+#include <cmn_plat_util.h>
+#include <plat_brcm.h>
+#include <platform_def.h>
+
+/* IO devices */
+static const io_dev_connector_t *fip_dev_con;
+static uintptr_t fip_dev_handle;
+static const io_dev_connector_t *memmap_dev_con;
+static uintptr_t memmap_dev_handle;
+
+static const io_block_spec_t fip_block_spec = {
+ .offset = PLAT_BRCM_FIP_BASE,
+ .length = PLAT_BRCM_FIP_MAX_SIZE
+};
+
+static const io_block_spec_t qspi_fip_block_spec = {
+ .offset = PLAT_BRCM_FIP_QSPI_BASE,
+ .length = PLAT_BRCM_FIP_MAX_SIZE
+};
+
+static const io_block_spec_t nand_fip_block_spec = {
+ .offset = PLAT_BRCM_FIP_NAND_BASE,
+ .length = PLAT_BRCM_FIP_MAX_SIZE
+};
+
+static const io_uuid_spec_t bl2_uuid_spec = {
+ .uuid = UUID_TRUSTED_BOOT_FIRMWARE_BL2,
+};
+
+static const io_uuid_spec_t scp_bl2_uuid_spec = {
+ .uuid = UUID_SCP_FIRMWARE_SCP_BL2,
+};
+
+static const io_uuid_spec_t bl31_uuid_spec = {
+ .uuid = UUID_EL3_RUNTIME_FIRMWARE_BL31,
+};
+
+static const io_uuid_spec_t bl32_uuid_spec = {
+ .uuid = UUID_SECURE_PAYLOAD_BL32,
+};
+
+static const io_uuid_spec_t bl32_extra1_uuid_spec = {
+ .uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA1,
+};
+
+static const io_uuid_spec_t bl32_extra2_uuid_spec = {
+ .uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA2,
+};
+
+static const io_uuid_spec_t bl33_uuid_spec = {
+ .uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
+};
+
+static const io_uuid_spec_t tb_fw_config_uuid_spec = {
+ .uuid = UUID_TB_FW_CONFIG,
+};
+
+static const io_uuid_spec_t hw_config_uuid_spec = {
+ .uuid = UUID_HW_CONFIG,
+};
+
+static const io_uuid_spec_t soc_fw_config_uuid_spec = {
+ .uuid = UUID_SOC_FW_CONFIG,
+};
+
+static const io_uuid_spec_t tos_fw_config_uuid_spec = {
+ .uuid = UUID_TOS_FW_CONFIG,
+};
+
+static const io_uuid_spec_t nt_fw_config_uuid_spec = {
+ .uuid = UUID_NT_FW_CONFIG,
+};
+
+#if TRUSTED_BOARD_BOOT
+static const io_uuid_spec_t tb_fw_cert_uuid_spec = {
+ .uuid = UUID_TRUSTED_BOOT_FW_CERT,
+};
+
+static const io_uuid_spec_t trusted_key_cert_uuid_spec = {
+ .uuid = UUID_TRUSTED_KEY_CERT,
+};
+
+static const io_uuid_spec_t scp_fw_key_cert_uuid_spec = {
+ .uuid = UUID_SCP_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t soc_fw_key_cert_uuid_spec = {
+ .uuid = UUID_SOC_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t tos_fw_key_cert_uuid_spec = {
+ .uuid = UUID_TRUSTED_OS_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t nt_fw_key_cert_uuid_spec = {
+ .uuid = UUID_NON_TRUSTED_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t scp_fw_cert_uuid_spec = {
+ .uuid = UUID_SCP_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t soc_fw_cert_uuid_spec = {
+ .uuid = UUID_SOC_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t tos_fw_cert_uuid_spec = {
+ .uuid = UUID_TRUSTED_OS_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t nt_fw_cert_uuid_spec = {
+ .uuid = UUID_NON_TRUSTED_FW_CONTENT_CERT,
+};
+#endif /* TRUSTED_BOARD_BOOT */
+
+static int open_fip(const uintptr_t spec);
+static int open_memmap(const uintptr_t spec);
+static int open_qspi(const uintptr_t spec);
+static int open_nand(const uintptr_t spec);
+
+struct plat_io_policy {
+ uintptr_t *dev_handle;
+ uintptr_t image_spec;
+ int (*check)(const uintptr_t spec);
+};
+
+/* By default, BRCM platforms load images from the FIP */
+static const struct plat_io_policy policies[] = {
+ [FIP_IMAGE_ID] = {
+ &memmap_dev_handle,
+ (uintptr_t)&fip_block_spec,
+ open_memmap
+ },
+ [BL2_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl2_uuid_spec,
+ open_fip
+ },
+ [SCP_BL2_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&scp_bl2_uuid_spec,
+ open_fip
+ },
+ [BL31_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl31_uuid_spec,
+ open_fip
+ },
+ [BL32_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl32_uuid_spec,
+ open_fip
+ },
+ [BL32_EXTRA1_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl32_extra1_uuid_spec,
+ open_fip
+ },
+ [BL32_EXTRA2_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl32_extra2_uuid_spec,
+ open_fip
+ },
+ [BL33_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl33_uuid_spec,
+ open_fip
+ },
+ [TB_FW_CONFIG_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&tb_fw_config_uuid_spec,
+ open_fip
+ },
+ [HW_CONFIG_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&hw_config_uuid_spec,
+ open_fip
+ },
+ [SOC_FW_CONFIG_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&soc_fw_config_uuid_spec,
+ open_fip
+ },
+ [TOS_FW_CONFIG_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&tos_fw_config_uuid_spec,
+ open_fip
+ },
+ [NT_FW_CONFIG_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&nt_fw_config_uuid_spec,
+ open_fip
+ },
+#if TRUSTED_BOARD_BOOT
+ [TRUSTED_BOOT_FW_CERT_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&tb_fw_cert_uuid_spec,
+ open_fip
+ },
+ [TRUSTED_KEY_CERT_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&trusted_key_cert_uuid_spec,
+ open_fip
+ },
+ [SCP_FW_KEY_CERT_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&scp_fw_key_cert_uuid_spec,
+ open_fip
+ },
+ [SOC_FW_KEY_CERT_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&soc_fw_key_cert_uuid_spec,
+ open_fip
+ },
+ [TRUSTED_OS_FW_KEY_CERT_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&tos_fw_key_cert_uuid_spec,
+ open_fip
+ },
+ [NON_TRUSTED_FW_KEY_CERT_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&nt_fw_key_cert_uuid_spec,
+ open_fip
+ },
+ [SCP_FW_CONTENT_CERT_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&scp_fw_cert_uuid_spec,
+ open_fip
+ },
+ [SOC_FW_CONTENT_CERT_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&soc_fw_cert_uuid_spec,
+ open_fip
+ },
+ [TRUSTED_OS_FW_CONTENT_CERT_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&tos_fw_cert_uuid_spec,
+ open_fip
+ },
+ [NON_TRUSTED_FW_CONTENT_CERT_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&nt_fw_cert_uuid_spec,
+ open_fip
+ },
+#endif /* TRUSTED_BOARD_BOOT */
+};
+
+/* By default, BRCM platforms load images from the FIP */
+static const struct plat_io_policy boot_source_policies[] = {
+ [BOOT_SOURCE_QSPI] = {
+ &memmap_dev_handle,
+ (uintptr_t)&qspi_fip_block_spec,
+ open_qspi
+ },
+ [BOOT_SOURCE_NAND] = {
+ &memmap_dev_handle,
+ (uintptr_t)&nand_fip_block_spec,
+ open_nand
+ },
+};
+
+/* Weak definitions may be overridden in specific brcm platform */
+#pragma weak plat_brcm_io_setup
+#pragma weak plat_brcm_process_flags
+
+static int open_fip(const uintptr_t spec)
+{
+ int result;
+ uintptr_t local_image_handle;
+
+ /* See if a Firmware Image Package is available */
+ result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID);
+ if (result == 0) {
+ result = io_open(fip_dev_handle, spec, &local_image_handle);
+ if (result == 0) {
+ VERBOSE("Using FIP\n");
+ io_close(local_image_handle);
+ }
+ }
+ return result;
+}
+
+
+static int open_memmap(const uintptr_t spec)
+{
+ int result;
+ uintptr_t local_image_handle;
+
+ result = io_dev_init(memmap_dev_handle, (uintptr_t)NULL);
+ if (result == 0) {
+ result = io_open(memmap_dev_handle, spec, &local_image_handle);
+ if (result == 0) {
+ VERBOSE("Using Memmap\n");
+ io_close(local_image_handle);
+ }
+ }
+ return result;
+}
+
+static int open_qspi(const uintptr_t spec)
+{
+ return open_memmap(spec);
+}
+
+static int open_nand(const uintptr_t spec)
+{
+ return open_memmap(spec);
+}
+
+
+void brcm_io_setup(void)
+{
+ int io_result;
+ uint32_t boot_source;
+
+ io_result = register_io_dev_fip(&fip_dev_con);
+ assert(io_result == 0);
+
+ io_result = register_io_dev_memmap(&memmap_dev_con);
+ assert(io_result == 0);
+
+ /* Open connections to devices and cache the handles */
+ io_result = io_dev_open(fip_dev_con, (uintptr_t)NULL,
+ &fip_dev_handle);
+ assert(io_result == 0);
+
+ boot_source = boot_source_get();
+ switch (boot_source) {
+ case BOOT_SOURCE_QSPI:
+ case BOOT_SOURCE_NAND:
+ default:
+ io_result = io_dev_open(memmap_dev_con, (uintptr_t)NULL,
+ &memmap_dev_handle);
+ break;
+ }
+ assert(io_result == 0);
+
+ /* Ignore improbable errors in release builds */
+ (void)io_result;
+}
+
+void plat_brcm_io_setup(void)
+{
+ brcm_io_setup();
+}
+
+void plat_brcm_process_flags(uint16_t plat_toc_flags __unused)
+{
+ WARN("%s not implemented\n", __func__);
+}
+
+/*
+ * Return an IO device handle and specification which can be used to access
+ * an image. Use this to enforce platform load policy
+ */
+int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
+ uintptr_t *image_spec)
+{
+ int result;
+ const struct plat_io_policy *policy;
+ uint32_t boot_source;
+ uint16_t lcl_plat_toc_flg;
+
+ assert(image_id < ARRAY_SIZE(policies));
+
+ boot_source = boot_source_get();
+ if (image_id == FIP_IMAGE_ID)
+ policy = &boot_source_policies[boot_source];
+ else
+ policy = &policies[image_id];
+
+ result = policy->check(policy->image_spec);
+ if (result == 0) {
+ *image_spec = policy->image_spec;
+ *dev_handle = *(policy->dev_handle);
+
+ if (image_id == TRUSTED_BOOT_FW_CERT_ID) {
+ /*
+ * Process the header flags to perform
+ * such custom actions as speeding up PLL.
+ * CERT seems to be the first image accessed
+ * by BL1 so this is where we process the flags.
+ */
+ fip_dev_get_plat_toc_flag((io_dev_info_t *)fip_dev_handle,
+ &lcl_plat_toc_flg);
+ plat_brcm_process_flags(lcl_plat_toc_flg);
+ }
+ }
+
+ return result;
+}
diff --git a/plat/brcm/common/brcm_mhu.c b/plat/brcm/common/brcm_mhu.c
new file mode 100644
index 0000000..56f44e0
--- /dev/null
+++ b/plat/brcm/common/brcm_mhu.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch_helpers.h>
+#include <drivers/delay_timer.h>
+#include <lib/bakery_lock.h>
+
+#include <brcm_mhu.h>
+#include <platform_def.h>
+
+#include "m0_ipc.h"
+
+#define PLAT_MHU_INTR_REG AP_TO_SCP_MAILBOX1
+
+/* SCP MHU secure channel registers */
+#define SCP_INTR_S_STAT CRMU_IHOST_SW_PERSISTENT_REG11
+#define SCP_INTR_S_SET CRMU_IHOST_SW_PERSISTENT_REG11
+#define SCP_INTR_S_CLEAR CRMU_IHOST_SW_PERSISTENT_REG11
+
+/* CPU MHU secure channel registers */
+#define CPU_INTR_S_STAT CRMU_IHOST_SW_PERSISTENT_REG10
+#define CPU_INTR_S_SET CRMU_IHOST_SW_PERSISTENT_REG10
+#define CPU_INTR_S_CLEAR CRMU_IHOST_SW_PERSISTENT_REG10
+
+static DEFINE_BAKERY_LOCK(bcm_lock);
+
+/*
+ * Slot 31 is reserved because the MHU hardware uses this register bit to
+ * indicate a non-secure access attempt. The total number of available slots is
+ * therefore 31 [30:0].
+ */
+#define MHU_MAX_SLOT_ID 30
+
+void mhu_secure_message_start(unsigned int slot_id)
+{
+ int iter = 1000000;
+
+ assert(slot_id <= MHU_MAX_SLOT_ID);
+
+ bakery_lock_get(&bcm_lock);
+ /* Make sure any previous command has finished */
+ do {
+ if (!(mmio_read_32(PLAT_BRCM_MHU_BASE + CPU_INTR_S_STAT) &
+ (1 << slot_id)))
+ break;
+
+ udelay(1);
+
+ } while (--iter);
+
+ assert(iter != 0);
+}
+
+void mhu_secure_message_send(unsigned int slot_id)
+{
+ uint32_t response, iter = 1000000;
+
+ assert(slot_id <= MHU_MAX_SLOT_ID);
+ assert(!(mmio_read_32(PLAT_BRCM_MHU_BASE + CPU_INTR_S_STAT) &
+ (1 << slot_id)));
+
+ /* Send command to SCP */
+ mmio_setbits_32(PLAT_BRCM_MHU_BASE + CPU_INTR_S_SET, 1 << slot_id);
+ mmio_write_32(CRMU_MAIL_BOX0, MCU_IPC_MCU_CMD_SCPI);
+ mmio_write_32(PLAT_BRCM_MHU_BASE + PLAT_MHU_INTR_REG, 0x1);
+
+ /* Wait until IPC transport acknowledges reception of SCP command */
+ do {
+ response = mmio_read_32(CRMU_MAIL_BOX0);
+ if ((response & ~MCU_IPC_CMD_REPLY_MASK) ==
+ (MCU_IPC_CMD_DONE_MASK | MCU_IPC_MCU_CMD_SCPI))
+ break;
+
+ udelay(1);
+
+ } while (--iter);
+
+ assert(iter != 0);
+}
+
+uint32_t mhu_secure_message_wait(void)
+{
+ /* Wait for response from SCP */
+ uint32_t response, iter = 1000000;
+
+ do {
+ response = mmio_read_32(PLAT_BRCM_MHU_BASE + SCP_INTR_S_STAT);
+ if (!response)
+ break;
+
+ udelay(1);
+ } while (--iter);
+ assert(iter != 0);
+
+ return response;
+}
+
+void mhu_secure_message_end(unsigned int slot_id)
+{
+ assert(slot_id <= MHU_MAX_SLOT_ID);
+
+ /*
+ * Clear any response we got by writing one in the relevant slot bit to
+ * the CLEAR register
+ */
+ mmio_clrbits_32(PLAT_BRCM_MHU_BASE + SCP_INTR_S_CLEAR, 1 << slot_id);
+ bakery_lock_release(&bcm_lock);
+}
+
+void mhu_secure_init(void)
+{
+ bakery_lock_init(&bcm_lock);
+
+ /*
+ * The STAT register resets to zero. Ensure it is in the expected state,
+ * as a stale or garbage value would make us think it's a message we've
+ * already sent.
+ */
+ mmio_write_32(PLAT_BRCM_MHU_BASE + CPU_INTR_S_STAT, 0);
+ mmio_write_32(PLAT_BRCM_MHU_BASE + SCP_INTR_S_STAT, 0);
+}
+
+void plat_brcm_pwrc_setup(void)
+{
+ mhu_secure_init();
+}
diff --git a/plat/brcm/common/brcm_mhu.h b/plat/brcm/common/brcm_mhu.h
new file mode 100644
index 0000000..6c89a34
--- /dev/null
+++ b/plat/brcm/common/brcm_mhu.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BRCM_MHU_H
+#define BRCM_MHU_H
+
+#include <stdint.h>
+
+void mhu_secure_message_start(unsigned int slot_id);
+void mhu_secure_message_send(unsigned int slot_id);
+uint32_t mhu_secure_message_wait(void);
+void mhu_secure_message_end(unsigned int slot_id);
+
+void mhu_secure_init(void);
+
+#endif /* BRCM_MHU_H */
diff --git a/plat/brcm/common/brcm_scpi.c b/plat/brcm/common/brcm_scpi.c
new file mode 100644
index 0000000..0a703cb
--- /dev/null
+++ b/plat/brcm/common/brcm_scpi.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/utils.h>
+#include <plat/common/platform.h>
+
+#include <brcm_mhu.h>
+#include <brcm_scpi.h>
+#include <platform_def.h>
+
+#define SCPI_SHARED_MEM_SCP_TO_AP (PLAT_SCP_COM_SHARED_MEM_BASE)
+#define SCPI_SHARED_MEM_AP_TO_SCP (PLAT_SCP_COM_SHARED_MEM_BASE \
+ + 0x100)
+
+/* Header and payload addresses for commands from AP to SCP */
+#define SCPI_CMD_HEADER_AP_TO_SCP \
+ ((scpi_cmd_t *) SCPI_SHARED_MEM_AP_TO_SCP)
+#define SCPI_CMD_PAYLOAD_AP_TO_SCP \
+ ((void *) (SCPI_SHARED_MEM_AP_TO_SCP + sizeof(scpi_cmd_t)))
+
+/* Header and payload addresses for responses from SCP to AP */
+#define SCPI_RES_HEADER_SCP_TO_AP \
+ ((scpi_cmd_t *) SCPI_SHARED_MEM_SCP_TO_AP)
+#define SCPI_RES_PAYLOAD_SCP_TO_AP \
+ ((void *) (SCPI_SHARED_MEM_SCP_TO_AP + sizeof(scpi_cmd_t)))
+
+/* ID of the MHU slot used for the SCPI protocol */
+#define SCPI_MHU_SLOT_ID 0
+
+static void scpi_secure_message_start(void)
+{
+ mhu_secure_message_start(SCPI_MHU_SLOT_ID);
+}
+
+static void scpi_secure_message_send(size_t payload_size)
+{
+ /*
+ * Ensure that any write to the SCPI payload area is seen by SCP before
+ * we write to the MHU register. If these 2 writes were reordered by
+ * the CPU then SCP would read stale payload data
+ */
+ dmbst();
+
+ mhu_secure_message_send(SCPI_MHU_SLOT_ID);
+}
+
+static void scpi_secure_message_receive(scpi_cmd_t *cmd)
+{
+ uint32_t mhu_status;
+
+ assert(cmd != NULL);
+
+ mhu_status = mhu_secure_message_wait();
+
+ /* Expect an SCPI message, reject any other protocol */
+ if (mhu_status != (1 << SCPI_MHU_SLOT_ID)) {
+ ERROR("MHU: Unexpected protocol (MHU status: 0x%x)\n",
+ mhu_status);
+ panic();
+ }
+
+ /*
+ * Ensure that any read to the SCPI payload area is done after reading
+ * the MHU register. If these 2 reads were reordered then the CPU would
+ * read invalid payload data
+ */
+ dmbld();
+
+ memcpy(cmd, (void *) SCPI_SHARED_MEM_SCP_TO_AP, sizeof(*cmd));
+}
+
+static void scpi_secure_message_end(void)
+{
+ mhu_secure_message_end(SCPI_MHU_SLOT_ID);
+}
+
+int scpi_wait_ready(void)
+{
+ scpi_cmd_t scpi_cmd;
+
+ VERBOSE("Waiting for SCP_READY command...\n");
+
+ /* Get a message from the SCP */
+ scpi_secure_message_start();
+ scpi_secure_message_receive(&scpi_cmd);
+ scpi_secure_message_end();
+
+ /* We are expecting 'SCP Ready', produce correct error if it's not */
+ scpi_status_t status = SCP_OK;
+
+ if (scpi_cmd.id != SCPI_CMD_SCP_READY) {
+ ERROR("Unexpected SCP command: expected #%u, received #%u\n",
+ SCPI_CMD_SCP_READY, scpi_cmd.id);
+ status = SCP_E_SUPPORT;
+ } else if (scpi_cmd.size != 0) {
+ ERROR("SCP_READY cmd has incorrect size: expected 0, got %u\n",
+ scpi_cmd.size);
+ status = SCP_E_SIZE;
+ }
+
+ VERBOSE("Sending response for SCP_READY command\n");
+
+ /*
+ * Send our response back to SCP.
+ * We are using the same SCPI header, just update the status field.
+ */
+ scpi_cmd.status = status;
+ scpi_secure_message_start();
+ memcpy((void *) SCPI_SHARED_MEM_AP_TO_SCP, &scpi_cmd, sizeof(scpi_cmd));
+ scpi_secure_message_send(0);
+ scpi_secure_message_end();
+
+ return status == SCP_OK ? 0 : -1;
+}
+
+void scpi_set_brcm_power_state(unsigned int mpidr,
+ scpi_power_state_t cpu_state, scpi_power_state_t cluster_state,
+ scpi_power_state_t brcm_state)
+{
+ scpi_cmd_t *cmd;
+ uint32_t state = 0;
+ uint32_t *payload_addr;
+
+#if ARM_PLAT_MT
+ /*
+ * The current SCPI driver only caters for single-threaded platforms.
+ * Hence we ignore the thread ID (which is always 0) for such platforms.
+ */
+ state |= (mpidr >> MPIDR_AFF1_SHIFT) & 0x0f; /* CPU ID */
+ state |= ((mpidr >> MPIDR_AFF2_SHIFT) & 0x0f) << 4; /* Cluster ID */
+#else
+ state |= mpidr & 0x0f; /* CPU ID */
+ state |= (mpidr & 0xf00) >> 4; /* Cluster ID */
+#endif /* ARM_PLAT_MT */
+
+ state |= cpu_state << 8;
+ state |= cluster_state << 12;
+ state |= brcm_state << 16;
+
+ scpi_secure_message_start();
+
+ /* Populate the command header */
+ cmd = SCPI_CMD_HEADER_AP_TO_SCP;
+ cmd->id = SCPI_CMD_SET_POWER_STATE;
+ cmd->set = SCPI_SET_NORMAL;
+ cmd->sender = 0;
+ cmd->size = sizeof(state);
+ /* Populate the command payload */
+ payload_addr = SCPI_CMD_PAYLOAD_AP_TO_SCP;
+ *payload_addr = state;
+ scpi_secure_message_send(sizeof(state));
+
+ /*
+ * SCP does not reply to this command in order to avoid MHU interrupts
+ * from the sender, which could interfere with its power state request.
+ */
+ scpi_secure_message_end();
+}
+
+/*
+ * Query and obtain power state from SCP.
+ *
+ * In response to the query, SCP returns power states of all CPUs in all
+ * clusters of the system. The returned response is then filtered based on the
+ * supplied MPIDR. Power states of requested cluster and CPUs within are updated
+ * via. supplied non-NULL pointer arguments.
+ *
+ * Returns 0 on success, or -1 on errors.
+ */
+int scpi_get_brcm_power_state(unsigned int mpidr, unsigned int *cpu_state_p,
+ unsigned int *cluster_state_p)
+{
+ scpi_cmd_t *cmd;
+ scpi_cmd_t response;
+ int power_state, cpu, cluster, rc = -1;
+
+ /*
+ * Extract CPU and cluster membership of the given MPIDR. SCPI caters
+ * for only up to 0xf clusters, and 8 CPUs per cluster
+ */
+ cpu = mpidr & MPIDR_AFFLVL_MASK;
+ cluster = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
+ if (cpu >= 8 || cluster >= 0xf)
+ return -1;
+
+ scpi_secure_message_start();
+
+ /* Populate request headers */
+ zeromem(SCPI_CMD_HEADER_AP_TO_SCP, sizeof(*cmd));
+ cmd = SCPI_CMD_HEADER_AP_TO_SCP;
+ cmd->id = SCPI_CMD_GET_POWER_STATE;
+
+ /*
+ * Send message and wait for SCP's response
+ */
+ scpi_secure_message_send(0);
+ scpi_secure_message_receive(&response);
+
+ if (response.status != SCP_OK)
+ goto exit;
+
+ /* Validate SCP response */
+ if (!CHECK_RESPONSE(response, cluster))
+ goto exit;
+
+ /* Extract power states for required cluster */
+ power_state = *(((uint16_t *) SCPI_RES_PAYLOAD_SCP_TO_AP) + cluster);
+ if (CLUSTER_ID(power_state) != cluster)
+ goto exit;
+
+ /* Update power state via. pointers */
+ if (cluster_state_p)
+ *cluster_state_p = CLUSTER_POWER_STATE(power_state);
+ if (cpu_state_p)
+ *cpu_state_p = CPU_POWER_STATE(power_state);
+ rc = 0;
+
+exit:
+ scpi_secure_message_end();
+ return rc;
+}
+
+uint32_t scpi_sys_power_state(scpi_system_state_t system_state)
+{
+ scpi_cmd_t *cmd;
+ uint8_t *payload_addr;
+
+ scpi_secure_message_start();
+
+ /* Populate the command header */
+ cmd = SCPI_CMD_HEADER_AP_TO_SCP;
+ cmd->id = SCPI_CMD_SYS_POWER_STATE;
+ cmd->set = 0;
+ cmd->sender = 0;
+ cmd->size = sizeof(*payload_addr);
+ /* Populate the command payload */
+ payload_addr = SCPI_CMD_PAYLOAD_AP_TO_SCP;
+ *payload_addr = system_state & 0xff;
+ scpi_secure_message_send(sizeof(*payload_addr));
+
+ scpi_secure_message_end();
+
+ return SCP_OK;
+}
diff --git a/plat/brcm/common/brcm_scpi.h b/plat/brcm/common/brcm_scpi.h
new file mode 100644
index 0000000..f3b658f
--- /dev/null
+++ b/plat/brcm/common/brcm_scpi.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BRCM_SCPI_H
+#define BRCM_SCPI_H
+
+#include <stddef.h>
+#include <stdint.h>
+
+/*
+ * An SCPI command consists of a header and a payload.
+ * The following structure describes the header. It is 64-bit long.
+ */
+typedef struct {
+ /* Command ID */
+ uint32_t id : 7;
+ /* Set ID. Identifies whether this is a standard or extended command. */
+ uint32_t set : 1;
+ /* Sender ID to match a reply. The value is sender specific. */
+ uint32_t sender : 8;
+ /* Size of the payload in bytes (0 - 511) */
+ uint32_t size : 9;
+ uint32_t reserved : 7;
+ /*
+ * Status indicating the success of a command.
+ * See the enum below.
+ */
+ uint32_t status;
+} scpi_cmd_t;
+
+typedef enum {
+ SCPI_SET_NORMAL = 0, /* Normal SCPI commands */
+ SCPI_SET_EXTENDED /* Extended SCPI commands */
+} scpi_set_t;
+
+enum {
+ SCP_OK = 0, /* Success */
+ SCP_E_PARAM, /* Invalid parameter(s) */
+ SCP_E_ALIGN, /* Invalid alignment */
+ SCP_E_SIZE, /* Invalid size */
+ SCP_E_HANDLER, /* Invalid handler or callback */
+ SCP_E_ACCESS, /* Invalid access or permission denied */
+ SCP_E_RANGE, /* Value out of range */
+ SCP_E_TIMEOUT, /* Time out has ocurred */
+ SCP_E_NOMEM, /* Invalid memory area or pointer */
+ SCP_E_PWRSTATE, /* Invalid power state */
+ SCP_E_SUPPORT, /* Feature not supported or disabled */
+ SCPI_E_DEVICE, /* Device error */
+ SCPI_E_BUSY, /* Device is busy */
+};
+
+typedef uint32_t scpi_status_t;
+typedef enum {
+ SCPI_CMD_SCP_READY = 0x01,
+ SCPI_CMD_SET_POWER_STATE = 0x03,
+ SCPI_CMD_GET_POWER_STATE = 0x04,
+ SCPI_CMD_SYS_POWER_STATE = 0x05
+} scpi_command_t;
+
+/*
+ * Macros to parse SCP response to GET_POWER_STATE command
+ *
+ * [3:0] : cluster ID
+ * [7:4] : cluster state: 0 = on; 3 = off; rest are reserved
+ * [15:8]: on/off state for individual CPUs in the cluster
+ *
+ * Payload is in little-endian
+ */
+#define CLUSTER_ID(_resp) ((_resp) & 0xf)
+#define CLUSTER_POWER_STATE(_resp) (((_resp) >> 4) & 0xf)
+
+/* Result is a bit mask of CPU on/off states in the cluster */
+#define CPU_POWER_STATE(_resp) (((_resp) >> 8) & 0xff)
+
+/*
+ * For GET_POWER_STATE, SCP returns the power states of every cluster. The
+ * size of response depends on the number of clusters in the system. The
+ * SCP-to-AP payload contains 2 bytes per cluster. Make sure the response is
+ * large enough to contain power states of a given cluster
+ */
+#define CHECK_RESPONSE(_resp, _clus) (_resp.size >= (((_clus) + 1) * 2))
+
+typedef enum {
+ scpi_power_on = 0,
+ scpi_power_retention = 1,
+ scpi_power_off = 3,
+} scpi_power_state_t;
+
+typedef enum {
+ scpi_system_shutdown = 0,
+ scpi_system_reboot = 1,
+ scpi_system_reset = 2
+} scpi_system_state_t;
+
+extern int scpi_wait_ready(void);
+extern void scpi_set_brcm_power_state(unsigned int mpidr,
+ scpi_power_state_t cpu_state,
+ scpi_power_state_t cluster_state,
+ scpi_power_state_t css_state);
+int scpi_get_brcm_power_state(unsigned int mpidr, unsigned int *cpu_state_p,
+ unsigned int *cluster_state_p);
+uint32_t scpi_sys_power_state(scpi_system_state_t system_state);
+
+#endif /* BRCM_SCPI_H */