diff options
Diffstat (limited to '')
| -rw-r--r-- | plat/hisilicon/poplar/bl2_plat_setup.c | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/plat/hisilicon/poplar/bl2_plat_setup.c b/plat/hisilicon/poplar/bl2_plat_setup.c new file mode 100644 index 0000000..ee46772 --- /dev/null +++ b/plat/hisilicon/poplar/bl2_plat_setup.c @@ -0,0 +1,219 @@ +/* + * Copyright (c) 2017-2021, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <assert.h> +#include <errno.h> +#include <string.h> + +#include <arch_helpers.h> +#include <common/bl_common.h> +#include <common/debug.h> +#include <common/desc_image_load.h> +#include <drivers/arm/pl011.h> +#include <drivers/generic_delay_timer.h> +#include <drivers/partition/partition.h> +#include <drivers/synopsys/dw_mmc.h> +#include <drivers/mmc.h> +#include <lib/mmio.h> +#include <lib/optee_utils.h> +#include <plat/common/platform.h> + +#include "hi3798cv200.h" +#include "plat_private.h" + +static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE); +static console_t console; +#if !POPLAR_RECOVERY +static struct mmc_device_info mmc_info; +#endif + +/******************************************************************************* + * Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol. + * Return 0 on success, -1 otherwise. + ******************************************************************************/ +int plat_poplar_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info) +{ + /* + * This platform has no SCP_BL2 yet + */ + return 0; +} + +/******************************************************************************* + * Gets SPSR for BL32 entry + ******************************************************************************/ +uint32_t poplar_get_spsr_for_bl32_entry(void) +{ + /* + * The Secure Payload Dispatcher service is responsible for + * setting the SPSR prior to entry into the BL3-2 image. + */ + return 0; +} + +/******************************************************************************* + * Gets SPSR for BL33 entry + ******************************************************************************/ +#ifdef __aarch64__ +uint32_t poplar_get_spsr_for_bl33_entry(void) +{ + unsigned long el_status; + unsigned int mode; + uint32_t spsr; + + /* Figure out what mode we enter the non-secure world in */ + el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; + el_status &= ID_AA64PFR0_ELX_MASK; + + mode = (el_status) ? MODE_EL2 : MODE_EL1; + + /* + * TODO: Consider the possibility of specifying the SPSR in + * the FIP ToC and allowing the platform to have a say as + * well. + */ + spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); + return spsr; +} +#else +uint32_t poplar_get_spsr_for_bl33_entry(void) +{ + unsigned int hyp_status, mode, spsr; + + hyp_status = GET_VIRT_EXT(read_id_pfr1()); + + mode = (hyp_status) ? MODE32_hyp : MODE32_svc; + + /* + * TODO: Consider the possibility of specifying the SPSR in + * the FIP ToC and allowing the platform to have a say as + * well. + */ + spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1, + SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS); + return spsr; +} +#endif /* __aarch64__ */ + +int poplar_bl2_handle_post_image_load(unsigned int image_id) +{ + int err = 0; + bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id); +#ifdef SPD_opteed + bl_mem_params_node_t *pager_mem_params = NULL; + bl_mem_params_node_t *paged_mem_params = NULL; +#endif + + assert(bl_mem_params); + + switch (image_id) { +#ifdef __aarch64__ + case BL32_IMAGE_ID: +#ifdef SPD_opteed + pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID); + assert(pager_mem_params); + + paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID); + assert(paged_mem_params); + + err = parse_optee_header(&bl_mem_params->ep_info, + &pager_mem_params->image_info, + &paged_mem_params->image_info); + if (err != 0) { + WARN("OPTEE header parse error.\n"); + } + + /* + * OP-TEE expect to receive DTB address in x2. + * This will be copied into x2 by dispatcher. + * Set this (arg3) if necessary + */ + /* bl_mem_params->ep_info.args.arg3 = PLAT_HIKEY_DT_BASE; */ +#endif + bl_mem_params->ep_info.spsr = poplar_get_spsr_for_bl32_entry(); + break; +#endif + + case BL33_IMAGE_ID: + /* BL33 expects to receive the primary CPU MPID (through r0) */ + bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr(); + bl_mem_params->ep_info.spsr = poplar_get_spsr_for_bl33_entry(); + break; + +#ifdef SCP_BL2_BASE + case SCP_BL2_IMAGE_ID: + /* The subsequent handling of SCP_BL2 is platform specific */ + err = plat_poplar_bl2_handle_scp_bl2(&bl_mem_params->image_info); + if (err) { + WARN("Failure in platform-specific handling of SCP_BL2 image.\n"); + } + break; +#endif + default: + /* Do nothing in default case */ + break; + } + + return err; +} + +/******************************************************************************* + * This function can be used by the platforms to update/use image + * information for given `image_id`. + ******************************************************************************/ +int bl2_plat_handle_post_image_load(unsigned int image_id) +{ + return poplar_bl2_handle_post_image_load(image_id); +} + +void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, + u_register_t arg2, u_register_t arg3) +{ + struct meminfo *mem_layout = (struct meminfo *)arg1; +#if !POPLAR_RECOVERY + dw_mmc_params_t params = EMMC_INIT_PARAMS(POPLAR_EMMC_DESC_BASE); +#endif + + console_pl011_register(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, + PL011_BAUDRATE, &console); + + /* Enable arch timer */ + generic_delay_timer_init(); + + bl2_tzram_layout = *mem_layout; + +#if !POPLAR_RECOVERY + /* SoC-specific emmc register are initialized/configured by bootrom */ + INFO("BL2: initializing emmc\n"); + mmc_info.mmc_dev_type = MMC_IS_EMMC; + dw_mmc_init(¶ms, &mmc_info); +#endif + + plat_io_setup(); +} + +void bl2_plat_arch_setup(void) +{ + plat_configure_mmu_el1(bl2_tzram_layout.total_base, + bl2_tzram_layout.total_size, + BL_CODE_BASE, + BL_CODE_END, + BL_COHERENT_RAM_BASE, + BL_COHERENT_RAM_END); +} + +void bl2_platform_setup(void) +{ +} + +uintptr_t plat_get_ns_image_entrypoint(void) +{ +#ifdef PRELOADED_BL33_BASE + return PRELOADED_BL33_BASE; +#else + return PLAT_POPLAR_NS_IMAGE_OFFSET; +#endif +} |