diff options
Diffstat (limited to 'plat/imx/imx7/common/imx7_bl2_el3_common.c')
| -rw-r--r-- | plat/imx/imx7/common/imx7_bl2_el3_common.c | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/plat/imx/imx7/common/imx7_bl2_el3_common.c b/plat/imx/imx7/common/imx7_bl2_el3_common.c new file mode 100644 index 0000000..4e5028c --- /dev/null +++ b/plat/imx/imx7/common/imx7_bl2_el3_common.c @@ -0,0 +1,198 @@ +/* + * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <assert.h> + +#include <platform_def.h> + +#include <arch_helpers.h> +#include <common/bl_common.h> +#include <common/debug.h> +#include <common/desc_image_load.h> +#include <drivers/mmc.h> +#include <lib/xlat_tables/xlat_mmu_helpers.h> +#include <lib/xlat_tables/xlat_tables_defs.h> +#include <lib/mmio.h> +#include <lib/optee_utils.h> +#include <lib/utils.h> + +#include <imx_aips.h> +#include <imx_caam.h> +#include <imx_clock.h> +#include <imx_csu.h> +#include <imx_gpt.h> +#include <imx_uart.h> +#include <imx_snvs.h> +#include <imx_wdog.h> +#include <imx7_def.h> + +#ifndef AARCH32_SP_OPTEE +#error "Must build with OPTEE support included" +#endif + +uintptr_t plat_get_ns_image_entrypoint(void) +{ + return IMX7_UBOOT_BASE; +} + +static uint32_t imx7_get_spsr_for_bl32_entry(void) +{ + return SPSR_MODE32(MODE32_svc, SPSR_T_ARM, SPSR_E_LITTLE, + DISABLE_ALL_EXCEPTIONS); +} + +static uint32_t imx7_get_spsr_for_bl33_entry(void) +{ + return SPSR_MODE32(MODE32_svc, + plat_get_ns_image_entrypoint() & 0x1, + SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS); +} + +int bl2_plat_handle_post_image_load(unsigned int image_id) +{ + int err = 0; + bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id); + bl_mem_params_node_t *hw_cfg_mem_params = NULL; + + bl_mem_params_node_t *pager_mem_params = NULL; + bl_mem_params_node_t *paged_mem_params = NULL; + + assert(bl_mem_params); + + switch (image_id) { + case BL32_IMAGE_ID: + pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID); + assert(pager_mem_params); + + paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID); + assert(paged_mem_params); + + err = parse_optee_header(&bl_mem_params->ep_info, + &pager_mem_params->image_info, + &paged_mem_params->image_info); + if (err != 0) + WARN("OPTEE header parse error.\n"); + + /* + * When ATF loads the DTB the address of the DTB is passed in + * arg2, if an hw config image is present use the base address + * as DTB address an pass it as arg2 + */ + hw_cfg_mem_params = get_bl_mem_params_node(HW_CONFIG_ID); + + bl_mem_params->ep_info.args.arg0 = + bl_mem_params->ep_info.args.arg1; + bl_mem_params->ep_info.args.arg1 = 0; + if (hw_cfg_mem_params) + bl_mem_params->ep_info.args.arg2 = + hw_cfg_mem_params->image_info.image_base; + else + bl_mem_params->ep_info.args.arg2 = 0; + bl_mem_params->ep_info.args.arg3 = 0; + bl_mem_params->ep_info.spsr = imx7_get_spsr_for_bl32_entry(); + break; + + case BL33_IMAGE_ID: + /* AArch32 only core: OP-TEE expects NSec EP in register LR */ + pager_mem_params = get_bl_mem_params_node(BL32_IMAGE_ID); + assert(pager_mem_params); + pager_mem_params->ep_info.lr_svc = bl_mem_params->ep_info.pc; + + /* BL33 expects to receive the primary CPU MPID (through r0) */ + bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr(); + bl_mem_params->ep_info.spsr = imx7_get_spsr_for_bl33_entry(); + break; + + default: + /* Do nothing in default case */ + break; + } + + return err; +} + +void bl2_el3_plat_arch_setup(void) +{ + /* Setup the MMU here */ +} + +static void imx7_setup_system_counter(void) +{ + unsigned long freq = SYS_COUNTER_FREQ_IN_TICKS; + + /* Set the frequency table index to our target frequency */ + write_cntfrq(freq); + + /* Enable system counter @ frequency table index 0, halt on debug */ + mmio_write_32(SYS_CNTCTL_BASE + CNTCR_OFF, + CNTCR_FCREQ(0) | CNTCR_HDBG | CNTCR_EN); +} + +static void imx7_setup_wdog_clocks(void) +{ + uint32_t wdog_en_bits = (uint32_t)WDOG_DEFAULT_CLK_SELECT; + + imx_clock_set_wdog_clk_root_bits(wdog_en_bits); + imx_clock_enable_wdog(0); + imx_clock_enable_wdog(1); + imx_clock_enable_wdog(2); + imx_clock_enable_wdog(3); +} + + +/* + * bl2_el3_early_platform_setup() + * MMU off + */ +void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2, + u_register_t arg3, u_register_t arg4) +{ + static console_t console; + int console_scope = CONSOLE_FLAG_BOOT | CONSOLE_FLAG_RUNTIME; + + /* Initialize common components */ + imx_aips_init(); + imx_csu_init(); + imx_snvs_init(); + imx_gpt_ops_init(GPT1_BASE_ADDR); + imx_clock_init(); + imx7_setup_system_counter(); + imx7_setup_wdog_clocks(); + + /* Platform specific setup */ + imx7_platform_setup(arg1, arg2, arg3, arg4); + + /* Init UART, clock should be enabled in imx7_platform_setup() */ + console_imx_uart_register(PLAT_IMX7_BOOT_UART_BASE, + PLAT_IMX7_BOOT_UART_CLK_IN_HZ, + PLAT_IMX7_CONSOLE_BAUDRATE, + &console); + console_set_scope(&console, console_scope); + + /* Open handles to persistent storage */ + plat_imx_io_setup(); + + /* Setup higher-level functionality CAAM, RTC etc */ + imx_caam_init(); + imx_wdog_init(); + + /* Print out the expected memory map */ + VERBOSE("\tOPTEE 0x%08x-0x%08x\n", IMX7_OPTEE_BASE, IMX7_OPTEE_LIMIT); + VERBOSE("\tATF/BL2 0x%08x-0x%08x\n", BL2_RAM_BASE, BL2_RAM_LIMIT); + VERBOSE("\tSHRAM 0x%08x-0x%08x\n", SHARED_RAM_BASE, SHARED_RAM_LIMIT); + VERBOSE("\tFIP 0x%08x-0x%08x\n", IMX_FIP_BASE, IMX_FIP_LIMIT); + VERBOSE("\tDTB-OVERLAY 0x%08x-0x%08x\n", IMX7_DTB_OVERLAY_BASE, IMX7_DTB_OVERLAY_LIMIT); + VERBOSE("\tDTB 0x%08x-0x%08x\n", IMX7_DTB_BASE, IMX7_DTB_LIMIT); + VERBOSE("\tUBOOT/BL33 0x%08x-0x%08x\n", IMX7_UBOOT_BASE, IMX7_UBOOT_LIMIT); +} + +/* + * bl2_platform_setup() + * MMU on - enabled by bl2_el3_plat_arch_setup() + */ +void bl2_platform_setup(void) +{ +} |