diff options
Diffstat (limited to '')
| -rw-r--r-- | plat/intel/soc/common/include/platform_def.h | 242 |
1 files changed, 242 insertions, 0 deletions
diff --git a/plat/intel/soc/common/include/platform_def.h b/plat/intel/soc/common/include/platform_def.h new file mode 100644 index 0000000..2b3f144 --- /dev/null +++ b/plat/intel/soc/common/include/platform_def.h @@ -0,0 +1,242 @@ +/* + * Copyright (c) 2019-2022, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2019-2022, Intel Corporation. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef PLATFORM_DEF_H +#define PLATFORM_DEF_H + +#include <arch.h> +#include <common/interrupt_props.h> +#include <common/tbbr/tbbr_img_def.h> +#include <plat/common/common_def.h> + +/* Platform Type */ +#define PLAT_SOCFPGA_STRATIX10 1 +#define PLAT_SOCFPGA_AGILEX 2 +#define PLAT_SOCFPGA_N5X 3 +#define PLAT_SOCFPGA_EMULATOR 0 + +/* sysmgr.boot_scratch_cold4 & 5 used for CPU release address for SPL */ +#define PLAT_CPU_RELEASE_ADDR 0xffd12210 + +/* + * sysmgr.boot_scratch_cold6 & 7 (64bit) are used to indicate L2 reset + * is done and HPS should trigger warm reset via RMR_EL3. + */ +#define L2_RESET_DONE_REG 0xFFD12218 + +/* Magic word to indicate L2 reset is completed */ +#define L2_RESET_DONE_STATUS 0x1228E5E7 + +/* Define next boot image name and offset */ +#define PLAT_NS_IMAGE_OFFSET 0x10000000 +#define PLAT_HANDOFF_OFFSET 0xFFE3F000 + +/******************************************************************************* + * Platform binary types for linking + ******************************************************************************/ +#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64" +#define PLATFORM_LINKER_ARCH aarch64 + +/* SoCFPGA supports up to 124GB RAM */ +#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 39) +#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 39) + + +/******************************************************************************* + * Generic platform constants + ******************************************************************************/ +#define PLAT_PRIMARY_CPU 0 +#define PLAT_SECONDARY_ENTRY_BASE 0x01f78bf0 + +/* Size of cacheable stacks */ +#define PLATFORM_STACK_SIZE 0x2000 + +/* PSCI related constant */ +#define PLAT_NUM_POWER_DOMAINS 5 +#define PLAT_MAX_PWR_LVL 1 +#define PLAT_MAX_RET_STATE 1 +#define PLAT_MAX_OFF_STATE 2 +#define PLATFORM_SYSTEM_COUNT U(1) +#define PLATFORM_CLUSTER_COUNT U(1) +#define PLATFORM_CLUSTER0_CORE_COUNT U(4) +#define PLATFORM_CLUSTER1_CORE_COUNT U(0) +#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER1_CORE_COUNT + \ + PLATFORM_CLUSTER0_CORE_COUNT) +#define PLATFORM_MAX_CPUS_PER_CLUSTER U(4) + +/* Interrupt related constant */ + +#define INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER 29 + +#define INTEL_SOCFPGA_IRQ_SEC_SGI_0 8 +#define INTEL_SOCFPGA_IRQ_SEC_SGI_1 9 +#define INTEL_SOCFPGA_IRQ_SEC_SGI_2 10 +#define INTEL_SOCFPGA_IRQ_SEC_SGI_3 11 +#define INTEL_SOCFPGA_IRQ_SEC_SGI_4 12 +#define INTEL_SOCFPGA_IRQ_SEC_SGI_5 13 +#define INTEL_SOCFPGA_IRQ_SEC_SGI_6 14 +#define INTEL_SOCFPGA_IRQ_SEC_SGI_7 15 + +#define TSP_IRQ_SEC_PHY_TIMER INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER +#define TSP_SEC_MEM_BASE BL32_BASE +#define TSP_SEC_MEM_SIZE (BL32_LIMIT - BL32_BASE + 1) +/******************************************************************************* + * Platform memory map related constants + ******************************************************************************/ +#define DRAM_BASE (0x0) +#define DRAM_SIZE (0x80000000) + +#define OCRAM_BASE (0xFFE00000) +#define OCRAM_SIZE (0x00040000) + +#define MEM64_BASE (0x0100000000) +#define MEM64_SIZE (0x1F00000000) + +#define DEVICE1_BASE (0x80000000) +#define DEVICE1_SIZE (0x60000000) + +#define DEVICE2_BASE (0xF7000000) +#define DEVICE2_SIZE (0x08E00000) + +#define DEVICE3_BASE (0xFFFC0000) +#define DEVICE3_SIZE (0x00008000) + +#define DEVICE4_BASE (0x2000000000) +#define DEVICE4_SIZE (0x0100000000) + +/******************************************************************************* + * BL31 specific defines. + ******************************************************************************/ +/* + * Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if + * present). BL31_BASE is calculated using the current BL3-1 debug size plus a + * little space for growth. + */ + + +#define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n" + +#define BL1_RO_BASE (0xffe00000) +#define BL1_RO_LIMIT (0xffe0f000) +#define BL1_RW_BASE (0xffe10000) +#define BL1_RW_LIMIT (0xffe1ffff) +#define BL1_RW_SIZE (0x14000) + +#define BL2_BASE (0xffe00000) +#define BL2_LIMIT (0xffe1b000) + +#define BL31_BASE (0x1000) +#define BL31_LIMIT (0x81000) + +#define BL_DATA_LIMIT PLAT_HANDOFF_OFFSET + +#define PLAT_CPUID_RELEASE (BL_DATA_LIMIT - 16) +#define PLAT_SEC_ENTRY (BL_DATA_LIMIT - 8) + +#define PLAT_SEC_WARM_ENTRY 0 + +/******************************************************************************* + * Platform specific page table and MMU setup constants + ******************************************************************************/ +#define MAX_XLAT_TABLES 8 +#define MAX_MMAP_REGIONS 16 + +/******************************************************************************* + * Declarations and constants to access the mailboxes safely. Each mailbox is + * aligned on the biggest cache line size in the platform. This is known only + * to the platform as it might have a combination of integrated and external + * caches. Such alignment ensures that two maiboxes do not sit on the same cache + * line at any cache level. They could belong to different cpus/clusters & + * get written while being protected by different locks causing corruption of + * a valid mailbox address. + ******************************************************************************/ +#define CACHE_WRITEBACK_SHIFT 6 +#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT) + +#define PLAT_GIC_BASE (0xFFFC0000) +#define PLAT_GICC_BASE (PLAT_GIC_BASE + 0x2000) +#define PLAT_GICD_BASE (PLAT_GIC_BASE + 0x1000) +#define PLAT_GICR_BASE 0 + +/******************************************************************************* + * UART related constants + ******************************************************************************/ +#define PLAT_UART0_BASE (0xFFC02000) +#define PLAT_UART1_BASE (0xFFC02100) + +#define CRASH_CONSOLE_BASE PLAT_UART0_BASE +#define PLAT_INTEL_UART_BASE PLAT_UART0_BASE + +#if PLAT_SOCFPGA_EMULATOR +#define PLAT_BAUDRATE (4800) +#define PLAT_UART_CLOCK (76800) +#else +#define PLAT_BAUDRATE (115200) +#define PLAT_UART_CLOCK (100000000) +#endif + +/******************************************************************************* + * PHY related constants + ******************************************************************************/ + +#define EMAC0_PHY_MODE PHY_INTERFACE_MODE_RGMII +#define EMAC1_PHY_MODE PHY_INTERFACE_MODE_RGMII +#define EMAC2_PHY_MODE PHY_INTERFACE_MODE_RGMII + +/******************************************************************************* + * System counter frequency related constants + ******************************************************************************/ +#define PLAT_SYS_COUNTER_FREQ_IN_TICKS (400000000) +#define PLAT_SYS_COUNTER_CONVERT_TO_MHZ (1000000) + +#define PLAT_INTEL_SOCFPGA_GICD_BASE PLAT_GICD_BASE +#define PLAT_INTEL_SOCFPGA_GICC_BASE PLAT_GICC_BASE + +/* + * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 + * terminology. On a GICv2 system or mode, the lists will be merged and treated + * as Group 0 interrupts. + */ +#define PLAT_INTEL_SOCFPGA_G1S_IRQ_PROPS(grp) \ + INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER, \ + GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_LEVEL), \ + INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_0, \ + GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ + INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_1, \ + GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ + INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_2, \ + GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ + INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_3, \ + GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ + INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_4, \ + GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ + INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_5, \ + GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ + INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_6, \ + GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ + INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_7, \ + GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE) + +#define PLAT_INTEL_SOCFPGA_G0_IRQ_PROPS(grp) + +#define MAX_IO_HANDLES 4 +#define MAX_IO_DEVICES 4 +#define MAX_IO_BLOCK_DEVICES 2 + +#ifndef __ASSEMBLER__ +struct socfpga_bl31_params { + param_header_t h; + image_info_t *bl31_image_info; + entry_point_info_t *bl32_ep_info; + image_info_t *bl32_image_info; + entry_point_info_t *bl33_ep_info; + image_info_t *bl33_image_info; +}; +#endif + +#endif /* PLATFORM_DEF_H */ + |