diff options
Diffstat (limited to '')
-rw-r--r-- | plat/marvell/armada/a3k/a3700/plat_bl31_setup.c | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/plat/marvell/armada/a3k/a3700/plat_bl31_setup.c b/plat/marvell/armada/a3k/a3700/plat_bl31_setup.c new file mode 100644 index 0000000..6862a86 --- /dev/null +++ b/plat/marvell/armada/a3k/a3700/plat_bl31_setup.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#include <lib/mmio.h> + +#include <armada_common.h> +#include <dram_win.h> +#include <io_addr_dec.h> +#include <marvell_plat_priv.h> +#include <plat_marvell.h> + +/* This routine does MPP initialization */ +static void marvell_bl31_mpp_init(void) +{ + mmio_clrbits_32(MVEBU_NB_GPIO_SEL_REG, 1 << MVEBU_GPIO_TW1_GPIO_EN_OFF); + + /* Set hidden GPIO setting for SPI. + * In north_bridge_pin_out_en_high register 13804, + * bit 28 is the one which enables CS, CLK pins to be + * output, need to set it to 1. + * The initial value of this bit is 1, but in UART boot mode + * initialization, this bit is disabled and the SPI CS and CLK pins + * are used for downloading image purpose; so after downloading, + * we should set this bit to 1 again to enable SPI CS and CLK pins. + * And anyway, this bit value should be 1 in all modes, + * so here we does not judge boot mode and set this bit to 1 always. + */ + mmio_setbits_32(MVEBU_NB_GPIO_OUTPUT_EN_HIGH_REG, + 1 << MVEBU_GPIO_NB_SPI_PIN_MODE_OFF); +} + +/* This function overruns the same function in marvell_bl31_setup.c */ +void bl31_plat_arch_setup(void) +{ + struct dec_win_config *io_dec_map; + uint32_t dec_win_num; + struct dram_win_map dram_wins_map; + + marvell_bl31_plat_arch_setup(); + + /* MPP init */ + marvell_bl31_mpp_init(); + + /* initialize the timer for delay functionality */ + plat_delay_timer_init(); + + /* CPU address decoder windows initialization. */ + cpu_wins_init(); + + /* fetch CPU-DRAM window mapping information by reading + * CPU-DRAM decode windows (only the enabled ones) + */ + dram_win_map_build(&dram_wins_map); + + /* Get IO address decoder windows */ + if (marvell_get_io_dec_win_conf(&io_dec_map, &dec_win_num)) { + printf("No IO address decoder windows configurations found!\n"); + return; + } + + /* IO address decoder init */ + if (init_io_addr_dec(&dram_wins_map, io_dec_map, dec_win_num)) { + printf("IO address decoder windows initialization failed!\n"); + return; + } +} |