diff options
Diffstat (limited to '')
| -rw-r--r-- | plat/marvell/armada/a3k/common/a3700_common.mk | 247 |
1 files changed, 247 insertions, 0 deletions
diff --git a/plat/marvell/armada/a3k/common/a3700_common.mk b/plat/marvell/armada/a3k/common/a3700_common.mk new file mode 100644 index 0000000..b9c28de --- /dev/null +++ b/plat/marvell/armada/a3k/common/a3700_common.mk @@ -0,0 +1,247 @@ +# +# Copyright (C) 2018-2021 Marvell International Ltd. +# +# SPDX-License-Identifier: BSD-3-Clause +# https://spdx.org/licenses +# + +MARVELL_PLAT_BASE := plat/marvell/armada +MARVELL_PLAT_INCLUDE_BASE := include/plat/marvell/armada +PLAT_FAMILY := a3k +PLAT_FAMILY_BASE := $(MARVELL_PLAT_BASE)/$(PLAT_FAMILY) +PLAT_INCLUDE_BASE := $(MARVELL_PLAT_INCLUDE_BASE)/$(PLAT_FAMILY) +PLAT_COMMON_BASE := $(PLAT_FAMILY_BASE)/common +MARVELL_DRV_BASE := drivers/marvell +MARVELL_COMMON_BASE := $(MARVELL_PLAT_BASE)/common +ERRATA_A53_1530924 := 1 + +include plat/marvell/marvell.mk + +#*********** A3700 ************* + +# GICV3 +$(eval $(call add_define,CONFIG_GICV3)) + +# CCI-400 +$(eval $(call add_define,USE_CCI)) + +# Include GICv3 driver files +include drivers/arm/gic/v3/gicv3.mk + +MARVELL_GIC_SOURCES := ${GICV3_SOURCES} \ + plat/common/plat_gicv3.c + +PLAT_INCLUDES := -I$(PLAT_FAMILY_BASE)/$(PLAT) \ + -I$(PLAT_COMMON_BASE)/include \ + -I$(PLAT_INCLUDE_BASE)/common \ + -I$(MARVELL_DRV_BASE) \ + -I$/drivers/arm/gic/common/ + +PLAT_BL_COMMON_SOURCES := $(PLAT_COMMON_BASE)/aarch64/a3700_common.c \ + $(PLAT_COMMON_BASE)/aarch64/a3700_clock.S \ + $(MARVELL_DRV_BASE)/uart/a3700_console.S + +BL1_SOURCES += $(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \ + lib/cpus/aarch64/cortex_a53.S + +MARVELL_DRV := $(MARVELL_DRV_BASE)/comphy/phy-comphy-3700.c + +BL31_SOURCES += lib/cpus/aarch64/cortex_a53.S \ + $(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \ + $(PLAT_COMMON_BASE)/plat_cci.c \ + $(PLAT_COMMON_BASE)/plat_pm.c \ + $(PLAT_COMMON_BASE)/dram_win.c \ + $(PLAT_COMMON_BASE)/io_addr_dec.c \ + $(PLAT_COMMON_BASE)/marvell_plat_config.c \ + $(PLAT_FAMILY_BASE)/$(PLAT)/plat_bl31_setup.c \ + $(MARVELL_COMMON_BASE)/marvell_cci.c \ + $(MARVELL_COMMON_BASE)/marvell_ddr_info.c \ + $(MARVELL_COMMON_BASE)/marvell_gicv3.c \ + $(MARVELL_GIC_SOURCES) \ + drivers/arm/cci/cci.c \ + $(PLAT_COMMON_BASE)/a3700_sip_svc.c \ + $(MARVELL_DRV) + +ifeq ($(HANDLE_EA_EL3_FIRST_NS),1) +BL31_SOURCES += $(PLAT_COMMON_BASE)/a3700_ea.c +endif + +ifeq ($(CM3_SYSTEM_RESET),1) +BL31_SOURCES += $(PLAT_COMMON_BASE)/cm3_system_reset.c +endif + +ifeq ($(A3720_DB_PM_WAKEUP_SRC),1) +BL31_SOURCES += $(PLAT_FAMILY_BASE)/$(PLAT)/board/pm_src.c +endif + +ifdef WTP + +# Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds +$(if $(wildcard $(value WTP)/*),,$(error "'WTP=$(value WTP)' was specified, but '$(value WTP)' directory does not exist")) +$(if $(shell git -C $(value WTP) rev-parse --show-cdup 2>&1),$(error "'WTP=$(value WTP)' was specified, but '$(value WTP)' does not contain valid A3700-utils-marvell git repository")) + +TBB := $(WTP)/wtptp/src/TBB_Linux/release/TBB_linux + +BUILD_UART := uart-images +UART_IMAGE := $(BUILD_UART).tgz.bin + +ifeq ($(MARVELL_SECURE_BOOT),1) +TIM_CFG := $(BUILD_PLAT)/atf-tim.txt +TIM_UART_CFG := $(BUILD_PLAT)/$(BUILD_UART)/atf-tim.txt +IMAGESPATH := $(WTP)/tim/trusted +TIMN_CFG := $(BUILD_PLAT)/atf-timN.txt +TIMN_UART_CFG := $(BUILD_PLAT)/$(BUILD_UART)/atf-timN.txt +TIMN_SIG := $(IMAGESPATH)/timnsign.txt +TIM2IMGARGS := -i $(TIM_CFG) -n $(TIMN_CFG) +TIMN_UART_IMAGE := $$(grep "Image Filename:" -m 1 $(TIMN_UART_CFG) | cut -c 17-) +else #MARVELL_SECURE_BOOT +TIM_CFG := $(BUILD_PLAT)/atf-ntim.txt +TIM_UART_CFG := $(BUILD_PLAT)/$(BUILD_UART)/atf-ntim.txt +IMAGESPATH := $(WTP)/tim/untrusted +TIM2IMGARGS := -i $(TIM_CFG) +endif #MARVELL_SECURE_BOOT + +TIM_UART_IMAGE := $$(grep "Image Filename:" -m 1 $(TIM_UART_CFG) | cut -c 17-) + +TIMBUILD := $(WTP)/script/buildtim.sh +TIM2IMG := $(WTP)/script/tim2img.pl +TIMDDRTOOL := $(WTP)/tim/ddr/ddr_tool + +$(TIMBUILD): $(TIMDDRTOOL) + +# WTMI_IMG is used to specify the customized RTOS image running over +# Service CPU (CM3 processor). By the default, it points to a +# baremetal binary of fuse programming in A3700_utils. +WTMI_IMG := $(WTP)/wtmi/fuse/build/fuse.bin + +# WTMI_MULTI_IMG is composed of CM3 RTOS image (WTMI_IMG) +# and sys-init image. +WTMI_MULTI_IMG := $(WTP)/wtmi/build/wtmi.bin + +WTMI_ENC_IMG := wtmi-enc.bin + +SRCPATH := $(dir $(BL33)) + +CLOCKSPRESET ?= CPU_800_DDR_800 + +DDR_TOPOLOGY ?= 0 + +BOOTDEV ?= SPINOR +PARTNUM ?= 0 + +TIMBLDARGS := $(MARVELL_SECURE_BOOT) $(BOOTDEV) $(IMAGESPATH) $(WTP) $(CLOCKSPRESET) \ + $(DDR_TOPOLOGY) $(PARTNUM) $(DEBUG) $(TIM_CFG) $(TIMN_CFG) $(TIMN_SIG) 1 +TIMBLDUARTARGS := $(MARVELL_SECURE_BOOT) UART $(IMAGESPATH) $(WTP) $(CLOCKSPRESET) \ + $(DDR_TOPOLOGY) 0 0 $(TIM_UART_CFG) $(TIMN_UART_CFG) $(TIMN_SIG) 0 + +UART_IMAGES := $(BUILD_UART)/$(TIM_UART_IMAGE) +ifeq ($(MARVELL_SECURE_BOOT),1) +UART_IMAGES += $(BUILD_UART)/$(TIMN_UART_IMAGE) +endif +UART_IMAGES += $(BUILD_UART)/wtmi_h.bin $(BUILD_UART)/boot-image_h.bin + +CRYPTOPP_LIBDIR ?= $(CRYPTOPP_PATH) +CRYPTOPP_INCDIR ?= $(CRYPTOPP_PATH) + +$(TBB): FORCE +# Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds + $(if $(CRYPTOPP_LIBDIR),,$(error "Platform '$(PLAT)' for WTP image tool requires CRYPTOPP_PATH or CRYPTOPP_LIBDIR. Please set CRYPTOPP_PATH or CRYPTOPP_LIBDIR to point to the right directory")) + $(if $(CRYPTOPP_INCDIR),,$(error "Platform '$(PLAT)' for WTP image tool requires CRYPTOPP_PATH or CRYPTOPP_INCDIR. Please set CRYPTOPP_PATH or CRYPTOPP_INCDIR to point to the right directory")) + $(if $(wildcard $(CRYPTOPP_LIBDIR)/*),,$(error "Either 'CRYPTOPP_PATH' or 'CRYPTOPP_LIB' was set to '$(CRYPTOPP_LIBDIR)', but '$(CRYPTOPP_LIBDIR)' does not exist")) + $(if $(wildcard $(CRYPTOPP_INCDIR)/*),,$(error "Either 'CRYPTOPP_PATH' or 'CRYPTOPP_INCDIR' was set to '$(CRYPTOPP_INCDIR)', but '$(CRYPTOPP_INCDIR)' does not exist")) +ifdef CRYPTOPP_PATH + $(Q)$(MAKE) --no-print-directory -C $(CRYPTOPP_PATH) -f GNUmakefile +endif + $(Q)$(MAKE) --no-print-directory -C $(WTP)/wtptp/src/TBB_Linux -f TBB_linux.mak LIBDIR=$(CRYPTOPP_LIBDIR) INCDIR=$(CRYPTOPP_INCDIR) + +$(WTMI_MULTI_IMG): FORCE + $(Q)$(MAKE) --no-print-directory -C $(WTP) WTMI_IMG=$(WTMI_IMG) DDR_TOPOLOGY=$(DDR_TOPOLOGY) CLOCKSPRESET=$(CLOCKSPRESET) WTMI + +$(BUILD_PLAT)/wtmi.bin: $(WTMI_MULTI_IMG) + $(Q)cp -a $(WTMI_MULTI_IMG) $(BUILD_PLAT)/wtmi.bin + +$(TIMDDRTOOL): FORCE +# Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds + $(if $(value MV_DDR_PATH),,$(error "Platform '${PLAT}' for ddr tool requires MV_DDR_PATH. Please set MV_DDR_PATH to point to the right directory")) + $(if $(wildcard $(value MV_DDR_PATH)/*),,$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' directory does not exist")) + $(if $(shell git -C $(value MV_DDR_PATH) rev-parse --show-cdup 2>&1),$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' does not contain valid mv-ddr-marvell git repository")) + $(Q)$(MAKE) --no-print-directory -C $(WTP) MV_DDR_PATH=$(MV_DDR_PATH) DDR_TOPOLOGY=$(DDR_TOPOLOGY) mv_ddr + +$(BUILD_PLAT)/$(UART_IMAGE): $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/wtmi.bin $(TBB) $(TIMBUILD) $(TIMDDRTOOL) + @$(ECHO_BLANK_LINE) + @echo "Building uart images" + $(Q)mkdir -p $(BUILD_PLAT)/$(BUILD_UART) + $(Q)cp -a $(BUILD_PLAT)/wtmi.bin $(BUILD_PLAT)/$(BUILD_UART)/wtmi.bin + $(Q)cp -a $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/$(BUILD_UART)/$(BOOT_IMAGE) + $(Q)cd $(BUILD_PLAT)/$(BUILD_UART) && $(TIMBUILD) $(TIMBLDUARTARGS) + $(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(TIM_UART_CFG) + $(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(TIM_UART_CFG) +ifeq ($(MARVELL_SECURE_BOOT),1) + $(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(TIMN_UART_CFG) + $(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(TIMN_UART_CFG) +endif + $(Q)cd $(BUILD_PLAT)/$(BUILD_UART) && $(TBB) -r $(TIM_UART_CFG) -v -D +ifeq ($(MARVELL_SECURE_BOOT),1) + $(Q)cd $(BUILD_PLAT)/$(BUILD_UART) && $(TBB) -r $(TIMN_UART_CFG) +endif + $(Q)tar czf $(BUILD_PLAT)/$(UART_IMAGE) -C $(BUILD_PLAT) $(UART_IMAGES) + @$(ECHO_BLANK_LINE) + @echo "Built $@ successfully" + @$(ECHO_BLANK_LINE) + +$(BUILD_PLAT)/$(FLASH_IMAGE): $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/wtmi.bin $(TBB) $(TIMBUILD) $(TIMDDRTOOL) $(TIM2IMG) + @$(ECHO_BLANK_LINE) + @echo "Building flash image" + $(Q)cd $(BUILD_PLAT) && $(TIMBUILD) $(TIMBLDARGS) + $(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(TIM_CFG) + $(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(TIM_CFG) +ifeq ($(MARVELL_SECURE_BOOT),1) + $(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(TIMN_CFG) + $(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(TIMN_CFG) + @$(ECHO_BLANK_LINE) + @echo "======================================================="; + @echo " Secure boot. Encrypting wtmi and boot-image"; + @echo "======================================================="; + @$(ECHO_BLANK_LINE) + $(Q)cp $(BUILD_PLAT)/wtmi.bin $(BUILD_PLAT)/wtmi-align.bin + $(Q)truncate -s %16 $(BUILD_PLAT)/wtmi-align.bin + $(Q)${OPENSSL_BIN_PATH}/openssl enc -aes-256-cbc -e -in $(BUILD_PLAT)/wtmi-align.bin \ + -out $(BUILD_PLAT)/$(WTMI_ENC_IMG) \ + -K `cat $(IMAGESPATH)/aes-256.txt` -nosalt \ + -iv `cat $(IMAGESPATH)/iv.txt` -p + $(Q)truncate -s %16 $(BUILD_PLAT)/$(BOOT_IMAGE); + $(Q)${OPENSSL_BIN_PATH}/openssl enc -aes-256-cbc -e -in $(BUILD_PLAT)/$(BOOT_IMAGE) \ + -out $(BUILD_PLAT)/$(BOOT_ENC_IMAGE) \ + -K `cat $(IMAGESPATH)/aes-256.txt` -nosalt \ + -iv `cat $(IMAGESPATH)/iv.txt` -p +endif + $(Q)cd $(BUILD_PLAT) && $(TBB) -r $(TIM_CFG) -v -D +ifeq ($(MARVELL_SECURE_BOOT),1) + $(Q)cd $(BUILD_PLAT) && $(TBB) -r $(TIMN_CFG) + $(Q)sed -i 's|wtmi.bin|$(WTMI_ENC_IMG)|1' $(TIMN_CFG) + $(Q)sed -i 's|$(BOOT_IMAGE)|$(BOOT_ENC_IMAGE)|1' $(TIMN_CFG) +endif + $(Q)cd $(BUILD_PLAT) && $(TIM2IMG) $(TIM2IMGARGS) -o $(BUILD_PLAT)/$(FLASH_IMAGE) + @$(ECHO_BLANK_LINE) + @echo "Built $@ successfully" + @$(ECHO_BLANK_LINE) + +clean realclean distclean: mrvl_clean + +.PHONY: mrvl_clean +mrvl_clean: + -$(Q)$(MAKE) --no-print-directory -C $(WTP) MV_DDR_PATH=$(MV_DDR_PATH) clean + -$(Q)$(MAKE) --no-print-directory -C $(WTP)/wtptp/src/TBB_Linux -f TBB_linux.mak clean +ifdef CRYPTOPP_PATH + -$(Q)$(MAKE) --no-print-directory -C $(CRYPTOPP_PATH) -f GNUmakefile clean +endif + +else # WTP + +$(BUILD_PLAT)/$(UART_IMAGE) $(BUILD_PLAT)/$(FLASH_IMAGE): + $(error "Platform '${PLAT}' for target '$@' requires WTP. Please set WTP to point to the right directory") + +endif # WTP + +.PHONY: mrvl_uart +mrvl_uart: $(BUILD_PLAT)/$(UART_IMAGE) |