diff options
Diffstat (limited to 'plat/marvell/armada/a8k/a70x0_amc/board')
| -rw-r--r-- | plat/marvell/armada/a8k/a70x0_amc/board/dram_port.c | 91 | ||||
| -rw-r--r-- | plat/marvell/armada/a8k/a70x0_amc/board/marvell_plat_config.c | 148 |
2 files changed, 239 insertions, 0 deletions
diff --git a/plat/marvell/armada/a8k/a70x0_amc/board/dram_port.c b/plat/marvell/armada/a8k/a70x0_amc/board/dram_port.c new file mode 100644 index 0000000..9c8c97e --- /dev/null +++ b/plat/marvell/armada/a8k/a70x0_amc/board/dram_port.c @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#include <arch_helpers.h> +#include <common/debug.h> + +#include <mv_ddr_if.h> +#include <plat_marvell.h> + +/* + * This function may modify the default DRAM parameters + * based on information received from SPD or bootloader + * configuration located on non volatile storage + */ +void plat_marvell_dram_update_topology(void) +{ +} + +/* + * This struct provides the DRAM training code with + * the appropriate board DRAM configuration + */ +static struct mv_ddr_topology_map board_topology_map = { +/* FIXME: MISL board 2CS 8Gb x8 devices of micron - 2133P */ + DEBUG_LEVEL_ERROR, + 0x1, /* active interfaces */ + /* cs_mask, mirror, dqs_swap, ck_swap X subphys */ + { { { {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0} }, + SPEED_BIN_DDR_2400T, /* speed_bin */ + MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */ + MV_DDR_DIE_CAP_8GBIT, /* die capacity */ + MV_DDR_FREQ_SAR, /* frequency */ + 0, 0, /* cas_l, cas_wl */ + MV_DDR_TEMP_LOW} }, /* temperature */ + MV_DDR_32BIT_ECC_PUP8_BUS_MASK, /* subphys mask */ + MV_DDR_CFG_DEFAULT, /* ddr configuration data source */ + NOT_COMBINED, /* ddr twin-die combined*/ + { {0} }, /* raw spd data */ + {0}, /* timing parameters */ + { /* electrical configuration */ + { /* memory electrical configuration */ + MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */ + { + MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */ + }, + { + MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */ + MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */ + }, + MV_DDR_DIC_RZQ_DIV7 /* dic */ + }, + { /* phy electrical configuration */ + MV_DDR_OHM_30, /* data_drv_p */ + MV_DDR_OHM_30, /* data_drv_n */ + MV_DDR_OHM_30, /* ctrl_drv_p */ + MV_DDR_OHM_30, /* ctrl_drv_n */ + { + MV_DDR_OHM_60, /* odt_p 1cs */ + MV_DDR_OHM_120 /* odt_p 2cs */ + }, + { + MV_DDR_OHM_60, /* odt_n 1cs */ + MV_DDR_OHM_120 /* odt_n 2cs */ + }, + }, + { /* mac electrical configuration */ + MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */ + MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */ + MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */ + }, + } +}; + +struct mv_ddr_topology_map *mv_ddr_topology_map_get(void) +{ + /* Return the board topology as defined in the board code */ + return &board_topology_map; +} diff --git a/plat/marvell/armada/a8k/a70x0_amc/board/marvell_plat_config.c b/plat/marvell/armada/a8k/a70x0_amc/board/marvell_plat_config.c new file mode 100644 index 0000000..3b68e91 --- /dev/null +++ b/plat/marvell/armada/a8k/a70x0_amc/board/marvell_plat_config.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#include <armada_common.h> + +/* + * If bootrom is currently at BLE there's no need to include the memory + * maps structure at this point + */ +#include <mvebu_def.h> +#ifndef IMAGE_BLE + +/***************************************************************************** + * AMB Configuration + ***************************************************************************** + */ +struct addr_map_win *amb_memory_map; + +int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size, + uintptr_t base) +{ + *win = amb_memory_map; + if (*win == NULL) + *size = 0; + else + *size = ARRAY_SIZE(amb_memory_map); + + return 0; +} +#endif + +/***************************************************************************** + * IO WIN Configuration + ***************************************************************************** + */ +struct addr_map_win io_win_memory_map[] = { +#ifndef IMAGE_BLE + /* MCI 0 indirect window */ + {MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID}, + /* MCI 1 indirect window */ + {MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID}, +#endif +}; + +uint32_t marvell_get_io_win_gcr_target(int ap_index) +{ + return PIDI_TID; +} + +int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win, + uint32_t *size) +{ + *win = io_win_memory_map; + if (*win == NULL) + *size = 0; + else + *size = ARRAY_SIZE(io_win_memory_map); + + return 0; +} + +#ifndef IMAGE_BLE +/***************************************************************************** + * IOB Configuration + ***************************************************************************** + */ +struct addr_map_win iob_memory_map[] = { + /* PEX0_X4 window */ + {0x00000000f6000000, 0x6000000, PEX0_TID}, + {0x00000000c0000000, 0x30000000, PEX0_TID}, + {0x0000000800000000, 0x200000000, PEX0_TID}, +}; + +int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size, + uintptr_t base) +{ + *win = iob_memory_map; + *size = ARRAY_SIZE(iob_memory_map); + + return 0; +} +#endif + +/***************************************************************************** + * CCU Configuration + ***************************************************************************** + */ +struct addr_map_win ccu_memory_map[] = { +#ifdef IMAGE_BLE + {0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */ +#else +#if LLC_SRAM + /* This entry is prepared for OP-TEE OS that enables the LLC SRAM + * and changes the window target to SRAM_TID. + */ + {PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, DRAM_0_TID}, +#endif + {0x00000000f2000000, 0xe000000, IO_0_TID}, + {0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */ + {0x0000000800000000, 0x200000000, IO_0_TID}, /* IO window */ +#endif +}; + +uint32_t marvell_get_ccu_gcr_target(int ap) +{ + return DRAM_0_TID; +} + +int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win, + uint32_t *size) +{ + *win = ccu_memory_map; + *size = ARRAY_SIZE(ccu_memory_map); + + return 0; +} + +#ifdef IMAGE_BLE + +struct pci_hw_cfg *plat_get_pcie_hw_data(void) +{ + return NULL; +} + +/***************************************************************************** + * SKIP IMAGE Configuration + ***************************************************************************** + */ +#if PLAT_RECOVERY_IMAGE_ENABLE +struct skip_image skip_im = { + .detection_method = GPIO, + .info.gpio.num = 33, + .info.gpio.button_state = HIGH, + .info.test.cp_ap = CP, + .info.test.cp_index = 0, +}; + +void *plat_marvell_get_skip_image_data(void) +{ + /* Return the skip_image configurations */ + return &skip_im; +} +#endif +#endif |