summaryrefslogtreecommitdiffstats
path: root/plat/mediatek/drivers/uart
diff options
context:
space:
mode:
Diffstat (limited to 'plat/mediatek/drivers/uart')
-rw-r--r--plat/mediatek/drivers/uart/8250_console.S163
-rw-r--r--plat/mediatek/drivers/uart/uart.c112
-rw-r--r--plat/mediatek/drivers/uart/uart.h100
-rw-r--r--plat/mediatek/drivers/uart/uart8250.h38
4 files changed, 413 insertions, 0 deletions
diff --git a/plat/mediatek/drivers/uart/8250_console.S b/plat/mediatek/drivers/uart/8250_console.S
new file mode 100644
index 0000000..66f998d
--- /dev/null
+++ b/plat/mediatek/drivers/uart/8250_console.S
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <asm_macros.S>
+#include <uart8250.h>
+
+ .globl console_core_init
+ .globl console_core_putc
+ .globl console_core_getc
+ .globl console_core_flush
+
+ /* -----------------------------------------------
+ * int console_core_init(unsigned long base_addr,
+ * unsigned int uart_clk, unsigned int baud_rate)
+ * Function to initialize the console without a
+ * C Runtime to print debug information. This
+ * function will be accessed by console_init and
+ * crash reporting.
+ * In: x0 - console base address
+ * w1 - Uart clock in Hz
+ * w2 - Baud rate
+ * Out: return 1 on success else 0 on error
+ * Clobber list : x1, x2, x3
+ * -----------------------------------------------
+ */
+func console_core_init
+ /* Check the input base address */
+ cbz x0, core_init_fail
+ /* Check baud rate and uart clock for sanity */
+ cbz w1, core_init_fail
+ cbz w2, core_init_fail
+
+ /* Disable interrupt */
+ str wzr, [x0, #UART_IER]
+
+ /* Force DTR and RTS to high */
+ mov w3, #(UART_MCR_DTR | UART_MCR_RTS)
+ str w3, [x0, #UART_MCR]
+
+ /* Check high speed */
+ movz w3, #:abs_g1:115200
+ movk w3, #:abs_g0_nc:115200
+ cmp w2, w3
+ b.hi 1f
+
+ /* Non high speed */
+ lsl w2, w2, #4
+ mov w3, wzr
+ b 2f
+
+ /* High speed */
+1: lsl w2, w2, #2
+ mov w3, #2
+
+ /* Set high speed UART register */
+2: str w3, [x0, #UART_HIGHSPEED]
+
+ /* Calculate divisor */
+ udiv w3, w1, w2 /* divisor = uartclk / (quot * baudrate) */
+ msub w1, w3, w2, w1 /* remainder = uartclk % (quot * baudrate) */
+ lsr w2, w2, #1
+ cmp w1, w2
+ cinc w3, w3, hs
+
+ /* Set line configuration, access divisor latches */
+ mov w1, #(UART_LCR_DLAB | UART_LCR_WLS_8)
+ str w1, [x0, #UART_LCR]
+
+ /* Set the divisor */
+ and w1, w3, #0xff
+ str w1, [x0, #UART_DLL]
+ lsr w1, w3, #8
+ and w1, w1, #0xff
+ str w1, [x0, #UART_DLH]
+
+ /* Hide the divisor latches */
+ mov w1, #UART_LCR_WLS_8
+ str w1, [x0, #UART_LCR]
+
+ /* Enable FIFOs, and clear receive and transmit */
+ mov w1, #(UART_FCR_FIFO_EN | UART_FCR_CLEAR_RCVR | \
+ UART_FCR_CLEAR_XMIT)
+ str w1, [x0, #UART_FCR]
+
+ mov w0, #1
+ ret
+core_init_fail:
+ mov w0, wzr
+ ret
+endfunc console_core_init
+
+ /* --------------------------------------------------------
+ * int console_core_putc(int c, unsigned long base_addr)
+ * Function to output a character over the console. It
+ * returns the character printed on success or -1 on error.
+ * In : w0 - character to be printed
+ * x1 - console base address
+ * Out : return -1 on error else return character.
+ * Clobber list : x2
+ * --------------------------------------------------------
+ */
+func console_core_putc
+ /* Check the input parameter */
+ cbz x1, putc_error
+ /* Prepend '\r' to '\n' */
+ cmp w0, #0xA
+ b.ne 2f
+
+ /* Check if the transmit FIFO is full */
+1: ldr w2, [x1, #UART_LSR]
+ and w2, w2, #UART_LSR_THRE
+ cbz w2, 1b
+ mov w2, #0xD
+ str w2, [x1, #UART_THR]
+
+ /* Check if the transmit FIFO is full */
+2: ldr w2, [x1, #UART_LSR]
+ and w2, w2, #UART_LSR_THRE
+ cbz w2, 2b
+ str w0, [x1, #UART_THR]
+ ret
+putc_error:
+ mov w0, #-1
+ ret
+endfunc console_core_putc
+
+ /* ---------------------------------------------
+ * int console_core_getc(unsigned long base_addr)
+ * Function to get a character from the console.
+ * It returns the character grabbed on success
+ * or -1 on error.
+ * In : x0 - console base address
+ * Clobber list : x0, x1
+ * ---------------------------------------------
+ */
+func console_core_getc
+ cbz x0, getc_error
+
+ /* Check if the receive FIFO is empty */
+1: ldr w1, [x0, #UART_LSR]
+ tbz w1, #UART_LSR_DR, 1b
+ ldr w0, [x0, #UART_RBR]
+ ret
+getc_error:
+ mov w0, #-1
+ ret
+endfunc console_core_getc
+
+ /* ---------------------------------------------
+ * void console_core_flush(uintptr_t base_addr)
+ * Function to force a write of all buffered
+ * data that hasn't been output.
+ * In : x0 - console base address
+ * Out : void.
+ * Clobber list : x0, x1
+ * ---------------------------------------------
+ */
+func console_core_flush
+ /* Placeholder */
+ ret
+endfunc console_core_flush
diff --git a/plat/mediatek/drivers/uart/uart.c b/plat/mediatek/drivers/uart/uart.c
new file mode 100644
index 0000000..fdaa793
--- /dev/null
+++ b/plat/mediatek/drivers/uart/uart.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <lib/mmio.h>
+#include <uart.h>
+
+static struct mt_uart uart_save_addr[DRV_SUPPORT_UART_PORTS];
+
+static const uint32_t uart_base_addr[DRV_SUPPORT_UART_PORTS] = {
+ UART0_BASE,
+ UART1_BASE
+};
+
+void mt_uart_restore(void)
+{
+ int uart_idx = UART_PORT0;
+ struct mt_uart *uart;
+ unsigned long base;
+
+ /* Must NOT print any debug log before UART restore */
+ for (uart_idx = UART_PORT0; uart_idx < HW_SUPPORT_UART_PORTS;
+ uart_idx++) {
+
+ uart = &uart_save_addr[uart_idx];
+ base = uart->base;
+
+ mmio_write_32(UART_LCR(base), UART_LCR_MODE_B);
+ mmio_write_32(UART_EFR(base), uart->registers.efr);
+ mmio_write_32(UART_LCR(base), uart->registers.lcr);
+ mmio_write_32(UART_FCR(base), uart->registers.fcr);
+
+ /* baudrate */
+ mmio_write_32(UART_HIGHSPEED(base), uart->registers.highspeed);
+ mmio_write_32(UART_FRACDIV_L(base), uart->registers.fracdiv_l);
+ mmio_write_32(UART_FRACDIV_M(base), uart->registers.fracdiv_m);
+ mmio_write_32(UART_LCR(base),
+ uart->registers.lcr | UART_LCR_DLAB);
+ mmio_write_32(UART_DLL(base), uart->registers.dll);
+ mmio_write_32(UART_DLH(base), uart->registers.dlh);
+ mmio_write_32(UART_LCR(base), uart->registers.lcr);
+ mmio_write_32(UART_SAMPLE_COUNT(base),
+ uart->registers.sample_count);
+ mmio_write_32(UART_SAMPLE_POINT(base),
+ uart->registers.sample_point);
+ mmio_write_32(UART_GUARD(base), uart->registers.guard);
+
+ /* flow control */
+ mmio_write_32(UART_ESCAPE_EN(base), uart->registers.escape_en);
+ mmio_write_32(UART_MCR(base), uart->registers.mcr);
+ mmio_write_32(UART_IER(base), uart->registers.ier);
+ mmio_write_32(UART_SCR(base), uart->registers.scr);
+ }
+}
+
+void mt_uart_save(void)
+{
+ int uart_idx = UART_PORT0;
+ struct mt_uart *uart;
+ unsigned long base;
+
+ for (uart_idx = UART_PORT0; uart_idx < HW_SUPPORT_UART_PORTS;
+ uart_idx++) {
+
+ uart_save_addr[uart_idx].base = uart_base_addr[uart_idx];
+ base = uart_base_addr[uart_idx];
+ uart = &uart_save_addr[uart_idx];
+ uart->registers.lcr = mmio_read_32(UART_LCR(base));
+
+ mmio_write_32(UART_LCR(base), UART_LCR_MODE_B);
+ uart->registers.efr = mmio_read_32(UART_EFR(base));
+ mmio_write_32(UART_LCR(base), uart->registers.lcr);
+ uart->registers.fcr = mmio_read_32(UART_FCR_RD(base));
+
+ /* baudrate */
+ uart->registers.highspeed = mmio_read_32(UART_HIGHSPEED(base));
+ uart->registers.fracdiv_l = mmio_read_32(UART_FRACDIV_L(base));
+ uart->registers.fracdiv_m = mmio_read_32(UART_FRACDIV_M(base));
+ mmio_write_32(UART_LCR(base),
+ uart->registers.lcr | UART_LCR_DLAB);
+ uart->registers.dll = mmio_read_32(UART_DLL(base));
+ uart->registers.dlh = mmio_read_32(UART_DLH(base));
+ mmio_write_32(UART_LCR(base), uart->registers.lcr);
+ uart->registers.sample_count = mmio_read_32(
+ UART_SAMPLE_COUNT(base));
+ uart->registers.sample_point = mmio_read_32(
+ UART_SAMPLE_POINT(base));
+ uart->registers.guard = mmio_read_32(UART_GUARD(base));
+
+ /* flow control */
+ uart->registers.escape_en = mmio_read_32(UART_ESCAPE_EN(base));
+ uart->registers.mcr = mmio_read_32(UART_MCR(base));
+ uart->registers.ier = mmio_read_32(UART_IER(base));
+ uart->registers.scr = mmio_read_32(UART_SCR(base));
+ }
+}
+
+void mt_console_uart_cg(int on)
+{
+ if (on == 1) {
+ mmio_write_32(UART_CLOCK_GATE_CLR, UART0_CLOCK_GATE_BIT);
+ } else {
+ mmio_write_32(UART_CLOCK_GATE_SET, UART0_CLOCK_GATE_BIT);
+ }
+}
+
+uint32_t mt_console_uart_cg_status(void)
+{
+ return mmio_read_32(UART_CLOCK_GATE_STA) & UART0_CLOCK_GATE_BIT;
+}
diff --git a/plat/mediatek/drivers/uart/uart.h b/plat/mediatek/drivers/uart/uart.h
new file mode 100644
index 0000000..2ca74fa
--- /dev/null
+++ b/plat/mediatek/drivers/uart/uart.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef UART_H
+#define UART_H
+
+#include <platform_def.h>
+
+/* UART HW information */
+#define HW_SUPPORT_UART_PORTS 2
+#define DRV_SUPPORT_UART_PORTS 2
+
+/* console UART clock cg */
+#define UART_CLOCK_GATE_SET (INFRACFG_AO_BASE + 0x80)
+#define UART_CLOCK_GATE_CLR (INFRACFG_AO_BASE + 0x84)
+#define UART_CLOCK_GATE_STA (INFRACFG_AO_BASE + 0x90)
+#define UART0_CLOCK_GATE_BIT (1U<<22)
+#define UART1_CLOCK_GATE_BIT (1U<<23)
+
+/* UART registers */
+#define UART_RBR(_baseaddr) (_baseaddr + 0x0)
+#define UART_THR(_baseaddr) (_baseaddr + 0x0)
+#define UART_IER(_baseaddr) (_baseaddr + 0x4)
+#define UART_IIR(_baseaddr) (_baseaddr + 0x8)
+#define UART_FCR(_baseaddr) (_baseaddr + 0x8)
+#define UART_LCR(_baseaddr) (_baseaddr + 0xc)
+#define UART_MCR(_baseaddr) (_baseaddr + 0x10)
+#define UART_LSR(_baseaddr) (_baseaddr + 0x14)
+#define UART_MSR(_baseaddr) (_baseaddr + 0x18)
+#define UART_SCR(_baseaddr) (_baseaddr + 0x1c)
+#define UART_DLL(_baseaddr) (_baseaddr + 0x0)
+#define UART_DLH(_baseaddr) (_baseaddr + 0x4)
+#define UART_EFR(_baseaddr) (_baseaddr + 0x8)
+#define UART_XON1(_baseaddr) (_baseaddr + 0x10)
+#define UART_XON2(_baseaddr) (_baseaddr + 0x14)
+#define UART_XOFF1(_baseaddr) (_baseaddr + 0x18)
+#define UART_XOFF2(_baseaddr) (_baseaddr + 0x1c)
+#define UART_AUTOBAUD(_baseaddr) (_baseaddr + 0x20)
+#define UART_HIGHSPEED(_baseaddr) (_baseaddr + 0x24)
+#define UART_SAMPLE_COUNT(_baseaddr) (_baseaddr + 0x28)
+#define UART_SAMPLE_POINT(_baseaddr) (_baseaddr + 0x2c)
+#define UART_AUTOBAUD_REG(_baseaddr) (_baseaddr + 0x30)
+#define UART_RATE_FIX_REG(_baseaddr) (_baseaddr + 0x34)
+#define UART_AUTO_BAUDSAMPLE(_baseaddr) (_baseaddr + 0x38)
+#define UART_GUARD(_baseaddr) (_baseaddr + 0x3c)
+#define UART_ESCAPE_DAT(_baseaddr) (_baseaddr + 0x40)
+#define UART_ESCAPE_EN(_baseaddr) (_baseaddr + 0x44)
+#define UART_SLEEP_EN(_baseaddr) (_baseaddr + 0x48)
+#define UART_DMA_EN(_baseaddr) (_baseaddr + 0x4c)
+#define UART_RXTRI_AD(_baseaddr) (_baseaddr + 0x50)
+#define UART_FRACDIV_L(_baseaddr) (_baseaddr + 0x54)
+#define UART_FRACDIV_M(_baseaddr) (_baseaddr + 0x58)
+#define UART_FCR_RD(_baseaddr) (_baseaddr + 0x5C)
+#define UART_USB_RX_SEL(_baseaddr) (_baseaddr + 0xB0)
+#define UART_SLEEP_REQ(_baseaddr) (_baseaddr + 0xB4)
+#define UART_SLEEP_ACK(_baseaddr) (_baseaddr + 0xB8)
+#define UART_SPM_SEL(_baseaddr) (_baseaddr + 0xBC)
+#define UART_LCR_DLAB 0x0080
+#define UART_LCR_MODE_B 0x00bf
+
+enum uart_port_ID {
+ UART_PORT0 = 0,
+ UART_PORT1
+};
+
+struct mt_uart_register {
+ uint32_t dll;
+ uint32_t dlh;
+ uint32_t ier;
+ uint32_t lcr;
+ uint32_t mcr;
+ uint32_t fcr;
+ uint32_t lsr;
+ uint32_t scr;
+ uint32_t efr;
+ uint32_t highspeed;
+ uint32_t sample_count;
+ uint32_t sample_point;
+ uint32_t fracdiv_l;
+ uint32_t fracdiv_m;
+ uint32_t escape_en;
+ uint32_t guard;
+ uint32_t rx_sel;
+};
+
+struct mt_uart {
+ unsigned long base;
+ struct mt_uart_register registers;
+};
+
+/* external API */
+void mt_uart_save(void);
+void mt_uart_restore(void);
+void mt_console_uart_cg(int on);
+uint32_t mt_console_uart_cg_status(void);
+
+#endif /* __UART_H__ */
diff --git a/plat/mediatek/drivers/uart/uart8250.h b/plat/mediatek/drivers/uart/uart8250.h
new file mode 100644
index 0000000..f0541d6
--- /dev/null
+++ b/plat/mediatek/drivers/uart/uart8250.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef UART8250_H
+#define UART8250_H
+
+/* UART register */
+#define UART_RBR 0x00 /* Receive buffer register */
+#define UART_DLL 0x00 /* Divisor latch lsb */
+#define UART_THR 0x00 /* Transmit holding register */
+#define UART_DLH 0x04 /* Divisor latch msb */
+#define UART_IER 0x04 /* Interrupt enable register */
+#define UART_FCR 0x08 /* FIFO control register */
+#define UART_LCR 0x0c /* Line control register */
+#define UART_MCR 0x10 /* Modem control register */
+#define UART_LSR 0x14 /* Line status register */
+#define UART_HIGHSPEED 0x24 /* High speed UART */
+
+/* FCR */
+#define UART_FCR_FIFO_EN 0x01 /* enable FIFO */
+#define UART_FCR_CLEAR_RCVR 0x02 /* clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT 0x04 /* clear the XMIT FIFO */
+
+/* LCR */
+#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
+#define UART_LCR_DLAB 0x80 /* divisor latch access bit */
+
+/* MCR */
+#define UART_MCR_DTR 0x01
+#define UART_MCR_RTS 0x02
+
+/* LSR */
+#define UART_LSR_DR 0x01 /* Data ready */
+#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
+
+#endif /* UART8250_H */