diff options
Diffstat (limited to '')
| -rw-r--r-- | plat/mediatek/mt8183/bl31_plat_setup.c | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/plat/mediatek/mt8183/bl31_plat_setup.c b/plat/mediatek/mt8183/bl31_plat_setup.c new file mode 100644 index 0000000..7dac8a4 --- /dev/null +++ b/plat/mediatek/mt8183/bl31_plat_setup.c @@ -0,0 +1,181 @@ +/* + * Copyright (c) 2019, MediaTek Inc. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <assert.h> +#include <arch_helpers.h> +#include <common/bl_common.h> +#include <common/desc_image_load.h> +#include <devapc.h> +#include <emi_mpu.h> +#include <plat/common/common_def.h> +#include <drivers/console.h> +#include <common/debug.h> +#include <drivers/generic_delay_timer.h> +#include <mcucfg.h> +#include <mt_gic_v3.h> +#include <mt_timer.h> +#include <lib/coreboot.h> +#include <lib/mmio.h> +#include <mtk_mcdi.h> +#include <mtk_plat_common.h> +#include <mtspmc.h> +#include <plat_debug.h> +#include <plat_params.h> +#include <plat_private.h> +#include <platform_def.h> +#include <scu.h> +#include <spm.h> +#include <drivers/ti/uart/uart_16550.h> + +static entry_point_info_t bl32_ep_info; +static entry_point_info_t bl33_ep_info; + +static void platform_setup_cpu(void) +{ + mmio_write_32((uintptr_t)&mt8183_mcucfg->mp0_rw_rsvd0, 0x00000001); + + /* Mcusys dcm control */ + /* Enable pll plldiv dcm */ + mmio_setbits_32((uintptr_t)&mt8183_mcucfg->bus_pll_divider_cfg, + BUS_PLLDIV_DCM); + mmio_setbits_32((uintptr_t)&mt8183_mcucfg->mp0_pll_divider_cfg, + MP0_PLLDIV_DCM); + mmio_setbits_32((uintptr_t)&mt8183_mcucfg->mp2_pll_divider_cfg, + MP2_PLLDIV_DCM); + /* Enable mscib dcm */ + mmio_clrsetbits_32((uintptr_t)&mt8183_mcucfg->mscib_dcm_en, + MCSIB_CACTIVE_SEL_MASK, MCSIB_CACTIVE_SEL); + mmio_clrsetbits_32((uintptr_t)&mt8183_mcucfg->mscib_dcm_en, + MCSIB_DCM_MASK, MCSIB_DCM); + /* Enable adb400 dcm */ + mmio_clrsetbits_32((uintptr_t)&mt8183_mcucfg->cci_adb400_dcm_config, + CCI_ADB400_DCM_MASK, CCI_ADB400_DCM); + /* Enable bus clock dcm */ + mmio_setbits_32((uintptr_t)&mt8183_mcucfg->cci_clk_ctrl, + MCU_BUS_DCM); + /* Enable bus fabric dcm */ + mmio_clrsetbits_32( + (uintptr_t)&mt8183_mcucfg->mcusys_bus_fabric_dcm_ctrl, + MCUSYS_BUS_FABRIC_DCM_MASK, + MCUSYS_BUS_FABRIC_DCM); + /* Enable l2c sram dcm */ + mmio_setbits_32((uintptr_t)&mt8183_mcucfg->l2c_sram_ctrl, + L2C_SRAM_DCM); + /* Enable busmp0 sync dcm */ + mmio_clrsetbits_32((uintptr_t)&mt8183_mcucfg->sync_dcm_config, + SYNC_DCM_MASK, SYNC_DCM); + /* Enable cntvalue dcm */ + mmio_setbits_32((uintptr_t)&mt8183_mcucfg->mcu_misc_dcm_ctrl, + CNTVALUEB_DCM); + /* Enable dcm cluster stall */ + mmio_clrsetbits_32( + (uintptr_t)&mt8183_mcucfg->sync_dcm_cluster_config, + MCUSYS_MAX_ACCESS_LATENCY_MASK, + MCUSYS_MAX_ACCESS_LATENCY); + mmio_setbits_32((uintptr_t)&mt8183_mcucfg->sync_dcm_cluster_config, + MCU0_SYNC_DCM_STALL_WR_EN); + /* Enable rgu dcm */ + mmio_setbits_32((uintptr_t)&mt8183_mcucfg->mp0_rgu_dcm_config, + CPUSYS_RGU_DCM_CINFIG); +} + +/******************************************************************************* + * Return a pointer to the 'entry_point_info' structure of the next image for + * the security state specified. BL33 corresponds to the non-secure image type + * while BL32 corresponds to the secure image type. A NULL pointer is returned + * if the image does not exist. + ******************************************************************************/ +entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type) +{ + entry_point_info_t *next_image_info; + + next_image_info = (type == NON_SECURE) ? &bl33_ep_info : &bl32_ep_info; + assert(next_image_info->h.type == PARAM_EP); + + /* None of the images on this platform can have 0x0 as the entrypoint */ + if (next_image_info->pc) + return next_image_info; + else + return NULL; +} + +/******************************************************************************* + * Perform any BL31 early platform setup. Here is an opportunity to copy + * parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before they + * are lost (potentially). This needs to be done before the MMU is initialized + * so that the memory layout can be used while creating page tables. + * BL2 has flushed this information to memory, so we are guaranteed to pick up + * good data. + ******************************************************************************/ +void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, + u_register_t arg2, u_register_t arg3) +{ + static console_t console; + + params_early_setup(arg1); + +#if COREBOOT + if (coreboot_serial.type) + console_16550_register(coreboot_serial.baseaddr, + coreboot_serial.input_hertz, + coreboot_serial.baud, + &console); +#else + console_16550_register(UART0_BASE, UART_CLOCK, UART_BAUDRATE, &console); +#endif + + NOTICE("MT8183 bl31_setup\n"); + + bl31_params_parse_helper(arg0, &bl32_ep_info, &bl33_ep_info); +} + + +/******************************************************************************* + * Perform any BL31 platform setup code + ******************************************************************************/ +void bl31_platform_setup(void) +{ + devapc_init(); + + emi_mpu_init(); + + platform_setup_cpu(); + generic_delay_timer_init(); + + /* Initialize the GIC driver, CPU and distributor interfaces */ + mt_gic_driver_init(); + mt_gic_init(); + + mt_systimer_init(); + + /* Init mcsi SF */ + plat_mtk_cci_init_sf(); + +#if SPMC_MODE == 1 + spmc_init(); +#endif + spm_boot_init(); + mcdi_init(); +} + +/******************************************************************************* + * Perform the very early platform specific architectural setup here. At the + * moment this is only intializes the mmu in a quick and dirty way. + ******************************************************************************/ +void bl31_plat_arch_setup(void) +{ + plat_mtk_cci_init(); + plat_mtk_cci_enable(); + + enable_scu(read_mpidr()); + + plat_configure_mmu_el3(BL_CODE_BASE, + BL_COHERENT_RAM_END - BL_CODE_BASE, + BL_CODE_BASE, + BL_CODE_END, + BL_COHERENT_RAM_BASE, + BL_COHERENT_RAM_END); +} |