diff options
Diffstat (limited to 'plat/mediatek/mt8195/drivers/spm/constraints/mt_spm_rc_bus26m.c')
-rw-r--r-- | plat/mediatek/mt8195/drivers/spm/constraints/mt_spm_rc_bus26m.c | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/plat/mediatek/mt8195/drivers/spm/constraints/mt_spm_rc_bus26m.c b/plat/mediatek/mt8195/drivers/spm/constraints/mt_spm_rc_bus26m.c new file mode 100644 index 0000000..87278d7 --- /dev/null +++ b/plat/mediatek/mt8195/drivers/spm/constraints/mt_spm_rc_bus26m.c @@ -0,0 +1,241 @@ +/* + * Copyright (c) 2021-2022, MediaTek Inc. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <arch_helpers.h> +#include <common/debug.h> + +#include <mt_lp_rm.h> +#include <mt_spm.h> +#include <mt_spm_cond.h> +#include <mt_spm_constraint.h> +#include <mt_spm_conservation.h> +#include <mt_spm_idle.h> +#include <mt_spm_internal.h> +#include <mt_spm_notifier.h> +#include <mt_spm_rc_internal.h> +#include <mt_spm_resource_req.h> +#include <mt_spm_reg.h> +#include <mt_spm_suspend.h> +#include <plat_pm.h> +#include <plat_mtk_lpm.h> + +#ifndef ATF_PLAT_CIRQ_UNSUPPORT +#include <mt_cirq.h> +#include <mt_gic_v3.h> +#endif + +#define CONSTRAINT_BUS26M_ALLOW \ + (MT_RM_CONSTRAINT_ALLOW_CPU_BUCK_OFF | \ + MT_RM_CONSTRAINT_ALLOW_DRAM_S0 | \ + MT_RM_CONSTRAINT_ALLOW_DRAM_S1 | \ + MT_RM_CONSTRAINT_ALLOW_VCORE_LP | \ + MT_RM_CONSTRAINT_ALLOW_LVTS_STATE | \ + MT_RM_CONSTRAINT_ALLOW_BUS26M_OFF) + +#define CONSTRAINT_BUS26M_PCM_FLAG \ + (SPM_FLAG_DISABLE_INFRA_PDN | \ + SPM_FLAG_DISABLE_VCORE_DVS | \ + SPM_FLAG_DISABLE_VCORE_DFS | \ + SPM_FLAG_SRAM_SLEEP_CTRL | \ + SPM_FLAG_ENABLE_TIA_WORKAROUND | \ + SPM_FLAG_ENABLE_LVTS_WORKAROUND | \ + SPM_FLAG_KEEP_CSYSPWRACK_HIGH | \ + SPM_FLAG_DISABLE_DRAMC_MCU_SRAM_SLEEP) + +#define CONSTRAINT_BUS26M_PCM_FLAG1 0U + +#define CONSTRAINT_BUS26M_RESOURCE_REQ 0U + +static unsigned int bus26m_ext_opand; +static struct mt_irqremain *refer2remain_irq; +static struct mt_spm_cond_tables cond_bus26m = { + .name = "bus26m", + .table_cg = { + 0xFFFFD408, /* MTCMOS1 */ + 0x2284C802, /* INFRA0 */ + 0x27AF8000, /* INFRA1 */ + 0x86040650, /* INFRA2 */ + 0x30038020, /* INFRA3 */ + 0x80000000, /* INFRA4 */ + 0x00080ABB, /* PERI0 */ + 0x00004000, /* VPPSYS0_0 */ + 0x08803000, /* VPPSYS0_1 */ + 0x00000000, /* VPPSYS0_2 */ + 0x80005555, /* VPPSYS1_0 */ + 0x00009008, /* VPPSYS1_1 */ + 0x60060000, /* VDOSYS0_0 */ + 0x00000000, /* VDOSYS0_1 */ + 0x201E01F8, /* VDOSYS1_0 */ + 0x00800000, /* VDOSYS1_1 */ + 0x00000000, /* VDOSYS1_2 */ + 0x00000080, /* I2C */ + }, + .table_pll = (PLL_BIT_UNIVPLL | + PLL_BIT_MFGPLL | + PLL_BIT_MSDCPLL | + PLL_BIT_TVDPLL | + PLL_BIT_MMPLL), +}; + +static struct mt_spm_cond_tables cond_bus26m_res = { + .table_cg = { 0U }, + .table_pll = 0U, +}; + +static struct constraint_status status = { + .id = MT_RM_CONSTRAINT_ID_BUS26M, + .valid = (MT_SPM_RC_VALID_SW | + MT_SPM_RC_VALID_COND_LATCH), + .cond_block = 0U, + .enter_cnt = 0U, + .cond_res = &cond_bus26m_res, +}; + +/* + * Cirq will take the place of gic when gic is off. + * However, cirq cannot work if 26m clk is turned off when system idle/suspend. + * Therefore, we need to set irq pending for specific wakeup source. + */ +#ifdef ATF_PLAT_CIRQ_UNSUPPORT +#define do_irqs_delivery() +#else +static void mt_spm_irq_remain_dump(struct mt_irqremain *irqs, + unsigned int irq_index, + struct wake_status *wakeup) +{ + INFO("[SPM] r12 = 0x%08x(0x%08x), flag = 0x%08x 0x%08x 0x%08x\n", + wakeup->tr.comm.r12, wakeup->md32pcm_wakeup_sta, + wakeup->tr.comm.debug_flag, wakeup->tr.comm.b_sw_flag0, + wakeup->tr.comm.b_sw_flag1); + + INFO("irq:%u(0x%08x) set pending\n", + irqs->wakeupsrc[irq_index], irqs->irqs[irq_index]); +} + +static void do_irqs_delivery(void) +{ + unsigned int idx; + int res = 0; + struct wake_status *wakeup = NULL; + struct mt_irqremain *irqs = refer2remain_irq; + + res = spm_conservation_get_result(&wakeup); + + if ((res != 0) && (irqs == NULL)) { + return; + } + + for (idx = 0U; idx < irqs->count; ++idx) { + if (((wakeup->tr.comm.r12 & irqs->wakeupsrc[idx]) != 0U) || + ((wakeup->raw_sta & irqs->wakeupsrc[idx]) != 0U)) { + if ((irqs->wakeupsrc_cat[idx] & + MT_IRQ_REMAIN_CAT_LOG) != 0U) { + mt_spm_irq_remain_dump(irqs, idx, wakeup); + } + + mt_irq_set_pending(irqs->irqs[idx]); + } + } +} +#endif + +static void spm_bus26m_conduct(struct spm_lp_scen *spm_lp, + unsigned int *resource_req) +{ + spm_lp->pwrctrl->pcm_flags = (uint32_t)CONSTRAINT_BUS26M_PCM_FLAG; + spm_lp->pwrctrl->pcm_flags1 = (uint32_t)CONSTRAINT_BUS26M_PCM_FLAG1; + *resource_req |= CONSTRAINT_BUS26M_RESOURCE_REQ; +} + +bool spm_is_valid_rc_bus26m(unsigned int cpu, int state_id) +{ + (void)cpu; + (void)state_id; + + return (status.cond_block == 0U) && IS_MT_RM_RC_READY(status.valid); +} + +int spm_update_rc_bus26m(int state_id, int type, const void *val) +{ + const struct mt_spm_cond_tables *tlb; + const struct mt_spm_cond_tables *tlb_check; + int res = MT_RM_STATUS_OK; + + if (val == NULL) { + return MT_RM_STATUS_BAD; + } + + if (type == PLAT_RC_UPDATE_CONDITION) { + tlb = (const struct mt_spm_cond_tables *)val; + tlb_check = (const struct mt_spm_cond_tables *)&cond_bus26m; + + status.cond_block = + mt_spm_cond_check(state_id, tlb, tlb_check, + ((status.valid & + MT_SPM_RC_VALID_COND_LATCH) != 0U) ? + &cond_bus26m_res : NULL); + } else if (type == PLAT_RC_UPDATE_REMAIN_IRQS) { + refer2remain_irq = (struct mt_irqremain *)val; + } else { + res = MT_RM_STATUS_BAD; + } + + return res; +} + +unsigned int spm_allow_rc_bus26m(int state_id) +{ + (void)state_id; + + return CONSTRAINT_BUS26M_ALLOW; +} + +int spm_run_rc_bus26m(unsigned int cpu, int state_id) +{ + (void)cpu; + +#ifndef ATF_PLAT_SPM_SSPM_NOTIFIER_UNSUPPORT + mt_spm_sspm_notify_u32(MT_SPM_NOTIFY_LP_ENTER, CONSTRAINT_BUS26M_ALLOW | + (IS_PLAT_SUSPEND_ID(state_id) ? + MT_RM_CONSTRAINT_ALLOW_AP_SUSPEND : 0U)); +#endif + if (IS_PLAT_SUSPEND_ID(state_id)) { + mt_spm_suspend_enter(state_id, + (MT_SPM_EX_OP_SET_WDT | + MT_SPM_EX_OP_HW_S1_DETECT | + MT_SPM_EX_OP_SET_SUSPEND_MODE | + bus26m_ext_opand), + CONSTRAINT_BUS26M_RESOURCE_REQ); + } else { + mt_spm_idle_generic_enter(state_id, MT_SPM_EX_OP_HW_S1_DETECT, + spm_bus26m_conduct); + } + + return 0; +} + +int spm_reset_rc_bus26m(unsigned int cpu, int state_id) +{ + unsigned int ext_op = MT_SPM_EX_OP_HW_S1_DETECT; + + (void)cpu; + +#ifndef ATF_PLAT_SPM_SSPM_NOTIFIER_UNSUPPORT + mt_spm_sspm_notify_u32(MT_SPM_NOTIFY_LP_LEAVE, 0U); +#endif + if (IS_PLAT_SUSPEND_ID(state_id)) { + ext_op |= (bus26m_ext_opand | MT_SPM_EX_OP_SET_WDT); + mt_spm_suspend_resume(state_id, ext_op, NULL); + bus26m_ext_opand = 0U; + } else { + mt_spm_idle_generic_resume(state_id, ext_op, NULL); + status.enter_cnt++; + } + + do_irqs_delivery(); + + return 0; +} |