diff options
Diffstat (limited to 'plat/nxp/soc-ls1043a/soc.def')
| -rw-r--r-- | plat/nxp/soc-ls1043a/soc.def | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/plat/nxp/soc-ls1043a/soc.def b/plat/nxp/soc-ls1043a/soc.def new file mode 100644 index 0000000..b174bd6 --- /dev/null +++ b/plat/nxp/soc-ls1043a/soc.def @@ -0,0 +1,107 @@ +# +# Copyright 2017-2021 NXP +# +# SPDX-License-Identifier: BSD-3-Clause +# +# +#------------------------------------------------------------------------------ +# +# This file contains the basic architecture definitions that drive the build +# +# ----------------------------------------------------------------------------- + +CORE_TYPE := a53 + +CACHE_LINE := 6 + +# set to GIC400 or GIC500 +GIC := GIC400 + +# set to CCI400 or CCN504 or CCN508 +INTERCONNECT := CCI400 + +# indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2 +CHASSIS := 2 + +# TZC IP Details TZC used is TZC380 or TZC400 +TZC_ID := TZC380 + +# CONSOLE Details available is NS16550 or PL011 +CONSOLE := NS16550 + +# Select the DDR PHY generation to be used +PLAT_DDR_PHY := PHY_GEN1 + +PHYS_SYS := 64 + +# ddr controller - set to MMDC or NXP +DDRCNTLR := NXP + +# ddr phy - set to NXP or SNPS +DDRPHY := NXP + +# Area of OCRAM reserved by ROM code +NXP_ROM_RSVD := 0x5900 + +# Max Size of CSF header. Required to define BL2 TEXT LIMIT in soc.def +# Input to CST create_hdr_esbc tool +CSF_HDR_SZ := 0x3000 + +# In IMAGE_BL2, compile time flag for handling Cache coherency +# with CAAM for BL2 running from OCRAM +SEC_MEM_NON_COHERENT := yes + +# OCRAM MAP +OCRAM_START_ADDR := 0x10000000 +OCRAM_SIZE := 0x20000 + +# BL2 binary is placed at start of OCRAM. +# Also used by create_pbl.mk. +BL2_BASE := 0x10000000 + +# After BL2 bin, OCRAM is used by ROM Code: +# (OCRAM_START_ADDR + BL2_BIN_SIZE) -> (NXP_ROM_RSVD - 1) + +# After ROM Code, OCRAM is used by CSF header. +# (OCRAM_START_ADDR + BL2_TEXT_LIMIT + NXP_ROM_RSVD) -> (CSF_HDR_SZ - 1) + +# BL2_HDR_LOC has to be (OCRAM_START_ADDR + OCRAM_SIZE - NXP_ROM_RSVD - CSF_HDR_SZ) +# This value should be greater than BL2_TEXT_LIMIT +# Input to CST create_hdr_isbc tool +BL2_HDR_LOC_HDR ?= $(shell echo $$(( $(OCRAM_START_ADDR) + $(OCRAM_SIZE) - $(NXP_ROM_RSVD) - $(CSF_HDR_SZ)))) +# Covert to HEX to be used by create_pbl.mk +BL2_HDR_LOC := $$(echo "obase=16; ${BL2_HDR_LOC_HDR}" | bc) + +# Core Errata +ERRATA_A53_855873 := 1 +ERRATA_A53_1530924 := 1 + +# SoC ERRATAS to be enabled +ERRATA_SOC_A008850 := 1 +ERRATA_SOC_A010539 := 1 +ERRATA_SOC_A009660 := 1 + +# DDR Errata +ERRATA_DDR_A009663 := 1 +ERRATA_DDR_A009942 := 1 + +# enable dynamic memory mapping +PLAT_XLAT_TABLES_DYNAMIC := 1 + +# Define Endianness of each module +NXP_GUR_ENDIANNESS := BE +NXP_DDR_ENDIANNESS := BE +NXP_SEC_ENDIANNESS := BE +NXP_SFP_ENDIANNESS := BE +NXP_SNVS_ENDIANNESS := BE +NXP_ESDHC_ENDIANNESS := BE +NXP_QSPI_ENDIANNESS := BE +NXP_FSPI_ENDIANNESS := BE +NXP_SCFG_ENDIANNESS := BE +NXP_GPIO_ENDIANNESS := BE +NXP_IFC_ENDIANNESS := BE + +NXP_SFP_VER := 3_2 + +# OCRAM ECC Enabled +OCRAM_ECC_EN := yes |