summaryrefslogtreecommitdiffstats
path: root/plat/nxp/soc-ls1088a/ls1088aqds
diff options
context:
space:
mode:
Diffstat (limited to 'plat/nxp/soc-ls1088a/ls1088aqds')
-rw-r--r--plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c84
-rw-r--r--plat/nxp/soc-ls1088a/ls1088aqds/plat_def.h81
-rw-r--r--plat/nxp/soc-ls1088a/ls1088aqds/platform.c28
-rw-r--r--plat/nxp/soc-ls1088a/ls1088aqds/platform.mk31
-rw-r--r--plat/nxp/soc-ls1088a/ls1088aqds/platform_def.h13
-rw-r--r--plat/nxp/soc-ls1088a/ls1088aqds/policy.h16
6 files changed, 253 insertions, 0 deletions
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c b/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c
new file mode 100644
index 0000000..b7397ba
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <ddr.h>
+#include <utils.h>
+
+#include <errata.h>
+#include <platform_def.h>
+
+#ifdef CONFIG_STATIC_DDR
+#error No static value defined
+#endif
+
+static const struct rc_timing rce[] = {
+ {U(1600), U(8), U(8)},
+ {U(1867), U(8), U(8)},
+ {U(2134), U(8), U(9)},
+ {}
+};
+
+static const struct board_timing udimm[] = {
+ {U(0x04), rce, U(0x01020307), U(0x08090b06)},
+};
+
+int ddr_board_options(struct ddr_info *priv)
+{
+ int ret;
+ struct memctl_opt *popts = &priv->opt;
+
+ if (popts->rdimm != 0) {
+ debug("RDIMM parameters not set.\n");
+ return -EINVAL;
+ }
+
+ ret = cal_board_params(priv, udimm, ARRAY_SIZE(udimm));
+ if (ret != 0) {
+ return ret;
+ }
+
+ popts->addr_hash = 1;
+ popts->cpo_sample = U(0x7b);
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+ DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
+ DDR_CDR2_VREF_TRAIN_EN |
+ DDR_CDR2_VREF_RANGE_2;
+
+ return 0;
+}
+
+long long init_ddr(void)
+{
+ int spd_addr[] = { NXP_SPD_EEPROM0 };
+ struct ddr_info info;
+ struct sysinfo sys;
+ long long dram_size;
+
+ zeromem(&sys, sizeof(sys));
+ get_clocks(&sys);
+ debug("platform clock %lu\n", sys.freq_platform);
+ debug("DDR PLL %lu\n", sys.freq_ddr_pll0);
+
+ zeromem(&info, sizeof(struct ddr_info));
+ info.num_ctlrs = NUM_OF_DDRC;
+ info.dimm_on_ctlr = DDRC_NUM_DIMM;
+ info.clk = get_ddr_freq(&sys, 0);
+ info.spd_addr = spd_addr;
+ info.ddr[0] = (void *)NXP_DDR_ADDR;
+
+ dram_size = dram_init(&info);
+ if (dram_size < 0) {
+ ERROR("DDR init failed.\n");
+ }
+
+ erratum_a008850_post();
+
+ return dram_size;
+}
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/plat_def.h b/plat/nxp/soc-ls1088a/ls1088aqds/plat_def.h
new file mode 100644
index 0000000..ebd3a26
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/plat_def.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_DEF_H
+#define PLAT_DEF_H
+
+#include <arch.h>
+/*
+ * Required without TBBR.
+ * To include the defines for DDR PHY
+ * Images.
+ */
+#include <tbbr_img_def.h>
+
+#include <policy.h>
+#include <soc.h>
+
+#define NXP_SPD_EEPROM0 0x51
+
+#define NXP_SYSCLK_FREQ 100000000
+#define NXP_DDRCLK_FREQ 100000000
+
+/* UART related definition */
+#define NXP_CONSOLE_ADDR NXP_UART_ADDR
+#define NXP_CONSOLE_BAUDRATE 115200
+
+/* Size of cacheable stacks */
+#if defined(IMAGE_BL2)
+#if defined(TRUSTED_BOARD_BOOT)
+#define PLATFORM_STACK_SIZE 0x2000
+#else
+#define PLATFORM_STACK_SIZE 0x1000
+#endif
+#elif defined(IMAGE_BL31)
+#define PLATFORM_STACK_SIZE 0x1000
+#endif
+
+#define BL2_START NXP_OCRAM_ADDR
+#define BL2_LIMIT (NXP_OCRAM_ADDR + NXP_OCRAM_SIZE)
+#define BL2_NOLOAD_START NXP_OCRAM_ADDR
+#define BL2_NOLOAD_LIMIT BL2_BASE
+
+/* IO defines as needed by IO driver framework */
+#define MAX_IO_DEVICES 4
+#define MAX_IO_BLOCK_DEVICES 1
+#define MAX_IO_HANDLES 4
+
+/*
+ * FIP image defines - Offset at which FIP Image would be present
+ * Image would include Bl31 , Bl33 and Bl32 (optional)
+ */
+#ifdef POLICY_FUSE_PROVISION
+#define MAX_FIP_DEVICES 2
+#endif
+
+#ifndef MAX_FIP_DEVICES
+#define MAX_FIP_DEVICES 1
+#endif
+
+#define BL32_IRQ_SEC_PHY_TIMER 29
+#define BL31_WDOG_SEC 89
+
+/*
+ * ID of the secure physical generic timer interrupt used by the BL32.
+ */
+#define PLAT_LS_G1S_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_LEVEL)
+
+/* SGI 15 and Secure watchdog interrupts assigned to Group 0 */
+#define PLAT_LS_G0_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(BL31_WDOG_SEC, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(15, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_LEVEL)
+
+
+#endif /* PLAT_DEF_H */
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/platform.c b/plat/nxp/soc-ls1088a/ls1088aqds/platform.c
new file mode 100644
index 0000000..8b3eada
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/platform.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat_common.h>
+
+#pragma weak board_enable_povdd
+#pragma weak board_disable_povdd
+
+bool board_enable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+ return true;
+#else
+ return false;
+#endif
+}
+
+bool board_disable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+ return true;
+#else
+ return false;
+#endif
+}
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/platform.mk b/plat/nxp/soc-ls1088a/ls1088aqds/platform.mk
new file mode 100644
index 0000000..97ccf26
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/platform.mk
@@ -0,0 +1,31 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# board-specific build parameters
+BOOT_MODE ?= qspi
+BOARD := ls1088aqds
+
+# DDR Compilation Configs
+NUM_OF_DDRC := 1
+DDRC_NUM_DIMM := 1
+DDR_ECC_EN := yes
+
+# On-Board Flash Details
+QSPI_FLASH_SZ := 0x4000000
+NOR_FLASH_SZ := 0x20000000
+
+BL2_SOURCES += ${BOARD_PATH}/ddr_init.c \
+ ${BOARD_PATH}/platform.c
+
+SUPPORTED_BOOT_MODE := qspi \
+ sd \
+ nor
+
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Adding SoC build info
+include plat/nxp/soc-ls1088a/soc.mk
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/platform_def.h b/plat/nxp/soc-ls1088a/ls1088aqds/platform_def.h
new file mode 100644
index 0000000..7daf1c0
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/platform_def.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <plat_def.h>
+#include <plat_default_def.h>
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/policy.h b/plat/nxp/soc-ls1088a/ls1088aqds/policy.h
new file mode 100644
index 0000000..0eaafae
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/policy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef POLICY_H
+#define POLICY_H
+
+/*
+ * Set this to 0x0 to leave the default SMMU page size in sACR
+ * Set this to 0x1 to change the SMMU page size to 64K
+ */
+#define POLICY_SMMU_PAGESZ_64K 0x1
+
+#endif /* POLICY_H */