diff options
Diffstat (limited to '')
| -rw-r--r-- | plat/rockchip/rk3399/drivers/dram/dram_spec_timing.h | 507 |
1 files changed, 507 insertions, 0 deletions
diff --git a/plat/rockchip/rk3399/drivers/dram/dram_spec_timing.h b/plat/rockchip/rk3399/drivers/dram/dram_spec_timing.h new file mode 100644 index 0000000..9cda22c --- /dev/null +++ b/plat/rockchip/rk3399/drivers/dram/dram_spec_timing.h @@ -0,0 +1,507 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef DRAM_SPEC_TIMING_H +#define DRAM_SPEC_TIMING_H + +#include <stdint.h> + +enum ddr3_speed_rate { + /* 5-5-5 */ + DDR3_800D = 0, + /* 6-6-6 */ + DDR3_800E = 1, + /* 6-6-6 */ + DDR3_1066E = 2, + /* 7-7-7 */ + DDR3_1066F = 3, + /* 8-8-8 */ + DDR3_1066G = 4, + /* 7-7-7 */ + DDR3_1333F = 5, + /* 8-8-8 */ + DDR3_1333G = 6, + /* 9-9-9 */ + DDR3_1333H = 7, + /* 10-10-10 */ + DDR3_1333J = 8, + /* 8-8-8 */ + DDR3_1600G = 9, + /* 9-9-9 */ + DDR3_1600H = 10, + /* 10-10-10 */ + DDR3_1600J = 11, + /* 11-11-11 */ + DDR3_1600K = 12, + /* 10-10-10 */ + DDR3_1866J = 13, + /* 11-11-11 */ + DDR3_1866K = 14, + /* 12-12-12 */ + DDR3_1866L = 15, + /* 13-13-13 */ + DDR3_1866M = 16, + /* 11-11-11 */ + DDR3_2133K = 17, + /* 12-12-12 */ + DDR3_2133L = 18, + /* 13-13-13 */ + DDR3_2133M = 19, + /* 14-14-14 */ + DDR3_2133N = 20, + DDR3_DEFAULT = 21, +}; + +#define max(a, b) (((a) > (b)) ? (a) : (b)) +#define range(mi, val, ma) (((ma) > (val)) ? (max(mi, val)) : (ma)) + +struct dram_timing_t { + /* unit MHz */ + uint32_t mhz; + /* some timing unit is us */ + uint32_t tinit1; + uint32_t tinit2; + uint32_t tinit3; + uint32_t tinit4; + uint32_t tinit5; + /* reset low, DDR3:200us */ + uint32_t trstl; + /* reset high to CKE high, DDR3:500us */ + uint32_t trsth; + uint32_t trefi; + /* base */ + uint32_t trcd; + /* trp per bank */ + uint32_t trppb; + /* trp all bank */ + uint32_t trp; + uint32_t twr; + uint32_t tdal; + uint32_t trtp; + uint32_t trc; + uint32_t trrd; + uint32_t tccd; + uint32_t twtr; + uint32_t trtw; + uint32_t tras_max; + uint32_t tras_min; + uint32_t tfaw; + uint32_t trfc; + uint32_t tdqsck; + uint32_t tdqsck_max; + /* pd or sr */ + uint32_t txsr; + uint32_t txsnr; + uint32_t txp; + uint32_t txpdll; + uint32_t tdllk; + uint32_t tcke; + uint32_t tckesr; + uint32_t tcksre; + uint32_t tcksrx; + uint32_t tdpd; + /* mode regiter timing */ + uint32_t tmod; + uint32_t tmrd; + uint32_t tmrr; + uint32_t tmrri; + /* ODT */ + uint32_t todton; + /* ZQ */ + uint32_t tzqinit; + uint32_t tzqcs; + uint32_t tzqoper; + uint32_t tzqreset; + /* Write Leveling */ + uint32_t twlmrd; + uint32_t twlo; + uint32_t twldqsen; + /* CA Training */ + uint32_t tcackel; + uint32_t tcaent; + uint32_t tcamrd; + uint32_t tcackeh; + uint32_t tcaext; + uint32_t tadr; + uint32_t tmrz; + uint32_t tcacd; + /* mode register */ + uint32_t mr[4]; + uint32_t mr11; + /* lpddr4 spec */ + uint32_t mr12; + uint32_t mr13; + uint32_t mr14; + uint32_t mr16; + uint32_t mr17; + uint32_t mr20; + uint32_t mr22; + uint32_t tccdmw; + uint32_t tppd; + uint32_t tescke; + uint32_t tsr; + uint32_t tcmdcke; + uint32_t tcscke; + uint32_t tckelcs; + uint32_t tcsckeh; + uint32_t tckehcs; + uint32_t tmrwckel; + uint32_t tzqcal; + uint32_t tzqlat; + uint32_t tzqcke; + uint32_t tvref_long; + uint32_t tvref_short; + uint32_t tvrcg_enable; + uint32_t tvrcg_disable; + uint32_t tfc_long; + uint32_t tckfspe; + uint32_t tckfspx; + uint32_t tckehcmd; + uint32_t tckelcmd; + uint32_t tckelpd; + uint32_t tckckel; + /* other */ + uint32_t al; + uint32_t cl; + uint32_t cwl; + uint32_t bl; +}; + +struct dram_info_t { + /* speed_rate only used when DDR3 */ + enum ddr3_speed_rate speed_rate; + /* 1: use CS0, 2: use CS0 and CS1 */ + uint32_t cs_cnt; + /* give the max per-die capability on each rank/cs */ + uint32_t per_die_capability[2]; +}; + +struct timing_related_config { + struct dram_info_t dram_info[2]; + uint32_t dram_type; + /* MHz */ + uint32_t freq; + uint32_t ch_cnt; + uint32_t bl; + /* 1:auto precharge, 0:never auto precharge */ + uint32_t ap; + /* + * 1:dll bypass, 0:dll normal + * dram and controller dll bypass at the same time + */ + uint32_t dllbp; + /* 1:odt enable, 0:odt disable */ + uint32_t odt; + /* 1:enable, 0:disabe */ + uint32_t rdbi; + uint32_t wdbi; + /* dram driver strength */ + uint32_t dramds; + /* dram ODT, if odt=0, this parameter invalid */ + uint32_t dramodt; + /* + * ca ODT, if odt=0, this parameter invalid + * it only used by LPDDR4 + */ + uint32_t caodt; +}; + +/* mr0 for ddr3 */ +#define DDR3_BL8 (0) +#define DDR3_BC4_8 (1) +#define DDR3_BC4 (2) +#define DDR3_CL(n) (((((n) - 4) & 0x7) << 4)\ + | ((((n) - 4) & 0x8) >> 1)) +#define DDR3_WR(n) (((n) & 0x7) << 9) +#define DDR3_DLL_RESET (1 << 8) +#define DDR3_DLL_DERESET (0 << 8) + +/* mr1 for ddr3 */ +#define DDR3_DLL_ENABLE (0) +#define DDR3_DLL_DISABLE (1) +#define DDR3_MR1_AL(n) (((n) & 0x3) << 3) + +#define DDR3_DS_40 (0) +#define DDR3_DS_34 (1 << 1) +#define DDR3_RTT_NOM_DIS (0) +#define DDR3_RTT_NOM_60 (1 << 2) +#define DDR3_RTT_NOM_120 (1 << 6) +#define DDR3_RTT_NOM_40 ((1 << 2) | (1 << 6)) +#define DDR3_TDQS (1 << 11) + +/* mr2 for ddr3 */ +#define DDR3_MR2_CWL(n) ((((n) - 5) & 0x7) << 3) +#define DDR3_RTT_WR_DIS (0) +#define DDR3_RTT_WR_60 (1 << 9) +#define DDR3_RTT_WR_120 (2 << 9) + +/* + * MR0 (Device Information) + * 0:DAI complete, 1:DAI still in progress + */ +#define LPDDR2_DAI (0x1) +/* 0:S2 or S4 SDRAM, 1:NVM */ +#define LPDDR2_DI (0x1 << 1) +/* 0:DNV not supported, 1:DNV supported */ +#define LPDDR2_DNVI (0x1 << 2) +#define LPDDR2_RZQI (0x3 << 3) + +/* + * 00:RZQ self test not supported, + * 01:ZQ-pin may connect to VDDCA or float + * 10:ZQ-pin may short to GND. + * 11:ZQ-pin self test completed, no error condition detected. + */ + +/* MR1 (Device Feature) */ +#define LPDDR2_BL4 (0x2) +#define LPDDR2_BL8 (0x3) +#define LPDDR2_BL16 (0x4) +#define LPDDR2_N_WR(n) (((n) - 2) << 5) + +/* MR2 (Device Feature 2) */ +#define LPDDR2_RL3_WL1 (0x1) +#define LPDDR2_RL4_WL2 (0x2) +#define LPDDR2_RL5_WL2 (0x3) +#define LPDDR2_RL6_WL3 (0x4) +#define LPDDR2_RL7_WL4 (0x5) +#define LPDDR2_RL8_WL4 (0x6) + +/* MR3 (IO Configuration 1) */ +#define LPDDR2_DS_34 (0x1) +#define LPDDR2_DS_40 (0x2) +#define LPDDR2_DS_48 (0x3) +#define LPDDR2_DS_60 (0x4) +#define LPDDR2_DS_80 (0x6) +/* optional */ +#define LPDDR2_DS_120 (0x7) + +/* MR4 (Device Temperature) */ +#define LPDDR2_TREF_MASK (0x7) +#define LPDDR2_4_TREF (0x1) +#define LPDDR2_2_TREF (0x2) +#define LPDDR2_1_TREF (0x3) +#define LPDDR2_025_TREF (0x5) +#define LPDDR2_025_TREF_DERATE (0x6) + +#define LPDDR2_TUF (0x1 << 7) + +/* MR8 (Basic configuration 4) */ +#define LPDDR2_S4 (0x0) +#define LPDDR2_S2 (0x1) +#define LPDDR2_N (0x2) +/* Unit:MB */ +#define LPDDR2_DENSITY(mr8) (8 << (((mr8) >> 2) & 0xf)) +#define LPDDR2_IO_WIDTH(mr8) (32 >> (((mr8) >> 6) & 0x3)) + +/* MR10 (Calibration) */ +#define LPDDR2_ZQINIT (0xff) +#define LPDDR2_ZQCL (0xab) +#define LPDDR2_ZQCS (0x56) +#define LPDDR2_ZQRESET (0xc3) + +/* MR16 (PASR Bank Mask), S2 SDRAM Only */ +#define LPDDR2_PASR_FULL (0x0) +#define LPDDR2_PASR_1_2 (0x1) +#define LPDDR2_PASR_1_4 (0x2) +#define LPDDR2_PASR_1_8 (0x3) + +/* + * MR0 (Device Information) + * 0:DAI complete, + * 1:DAI still in progress + */ +#define LPDDR3_DAI (0x1) +/* + * 00:RZQ self test not supported, + * 01:ZQ-pin may connect to VDDCA or float + * 10:ZQ-pin may short to GND. + * 11:ZQ-pin self test completed, no error condition detected. + */ +#define LPDDR3_RZQI (0x3 << 3) +/* + * 0:DRAM does not support WL(Set B), + * 1:DRAM support WL(Set B) + */ +#define LPDDR3_WL_SUPOT (1 << 6) +/* + * 0:DRAM does not support RL=3,nWR=3,WL=1; + * 1:DRAM supports RL=3,nWR=3,WL=1 for frequencies <=166 + */ +#define LPDDR3_RL3_SUPOT (1 << 7) + +/* MR1 (Device Feature) */ +#define LPDDR3_BL8 (0x3) +#define LPDDR3_N_WR(n) ((n) << 5) + +/* MR2 (Device Feature 2), WL Set A,default */ +/* <=166MHz,optional*/ +#define LPDDR3_RL3_WL1 (0x1) +/* <=400MHz*/ +#define LPDDR3_RL6_WL3 (0x4) +/* <=533MHz*/ +#define LPDDR3_RL8_WL4 (0x6) +/* <=600MHz*/ +#define LPDDR3_RL9_WL5 (0x7) +/* <=667MHz,default*/ +#define LPDDR3_RL10_WL6 (0x8) +/* <=733MHz*/ +#define LPDDR3_RL11_WL6 (0x9) +/* <=800MHz*/ +#define LPDDR3_RL12_WL6 (0xa) +/* <=933MHz*/ +#define LPDDR3_RL14_WL8 (0xc) +/* <=1066MHz*/ +#define LPDDR3_RL16_WL8 (0xe) + +/* WL Set B, optional */ +/* <=667MHz,default*/ +#define LPDDR3_RL10_WL8 (0x8) +/* <=733MHz*/ +#define LPDDR3_RL11_WL9 (0x9) +/* <=800MHz*/ +#define LPDDR3_RL12_WL9 (0xa) +/* <=933MHz*/ +#define LPDDR3_RL14_WL11 (0xc) +/* <=1066MHz*/ +#define LPDDR3_RL16_WL13 (0xe) + +/* 1:enable nWR programming > 9(default)*/ +#define LPDDR3_N_WRE (1 << 4) +/* 1:Select WL Set B*/ +#define LPDDR3_WL_S (1 << 6) +/* 1:enable*/ +#define LPDDR3_WR_LEVEL (1 << 7) + +/* MR3 (IO Configuration 1) */ +#define LPDDR3_DS_34 (0x1) +#define LPDDR3_DS_40 (0x2) +#define LPDDR3_DS_48 (0x3) +#define LPDDR3_DS_60 (0x4) +#define LPDDR3_DS_80 (0x6) +#define LPDDR3_DS_34D_40U (0x9) +#define LPDDR3_DS_40D_48U (0xa) +#define LPDDR3_DS_34D_48U (0xb) + +/* MR4 (Device Temperature) */ +#define LPDDR3_TREF_MASK (0x7) +/* SDRAM Low temperature operating limit exceeded */ +#define LPDDR3_LT_EXED (0x0) +#define LPDDR3_4_TREF (0x1) +#define LPDDR3_2_TREF (0x2) +#define LPDDR3_1_TREF (0x3) +#define LPDDR3_05_TREF (0x4) +#define LPDDR3_025_TREF (0x5) +#define LPDDR3_025_TREF_DERATE (0x6) +/* SDRAM High temperature operating limit exceeded */ +#define LPDDR3_HT_EXED (0x7) + +/* 1:value has changed since last read of MR4 */ +#define LPDDR3_TUF (0x1 << 7) + +/* MR8 (Basic configuration 4) */ +#define LPDDR3_S8 (0x3) +#define LPDDR3_DENSITY(mr8) (8 << (((mr8) >> 2) & 0xf)) +#define LPDDR3_IO_WIDTH(mr8) (32 >> (((mr8) >> 6) & 0x3)) + +/* MR10 (Calibration) */ +#define LPDDR3_ZQINIT (0xff) +#define LPDDR3_ZQCL (0xab) +#define LPDDR3_ZQCS (0x56) +#define LPDDR3_ZQRESET (0xc3) + +/* MR11 (ODT Control) */ +#define LPDDR3_ODT_60 (1) +#define LPDDR3_ODT_120 (2) +#define LPDDR3_ODT_240 (3) +#define LPDDR3_ODT_DIS (0) + +/* MR2 (Device Feature 2) */ +/* RL & nRTP for DBI-RD Disabled */ +#define LPDDR4_RL6_NRTP8 (0x0) +#define LPDDR4_RL10_NRTP8 (0x1) +#define LPDDR4_RL14_NRTP8 (0x2) +#define LPDDR4_RL20_NRTP8 (0x3) +#define LPDDR4_RL24_NRTP10 (0x4) +#define LPDDR4_RL28_NRTP12 (0x5) +#define LPDDR4_RL32_NRTP14 (0x6) +#define LPDDR4_RL36_NRTP16 (0x7) +/* RL & nRTP for DBI-RD Disabled */ +#define LPDDR4_RL12_NRTP8 (0x1) +#define LPDDR4_RL16_NRTP8 (0x2) +#define LPDDR4_RL22_NRTP8 (0x3) +#define LPDDR4_RL28_NRTP10 (0x4) +#define LPDDR4_RL32_NRTP12 (0x5) +#define LPDDR4_RL36_NRTP14 (0x6) +#define LPDDR4_RL40_NRTP16 (0x7) +/* WL Set A,default */ +#define LPDDR4_A_WL4 (0x0) +#define LPDDR4_A_WL6 (0x1) +#define LPDDR4_A_WL8 (0x2) +#define LPDDR4_A_WL10 (0x3) +#define LPDDR4_A_WL12 (0x4) +#define LPDDR4_A_WL14 (0x5) +#define LPDDR4_A_WL16 (0x6) +#define LPDDR4_A_WL18 (0x7) +/* WL Set B, optional */ +#define LPDDR4_B_WL4 (0x0 << 3) +#define LPDDR4_B_WL8 (0x1 << 3) +#define LPDDR4_B_WL12 (0x2 << 3) +#define LPDDR4_B_WL18 (0x3 << 3) +#define LPDDR4_B_WL22 (0x4 << 3) +#define LPDDR4_B_WL26 (0x5 << 3) +#define LPDDR4_B_WL30 (0x6 << 3) +#define LPDDR4_B_WL34 (0x7 << 3) +/* 1:Select WL Set B*/ +#define LPDDR4_WL_B (1 << 6) +/* 1:enable*/ +#define LPDDR4_WR_LEVEL (1 << 7) + +/* MR3 */ +#define LPDDR4_VDDQ_2_5 (0) +#define LPDDR4_VDDQ_3 (1) +#define LPDDR4_WRPST_0_5_TCK (0 << 1) +#define LPDDR4_WRPST_1_5_TCK (1 << 1) +#define LPDDR4_PPR_EN (1 << 2) +/* PDDS */ +#define LPDDR4_PDDS_240 (0x1 << 3) +#define LPDDR4_PDDS_120 (0x2 << 3) +#define LPDDR4_PDDS_80 (0x3 << 3) +#define LPDDR4_PDDS_60 (0x4 << 3) +#define LPDDR4_PDDS_48 (0x5 << 3) +#define LPDDR4_PDDS_40 (0x6 << 3) +#define LPDDR4_DBI_RD_EN (1 << 6) +#define LPDDR4_DBI_WR_EN (1 << 7) + +/* MR11 (ODT Control) */ +#define LPDDR4_DQODT_240 (1) +#define LPDDR4_DQODT_120 (2) +#define LPDDR4_DQODT_80 (3) +#define LPDDR4_DQODT_60 (4) +#define LPDDR4_DQODT_48 (5) +#define LPDDR4_DQODT_40 (6) +#define LPDDR4_DQODT_DIS (0) +#define LPDDR4_CAODT_240 (1 << 4) +#define LPDDR4_CAODT_120 (2 << 4) +#define LPDDR4_CAODT_80 (3 << 4) +#define LPDDR4_CAODT_60 (4 << 4) +#define LPDDR4_CAODT_48 (5 << 4) +#define LPDDR4_CAODT_40 (6 << 4) +#define LPDDR4_CAODT_DIS (0 << 4) + +/* + * Description: depend on input parameter "timing_config", + * and calculate correspond "dram_type" + * spec timing to "pdram_timing" + * parameters: + * input: timing_config + * output: pdram_timing + * NOTE: MR ODT is set, need to disable by controller + */ +void dram_get_parameter(struct timing_related_config *timing_config, + struct dram_timing_t *pdram_timing); + +#endif /* DRAM_SPEC_TIMING_H */ |