1 files changed, 113 insertions, 0 deletions
diff --git a/plat/ti/k3/common/k3_gicv3.c b/plat/ti/k3/common/k3_gicv3.c
new file mode 100644
index 0000000..0199822
--- /dev/null
+++ b/plat/ti/k3/common/k3_gicv3.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <assert.h>
+#include <common/bl_common.h>
+#include <common/interrupt_props.h>
+#include <drivers/arm/gicv3.h>
+#include <lib/utils.h>
+#include <lib/mmio.h>
+#include <plat/common/platform.h>
+
+#include <k3_gicv3.h>
+
+/* The GICv3 driver only needs to be initialized in EL3 */
+uintptr_t rdistif_base_addrs[PLATFORM_CORE_COUNT];
+
+#if K3_PM_SYSTEM_SUSPEND
+static gicv3_redist_ctx_t rdist_ctx[PLATFORM_CORE_COUNT];
+static gicv3_dist_ctx_t dist_ctx;
+#endif
+
+static const interrupt_prop_t k3_interrupt_props[] = {
+	PLAT_ARM_G1S_IRQ_PROPS(INTR_GROUP1S),
+	PLAT_ARM_G0_IRQ_PROPS(INTR_GROUP0)
+};
+
+static unsigned int k3_mpidr_to_core_pos(unsigned long mpidr)
+{
+	return (unsigned int)plat_core_pos_by_mpidr(mpidr);
+}
+
+gicv3_driver_data_t k3_gic_data = {
+	.rdistif_num = PLATFORM_CORE_COUNT,
+	.rdistif_base_addrs = rdistif_base_addrs,
+	.interrupt_props = k3_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(k3_interrupt_props),
+	.mpidr_to_core_pos = k3_mpidr_to_core_pos,
+};
+
+void k3_gic_driver_init(uintptr_t gic_base)
+{
+	/* GIC Distributor is always at the base of the IP */
+	uintptr_t gicd_base = gic_base;
+	/* GIC Redistributor base is run-time detected */
+	uintptr_t gicr_base = 0;
+
+	for (unsigned int gicr_shift = 18; gicr_shift < 21; gicr_shift++) {
+		uintptr_t gicr_check = gic_base + BIT(gicr_shift);
+		uint32_t iidr = mmio_read_32(gicr_check + GICR_IIDR);
+		if (iidr != 0) {
+			/* Found the GICR base */
+			gicr_base = gicr_check;
+			break;
+		}
+	}
+	/* Assert if we have not found the GICR base */
+	assert(gicr_base != 0);
+
+	/*
+	 * The GICv3 driver is initialized in EL3 and does not need
+	 * to be initialized again in SEL1. This is because the S-EL1
+	 * can use GIC system registers to manage interrupts and does
+	 * not need GIC interface base addresses to be configured.
+	 */
+	k3_gic_data.gicd_base = gicd_base;
+	k3_gic_data.gicr_base = gicr_base;
+	gicv3_driver_init(&k3_gic_data);
+}
+
+void k3_gic_init(void)
+{
+	gicv3_distif_init();
+	gicv3_rdistif_init(plat_my_core_pos());
+	gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+void k3_gic_cpuif_enable(void)
+{
+	gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+void k3_gic_cpuif_disable(void)
+{
+	gicv3_cpuif_disable(plat_my_core_pos());
+}
+
+void k3_gic_pcpu_init(void)
+{
+	gicv3_rdistif_init(plat_my_core_pos());
+}
+
+#if K3_PM_SYSTEM_SUSPEND
+void k3_gic_save_context(void)
+{
+	for (unsigned int i = 0U; i < PLATFORM_CORE_COUNT; i++) {
+		gicv3_rdistif_save(i, &rdist_ctx[i]);
+	}
+	gicv3_distif_save(&dist_ctx);
+}
+
+void k3_gic_restore_context(void)
+{
+	gicv3_distif_init_restore(&dist_ctx);
+	for (unsigned int i = 0U; i < PLATFORM_CORE_COUNT; i++) {
+		gicv3_rdistif_init_restore(i, &rdist_ctx[i]);
+	}
+}
+#endif