From 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 28 Apr 2024 11:13:47 +0200
Subject: Adding upstream version 2.8.0+dfsg.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 bl2/aarch32/bl2_entrypoint.S | 136 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 136 insertions(+)
 create mode 100644 bl2/aarch32/bl2_entrypoint.S

(limited to 'bl2/aarch32/bl2_entrypoint.S')

diff --git a/bl2/aarch32/bl2_entrypoint.S b/bl2/aarch32/bl2_entrypoint.S
new file mode 100644
index 0000000..678d9c2
--- /dev/null
+++ b/bl2/aarch32/bl2_entrypoint.S
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2016-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <common/bl_common.h>
+
+	.globl	bl2_vector_table
+	.globl	bl2_entrypoint
+
+
+vector_base bl2_vector_table
+	b	bl2_entrypoint
+	b	report_exception	/* Undef */
+	b	report_exception	/* SVC call */
+	b	report_prefetch_abort	/* Prefetch abort */
+	b	report_data_abort	/* Data abort */
+	b	report_exception	/* Reserved */
+	b	report_exception	/* IRQ */
+	b	report_exception	/* FIQ */
+
+
+func bl2_entrypoint
+	/*---------------------------------------------
+	 * Save arguments x0 - x3 from BL1 for future
+	 * use.
+	 * ---------------------------------------------
+	 */
+	mov	r9, r0
+	mov	r10, r1
+	mov	r11, r2
+	mov	r12, r3
+
+	/* ---------------------------------------------
+	 * Set the exception vector to something sane.
+	 * ---------------------------------------------
+	 */
+	ldr	r0, =bl2_vector_table
+	stcopr	r0, VBAR
+	isb
+
+	/* --------------------------------------------------------
+	 * Enable the instruction cache - disable speculative loads
+	 * --------------------------------------------------------
+	 */
+	ldcopr	r0, SCTLR
+	orr	r0, r0, #SCTLR_I_BIT
+	bic	r0, r0, #SCTLR_DSSBS_BIT
+	stcopr	r0, SCTLR
+	isb
+
+	/* ---------------------------------------------
+	 * Since BL2 executes after BL1, it is assumed
+	 * here that BL1 has already has done the
+	 * necessary register initializations.
+	 * ---------------------------------------------
+	 */
+
+	/* ---------------------------------------------
+	 * Invalidate the RW memory used by the BL2
+	 * image. This includes the data and NOBITS
+	 * sections. This is done to safeguard against
+	 * possible corruption of this memory by dirty
+	 * cache lines in a system cache as a result of
+	 * use by an earlier boot loader stage.
+	 * ---------------------------------------------
+	 */
+	ldr	r0, =__RW_START__
+	ldr	r1, =__RW_END__
+	sub	r1, r1, r0
+	bl	inv_dcache_range
+
+	/* ---------------------------------------------
+	 * Zero out NOBITS sections. There are 2 of them:
+	 *   - the .bss section;
+	 *   - the coherent memory section.
+	 * ---------------------------------------------
+	 */
+	ldr	r0, =__BSS_START__
+	ldr	r1, =__BSS_END__
+	sub 	r1, r1, r0
+	bl	zeromem
+
+#if USE_COHERENT_MEM
+	ldr	r0, =__COHERENT_RAM_START__
+	ldr	r1, =__COHERENT_RAM_END_UNALIGNED__
+	sub 	r1, r1, r0
+	bl	zeromem
+#endif
+
+	/* --------------------------------------------
+	 * Allocate a stack whose memory will be marked
+	 * as Normal-IS-WBWA when the MMU is enabled.
+	 * There is no risk of reading stale stack
+	 * memory after enabling the MMU as only the
+	 * primary cpu is running at the moment.
+	 * --------------------------------------------
+	 */
+	bl	plat_set_my_stack
+
+	/* ---------------------------------------------
+	 * Initialize the stack protector canary before
+	 * any C code is called.
+	 * ---------------------------------------------
+	 */
+#if STACK_PROTECTOR_ENABLED
+	bl	update_stack_protector_canary
+#endif
+
+	/* ---------------------------------------------
+	 * Perform BL2 setup
+	 * ---------------------------------------------
+	 */
+	mov	r0, r9
+	mov	r1, r10
+	mov	r2, r11
+	mov	r3, r12
+
+	bl	bl2_setup
+
+	/* ---------------------------------------------
+	 * Jump to main function.
+	 * ---------------------------------------------
+	 */
+	bl	bl2_main
+
+	/* ---------------------------------------------
+	 * Should never reach this point.
+	 * ---------------------------------------------
+	 */
+	no_ret	plat_panic_handler
+
+endfunc bl2_entrypoint
-- 
cgit v1.2.3