From 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 28 Apr 2024 11:13:47 +0200
Subject: Adding upstream version 2.8.0+dfsg.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 bl2/bl2_main.c | 149 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 149 insertions(+)
 create mode 100644 bl2/bl2_main.c

(limited to 'bl2/bl2_main.c')

diff --git a/bl2/bl2_main.c b/bl2/bl2_main.c
new file mode 100644
index 0000000..5da8037
--- /dev/null
+++ b/bl2/bl2_main.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2013-2022, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch_helpers.h>
+#include <arch_features.h>
+#include <bl1/bl1.h>
+#include <bl2/bl2.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/auth/auth_mod.h>
+#include <drivers/auth/crypto_mod.h>
+#include <drivers/console.h>
+#include <drivers/fwu/fwu.h>
+#include <lib/extensions/pauth.h>
+#include <plat/common/platform.h>
+
+#include "bl2_private.h"
+
+#ifdef __aarch64__
+#define NEXT_IMAGE	"BL31"
+#else
+#define NEXT_IMAGE	"BL32"
+#endif
+
+#if BL2_AT_EL3
+/*******************************************************************************
+ * Setup function for BL2 when BL2_AT_EL3=1
+ ******************************************************************************/
+void bl2_el3_setup(u_register_t arg0, u_register_t arg1, u_register_t arg2,
+		   u_register_t arg3)
+{
+	/* Perform early platform-specific setup */
+	bl2_el3_early_platform_setup(arg0, arg1, arg2, arg3);
+
+	/* Perform late platform-specific setup */
+	bl2_el3_plat_arch_setup();
+
+#if CTX_INCLUDE_PAUTH_REGS
+	/*
+	 * Assert that the ARMv8.3-PAuth registers are present or an access
+	 * fault will be triggered when they are being saved or restored.
+	 */
+	assert(is_armv8_3_pauth_present());
+#endif /* CTX_INCLUDE_PAUTH_REGS */
+}
+#else /* BL2_AT_EL3 */
+/*******************************************************************************
+ * Setup function for BL2 when BL2_AT_EL3=0
+ ******************************************************************************/
+void bl2_setup(u_register_t arg0, u_register_t arg1, u_register_t arg2,
+	       u_register_t arg3)
+{
+	/* Perform early platform-specific setup */
+	bl2_early_platform_setup2(arg0, arg1, arg2, arg3);
+
+	/* Perform late platform-specific setup */
+	bl2_plat_arch_setup();
+
+#if CTX_INCLUDE_PAUTH_REGS
+	/*
+	 * Assert that the ARMv8.3-PAuth registers are present or an access
+	 * fault will be triggered when they are being saved or restored.
+	 */
+	assert(is_armv8_3_pauth_present());
+#endif /* CTX_INCLUDE_PAUTH_REGS */
+}
+#endif /* BL2_AT_EL3 */
+
+/*******************************************************************************
+ * The only thing to do in BL2 is to load further images and pass control to
+ * next BL. The memory occupied by BL2 will be reclaimed by BL3x stages. BL2
+ * runs entirely in S-EL1.
+ ******************************************************************************/
+void bl2_main(void)
+{
+	entry_point_info_t *next_bl_ep_info;
+
+	NOTICE("BL2: %s\n", version_string);
+	NOTICE("BL2: %s\n", build_message);
+
+	/* Perform remaining generic architectural setup in S-EL1 */
+	bl2_arch_setup();
+
+#if PSA_FWU_SUPPORT
+	fwu_init();
+#endif /* PSA_FWU_SUPPORT */
+
+	crypto_mod_init();
+
+	/* Initialize authentication module */
+	auth_mod_init();
+
+	/* Initialize the Measured Boot backend */
+	bl2_plat_mboot_init();
+
+	/* Initialize boot source */
+	bl2_plat_preload_setup();
+
+	/* Load the subsequent bootloader images. */
+	next_bl_ep_info = bl2_load_images();
+
+	/* Teardown the Measured Boot backend */
+	bl2_plat_mboot_finish();
+
+#if !BL2_AT_EL3 && !ENABLE_RME
+#ifndef __aarch64__
+	/*
+	 * For AArch32 state BL1 and BL2 share the MMU setup.
+	 * Given that BL2 does not map BL1 regions, MMU needs
+	 * to be disabled in order to go back to BL1.
+	 */
+	disable_mmu_icache_secure();
+#endif /* !__aarch64__ */
+
+	console_flush();
+
+#if ENABLE_PAUTH
+	/*
+	 * Disable pointer authentication before running next boot image
+	 */
+	pauth_disable_el1();
+#endif /* ENABLE_PAUTH */
+
+	/*
+	 * Run next BL image via an SMC to BL1. Information on how to pass
+	 * control to the BL32 (if present) and BL33 software images will
+	 * be passed to next BL image as an argument.
+	 */
+	smc(BL1_SMC_RUN_IMAGE, (unsigned long)next_bl_ep_info, 0, 0, 0, 0, 0, 0);
+#else /* if BL2_AT_EL3 || ENABLE_RME */
+	NOTICE("BL2: Booting " NEXT_IMAGE "\n");
+	print_entry_point_info(next_bl_ep_info);
+	console_flush();
+
+#if ENABLE_PAUTH
+	/*
+	 * Disable pointer authentication before running next boot image
+	 */
+	pauth_disable_el3();
+#endif /* ENABLE_PAUTH */
+
+	bl2_run_next_image(next_bl_ep_info);
+#endif /* BL2_AT_EL3 && ENABLE_RME */
+}
-- 
cgit v1.2.3