From 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:13:47 +0200 Subject: Adding upstream version 2.8.0+dfsg. Signed-off-by: Daniel Baumann --- drivers/marvell/mochi/ap807_setup.c | 339 +++++++++++++++++++++++++ drivers/marvell/mochi/apn806_setup.c | 297 ++++++++++++++++++++++ drivers/marvell/mochi/cp110_setup.c | 467 +++++++++++++++++++++++++++++++++++ 3 files changed, 1103 insertions(+) create mode 100644 drivers/marvell/mochi/ap807_setup.c create mode 100644 drivers/marvell/mochi/apn806_setup.c create mode 100644 drivers/marvell/mochi/cp110_setup.c (limited to 'drivers/marvell/mochi') diff --git a/drivers/marvell/mochi/ap807_setup.c b/drivers/marvell/mochi/ap807_setup.c new file mode 100644 index 0000000..75e9654 --- /dev/null +++ b/drivers/marvell/mochi/ap807_setup.c @@ -0,0 +1,339 @@ +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +/* AP807 Marvell SoC driver */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define SMMU_sACR (MVEBU_SMMU_BASE + 0x10) +#define SMMU_sACR_PG_64K (1 << 16) + +#define CCU_GSPMU_CR (MVEBU_CCU_BASE(MVEBU_AP0) \ + + 0x3F0) +#define GSPMU_CPU_CONTROL (0x1 << 0) + +#define CCU_HTC_CR (MVEBU_CCU_BASE(MVEBU_AP0) \ + + 0x200) +#define CCU_SET_POC_OFFSET 5 + +#define DSS_CR0 (MVEBU_RFU_BASE + 0x100) +#define DVM_48BIT_VA_ENABLE (1 << 21) + + +/* SoC RFU / IHBx4 Control */ +#define MCIX4_807_REG_START_ADDR_REG(unit_id) (MVEBU_RFU_BASE + \ + 0x4258 + (unit_id * 0x4)) + +/* Secure MoChi incoming access */ +#define SEC_MOCHI_IN_ACC_REG (MVEBU_RFU_BASE + 0x4738) +#define SEC_MOCHI_IN_ACC_IHB0_EN (1) +#define SEC_MOCHI_IN_ACC_IHB1_EN (1 << 3) +#define SEC_MOCHI_IN_ACC_IHB2_EN (1 << 6) +#define SEC_MOCHI_IN_ACC_PIDI_EN (1 << 9) +#define SEC_IN_ACCESS_ENA_ALL_MASTERS (SEC_MOCHI_IN_ACC_IHB0_EN | \ + SEC_MOCHI_IN_ACC_IHB1_EN | \ + SEC_MOCHI_IN_ACC_IHB2_EN | \ + SEC_MOCHI_IN_ACC_PIDI_EN) +#define MOCHI_IN_ACC_LEVEL_FORCE_NONSEC (0) +#define MOCHI_IN_ACC_LEVEL_FORCE_SEC (1) +#define MOCHI_IN_ACC_LEVEL_LEAVE_ORIG (2) +#define MOCHI_IN_ACC_LEVEL_MASK_ALL (3) +#define SEC_MOCHI_IN_ACC_IHB0_LEVEL(l) ((l) << 1) +#define SEC_MOCHI_IN_ACC_IHB1_LEVEL(l) ((l) << 4) +#define SEC_MOCHI_IN_ACC_PIDI_LEVEL(l) ((l) << 10) + + +/* SYSRST_OUTn Config definitions */ +#define MVEBU_SYSRST_OUT_CONFIG_REG (MVEBU_MISC_SOC_BASE + 0x4) +#define WD_MASK_SYS_RST_OUT (1 << 2) + +/* DSS PHY for DRAM */ +#define DSS_SCR_REG (MVEBU_RFU_BASE + 0x208) +#define DSS_PPROT_OFFS 4 +#define DSS_PPROT_MASK 0x7 +#define DSS_PPROT_PRIV_SECURE_DATA 0x1 + +/* Used for Units of AP-807 (e.g. SDIO and etc) */ +#define MVEBU_AXI_ATTR_BASE (MVEBU_REGS_BASE + 0x6F4580) +#define MVEBU_AXI_ATTR_REG(index) (MVEBU_AXI_ATTR_BASE + \ + 0x4 * index) + +#define XOR_STREAM_ID_REG(ch) (MVEBU_REGS_BASE + 0x410010 + (ch) * 0x20000) +#define XOR_STREAM_ID_MASK 0xFFFF +#define SDIO_STREAM_ID_REG (MVEBU_RFU_BASE + 0x4600) +#define SDIO_STREAM_ID_MASK 0xFF + +/* Do not use the default Stream ID 0 */ +#define A807_STREAM_ID_BASE (0x1) + +static uintptr_t stream_id_reg[] = { + XOR_STREAM_ID_REG(0), + XOR_STREAM_ID_REG(1), + XOR_STREAM_ID_REG(2), + XOR_STREAM_ID_REG(3), + SDIO_STREAM_ID_REG, + 0 +}; + +enum axi_attr { + AXI_SDIO_ATTR = 0, + AXI_DFX_ATTR, + AXI_MAX_ATTR, +}; + +static void ap_sec_masters_access_en(uint32_t enable) +{ + /* Open/Close incoming access for all masters. + * The access is disabled in trusted boot mode + * Could only be done in EL3 + */ + if (enable != 0) { + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, 0x0U, /* no clear */ + SEC_IN_ACCESS_ENA_ALL_MASTERS); +#if LLC_SRAM + /* Do not change access security level + * for PIDI masters + */ + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_MASK_ALL), + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_LEAVE_ORIG)); +#endif + } else { + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, + SEC_IN_ACCESS_ENA_ALL_MASTERS, + 0x0U /* no set */); +#if LLC_SRAM + /* Return PIDI access level to the default */ + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_MASK_ALL), + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_FORCE_NONSEC)); +#endif + } +} + +static void setup_smmu(void) +{ + uint32_t reg; + + /* Set the SMMU page size to 64 KB */ + reg = mmio_read_32(SMMU_sACR); + reg |= SMMU_sACR_PG_64K; + mmio_write_32(SMMU_sACR, reg); +} + +static void init_aurora2(void) +{ + uint32_t reg; + + /* Enable GSPMU control by CPU */ + reg = mmio_read_32(CCU_GSPMU_CR); + reg |= GSPMU_CPU_CONTROL; + mmio_write_32(CCU_GSPMU_CR, reg); + +#if LLC_ENABLE + /* Enable LLC for AP807 in exclusive mode */ + llc_enable(0, 1); + + /* Set point of coherency to DDR. + * This is required by units which have + * SW cache coherency + */ + reg = mmio_read_32(CCU_HTC_CR); + reg |= (0x1 << CCU_SET_POC_OFFSET); + mmio_write_32(CCU_HTC_CR, reg); +#endif /* LLC_ENABLE */ + + errata_wa_init(); +} + + +/* MCIx indirect access register are based by default at 0xf4000000/0xf6000000 + * to avoid conflict of internal registers of units connected via MCIx, which + * can be based on the same address (i.e CP1 base is also 0xf4000000), + * the following routines remaps the MCIx indirect bases to another domain + */ +static void mci_remap_indirect_access_base(void) +{ + uint32_t mci; + + for (mci = 0; mci < MCI_MAX_UNIT_ID; mci++) + mmio_write_32(MCIX4_807_REG_START_ADDR_REG(mci), + MVEBU_MCI_REG_BASE_REMAP(mci) >> + MCI_REMAP_OFF_SHIFT); +} + +/* Set a unique stream id for all DMA capable devices */ +static void ap807_stream_id_init(void) +{ + uint32_t i; + + for (i = 0; + stream_id_reg[i] != 0 && i < ARRAY_SIZE(stream_id_reg); i++) { + uint32_t mask = stream_id_reg[i] == SDIO_STREAM_ID_REG ? + SDIO_STREAM_ID_MASK : XOR_STREAM_ID_MASK; + + mmio_clrsetbits_32(stream_id_reg[i], mask, + i + A807_STREAM_ID_BASE); + } +} + +static void ap807_axi_attr_init(void) +{ + uint32_t index, data; + + /* Initialize AXI attributes for AP807 */ + /* Go over the AXI attributes and set Ax-Cache and Ax-Domain */ + for (index = 0; index < AXI_MAX_ATTR; index++) { + switch (index) { + /* DFX works with no coherent only - + * there's no option to configure the Ax-Cache and Ax-Domain + */ + case AXI_DFX_ATTR: + continue; + default: + /* Set Ax-Cache as cacheable, no allocate, modifiable, + * bufferable. + * The values are different because Read & Write + * definition is different in Ax-Cache + */ + data = mmio_read_32(MVEBU_AXI_ATTR_REG(index)); + data &= ~MVEBU_AXI_ATTR_ARCACHE_MASK; + data |= (CACHE_ATTR_WRITE_ALLOC | + CACHE_ATTR_CACHEABLE | + CACHE_ATTR_BUFFERABLE) << + MVEBU_AXI_ATTR_ARCACHE_OFFSET; + data &= ~MVEBU_AXI_ATTR_AWCACHE_MASK; + data |= (CACHE_ATTR_READ_ALLOC | + CACHE_ATTR_CACHEABLE | + CACHE_ATTR_BUFFERABLE) << + MVEBU_AXI_ATTR_AWCACHE_OFFSET; + /* Set Ax-Domain as Outer domain */ + data &= ~MVEBU_AXI_ATTR_ARDOMAIN_MASK; + data |= DOMAIN_OUTER_SHAREABLE << + MVEBU_AXI_ATTR_ARDOMAIN_OFFSET; + data &= ~MVEBU_AXI_ATTR_AWDOMAIN_MASK; + data |= DOMAIN_OUTER_SHAREABLE << + MVEBU_AXI_ATTR_AWDOMAIN_OFFSET; + mmio_write_32(MVEBU_AXI_ATTR_REG(index), data); + } + } +} + +static void misc_soc_configurations(void) +{ + uint32_t reg; + + /* Enable 48-bit VA */ + mmio_setbits_32(DSS_CR0, DVM_48BIT_VA_ENABLE); + + /* Un-mask Watchdog reset from influencing the SYSRST_OUTn. + * Otherwise, upon WD timeout, the WD reset signal won't trigger reset + */ + reg = mmio_read_32(MVEBU_SYSRST_OUT_CONFIG_REG); + reg &= ~(WD_MASK_SYS_RST_OUT); + mmio_write_32(MVEBU_SYSRST_OUT_CONFIG_REG, reg); +} + +/* + * By default all external CPs start with configuration address space set to + * 0xf200_0000. To overcome this issue, go in the loop and initialize the + * CP one by one, using temporary window configuration which allows to access + * each CP and update its configuration space according to decoding + * windows scheme defined for each platform. + */ +void update_cp110_default_win(int cp_id) +{ + int mci_id = cp_id - 1; + uintptr_t cp110_base, cp110_temp_base; + + /* CP110 default configuration address space */ + cp110_temp_base = MVEBU_AP_IO_BASE(MVEBU_AP0); + + struct addr_map_win iowin_temp_win = { + .base_addr = cp110_temp_base, + .win_size = MVEBU_CP_OFFSET, + }; + + iowin_temp_win.target_id = mci_id; + iow_temp_win_insert(0, &iowin_temp_win, 1); + + /* Calculate the new CP110 - base address */ + cp110_base = MVEBU_CP_REGS_BASE(cp_id); + /* Go and update the CP110 configuration address space */ + iob_cfg_space_update(0, cp_id, cp110_temp_base, cp110_base); + + /* Remove the temporary IO-WIN window */ + iow_temp_win_remove(0, &iowin_temp_win, 1); +} + +void ap_init(void) +{ + /* Setup Aurora2. */ + init_aurora2(); + + /* configure MCI mapping */ + mci_remap_indirect_access_base(); + + /* configure IO_WIN windows */ + init_io_win(MVEBU_AP0); + + /* configure CCU windows */ + init_ccu(MVEBU_AP0); + + /* Set the stream IDs for DMA masters */ + ap807_stream_id_init(); + + /* configure the SMMU */ + setup_smmu(); + + /* Open AP incoming access for all masters */ + ap_sec_masters_access_en(1); + + /* configure axi for AP */ + ap807_axi_attr_init(); + + /* misc configuration of the SoC */ + misc_soc_configurations(); +} + +static void ap807_dram_phy_access_config(void) +{ + uint32_t reg_val; + /* Update DSS port access permission to DSS_PHY */ + reg_val = mmio_read_32(DSS_SCR_REG); + reg_val &= ~(DSS_PPROT_MASK << DSS_PPROT_OFFS); + reg_val |= ((DSS_PPROT_PRIV_SECURE_DATA & DSS_PPROT_MASK) << + DSS_PPROT_OFFS); + mmio_write_32(DSS_SCR_REG, reg_val); +} + +void ap_ble_init(void) +{ + /* Enable DSS port */ + ap807_dram_phy_access_config(); +} + +int ap_get_count(void) +{ + return 1; +} + + diff --git a/drivers/marvell/mochi/apn806_setup.c b/drivers/marvell/mochi/apn806_setup.c new file mode 100644 index 0000000..5c71fed --- /dev/null +++ b/drivers/marvell/mochi/apn806_setup.c @@ -0,0 +1,297 @@ +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +/* AP806 Marvell SoC driver */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define SMMU_sACR (MVEBU_SMMU_BASE + 0x10) +#define SMMU_sACR_PG_64K (1 << 16) + +#define CCU_GSPMU_CR (MVEBU_CCU_BASE(MVEBU_AP0) + \ + 0x3F0) +#define GSPMU_CPU_CONTROL (0x1 << 0) + +#define CCU_HTC_CR (MVEBU_CCU_BASE(MVEBU_AP0) + \ + 0x200) +#define CCU_SET_POC_OFFSET 5 + +#define DSS_CR0 (MVEBU_RFU_BASE + 0x100) +#define DVM_48BIT_VA_ENABLE (1 << 21) + +/* Secure MoChi incoming access */ +#define SEC_MOCHI_IN_ACC_REG (MVEBU_RFU_BASE + 0x4738) +#define SEC_MOCHI_IN_ACC_IHB0_EN (1) +#define SEC_MOCHI_IN_ACC_IHB1_EN (1 << 3) +#define SEC_MOCHI_IN_ACC_IHB2_EN (1 << 6) +#define SEC_MOCHI_IN_ACC_PIDI_EN (1 << 9) +#define SEC_IN_ACCESS_ENA_ALL_MASTERS (SEC_MOCHI_IN_ACC_IHB0_EN | \ + SEC_MOCHI_IN_ACC_IHB1_EN | \ + SEC_MOCHI_IN_ACC_IHB2_EN | \ + SEC_MOCHI_IN_ACC_PIDI_EN) +#define MOCHI_IN_ACC_LEVEL_FORCE_NONSEC (0) +#define MOCHI_IN_ACC_LEVEL_FORCE_SEC (1) +#define MOCHI_IN_ACC_LEVEL_LEAVE_ORIG (2) +#define MOCHI_IN_ACC_LEVEL_MASK_ALL (3) +#define SEC_MOCHI_IN_ACC_IHB0_LEVEL(l) ((l) << 1) +#define SEC_MOCHI_IN_ACC_IHB1_LEVEL(l) ((l) << 4) +#define SEC_MOCHI_IN_ACC_PIDI_LEVEL(l) ((l) << 10) + + +/* SYSRST_OUTn Config definitions */ +#define MVEBU_SYSRST_OUT_CONFIG_REG (MVEBU_MISC_SOC_BASE + 0x4) +#define WD_MASK_SYS_RST_OUT (1 << 2) + +/* Generic Timer System Controller */ +#define MVEBU_MSS_GTCR_REG (MVEBU_REGS_BASE + 0x581000) +#define MVEBU_MSS_GTCR_ENABLE_BIT 0x1 + +/* + * AXI Configuration. + */ + +/* Used for Units of AP-806 (e.g. SDIO and etc) */ +#define MVEBU_AXI_ATTR_BASE (MVEBU_REGS_BASE + 0x6F4580) +#define MVEBU_AXI_ATTR_REG(index) (MVEBU_AXI_ATTR_BASE + \ + 0x4 * index) + +#define XOR_STREAM_ID_REG(ch) (MVEBU_REGS_BASE + 0x410010 + (ch) * 0x20000) +#define XOR_STREAM_ID_MASK 0xFFFF +#define SDIO_STREAM_ID_REG (MVEBU_RFU_BASE + 0x4600) +#define SDIO_STREAM_ID_MASK 0xFF + +/* Do not use the default Stream ID 0 */ +#define A806_STREAM_ID_BASE (0x1) + +static uintptr_t stream_id_reg[] = { + XOR_STREAM_ID_REG(0), + XOR_STREAM_ID_REG(1), + XOR_STREAM_ID_REG(2), + XOR_STREAM_ID_REG(3), + SDIO_STREAM_ID_REG, + 0 +}; + +enum axi_attr { + AXI_SDIO_ATTR = 0, + AXI_DFX_ATTR, + AXI_MAX_ATTR, +}; + +static void apn_sec_masters_access_en(uint32_t enable) +{ + /* Open/Close incoming access for all masters. + * The access is disabled in trusted boot mode + * Could only be done in EL3 + */ + if (enable != 0) { + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, 0x0U, /* no clear */ + SEC_IN_ACCESS_ENA_ALL_MASTERS); +#if LLC_SRAM + /* Do not change access security level + * for PIDI masters + */ + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_MASK_ALL), + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_LEAVE_ORIG)); +#endif + } else { + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, + SEC_IN_ACCESS_ENA_ALL_MASTERS, + 0x0U /* no set */); +#if LLC_SRAM + /* Return PIDI access level to the default */ + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_MASK_ALL), + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_FORCE_NONSEC)); +#endif + } +} + +static void setup_smmu(void) +{ + uint32_t reg; + + /* Set the SMMU page size to 64 KB */ + reg = mmio_read_32(SMMU_sACR); + reg |= SMMU_sACR_PG_64K; + mmio_write_32(SMMU_sACR, reg); +} + +static void init_aurora2(void) +{ + uint32_t reg; + + /* Enable GSPMU control by CPU */ + reg = mmio_read_32(CCU_GSPMU_CR); + reg |= GSPMU_CPU_CONTROL; + mmio_write_32(CCU_GSPMU_CR, reg); + +#if LLC_ENABLE + /* Enable LLC for AP806 in exclusive mode */ + llc_enable(0, 1); + + /* Set point of coherency to DDR. + * This is required by units which have + * SW cache coherency + */ + reg = mmio_read_32(CCU_HTC_CR); + reg |= (0x1 << CCU_SET_POC_OFFSET); + mmio_write_32(CCU_HTC_CR, reg); +#endif /* LLC_ENABLE */ + + errata_wa_init(); +} + + +/* MCIx indirect access register are based by default at 0xf4000000/0xf6000000 + * to avoid conflict of internal registers of units connected via MCIx, which + * can be based on the same address (i.e CP1 base is also 0xf4000000), + * the following routines remaps the MCIx indirect bases to another domain + */ +static void mci_remap_indirect_access_base(void) +{ + uint32_t mci; + + for (mci = 0; mci < MCI_MAX_UNIT_ID; mci++) + mmio_write_32(MCIX4_REG_START_ADDRESS_REG(mci), + MVEBU_MCI_REG_BASE_REMAP(mci) >> + MCI_REMAP_OFF_SHIFT); +} + +/* Set a unique stream id for all DMA capable devices */ +static void ap806_stream_id_init(void) +{ + int i; + + for (i = 0; stream_id_reg[i] != 0; i++) { + uint32_t mask = stream_id_reg[i] == SDIO_STREAM_ID_REG ? + SDIO_STREAM_ID_MASK : XOR_STREAM_ID_MASK; + + mmio_clrsetbits_32(stream_id_reg[i], mask, + i + A806_STREAM_ID_BASE); + } +} + +static void apn806_axi_attr_init(void) +{ + uint32_t index, data; + + /* Initialize AXI attributes for APN806 */ + + /* Go over the AXI attributes and set Ax-Cache and Ax-Domain */ + for (index = 0; index < AXI_MAX_ATTR; index++) { + switch (index) { + /* DFX works with no coherent only - + * there's no option to configure the Ax-Cache and Ax-Domain + */ + case AXI_DFX_ATTR: + continue; + default: + /* Set Ax-Cache as cacheable, no allocate, modifiable, + * bufferable + * The values are different because Read & Write + * definition is different in Ax-Cache + */ + data = mmio_read_32(MVEBU_AXI_ATTR_REG(index)); + data &= ~MVEBU_AXI_ATTR_ARCACHE_MASK; + data |= (CACHE_ATTR_WRITE_ALLOC | + CACHE_ATTR_CACHEABLE | + CACHE_ATTR_BUFFERABLE) << + MVEBU_AXI_ATTR_ARCACHE_OFFSET; + data &= ~MVEBU_AXI_ATTR_AWCACHE_MASK; + data |= (CACHE_ATTR_READ_ALLOC | + CACHE_ATTR_CACHEABLE | + CACHE_ATTR_BUFFERABLE) << + MVEBU_AXI_ATTR_AWCACHE_OFFSET; + /* Set Ax-Domain as Outer domain */ + data &= ~MVEBU_AXI_ATTR_ARDOMAIN_MASK; + data |= DOMAIN_OUTER_SHAREABLE << + MVEBU_AXI_ATTR_ARDOMAIN_OFFSET; + data &= ~MVEBU_AXI_ATTR_AWDOMAIN_MASK; + data |= DOMAIN_OUTER_SHAREABLE << + MVEBU_AXI_ATTR_AWDOMAIN_OFFSET; + mmio_write_32(MVEBU_AXI_ATTR_REG(index), data); + } + } +} + +static void dss_setup(void) +{ + /* Enable 48-bit VA */ + mmio_setbits_32(DSS_CR0, DVM_48BIT_VA_ENABLE); +} + +void misc_soc_configurations(void) +{ + uint32_t reg; + + /* Un-mask Watchdog reset from influencing the SYSRST_OUTn. + * Otherwise, upon WD timeout, the WD reset signal won't trigger reset + */ + reg = mmio_read_32(MVEBU_SYSRST_OUT_CONFIG_REG); + reg &= ~(WD_MASK_SYS_RST_OUT); + mmio_write_32(MVEBU_SYSRST_OUT_CONFIG_REG, reg); +} + +void ap_init(void) +{ + /* Setup Aurora2. */ + init_aurora2(); + + /* configure MCI mapping */ + mci_remap_indirect_access_base(); + + /* configure IO_WIN windows */ + init_io_win(MVEBU_AP0); + + /* configure CCU windows */ + init_ccu(MVEBU_AP0); + + /* configure DSS */ + dss_setup(); + + /* Set the stream IDs for DMA masters */ + ap806_stream_id_init(); + + /* configure the SMMU */ + setup_smmu(); + + /* Open APN incoming access for all masters */ + apn_sec_masters_access_en(1); + + /* configure axi for APN*/ + apn806_axi_attr_init(); + + /* misc configuration of the SoC */ + misc_soc_configurations(); +} + +void ap_ble_init(void) +{ +} + +int ap_get_count(void) +{ + return 1; +} + +void update_cp110_default_win(int cp_id) +{ +} diff --git a/drivers/marvell/mochi/cp110_setup.c b/drivers/marvell/mochi/cp110_setup.c new file mode 100644 index 0000000..f12da0e --- /dev/null +++ b/drivers/marvell/mochi/cp110_setup.c @@ -0,0 +1,467 @@ +/* + * Copyright (C) 2018-2020 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +/* CP110 Marvell SoC driver */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * AXI Configuration. + */ + + /* Used for Units of CP-110 (e.g. USB device, USB Host, and etc) */ +#define MVEBU_AXI_ATTR_OFFSET (0x441300) +#define MVEBU_AXI_ATTR_REG(index) (MVEBU_AXI_ATTR_OFFSET + \ + 0x4 * index) + +/* AXI Protection bits */ +#define MVEBU_AXI_PROT_OFFSET (0x441200) + +/* AXI Protection regs */ +#define MVEBU_AXI_PROT_REG(index) ((index <= 4) ? \ + (MVEBU_AXI_PROT_OFFSET + \ + 0x4 * index) : \ + (MVEBU_AXI_PROT_OFFSET + 0x18)) +#define MVEBU_AXI_PROT_REGS_NUM (6) + +#define MVEBU_SOC_CFGS_OFFSET (0x441900) +#define MVEBU_SOC_CFG_REG(index) (MVEBU_SOC_CFGS_OFFSET + \ + 0x4 * index) +#define MVEBU_SOC_CFG_REG_NUM (0) +#define MVEBU_SOC_CFG_GLOG_SECURE_EN_MASK (0xE) + +/* SATA3 MBUS to AXI regs */ +#define MVEBU_BRIDGE_WIN_DIS_REG (MVEBU_SOC_CFGS_OFFSET + 0x10) +#define MVEBU_BRIDGE_WIN_DIS_OFF (0x0) + +/* SATA3 MBUS to AXI regs */ +#define MVEBU_SATA_M2A_AXI_PORT_CTRL_REG (0x54ff04) + +/* AXI to MBUS bridge registers */ +#define MVEBU_AMB_IP_OFFSET (0x13ff00) +#define MVEBU_AMB_IP_BRIDGE_WIN_REG(win) (MVEBU_AMB_IP_OFFSET + \ + (win * 0x8)) +#define MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET 0 +#define MVEBU_AMB_IP_BRIDGE_WIN_EN_MASK \ + (0x1 << MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET) +#define MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET 16 +#define MVEBU_AMB_IP_BRIDGE_WIN_SIZE_MASK \ + (0xffffu << MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET) + +#define MVEBU_SAMPLE_AT_RESET_REG (0x440600) +#define SAR_PCIE1_CLK_CFG_OFFSET 31 +#define SAR_PCIE1_CLK_CFG_MASK (0x1u << SAR_PCIE1_CLK_CFG_OFFSET) +#define SAR_PCIE0_CLK_CFG_OFFSET 30 +#define SAR_PCIE0_CLK_CFG_MASK (0x1 << SAR_PCIE0_CLK_CFG_OFFSET) +#define SAR_I2C_INIT_EN_OFFSET 24 +#define SAR_I2C_INIT_EN_MASK (1 << SAR_I2C_INIT_EN_OFFSET) + +/******************************************************************************* + * PCIE clock buffer control + ******************************************************************************/ +#define MVEBU_PCIE_REF_CLK_BUF_CTRL (0x4404F0) +#define PCIE1_REFCLK_BUFF_SOURCE 0x800 +#define PCIE0_REFCLK_BUFF_SOURCE 0x400 + +/******************************************************************************* + * MSS Device Push Set Register + ******************************************************************************/ +#define MVEBU_CP_MSS_DPSHSR_REG (0x280040) +#define MSS_DPSHSR_REG_PCIE_CLK_SEL 0x8 + +/******************************************************************************* + * RTC Configuration + ******************************************************************************/ +#define MVEBU_RTC_BASE (0x284000) +#define MVEBU_RTC_STATUS_REG (MVEBU_RTC_BASE + 0x0) +#define MVEBU_RTC_STATUS_ALARM1_MASK 0x1 +#define MVEBU_RTC_STATUS_ALARM2_MASK 0x2 +#define MVEBU_RTC_IRQ_1_CONFIG_REG (MVEBU_RTC_BASE + 0x4) +#define MVEBU_RTC_IRQ_2_CONFIG_REG (MVEBU_RTC_BASE + 0x8) +#define MVEBU_RTC_TIME_REG (MVEBU_RTC_BASE + 0xC) +#define MVEBU_RTC_ALARM_1_REG (MVEBU_RTC_BASE + 0x10) +#define MVEBU_RTC_ALARM_2_REG (MVEBU_RTC_BASE + 0x14) +#define MVEBU_RTC_CCR_REG (MVEBU_RTC_BASE + 0x18) +#define MVEBU_RTC_NOMINAL_TIMING 0x2000 +#define MVEBU_RTC_NOMINAL_TIMING_MASK 0x7FFF +#define MVEBU_RTC_TEST_CONFIG_REG (MVEBU_RTC_BASE + 0x1C) +#define MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG (MVEBU_RTC_BASE + 0x80) +#define MVEBU_RTC_WRCLK_PERIOD_MASK 0xFFFF +#define MVEBU_RTC_WRCLK_PERIOD_DEFAULT 0x3FF +#define MVEBU_RTC_WRCLK_SETUP_OFFS 16 +#define MVEBU_RTC_WRCLK_SETUP_MASK 0xFFFF0000 +#define MVEBU_RTC_WRCLK_SETUP_DEFAULT 0x29 +#define MVEBU_RTC_BRIDGE_TIMING_CTRL1_REG (MVEBU_RTC_BASE + 0x84) +#define MVEBU_RTC_READ_OUTPUT_DELAY_MASK 0xFFFF +#define MVEBU_RTC_READ_OUTPUT_DELAY_DEFAULT 0x1F + +/******************************************************************************* + * TRNG Configuration + ******************************************************************************/ +#define MVEBU_TRNG_BASE (0x760000) +#define MVEBU_EFUSE_TRNG_ENABLE_EFUSE_WORD MVEBU_AP_LDX_220_189_EFUSE_OFFS +#define MVEBU_EFUSE_TRNG_ENABLE_BIT_OFFSET 13 /* LD0[202] */ + +enum axi_attr { + AXI_ADUNIT_ATTR = 0, + AXI_COMUNIT_ATTR, + AXI_EIP197_ATTR, + AXI_USB3D_ATTR, + AXI_USB3H0_ATTR, + AXI_USB3H1_ATTR, + AXI_SATA0_ATTR, + AXI_SATA1_ATTR, + AXI_DAP_ATTR, + AXI_DFX_ATTR, + AXI_DBG_TRC_ATTR = 12, + AXI_SDIO_ATTR, + AXI_MSS_ATTR, + AXI_MAX_ATTR, +}; + +/* Most stream IDS are configured centrally in the CP-110 RFU + * but some are configured inside the unit registers + */ +#define RFU_STREAM_ID_BASE (0x450000) +#define USB3H_0_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0xC) +#define USB3H_1_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x10) +#define SATA_0_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x14) +#define SATA_1_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x18) +#define SDIO_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x28) + +#define CP_DMA_0_STREAM_ID_REG (0x6B0010) +#define CP_DMA_1_STREAM_ID_REG (0x6D0010) + +/* We allocate IDs 128-255 for PCIe */ +#define MAX_STREAM_ID (0x80) + +static uintptr_t stream_id_reg[] = { + USB3H_0_STREAM_ID_REG, + USB3H_1_STREAM_ID_REG, + CP_DMA_0_STREAM_ID_REG, + CP_DMA_1_STREAM_ID_REG, + SATA_0_STREAM_ID_REG, + SATA_1_STREAM_ID_REG, + SDIO_STREAM_ID_REG, + 0 +}; + +static void cp110_errata_wa_init(uintptr_t base) +{ + uint32_t data; + + /* ERRATA GL-4076863: + * Reset value for global_secure_enable inputs must be changed + * from '1' to '0'. + * When asserted, only "secured" transactions can enter IHB + * configuration space. + * However, blocking AXI transactions is performed by IOB. + * Performing it also at IHB/HB complicates programming model. + * + * Enable non-secure access in SOC configuration register + */ + data = mmio_read_32(base + MVEBU_SOC_CFG_REG(MVEBU_SOC_CFG_REG_NUM)); + data &= ~MVEBU_SOC_CFG_GLOG_SECURE_EN_MASK; + mmio_write_32(base + MVEBU_SOC_CFG_REG(MVEBU_SOC_CFG_REG_NUM), data); +} + +static void cp110_pcie_clk_cfg(uintptr_t base) +{ + uint32_t pcie0_clk, pcie1_clk, reg; + + /* + * Determine the pcie0/1 clock direction (input/output) from the + * sample at reset. + */ + reg = mmio_read_32(base + MVEBU_SAMPLE_AT_RESET_REG); + pcie0_clk = (reg & SAR_PCIE0_CLK_CFG_MASK) >> SAR_PCIE0_CLK_CFG_OFFSET; + pcie1_clk = (reg & SAR_PCIE1_CLK_CFG_MASK) >> SAR_PCIE1_CLK_CFG_OFFSET; + + /* CP110 revision A2 or CN913x */ + if (cp110_rev_id_get(base) == MVEBU_CP110_REF_ID_A2 || + cp110_device_id_get(base) == MVEBU_CN9130_DEV_ID) { + /* + * PCIe Reference Clock Buffer Control register must be + * set according to the clock direction (input/output) + */ + reg = mmio_read_32(base + MVEBU_PCIE_REF_CLK_BUF_CTRL); + reg &= ~(PCIE0_REFCLK_BUFF_SOURCE | PCIE1_REFCLK_BUFF_SOURCE); + if (!pcie0_clk) + reg |= PCIE0_REFCLK_BUFF_SOURCE; + if (!pcie1_clk) + reg |= PCIE1_REFCLK_BUFF_SOURCE; + + mmio_write_32(base + MVEBU_PCIE_REF_CLK_BUF_CTRL, reg); + } + + /* CP110 revision A1 */ + if (cp110_rev_id_get(base) == MVEBU_CP110_REF_ID_A1) { + if (!pcie0_clk || !pcie1_clk) { + /* + * if one of the pcie clocks is set to input, + * we need to set mss_push[131] field, otherwise, + * the pcie clock might not work. + */ + reg = mmio_read_32(base + MVEBU_CP_MSS_DPSHSR_REG); + reg |= MSS_DPSHSR_REG_PCIE_CLK_SEL; + mmio_write_32(base + MVEBU_CP_MSS_DPSHSR_REG, reg); + } + } +} + +/* Set a unique stream id for all DMA capable devices */ +static void cp110_stream_id_init(uintptr_t base, uint32_t stream_id) +{ + int i = 0; + + while (stream_id_reg[i]) { + if (i > MAX_STREAM_ID_PER_CP) { + NOTICE("Only first %d (maximum) Stream IDs allocated\n", + MAX_STREAM_ID_PER_CP); + return; + } + + if ((stream_id_reg[i] == CP_DMA_0_STREAM_ID_REG) || + (stream_id_reg[i] == CP_DMA_1_STREAM_ID_REG)) + mmio_write_32(base + stream_id_reg[i], + stream_id << 16 | stream_id); + else + mmio_write_32(base + stream_id_reg[i], stream_id); + + /* SATA port 0/1 are in the same SATA unit, and they should use + * the same STREAM ID number + */ + if (stream_id_reg[i] != SATA_0_STREAM_ID_REG) + stream_id++; + + i++; + } +} + +static void cp110_axi_attr_init(uintptr_t base) +{ + uint32_t index, data; + + /* Initialize AXI attributes for Armada-7K/8K SoC */ + + /* Go over the AXI attributes and set Ax-Cache and Ax-Domain */ + for (index = 0; index < AXI_MAX_ATTR; index++) { + switch (index) { + /* DFX and MSS unit works with no coherent only - + * there's no option to configure the Ax-Cache and Ax-Domain + */ + case AXI_DFX_ATTR: + case AXI_MSS_ATTR: + continue; + default: + /* Set Ax-Cache as cacheable, no allocate, modifiable, + * bufferable + * The values are different because Read & Write + * definition is different in Ax-Cache + */ + data = mmio_read_32(base + MVEBU_AXI_ATTR_REG(index)); + data &= ~MVEBU_AXI_ATTR_ARCACHE_MASK; + data |= (CACHE_ATTR_WRITE_ALLOC | + CACHE_ATTR_CACHEABLE | + CACHE_ATTR_BUFFERABLE) << + MVEBU_AXI_ATTR_ARCACHE_OFFSET; + data &= ~MVEBU_AXI_ATTR_AWCACHE_MASK; + data |= (CACHE_ATTR_READ_ALLOC | + CACHE_ATTR_CACHEABLE | + CACHE_ATTR_BUFFERABLE) << + MVEBU_AXI_ATTR_AWCACHE_OFFSET; + /* Set Ax-Domain as Outer domain */ + data &= ~MVEBU_AXI_ATTR_ARDOMAIN_MASK; + data |= DOMAIN_OUTER_SHAREABLE << + MVEBU_AXI_ATTR_ARDOMAIN_OFFSET; + data &= ~MVEBU_AXI_ATTR_AWDOMAIN_MASK; + data |= DOMAIN_OUTER_SHAREABLE << + MVEBU_AXI_ATTR_AWDOMAIN_OFFSET; + mmio_write_32(base + MVEBU_AXI_ATTR_REG(index), data); + } + } + + /* SATA IOCC supported, cache attributes + * for SATA MBUS to AXI configuration. + */ + data = mmio_read_32(base + MVEBU_SATA_M2A_AXI_PORT_CTRL_REG); + data &= ~MVEBU_SATA_M2A_AXI_AWCACHE_MASK; + data |= (CACHE_ATTR_WRITE_ALLOC | + CACHE_ATTR_CACHEABLE | + CACHE_ATTR_BUFFERABLE) << + MVEBU_SATA_M2A_AXI_AWCACHE_OFFSET; + data &= ~MVEBU_SATA_M2A_AXI_ARCACHE_MASK; + data |= (CACHE_ATTR_READ_ALLOC | + CACHE_ATTR_CACHEABLE | + CACHE_ATTR_BUFFERABLE) << + MVEBU_SATA_M2A_AXI_ARCACHE_OFFSET; + mmio_write_32(base + MVEBU_SATA_M2A_AXI_PORT_CTRL_REG, data); + + /* Set all IO's AXI attribute to non-secure access. */ + for (index = 0; index < MVEBU_AXI_PROT_REGS_NUM; index++) + mmio_write_32(base + MVEBU_AXI_PROT_REG(index), + DOMAIN_SYSTEM_SHAREABLE); +} + +void cp110_amb_init(uintptr_t base) +{ + uint32_t reg; + + /* Open AMB bridge Window to Access COMPHY/MDIO registers */ + reg = mmio_read_32(base + MVEBU_AMB_IP_BRIDGE_WIN_REG(0)); + reg &= ~(MVEBU_AMB_IP_BRIDGE_WIN_SIZE_MASK | + MVEBU_AMB_IP_BRIDGE_WIN_EN_MASK); + reg |= (0x7ff << MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET) | + (0x1 << MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET); + mmio_write_32(base + MVEBU_AMB_IP_BRIDGE_WIN_REG(0), reg); +} + +static void cp110_rtc_init(uintptr_t base) +{ + /* Update MBus timing parameters before accessing RTC registers */ + mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG, + MVEBU_RTC_WRCLK_PERIOD_MASK, + MVEBU_RTC_WRCLK_PERIOD_DEFAULT); + + mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG, + MVEBU_RTC_WRCLK_SETUP_MASK, + MVEBU_RTC_WRCLK_SETUP_DEFAULT << + MVEBU_RTC_WRCLK_SETUP_OFFS); + + mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL1_REG, + MVEBU_RTC_READ_OUTPUT_DELAY_MASK, + MVEBU_RTC_READ_OUTPUT_DELAY_DEFAULT); + + /* + * Issue reset to the RTC if Clock Correction register + * contents did not sustain the reboot/power-on. + */ + if ((mmio_read_32(base + MVEBU_RTC_CCR_REG) & + MVEBU_RTC_NOMINAL_TIMING_MASK) != MVEBU_RTC_NOMINAL_TIMING) { + /* Reset Test register */ + mmio_write_32(base + MVEBU_RTC_TEST_CONFIG_REG, 0); + mdelay(500); + + /* Reset Status register */ + mmio_write_32(base + MVEBU_RTC_STATUS_REG, + (MVEBU_RTC_STATUS_ALARM1_MASK | + MVEBU_RTC_STATUS_ALARM2_MASK)); + udelay(62); + + /* Turn off Int1 and Int2 sources & clear the Alarm count */ + mmio_write_32(base + MVEBU_RTC_IRQ_1_CONFIG_REG, 0); + mmio_write_32(base + MVEBU_RTC_IRQ_2_CONFIG_REG, 0); + mmio_write_32(base + MVEBU_RTC_ALARM_1_REG, 0); + mmio_write_32(base + MVEBU_RTC_ALARM_2_REG, 0); + + /* Setup nominal register access timing */ + mmio_write_32(base + MVEBU_RTC_CCR_REG, + MVEBU_RTC_NOMINAL_TIMING); + + /* Reset Status register */ + mmio_write_32(base + MVEBU_RTC_STATUS_REG, + (MVEBU_RTC_STATUS_ALARM1_MASK | + MVEBU_RTC_STATUS_ALARM2_MASK)); + udelay(50); + } +} + +static void cp110_amb_adec_init(uintptr_t base) +{ + /* enable AXI-MBUS by clearing "Bridge Windows Disable" */ + mmio_clrbits_32(base + MVEBU_BRIDGE_WIN_DIS_REG, + (1 << MVEBU_BRIDGE_WIN_DIS_OFF)); + + /* configure AXI-MBUS windows for CP */ + init_amb_adec(base); +} + +static void cp110_trng_init(uintptr_t base) +{ + static bool done; + int ret; + uint32_t reg_val, efuse; + + /* Set access to LD0 */ + reg_val = mmio_read_32(MVEBU_AP_EFUSE_SRV_CTRL_REG); + reg_val &= ~EFUSE_SRV_CTRL_LD_SELECT_MASK; + mmio_write_32(MVEBU_AP_EFUSE_SRV_CTRL_REG, reg_val); + + /* Obtain the AP LD0 bit defining TRNG presence */ + efuse = mmio_read_32(MVEBU_EFUSE_TRNG_ENABLE_EFUSE_WORD); + efuse >>= MVEBU_EFUSE_TRNG_ENABLE_BIT_OFFSET; + efuse &= 1; + + if (efuse == 0) { + VERBOSE("TRNG is not present, skipping"); + return; + } + + if (!done) { + ret = eip76_rng_probe(base + MVEBU_TRNG_BASE); + if (ret != 0) { + ERROR("Failed to init TRNG @ 0x%lx\n", base); + return; + } + done = true; + } +} +void cp110_init(uintptr_t cp110_base, uint32_t stream_id) +{ + INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base); + + /* configure IOB windows for CP0*/ + init_iob(cp110_base); + + /* configure AXI-MBUS windows for CP0*/ + cp110_amb_adec_init(cp110_base); + + /* configure axi for CP0*/ + cp110_axi_attr_init(cp110_base); + + /* Execute SW WA for erratas */ + cp110_errata_wa_init(cp110_base); + + /* Confiure pcie clock according to clock direction */ + cp110_pcie_clk_cfg(cp110_base); + + /* configure stream id for CP0 */ + cp110_stream_id_init(cp110_base, stream_id); + + /* Open AMB bridge for comphy for CP0 & CP1*/ + cp110_amb_init(cp110_base); + + /* Reset RTC if needed */ + cp110_rtc_init(cp110_base); + + /* TRNG init - for CP0 only */ + cp110_trng_init(cp110_base); +} + +/* Do the minimal setup required to configure the CP in BLE */ +void cp110_ble_init(uintptr_t cp110_base) +{ +#if PCI_EP_SUPPORT + INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base); + + cp110_amb_init(cp110_base); + + /* Configure PCIe clock */ + cp110_pcie_clk_cfg(cp110_base); + + /* Configure PCIe endpoint */ + ble_plat_pcie_ep_setup(); +#endif +} -- cgit v1.2.3