From 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:13:47 +0200 Subject: Adding upstream version 2.8.0+dfsg. Signed-off-by: Daniel Baumann --- drivers/mtd/spi-mem/spi_mem.c | 289 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 289 insertions(+) create mode 100644 drivers/mtd/spi-mem/spi_mem.c (limited to 'drivers/mtd/spi-mem') diff --git a/drivers/mtd/spi-mem/spi_mem.c b/drivers/mtd/spi-mem/spi_mem.c new file mode 100644 index 0000000..c43d519 --- /dev/null +++ b/drivers/mtd/spi-mem/spi_mem.c @@ -0,0 +1,289 @@ +/* + * Copyright (c) 2019-2022, STMicroelectronics - All Rights Reserved + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include +#include + +#include +#include +#include + +#define SPI_MEM_DEFAULT_SPEED_HZ 100000U + +/* + * struct spi_slave - Representation of a SPI slave. + * + * @max_hz: Maximum speed for this slave in Hertz. + * @cs: ID of the chip select connected to the slave. + * @mode: SPI mode to use for this slave (see SPI mode flags). + * @ops: Ops defined by the bus. + */ +struct spi_slave { + unsigned int max_hz; + unsigned int cs; + unsigned int mode; + const struct spi_bus_ops *ops; +}; + +static struct spi_slave spi_slave; + +static bool spi_mem_check_buswidth_req(uint8_t buswidth, bool tx) +{ + switch (buswidth) { + case 1U: + return true; + + case 2U: + if ((tx && (spi_slave.mode & (SPI_TX_DUAL | SPI_TX_QUAD)) != + 0U) || + (!tx && (spi_slave.mode & (SPI_RX_DUAL | SPI_RX_QUAD)) != + 0U)) { + return true; + } + break; + + case 4U: + if ((tx && (spi_slave.mode & SPI_TX_QUAD) != 0U) || + (!tx && (spi_slave.mode & SPI_RX_QUAD) != 0U)) { + return true; + } + break; + + default: + break; + } + + return false; +} + +static bool spi_mem_supports_op(const struct spi_mem_op *op) +{ + if (!spi_mem_check_buswidth_req(op->cmd.buswidth, true)) { + return false; + } + + if ((op->addr.nbytes != 0U) && + !spi_mem_check_buswidth_req(op->addr.buswidth, true)) { + return false; + } + + if ((op->dummy.nbytes != 0U) && + !spi_mem_check_buswidth_req(op->dummy.buswidth, true)) { + return false; + } + + if ((op->data.nbytes != 0U) && + !spi_mem_check_buswidth_req(op->data.buswidth, + op->data.dir == SPI_MEM_DATA_OUT)) { + return false; + } + + return true; +} + +static int spi_mem_set_speed_mode(void) +{ + const struct spi_bus_ops *ops = spi_slave.ops; + int ret; + + ret = ops->set_speed(spi_slave.max_hz); + if (ret != 0) { + VERBOSE("Cannot set speed (err=%d)\n", ret); + return ret; + } + + ret = ops->set_mode(spi_slave.mode); + if (ret != 0) { + VERBOSE("Cannot set mode (err=%d)\n", ret); + return ret; + } + + return 0; +} + +static int spi_mem_check_bus_ops(const struct spi_bus_ops *ops) +{ + bool error = false; + + if (ops->claim_bus == NULL) { + VERBOSE("Ops claim bus is not defined\n"); + error = true; + } + + if (ops->release_bus == NULL) { + VERBOSE("Ops release bus is not defined\n"); + error = true; + } + + if (ops->exec_op == NULL) { + VERBOSE("Ops exec op is not defined\n"); + error = true; + } + + if (ops->set_speed == NULL) { + VERBOSE("Ops set speed is not defined\n"); + error = true; + } + + if (ops->set_mode == NULL) { + VERBOSE("Ops set mode is not defined\n"); + error = true; + } + + return error ? -EINVAL : 0; +} + +/* + * spi_mem_exec_op() - Execute a memory operation. + * @op: The memory operation to execute. + * + * This function first checks that @op is supported and then tries to execute + * it. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int spi_mem_exec_op(const struct spi_mem_op *op) +{ + const struct spi_bus_ops *ops = spi_slave.ops; + int ret; + + VERBOSE("%s: cmd:%x mode:%d.%d.%d.%d addqr:%" PRIx64 " len:%x\n", + __func__, op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, + op->dummy.buswidth, op->data.buswidth, + op->addr.val, op->data.nbytes); + + if (!spi_mem_supports_op(op)) { + WARN("Error in spi_mem_support\n"); + return -ENOTSUP; + } + + ret = ops->claim_bus(spi_slave.cs); + if (ret != 0) { + WARN("Error claim_bus\n"); + return ret; + } + + ret = ops->exec_op(op); + + ops->release_bus(); + + return ret; +} + +/* + * spi_mem_init_slave() - SPI slave device initialization. + * @fdt: Pointer to the device tree blob. + * @bus_node: Offset of the bus node. + * @ops: The SPI bus ops defined. + * + * This function first checks that @ops are supported and then tries to find + * a SPI slave device. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int spi_mem_init_slave(void *fdt, int bus_node, const struct spi_bus_ops *ops) +{ + int ret; + int mode = 0; + int nchips = 0; + int bus_subnode = 0; + const fdt32_t *cuint = NULL; + + ret = spi_mem_check_bus_ops(ops); + if (ret != 0) { + return ret; + } + + fdt_for_each_subnode(bus_subnode, fdt, bus_node) { + nchips++; + } + + if (nchips != 1) { + ERROR("Only one SPI device is currently supported\n"); + return -EINVAL; + } + + fdt_for_each_subnode(bus_subnode, fdt, bus_node) { + /* Get chip select */ + cuint = fdt_getprop(fdt, bus_subnode, "reg", NULL); + if (cuint == NULL) { + ERROR("Chip select not well defined\n"); + return -EINVAL; + } + spi_slave.cs = fdt32_to_cpu(*cuint); + + /* Get max slave frequency */ + spi_slave.max_hz = SPI_MEM_DEFAULT_SPEED_HZ; + cuint = fdt_getprop(fdt, bus_subnode, + "spi-max-frequency", NULL); + if (cuint != NULL) { + spi_slave.max_hz = fdt32_to_cpu(*cuint); + } + + /* Get mode */ + if ((fdt_getprop(fdt, bus_subnode, "spi-cpol", NULL)) != NULL) { + mode |= SPI_CPOL; + } + if ((fdt_getprop(fdt, bus_subnode, "spi-cpha", NULL)) != NULL) { + mode |= SPI_CPHA; + } + if ((fdt_getprop(fdt, bus_subnode, "spi-cs-high", NULL)) != + NULL) { + mode |= SPI_CS_HIGH; + } + if ((fdt_getprop(fdt, bus_subnode, "spi-3wire", NULL)) != + NULL) { + mode |= SPI_3WIRE; + } + if ((fdt_getprop(fdt, bus_subnode, "spi-half-duplex", NULL)) != + NULL) { + mode |= SPI_PREAMBLE; + } + + /* Get dual/quad mode */ + cuint = fdt_getprop(fdt, bus_subnode, "spi-tx-bus-width", NULL); + if (cuint != NULL) { + switch (fdt32_to_cpu(*cuint)) { + case 1U: + break; + case 2U: + mode |= SPI_TX_DUAL; + break; + case 4U: + mode |= SPI_TX_QUAD; + break; + default: + WARN("spi-tx-bus-width %u not supported\n", + fdt32_to_cpu(*cuint)); + return -EINVAL; + } + } + + cuint = fdt_getprop(fdt, bus_subnode, "spi-rx-bus-width", NULL); + if (cuint != NULL) { + switch (fdt32_to_cpu(*cuint)) { + case 1U: + break; + case 2U: + mode |= SPI_RX_DUAL; + break; + case 4U: + mode |= SPI_RX_QUAD; + break; + default: + WARN("spi-rx-bus-width %u not supported\n", + fdt32_to_cpu(*cuint)); + return -EINVAL; + } + } + + spi_slave.mode = mode; + spi_slave.ops = ops; + } + + return spi_mem_set_speed_mode(); +} -- cgit v1.2.3