From 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 28 Apr 2024 11:13:47 +0200 Subject: Adding upstream version 2.8.0+dfsg. Signed-off-by: Daniel Baumann --- include/drivers/st/regulator.h | 108 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) create mode 100644 include/drivers/st/regulator.h (limited to 'include/drivers/st/regulator.h') diff --git a/include/drivers/st/regulator.h b/include/drivers/st/regulator.h new file mode 100644 index 0000000..bf583e2 --- /dev/null +++ b/include/drivers/st/regulator.h @@ -0,0 +1,108 @@ +/* + * Copyright (c) 2021, STMicroelectronics - All Rights Reserved + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef REGULATOR_H +#define REGULATOR_H + +#include + +#ifndef PLAT_NB_RDEVS +#error "Missing PLAT_NB_RDEVS" +#endif + +/* + * Consumer interface + */ + +/* regulator-always-on : regulator should never be disabled */ +#define REGUL_ALWAYS_ON BIT(0) +/* + * regulator-boot-on: + * It's expected that this regulator was left on by the bootloader. + * The core shouldn't prevent it from being turned off later. + * The regulator is needed to exit from suspend so it is turned on during suspend entry. + */ +#define REGUL_BOOT_ON BIT(1) +/* regulator-over-current-protection: Enable over current protection. */ +#define REGUL_OCP BIT(2) +/* regulator-active-discharge: enable active discharge. */ +#define REGUL_ACTIVE_DISCHARGE BIT(3) +/* regulator-pull-down: Enable pull down resistor when the regulator is disabled. */ +#define REGUL_PULL_DOWN BIT(4) +/* + * st,mask-reset: set mask reset for the regulator, meaning that the regulator + * setting is maintained during pmic reset. + */ +#define REGUL_MASK_RESET BIT(5) +/* st,regulator-sink-source: set the regulator in sink source mode */ +#define REGUL_SINK_SOURCE BIT(6) +/* st,regulator-bypass: set the regulator in bypass mode */ +#define REGUL_ENABLE_BYPASS BIT(7) + +struct rdev *regulator_get_by_name(const char *node_name); + +struct rdev *regulator_get_by_supply_name(const void *fdt, int node, const char *name); + +int regulator_enable(struct rdev *rdev); +int regulator_disable(struct rdev *rdev); +int regulator_is_enabled(const struct rdev *rdev); + +int regulator_set_voltage(struct rdev *rdev, uint16_t volt); +int regulator_set_min_voltage(struct rdev *rdev); +int regulator_get_voltage(const struct rdev *rdev); + +int regulator_list_voltages(const struct rdev *rdev, const uint16_t **levels, size_t *count); +void regulator_get_range(const struct rdev *rdev, uint16_t *min_mv, uint16_t *max_mv); +int regulator_set_flag(struct rdev *rdev, uint16_t flag); + +/* + * Driver Interface + */ + +/* set_state() arguments */ +#define STATE_DISABLE false +#define STATE_ENABLE true + +struct regul_description { + const char *node_name; + const struct regul_ops *ops; + const void *driver_data; + const char *supply_name; + const uint32_t enable_ramp_delay; +}; + +struct regul_ops { + int (*set_state)(const struct regul_description *desc, bool state); + int (*get_state)(const struct regul_description *desc); + int (*set_voltage)(const struct regul_description *desc, uint16_t mv); + int (*get_voltage)(const struct regul_description *desc); + int (*list_voltages)(const struct regul_description *desc, + const uint16_t **levels, size_t *count); + int (*set_flag)(const struct regul_description *desc, uint16_t flag); + void (*lock)(const struct regul_description *desc); + void (*unlock)(const struct regul_description *desc); +}; + +int regulator_register(const struct regul_description *desc, int node); + +/* + * Internal regulator structure + * The structure is internal to the core, and the content should not be used + * by a consumer nor a driver. + */ +struct rdev { + const struct regul_description *desc; + + int32_t phandle; + + uint16_t min_mv; + uint16_t max_mv; + + uint16_t flags; + + uint32_t enable_ramp_delay; +}; + +#endif /* REGULATOR_H */ -- cgit v1.2.3